#include <media/v4l2-event.h>
#include <media/cx2341x.h>
#include <media/tuner.h>
-#include <linux/usb.h>
#define CX231xx_FIRM_IMAGE_SIZE 376836
#define CX231xx_FIRM_IMAGE_NAME "v4l-cx23885-enc.fw"
IVTV_REG_APU, 0);
if (retval != 0) {
- pr_err("%s: Error with mc417_register_write\n", __func__);
+ dev_err(&dev->udev->dev,
+ "%s: Error with mc417_register_write\n", __func__);
return -1;
}
&dev->udev->dev);
if (retval != 0) {
- pr_err("ERROR: Hotplug firmware request failed (%s).\n",
+ dev_err(&dev->udev->dev,
+ "ERROR: Hotplug firmware request failed (%s).\n",
CX231xx_FIRM_IMAGE_NAME);
- pr_err("Please fix your hotplug setup, the board will not work without firmware loaded!\n");
+ dev_err(&dev->udev->dev,
+ "Please fix your hotplug setup, the board will not work without firmware loaded!\n");
return -1;
}
if (firmware->size != CX231xx_FIRM_IMAGE_SIZE) {
- pr_err("ERROR: Firmware size mismatch (have %zd, expected %d)\n",
+ dev_err(&dev->udev->dev,
+ "ERROR: Firmware size mismatch (have %zd, expected %d)\n",
firmware->size, CX231xx_FIRM_IMAGE_SIZE);
release_firmware(firmware);
return -1;
}
if (0 != memcmp(firmware->data, magic, 8)) {
- pr_err("ERROR: Firmware magic mismatch, wrong file?\n");
+ dev_err(&dev->udev->dev,
+ "ERROR: Firmware magic mismatch, wrong file?\n");
release_firmware(firmware);
return -1;
}
retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS,
IVTV_CMD_HW_BLOCKS_RST);
if (retval < 0) {
- pr_err("%s: Error with mc417_register_write\n",
+ dev_err(&dev->udev->dev,
+ "%s: Error with mc417_register_write\n",
__func__);
return retval;
}
retval |= mc417_register_write(dev, IVTV_REG_VPU, value & 0xFFFFFFE8);
if (retval < 0) {
- pr_err("%s: Error with mc417_register_write\n",
+ dev_err(&dev->udev->dev,
+ "%s: Error with mc417_register_write\n",
__func__);
return retval;
}
dprintk(2, "%s: PING OK\n", __func__);
retval = cx231xx_load_firmware(dev);
if (retval < 0) {
- pr_err("%s: f/w load failed\n", __func__);
+ dev_err(&dev->udev->dev,
+ "%s: f/w load failed\n", __func__);
return retval;
}
retval = cx231xx_find_mailbox(dev);
if (retval < 0) {
- pr_err("%s: mailbox < 0, error\n",
+ dev_err(&dev->udev->dev, "%s: mailbox < 0, error\n",
__func__);
return -1;
}
dev->cx23417_mailbox = retval;
retval = cx231xx_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0);
if (retval < 0) {
- pr_err("ERROR: cx23417 firmware ping failed!\n");
+ dev_err(&dev->udev->dev,
+ "ERROR: cx23417 firmware ping failed!\n");
return -1;
}
retval = cx231xx_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1,
&version);
if (retval < 0) {
- pr_err("ERROR: cx23417 firmware get encoder: version failed!\n");
+ dev_err(&dev->udev->dev,
+ "ERROR: cx23417 firmware get encoder: version failed!\n");
return -1;
}
dprintk(1, "cx23417 firmware version is 0x%08x\n", version);
if (!dev->video_mode.bulk_ctl.num_bufs)
urb_init = 1;
}
- /*pr_info("urb_init=%d dev->video_mode.max_pkt_size=%d\n",
- urb_init, dev->video_mode.max_pkt_size);*/
+ dev_dbg(&dev->udev->dev,
+ "urb_init=%d dev->video_mode.max_pkt_size=%d\n",
+ urb_init, dev->video_mode.max_pkt_size);
dev->mode_tv = 1;
if (urb_init) {
#include "cx231xx.h"
#include <linux/kernel.h>
-#include <linux/usb.h>
#include <linux/init.h>
#include <linux/sound.h>
#include <linux/spinlock.h>
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status < 0) {
- pr_err("resubmit of audio urb failed (error=%i)\n",
- status);
+ dev_err(&dev->udev->dev,
+ "resubmit of audio urb failed (error=%i)\n",
+ status);
}
return;
}
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status < 0) {
- pr_err("resubmit of audio urb failed (error=%i)\n",
- status);
+ dev_err(&dev->udev->dev,
+ "resubmit of audio urb failed (error=%i)\n",
+ status);
}
return;
}
int i, errCode;
int sb_size;
- pr_debug("%s: Starting ISO AUDIO transfers\n", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: Starting ISO AUDIO transfers\n", __func__);
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
memset(dev->adev.transfer_buffer[i], 0x80, sb_size);
urb = usb_alloc_urb(CX231XX_ISO_NUM_AUDIO_PACKETS, GFP_ATOMIC);
if (!urb) {
- pr_err("usb_alloc_urb failed!\n");
+ dev_err(&dev->udev->dev, "usb_alloc_urb failed!\n");
for (j = 0; j < i; j++) {
usb_free_urb(dev->adev.urb[j]);
kfree(dev->adev.transfer_buffer[j]);
int i, errCode;
int sb_size;
- pr_debug("%s: Starting BULK AUDIO transfers\n", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: Starting BULK AUDIO transfers\n", __func__);
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
memset(dev->adev.transfer_buffer[i], 0x80, sb_size);
urb = usb_alloc_urb(CX231XX_NUM_AUDIO_PACKETS, GFP_ATOMIC);
if (!urb) {
- pr_err("usb_alloc_urb failed!\n");
+ dev_err(&dev->udev->dev, "usb_alloc_urb failed!\n");
for (j = 0; j < i; j++) {
usb_free_urb(dev->adev.urb[j]);
kfree(dev->adev.transfer_buffer[j]);
dprintk("opening device and trying to acquire exclusive lock\n");
if (!dev) {
- pr_err("BUG: cx231xx can't find device struct. Can't proceed with open\n");
+ dev_err(&dev->udev->dev,
+ "BUG: cx231xx can't find device struct. Can't proceed with open\n");
return -ENODEV;
}
if (dev->state & DEV_DISCONNECTED) {
- pr_err("Can't open. the device was removed.\n");
+ dev_err(&dev->udev->dev,
+ "Can't open. the device was removed.\n");
return -ENODEV;
}
ret = cx231xx_set_alt_setting(dev, INDEX_AUDIO, 0);
mutex_unlock(&dev->lock);
if (ret < 0) {
- pr_err("failed to set alternate setting !\n");
+ dev_err(&dev->udev->dev,
+ "failed to set alternate setting !\n");
return ret;
}
/* 1 - 48000 samples per sec */
ret = cx231xx_set_alt_setting(dev, INDEX_AUDIO, 0);
if (ret < 0) {
- pr_err("failed to set alternate setting !\n");
+ dev_err(&dev->udev->dev,
+ "failed to set alternate setting !\n");
mutex_unlock(&dev->lock);
return ret;
return 0;
}
- pr_debug("probing for cx231xx non standard usbaudio\n");
+ dev_dbg(&dev->udev->dev,
+ "probing for cx231xx non standard usbaudio\n");
err = snd_card_new(&dev->udev->dev, index[devnr], "Cx231xx Audio",
THIS_MODULE, 0, &card);
bEndpointAddress;
adev->num_alt = uif->num_altsetting;
- pr_info("audio EndPoint Addr 0x%x, Alternate settings: %i\n",
+ dev_info(&dev->udev->dev,
+ "audio EndPoint Addr 0x%x, Alternate settings: %i\n",
adev->end_point_addr, adev->num_alt);
