Move this option to Kconfig and update all boards.
Signed-off-by: Simon Glass <sjg@chromium.org>
This option is enabled by default for U-Boot.
+config SYS_MALLOC_F
+ bool "Enable malloc() pool before relocation"
+ default 0x400
+ help
+ Before relocation memory is very limited on many platforms. Still,
+ we can provide a small malloc() pool if needed. Driver model in
+ particular needs this to operate, so that it can allocate the
+ initial serial device and any others that are needed.
+
+config SYS_MALLOC_F_LEN
+ hex "Size of malloc() pool before relocation"
+ depends on SYS_MALLOC_F
+ default 0x400
+ help
+ Before relocation memory is very limited on many platforms. Still,
+ we can provide a small malloc() pool if needed. Driver model in
+ particular needs this to operate, so that it can allocate the
+ initial serial device and any others that are needed.
+
menuconfig EXPERT
bool "Configure standard U-Boot features (expert users)"
help
config DM_GPIO
default y if !SPL_BUILD
+config SYS_MALLOC_F
+ default y if !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+ default 0x400 if !SPL_BUILD
+
source "board/samsung/smdkv310/Kconfig"
source "board/samsung/trats/Kconfig"
source "board/samsung/universal_c210/Kconfig"
config DM_SERIAL
default y if DM && !SPL_BUILD
+config SYS_MALLOC_F
+ default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+ default 0x400 if DM && !SPL_BUILD
+
config SYS_SOC
default "omap3"
endchoice
+config SYS_MALLOC_F
+ default y
+
+config SYS_MALLOC_F_LEN
+ default 0x1800
+
config USE_PRIVATE_LIBGCC
default y if SPL_BUILD
endchoice
+config SYS_MALLOC_F
+ default y
+
+config SYS_MALLOC_F_LEN
+ default 0x2000
+
config CMD_PINMON
bool "Enable boot mode pins monitor command"
default y
config DM_SERIAL
default y
+config SYS_MALLOC_F
+ default y
+
+config SYS_MALLOC_F_LEN
+ default 0x800
+
config RAMBASE
hex
default 0x100000
config DM_SERIAL
default y if DM && !SPL_BUILD
+config SYS_MALLOC_F
+ default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+ default 0x400 if DM && !SPL_BUILD
+
endif
+S:CONFIG_DRAM_CLK=480
+S:CONFIG_DRAM_ZQ=122
+S:CONFIG_DRAM_EMR1=4
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_AM335X_IGEP0033=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_DM=y
CONFIG_DM_GPIO=y
CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_CM_T335=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_GW_VENTANA=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL"
CONFIG_ARM=y
CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q"
CONFIG_ARM=y
CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q"
CONFIG_ARM=y
CONFIG_TARGET_MX6SABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX"
CONFIG_ARM=y
CONFIG_TARGET_MX6SXSABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_DM=n
CONFIG_DM_SERIAL=n
CONFIG_DM_GPIO=n
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_SYS_EXTRA_OPTIONS="REV1"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PCM051=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_SYS_EXTRA_OPTIONS="REV3"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PCM051=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PENGWYN=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PEPPER=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_ARM=y
CONFIG_TARGET_RPI=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_ARCH_S5PC1XX=y
CONFIG_TARGET_S5P_GONI=y
CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_FIT_SIGNATURE=y
CONFIG_DM=y
CONFIG_DEFAULT_DEVICE_TREE="sandbox"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_TARGET_SMDKC100=y
CONFIG_ARCH_S5PC1XX=y
CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_DM=y
CONFIG_DM_GPIO=y
CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_DM=y
CONFIG_DM_GPIO=y
CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_SYS_EXTRA_OPTIONS="stv0991"
CONFIG_ARM=y
CONFIG_TARGET_STV0991=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
#define CONFIG_MACH_TYPE 4273
#ifndef CONFIG_SPL_BUILD
-
#define CONFIG_CMD_GPIO
-
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
/* Display information on boot */
#define CONFIG_ENV_OVERWRITE
/* Size of malloc() pool before and after relocation */
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20))
/* select serial console configuration */
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/* Init Functions */
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DM
#define CONFIG_DM_THERMAL
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_IMX6_THERMAL
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_DM
#define CONFIG_DM_THERMAL
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_IMX6_THERMAL
#define CONFIG_CMD_FUSE
#define CONFIG_UBI_SIZE (512 << 10)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
(128 << 10))
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/*
* Hardware drivers
#define CONFIG_SYS_MEMTEST_END 0x20000000
#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/* SPL */
#define CONFIG_SPL_FAT_SUPPORT
CONFIG_SYS_SDRAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_MALLOC_LEN SZ_4M
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_MEMTEST_START 0x00100000
#define CONFIG_SYS_MEMTEST_END 0x00200000
#define CONFIG_LOADADDR 0x00200000
#define CONFIG_CMDLINE_EDITING
/* Size of malloc() pool before and after relocation */
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20))
/*
/*
* Size of malloc() pool, before and after relocation
*/
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_MALLOC_F_ADDR 0x0010000
#define CONFIG_SYS_MALLOC_LEN (32 << 20) /* 32MB */
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
-/* Small malloc pool before relocation */
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
-
/*
* select serial console configuration
*/
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/* CPU */
#define CONFIG_ARCH_CPU_INIT
(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN 0x2000
#define CONFIG_DM
/* serial port (PL011) configuration */
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM)
# define CONFIG_DW_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
/*
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */
#ifndef CONFIG_SPL_BUILD
# define CONFIG_OMAP_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
#include <asm/arch/omap.h>
#ifndef CONFIG_SPL_BUILD
# define CONFIG_OMAP_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
/* The chip has SDRC controller */
#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE
#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SYS_MALLOC_F_LEN 0x2000
-
/*-----------------------------------------------------------------------
* MMU and Cache Setting
*----------------------------------------------------------------------*/
#define CONFIG_SYS_STACK_SIZE (32 * 1024)
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN 0x200000
-#define CONFIG_SYS_MALLOC_F_LEN (2 << 10)
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE