obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
-obj-$(CONFIG_SERIAL_AT91) += at91_serial.o
+obj-$(CONFIG_SERIAL_AT91) += atmel_serial.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
+++ /dev/null
-/*
- * linux/drivers/char/at91_serial.c
- *
- * Driver for Atmel AT91RM9200 Serial ports
- * Copyright (C) 2003 Rick Bronson
- *
- * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#include <linux/module.h>
-#include <linux/tty.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/clk.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/tty_flip.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-
-#include <asm/arch/at91rm9200_pdc.h>
-#include <asm/mach/serial_at91.h>
-#include <asm/arch/board.h>
-#include <asm/arch/system.h>
-#include <asm/arch/gpio.h>
-
-#include "atmel_serial.h"
-
-#if defined(CONFIG_SERIAL_AT91_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/serial_core.h>
-
-#ifdef CONFIG_SERIAL_AT91_TTYAT
-
-/* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we
- * should coexist with the 8250 driver, such as if we have an external 16C550
- * UART. */
-#define SERIAL_AT91_MAJOR 204
-#define MINOR_START 154
-#define AT91_DEVICENAME "ttyAT"
-
-#else
-
-/* Use device name ttyS, major 4, minor 64-68. This is the usual serial port
- * name, but it is legally reserved for the 8250 driver. */
-#define SERIAL_AT91_MAJOR TTY_MAJOR
-#define MINOR_START 64
-#define AT91_DEVICENAME "ttyS"
-
-#endif
-
-#define AT91_ISR_PASS_LIMIT 256
-
-#define UART_PUT_CR(port,v) writel(v, (port)->membase + AT91_US_CR)
-#define UART_GET_MR(port) readl((port)->membase + AT91_US_MR)
-#define UART_PUT_MR(port,v) writel(v, (port)->membase + AT91_US_MR)
-#define UART_PUT_IER(port,v) writel(v, (port)->membase + AT91_US_IER)
-#define UART_PUT_IDR(port,v) writel(v, (port)->membase + AT91_US_IDR)
-#define UART_GET_IMR(port) readl((port)->membase + AT91_US_IMR)
-#define UART_GET_CSR(port) readl((port)->membase + AT91_US_CSR)
-#define UART_GET_CHAR(port) readl((port)->membase + AT91_US_RHR)
-#define UART_PUT_CHAR(port,v) writel(v, (port)->membase + AT91_US_THR)
-#define UART_GET_BRGR(port) readl((port)->membase + AT91_US_BRGR)
-#define UART_PUT_BRGR(port,v) writel(v, (port)->membase + AT91_US_BRGR)
-#define UART_PUT_RTOR(port,v) writel(v, (port)->membase + AT91_US_RTOR)
-
-// #define UART_GET_CR(port) readl((port)->membase + AT91_US_CR) // is write-only
-
- /* PDC registers */
-#define UART_PUT_PTCR(port,v) writel(v, (port)->membase + AT91_PDC_PTCR)
-#define UART_GET_PTSR(port) readl((port)->membase + AT91_PDC_PTSR)
-
-#define UART_PUT_RPR(port,v) writel(v, (port)->membase + AT91_PDC_RPR)
-#define UART_GET_RPR(port) readl((port)->membase + AT91_PDC_RPR)
-#define UART_PUT_RCR(port,v) writel(v, (port)->membase + AT91_PDC_RCR)
-#define UART_PUT_RNPR(port,v) writel(v, (port)->membase + AT91_PDC_RNPR)
-#define UART_PUT_RNCR(port,v) writel(v, (port)->membase + AT91_PDC_RNCR)
-
-#define UART_PUT_TPR(port,v) writel(v, (port)->membase + AT91_PDC_TPR)
-#define UART_PUT_TCR(port,v) writel(v, (port)->membase + AT91_PDC_TCR)
-//#define UART_PUT_TNPR(port,v) writel(v, (port)->membase + AT91_PDC_TNPR)
-//#define UART_PUT_TNCR(port,v) writel(v, (port)->membase + AT91_PDC_TNCR)
-
-static int (*at91_open)(struct uart_port *);
-static void (*at91_close)(struct uart_port *);
-
-/*
- * We wrap our port structure around the generic uart_port.