adev->alt_max_pkt_size = kmalloc(32 * adev->num_alt, GFP_KERNEL);
wMaxPacketSize);
adev->alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_debug("audio alternate setting %i, max size= %i\n", i,
- adev->alt_max_pkt_size[i]);
+ dev_dbg(&dev->udev->dev,
+ "audio alternate setting %i, max size= %i\n", i,
+ adev->alt_max_pkt_size[i]);
}
return 0;
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/bitmap.h>
-#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/mm.h>
#include <linux/mutex.h>
cx231xx_send_gpio_cmd(dev, _gpio_direction, (u8 *)&value, 4, 0, 0);
verve_read_byte(dev, 0x07, &val);
- pr_debug("verve_read_byte address0x07=0x%x\n", val);
+ dev_dbg(&dev->udev->dev, "verve_read_byte address0x07=0x%x\n", val);
verve_write_byte(dev, 0x07, 0xF4);
verve_read_byte(dev, 0x07, &val);
- pr_debug("verve_read_byte address0x07=0x%x\n", val);
+ dev_dbg(&dev->udev->dev, "verve_read_byte address0x07=0x%x\n", val);
cx231xx_capture_start(dev, 1, Vbi);
while (afe_power_status != 0x18) {
status = afe_write_byte(dev, SUP_BLK_PWRDN, 0x18);
if (status < 0) {
- pr_debug("%s: Init Super Block failed in send cmd\n",
+ dev_dbg(&dev->udev->dev,
+ "%s: Init Super Block failed in send cmd\n",
__func__);
break;
}
status = afe_read_byte(dev, SUP_BLK_PWRDN, &afe_power_status);
afe_power_status &= 0xff;
if (status < 0) {
- pr_debug("%s: Init Super Block failed in receive cmd\n",
+ dev_dbg(&dev->udev->dev,
+ "%s: Init Super Block failed in receive cmd\n",
__func__);
break;
}
i++;
if (i == 10) {
- pr_debug("%s: Init Super Block force break in loop !!!!\n",
+ dev_dbg(&dev->udev->dev,
+ "%s: Init Super Block force break in loop !!!!\n",
__func__);
status = -1;
break;
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
0x00);
} else {
- pr_debug("Invalid AV mode input\n");
+ dev_dbg(&dev->udev->dev, "Invalid AV mode input\n");
status = -1;
}
break;
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
0x40);
} else {
- pr_debug("Invalid AV mode input\n");
+ dev_dbg(&dev->udev->dev, "Invalid AV mode input\n");
status = -1;
}
} /* switch */
status = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ENXTERNAL_AV);
if (status < 0) {
- pr_err("%s: set_power_mode : Failed to"
- " set Power - errCode [%d]!\n",
- __func__, status);
+ dev_err(&dev->udev->dev,
+ "%s: Failed to set Power - errCode [%d]!\n",
+ __func__, status);
return status;
}
}
status = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ANALOGT_TV);
if (status < 0) {
- pr_err("%s: set_power_mode:Failed"
- " to set Power - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: Failed to set Power - errCode [%d]!\n",
__func__, status);
return status;
}
break;
default:
- pr_err("%s: set_power_mode : Unknown Input %d !\n",
- __func__, INPUT(input)->type);
+ dev_err(&dev->udev->dev, "%s: Unknown Input %d !\n",
+ __func__, INPUT(input)->type);
break;
}
if (pin_type != dev->video_input) {
status = cx231xx_afe_adjust_ref_count(dev, pin_type);
if (status < 0) {
- pr_err("%s: adjust_ref_count :Failed to set AFE input mux - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: adjust_ref_count :Failed to set AFE input mux - errCode [%d]!\n",
__func__, status);
return status;
}
/* call afe block to set video inputs */
status = cx231xx_afe_set_input_mux(dev, input);
if (status < 0) {
- pr_err("%s: set_input_mux :Failed to set AFE input mux - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: set_input_mux :Failed to set AFE input mux - errCode [%d]!\n",
__func__, status);
return status;
}
/* Tell DIF object to go to baseband mode */
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (status < 0) {
- pr_err("%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
__func__, status);
return status;
}
/* Tell DIF object to go to baseband mode */
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (status < 0) {
- pr_err("%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
__func__, status);
return status;
}
status = cx231xx_dif_set_standard(dev,
DIF_USE_BASEBAND);
if (status < 0) {
- pr_err("%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
__func__, status);
return status;
}
/* Reinitialize the DIF */
status = cx231xx_dif_set_standard(dev, dev->norm);
if (status < 0) {
- pr_err("%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
__func__, status);
return status;
}
{
int status = 0;
- pr_debug("%s: 0x%x\n",
+ dev_dbg(&dev->udev->dev, "%s: 0x%x\n",
__func__, (unsigned int)dev->norm);
/* Change the DFE_CTRL3 bp_percent to fix flagging */
status = vid_blk_write_word(dev, DFE_CTRL3, 0xCD3F0280);
if (dev->norm & (V4L2_STD_NTSC | V4L2_STD_PAL_M)) {
- pr_debug("%s: NTSC\n", __func__);
+ dev_dbg(&dev->udev->dev, "%s: NTSC\n", __func__);
/* Move the close caption lines out of active video,
adjust the active video start point */
(FLD_HBLANK_CNT, 0x79));
} else if (dev->norm & V4L2_STD_SECAM) {
- pr_debug("%s: SECAM\n", __func__);
+ dev_dbg(&dev->udev->dev, "%s: SECAM\n", __func__);
status = cx231xx_read_modify_write_i2c_dword(dev,
VID_BLK_I2C_ADDRESS,
VERT_TIM_CTRL,
cx231xx_set_field
(FLD_HBLANK_CNT, 0x85));
} else {
- pr_debug("%s: PAL\n", __func__);
+ dev_dbg(&dev->udev->dev, "%s: PAL\n", __func__);
status = cx231xx_read_modify_write_i2c_dword(dev,
VID_BLK_I2C_ADDRESS,
VERT_TIM_CTRL,
for (i = 0x100; i < 0x140; i++) {
vid_blk_read_word(dev, i, &value);
- pr_debug("reg0x%x=0x%x\n", i, value);
+ dev_dbg(&dev->udev->dev, "reg0x%x=0x%x\n", i, value);
i = i+3;
}
for (i = 0x300; i < 0x400; i++) {
vid_blk_read_word(dev, i, &value);
- pr_debug("reg0x%x=0x%x\n", i, value);
+ dev_dbg(&dev->udev->dev, "reg0x%x=0x%x\n", i, value);
i = i+3;
}
for (i = 0x400; i < 0x440; i++) {
vid_blk_read_word(dev, i, &value);
- pr_debug("reg0x%x=0x%x\n", i, value);
+ dev_dbg(&dev->udev->dev, "reg0x%x=0x%x\n", i, value);
i = i+3;
}
vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value);
- pr_debug("AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
+ dev_dbg(&dev->udev->dev, "AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
vid_blk_write_word(dev, AFE_CTRL_C2HH_SRC_CTRL, 0x4485D390);
vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value);
- pr_debug("AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
+ dev_dbg(&dev->udev->dev, "AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
