COBJS-$(CONFIG_DNET) += dnet.o
COBJS-$(CONFIG_E1000) += e1000.o
COBJS-$(CONFIG_EEPRO100) += eepro100.o
-COBJS-$(CONFIG_ENC28J60) += enc28j60.o
+COBJS-$(CONFIG_ENC28J60_LPC2292) += enc28j60_lpc2292.o
COBJS-$(CONFIG_EP93XX) += ep93xx_eth.o
COBJS-$(CONFIG_ETHOC) += ethoc.o
COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <net.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spi.h>
-
-/*
- * Control Registers in Bank 0
- */
-
-#define CTL_REG_ERDPTL 0x00
-#define CTL_REG_ERDPTH 0x01
-#define CTL_REG_EWRPTL 0x02
-#define CTL_REG_EWRPTH 0x03
-#define CTL_REG_ETXSTL 0x04
-#define CTL_REG_ETXSTH 0x05
-#define CTL_REG_ETXNDL 0x06
-#define CTL_REG_ETXNDH 0x07
-#define CTL_REG_ERXSTL 0x08
-#define CTL_REG_ERXSTH 0x09
-#define CTL_REG_ERXNDL 0x0A
-#define CTL_REG_ERXNDH 0x0B
-#define CTL_REG_ERXRDPTL 0x0C
-#define CTL_REG_ERXRDPTH 0x0D
-#define CTL_REG_ERXWRPTL 0x0E
-#define CTL_REG_ERXWRPTH 0x0F
-#define CTL_REG_EDMASTL 0x10
-#define CTL_REG_EDMASTH 0x11
-#define CTL_REG_EDMANDL 0x12
-#define CTL_REG_EDMANDH 0x13
-#define CTL_REG_EDMADSTL 0x14
-#define CTL_REG_EDMADSTH 0x15
-#define CTL_REG_EDMACSL 0x16
-#define CTL_REG_EDMACSH 0x17
-/* these are common in all banks */
-#define CTL_REG_EIE 0x1B
-#define CTL_REG_EIR 0x1C
-#define CTL_REG_ESTAT 0x1D
-#define CTL_REG_ECON2 0x1E
-#define CTL_REG_ECON1 0x1F
-
-/*
- * Control Registers in Bank 1
- */
-
-#define CTL_REG_EHT0 0x00
-#define CTL_REG_EHT1 0x01
-#define CTL_REG_EHT2 0x02
-#define CTL_REG_EHT3 0x03
-#define CTL_REG_EHT4 0x04
-#define CTL_REG_EHT5 0x05
-#define CTL_REG_EHT6 0x06
-#define CTL_REG_EHT7 0x07
-#define CTL_REG_EPMM0 0x08
-#define CTL_REG_EPMM1 0x09
-#define CTL_REG_EPMM2 0x0A
-#define CTL_REG_EPMM3 0x0B
-#define CTL_REG_EPMM4 0x0C
-#define CTL_REG_EPMM5 0x0D
-#define CTL_REG_EPMM6 0x0E
-#define CTL_REG_EPMM7 0x0F
-#define CTL_REG_EPMCSL 0x10
-#define CTL_REG_EPMCSH 0x11
-#define CTL_REG_EPMOL 0x14
-#define CTL_REG_EPMOH 0x15
-#define CTL_REG_EWOLIE 0x16
-#define CTL_REG_EWOLIR 0x17
-#define CTL_REG_ERXFCON 0x18
-#define CTL_REG_EPKTCNT 0x19
-
-/*
- * Control Registers in Bank 2
- */
-
-#define CTL_REG_MACON1 0x00
-#define CTL_REG_MACON2 0x01
-#define CTL_REG_MACON3 0x02
-#define CTL_REG_MACON4 0x03
-#define CTL_REG_MABBIPG 0x04
-#define CTL_REG_MAIPGL 0x06
-#define CTL_REG_MAIPGH 0x07
-#define CTL_REG_MACLCON1 0x08
-#define CTL_REG_MACLCON2 0x09
-#define CTL_REG_MAMXFLL 0x0A
-#define CTL_REG_MAMXFLH 0x0B
-#define CTL_REG_MAPHSUP 0x0D
-#define CTL_REG_MICON 0x11
-#define CTL_REG_MICMD 0x12
-#define CTL_REG_MIREGADR 0x14
-#define CTL_REG_MIWRL 0x16
-#define CTL_REG_MIWRH 0x17
-#define CTL_REG_MIRDL 0x18
-#define CTL_REG_MIRDH 0x19
-
-/*
- * Control Registers in Bank 3
- */
-
-#define CTL_REG_MAADR1 0x00
-#define CTL_REG_MAADR0 0x01
-#define CTL_REG_MAADR3 0x02
-#define CTL_REG_MAADR2 0x03
-#define CTL_REG_MAADR5 0x04
-#define CTL_REG_MAADR4 0x05
-#define CTL_REG_EBSTSD 0x06
-#define CTL_REG_EBSTCON 0x07
-#define CTL_REG_EBSTCSL 0x08
-#define CTL_REG_EBSTCSH 0x09
-#define CTL_REG_MISTAT 0x0A
-#define CTL_REG_EREVID 0x12
-#define CTL_REG_ECOCON 0x15
-#define CTL_REG_EFLOCON 0x17
-#define CTL_REG_EPAUSL 0x18
-#define CTL_REG_EPAUSH 0x19
-
-
-/*
- * PHY Register
- */
-
-#define PHY_REG_PHID1 0x02
-#define PHY_REG_PHID2 0x03
-/* taken from the Linux driver */
-#define PHY_REG_PHCON1 0x00
-#define PHY_REG_PHCON2 0x10
-#define PHY_REG_PHLCON 0x14
-
-/*
- * Receive Filter Register (ERXFCON) bits
- */
-
-#define ENC_RFR_UCEN 0x80
-#define ENC_RFR_ANDOR 0x40
-#define ENC_RFR_CRCEN 0x20
-#define ENC_RFR_PMEN 0x10
-#define ENC_RFR_MPEN 0x08
-#define ENC_RFR_HTEN 0x04
-#define ENC_RFR_MCEN 0x02
-#define ENC_RFR_BCEN 0x01
-
-/*
- * ECON1 Register Bits
- */
-
-#define ENC_ECON1_TXRST 0x80
-#define ENC_ECON1_RXRST 0x40
-#define ENC_ECON1_DMAST 0x20
-#define ENC_ECON1_CSUMEN 0x10
-#define ENC_ECON1_TXRTS 0x08
-#define ENC_ECON1_RXEN 0x04
-#define ENC_ECON1_BSEL1 0x02
-#define ENC_ECON1_BSEL0 0x01
-
-/*
- * ECON2 Register Bits
- */
-#define ENC_ECON2_AUTOINC 0x80
-#define ENC_ECON2_PKTDEC 0x40
-#define ENC_ECON2_PWRSV 0x20
-#define ENC_ECON2_VRPS 0x08
-
-/*
- * EIR Register Bits
- */
-#define ENC_EIR_PKTIF 0x40
-#define ENC_EIR_DMAIF 0x20
-#define ENC_EIR_LINKIF 0x10
-#define ENC_EIR_TXIF 0x08
-#define ENC_EIR_WOLIF 0x04
-#define ENC_EIR_TXERIF 0x02
-#define ENC_EIR_RXERIF 0x01
-
-/*
- * ESTAT Register Bits
- */
-
-#define ENC_ESTAT_INT 0x80
-#define ENC_ESTAT_LATECOL 0x10
-#define ENC_ESTAT_RXBUSY 0x04
-#define ENC_ESTAT_TXABRT 0x02
-#define ENC_ESTAT_CLKRDY 0x01
-
-/*
- * EIE Register Bits
- */
-
-#define ENC_EIE_INTIE 0x80
-#define ENC_EIE_PKTIE 0x40
-#define ENC_EIE_DMAIE 0x20
-#define ENC_EIE_LINKIE 0x10
-#define ENC_EIE_TXIE 0x08
-#define ENC_EIE_WOLIE 0x04
-#define ENC_EIE_TXERIE 0x02
-#define ENC_EIE_RXERIE 0x01
-
-/*
- * MACON1 Register Bits
- */
-#define ENC_MACON1_LOOPBK 0x10
-#define ENC_MACON1_TXPAUS 0x08
