U-Boot 2021.10 has been released.
Rebase mediatek patches on top of new release and remove some patches
which have been merged upstream.
Tested on Bananapi BPi-R2 (mt7623), Bananapi BPi-R64 (mt7622) and
Linksys E8450 (mt7622).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
-PKG_VERSION:=2021.04
-PKG_HASH:=0d438b1bb5cceb57a18ea2de4a0d51f7be5b05b98717df05938636e0aadfe11a
+PKG_VERSION:=2021.10
+PKG_HASH:=cde723e19262e646f2670d25e5ec4b1b368490de950d4e26275a988c36df0bd4
PKG_BUILD_DEPENDS:=arm-trusted-firmware-tools/host
include $(INCLUDE_DIR)/u-boot.mk
$(PKG_BUILD_DIR)/u-boot.fip
endef
+define Build/Configure
+ $(call Build/Configure/U-Boot)
+ sed -i 's/CONFIG_TOOLS_LIBCRYPTO=y/# CONFIG_TOOLS_LIBCRYPTO is not set/' $(PKG_BUILD_DIR)/.config
+endef
+
define Build/Compile
$(call Build/Compile/U-Boot)
ifeq ($(UBOOT_IMAGE),u-boot.fip))
-From 5efb7855a9d33ac897d6e2a7117e4e3d35d433a5 Mon Sep 17 00:00:00 2001
+From 34ed9f6d3018d32c7c015e57c9985d3c4c07b706 Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Thu, 11 Mar 2021 10:28:53 +0000
-Subject: [PATCH 01/21] Revert "clk: Add debugging for return values"
+Subject: [PATCH 01/12] Revert "clk: Add debugging for return values"
This reverts commit 5c5992cb90cf9ca4d51e38d9a95a13c293904df5.
---
--- a/drivers/clk/clk-uclass.c
+++ b/drivers/clk/clk-uclass.c
-@@ -84,7 +84,7 @@ static int clk_get_by_index_tail(int ret
+@@ -87,7 +87,7 @@ static int clk_get_by_index_tail(int ret
if (ret) {
debug("%s: uclass_get_device_by_of_offset failed: err=%d\n",
__func__, ret);
}
clk->dev = dev_clk;
-@@ -97,15 +97,14 @@ static int clk_get_by_index_tail(int ret
+@@ -100,15 +100,14 @@ static int clk_get_by_index_tail(int ret
ret = clk_of_xlate_default(clk, args);
if (ret) {
debug("of_xlate() failed: %d\n", ret);
}
static int clk_get_by_indexed_prop(struct udevice *dev, const char *prop_name,
-@@ -124,7 +123,7 @@ static int clk_get_by_indexed_prop(struc
+@@ -127,7 +126,7 @@ static int clk_get_by_indexed_prop(struc
if (ret) {
debug("%s: fdtdec_parse_phandle_with_args failed: err=%d\n",
__func__, ret);
}
-@@ -472,7 +471,6 @@ int clk_free(struct clk *clk)
+@@ -502,7 +501,6 @@ int clk_free(struct clk *clk)
ulong clk_get_rate(struct clk *clk)
{
const struct clk_ops *ops;
debug("%s(clk=%p)\n", __func__, clk);
if (!clk_valid(clk))
-@@ -482,11 +480,7 @@ ulong clk_get_rate(struct clk *clk)
+@@ -512,11 +510,7 @@ ulong clk_get_rate(struct clk *clk)
if (!ops->get_rate)
return -ENOSYS;
+++ /dev/null
-From 6f18e581a7e98db3675b4c111701263647b20781 Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Thu, 17 Dec 2020 19:29:56 +0800
-Subject: [PATCH 03/21] pinctrl: mediatek: fix wrong assignment in
- mtk_get_pin_name
-
-This is a bug fix for mtk pinctrl common part. Appearently pins should be
-used instead of grps in mtk_get_pin_name().
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
----
- drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
-@@ -219,7 +219,7 @@ static const char *mtk_get_pin_name(stru
- {
- struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
-
-- if (!priv->soc->grps[selector].name)
-+ if (!priv->soc->pins[selector].name)
- return mtk_pinctrl_dummy_name;
-
- return priv->soc->pins[selector].name;
+++ /dev/null
-From ca73da39ff0c9f599f75d7ccac0196030aa946b9 Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Thu, 17 Dec 2020 19:32:48 +0800
-Subject: [PATCH 04/21] pinctrl: mediatek: add get_pin_muxing ops for mediatek
- pinctrl
-
-This patch add get_pin_muxing support for mediatek pinctrl drivers
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
----
- drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
-@@ -232,6 +232,19 @@ static int mtk_get_pins_count(struct ude
- return priv->soc->npins;
- }
-
-+static int mtk_get_pin_muxing(struct udevice *dev,
-+ unsigned int selector,
-+ char *buf, int size)
-+{
-+ int val, err;
-+ err = mtk_hw_get_value(dev, selector, PINCTRL_PIN_REG_MODE, &val);
-+ if (err)
-+ return err;
-+
-+ snprintf(buf, size, "Aux Func.%d", val);
-+ return 0;
-+}
-+
- static const char *mtk_get_group_name(struct udevice *dev,
- unsigned int selector)
- {
-@@ -512,6 +525,7 @@ static int mtk_pinconf_group_set(struct
- const struct pinctrl_ops mtk_pinctrl_ops = {
- .get_pins_count = mtk_get_pins_count,
- .get_pin_name = mtk_get_pin_name,
-+ .get_pin_muxing = mtk_get_pin_muxing,
- .get_groups_count = mtk_get_groups_count,
- .get_group_name = mtk_get_group_name,
- .get_functions_count = mtk_get_functions_count,
+++ /dev/null
-From d3fbbef13853a695cdea75a980a3d6bd150a68c1 Mon Sep 17 00:00:00 2001
-From: Weijie Gao <weijie.gao@mediatek.com>
-Date: Mon, 11 Jan 2021 10:17:15 +0800
-Subject: [PATCH 05/21] pinctrl: mediatek: do not probe gpio driver if not
- enabled
-
-The mtk pinctrl driver is a combination driver with support for both
-pinctrl and gpio. When this driver is used in SPL, gpio support may not be
-enabled, and this will result in a compilation error.