}
#if 0
static void cx231xx_dump_SC_reg(struct cx231xx *dev)
{
u8 value[4] = { 0, 0, 0, 0 };
- pr_debug("%s!\n", __func__);
+ dev_dbg(&dev->udev->dev, "%s!\n", __func__);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, BOARD_CFG_STAT,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", BOARD_CFG_STAT, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", BOARD_CFG_STAT, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS_MODE_REG,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS_MODE_REG, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS_MODE_REG, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS1_CFG_REG,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_CFG_REG, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_CFG_REG, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS1_LENGTH_REG,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_LENGTH_REG, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_LENGTH_REG, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS2_CFG_REG,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_CFG_REG, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_CFG_REG, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS2_LENGTH_REG,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_LENGTH_REG, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_LENGTH_REG, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", EP_MODE_SET, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", EP_MODE_SET, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN1,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN1, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN1, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN2,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN2, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN2, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN3,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN3, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN3, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK0,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK0, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK0, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK1,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK1, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK1, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK2,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK2, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK2, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_GAIN,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_GAIN, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_GAIN, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_CAR_REG,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_CAR_REG, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_CAR_REG, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_OT_CFG1,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG1, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG1, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_OT_CFG2,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG2, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG2, value[0],
+ value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN,
value, 4);
- pr_debug("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN, value[0],
- value[1], value[2], value[3]);
+ dev_dbg(&dev->udev->dev,
+ "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN, value[0],
+ value[1], value[2], value[3]);
}
#endif
u32 standard = 0;
u8 value[4] = { 0, 0, 0, 0 };
- pr_debug("Enter cx231xx_set_Colibri_For_LowIF()\n");
+ dev_dbg(&dev->udev->dev, "Enter cx231xx_set_Colibri_For_LowIF()\n");
value[0] = (u8) 0x6F;
value[1] = (u8) 0x6F;
value[2] = (u8) 0x6F;
colibri_carrier_offset = cx231xx_Get_Colibri_CarrierOffset(mode,
standard);
- pr_debug("colibri_carrier_offset=%d, standard=0x%x\n",
+ dev_dbg(&dev->udev->dev, "colibri_carrier_offset=%d, standard=0x%x\n",
colibri_carrier_offset, standard);
/* Set the band Pass filter for DIF*/
u64 pll_freq_u64 = 0;
u32 i = 0;
- pr_debug("if_freq=%d;spectral_invert=0x%x;mode=0x%x\n",
- if_freq, spectral_invert, mode);
+ dev_dbg(&dev->udev->dev, "if_freq=%d;spectral_invert=0x%x;mode=0x%x\n",
+ if_freq, spectral_invert, mode);
if (mode == TUNER_MODE_FM_RADIO) {
if_freq = 16000000;
}
- pr_debug("Enter IF=%zu\n",
- ARRAY_SIZE(Dif_set_array));
+ dev_dbg(&dev->udev->dev, "Enter IF=%zu\n", ARRAY_SIZE(Dif_set_array));
for (i = 0; i < ARRAY_SIZE(Dif_set_array); i++) {
if (Dif_set_array[i].if_freq == if_freq) {
vid_blk_write_word(dev,
u32 dif_misc_ctrl_value = 0;
u32 func_mode = 0;
- pr_debug("%s: setStandard to %x\n", __func__, standard);
+ dev_dbg(&dev->udev->dev, "%s: setStandard to %x\n", __func__, standard);
status = vid_blk_read_word(dev, DIF_MISC_CTRL, &dif_misc_ctrl_value);
if (standard != DIF_USE_BASEBAND)
{
int status = 0;
u32 dwval;
- pr_debug("%s: dev->tuner_type =0%d\n",
- __func__, dev->tuner_type);
+ dev_dbg(&dev->udev->dev, "%s: dev->tuner_type =0%d\n",
+ __func__, dev->tuner_type);
/* Set the RF and IF k_agc values to 4 for PAL/NTSC and 8 for
* SECAM L/B/D standards */
status = vid_blk_read_word(dev, DIF_AGC_IF_REF, &dwval);
if (dev->power_mode != mode)
dev->power_mode = mode;
else {
- pr_debug("%s: mode = %d, No Change req.\n",
+ dev_dbg(&dev->udev->dev, "%s: mode = %d, No Change req.\n",
__func__, mode);
return 0;
}
u32 tmp = 0;
int status = 0;
- pr_debug("%s: ep_mask = %x\n", __func__, ep_mask);
+ dev_dbg(&dev->udev->dev, "%s: ep_mask = %x\n", __func__, ep_mask);
status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET,
value, 4);
if (status < 0)
u32 tmp = 0;
int status = 0;
- pr_debug("%s: ep_mask = %x\n", __func__, ep_mask);
+ dev_dbg(&dev->udev->dev, "%s: ep_mask = %x\n", __func__, ep_mask);
status =
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET, value, 4);
if (status < 0)
if (dev->udev->speed == USB_SPEED_HIGH) {
switch (media_type) {
case Audio:
- pr_debug("%s: Audio enter HANC\n", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: Audio enter HANC\n", __func__);
status =
cx231xx_mode_register(dev, TS_MODE_REG, 0x9300);
break;
case Vbi:
