/* ------------------------------------------------------------------------- */
-int testdram (void)
+void reset_phy(void)
{
- /* TODO: XXX XXX XXX */
- printf ("test: 16 MB - ok\n");
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_CMD_NAND)
-#include <linux/mtd/nand_legacy.h>
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
-
-void nand_init(void)
-{
- nand_probe(CFG_NAND_BASE);
- if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
- print_size(nand_dev_desc[0].totlen, "\n");
- }
-}
+#ifdef CONFIG_LXT971_NO_SLEEP
-
+ /*
+ * Disable sleep mode in LXT971
+ */
+ lxt971_no_sleep();
#endif
+}
--- /dev/null
- #if (CONFIG_COMMANDS & CFG_CMD_NAND)
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
- #endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
++#if defined(CONFIG_CMD_NAND)
+#include <asm/io.h>
+#include <nand.h>
+
+/*
+ * hardware specific access to control-lines
+ */
+static void esd405ep_nand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+{
+ switch(cmd) {
+ case NAND_CTL_SETCLE:
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CLE);
+ break;
+ case NAND_CTL_CLRCLE:
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CLE);
+ break;
+ case NAND_CTL_SETALE:
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_ALE);
+ break;
+ case NAND_CTL_CLRALE:
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_ALE);
+ break;
+ case NAND_CTL_SETNCE:
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CE);
+ break;
+ case NAND_CTL_CLRNCE:
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE);
+ break;
+ }
+}
+
+
+/*
+ * read device ready pin
+ */
+static int esd405ep_nand_device_ready(struct mtd_info *mtdinfo)
+{
+ if (in_be32((void *)GPIO0_IR) & CFG_NAND_RDY)
+ return 1;
+ return 0;
+}
+
+
+int board_nand_init(struct nand_chip *nand)
+{
+ /*
+ * Set NAND-FLASH GPIO signals to defaults
+ */
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE);
+
+ /*
+ * Initialize nand_chip structure
+ */
+ nand->hwcontrol = esd405ep_nand_hwcontrol;
+ nand->dev_ready = esd405ep_nand_device_ready;
+ nand->eccmode = NAND_ECC_SOFT;
+ nand->chip_delay = NAND_BIG_DELAY_US;
+ nand->options = NAND_SAMSUNG_LP_OPTIONS;
+ return 0;
+}
++#endif
mtdcr(memcfga, mem_mb0cf);
val = mfdcr(memcfgd);
-#if 0
- printf("\nmb0cf=%x\n", val); /* test-only */
- printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
- /* TODO: XXX XXX XXX */
- printf ("test: 16 MB - ok\n");
-
- return (0);
-}
--
--/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_CMD_NAND)
-#include <linux/mtd/nand_legacy.h>
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
-
-void nand_init(void)
-{
- nand_probe(CFG_NAND_BASE);
- if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
- print_size(nand_dev_desc[0].totlen, "\n");
- }
-}
-#endif
printf("\nLoading from %s, offset 0x%lx\n", nand->name, offset);
cnt = nand->oobblock;
- r = nand_read(nand, offset, &cnt, (u_char *) addr);
+ if (jffs2) {
+ nand_read_options_t opts;
+ memset(&opts, 0, sizeof(opts));
+ opts.buffer = (u_char*) addr;
+ opts.length = cnt;
+ opts.offset = offset;
+ opts.quiet = 1;
+ r = nand_read_opts(nand, &opts);
+ } else {
+ r = nand_read(nand, offset, &cnt, (u_char *) addr);
+ }
+
if (r) {
puts("** Read error\n");
- SHOW_BOOT_PROGRESS(-1);
+ show_boot_progress (-56);
return 1;
}
+ show_boot_progress (56);
hdr = (image_header_t *) addr;
print_image_hdr(hdr);
cnt = (ntohl(hdr->ih_size) + sizeof (image_header_t));
+ if (jffs2) {
+ nand_read_options_t opts;
+ memset(&opts, 0, sizeof(opts));
+ opts.buffer = (u_char*) addr;
+ opts.length = cnt;
+ opts.offset = offset;
+ opts.quiet = 1;
+ r = nand_read_opts(nand, &opts);
+ } else {
+ r = nand_read(nand, offset, &cnt, (u_char *) addr);
+ }
- r = nand_read(nand, offset, &cnt, (u_char *) addr);
if (r) {
puts("** Read error\n");
- SHOW_BOOT_PROGRESS(-1);
+ show_boot_progress (-58);
return 1;
}
+ show_boot_progress (58);
/* Loading ok, update default load address */
U_BOOT_CMD(nboot, 4, 1, do_nandboot,
"nboot - boot from NAND device\n",
- "[partition] | [[[loadAddr] dev] offset]\n");
+ "[.jffs2] [partition] | [[[loadAddr] dev] offset]\n");
- #endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
+ #endif
#else /* CFG_NAND_LEGACY */
/*
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
- #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_DNS | \
- CONFIG_BOOTP_DNS2 | \
- CONFIG_BOOTP_SEND_HOSTNAME )
-
- #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_BSP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_NAND | \
- CFG_CMD_I2C | \
- CFG_CMD_DATE | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_EEPROM )
-
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
- #include <cmd_confdefs.h>
+ /*
+ * BOOTP options
+ */
+ #define CONFIG_BOOTP_SUBNETMASK
+ #define CONFIG_BOOTP_GATEWAY
+ #define CONFIG_BOOTP_HOSTNAME
+ #define CONFIG_BOOTP_BOOTPATH
+ #define CONFIG_BOOTP_DNS
+ #define CONFIG_BOOTP_DNS2
+ #define CONFIG_BOOTP_SEND_HOSTNAME
+
+
+ /*
+ * Command line configuration.
+ */
+ #include <config_cmd_default.h>
+
+ #define CONFIG_CMD_DHCP
+ #define CONFIG_CMD_BSP
+ #define CONFIG_CMD_PCI
+ #define CONFIG_CMD_IRQ
+ #define CONFIG_CMD_ELF
+ #define CONFIG_CMD_NAND
+ #define CONFIG_CMD_I2C
+ #define CONFIG_CMD_DATE
+ #define CONFIG_CMD_MII
+ #define CONFIG_CMD_PING
+ #define CONFIG_CMD_EEPROM
+
-#define CFG_NAND_LEGACY
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
#define CONFIG_SUPPORT_VFAT
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
- #include <cmd_confdefs.h>
-#define CFG_NAND_LEGACY
--
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
#define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */
#endif
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
- #include <cmd_confdefs.h>
-#define CFG_NAND_LEGACY
--
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
#define CONFIG_SUPPORT_VFAT
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
- #include <cmd_confdefs.h>
-#define CFG_NAND_LEGACY
-
--
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
#undef CONFIG_AUTO_UPDATE /* autoupdate via compactflash */
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
- #include <cmd_confdefs.h>
-#define CFG_NAND_LEGACY
--
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
#define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */
#undef CONFIG_AUTO_UPDATE_SHOW /* use board show routine */
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
- #include <cmd_confdefs.h>
-#define CFG_NAND_LEGACY
--
#undef CONFIG_BZIP2 /* include support for bzip2 compressed images */
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SUPPORT_VFAT
#define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */
-#define CONFIG_AUTO_UPDATE_SHOW 1 /* use board show routine */
- /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
- #include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/
projects / project / bcm63xx / u-boot.git / commitdiff