-
-To fix this, macros are added to make sure gpio related code will only be
-compiled when gpio support is enabled.
-
-Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
----
- drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 12 ++++++++----
- 1 file changed, 8 insertions(+), 4 deletions(-)
-
---- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
-@@ -540,6 +540,8 @@ const struct pinctrl_ops mtk_pinctrl_ops
- .set_state = pinctrl_generic_set_state,
- };
-
-+#if CONFIG_IS_ENABLED(DM_GPIO) || \
-+ (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO_SUPPORT))
- static int mtk_gpio_get(struct udevice *dev, unsigned int off)
- {
- int val, err;
-@@ -647,12 +649,13 @@ static int mtk_gpiochip_register(struct
-
- return 0;
- }
-+#endif
-
- int mtk_pinctrl_common_probe(struct udevice *dev,
- struct mtk_pinctrl_soc *soc)
- {
- struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
-- int ret;
-+ int ret = 0;
-
- priv->base = dev_read_addr_ptr(dev);
- if (!priv->base)
-@@ -660,9 +663,10 @@ int mtk_pinctrl_common_probe(struct udev
-
- priv->soc = soc;
-
-+#if CONFIG_IS_ENABLED(DM_GPIO) || \
-+ (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO_SUPPORT))
- ret = mtk_gpiochip_register(dev);
-- if (ret)
-- return ret;
-+#endif
-
-- return 0;
-+ return ret;
- }
+++ /dev/null
-From 1c6d07abf7fc79bf3950dc9ac56e3b566c334d3d Mon Sep 17 00:00:00 2001
-From: Weijie Gao <weijie.gao@mediatek.com>
-Date: Wed, 13 Jan 2021 16:29:23 +0800
-Subject: [PATCH 06/21] pinctrl: mt7629: add jtag function and pin group
-
-The EPHY LEDs of mt7629 can be used as JTAG. This patch adds the jtag pin
-group to the pinctrl driver.
-
-Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
----
- drivers/pinctrl/mediatek/pinctrl-mt7629.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/pinctrl/mediatek/pinctrl-mt7629.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7629.c
-@@ -201,6 +201,10 @@ static int mt7629_wf2g_led_funcs[] = { 1
- static int mt7629_wf5g_led_pins[] = { 18, };
- static int mt7629_wf5g_led_funcs[] = { 1, };
-
-+/* LED for EPHY used as JTAG */
-+static int mt7629_ephy_leds_jtag_pins[] = { 12, 13, 14, 15, 16, };
-+static int mt7629_ephy_leds_jtag_funcs[] = { 7, 7, 7, 7, 7, };
-+
- /* Watchdog */
- static int mt7629_watchdog_pins[] = { 11, };
- static int mt7629_watchdog_funcs[] = { 1, };
-@@ -297,6 +301,7 @@ static const struct mtk_group_desc mt762
- PINCTRL_PIN_GROUP("ephy_led2", mt7629_ephy_led2),
- PINCTRL_PIN_GROUP("ephy_led3", mt7629_ephy_led3),
- PINCTRL_PIN_GROUP("ephy_led4", mt7629_ephy_led4),
-+ PINCTRL_PIN_GROUP("ephy_leds_jtag", mt7629_ephy_leds_jtag),
- PINCTRL_PIN_GROUP("wf2g_led", mt7629_wf2g_led),
- PINCTRL_PIN_GROUP("wf5g_led", mt7629_wf5g_led),
- PINCTRL_PIN_GROUP("watchdog", mt7629_watchdog),
-@@ -364,6 +369,7 @@ static const char *const mt7629_uart_gro
- static const char *const mt7629_wdt_groups[] = { "watchdog", };
- static const char *const mt7629_wifi_groups[] = { "wf0_5g", "wf0_2g", };
- static const char *const mt7629_flash_groups[] = { "snfi", "spi_nor" };
-+static const char *const mt7629_jtag_groups[] = { "ephy_leds_jtag" };
-
- static const struct mtk_function_desc mt7629_functions[] = {
- {"eth", mt7629_ethernet_groups, ARRAY_SIZE(mt7629_ethernet_groups)},
-@@ -376,6 +382,7 @@ static const struct mtk_function_desc mt
- {"watchdog", mt7629_wdt_groups, ARRAY_SIZE(mt7629_wdt_groups)},
- {"wifi", mt7629_wifi_groups, ARRAY_SIZE(mt7629_wifi_groups)},
- {"flash", mt7629_flash_groups, ARRAY_SIZE(mt7629_flash_groups)},
-+ {"jtag", mt7629_jtag_groups, ARRAY_SIZE(mt7629_jtag_groups)},
- };
-
- static struct mtk_pinctrl_soc mt7629_data = {
+++ /dev/null
-From c47a5b927787a463eff8f67339d91e60fe0381c4 Mon Sep 17 00:00:00 2001
-From: Weijie Gao <weijie.gao@mediatek.com>
-Date: Tue, 2 Mar 2021 15:02:50 +0800
-Subject: [PATCH 07/21] configs: mt7622: use ARMv8 Generic Timer instead of
- mtk_timer
-
-It's better to use the generic timer which is correctly initialized by
-the ATF. The generic timer has higher resolution than the mtk_timer.