- pr_debug("%s: set vanc registers\n", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: set vanc registers\n", __func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x300);
break;
case Sliced_cc:
- pr_debug("%s: set hanc registers\n", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: set hanc registers\n", __func__);
status =
cx231xx_mode_register(dev, TS_MODE_REG, 0x1300);
break;
case Raw_Video:
- pr_debug("%s: set video registers\n", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: set video registers\n", __func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
break;
case TS1_serial_mode:
- pr_debug("%s: set ts1 registers", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: set ts1 registers", __func__);
if (dev->board.has_417) {
- pr_debug("%s: MPEG\n", __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: MPEG\n", __func__);
value &= 0xFFFFFFFC;
value |= 0x3;
VRT_SET_REGISTER,
TS1_LENGTH_REG, val, 4);
} else {
- pr_debug("%s: BDA\n", __func__);
+ dev_dbg(&dev->udev->dev, "%s: BDA\n", __func__);
status = cx231xx_mode_register(dev,
TS_MODE_REG, 0x101);
status = cx231xx_mode_register(dev,
break;
case TS1_parallel_mode:
- pr_debug("%s: set ts1 parallel mode registers\n",
- __func__);
+ dev_dbg(&dev->udev->dev,
+ "%s: set ts1 parallel mode registers\n",
+ __func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x400);
break;
(nCnt > 0));
if (nCnt == 0)
- pr_debug("No ACK after %d msec -GPIO I2C failed!",
- nInit * 10);
+ dev_dbg(&dev->udev->dev,
+ "No ACK after %d msec -GPIO I2C failed!",
+ nInit * 10);
/*
* readAck
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/i2c.h>
-#include <linux/usb.h>
#include <media/tuner.h>
#include <media/tveeprom.h>
#include <media/v4l2-common.h>
if (dev->tuner_type == TUNER_XC5000) {
if (command == XC5000_TUNER_RESET) {
- pr_debug("Tuner CB: RESET: cmd %d : tuner type %d \n",
- command, dev->tuner_type);
+ dev_dbg(&dev->udev->dev,
+ "Tuner CB: RESET: cmd %d : tuner type %d\n",
+ command, dev->tuner_type);
cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit,
1);
msleep(10);
cx231xx_set_model(dev);
- pr_info("Identified as %s (card=%d)\n",
+ dev_info(&dev->udev->dev, "Identified as %s (card=%d)\n",
dev->board.name, dev->model);
/* set the direction for GPIO pins */
/* start reading at offset 0 */
ret = i2c_transfer(client->adapter, &msg_write, 1);
if (ret < 0) {
- pr_err("Can't read eeprom\n");
+ dev_err(&dev->udev->dev, "Can't read eeprom\n");
return ret;
}
ret = i2c_transfer(client->adapter, &msg_read, 1);
if (ret < 0) {
- pr_err("Can't read eeprom\n");
+ dev_err(&dev->udev->dev, "Can't read eeprom\n");
return ret;
}
eedata_cur += msg_read.len;
}
for (i = 0; i + 15 < len; i += 16)
- pr_debug("i2c eeprom %02x: %*ph\n", i, 16, &eedata[i]);
+ dev_dbg(&dev->udev->dev, "i2c eeprom %02x: %*ph\n",
+ i, 16, &eedata[i]);
return 0;
}
cx231xx_get_i2c_adap(dev, I2C_0),
"cx25840", 0x88 >> 1, NULL);
if (dev->sd_cx25840 == NULL)
- pr_err("cx25840 subdev registration failure\n");
+ dev_err(&dev->udev->dev,
+ "cx25840 subdev registration failure\n");
cx25840_call(dev, core, load_fw);
}
"tuner",
dev->tuner_addr, NULL);
if (dev->sd_tuner == NULL)
- pr_err("tuner subdev registration failure\n");
+ dev_err(&dev->udev->dev,
+ "tuner subdev registration failure\n");
else
cx231xx_config_tuner(dev);
}
/* Query cx231xx to find what pcb config it is related to */
retval = initialize_cx231xx(dev);
if (retval < 0) {
- pr_err("Failed to read PCB config\n");
+ dev_err(&udev->dev, "Failed to read PCB config\n");
return retval;
}
retval = cx231xx_config(dev);
if (retval) {
- pr_err("error configuring device\n");
+ dev_err(&udev->dev, "error configuring device\n");
return -ENOMEM;
}
/* register i2c bus */
retval = cx231xx_dev_init(dev);
if (retval) {
- pr_err("%s: cx231xx_i2c_register - errCode [%d]!\n",
- __func__, retval);
+ dev_err(&udev->dev,
+ "%s: cx231xx_i2c_register - errCode [%d]!\n",
+ __func__, retval);
goto err_dev_init;
}
retval = cx231xx_config(dev);
if (retval) {
- pr_err("%s: cx231xx_config - errCode [%d]!\n",
+ dev_err(&udev->dev, "%s: cx231xx_config - errCode [%d]!\n",
__func__, retval);
goto err_dev_init;
}
/* compute alternate max packet sizes for video */
idx = dev->current_pcb_config.hs_config_info[0].interface_info.video_index + 1;
if (idx >= dev->max_iad_interface_count) {
- pr_err("Video PCB interface #%d doesn't exist\n", idx);
+ dev_err(&dev->udev->dev,
+ "Video PCB interface #%d doesn't exist\n", idx);
return -ENODEV;
}
dev->video_mode.end_point_addr = uif->altsetting[0].endpoint[isoc_pipe].desc.bEndpointAddress;
dev->video_mode.num_alt = uif->num_altsetting;
- pr_info("video EndPoint Addr 0x%x, Alternate settings: %i\n",
- dev->video_mode.end_point_addr,
- dev->video_mode.num_alt);
+ dev_info(&dev->udev->dev,
+ "video EndPoint Addr 0x%x, Alternate settings: %i\n",
+ dev->video_mode.end_point_addr,
+ dev->video_mode.num_alt);
dev->video_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->video_mode.num_alt, GFP_KERNEL);
if (dev->video_mode.alt_max_pkt_size == NULL)
for (i = 0; i < dev->video_mode.num_alt; i++) {
u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
dev->video_mode.alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_debug("Alternate setting %i, max size= %i\n", i,
- dev->video_mode.alt_max_pkt_size[i]);
+ dev_dbg(&dev->udev->dev,
+ "Alternate setting %i, max size= %i\n", i,
+ dev->video_mode.alt_max_pkt_size[i]);
}
/* VBI Init */
idx = dev->current_pcb_config.hs_config_info[0].interface_info.vanc_index + 1;
if (idx >= dev->max_iad_interface_count) {
- pr_err("VBI PCB interface #%d doesn't exist\n", idx);
+ dev_err(&dev->udev->dev,
+ "VBI PCB interface #%d doesn't exist\n", idx);
return -ENODEV;
}
uif = udev->actconfig->interface[idx];
bEndpointAddress;
dev->vbi_mode.num_alt = uif->num_altsetting;
- pr_info("VBI EndPoint Addr 0x%x, Alternate settings: %i\n",
- dev->vbi_mode.end_point_addr,
- dev->vbi_mode.num_alt);
+ dev_info(&dev->udev->dev,
+ "VBI EndPoint Addr 0x%x, Alternate settings: %i\n",
+ dev->vbi_mode.end_point_addr,
+ dev->vbi_mode.num_alt);
/* compute alternate max packet sizes for vbi */
dev->vbi_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->vbi_mode.num_alt, GFP_KERNEL);
desc.wMaxPacketSize);