-#define ENC_MACON1_RXPAUS 0x04
-#define ENC_MACON1_PASSALL 0x02
-#define ENC_MACON1_MARXEN 0x01
-
-
-/*
- * MACON2 Register Bits
- */
-#define ENC_MACON2_MARST 0x80
-#define ENC_MACON2_RNDRST 0x40
-#define ENC_MACON2_MARXRST 0x08
-#define ENC_MACON2_RFUNRST 0x04
-#define ENC_MACON2_MATXRST 0x02
-#define ENC_MACON2_TFUNRST 0x01
-
-/*
- * MACON3 Register Bits
- */
-#define ENC_MACON3_PADCFG2 0x80
-#define ENC_MACON3_PADCFG1 0x40
-#define ENC_MACON3_PADCFG0 0x20
-#define ENC_MACON3_TXCRCEN 0x10
-#define ENC_MACON3_PHDRLEN 0x08
-#define ENC_MACON3_HFRMEN 0x04
-#define ENC_MACON3_FRMLNEN 0x02
-#define ENC_MACON3_FULDPX 0x01
-
-/*
- * MICMD Register Bits
- */
-#define ENC_MICMD_MIISCAN 0x02
-#define ENC_MICMD_MIIRD 0x01
-
-/*
- * MISTAT Register Bits
- */
-#define ENC_MISTAT_NVALID 0x04
-#define ENC_MISTAT_SCAN 0x02
-#define ENC_MISTAT_BUSY 0x01
-
-/*
- * PHID1 and PHID2 values
- */
-#define ENC_PHID1_VALUE 0x0083
-#define ENC_PHID2_VALUE 0x1400
-#define ENC_PHID2_MASK 0xFC00
-
-
-#define ENC_SPI_SLAVE_CS 0x00010000 /* pin P1.16 */
-#define ENC_RESET 0x00020000 /* pin P1.17 */
-
-#define FAILSAFE_VALUE 5000
-
-/*
- * Controller memory layout:
- *
- * 0x0000 - 0x17ff 6k bytes receive buffer
- * 0x1800 - 0x1fff 2k bytes transmit buffer
- */
-/* Use the lower memory for receiver buffer. See errata pt. 5 */
-#define ENC_RX_BUF_START 0x0000
-#define ENC_TX_BUF_START 0x1800
-/* taken from the Linux driver */
-#define ENC_RX_BUF_END 0x17ff
-#define ENC_TX_BUF_END 0x1fff
-
-/* maximum frame length */
-#define ENC_MAX_FRM_LEN 1518
-
-#define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS)
-#define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS)
-#define enc_cfg_spi() spi_set_cfg(0, 0, 0); spi_set_clock(8);
-
-
-static unsigned char encReadReg (unsigned char regNo);
-static void encWriteReg (unsigned char regNo, unsigned char data);
-static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c);
-static void encReadBuff (unsigned short length, unsigned char *pBuff);
-static void encWriteBuff (unsigned short length, unsigned char *pBuff);
-static void encBitSet (unsigned char regNo, unsigned char data);
-static void encBitClr (unsigned char regNo, unsigned char data);
-static void encReset (void);
-static void encInit (unsigned char *pEthAddr);
-static unsigned short phyRead (unsigned char addr);
-static void phyWrite(unsigned char, unsigned short);
-static void encPoll (void);
-static void encRx (void);
-
-#define m_nic_read(reg) encReadReg(reg)
-#define m_nic_write(reg, data) encWriteReg(reg, data)
-#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count)
-#define m_nic_read_data(len, buf) encReadBuff((len), (buf))
-#define m_nic_write_data(len, buf) encWriteBuff((len), (buf))
-
-/* bit field set */
-#define m_nic_bfs(reg, data) encBitSet(reg, data)
-
-/* bit field clear */
-#define m_nic_bfc(reg, data) encBitClr(reg, data)
-
-static unsigned char bank = 0; /* current bank in enc28j60 */
-static unsigned char next_pointer_lsb;
-static unsigned char next_pointer_msb;
-
-static unsigned char buffer[ENC_MAX_FRM_LEN];
-static int rxResetCounter = 0;
-
-#define RX_RESET_COUNTER 1000;
-
-/*-----------------------------------------------------------------------------
- * Always returns 0
- */
-int eth_init (bd_t * bis)
-{
- unsigned char estatVal;
- uchar enetaddr[6];
-
- /* configure GPIO */
- (*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS;
- (*((volatile unsigned long *) IO1DIR)) |= ENC_RESET;
-
- /* CS and RESET active low */
- PUT32 (IO1SET, ENC_SPI_SLAVE_CS);
- PUT32 (IO1SET, ENC_RESET);
-
- spi_init ();
-
- /* taken from the Linux driver - dangerous stuff here! */
- /* Wait for CLKRDY to become set (i.e., check that we can communicate with
- the ENC) */
- do
- {
- estatVal = m_nic_read(CTL_REG_ESTAT);
- } while ((estatVal & 0x08) || (~estatVal & ENC_ESTAT_CLKRDY));
-
- /* initialize controller */
- encReset ();
- eth_getenv_enetaddr("ethaddr", enetaddr);
- encInit (enetaddr);
-
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
-
- return 0;
-}
-
-int eth_send (volatile void *packet, int length)
-{
- /* check frame length, etc. */
- /* TODO: */
-
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
-
- /* set EWRPT */
- m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff));
- m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8));
-
- /* set ETXND */
- m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF);
- m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8);
-
- /* set ETXST */
- m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF);
- m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8);
-
- /* write packet */
- m_nic_write_data (length, (unsigned char *) packet);
-
- /* taken from the Linux driver */
- /* Verify that the internal transmit logic has not been altered by excessive
- collisions. See Errata B4 12 and 14.