-
-Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
----
- configs/mt7622_rfb_defconfig | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/configs/mt7622_rfb_defconfig
-+++ b/configs/mt7622_rfb_defconfig
-@@ -51,8 +51,6 @@ CONFIG_SPI=y
- CONFIG_DM_SPI=y
- CONFIG_MTK_SNOR=y
- CONFIG_SYSRESET_WATCHDOG=y
--CONFIG_TIMER=y
--CONFIG_MTK_TIMER=y
- CONFIG_WDT_MTK=y
- CONFIG_LZO=y
- CONFIG_HEXDUMP=y
+++ /dev/null
-From 4bee3f9e285007ccf77ca9916fff3d93fc4d8a80 Mon Sep 17 00:00:00 2001
-From: Weijie Gao <weijie.gao@mediatek.com>
-Date: Tue, 2 Mar 2021 15:43:27 +0800
-Subject: [PATCH 08/21] dts: mt7629: enable JTAG pins by default
-
-The EPHY LEDs belongs to the built-in FE switch of MT7629, which is barely
-used. These LED pins on reference boards are used as JTAG socket. So it's
-a good idea to change the default state to JTAG, and this will make it
-convenience for debugging.
-
-Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
----
- arch/arm/dts/mt7629-rfb.dts | 10 ++++++++++
- arch/arm/dts/mt7629.dtsi | 6 ++++++
- 2 files changed, 16 insertions(+)
-
---- a/arch/arm/dts/mt7629-rfb.dts
-+++ b/arch/arm/dts/mt7629-rfb.dts
-@@ -36,6 +36,16 @@
- };
-
- &pinctrl {
-+ state_default: pinmux_conf {
-+ u-boot,dm-pre-reloc;
-+
-+ mux {
-+ function = "jtag";
-+ groups = "ephy_leds_jtag";
-+ u-boot,dm-pre-reloc;
-+ };
-+ };
-+
- snfi_pins: snfi-pins {
- mux {
- function = "flash";
---- a/arch/arm/dts/mt7629.dtsi
-+++ b/arch/arm/dts/mt7629.dtsi
-@@ -152,6 +152,12 @@
- compatible = "mediatek,mt7629-pinctrl";
- reg = <0x10217000 0x8000>;
-
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&state_default>;
-+
-+ state_default: pinmux_conf {
-+ };
-+
- gpio: gpio-controller {
- gpio-controller;
- #gpio-cells = <2>;
-From f3f320af7078a8c5647d870a31c1d3695dacd7cf Mon Sep 17 00:00:00 2001
+From 938ba7ed996a86c9cc7af08b69df57b8b4c09510 Mon Sep 17 00:00:00 2001
From: Weijie Gao <weijie.gao@mediatek.com>
Date: Tue, 2 Mar 2021 15:47:45 +0800
-Subject: [PATCH 09/21] board: mediatek: add more network configurations
+Subject: [PATCH 02/12] board: mediatek: add more network configurations
Make the network configurations uniform for mediatek boards
-From ed880b7572e1135e3bd8382d4670a375f7d9c91b Mon Sep 17 00:00:00 2001
+From 1d4fcea788e579934a1ad0a90cecd6e1761127d1 Mon Sep 17 00:00:00 2001
From: Weijie Gao <weijie.gao@mediatek.com>
Date: Tue, 2 Mar 2021 15:56:17 +0800
-Subject: [PATCH 10/21] mmc: mtk-sd: increase the minimum bus frequency
+Subject: [PATCH 03/12] mmc: mtk-sd: increase the minimum bus frequency
With a 48MHz input clock, the lowest bus frequency can be as low as
48000000 / (4 * 4095) = 2930Hz. Such an extremely low frequency will cause
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
---
- drivers/mmc/mtk-sd.c | 5 +++++
- 1 file changed, 5 insertions(+)
+ drivers/mmc/mtk-sd.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mmc/mtk-sd.c
+++ b/drivers/mmc/mtk-sd.c
-@@ -232,6 +232,8 @@
+@@ -232,7 +232,7 @@
#define SCLK_CYCLES_SHIFT 20
+-#define MIN_BUS_CLK 200000
+#define MIN_BUS_CLK 260000
-+
+
#define CMD_INTS_MASK \
(MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO)
-
-@@ -1639,6 +1641,9 @@ static int msdc_drv_probe(struct udevice
- else
- cfg->f_min = host->src_clk_freq / (4 * 4095);
-
-+ if (cfg->f_min < MIN_BUS_CLK)
-+ cfg->f_min = MIN_BUS_CLK;
-+
- if (cfg->f_max < cfg->f_min || cfg->f_max > host->src_clk_freq)
- cfg->f_max = host->src_clk_freq;
-
+++ /dev/null
-From d8bde59186dafdea5bbe8d29d3a6ae7cac98e9d0 Mon Sep 17 00:00:00 2001
-From: Weijie Gao <weijie.gao@mediatek.com>
-Date: Mon, 25 Jan 2021 11:19:08 +0800
-Subject: [PATCH 11/21] serial: serial-mtk: rewrite the setbrg function
-
-Currently the setbrg logic of serial-mtk is messy, and should be rewritten.