dev->vbi_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_debug("Alternate setting %i, max size= %i\n", i,
- dev->vbi_mode.alt_max_pkt_size[i]);
+ dev_dbg(&dev->udev->dev,
+ "Alternate setting %i, max size= %i\n", i,
+ dev->vbi_mode.alt_max_pkt_size[i]);
}
/* Sliced CC VBI init */
/* compute alternate max packet sizes for sliced CC */
idx = dev->current_pcb_config.hs_config_info[0].interface_info.hanc_index + 1;
if (idx >= dev->max_iad_interface_count) {
- pr_err("Sliced CC PCB interface #%d doesn't exist\n", idx);
+ dev_err(&dev->udev->dev,
+ "Sliced CC PCB interface #%d doesn't exist\n", idx);
return -ENODEV;
}
uif = udev->actconfig->interface[idx];
bEndpointAddress;
dev->sliced_cc_mode.num_alt = uif->num_altsetting;
- pr_info("sliced CC EndPoint Addr 0x%x, Alternate settings: %i\n",
- dev->sliced_cc_mode.end_point_addr,
- dev->sliced_cc_mode.num_alt);
+ dev_info(&dev->udev->dev,
+ "sliced CC EndPoint Addr 0x%x, Alternate settings: %i\n",
+ dev->sliced_cc_mode.end_point_addr,
+ dev->sliced_cc_mode.num_alt);
dev->sliced_cc_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->sliced_cc_mode.num_alt, GFP_KERNEL);
if (dev->sliced_cc_mode.alt_max_pkt_size == NULL)
return -ENOMEM;
desc.wMaxPacketSize);
dev->sliced_cc_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_debug("Alternate setting %i, max size= %i\n", i,
- dev->sliced_cc_mode.alt_max_pkt_size[i]);
+ dev_dbg(&dev->udev->dev,
+ "Alternate setting %i, max size= %i\n", i,
+ dev->sliced_cc_mode.alt_max_pkt_size[i]);
}
return 0;
struct usb_interface_assoc_descriptor *assoc_desc;
ifnum = interface->altsetting[0].desc.bInterfaceNumber;
+ udev = usb_get_dev(interface_to_usbdev(interface));
/*
* Interface number 0 - IR interface (handled by mceusb driver)
nr = find_first_zero_bit(&cx231xx_devused, CX231XX_MAXBOARDS);
if (nr >= CX231XX_MAXBOARDS) {
/* No free device slots */
- pr_err("Supports only %i devices.\n", CX231XX_MAXBOARDS);
+ dev_err(&udev->dev,
+ "Supports only %i devices.\n",
+ CX231XX_MAXBOARDS);
return -ENOMEM;
}
} while (test_and_set_bit(nr, &cx231xx_devused));
- udev = usb_get_dev(interface_to_usbdev(interface));
-
/* allocate memory for our device state and initialize it */
dev = devm_kzalloc(&udev->dev, sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
speed = "unknown";
}
- pr_info("New device %s %s @ %s Mbps (%04x:%04x) with %d interfaces\n",
- udev->manufacturer ? udev->manufacturer : "",
- udev->product ? udev->product : "",
- speed,
- le16_to_cpu(udev->descriptor.idVendor),
- le16_to_cpu(udev->descriptor.idProduct),
- dev->max_iad_interface_count);
+ dev_info(&udev->dev,
+ "New device %s %s @ %s Mbps (%04x:%04x) with %d interfaces\n",
+ udev->manufacturer ? udev->manufacturer : "",
+ udev->product ? udev->product : "",
+ speed,
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct),
+ dev->max_iad_interface_count);
/* increment interface count */
dev->interface_count++;
assoc_desc = udev->actconfig->intf_assoc[0];
if (assoc_desc->bFirstInterface != ifnum) {
- pr_err("Not found matching IAD interface\n");
+ dev_err(&udev->dev, "Not found matching IAD interface\n");
retval = -ENODEV;
goto err_if;
}
- pr_debug("registering interface %d\n", ifnum);
+ dev_dbg(&udev->dev, "registering interface %d\n", ifnum);
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
/* Create v4l2 device */
retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
if (retval) {
- pr_err("v4l2_device_register failed\n");
+ dev_err(&udev->dev, "v4l2_device_register failed\n");
goto err_v4l2;
}
/* compute alternate max packet sizes for TS1 */
idx = dev->current_pcb_config.hs_config_info[0].interface_info.ts1_index + 1;
if (idx >= dev->max_iad_interface_count) {
- pr_err("TS1 PCB interface #%d doesn't exist\n", idx);
+ dev_err(&udev->dev,
+ "TS1 PCB interface #%d doesn't exist\n", idx);
retval = -ENODEV;
goto err_video_alt;
}
desc.bEndpointAddress;
dev->ts1_mode.num_alt = uif->num_altsetting;
- pr_info("TS EndPoint Addr 0x%x, Alternate settings: %i\n",
- dev->ts1_mode.end_point_addr,
- dev->ts1_mode.num_alt);
+ dev_info(&udev->dev,
+ "TS EndPoint Addr 0x%x, Alternate settings: %i\n",
+ dev->ts1_mode.end_point_addr,
+ dev->ts1_mode.num_alt);
dev->ts1_mode.alt_max_pkt_size = devm_kmalloc_array(&udev->dev, 32, dev->ts1_mode.num_alt, GFP_KERNEL);
if (dev->ts1_mode.alt_max_pkt_size == NULL) {
wMaxPacketSize);
dev->ts1_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- pr_debug("Alternate setting %i, max size= %i\n", i,
- dev->ts1_mode.alt_max_pkt_size[i]);
+ dev_dbg(&udev->dev,
+ "Alternate setting %i, max size= %i\n", i,
+ dev->ts1_mode.alt_max_pkt_size[i]);
}
}
wake_up_interruptible_all(&dev->open);
if (dev->users) {
- pr_warn("device %s is open! Deregistration and memory deallocation are deferred on close.\n",
- video_device_node_name(dev->vdev));
+ dev_warn(&dev->udev->dev,
+ "device %s is open! Deregistration and memory deallocation are deferred on close.\n",
+ video_device_node_name(dev->vdev));
/* Even having users, it is safe to remove the RC i2c driver */
cx231xx_ir_exit(dev);
#include <linux/list.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/usb.h>
#include <linux/vmalloc.h>
#include <media/v4l2-common.h>
#include <media/tuner.h>
/* call common vendor command request */
status = cx231xx_send_vendor_cmd(dev, &ven_req);
if (status < 0 && !dev->i2c_scan_running) {
- pr_err("%s: failed with status -%d\n",
+ dev_err(&dev->udev->dev, "%s: failed with status -%d\n",
__func__, status);
}
usb_set_interface(dev->udev, usb_interface_index,
dev->video_mode.alt);
if (errCode < 0) {
- pr_err("cannot change alt number to %d (error=%i)\n",
+ dev_err(&dev->udev->dev,
+ "cannot change alt number to %d (error=%i)\n",
dev->video_mode.alt, errCode);
return errCode;
}
}
if (alt > 0 && max_pkt_size == 0) {
- pr_err("can't change interface %d alt no. to %d: Max. Pkt size = 0\n",
+ dev_err(&dev->udev->dev,
+ "can't change interface %d alt no. to %d: Max. Pkt size = 0\n",
usb_interface_index, alt);
/*To workaround error number=-71 on EP0 for videograbber,
need add following codes.*/
if (usb_interface_index > 0) {
status = usb_set_interface(dev->udev, usb_interface_index, alt);
if (status < 0) {
- pr_err("can't change interface %d alt no. to %d (err=%i)\n",
