[QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,
[QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,
[QUIRK_MIDI_NOVATION] = create_any_midi_quirk,
- [QUIRK_MIDI_MBOX2] = create_any_midi_quirk,
[QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk,
[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
[QUIRK_MIDI_CME] = create_any_midi_quirk,
#define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */
#define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */
-int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
+static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
{
struct usb_host_config *config = dev->actconfig;
int err;
- u8 bootresponse;
+ u8 bootresponse[12];
int fwsize;
int count;
snd_printd("usb-audio: Sending Digidesign Mbox 2 boot sequence...\n");
count = 0;
- bootresponse = MBOX2_BOOT_LOADING;
- while ((bootresponse == MBOX2_BOOT_LOADING) && (count < 10)) {
+ bootresponse[0] = MBOX2_BOOT_LOADING;
+ while ((bootresponse[0] == MBOX2_BOOT_LOADING) && (count < 10)) {
msleep(500); /* 0.5 second delay */
snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
/* Control magic - load onboard firmware */
0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012);
- if (bootresponse == MBOX2_BOOT_READY)
+ if (bootresponse[0] == MBOX2_BOOT_READY)
break;
snd_printd("usb-audio: device not ready, resending boot sequence...\n");
count++;
}
- if (bootresponse != MBOX2_BOOT_READY) {
- snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse);
+ if (bootresponse[0] != MBOX2_BOOT_READY) {
+ snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]);
return -ENODEV;
}
return 0; /* keep this altsetting */
}
-
static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip,
int iface, int altno)
{