-Also an option is added to make it possible to use highspeed=3 mode for all
-bauds.
-
-The new logic is:
-1. If baud clock > 12MHz
- a) If baud <= 115200, highspeed=0 mode will be used (ns16550 compatible)
- b) If baud <= 576000, highspeed=2 mode will be used
- c) any baud > 576000, highspeed=3 mode will be used
-2. If baud clock <= 12MHz
- Always uses highspeed=3 mode
- a) If baud <= 115200, calculates the divisor using DIV_ROUND_CLOSEST
- b) any baud > 115200, the same as 1. c)
-
-Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
----
- drivers/serial/serial_mtk.c | 74 +++++++++++++++++--------------------
- 1 file changed, 33 insertions(+), 41 deletions(-)
-
---- a/drivers/serial/serial_mtk.c
-+++ b/drivers/serial/serial_mtk.c
-@@ -73,74 +73,64 @@ struct mtk_serial_regs {
- struct mtk_serial_priv {
- struct mtk_serial_regs __iomem *regs;
- u32 clock;
-+ bool force_highspeed;
- };
-
- static void _mtk_serial_setbrg(struct mtk_serial_priv *priv, int baud)
- {
-- bool support_clk12m_baud115200;
-- u32 quot, samplecount, realbaud;
-+ u32 quot, realbaud, samplecount = 1;
-
-- if ((baud <= 115200) && (priv->clock == 12000000))
-- support_clk12m_baud115200 = true;
-- else
-- support_clk12m_baud115200 = false;
-+ /* Special case for low baud clock */
-+ if ((baud <= 115200) && (priv->clock == 12000000)) {
-+ writel(3, &priv->regs->highspeed);
-+
-+ quot = DIV_ROUND_CLOSEST(priv->clock, 256 * baud);
-+ if (quot == 0)
-+ quot = 1;
-+
-+ samplecount = DIV_ROUND_CLOSEST(priv->clock, quot * baud);
-+
-+ realbaud = priv->clock / samplecount / quot;
-+ if ((realbaud > BAUD_ALLOW_MAX(baud)) ||
-+ (realbaud < BAUD_ALLOW_MIX(baud))) {
-+ pr_info("baud %d can't be handled\n", baud);
-+ }
-+
-+ goto set_baud;
-+ }
-+
-+ if (priv->force_highspeed)
-+ goto use_hs3;
-
- if (baud <= 115200) {
- writel(0, &priv->regs->highspeed);
- quot = DIV_ROUND_CLOSEST(priv->clock, 16 * baud);
--
-- if (support_clk12m_baud115200) {
-- writel(3, &priv->regs->highspeed);
-- quot = DIV_ROUND_CLOSEST(priv->clock, 256 * baud);
-- if (quot == 0)
-- quot = 1;
--
-- samplecount = DIV_ROUND_CLOSEST(priv->clock,
-- quot * baud);
-- if (samplecount != 0) {
-- realbaud = priv->clock / samplecount / quot;
-- if ((realbaud > BAUD_ALLOW_MAX(baud)) ||
-- (realbaud < BAUD_ALLOW_MIX(baud))) {
-- pr_info("baud %d can't be handled\n",
-- baud);
-- }
-- } else {
-- pr_info("samplecount is 0\n");
-- }
-- }
- } else if (baud <= 576000) {
- writel(2, &priv->regs->highspeed);
-
- /* Set to next lower baudrate supported */
- if ((baud == 500000) || (baud == 576000))
- baud = 460800;
-+
- quot = DIV_ROUND_UP(priv->clock, 4 * baud);
- } else {
-+use_hs3:
- writel(3, &priv->regs->highspeed);
-+
- quot = DIV_ROUND_UP(priv->clock, 256 * baud);
-+ samplecount = DIV_ROUND_CLOSEST(priv->clock, quot * baud);
- }
-
-+set_baud:
- /* set divisor */
- writel(UART_LCR_WLS_8 | UART_LCR_DLAB, &priv->regs->lcr);
- writel(quot & 0xff, &priv->regs->dll);
- writel((quot >> 8) & 0xff, &priv->regs->dlm);
- writel(UART_LCR_WLS_8, &priv->regs->lcr);
-
-- if (baud > 460800) {
-- u32 tmp;
--
-- tmp = DIV_ROUND_CLOSEST(priv->clock, quot * baud);
-- writel(tmp - 1, &priv->regs->sample_count);
-- writel((tmp - 2) >> 1, &priv->regs->sample_point);
-- } else {
-- writel(0, &priv->regs->sample_count);
-- writel(0xff, &priv->regs->sample_point);
-- }
--
-- if (support_clk12m_baud115200) {
-- writel(samplecount - 1, &priv->regs->sample_count);
-- writel((samplecount - 2) >> 1, &priv->regs->sample_point);
-- }
-+ /* set highspeed mode sample count & point */
-+ writel(samplecount - 1, &priv->regs->sample_count);
-+ writel((samplecount - 2) >> 1, &priv->regs->sample_point);
- }
-
- static int _mtk_serial_putc(struct mtk_serial_priv *priv, const char ch)
-@@ -248,6 +238,8 @@ static int mtk_serial_of_to_plat(struct
- return -EINVAL;
- }
-
-+ priv->force_highspeed = dev_read_bool(dev, "mediatek,force-highspeed");
-+
- return 0;
- }
-
+++ /dev/null
-From a80ef99cb308904b82662deb66c5ed7a6ff59928 Mon Sep 17 00:00:00 2001
-From: Weijie Gao <weijie.gao@mediatek.com>
-Date: Wed, 3 Mar 2021 11:13:36 +0800
-Subject: [PATCH 12/21] board: mt7629: enable compression of u-boot to reduce
- the size of final image
-
-This patch makes use of the decompression mechanism implemented for mt7628
-previously to reduce the total image size. Binman will be also removed.