+ dev_err(&dev->udev->dev,
+ "can't change interface %d alt no. to %d (err=%i)\n",
usb_interface_index, alt, status);
return status;
}
buffer, 4096, &actlen, 2000);
if (ret)
- pr_err("bulk message failed: %d (%d/%d)", ret,
- size, actlen);
+ dev_err(&dev->udev->dev,
+ "bulk message failed: %d (%d/%d)", ret,
+ size, actlen);
else {
errCode = actlen != size ? -1 : 0;
}
dev->video_mode.isoc_ctl.urb =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.isoc_ctl.urb) {
- pr_err("cannot alloc memory for usb buffers\n");
+ dev_err(&dev->udev->dev,
+ "cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->video_mode.isoc_ctl.transfer_buffer =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.isoc_ctl.transfer_buffer) {
- pr_err("cannot allocate memory for usbtransfer\n");
+ dev_err(&dev->udev->dev,
+ "cannot allocate memory for usbtransfer\n");
kfree(dev->video_mode.isoc_ctl.urb);
return -ENOMEM;
}
for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) {
urb = usb_alloc_urb(max_packets, GFP_KERNEL);
if (!urb) {
- pr_err("cannot alloc isoc_ctl.urb %i\n", i);
+ dev_err(&dev->udev->dev,
+ "cannot alloc isoc_ctl.urb %i\n", i);
cx231xx_uninit_isoc(dev);
return -ENOMEM;
}
usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL,
&urb->transfer_dma);
if (!dev->video_mode.isoc_ctl.transfer_buffer[i]) {
- pr_err("unable to allocate %i bytes for transfer buffer %i%s\n",
+ dev_err(&dev->udev->dev,
+ "unable to allocate %i bytes for transfer buffer %i%s\n",
sb_size, i,
in_interrupt() ? " while in int" : "");
cx231xx_uninit_isoc(dev);
rc = usb_submit_urb(dev->video_mode.isoc_ctl.urb[i],
GFP_ATOMIC);
if (rc) {
- pr_err("submit of urb %i failed (error=%i)\n", i,
+ dev_err(&dev->udev->dev,
+ "submit of urb %i failed (error=%i)\n", i,
rc);
cx231xx_uninit_isoc(dev);
return rc;
dev->video_mode.bulk_ctl.urb =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.bulk_ctl.urb) {
- pr_err("cannot alloc memory for usb buffers\n");
+ dev_err(&dev->udev->dev,
+ "cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->video_mode.bulk_ctl.transfer_buffer =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.bulk_ctl.transfer_buffer) {
- pr_err("cannot allocate memory for usbtransfer\n");
+ dev_err(&dev->udev->dev,
+ "cannot allocate memory for usbtransfer\n");
kfree(dev->video_mode.bulk_ctl.urb);
return -ENOMEM;
}
for (i = 0; i < dev->video_mode.bulk_ctl.num_bufs; i++) {
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- pr_err("cannot alloc bulk_ctl.urb %i\n", i);
+ dev_err(&dev->udev->dev,
+ "cannot alloc bulk_ctl.urb %i\n", i);
cx231xx_uninit_bulk(dev);
return -ENOMEM;
}
usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL,
&urb->transfer_dma);
if (!dev->video_mode.bulk_ctl.transfer_buffer[i]) {
- pr_err("unable to allocate %i bytes for transfer buffer %i%s\n",
+ dev_err(&dev->udev->dev,
+ "unable to allocate %i bytes for transfer buffer %i%s\n",
sb_size, i,
in_interrupt() ? " while in int" : "");
cx231xx_uninit_bulk(dev);
rc = usb_submit_urb(dev->video_mode.bulk_ctl.urb[i],
GFP_ATOMIC);
if (rc) {
- pr_err("submit of urb %i failed (error=%i)\n", i,rc);
+ dev_err(&dev->udev->dev,
+ "submit of urb %i failed (error=%i)\n", i, rc);
cx231xx_uninit_bulk(dev);
return rc;
}
errCode = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ENXTERNAL_AV);
if (errCode < 0) {
- pr_err("%s: Failed to set Power - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: Failed to set Power - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
errCode = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ANALOGT_TV);
if (errCode < 0) {
- pr_err("%s: Failed to set Power - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: Failed to set Power - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
/* initialize Colibri block */
errCode = cx231xx_afe_init_super_block(dev, 0x23c);
if (errCode < 0) {
- pr_err("%s: cx231xx_afe init super block - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_afe init super block - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
errCode = cx231xx_afe_init_channels(dev);
if (errCode < 0) {
- pr_err("%s: cx231xx_afe init channels - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_afe init channels - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
/* Set DIF in By pass mode */
errCode = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (errCode < 0) {
- pr_err("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
/* I2S block related functions */
errCode = cx231xx_i2s_blk_initialize(dev);
if (errCode < 0) {
- pr_err("%s: cx231xx_i2s block initialize - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_i2s block initialize - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
/* init control pins */
errCode = cx231xx_init_ctrl_pin_status(dev);
if (errCode < 0) {
- pr_err("%s: cx231xx_init ctrl pins - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_init ctrl pins - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
break;
}
if (errCode < 0) {
- pr_err("%s: cx231xx_AGC mode to Analog - errCode [%d]!\n",
+ dev_err(&dev->udev->dev,
+ "%s: cx231xx_AGC mode to Analog - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
/* call common vendor command request */
status = cx231xx_send_vendor_cmd(dev, &ven_req);
if (status < 0) {
- pr_err("%s: failed with status -%d\n",
+ dev_err(&dev->udev->dev, "%s: failed with status -%d\n",
__func__, status);
}
#include "cx231xx.h"
#include <linux/kernel.h>
#include <linux/slab.h>
-#include <linux/usb.h>
#include <media/v4l2-common.h>
#include <media/videobuf-vmalloc.h>
struct cx231xx *dev = dvb->adapter.priv;
if (dev->USE_ISO) {
- pr_debug("DVB transfer mode is ISO.\n");
+ dev_dbg(&dev->udev->dev, "DVB transfer mode is ISO.\n");
cx231xx_set_alt_setting(dev, INDEX_TS1, 4);
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
if (rc < 0)
dev->ts1_mode.max_pkt_size,
dvb_isoc_copy);
} else {
- pr_debug("DVB transfer mode is BULK.\n");
+ dev_dbg(&dev->udev->dev, "DVB transfer mode is BULK.\n");
cx231xx_set_alt_setting(dev, INDEX_TS1, 0);
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
if (rc < 0)
if (dops->init != NULL && !dev->xc_fw_load_done) {
- pr_debug("Reloading firmware for XC5000\n");
+ dev_dbg(&dev->udev->dev,