- */
- if (m_nic_read(CTL_REG_EIR) & ENC_EIR_TXERIF) {
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRST);
- m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_TXRST);
- }
- m_nic_bfc(CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));
-
- /* set ECON1.TXRTS */
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS);
-
- return 0;
-}
-
-
-/*****************************************************************************
- * This function resets the receiver only. This function may be called from
- * interrupt-context.
- */
-static void encReceiverReset (void)
-{
- unsigned char econ1;
-
- econ1 = m_nic_read (CTL_REG_ECON1);
- if ((econ1 & ENC_ECON1_RXRST) == 0) {
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXRST);
- rxResetCounter = RX_RESET_COUNTER;
- }
-}
-
-/*****************************************************************************
- * receiver reset timer
- */
-static void encReceiverResetCallback (void)
-{
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXRST);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
-}
-
-/*-----------------------------------------------------------------------------
- * Check for received packets. Call NetReceive for each packet. The return
- * value is ignored by the caller.
- */
-int eth_rx (void)
-{
- if (rxResetCounter > 0 && --rxResetCounter == 0) {
- encReceiverResetCallback ();
- }
-
- encPoll ();
-
- return 0;
-}
-
-void eth_halt (void)
-{
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXEN); /* disable receive */
-}
-
-/*****************************************************************************/
-
-static void encPoll (void)
-{
- unsigned char eir_reg;
- volatile unsigned char estat_reg;
- unsigned char pkt_cnt;
-
-#ifdef CONFIG_USE_IRQ
- /* clear global interrupt enable bit in enc28j60 */
- m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE);
-#endif
- estat_reg = m_nic_read (CTL_REG_ESTAT);
-
- eir_reg = m_nic_read (CTL_REG_EIR);
-
- if (eir_reg & ENC_EIR_TXIF) {
- /* clear TXIF bit in EIR */
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXIF);
- }
-
- /* We have to use pktcnt and not pktif bit, see errata pt. 6 */
-
- /* move to bank 1 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
-
- /* read pktcnt */
- pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
-
- if (pkt_cnt > 0) {
- if ((eir_reg & ENC_EIR_PKTIF) == 0) {
- /*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */
- }
- encRx ();
- /* clear PKTIF bit in EIR, this should not need to be done but it
- seems like we get problems if we do not */
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_PKTIF);
- }
-
- if (eir_reg & ENC_EIR_RXERIF) {
- printf ("encPoll: rx error\n");
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_RXERIF);
- }
- if (eir_reg & ENC_EIR_TXERIF) {
- printf ("encPoll: tx error\n");
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF);
- }
-
-#ifdef CONFIG_USE_IRQ
- /* set global interrupt enable bit in enc28j60 */
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
-#endif
-}
-
-static void encRx (void)
-{
- unsigned short pkt_len;
- unsigned short copy_len;
- unsigned short status;
- unsigned char eir_reg;
- unsigned char pkt_cnt = 0;
- unsigned short rxbuf_rdpt;
-
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
-
- m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
- m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
-
- do {
- m_nic_read_data (6, buffer);
- next_pointer_lsb = buffer[0];
- next_pointer_msb = buffer[1];
- pkt_len = buffer[2];
- pkt_len |= (unsigned short) buffer[3] << 8;
- status = buffer[4];
- status |= (unsigned short) buffer[5] << 8;
-
- if (pkt_len <= ENC_MAX_FRM_LEN)
- copy_len = pkt_len;
- else
- copy_len = 0;
-
- if ((status & (1L << 7)) == 0) /* check Received Ok bit */
- copy_len = 0;
-
- /* taken from the Linux driver */
- /* check if next pointer is resonable */
- if ((((unsigned int)next_pointer_msb << 8) |
- (unsigned int)next_pointer_lsb) >= ENC_TX_BUF_START)
- copy_len = 0;
-
- if (copy_len > 0) {
- m_nic_read_data (copy_len, buffer);
- }
-
- /* advance read pointer to next pointer */
- m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
- m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
-
- /* decrease packet counter */
- m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
-
- /* taken from the Linux driver */
- /* Only odd values should be written to ERXRDPTL,
- * see errata B4 pt.13
- */
- rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
- if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 |
- m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt >
- (m_nic_read(CTL_REG_ERXNDH) << 8 |
- m_nic_read(CTL_REG_ERXNDL)))) {
- m_nic_write(CTL_REG_ERXRDPTL, m_nic_read(CTL_REG_ERXNDL));
- m_nic_write(CTL_REG_ERXRDPTH, m_nic_read(CTL_REG_ERXNDH));
- } else {
- m_nic_write(CTL_REG_ERXRDPTL, rxbuf_rdpt & 0xFF);
- m_nic_write(CTL_REG_ERXRDPTH, rxbuf_rdpt >> 8);
- }
-
- /* move to bank 1 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
-
- /* read pktcnt */
- pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
-
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1,
- (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
-
- if (copy_len == 0) {
- eir_reg = m_nic_read (CTL_REG_EIR);
- encReceiverReset ();
- printf ("eth_rx: copy_len=0\n");
- continue;
- }
-
- NetReceive ((unsigned char *) buffer, pkt_len);
-
- eir_reg = m_nic_read (CTL_REG_EIR);
- } while (pkt_cnt); /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
-}
-
-static void encWriteReg (unsigned char regNo, unsigned char data)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x40 | regNo); /* write in regNo */
- spi_write (data);
-
- enc_disable ();
- enc_enable ();
-
- spi_write (0x1f); /* write reg 0x1f */
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c)
-{
- unsigned char readback;
- int i;
-
- spi_lock ();
-
- for (i = 0; i < c; i++) {
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x40 | regNo); /* write in regNo */
- spi_write (data);
-
- enc_disable ();
- enc_enable ();
-
- spi_write (0x1f); /* write reg 0x1f */
-
- enc_disable ();
-
- spi_unlock (); /* we must unlock spi first */
-
- readback = encReadReg (regNo);
-
- spi_lock ();
-
- if (readback == data)
- break;
- }
- spi_unlock ();
-
- if (i == c) {
- printf ("enc28j60: write reg %d failed\n", regNo);
- }
-}
-
-static unsigned char encReadReg (unsigned char regNo)
-{
- unsigned char rxByte;
-
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x1f); /* read reg 0x1f */
-
- bank = spi_read () & 0x3;
-
- enc_disable ();
- enc_enable ();
-
- spi_write (regNo);
- rxByte = spi_read ();
-
- /* check if MAC or MII register */
- if (((bank == 2) && (regNo <= 0x1a)) ||
- ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) {
- /* ignore first byte and read another byte */
- rxByte = spi_read ();
- }
-
- enc_disable ();
- spi_unlock ();
-
- return rxByte;
-}
-
-static void encReadBuff (unsigned short length, unsigned char *pBuff)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x20 | 0x1a); /* read buffer memory */
-
- while (length--) {
- if (pBuff != NULL)
- *pBuff++ = spi_read ();
- else
- spi_write (0);
- }
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encWriteBuff (unsigned short length, unsigned char *pBuff)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x60 | 0x1a); /* write buffer memory */
-
- spi_write (0x00); /* control byte */
-
- while (length--)
- spi_write (*pBuff++);
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encBitSet (unsigned char regNo, unsigned char data)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x80 | regNo); /* bit field set */
- spi_write (data);
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encBitClr (unsigned char regNo, unsigned char data)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0xA0 | regNo); /* bit field clear */
- spi_write (data);
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encReset (void)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0xff); /* soft reset */
-
- enc_disable ();
- spi_unlock ();
-
- /* sleep 1 ms. See errata pt. 2 */
- udelay (1000);
-}
-
-static void encInit (unsigned char *pEthAddr)
-{
- unsigned short phid1 = 0;
- unsigned short phid2 = 0;
-
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
-
- /*
- * Setup the buffer space. The reset values are valid for the
- * other pointers.