-
-Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
----
- Makefile | 3 +++
- arch/arm/dts/mt7629-rfb-u-boot.dtsi | 18 ------------------
- arch/arm/mach-mediatek/Kconfig | 1 -
- configs/mt7629_rfb_defconfig | 6 ++++++
- 4 files changed, 9 insertions(+), 19 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -1666,6 +1666,9 @@ u-boot-elf.lds: arch/u-boot-elf.lds prep
-
- ifeq ($(CONFIG_SPL),y)
- spl/u-boot-spl-mtk.bin: spl/u-boot-spl
-+
-+u-boot-mtk.bin: u-boot-with-spl.bin
-+ $(call if_changed,copy)
- else
- MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
- -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
---- a/arch/arm/dts/mt7629-rfb-u-boot.dtsi
-+++ b/arch/arm/dts/mt7629-rfb-u-boot.dtsi
-@@ -5,24 +5,6 @@
- * Author: Weijie Gao <weijie.gao@mediatek.com>
- */
-
--#include <config.h>
--/ {
-- binman {
-- filename = "u-boot-mtk.bin";
-- pad-byte = <0xff>;
--
--#ifdef CONFIG_SPL
-- blob {
-- filename = "spl/u-boot-spl-mtk.bin";
-- size = <CONFIG_SPL_PAD_TO>;
-- };
--
-- u-boot-img {
-- };
--#endif
-- };
--};
--
- &infracfg {
- u-boot,dm-pre-reloc;
- };
---- a/arch/arm/mach-mediatek/Kconfig
-+++ b/arch/arm/mach-mediatek/Kconfig
-@@ -36,7 +36,6 @@ config TARGET_MT7629
- bool "MediaTek MT7629 SoC"
- select CPU_V7A
- select SPL
-- select BINMAN
- help
- The MediaTek MT7629 is a ARM-based SoC with a dual-core Cortex-A7
- including DDR3, crypto engine, 3x3 11n/ac Wi-Fi, Gigabit Ethernet,
---- a/configs/mt7629_rfb_defconfig
-+++ b/configs/mt7629_rfb_defconfig
-@@ -10,7 +10,11 @@ CONFIG_SPL_TEXT_BASE=0x201000
- CONFIG_TARGET_MT7629=y
- CONFIG_SPL_SERIAL_SUPPORT=y
- CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-+CONFIG_SPL_STACK_R_ADDR=0x40800000
-+CONFIG_SPL_PAYLOAD="u-boot-lzma.img"
-+CONFIG_BUILD_TARGET="u-boot-mtk.bin"
- CONFIG_DEFAULT_DEVICE_TREE="mt7629-rfb"
-+CONFIG_SPL_IMAGE="spl/u-boot-spl-mtk.bin"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- CONFIG_BOOTDELAY=3
-@@ -18,6 +22,7 @@ CONFIG_DEFAULT_FDT_FILE="mt7629-rfb"
- CONFIG_SYS_CONSOLE_IS_IN_ENV=y
- # CONFIG_DISPLAY_BOARDINFO is not set
- CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-+CONFIG_SPL_STACK_R=y
- CONFIG_SPL_NOR_SUPPORT=y
- CONFIG_SPL_WATCHDOG_SUPPORT=y
- CONFIG_HUSH_PARSER=y
-@@ -87,4 +92,5 @@ CONFIG_USB_STORAGE=y
- CONFIG_USB_KEYBOARD=y
- CONFIG_WDT_MTK=y
- CONFIG_LZMA=y
-+CONFIG_SPL_LZMA=y
- # CONFIG_EFI_LOADER is not set
+++ /dev/null
-From acd49b1549ff52286aace5e841420aa750325f8b Mon Sep 17 00:00:00 2001
-From: Weijie Gao <weijie.gao@mediatek.com>
-Date: Wed, 3 Mar 2021 10:53:14 +0800
-Subject: [PATCH 13/21] configs: mt7622: enable debug uart for
- mt7622_rfb_defconfig
-
-Enable debug uart for mt7622_rfb_defconfig
-
-Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
----
- configs/mt7622_rfb_defconfig | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/configs/mt7622_rfb_defconfig
-+++ b/configs/mt7622_rfb_defconfig
-@@ -4,7 +4,10 @@ CONFIG_ARCH_MEDIATEK=y
- CONFIG_SYS_TEXT_BASE=0x41e00000
- CONFIG_SYS_MALLOC_F_LEN=0x4000
- CONFIG_NR_DRAM_BANKS=1
-+CONFIG_DEBUG_UART_BASE=0x11002000
-+CONFIG_DEBUG_UART_CLOCK=25000000
- CONFIG_DEFAULT_DEVICE_TREE="mt7622-rfb"