+ "Reloading firmware for XC5000\n");
status = dops->init(dev->dvb->frontend);
if (status == 0) {
dev->xc_fw_load_done = 1;
- pr_debug("XC5000 firmware download completed\n");
+ dev_dbg(&dev->udev->dev,
+ "XC5000 firmware download completed\n");
} else {
dev->xc_fw_load_done = 0;
- pr_debug("XC5000 firmware download failed !!!\n");
+ dev_dbg(&dev->udev->dev,
+ "XC5000 firmware download failed !!!\n");
}
}
#include "cx231xx.h"
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
#include <media/v4l2-common.h>
memset(&client, 0, sizeof(client));
client.adapter = cx231xx_get_i2c_adap(dev, i2c_port);
- pr_info("i2c_scan: checking for I2C devices on port=%d ..\n",
+ dev_info(&dev->udev->dev,
+ "i2c_scan: checking for I2C devices on port=%d ..\n",
i2c_port);
for (i = 0; i < 128; i++) {
client.addr = i;
rc = i2c_master_recv(&client, &buf, 0);
if (rc < 0)
continue;
- pr_info("i2c scan: found device @ 0x%x [%s]\n",
- i << 1,
- i2c_devs[i] ? i2c_devs[i] : "???");
+ dev_info(&dev->udev->dev,
+ "i2c scan: found device @ 0x%x [%s]\n",
+ i << 1,
+ i2c_devs[i] ? i2c_devs[i] : "???");
}
- pr_info("i2c scan: Completed Checking for I2C devices on port=%d.\n",
+ dev_info(&dev->udev->dev, "i2c scan: Completed Checking for I2C devices on port=%d.\n",
i2c_port);
dev->i2c_scan_running = false;
i2c_add_adapter(&bus->i2c_adap);
if (0 != bus->i2c_rc)
- pr_warn("i2c bus %d register FAILED\n", bus->nr);
+ dev_warn(&dev->udev->dev,
+ "i2c bus %d register FAILED\n", bus->nr);
return bus->i2c_rc;
}
NULL);
if (!dev->i2c_mux_adap[mux_no])
- pr_warn("i2c mux %d register FAILED\n", mux_no);
+ dev_warn(&dev->udev->dev,
+ "i2c mux %d register FAILED\n", mux_no);
return 0;
}
*/
#include "cx231xx.h"
-#include <linux/usb.h>
#include <linux/slab.h>
#include <linux/bitrev.h>
_current_scenario_idx = INDEX_BUSPOWER_DIF_ONLY;
break;
default:
- pr_err("bad config in buspower!!!!\n");
- pr_err("config_info=%x\n",
+ dev_err(&dev->udev->dev,
+ "bad config in buspower!!!!\nconfig_info=%x\n",
config_info & BUSPOWER_MASK);
return 1;
}
_current_scenario_idx = INDEX_SELFPOWER_COMPRESSOR;
break;
default:
- pr_err("bad senario!!!!!\n");
- pr_err("config_info=%x\n",
+ dev_err(&dev->udev->dev,
+ "bad senario!!!!!\nconfig_info=%x\n",
config_info & SELFPOWER_MASK);
return -ENODEV;
}
sizeof(struct pcb_config));
if (pcb_debug) {
- pr_info("SC(0x00) register = 0x%x\n", config_info);
- pr_info("scenario %d\n",
- (dev->current_pcb_config.index) + 1);
- pr_info("type=%x\n", dev->current_pcb_config.type);
- pr_info("mode=%x\n", dev->current_pcb_config.mode);
- pr_info("speed=%x\n", dev->current_pcb_config.speed);
- pr_info("ts1_source=%x\n",
- dev->current_pcb_config.ts1_source);
- pr_info("ts2_source=%x\n",
- dev->current_pcb_config.ts2_source);
- pr_info("analog_source=%x\n",
- dev->current_pcb_config.analog_source);
+ dev_info(&dev->udev->dev,
+ "SC(0x00) register = 0x%x\n", config_info);
+ dev_info(&dev->udev->dev,
+ "scenario %d\n",
+ (dev->current_pcb_config.index) + 1);
+ dev_info(&dev->udev->dev,
+ "type=%x\n",
+ dev->current_pcb_config.type);
+ dev_info(&dev->udev->dev,
+ "mode=%x\n",
+ dev->current_pcb_config.mode);
+ dev_info(&dev->udev->dev,
+ "speed=%x\n",
+ dev->current_pcb_config.speed);
+ dev_info(&dev->udev->dev,
+ "ts1_source=%x\n",
+ dev->current_pcb_config.ts1_source);
+ dev_info(&dev->udev->dev,
+ "ts2_source=%x\n",
+ dev->current_pcb_config.ts2_source);
+ dev_info(&dev->udev->dev,
+ "analog_source=%x\n",
+ dev->current_pcb_config.analog_source);
}
return 0;
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/bitmap.h>
-#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/mm.h>
#include <linux/mutex.h>
break;
}
if (packet < 0) {
- pr_err("URB status %d [%s].\n", status, errmsg);
+ dev_err(&dev->udev->dev,
+ "URB status %d [%s].\n", status, errmsg);
} else {
- pr_err("URB packet %d, status %d [%s].\n",
+ dev_err(&dev->udev->dev,
+ "URB packet %d, status %d [%s].\n",
packet, status, errmsg);
}
}
case -ESHUTDOWN:
return;
default: /* error */
- pr_err("urb completition error %d.\n",
- urb->status);
+ dev_err(&dev->udev->dev,
+ "urb completition error %d.\n", urb->status);
break;
}
urb->status = usb_submit_urb(urb, GFP_ATOMIC);
if (urb->status) {
- pr_err("urb resubmit failed (error=%i)\n",
+ dev_err(&dev->udev->dev, "urb resubmit failed (error=%i)\n",
urb->status);
}
}
struct urb *urb;
int i;
- pr_debug("called cx231xx_uninit_vbi_isoc\n");
+ dev_dbg(&dev->udev->dev, "called cx231xx_uninit_vbi_isoc\n");
dev->vbi_mode.bulk_ctl.nfields = -1;
for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) {
struct urb *urb;
int rc;
- pr_debug("called cx231xx_vbi_isoc\n");
+ dev_dbg(&dev->udev->dev, "called cx231xx_vbi_isoc\n");
/* De-allocates all pending stuff */
cx231xx_uninit_vbi_isoc(dev);
dev->vbi_mode.bulk_ctl.urb = kzalloc(sizeof(void *) * num_bufs,
GFP_KERNEL);
if (!dev->vbi_mode.bulk_ctl.urb) {
- pr_err("cannot alloc memory for usb buffers\n");
+ dev_err(&dev->udev->dev,
+ "cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->vbi_mode.bulk_ctl.transfer_buffer =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->vbi_mode.bulk_ctl.transfer_buffer) {
- pr_err("cannot allocate memory for usbtransfer\n");
+ dev_err(&dev->udev->dev,
+ "cannot allocate memory for usbtransfer\n");
kfree(dev->vbi_mode.bulk_ctl.urb);
return -ENOMEM;
}
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- pr_err("cannot alloc bulk_ctl.urb %i\n", i);
+ dev_err(&dev->udev->dev,
+ "cannot alloc bulk_ctl.urb %i\n", i);
cx231xx_uninit_vbi_isoc(dev);
return -ENOMEM;
}
dev->vbi_mode.bulk_ctl.transfer_buffer[i] =
kzalloc(sb_size, GFP_KERNEL);
if (!dev->vbi_mode.bulk_ctl.transfer_buffer[i]) {
- pr_err("unable to allocate %i bytes for transfer buffer %i%s\n",
+ dev_err(&dev->udev->dev,
+ "unable to allocate %i bytes for transfer buffer %i%s\n",
sb_size, i,
in_interrupt() ? " while in int" : "");
cx231xx_uninit_vbi_isoc(dev);
for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) {
rc = usb_submit_urb(dev->vbi_mode.bulk_ctl.urb[i], GFP_ATOMIC);
if (rc) {
- pr_err("submit of urb %i failed (error=%i)\n", i, rc);
+ dev_err(&dev->udev->dev,
+ "submit of urb %i failed (error=%i)\n", i, rc);
cx231xx_uninit_vbi_isoc(dev);
return rc;
}
struct cx231xx_buffer *buf)