- */
- /* We shall not write to ERXST, see errata pt. 5. Instead we
- have to make sure that ENC_RX_BUS_START is 0. */
- m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1);
- m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1);
-
- /* taken from the Linux driver */
- m_nic_write_retry (CTL_REG_ERXNDL, (ENC_RX_BUF_END & 0xFF), 1);
- m_nic_write_retry (CTL_REG_ERXNDH, (ENC_RX_BUF_END >> 8), 1);
-
- m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1);
- m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1);
-
- next_pointer_lsb = (ENC_RX_BUF_START & 0xFF);
- next_pointer_msb = (ENC_RX_BUF_START >> 8);
-
- /* verify identification */
- phid1 = phyRead (PHY_REG_PHID1);
- phid2 = phyRead (PHY_REG_PHID2);
-
- if (phid1 != ENC_PHID1_VALUE
- || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) {
- printf ("ERROR: failed to identify controller\n");
- printf ("phid1 = %x, phid2 = %x\n",
- phid1, (phid2 & ENC_PHID2_MASK));
- printf ("should be phid1 = %x, phid2 = %x\n",
- ENC_PHID1_VALUE, ENC_PHID2_VALUE);
- }
-
- /*
- * --- MAC Initialization ---
- */
-
- /* Pull MAC out of Reset */
-
- /* switch to bank 2 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
-
- /* enable MAC to receive frames */
- /* added some bits from the Linux driver */
- m_nic_write_retry (CTL_REG_MACON1
- ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS)
- ,10);
-
- /* configure pad, tx-crc and duplex */
- /* added a bit from the Linux driver */
- m_nic_write_retry (CTL_REG_MACON3
- ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN)
- ,10);
-
- /* added 4 new lines from the Linux driver */
- /* Allow infinite deferals if the medium is continously busy */
- m_nic_write_retry(CTL_REG_MACON4, (1<<6) /*ENC_MACON4_DEFER*/, 10);
-
- /* Late collisions occur beyond 63 bytes */
- m_nic_write_retry(CTL_REG_MACLCON2, 63, 10);
-
- /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */
- m_nic_write_retry(CTL_REG_MAIPGL, 0x12, 10);
-
- /*
- * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended
- * 0x0c for half-duplex. Nothing for full-duplex
- */
- m_nic_write_retry(CTL_REG_MAIPGH, 0x0C, 10);
-
- /* set maximum frame length */
- m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10);
- m_nic_write_retry (CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10);
-
- /*
- * Set MAC back-to-back inter-packet gap. Recommended 0x12 for half duplex
- * and 0x15 for full duplex.
- */
- m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10);
-
- /* set MAC address */
-
- /* switch to bank 3 */
- m_nic_bfs (CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1));
-
- m_nic_write_retry (CTL_REG_MAADR0, pEthAddr[5], 1);
- m_nic_write_retry (CTL_REG_MAADR1, pEthAddr[4], 1);
- m_nic_write_retry (CTL_REG_MAADR2, pEthAddr[3], 1);
- m_nic_write_retry (CTL_REG_MAADR3, pEthAddr[2], 1);
- m_nic_write_retry (CTL_REG_MAADR4, pEthAddr[1], 1);
- m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1);
-
- /*
- * PHY Initialization taken from the Linux driver
- */
-
- /* Prevent automatic loopback of data beeing transmitted by setting
- ENC_PHCON2_HDLDIS */
- phyWrite(PHY_REG_PHCON2, (1<<8));
-
- /* LEDs configuration
- * LEDA: LACFG = 0100 -> display link status
- * LEDB: LBCFG = 0111 -> display TX & RX activity
- * STRCH = 1 -> LED pulses
- */
- phyWrite(PHY_REG_PHLCON, 0x0472);
-
- /* Reset PDPXMD-bit => half duplex */
- phyWrite(PHY_REG_PHCON1, 0);
-
- /*
- * Receive settings
- */
-
-#ifdef CONFIG_USE_IRQ
- /* enable interrupts */
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
-#endif
-}
-
-/*****************************************************************************
- *
- * Description:
- * Read PHY registers.
- *
- * NOTE! This function will change to Bank 2.
- *
- * Params:
- * [in] addr address of the register to read
- *
- * Returns:
- * The value in the register
- */
-static unsigned short phyRead (unsigned char addr)
-{
- unsigned short ret = 0;
-
- /* move to bank 2 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
-
- /* write address to MIREGADR */
- m_nic_write (CTL_REG_MIREGADR, addr);
-
- /* set MICMD.MIIRD */
- m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD);
-
- /* taken from the Linux driver */
- /* move to bank 3 */
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
-
- /* poll MISTAT.BUSY bit until operation is complete */
- while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
- static int cnt = 0;
-
- if (cnt++ >= 1000) {
- /* GJ - this seems extremely dangerous! */
- /* printf("#"); */
- cnt = 0;
- }
- }
-
- /* taken from the Linux driver */
- /* move to bank 2 */
- m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
-
- /* clear MICMD.MIIRD */
- m_nic_write (CTL_REG_MICMD, 0);
-
- ret = (m_nic_read (CTL_REG_MIRDH) << 8);
- ret |= (m_nic_read (CTL_REG_MIRDL) & 0xFF);
-
- return ret;
-}
-
-/*****************************************************************************
- *
- * Taken from the Linux driver.
- * Description:
- * Write PHY registers.
- *
- * NOTE! This function will change to Bank 3.