- */
-struct at91_uart_port {
- struct uart_port uart; /* uart */
- struct clk *clk; /* uart clock */
- unsigned short suspended; /* is port suspended? */
-};
-
-static struct at91_uart_port at91_ports[AT91_NR_UART];
-
-#ifdef SUPPORT_SYSRQ
-static struct console at91_console;
-#endif
-
-/*
- * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
- */
-static u_int at91_tx_empty(struct uart_port *port)
-{
- return (UART_GET_CSR(port) & AT91_US_TXEMPTY) ? TIOCSER_TEMT : 0;
-}
-
-/*
- * Set state of the modem control output lines
- */
-static void at91_set_mctrl(struct uart_port *port, u_int mctrl)
-{
- unsigned int control = 0;
- unsigned int mode;
-
- if (arch_identify() == ARCH_ID_AT91RM9200) {
- /*
- * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21.
- * We need to drive the pin manually.
- */
- if (port->mapbase == AT91RM9200_BASE_US0) {
- if (mctrl & TIOCM_RTS)
- at91_set_gpio_value(AT91_PIN_PA21, 0);
- else
- at91_set_gpio_value(AT91_PIN_PA21, 1);
- }
- }
-
- if (mctrl & TIOCM_RTS)
- control |= AT91_US_RTSEN;
- else
- control |= AT91_US_RTSDIS;
-
- if (mctrl & TIOCM_DTR)
- control |= AT91_US_DTREN;
- else
- control |= AT91_US_DTRDIS;
-
- UART_PUT_CR(port, control);
-
- /* Local loopback mode? */
- mode = UART_GET_MR(port) & ~AT91_US_CHMODE;
- if (mctrl & TIOCM_LOOP)
- mode |= AT91_US_CHMODE_LOC_LOOP;
- else
- mode |= AT91_US_CHMODE_NORMAL;
- UART_PUT_MR(port, mode);
-}
-
-/*
- * Get state of the modem control input lines
- */
-static u_int at91_get_mctrl(struct uart_port *port)
-{
- unsigned int status, ret = 0;
-
- status = UART_GET_CSR(port);
-
- /*
- * The control signals are active low.
- */
- if (!(status & AT91_US_DCD))
- ret |= TIOCM_CD;
- if (!(status & AT91_US_CTS))
- ret |= TIOCM_CTS;
- if (!(status & AT91_US_DSR))
- ret |= TIOCM_DSR;
- if (!(status & AT91_US_RI))
- ret |= TIOCM_RI;
-
- return ret;
-}
-
-/*
- * Stop transmitting.
- */
-static void at91_stop_tx(struct uart_port *port)
-{
- struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
-
- UART_PUT_IDR(port, AT91_US_TXRDY);
-}
-
-/*
- * Start transmitting.
- */
-static void at91_start_tx(struct uart_port *port)
-{
- struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
-
- UART_PUT_IER(port, AT91_US_TXRDY);
-}
-
-/*
- * Stop receiving - port is in process of being closed.
- */
-static void at91_stop_rx(struct uart_port *port)
-{
- struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
-
- UART_PUT_IDR(port, AT91_US_RXRDY);
-}
-
-/*
- * Enable modem status interrupts
- */
-static void at91_enable_ms(struct uart_port *port)
-{
- UART_PUT_IER(port, AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC);
-}
-
-/*
- * Control the transmission of a break signal
- */
-static void at91_break_ctl(struct uart_port *port, int break_state)
-{
- if (break_state != 0)
- UART_PUT_CR(port, AT91_US_STTBRK); /* start break */
- else
- UART_PUT_CR(port, AT91_US_STPBRK); /* stop break */
-}
-
-/*
- * Characters received (called from interrupt handler)
- */
-static void at91_rx_chars(struct uart_port *port, struct pt_regs *regs)
-{
- struct tty_struct *tty = port->info->tty;
- unsigned int status, ch, flg;
-
- status = UART_GET_CSR(port);
- while (status & AT91_US_RXRDY) {
- ch = UART_GET_CHAR(port);
-
- port->icount.rx++;
-
- flg = TTY_NORMAL;
-
- /*
- * note that the error handling code is
- * out of the main execution path
- */
- if (unlikely(status & (AT91_US_PARE | AT91_US_FRAME | AT91_US_OVRE | AT91_US_RXBRK))) {
- UART_PUT_CR(port, AT91_US_RSTSTA); /* clear error */
- if (status & AT91_US_RXBRK) {