{
/* Advice that buffer was filled */
- /* pr_debug("[%p/%d] wakeup\n", buf, buf->vb.i); */
+ /* dev_dbg(&dev->udev->dev, "[%p/%d] wakeup\n", buf, buf->vb.i); */
buf->vb.state = VIDEOBUF_DONE;
buf->vb.field_count++;
char *outp;
if (list_empty(&dma_q->active)) {
- pr_err("No active queue to serve\n");
+ dev_err(&dev->udev->dev, "No active queue to serve\n");
dev->vbi_mode.bulk_ctl.buf = NULL;
*buf = NULL;
return;
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/bitmap.h>
-#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/mm.h>
#include <linux/mutex.h>
if (!dev->video_mode.bulk_ctl.num_bufs)
urb_init = 1;
}
- /*pr_debug("urb_init=%d dev->video_mode.max_pkt_size=%d\n",
- urb_init, dev->video_mode.max_pkt_size);*/
+ dev_dbg(&dev->udev->dev,
+ "urb_init=%d dev->video_mode.max_pkt_size=%d\n",
+ urb_init, dev->video_mode.max_pkt_size);
if (urb_init) {
dev->mode_tv = 0;
if (dev->USE_ISO)
cx231xx_set_audio_input(dev, dev->ctl_ainput);
- pr_debug("video_mux : %d\n", index);
+ dev_dbg(&dev->udev->dev, "video_mux : %d\n", index);
/* do mode control overrides if required */
cx231xx_do_mode_ctrl_overrides(dev);
static int check_dev(struct cx231xx *dev)
{
if (dev->state & DEV_DISCONNECTED) {
- pr_err("v4l2 ioctl: device not present\n");
+ dev_err(&dev->udev->dev, "v4l2 ioctl: device not present\n");
return -ENODEV;
}
return 0;
return -EINVAL;
if (videobuf_queue_is_busy(&fh->vb_vidq)) {
- pr_err("%s: queue busy\n", __func__);
+ dev_err(&dev->udev->dev, "%s: queue busy\n", __func__);
return -EBUSY;
}
if (dev->stream_on && !fh->stream_on) {
- pr_err("%s: device in use by another fh\n", __func__);
+ dev_err(&dev->udev->dev,
+ "%s: device in use by another fh\n", __func__);
return -EBUSY;
}
int rc;
u32 if_frequency = 5400000;
- pr_debug("Enter vidioc_s_frequency()f->frequency=%d;f->type=%d\n",
- f->frequency, f->type);
+ dev_dbg(&dev->udev->dev,
+ "Enter vidioc_s_frequency()f->frequency=%d;f->type=%d\n",
+ f->frequency, f->type);
rc = check_dev(dev);
if (rc < 0)
else if (dev->norm & V4L2_STD_SECAM_LC)
if_frequency = 1250000; /*1.25MHz */
- pr_debug("if_frequency is set to %d\n", if_frequency);
+ dev_dbg(&dev->udev->dev,
+ "if_frequency is set to %d\n", if_frequency);
cx231xx_set_Colibri_For_LowIF(dev, if_frequency, 1, 1);
update_HH_register_after_set_DIF(dev);
}
- pr_debug("Set New FREQUENCY to %d\n", f->frequency);
+ dev_dbg(&dev->udev->dev, "Set New FREQUENCY to %d\n", f->frequency);
return rc;
}
struct cx231xx *dev = fh->dev;
if (dev->vbi_stream_on && !fh->stream_on) {
- pr_err("%s device in use by another fh\n", __func__);
+ dev_err(&dev->udev->dev,
+ "%s device in use by another fh\n", __func__);
return -EBUSY;
}
return vidioc_try_fmt_vbi_cap(file, priv, f);
#if 0
errCode = cx231xx_set_mode(dev, CX231XX_ANALOG_MODE);
if (errCode < 0) {
- pr_err("Device locked on digital mode. Can't open analog\n");
+ dev_err(&dev->udev->dev,
+ "Device locked on digital mode. Can't open analog\n");
return -EBUSY;
}
#endif
fh = kzalloc(sizeof(struct cx231xx_fh), GFP_KERNEL);
- if (!fh) {
- pr_err("cx231xx-video.c: Out of memory?!\n");
+ if (!fh)
return -ENOMEM;
- }
if (mutex_lock_interruptible(&dev->lock)) {
kfree(fh);
return -ERESTARTSYS;
dev->radio_dev = NULL;
}
if (dev->vbi_dev) {
- pr_info("V4L2 device %s deregistered\n",
+ dev_info(&dev->udev->dev, "V4L2 device %s deregistered\n",
video_device_node_name(dev->vbi_dev));
if (video_is_registered(dev->vbi_dev))
video_unregister_device(dev->vbi_dev);
dev->vbi_dev = NULL;
}
if (dev->vdev) {
- pr_info("V4L2 device %s deregistered\n",
+ dev_info(&dev->udev->dev, "V4L2 device %s deregistered\n",
video_device_node_name(dev->vdev));
if (dev->board.has_417)
{
int ret;
- pr_info("v4l2 driver version %s\n", CX231XX_VERSION);
+ dev_info(&dev->udev->dev, "v4l2 driver version %s\n", CX231XX_VERSION);
/* set default norm */
dev->norm = V4L2_STD_PAL;
/* allocate and fill video video_device struct */
dev->vdev = cx231xx_vdev_init(dev, &cx231xx_video_template, "video");
if (!dev->vdev) {
- pr_err("cannot allocate video_device.\n");
+ dev_err(&dev->udev->dev, "cannot allocate video_device.\n");
return -ENODEV;
}
ret = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
video_nr[dev->devno]);
if (ret) {
- pr_err("unable to register video device (error=%i).\n",
+ dev_err(&dev->udev->dev,
+ "unable to register video device (error=%i).\n",
ret);
return ret;
}
- pr_info("Registered video device %s [v4l2]\n",
+ dev_info(&dev->udev->dev, "Registered video device %s [v4l2]\n",
video_device_node_name(dev->vdev));
/* Initialize VBI template */
dev->vbi_dev = cx231xx_vdev_init(dev, &cx231xx_vbi_template, "vbi");
if (!dev->vbi_dev) {
- pr_err("cannot allocate video_device.\n");
+ dev_err(&dev->udev->dev, "cannot allocate video_device.\n");
return -ENODEV;
}
dev->vbi_dev->ctrl_handler = &dev->ctrl_handler;
ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
vbi_nr[dev->devno]);
if (ret < 0) {
- pr_err("unable to register vbi device\n");
+ dev_err(&dev->udev->dev, "unable to register vbi device\n");
return ret;
}
- pr_info("Registered VBI device %s\n",
+ dev_info(&dev->udev->dev, "Registered VBI device %s\n",
video_device_node_name(dev->vbi_dev));
if (cx231xx_boards[dev->model].radio.type == CX231XX_RADIO) {
dev->radio_dev = cx231xx_vdev_init(dev, &cx231xx_radio_template,
"radio");
if (!dev->radio_dev) {
- pr_err("cannot allocate video_device.\n");
+ dev_err(&dev->udev->dev,
+ "cannot allocate video_device.\n");
return -ENODEV;
}
dev->radio_dev->ctrl_handler = &dev->radio_ctrl_handler;
ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
radio_nr[dev->devno]);
if (ret < 0) {
- pr_err("can't register radio device\n");
+ dev_err(&dev->udev->dev,
+ "can't register radio device\n");
return ret;
}
- pr_info("Registered radio device as %s\n",
+ dev_info(&dev->udev->dev, "Registered radio device as %s\n",
video_device_node_name(dev->radio_dev));
}
#ifndef _CX231XX_H
#define _CX231XX_H
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
#include <linux/videodev2.h>
#include <linux/types.h>
#include <linux/ioctl.h>
#include <linux/i2c.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
+#include <linux/usb.h>
#include <media/cx2341x.h>
projects / openwrt / staging / blogic.git / commitdiff