- *
- * Params:
- * [in] addr address of the register to write to
- * [in] data to be written
- *
- * Returns:
- * None
- */
-static void phyWrite(unsigned char addr, unsigned short data)
-{
- /* move to bank 2 */
- m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
-
- /* write address to MIREGADR */
- m_nic_write(CTL_REG_MIREGADR, addr);
-
- m_nic_write(CTL_REG_MIWRL, data & 0xff);
- m_nic_write(CTL_REG_MIWRH, data >> 8);
-
- /* move to bank 3 */
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
-
- /* poll MISTAT.BUSY bit until operation is complete */
- while((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
- static int cnt = 0;
-
- if(cnt++ >= 1000) {
- cnt = 0;
- }
- }
-}
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#warning This driver is depreciated. Please update to new SPI framework enc28j60 driver
+#include <config.h>
+#include <common.h>
+#include <net.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spi.h>
+
+/*
+ * Control Registers in Bank 0
+ */
+
+#define CTL_REG_ERDPTL 0x00
+#define CTL_REG_ERDPTH 0x01
+#define CTL_REG_EWRPTL 0x02
+#define CTL_REG_EWRPTH 0x03
+#define CTL_REG_ETXSTL 0x04
+#define CTL_REG_ETXSTH 0x05
+#define CTL_REG_ETXNDL 0x06
+#define CTL_REG_ETXNDH 0x07
+#define CTL_REG_ERXSTL 0x08
+#define CTL_REG_ERXSTH 0x09
+#define CTL_REG_ERXNDL 0x0A
+#define CTL_REG_ERXNDH 0x0B
+#define CTL_REG_ERXRDPTL 0x0C
+#define CTL_REG_ERXRDPTH 0x0D
+#define CTL_REG_ERXWRPTL 0x0E
+#define CTL_REG_ERXWRPTH 0x0F
+#define CTL_REG_EDMASTL 0x10
+#define CTL_REG_EDMASTH 0x11
+#define CTL_REG_EDMANDL 0x12
+#define CTL_REG_EDMANDH 0x13
+#define CTL_REG_EDMADSTL 0x14
+#define CTL_REG_EDMADSTH 0x15
+#define CTL_REG_EDMACSL 0x16
+#define CTL_REG_EDMACSH 0x17
+/* these are common in all banks */
+#define CTL_REG_EIE 0x1B
+#define CTL_REG_EIR 0x1C
+#define CTL_REG_ESTAT 0x1D
+#define CTL_REG_ECON2 0x1E
+#define CTL_REG_ECON1 0x1F
+
+/*
+ * Control Registers in Bank 1
+ */
+
+#define CTL_REG_EHT0 0x00
+#define CTL_REG_EHT1 0x01
+#define CTL_REG_EHT2 0x02
+#define CTL_REG_EHT3 0x03
+#define CTL_REG_EHT4 0x04
+#define CTL_REG_EHT5 0x05
+#define CTL_REG_EHT6 0x06
+#define CTL_REG_EHT7 0x07
+#define CTL_REG_EPMM0 0x08
+#define CTL_REG_EPMM1 0x09
+#define CTL_REG_EPMM2 0x0A
+#define CTL_REG_EPMM3 0x0B
+#define CTL_REG_EPMM4 0x0C
+#define CTL_REG_EPMM5 0x0D
+#define CTL_REG_EPMM6 0x0E
+#define CTL_REG_EPMM7 0x0F
+#define CTL_REG_EPMCSL 0x10
+#define CTL_REG_EPMCSH 0x11
+#define CTL_REG_EPMOL 0x14
+#define CTL_REG_EPMOH 0x15
+#define CTL_REG_EWOLIE 0x16
+#define CTL_REG_EWOLIR 0x17
+#define CTL_REG_ERXFCON 0x18
+#define CTL_REG_EPKTCNT 0x19
+
+/*
+ * Control Registers in Bank 2
+ */
+
+#define CTL_REG_MACON1 0x00
+#define CTL_REG_MACON2 0x01
+#define CTL_REG_MACON3 0x02
+#define CTL_REG_MACON4 0x03
+#define CTL_REG_MABBIPG 0x04
+#define CTL_REG_MAIPGL 0x06
+#define CTL_REG_MAIPGH 0x07
+#define CTL_REG_MACLCON1 0x08
+#define CTL_REG_MACLCON2 0x09
+#define CTL_REG_MAMXFLL 0x0A
+#define CTL_REG_MAMXFLH 0x0B
+#define CTL_REG_MAPHSUP 0x0D
+#define CTL_REG_MICON 0x11
+#define CTL_REG_MICMD 0x12
+#define CTL_REG_MIREGADR 0x14
+#define CTL_REG_MIWRL 0x16
+#define CTL_REG_MIWRH 0x17
+#define CTL_REG_MIRDL 0x18
+#define CTL_REG_MIRDH 0x19
+
+/*
+ * Control Registers in Bank 3
+ */
+
+#define CTL_REG_MAADR1 0x00
+#define CTL_REG_MAADR0 0x01
+#define CTL_REG_MAADR3 0x02
+#define CTL_REG_MAADR2 0x03
+#define CTL_REG_MAADR5 0x04
+#define CTL_REG_MAADR4 0x05
+#define CTL_REG_EBSTSD 0x06
+#define CTL_REG_EBSTCON 0x07
+#define CTL_REG_EBSTCSL 0x08
+#define CTL_REG_EBSTCSH 0x09
+#define CTL_REG_MISTAT 0x0A
+#define CTL_REG_EREVID 0x12
+#define CTL_REG_ECOCON 0x15
+#define CTL_REG_EFLOCON 0x17
+#define CTL_REG_EPAUSL 0x18
+#define CTL_REG_EPAUSH 0x19
+
+
+/*
+ * PHY Register
+ */
+
+#define PHY_REG_PHID1 0x02
+#define PHY_REG_PHID2 0x03
+/* taken from the Linux driver */
+#define PHY_REG_PHCON1 0x00
+#define PHY_REG_PHCON2 0x10
+#define PHY_REG_PHLCON 0x14
+
+/*
+ * Receive Filter Register (ERXFCON) bits
+ */
+
+#define ENC_RFR_UCEN 0x80
+#define ENC_RFR_ANDOR 0x40
+#define ENC_RFR_CRCEN 0x20
+#define ENC_RFR_PMEN 0x10
+#define ENC_RFR_MPEN 0x08
+#define ENC_RFR_HTEN 0x04
+#define ENC_RFR_MCEN 0x02
+#define ENC_RFR_BCEN 0x01
+
+/*
+ * ECON1 Register Bits
+ */
+
+#define ENC_ECON1_TXRST 0x80
+#define ENC_ECON1_RXRST 0x40
+#define ENC_ECON1_DMAST 0x20
+#define ENC_ECON1_CSUMEN 0x10
+#define ENC_ECON1_TXRTS 0x08
+#define ENC_ECON1_RXEN 0x04
+#define ENC_ECON1_BSEL1 0x02
+#define ENC_ECON1_BSEL0 0x01
+
+/*
+ * ECON2 Register Bits
+ */
+#define ENC_ECON2_AUTOINC 0x80
+#define ENC_ECON2_PKTDEC 0x40
+#define ENC_ECON2_PWRSV 0x20
+#define ENC_ECON2_VRPS 0x08
+
+/*
+ * EIR Register Bits
+ */
+#define ENC_EIR_PKTIF 0x40
+#define ENC_EIR_DMAIF 0x20
+#define ENC_EIR_LINKIF 0x10
+#define ENC_EIR_TXIF 0x08
+#define ENC_EIR_WOLIF 0x04
+#define ENC_EIR_TXERIF 0x02
+#define ENC_EIR_RXERIF 0x01
+
+/*
+ * ESTAT Register Bits
+ */
+
+#define ENC_ESTAT_INT 0x80
+#define ENC_ESTAT_LATECOL 0x10
+#define ENC_ESTAT_RXBUSY 0x04
+#define ENC_ESTAT_TXABRT 0x02
+#define ENC_ESTAT_CLKRDY 0x01
+
+/*
+ * EIE Register Bits
+ */
+
+#define ENC_EIE_INTIE 0x80
+#define ENC_EIE_PKTIE 0x40
+#define ENC_EIE_DMAIE 0x20
+#define ENC_EIE_LINKIE 0x10
+#define ENC_EIE_TXIE 0x08
+#define ENC_EIE_WOLIE 0x04
+#define ENC_EIE_TXERIE 0x02
+#define ENC_EIE_RXERIE 0x01
+
+/*
+ * MACON1 Register Bits
+ */
+#define ENC_MACON1_LOOPBK 0x10