- status &= ~(AT91_US_PARE | AT91_US_FRAME); /* ignore side-effect */
- port->icount.brk++;
- if (uart_handle_break(port))
- goto ignore_char;
- }
- if (status & AT91_US_PARE)
- port->icount.parity++;
- if (status & AT91_US_FRAME)
- port->icount.frame++;
- if (status & AT91_US_OVRE)
- port->icount.overrun++;
-
- status &= port->read_status_mask;
-
- if (status & AT91_US_RXBRK)
- flg = TTY_BREAK;
- else if (status & AT91_US_PARE)
- flg = TTY_PARITY;
- else if (status & AT91_US_FRAME)
- flg = TTY_FRAME;
- }
-
- if (uart_handle_sysrq_char(port, ch, regs))
- goto ignore_char;
-
- uart_insert_char(port, status, AT91_US_OVRE, ch, flg);
-
- ignore_char:
- status = UART_GET_CSR(port);
- }
-
- tty_flip_buffer_push(tty);
-}
-
-/*
- * Transmit characters (called from interrupt handler)
- */
-static void at91_tx_chars(struct uart_port *port)
-{
- struct circ_buf *xmit = &port->info->xmit;
-
- if (port->x_char) {
- UART_PUT_CHAR(port, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- at91_stop_tx(port);
- return;
- }
-
- while (UART_GET_CSR(port) & AT91_US_TXRDY) {
- UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (uart_circ_empty(xmit))
- at91_stop_tx(port);
-}
-
-/*
- * Interrupt handler
- */
-static irqreturn_t at91_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct uart_port *port = dev_id;
- struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
- unsigned int status, pending, pass_counter = 0;
-
- status = UART_GET_CSR(port);
- pending = status & UART_GET_IMR(port);
- while (pending) {
- /* Interrupt receive */
- if (pending & AT91_US_RXRDY)
- at91_rx_chars(port, regs);
-
- // TODO: All reads to CSR will clear these interrupts!
- if (pending & AT91_US_RIIC) port->icount.rng++;
- if (pending & AT91_US_DSRIC) port->icount.dsr++;
- if (pending & AT91_US_DCDIC)
- uart_handle_dcd_change(port, !(status & AT91_US_DCD));
- if (pending & AT91_US_CTSIC)
- uart_handle_cts_change(port, !(status & AT91_US_CTS));
- if (pending & (AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC))
- wake_up_interruptible(&port->info->delta_msr_wait);
-
- /* Interrupt transmit */
- if (pending & AT91_US_TXRDY)
- at91_tx_chars(port);
-
- if (pass_counter++ > AT91_ISR_PASS_LIMIT)
- break;
-
- status = UART_GET_CSR(port);
- pending = status & UART_GET_IMR(port);
- }
- return IRQ_HANDLED;
-}
-
-/*
- * Perform initialization and enable port for reception
- */
-static int at91_startup(struct uart_port *port)
-{
- struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
- int retval;
-
- /*
- * Ensure that no interrupts are enabled otherwise when
- * request_irq() is called we could get stuck trying to
- * handle an unexpected interrupt
- */
- UART_PUT_IDR(port, -1);
-
- /*
- * Allocate the IRQ
- */
- retval = request_irq(port->irq, at91_interrupt, IRQF_SHARED, "at91_serial", port);
- if (retval) {
- printk("at91_serial: at91_startup - Can't get irq\n");
- return retval;
- }
-
- /*
- * If there is a specific "open" function (to register
- * control line interrupts)
- */
- if (at91_open) {
- retval = at91_open(port);
- if (retval) {
- free_irq(port->irq, port);
- return retval;
- }
- }
-
- /*
- * Finally, enable the serial port
- */
- UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX);
- UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN); /* enable xmit & rcvr */
-
- UART_PUT_IER(port, AT91_US_RXRDY); /* enable receive only */
-
- return 0;
-}
-
-/*
- * Disable the port
- */
-static void at91_shutdown(struct uart_port *port)
-{
- struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
-
- /*
- * Disable all interrupts, port and break condition.