-+CONFIG_DEBUG_UART=y
- CONFIG_FIT=y
- CONFIG_DEFAULT_FDT_FILE="mt7622-rfb"
- CONFIG_LOGLEVEL=7
-From f22a055a9f589f1ec614045eba3cb0c5fd887feb Mon Sep 17 00:00:00 2001
+From d6c5309185aae3d9ecf80eae8b248522d11a6136 Mon Sep 17 00:00:00 2001
From: Weijie Gao <weijie.gao@mediatek.com>
Date: Tue, 2 Mar 2021 16:58:01 +0800
-Subject: [PATCH 14/21] drivers: mtd: add support for MediaTek SPI-NAND flash
+Subject: [PATCH 04/12] drivers: mtd: add support for MediaTek SPI-NAND flash
controller
Add mtd driver for MediaTek SPI-NAND flash controller
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
-@@ -108,6 +108,8 @@ config HBMC_AM654
+@@ -109,6 +109,8 @@ config HBMC_AM654
This is the driver for HyperBus controller on TI's AM65x and
other SoCs
source "drivers/mtd/spi/Kconfig"
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
-@@ -40,3 +40,5 @@ obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPOR
+@@ -39,3 +39,5 @@ obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPOR
obj-$(CONFIG_SPL_UBI) += ubispl/
endif
-From 0c857d4c9cd9dc8e8ebba18cf9e9b10513ccb35d Mon Sep 17 00:00:00 2001
+From b7fb0e0674db12bcf53df4b107a17c80758ee5d3 Mon Sep 17 00:00:00 2001
From: Weijie Gao <weijie.gao@mediatek.com>
Date: Wed, 3 Mar 2021 08:57:29 +0800
-Subject: [PATCH 15/21] mtd: mtk-snand: add support for SPL
+Subject: [PATCH 05/12] mtd: mtk-snand: add support for SPL
Add support to initialize SPI-NAND in SPL.
Add implementation for SPL NAND loader.
-From eaa9bc597e0bf8bcd1486ea49c8c7c070a37a8aa Mon Sep 17 00:00:00 2001
+From a26620ec83fa3077f0c261046e82091f7455736f Mon Sep 17 00:00:00 2001
From: Weijie Gao <weijie.gao@mediatek.com>
Date: Wed, 3 Mar 2021 10:11:32 +0800
-Subject: [PATCH 16/21] env: add support for generic MTD device
+Subject: [PATCH 06/12] env: add support for generic MTD device
Add an env driver for generic MTD device.
config ENV_IS_IN_NAND
bool "Environment in a NAND device"
depends on !CHAIN_OF_TRUST
-@@ -513,10 +534,16 @@ config ENV_ADDR_REDUND
+@@ -534,10 +555,16 @@ config ENV_ADDR_REDUND
Offset from the start of the device (or partition) of the redundant
environment location.
default 0x3f8000 if ARCH_ROCKCHIP && ENV_IS_IN_MMC
default 0x140000 if ARCH_ROCKCHIP && ENV_IS_IN_SPI_FLASH
default 0x88000 if ARCH_SUNXI
-@@ -560,6 +587,12 @@ config ENV_SECT_SIZE
+@@ -582,6 +609,12 @@ config ENV_SECT_SIZE
help
Size of the sector containing the environment.
ENVL_ONENAND,
--- a/tools/Makefile
+++ b/tools/Makefile
-@@ -22,6 +22,7 @@ ENVCRC-$(CONFIG_ENV_IS_EMBEDDED) = y
+@@ -41,6 +41,7 @@ ENVCRC-$(CONFIG_ENV_IS_EMBEDDED) = y
ENVCRC-$(CONFIG_ENV_IS_IN_EEPROM) = y
ENVCRC-$(CONFIG_ENV_IS_IN_FLASH) = y
ENVCRC-$(CONFIG_ENV_IS_IN_ONENAND) = y
-From 47b386259625061b376f538055a4f3fbd0ab7fef Mon Sep 17 00:00:00 2001
+From 3757223c3354b9feeffcbe916eb18eb8873bd133 Mon Sep 17 00:00:00 2001
From: Weijie Gao <weijie.gao@mediatek.com>
Date: Wed, 3 Mar 2021 10:48:53 +0800
-Subject: [PATCH 17/21] board: mt7629: add support for booting from SPI-NAND
+Subject: [PATCH 07/12] board: mt7629: add support for booting from SPI-NAND
Add support for mt7629 to boot from SPI-NAND.