+#define ENC_MACON1_TXPAUS 0x08
+#define ENC_MACON1_RXPAUS 0x04
+#define ENC_MACON1_PASSALL 0x02
+#define ENC_MACON1_MARXEN 0x01
+
+
+/*
+ * MACON2 Register Bits
+ */
+#define ENC_MACON2_MARST 0x80
+#define ENC_MACON2_RNDRST 0x40
+#define ENC_MACON2_MARXRST 0x08
+#define ENC_MACON2_RFUNRST 0x04
+#define ENC_MACON2_MATXRST 0x02
+#define ENC_MACON2_TFUNRST 0x01
+
+/*
+ * MACON3 Register Bits
+ */
+#define ENC_MACON3_PADCFG2 0x80
+#define ENC_MACON3_PADCFG1 0x40
+#define ENC_MACON3_PADCFG0 0x20
+#define ENC_MACON3_TXCRCEN 0x10
+#define ENC_MACON3_PHDRLEN 0x08
+#define ENC_MACON3_HFRMEN 0x04
+#define ENC_MACON3_FRMLNEN 0x02
+#define ENC_MACON3_FULDPX 0x01
+
+/*
+ * MICMD Register Bits
+ */
+#define ENC_MICMD_MIISCAN 0x02
+#define ENC_MICMD_MIIRD 0x01
+
+/*
+ * MISTAT Register Bits
+ */
+#define ENC_MISTAT_NVALID 0x04
+#define ENC_MISTAT_SCAN 0x02
+#define ENC_MISTAT_BUSY 0x01
+
+/*
+ * PHID1 and PHID2 values
+ */
+#define ENC_PHID1_VALUE 0x0083
+#define ENC_PHID2_VALUE 0x1400
+#define ENC_PHID2_MASK 0xFC00
+
+
+#define ENC_SPI_SLAVE_CS 0x00010000 /* pin P1.16 */
+#define ENC_RESET 0x00020000 /* pin P1.17 */
+
+#define FAILSAFE_VALUE 5000
+
+/*
+ * Controller memory layout:
+ *
+ * 0x0000 - 0x17ff 6k bytes receive buffer
+ * 0x1800 - 0x1fff 2k bytes transmit buffer
+ */
+/* Use the lower memory for receiver buffer. See errata pt. 5 */
+#define ENC_RX_BUF_START 0x0000
+#define ENC_TX_BUF_START 0x1800
+/* taken from the Linux driver */
+#define ENC_RX_BUF_END 0x17ff
+#define ENC_TX_BUF_END 0x1fff
+
+/* maximum frame length */
+#define ENC_MAX_FRM_LEN 1518
+
+#define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS)
+#define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS)
+#define enc_cfg_spi() spi_set_cfg(0, 0, 0); spi_set_clock(8);
+
+
+static unsigned char encReadReg (unsigned char regNo);
+static void encWriteReg (unsigned char regNo, unsigned char data);
+static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c);
+static void encReadBuff (unsigned short length, unsigned char *pBuff);
+static void encWriteBuff (unsigned short length, unsigned char *pBuff);
+static void encBitSet (unsigned char regNo, unsigned char data);
+static void encBitClr (unsigned char regNo, unsigned char data);
+static void encReset (void);
+static void encInit (unsigned char *pEthAddr);
+static unsigned short phyRead (unsigned char addr);
+static void phyWrite(unsigned char, unsigned short);
+static void encPoll (void);
+static void encRx (void);
+
+#define m_nic_read(reg) encReadReg(reg)
+#define m_nic_write(reg, data) encWriteReg(reg, data)
+#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count)
+#define m_nic_read_data(len, buf) encReadBuff((len), (buf))
+#define m_nic_write_data(len, buf) encWriteBuff((len), (buf))
+
+/* bit field set */
+#define m_nic_bfs(reg, data) encBitSet(reg, data)
+
+/* bit field clear */
+#define m_nic_bfc(reg, data) encBitClr(reg, data)
+
+static unsigned char bank = 0; /* current bank in enc28j60 */
+static unsigned char next_pointer_lsb;
+static unsigned char next_pointer_msb;
+
+static unsigned char buffer[ENC_MAX_FRM_LEN];
+static int rxResetCounter = 0;
+
+#define RX_RESET_COUNTER 1000;
+
+/*-----------------------------------------------------------------------------
+ * Always returns 0
+ */
+int eth_init (bd_t * bis)
+{
+ unsigned char estatVal;
+ uchar enetaddr[6];
+
+ /* configure GPIO */
+ (*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS;
+ (*((volatile unsigned long *) IO1DIR)) |= ENC_RESET;
+
+ /* CS and RESET active low */
+ PUT32 (IO1SET, ENC_SPI_SLAVE_CS);
+ PUT32 (IO1SET, ENC_RESET);
+
+ spi_init ();
+
+ /* taken from the Linux driver - dangerous stuff here! */
+ /* Wait for CLKRDY to become set (i.e., check that we can communicate with
+ the ENC) */
+ do
+ {
+ estatVal = m_nic_read(CTL_REG_ESTAT);
+ } while ((estatVal & 0x08) || (~estatVal & ENC_ESTAT_CLKRDY));
+
+ /* initialize controller */
+ encReset ();
+ eth_getenv_enetaddr("ethaddr", enetaddr);
+ encInit (enetaddr);
+
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
+
+ return 0;
+}
+
+int eth_send (volatile void *packet, int length)
+{
+ /* check frame length, etc. */
+ /* TODO: */
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ /* set EWRPT */
+ m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff));
+ m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8));
+
+ /* set ETXND */
+ m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF);
+ m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8);
+
+ /* set ETXST */
+ m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF);
+ m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8);
+
+ /* write packet */
+ m_nic_write_data (length, (unsigned char *) packet);
+
+ /* taken from the Linux driver */
+ /* Verify that the internal transmit logic has not been altered by excessive
+ collisions. See Errata B4 12 and 14.
+ */
+ if (m_nic_read(CTL_REG_EIR) & ENC_EIR_TXERIF) {
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRST);
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_TXRST);
+ }
+ m_nic_bfc(CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));
+
+ /* set ECON1.TXRTS */
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS);
+
+ return 0;
+}
+
+
+/*****************************************************************************
+ * This function resets the receiver only. This function may be called from
+ * interrupt-context.