- */
- UART_PUT_CR(port, AT91_US_RSTSTA);
- UART_PUT_IDR(port, -1);
-
- /*
- * Free the interrupt
- */
- free_irq(port->irq, port);
-
- /*
- * If there is a specific "close" function (to unregister
- * control line interrupts)
- */
- if (at91_close)
- at91_close(port);
-}
-
-/*
- * Power / Clock management.
- */
-static void at91_serial_pm(struct uart_port *port, unsigned int state, unsigned int oldstate)
-{
- struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
-
- switch (state) {
- case 0:
- /*
- * Enable the peripheral clock for this serial port.
- * This is called on uart_open() or a resume event.
- */
- clk_enable(at91_port->clk);
- break;
- case 3:
- /*
- * Disable the peripheral clock for this serial port.
- * This is called on uart_close() or a suspend event.
- */
- clk_disable(at91_port->clk);
- break;
- default:
- printk(KERN_ERR "at91_serial: unknown pm %d\n", state);
- }
-}
-
-/*
- * Change the port parameters
- */
-static void at91_set_termios(struct uart_port *port, struct termios * termios, struct termios * old)
-{
- unsigned long flags;
- unsigned int mode, imr, quot, baud;
-
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
-
- /* Get current mode register */
- mode = UART_GET_MR(port) & ~(AT91_US_CHRL | AT91_US_NBSTOP | AT91_US_PAR);
-
- /* byte size */
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- mode |= AT91_US_CHRL_5;
- break;
- case CS6:
- mode |= AT91_US_CHRL_6;
- break;
- case CS7:
- mode |= AT91_US_CHRL_7;
- break;
- default:
- mode |= AT91_US_CHRL_8;
- break;
- }
-
- /* stop bits */
- if (termios->c_cflag & CSTOPB)
- mode |= AT91_US_NBSTOP_2;
-
- /* parity */
- if (termios->c_cflag & PARENB) {
- if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */
- if (termios->c_cflag & PARODD)
- mode |= AT91_US_PAR_MARK;
- else
- mode |= AT91_US_PAR_SPACE;
- }
- else if (termios->c_cflag & PARODD)
- mode |= AT91_US_PAR_ODD;
- else
- mode |= AT91_US_PAR_EVEN;
- }
- else
- mode |= AT91_US_PAR_NONE;
-
- spin_lock_irqsave(&port->lock, flags);
-
- port->read_status_mask = AT91_US_OVRE;
- if (termios->c_iflag & INPCK)
- port->read_status_mask |= (AT91_US_FRAME | AT91_US_PARE);
- if (termios->c_iflag & (BRKINT | PARMRK))
- port->read_status_mask |= AT91_US_RXBRK;
-
- /*
- * Characters to ignore
- */
- port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= (AT91_US_FRAME | AT91_US_PARE);
- if (termios->c_iflag & IGNBRK) {
- port->ignore_status_mask |= AT91_US_RXBRK;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= AT91_US_OVRE;
- }
-
- // TODO: Ignore all characters if CREAD is set.
-
- /* update the per-port timeout */
- uart_update_timeout(port, termios->c_cflag, baud);
-
- /* disable interrupts and drain transmitter */
- imr = UART_GET_IMR(port); /* get interrupt mask */
- UART_PUT_IDR(port, -1); /* disable all interrupts */
- while (!(UART_GET_CSR(port) & AT91_US_TXEMPTY)) { barrier(); }
-
- /* disable receiver and transmitter */
- UART_PUT_CR(port, AT91_US_TXDIS | AT91_US_RXDIS);
-
- /* set the parity, stop bits and data size */
- UART_PUT_MR(port, mode);
-
- /* set the baud rate */
- UART_PUT_BRGR(port, quot);
- UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX);
- UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN);
-
- /* restore interrupts */
- UART_PUT_IER(port, imr);
-
- /* CTS flow-control and modem-status interrupts */
- if (UART_ENABLE_MS(port, termios->c_cflag))
- port->ops->enable_ms(port);
-
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-/*
- * Return string describing the specified port
- */
-static const char *at91_type(struct uart_port *port)
-{
- return (port->type == PORT_AT91) ? "AT91_SERIAL" : NULL;
-}
-
-/*
- * Release the memory region(s) being used by 'port'.
