This removes most of the dependencies between hid drivers and usbhid.
The patch was constructed by replacing all occurences of
usbhid_wait_io() by its hid_hw_wait() counterpart.
Then, drivers not requiring USB_HID anymore have their USB_HID
dependency cleaned in the Kconfig file.
As of today, few drivers are still requiring an explicit USB layer
dependency:
* ntrig (a patch is on its way)
* multitouch (one patch following and another on its way)
* lenovo tpkbd
* roccat
* sony
The last three are two deeply using direct calls to the usb subsystem
to be able to be cleaned right now.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
config HID_PICOLCD
tristate "PicoLCD (graphic version)"
- depends on USB_HID
+ depends on HID
---help---
This provides support for Minibox PicoLCD devices, currently
only the graphical ones are supported.
return -EINVAL;
hid_hw_request(hdev, report, HID_REQ_GET_REPORT);
- usbhid_wait_io(hdev);
+ hid_hw_wait(hdev);
return (int)report->field[0]->value[0];
}
if (report) {
/* Let the device settle to ensure the wakeup message gets
* through */
- usbhid_wait_io(hdev);
+ hid_hw_wait(hdev);
hid_hw_request(hdev, report, HID_REQ_GET_REPORT);
/*
#include <linux/hid.h>
#include <linux/vmalloc.h>
-#include "usbhid/usbhid.h"
#include <linux/fb.h>
#include <linux/module.h>
mutex_unlock(&info->lock);
if (!data)
return;
- usbhid_wait_io(data->hdev);
+ hid_hw_wait(data->hdev);
mutex_lock(&info->lock);
n = 0;
}
spin_unlock_irqrestore(&fbdata->lock, flags);
mutex_unlock(&info->lock);
if (data)
- usbhid_wait_io(data->hdev);
+ hid_hw_wait(data->hdev);
return;
}
out:
*/
#include <linux/device.h>
#include <linux/hid.h>
-#include "usbhid/usbhid.h"
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/mfd/core.h>
}
hid_set_field(report->field[field_index], 0, value);
hid_hw_request(hsdev->hdev, report, HID_REQ_SET_REPORT);
- usbhid_wait_io(hsdev->hdev);
+ hid_hw_wait(hsdev->hdev);
done_proc:
mutex_unlock(&data->mutex);
goto done_proc;
}
hid_hw_request(hsdev->hdev, report, HID_REQ_GET_REPORT);
- usbhid_wait_io(hsdev->hdev);
+ hid_hw_wait(hsdev->hdev);
*value = report->field[field_index]->value[0];
done_proc:
return 0;
}
-int usbhid_wait_io(struct hid_device *hid)
+static int usbhid_wait_io(struct hid_device *hid)
{
struct usbhid_device *usbhid = hid->driver_data;
return 0;
}
-EXPORT_SYMBOL_GPL(usbhid_wait_io);
static int hid_set_idle(struct usb_device *dev, int ifnum, int report, int idle)
{
pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0] = 0;
pidff->block_load_status->value[0] = 0;
- usbhid_wait_io(pidff->hid);
+ hid_hw_wait(pidff->hid);
for (j = 0; j < 60; j++) {
hid_dbg(pidff->hid, "pid_block_load requested\n");
hid_hw_request(pidff->hid, pidff->reports[PID_BLOCK_LOAD],
HID_REQ_GET_REPORT);
- usbhid_wait_io(pidff->hid);
+ hid_hw_wait(pidff->hid);
if (pidff->block_load_status->value[0] ==
pidff->status_id[PID_BLOCK_LOAD_SUCCESS]) {
hid_dbg(pidff->hid, "device reported free memory: %d bytes\n",
effect_id, pidff->pid_id[effect_id]);
/* Wait for the queue to clear. We do not want a full fifo to
prevent the effect removal. */
- usbhid_wait_io(pidff->hid);
+ hid_hw_wait(pidff->hid);
pidff_playback_pid(pidff, pid_id, 0);
pidff_erase_pid(pidff, pid_id);
pidff->device_control->value[0] = pidff->control_id[PID_RESET];
/* We reset twice as sometimes hid_wait_io isn't waiting long enough */
hid_hw_request(hid, pidff->reports[PID_DEVICE_CONTROL], HID_REQ_SET_REPORT);
- usbhid_wait_io(hid);
+ hid_hw_wait(hid);
hid_hw_request(hid, pidff->reports[PID_DEVICE_CONTROL], HID_REQ_SET_REPORT);
- usbhid_wait_io(hid);
+ hid_hw_wait(hid);
pidff->device_control->value[0] =
pidff->control_id[PID_ENABLE_ACTUATORS];
hid_hw_request(hid, pidff->reports[PID_DEVICE_CONTROL], HID_REQ_SET_REPORT);
- usbhid_wait_io(hid);
+ hid_hw_wait(hid);
/* pool report is sometimes messed up, refetch it */
hid_hw_request(hid, pidff->reports[PID_POOL], HID_REQ_GET_REPORT);
- usbhid_wait_io(hid);
+ hid_hw_wait(hid);
if (pidff->pool[PID_SIMULTANEOUS_MAX].value) {
while (pidff->pool[PID_SIMULTANEOUS_MAX].value[0] < 2) {
hid_dbg(pidff->hid, "pid_pool requested again\n");
hid_hw_request(hid, pidff->reports[PID_POOL],
HID_REQ_GET_REPORT);
- usbhid_wait_io(hid);
+ hid_hw_wait(hid);
}
}
}
break;
hid_hw_request(hid, report, HID_REQ_GET_REPORT);
- usbhid_wait_io(hid);
+ hid_hw_wait(hid);
r = 0;
break;
break;
hid_hw_request(hid, report, HID_REQ_SET_REPORT);
- usbhid_wait_io(hid);
+ hid_hw_wait(hid);
r = 0;
break;
#include <linux/input.h>
/* API provided by hid-core.c for USB HID drivers */
-int usbhid_wait_io(struct hid_device* hid);
void usbhid_close(struct hid_device *hid);
int usbhid_open(struct hid_device *hid);
void usbhid_init_reports(struct hid_device *hid);