+ */
+static void encReceiverReset (void)
+{
+ unsigned char econ1;
+
+ econ1 = m_nic_read (CTL_REG_ECON1);
+ if ((econ1 & ENC_ECON1_RXRST) == 0) {
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXRST);
+ rxResetCounter = RX_RESET_COUNTER;
+ }
+}
+
+/*****************************************************************************
+ * receiver reset timer
+ */
+static void encReceiverResetCallback (void)
+{
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXRST);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
+}
+
+/*-----------------------------------------------------------------------------
+ * Check for received packets. Call NetReceive for each packet. The return
+ * value is ignored by the caller.
+ */
+int eth_rx (void)
+{
+ if (rxResetCounter > 0 && --rxResetCounter == 0) {
+ encReceiverResetCallback ();
+ }
+
+ encPoll ();
+
+ return 0;
+}
+
+void eth_halt (void)
+{
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXEN); /* disable receive */
+}
+
+/*****************************************************************************/
+
+static void encPoll (void)
+{
+ unsigned char eir_reg;
+ volatile unsigned char estat_reg;
+ unsigned char pkt_cnt;
+
+#ifdef CONFIG_USE_IRQ
+ /* clear global interrupt enable bit in enc28j60 */
+ m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+ estat_reg = m_nic_read (CTL_REG_ESTAT);
+
+ eir_reg = m_nic_read (CTL_REG_EIR);
+
+ if (eir_reg & ENC_EIR_TXIF) {
+ /* clear TXIF bit in EIR */
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXIF);
+ }
+
+ /* We have to use pktcnt and not pktif bit, see errata pt. 6 */
+
+ /* move to bank 1 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+
+ /* read pktcnt */
+ pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
+
+ if (pkt_cnt > 0) {
+ if ((eir_reg & ENC_EIR_PKTIF) == 0) {
+ /*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */
+ }
+ encRx ();
+ /* clear PKTIF bit in EIR, this should not need to be done but it
+ seems like we get problems if we do not */
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_PKTIF);
+ }
+
+ if (eir_reg & ENC_EIR_RXERIF) {
+ printf ("encPoll: rx error\n");
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_RXERIF);
+ }
+ if (eir_reg & ENC_EIR_TXERIF) {
+ printf ("encPoll: tx error\n");
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF);
+ }
+
+#ifdef CONFIG_USE_IRQ
+ /* set global interrupt enable bit in enc28j60 */
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+}
+
+static void encRx (void)
+{
+ unsigned short pkt_len;
+ unsigned short copy_len;
+ unsigned short status;
+ unsigned char eir_reg;
+ unsigned char pkt_cnt = 0;
+ unsigned short rxbuf_rdpt;
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
+ m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
+
+ do {
+ m_nic_read_data (6, buffer);
+ next_pointer_lsb = buffer[0];
+ next_pointer_msb = buffer[1];
+ pkt_len = buffer[2];
+ pkt_len |= (unsigned short) buffer[3] << 8;
+ status = buffer[4];
+ status |= (unsigned short) buffer[5] << 8;
+
+ if (pkt_len <= ENC_MAX_FRM_LEN)
+ copy_len = pkt_len;
+ else
+ copy_len = 0;
+
+ if ((status & (1L << 7)) == 0) /* check Received Ok bit */
+ copy_len = 0;
+
+ /* taken from the Linux driver */
+ /* check if next pointer is resonable */
+ if ((((unsigned int)next_pointer_msb << 8) |
+ (unsigned int)next_pointer_lsb) >= ENC_TX_BUF_START)
+ copy_len = 0;
+
+ if (copy_len > 0) {
+ m_nic_read_data (copy_len, buffer);
+ }
+
+ /* advance read pointer to next pointer */
+ m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
+ m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
+
+ /* decrease packet counter */
+ m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
+
+ /* taken from the Linux driver */
+ /* Only odd values should be written to ERXRDPTL,
+ * see errata B4 pt.13
+ */
+ rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
+ if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 |
+ m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt >
+ (m_nic_read(CTL_REG_ERXNDH) << 8 |
+ m_nic_read(CTL_REG_ERXNDL)))) {
+ m_nic_write(CTL_REG_ERXRDPTL, m_nic_read(CTL_REG_ERXNDL));
+ m_nic_write(CTL_REG_ERXRDPTH, m_nic_read(CTL_REG_ERXNDH));
+ } else {
+ m_nic_write(CTL_REG_ERXRDPTL, rxbuf_rdpt & 0xFF);
+ m_nic_write(CTL_REG_ERXRDPTH, rxbuf_rdpt >> 8);
+ }
+
+ /* move to bank 1 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+
+ /* read pktcnt */
+ pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1,
+ (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ if (copy_len == 0) {
+ eir_reg = m_nic_read (CTL_REG_EIR);
+ encReceiverReset ();
+ printf ("eth_rx: copy_len=0\n");
+ continue;
+ }
+
+ NetReceive ((unsigned char *) buffer, pkt_len);
+
+ eir_reg = m_nic_read (CTL_REG_EIR);
+ } while (pkt_cnt); /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
+}
+
+static void encWriteReg (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x40 | regNo); /* write in regNo */
+ spi_write (data);
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (0x1f); /* write reg 0x1f */
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c)
+{
+ unsigned char readback;
+ int i;
+
+ spi_lock ();
+
+ for (i = 0; i < c; i++) {
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x40 | regNo); /* write in regNo */
+ spi_write (data);
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (0x1f); /* write reg 0x1f */
+
+ enc_disable ();
+
+ spi_unlock (); /* we must unlock spi first */
+
+ readback = encReadReg (regNo);
+
+ spi_lock ();
+
+ if (readback == data)
+ break;
+ }
+ spi_unlock ();
+
+ if (i == c) {
+ printf ("enc28j60: write reg %d failed\n", regNo);
+ }
+}
+
+static unsigned char encReadReg (unsigned char regNo)
+{
+ unsigned char rxByte;
+
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x1f); /* read reg 0x1f */
+
+ bank = spi_read () & 0x3;
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (regNo);
+ rxByte = spi_read ();
+
+ /* check if MAC or MII register */
+ if (((bank == 2) && (regNo <= 0x1a)) ||
+ ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) {
+ /* ignore first byte and read another byte */
+ rxByte = spi_read ();
+ }
+
+ enc_disable ();
+ spi_unlock ();
+
+ return rxByte;
+}
+
+static void encReadBuff (unsigned short length, unsigned char *pBuff)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x20 | 0x1a); /* read buffer memory */
+
+ while (length--) {
+ if (pBuff != NULL)
+ *pBuff++ = spi_read ();
+ else
+ spi_write (0);
+ }
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encWriteBuff (unsigned short length, unsigned char *pBuff)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x60 | 0x1a); /* write buffer memory */
+
+ spi_write (0x00); /* control byte */
+
+ while (length--)
+ spi_write (*pBuff++);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encBitSet (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x80 | regNo); /* bit field set */
+ spi_write (data);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encBitClr (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0xA0 | regNo); /* bit field clear */
+ spi_write (data);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encReset (void)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0xff); /* soft reset */
+
+ enc_disable ();
+ spi_unlock ();
+
+ /* sleep 1 ms. See errata pt. 2 */
+ udelay (1000);
+}
+
+static void encInit (unsigned char *pEthAddr)
+{
+ unsigned short phid1 = 0;
+ unsigned short phid2 = 0;
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ /*
+ * Setup the buffer space. The reset values are valid for the
+ * other pointers.