- */
-static void at91_release_port(struct uart_port *port)
-{
- struct platform_device *pdev = to_platform_device(port->dev);
- int size = pdev->resource[0].end - pdev->resource[0].start + 1;
-
- release_mem_region(port->mapbase, size);
-
- if (port->flags & UPF_IOREMAP) {
- iounmap(port->membase);
- port->membase = NULL;
- }
-}
-
-/*
- * Request the memory region(s) being used by 'port'.
- */
-static int at91_request_port(struct uart_port *port)
-{
- struct platform_device *pdev = to_platform_device(port->dev);
- int size = pdev->resource[0].end - pdev->resource[0].start + 1;
-
- if (!request_mem_region(port->mapbase, size, "at91_serial"))
- return -EBUSY;
-
- if (port->flags & UPF_IOREMAP) {
- port->membase = ioremap(port->mapbase, size);
- if (port->membase == NULL) {
- release_mem_region(port->mapbase, size);
- return -ENOMEM;
- }
- }
-
- return 0;
-}
-
-/*
- * Configure/autoconfigure the port.
- */
-static void at91_config_port(struct uart_port *port, int flags)
-{
- if (flags & UART_CONFIG_TYPE) {
- port->type = PORT_AT91;
- at91_request_port(port);
- }
-}
-
-/*
- * Verify the new serial_struct (for TIOCSSERIAL).
- */
-static int at91_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- int ret = 0;
- if (ser->type != PORT_UNKNOWN && ser->type != PORT_AT91)
- ret = -EINVAL;
- if (port->irq != ser->irq)
- ret = -EINVAL;
- if (ser->io_type != SERIAL_IO_MEM)
- ret = -EINVAL;
- if (port->uartclk / 16 != ser->baud_base)
- ret = -EINVAL;
- if ((void *)port->mapbase != ser->iomem_base)
- ret = -EINVAL;
- if (port->iobase != ser->port)
- ret = -EINVAL;
- if (ser->hub6 != 0)
- ret = -EINVAL;
- return ret;
-}
-
-static struct uart_ops at91_pops = {
- .tx_empty = at91_tx_empty,
- .set_mctrl = at91_set_mctrl,
- .get_mctrl = at91_get_mctrl,
- .stop_tx = at91_stop_tx,
- .start_tx = at91_start_tx,
- .stop_rx = at91_stop_rx,
- .enable_ms = at91_enable_ms,
- .break_ctl = at91_break_ctl,
- .startup = at91_startup,
- .shutdown = at91_shutdown,
- .set_termios = at91_set_termios,
- .type = at91_type,
- .release_port = at91_release_port,
- .request_port = at91_request_port,
- .config_port = at91_config_port,
- .verify_port = at91_verify_port,
- .pm = at91_serial_pm,
-};
-
-/*
- * Configure the port from the platform device resource info.
- */
-static void __devinit at91_init_port(struct at91_uart_port *at91_port, struct platform_device *pdev)
-{
- struct uart_port *port = &at91_port->uart;
- struct at91_uart_data *data = pdev->dev.platform_data;
-
- port->iotype = UPIO_MEM;
- port->flags = UPF_BOOT_AUTOCONF;
- port->ops = &at91_pops;
- port->fifosize = 1;
- port->line = pdev->id;
- port->dev = &pdev->dev;
-
- port->mapbase = pdev->resource[0].start;
- port->irq = pdev->resource[1].start;
-
- if (port->mapbase == AT91_VA_BASE_SYS + AT91_DBGU) /* Part of system perpherals - already mapped */
- port->membase = (void __iomem *) port->mapbase;
- else {
- port->flags |= UPF_IOREMAP;
- port->membase = NULL;
- }
-
- if (!at91_port->clk) { /* for console, the clock could already be configured */
- at91_port->clk = clk_get(&pdev->dev, "usart");
- clk_enable(at91_port->clk);
- port->uartclk = clk_get_rate(at91_port->clk);
- }
-}
-
-/*
- * Register board-specific modem-control line handlers.