Add a new defconfig for mt7629+spi-nand configuration.
-From ec0d1899b035700a657721761ff6370b940450ab Mon Sep 17 00:00:00 2001
+From 6bcd65ed47844e747ff6db066b092632f1760256 Mon Sep 17 00:00:00 2001
From: Weijie Gao <weijie.gao@mediatek.com>
Date: Wed, 3 Mar 2021 10:51:43 +0800
-Subject: [PATCH 18/21] board: mt7622: use new spi-nand driver
+Subject: [PATCH 08/12] board: mt7622: use new spi-nand driver
Enable new spi-nand driver support for mt7622_rfb_defconfig
CONFIG_CMD_PCI=y
CONFIG_CMD_SF_TEST=y
CONFIG_CMD_PING=y
-@@ -28,6 +29,10 @@ CONFIG_CLK=y
- CONFIG_DM_MMC=y
+@@ -27,6 +28,10 @@ CONFIG_SYSCON=y
+ CONFIG_CLK=y
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_MMC_MTK=y
+CONFIG_MTD=y
-From 2f7aaf3c2c127bd53d5e8bfe39e808fdd6eb99be Mon Sep 17 00:00:00 2001
+From 632f09f140610cf45da1dba25c66e9ca79a70a15 Mon Sep 17 00:00:00 2001
From: Weijie Gao <weijie.gao@mediatek.com>
Date: Wed, 3 Mar 2021 12:12:39 +0800
-Subject: [PATCH 19/21] configs: mt7629: remove unused options and add dm
+Subject: [PATCH 09/12] configs: mt7629: remove unused options and add dm
command
Remove unused bootm options
--- a/configs/mt7629_rfb_defconfig
+++ b/configs/mt7629_rfb_defconfig
-@@ -28,9 +28,14 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
+@@ -28,9 +28,14 @@ CONFIG_SPL_WATCHDOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_CMD_BOOTMENU=y
-From e5a71a0eebadfb3d75d8619a8b317eec58b2bca2 Mon Sep 17 00:00:00 2001
+From 93d7086edb0db4b05149dfea21a2a82d8f160944 Mon Sep 17 00:00:00 2001
From: Weijie Gao <weijie.gao@mediatek.com>
Date: Sat, 6 Mar 2021 16:29:33 +0800
-Subject: [PATCH 20/21] configs: mt7622: enable environment for mt7622_rfb
+Subject: [PATCH 10/12] configs: mt7622: enable environment for mt7622_rfb
Enable environment vairables for mt7622_rfb
--- a/configs/mt7622_rfb_defconfig
+++ b/configs/mt7622_rfb_defconfig
-@@ -4,6 +4,8 @@ CONFIG_ARCH_MEDIATEK=y
- CONFIG_SYS_TEXT_BASE=0x41e00000
+@@ -5,6 +5,8 @@ CONFIG_SYS_TEXT_BASE=0x41e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
+ CONFIG_DEFAULT_DEVICE_TREE="mt7622-rfb"
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0x280000
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=25000000
- CONFIG_DEFAULT_DEVICE_TREE="mt7622-rfb"
+ CONFIG_DEBUG_UART=y
@@ -21,6 +23,9 @@ CONFIG_CMD_SF_TEST=y
CONFIG_CMD_PING=y
CONFIG_CMD_SMC=y
+++ /dev/null
-From c7d1b1890880ee64786b92a1b95ba9ecb4694997 Mon Sep 17 00:00:00 2001
-From: Christian Melki <christian.melki@t2data.com>
-Date: Mon, 7 Jun 2021 11:21:15 +0200
-Subject: [PATCH] disk/part_dos.c: Fix a variable typo in
- write_mbr_partitions()
-
-This function is passed *dev not *dev_desc, so pass the right name to
-part_init().
-
-Fixes: f14c5ee5ab8b ("disk: part_dos: update partition table entries after write")
-Signed-off-by: Christian Melki <christian.melki@t2data.com>
----
- disk/part_dos.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/disk/part_dos.c
-+++ b/disk/part_dos.c
-@@ -424,7 +424,7 @@ int write_mbr_partitions(struct blk_desc
- }
-
- /* Update the partition table entries*/
-- part_init(dev_desc);
-+ part_init(dev);
-
- return 0;
- }
-From b137ca16b54c67d76714ea5a0138741959b0dc29 Mon Sep 17 00:00:00 2001
+From 12de602dc824bcb821287500fba831225cff5392 Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Mon, 13 Jul 2020 23:37:37 +0200
-Subject: [PATCH] scripts: remove dependency on swig
+Subject: [PATCH 11/12] scripts: remove dependency on swig
Don't build the libfdt tool, as it has a dependency on swig (which
OpenWrt does not ship).