+ */
+ /* We shall not write to ERXST, see errata pt. 5. Instead we
+ have to make sure that ENC_RX_BUS_START is 0. */
+ m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1);
+
+ /* taken from the Linux driver */
+ m_nic_write_retry (CTL_REG_ERXNDL, (ENC_RX_BUF_END & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERXNDH, (ENC_RX_BUF_END >> 8), 1);
+
+ m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1);
+
+ next_pointer_lsb = (ENC_RX_BUF_START & 0xFF);
+ next_pointer_msb = (ENC_RX_BUF_START >> 8);
+
+ /* verify identification */
+ phid1 = phyRead (PHY_REG_PHID1);
+ phid2 = phyRead (PHY_REG_PHID2);
+
+ if (phid1 != ENC_PHID1_VALUE
+ || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) {
+ printf ("ERROR: failed to identify controller\n");
+ printf ("phid1 = %x, phid2 = %x\n",
+ phid1, (phid2 & ENC_PHID2_MASK));
+ printf ("should be phid1 = %x, phid2 = %x\n",
+ ENC_PHID1_VALUE, ENC_PHID2_VALUE);
+ }
+
+ /*
+ * --- MAC Initialization ---
+ */
+
+ /* Pull MAC out of Reset */
+
+ /* switch to bank 2 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* enable MAC to receive frames */
+ /* added some bits from the Linux driver */
+ m_nic_write_retry (CTL_REG_MACON1
+ ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS)
+ ,10);
+
+ /* configure pad, tx-crc and duplex */
+ /* added a bit from the Linux driver */
+ m_nic_write_retry (CTL_REG_MACON3
+ ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN)
+ ,10);
+
+ /* added 4 new lines from the Linux driver */
+ /* Allow infinite deferals if the medium is continously busy */
+ m_nic_write_retry(CTL_REG_MACON4, (1<<6) /*ENC_MACON4_DEFER*/, 10);
+
+ /* Late collisions occur beyond 63 bytes */
+ m_nic_write_retry(CTL_REG_MACLCON2, 63, 10);
+
+ /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */
+ m_nic_write_retry(CTL_REG_MAIPGL, 0x12, 10);
+
+ /*
+ * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended
+ * 0x0c for half-duplex. Nothing for full-duplex
+ */
+ m_nic_write_retry(CTL_REG_MAIPGH, 0x0C, 10);
+
+ /* set maximum frame length */
+ m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10);
+ m_nic_write_retry (CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10);
+
+ /*
+ * Set MAC back-to-back inter-packet gap. Recommended 0x12 for half duplex
+ * and 0x15 for full duplex.
+ */
+ m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10);
+
+ /* set MAC address */
+
+ /* switch to bank 3 */
+ m_nic_bfs (CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1));
+
+ m_nic_write_retry (CTL_REG_MAADR0, pEthAddr[5], 1);
+ m_nic_write_retry (CTL_REG_MAADR1, pEthAddr[4], 1);
+ m_nic_write_retry (CTL_REG_MAADR2, pEthAddr[3], 1);
+ m_nic_write_retry (CTL_REG_MAADR3, pEthAddr[2], 1);
+ m_nic_write_retry (CTL_REG_MAADR4, pEthAddr[1], 1);
+ m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1);
+
+ /*
+ * PHY Initialization taken from the Linux driver
+ */
+
+ /* Prevent automatic loopback of data beeing transmitted by setting
+ ENC_PHCON2_HDLDIS */
+ phyWrite(PHY_REG_PHCON2, (1<<8));
+
+ /* LEDs configuration
+ * LEDA: LACFG = 0100 -> display link status
+ * LEDB: LBCFG = 0111 -> display TX & RX activity
+ * STRCH = 1 -> LED pulses
+ */
+ phyWrite(PHY_REG_PHLCON, 0x0472);
+
+ /* Reset PDPXMD-bit => half duplex */
+ phyWrite(PHY_REG_PHCON1, 0);
+
+ /*
+ * Receive settings
+ */
+
+#ifdef CONFIG_USE_IRQ
+ /* enable interrupts */
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+}
+
+/*****************************************************************************
+ *
+ * Description:
+ * Read PHY registers.
+ *
+ * NOTE! This function will change to Bank 2.
+ *
+ * Params:
+ * [in] addr address of the register to read
+ *
+ * Returns:
+ * The value in the register
+ */
+static unsigned short phyRead (unsigned char addr)
+{
+ unsigned short ret = 0;
+
+ /* move to bank 2 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* write address to MIREGADR */
+ m_nic_write (CTL_REG_MIREGADR, addr);
+
+ /* set MICMD.MIIRD */
+ m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD);
+
+ /* taken from the Linux driver */
+ /* move to bank 3 */
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* poll MISTAT.BUSY bit until operation is complete */
+ while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
+ static int cnt = 0;
+
+ if (cnt++ >= 1000) {
+ /* GJ - this seems extremely dangerous! */
+ /* printf("#"); */
+ cnt = 0;
+ }
+ }
+
+ /* taken from the Linux driver */
+ /* move to bank 2 */
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* clear MICMD.MIIRD */
+ m_nic_write (CTL_REG_MICMD, 0);
+
+ ret = (m_nic_read (CTL_REG_MIRDH) << 8);
+ ret |= (m_nic_read (CTL_REG_MIRDL) & 0xFF);
+
+ return ret;
+}
+
+/*****************************************************************************
+ *
+ * Taken from the Linux driver.
+ * Description:
+ * Write PHY registers.
+ *
+ * NOTE! This function will change to Bank 3.
+ *
+ * Params:
+ * [in] addr address of the register to write to
+ * [in] data to be written
+ *
+ * Returns:
+ * None
+ */
+static void phyWrite(unsigned char addr, unsigned short data)
+{
+ /* move to bank 2 */
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* write address to MIREGADR */
+ m_nic_write(CTL_REG_MIREGADR, addr);
+
+ m_nic_write(CTL_REG_MIWRL, data & 0xff);
+ m_nic_write(CTL_REG_MIWRH, data >> 8);
+
+ /* move to bank 3 */
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* poll MISTAT.BUSY bit until operation is complete */
+ while((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
+ static int cnt = 0;
+
+ if(cnt++ >= 1000) {
+ cnt = 0;
+ }
+ }
+}
#define CONFIG_INITRD_TAG
#define CONFIG_MMC 1
/* we use this ethernet chip */
-#define CONFIG_ENC28J60
+#define CONFIG_ENC28J60_LPC2292
#endif /* __CONFIG_H */
#define CONFIG_INITRD_TAG
#define CONFIG_MMC 1
/* we use this ethernet chip */
-#define CONFIG_ENC28J60
+#define CONFIG_ENC28J60_LPC2292
#endif /* __CONFIG_H */
projects / project / bcm63xx / u-boot.git / commitdiff