- */
-void __init at91_register_uart_fns(struct at91_port_fns *fns)
-{
- if (fns->enable_ms)
- at91_pops.enable_ms = fns->enable_ms;
- if (fns->get_mctrl)
- at91_pops.get_mctrl = fns->get_mctrl;
- if (fns->set_mctrl)
- at91_pops.set_mctrl = fns->set_mctrl;
- at91_open = fns->open;
- at91_close = fns->close;
- at91_pops.pm = fns->pm;
- at91_pops.set_wake = fns->set_wake;
-}
-
-
-#ifdef CONFIG_SERIAL_AT91_CONSOLE
-static void at91_console_putchar(struct uart_port *port, int ch)
-{
- while (!(UART_GET_CSR(port) & AT91_US_TXRDY))
- barrier();
- UART_PUT_CHAR(port, ch);
-}
-
-/*
- * Interrupts are disabled on entering
- */
-static void at91_console_write(struct console *co, const char *s, u_int count)
-{
- struct uart_port *port = &at91_ports[co->index].uart;
- unsigned int status, imr;
-
- /*
- * First, save IMR and then disable interrupts
- */
- imr = UART_GET_IMR(port); /* get interrupt mask */
- UART_PUT_IDR(port, AT91_US_RXRDY | AT91_US_TXRDY);
-
- uart_console_write(port, s, count, at91_console_putchar);
-
- /*
- * Finally, wait for transmitter to become empty
- * and restore IMR
- */
- do {
- status = UART_GET_CSR(port);
- } while (!(status & AT91_US_TXRDY));
- UART_PUT_IER(port, imr); /* set interrupts back the way they were */
-}
-
-/*
- * If the port was already initialised (eg, by a boot loader), try to determine
- * the current setup.
- */
-static void __init at91_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
-{
- unsigned int mr, quot;
-
-// TODO: CR is a write-only register
-// unsigned int cr;
-//
-// cr = UART_GET_CR(port) & (AT91_US_RXEN | AT91_US_TXEN);
-// if (cr == (AT91_US_RXEN | AT91_US_TXEN)) {
-// /* ok, the port was enabled */
-// }
-
- mr = UART_GET_MR(port) & AT91_US_CHRL;
- if (mr == AT91_US_CHRL_8)
- *bits = 8;
- else
- *bits = 7;
-
- mr = UART_GET_MR(port) & AT91_US_PAR;
- if (mr == AT91_US_PAR_EVEN)
- *parity = 'e';
- else if (mr == AT91_US_PAR_ODD)
- *parity = 'o';
-
- quot = UART_GET_BRGR(port);
- *baud = port->uartclk / (16 * (quot));
-}
-
-static int __init at91_console_setup(struct console *co, char *options)
-{
- struct uart_port *port = &at91_ports[co->index].uart;
- int baud = 115200;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- if (port->membase == 0) /* Port not initialized yet - delay setup */
- return -ENODEV;
-
- UART_PUT_IDR(port, -1); /* disable interrupts */
- UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX);
- UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN);
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- else
- at91_console_get_options(port, &baud, &parity, &bits);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver at91_uart;
-
-static struct console at91_console = {
- .name = AT91_DEVICENAME,
- .write = at91_console_write,
- .device = uart_console_device,
- .setup = at91_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &at91_uart,
-};
-
-#define AT91_CONSOLE_DEVICE &at91_console
-
-/*
- * Early console initialization (before VM subsystem initialized).
- */
-static int __init at91_console_init(void)
-{
- if (at91_default_console_device) {
- add_preferred_console(AT91_DEVICENAME, at91_default_console_device->id, NULL);
- at91_init_port(&(at91_ports[at91_default_console_device->id]), at91_default_console_device);
- register_console(&at91_console);
- }
-
- return 0;
-}
-console_initcall(at91_console_init);
-
-/*
- * Late console initialization.