--- /dev/null
+--- a/tools/Makefile
++++ b/tools/Makefile
+@@ -118,7 +118,6 @@ dumpimage-mkimage-objs := aisimage.o \
+ imximage.o \
+ imx8image.o \
+ imx8mimage.o \
+- kwbimage.o \
+ lib/md5.o \
+ lpc32xximage.o \
+ mxsimage.o \
--- a/Makefile
+++ b/Makefile
-@@ -1004,7 +1004,7 @@ quiet_cmd_pad_cat = CAT $@
+@@ -1051,7 +1051,7 @@ quiet_cmd_pad_cat = CAT $@
cmd_pad_cat = $(cmd_objcopy) && $(append) || { rm -f $@; false; }
quiet_cmd_lzma = LZMA $@
{
--- a/common/image-fit.c
+++ b/common/image-fit.c
-@@ -1970,6 +1970,51 @@ static const char *fit_get_image_type_pr
+@@ -1962,6 +1962,51 @@ static const char *fit_get_image_type_pr
return "unknown";
}
int arch, int image_type, int bootstage_id,
--- a/include/image.h
+++ b/include/image.h
-@@ -1041,6 +1041,7 @@ int fit_parse_subimage(const char *spec,
+@@ -996,6 +996,7 @@ int fit_parse_subimage(const char *spec,
ulong *addr, const char **image_name);
int fit_get_subimage_count(const void *fit, int images_noffset);
-From 26d4e2e58bf0007db74b47c783785c3305ea1fa0 Mon Sep 17 00:00:00 2001
+From afea25576fc92d562b248b783cf03564eb4521da Mon Sep 17 00:00:00 2001
From: Weijie Gao <weijie.gao@mediatek.com>
Date: Tue, 19 Jan 2021 10:58:48 +0800
-Subject: [PATCH 17/23] cmd: bootmenu: add ability to select item by shortkey
+Subject: [PATCH 12/12] cmd: bootmenu: add ability to select item by shortkey
Add ability to use shortkey to select item for bootmenu command
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
-@@ -472,6 +472,12 @@ config CMD_ENV_EXISTS
+@@ -484,6 +484,12 @@ config CMD_ENV_EXISTS
Check if a variable is defined in the environment for use in
shell scripting.
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
-@@ -329,6 +329,8 @@ const struct flash_info spi_nor_ids[] =
+@@ -353,6 +353,8 @@ const struct flash_info spi_nor_ids[] =
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
{ INFO("w25q256", 0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
--- a/configs/mt7623n_bpir2_defconfig
+++ b/configs/mt7623n_bpir2_defconfig
-@@ -4,53 +4,137 @@ CONFIG_ARCH_MEDIATEK=y
+@@ -4,52 +4,137 @@ CONFIG_ARCH_MEDIATEK=y
CONFIG_SYS_TEXT_BASE=0x81e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x100000
+-CONFIG_DEFAULT_DEVICE_TREE="mt7623n-bananapi-bpi-r2"
CONFIG_TARGET_MT7623=y
- CONFIG_DEFAULT_DEVICE_TREE="mt7623n-bananapi-bpi-r2"
++CONFIG_DEFAULT_DEVICE_TREE="mt7623n-bananapi-bpi-r2"
+CONFIG_USE_DEFAULT_ENV_FILE=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CLK=y
--CONFIG_DM_MMC=y
+CONFIG_LZMA=y
+CONFIG_MEDIATEK_ETH=y
# CONFIG_MMC_QUIRKS is not set
--- a/configs/mt7623a_unielec_u7623_02_defconfig
+++ b/configs/mt7623a_unielec_u7623_02_defconfig
-@@ -52,3 +52,12 @@ CONFIG_TIMER=y
+@@ -51,3 +51,12 @@ CONFIG_TIMER=y
CONFIG_MTK_TIMER=y
CONFIG_WDT_MTK=y
CONFIG_LZMA=y
+};
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
-@@ -1007,6 +1007,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
+@@ -1104,6 +1104,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt7622-rfb.dtb \
mt7623a-unielec-u7623-02-emmc.dtb \
mt7622-bananapi-bpi-r64.dtb \
+ mt7622-linksys-e8450-ubi.dtb \
mt7623n-bananapi-bpi-r2.dtb \
mt7629-rfb.dtb \
- mt8512-bm1-emmc.dtb \
+ mt8183-pumpkin.dtb \
--- /dev/null
+++ b/linksys_e8450_env
@@ -0,0 +1,57 @@
+};
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
-@@ -1008,6 +1008,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
+@@ -1105,6 +1105,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt7623a-unielec-u7623-02-emmc.dtb \
mt7622-bananapi-bpi-r64.dtb \
mt7622-linksys-e8450-ubi.dtb \
+ mt7622-ubnt-unifi-6-lr.dtb \
mt7623n-bananapi-bpi-r2.dtb \
mt7629-rfb.dtb \
- mt8512-bm1-emmc.dtb \
+ mt8183-pumpkin.dtb \
--- /dev/null
+++ b/ubnt_unifi-6-lr_env
@@ -0,0 +1,50 @@
DECLARE_GLOBAL_DATA_PTR;
-@@ -410,6 +411,21 @@ static int initr_onenand(void)
+@@ -416,6 +417,21 @@ static int initr_onenand(void)
}
#endif
#ifdef CONFIG_MMC
static int initr_mmc(void)
{
-@@ -697,6 +713,9 @@ static init_fnc_t init_sequence_r[] = {
+@@ -705,6 +721,9 @@ static init_fnc_t init_sequence_r[] = {
#ifdef CONFIG_CMD_ONENAND
initr_onenand,
#endif
projects / openwrt / staging / nbd.git / commitdiff