- */
-static int __init at91_late_console_init(void)
-{
- if (at91_default_console_device && !(at91_console.flags & CON_ENABLED))
- register_console(&at91_console);
-
- return 0;
-}
-core_initcall(at91_late_console_init);
-
-#else
-#define AT91_CONSOLE_DEVICE NULL
-#endif
-
-static struct uart_driver at91_uart = {
- .owner = THIS_MODULE,
- .driver_name = "at91_serial",
- .dev_name = AT91_DEVICENAME,
- .major = SERIAL_AT91_MAJOR,
- .minor = MINOR_START,
- .nr = AT91_NR_UART,
- .cons = AT91_CONSOLE_DEVICE,
-};
-
-#ifdef CONFIG_PM
-static int at91_serial_suspend(struct platform_device *pdev, pm_message_t state)
-{
- struct uart_port *port = platform_get_drvdata(pdev);
- struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
-
- if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
- enable_irq_wake(port->irq);
- else {
- disable_irq_wake(port->irq);
- uart_suspend_port(&at91_uart, port);
- at91_port->suspended = 1;
- }
-
- return 0;
-}
-
-static int at91_serial_resume(struct platform_device *pdev)
-{
- struct uart_port *port = platform_get_drvdata(pdev);
- struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
-
- if (at91_port->suspended) {
- uart_resume_port(&at91_uart, port);
- at91_port->suspended = 0;
- }
-
- return 0;
-}
-#else
-#define at91_serial_suspend NULL
-#define at91_serial_resume NULL
-#endif
-
-static int __devinit at91_serial_probe(struct platform_device *pdev)
-{
- struct at91_uart_port *port;
- int ret;
-
- port = &at91_ports[pdev->id];
- at91_init_port(port, pdev);
-
- ret = uart_add_one_port(&at91_uart, &port->uart);
- if (!ret) {
- device_init_wakeup(&pdev->dev, 1);
- platform_set_drvdata(pdev, port);
- }
-
- return ret;
-}
-
-static int __devexit at91_serial_remove(struct platform_device *pdev)
-{
- struct uart_port *port = platform_get_drvdata(pdev);
- struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
- int ret = 0;
-
- clk_disable(at91_port->clk);
- clk_put(at91_port->clk);
-
- device_init_wakeup(&pdev->dev, 0);
- platform_set_drvdata(pdev, NULL);
-
- if (port) {
- ret = uart_remove_one_port(&at91_uart, port);
- kfree(port);
- }
-
- return ret;
-}
-
-static struct platform_driver at91_serial_driver = {
- .probe = at91_serial_probe,
- .remove = __devexit_p(at91_serial_remove),
- .suspend = at91_serial_suspend,
- .resume = at91_serial_resume,
- .driver = {
- .name = "at91_usart",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init at91_serial_init(void)
-{
- int ret;
-
- ret = uart_register_driver(&at91_uart);
- if (ret)
- return ret;
-
- ret = platform_driver_register(&at91_serial_driver);
- if (ret)
- uart_unregister_driver(&at91_uart);
-
- return ret;
-}
-
-static void __exit at91_serial_exit(void)
-{
- platform_driver_unregister(&at91_serial_driver);
- uart_unregister_driver(&at91_uart);
-}
-
-module_init(at91_serial_init);
-module_exit(at91_serial_exit);
-
-MODULE_AUTHOR("Rick Bronson");
-MODULE_DESCRIPTION("AT91 generic serial port driver");
-MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * linux/drivers/char/at91_serial.c
+ *
+ * Driver for Atmel AT91RM9200 Serial ports
+ * Copyright (C) 2003 Rick Bronson
+ *
+ * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/tty_flip.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/at91rm9200_pdc.h>
+#include <asm/mach/serial_at91.h>
+#include <asm/arch/board.h>
+#include <asm/arch/system.h>
+#include <asm/arch/gpio.h>
+
+#include "atmel_serial.h"
+
+#if defined(CONFIG_SERIAL_AT91_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#ifdef CONFIG_SERIAL_AT91_TTYAT
+
+/* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we
+ * should coexist with the 8250 driver, such as if we have an external 16C550
+ * UART. */
+#define SERIAL_AT91_MAJOR 204
+#define MINOR_START 154
+#define AT91_DEVICENAME "ttyAT"
+
+#else
+
+/* Use device name ttyS, major 4, minor 64-68. This is the usual serial port
+ * name, but it is legally reserved for the 8250 driver. */
+#define SERIAL_AT91_MAJOR TTY_MAJOR
+#define MINOR_START 64
+#define AT91_DEVICENAME "ttyS"
+
+#endif
+
+#define AT91_ISR_PASS_LIMIT 256
+
+#define UART_PUT_CR(port,v) writel(v, (port)->membase + AT91_US_CR)
+#define UART_GET_MR(port) readl((port)->membase + AT91_US_MR)
+#define UART_PUT_MR(port,v) writel(v, (port)->membase + AT91_US_MR)
+#define UART_PUT_IER(port,v) writel(v, (port)->membase + AT91_US_IER)
+#define UART_PUT_IDR(port,v) writel(v, (port)->membase + AT91_US_IDR)
+#define UART_GET_IMR(port) readl((port)->membase + AT91_US_IMR)
+#define UART_GET_CSR(port) readl((port)->membase + AT91_US_CSR)
+#define UART_GET_CHAR(port) readl((port)->membase + AT91_US_RHR)
+#define UART_PUT_CHAR(port,v) writel(v, (port)->membase + AT91_US_THR)
+#define UART_GET_BRGR(port) readl((port)->membase + AT91_US_BRGR)
+#define UART_PUT_BRGR(port,v) writel(v, (port)->membase + AT91_US_BRGR)
+#define UART_PUT_RTOR(port,v) writel(v, (port)->membase + AT91_US_RTOR)
+
+// #define UART_GET_CR(port) readl((port)->membase + AT91_US_CR) // is write-only
+
+ /* PDC registers */
+#define UART_PUT_PTCR(port,v) writel(v, (port)->membase + AT91_PDC_PTCR)
+#define UART_GET_PTSR(port) readl((port)->membase + AT91_PDC_PTSR)
+
+#define UART_PUT_RPR(port,v) writel(v, (port)->membase + AT91_PDC_RPR)
+#define UART_GET_RPR(port) readl((port)->membase + AT91_PDC_RPR)
+#define UART_PUT_RCR(port,v) writel(v, (port)->membase + AT91_PDC_RCR)
+#define UART_PUT_RNPR(port,v) writel(v, (port)->membase + AT91_PDC_RNPR)
+#define UART_PUT_RNCR(port,v) writel(v, (port)->membase + AT91_PDC_RNCR)
+
+#define UART_PUT_TPR(port,v) writel(v, (port)->membase + AT91_PDC_TPR)
+#define UART_PUT_TCR(port,v) writel(v, (port)->membase + AT91_PDC_TCR)
+//#define UART_PUT_TNPR(port,v) writel(v, (port)->membase + AT91_PDC_TNPR)
+//#define UART_PUT_TNCR(port,v) writel(v, (port)->membase + AT91_PDC_TNCR)
+
+static int (*at91_open)(struct uart_port *);
+static void (*at91_close)(struct uart_port *);
+
+/*
+ * We wrap our port structure around the generic uart_port.
+ */
+struct at91_uart_port {
+ struct uart_port uart; /* uart */
+ struct clk *clk; /* uart clock */
+ unsigned short suspended; /* is port suspended? */
+};
+
+static struct at91_uart_port at91_ports[AT91_NR_UART];
+
+#ifdef SUPPORT_SYSRQ
+static struct console at91_console;
+#endif
+
+/*
+ * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
+ */
+static u_int at91_tx_empty(struct uart_port *port)
+{
+ return (UART_GET_CSR(port) & AT91_US_TXEMPTY) ? TIOCSER_TEMT : 0;
+}
+
+/*
+ * Set state of the modem control output lines
+ */
+static void at91_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+ unsigned int control = 0;
+ unsigned int mode;
+
+ if (arch_identify() == ARCH_ID_AT91RM9200) {
+ /*
+ * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21.
+ * We need to drive the pin manually.
+ */
+ if (port->mapbase == AT91RM9200_BASE_US0) {
+ if (mctrl & TIOCM_RTS)
+ at91_set_gpio_value(AT91_PIN_PA21, 0);
+ else
+ at91_set_gpio_value(AT91_PIN_PA21, 1);
+ }
+ }
+
+ if (mctrl & TIOCM_RTS)
+ control |= AT91_US_RTSEN;
+ else
+ control |= AT91_US_RTSDIS;
+
+ if (mctrl & TIOCM_DTR)
+ control |= AT91_US_DTREN;
+ else
+ control |= AT91_US_DTRDIS;
+
+ UART_PUT_CR(port, control);
+
+ /* Local loopback mode? */
+ mode = UART_GET_MR(port) & ~AT91_US_CHMODE;
+ if (mctrl & TIOCM_LOOP)
+ mode |= AT91_US_CHMODE_LOC_LOOP;
+ else
+ mode |= AT91_US_CHMODE_NORMAL;
+ UART_PUT_MR(port, mode);
+}
+
+/*
+ * Get state of the modem control input lines
+ */
+static u_int at91_get_mctrl(struct uart_port *port)
+{
+ unsigned int status, ret = 0;
+
+ status = UART_GET_CSR(port);
+
+ /*
+ * The control signals are active low.
+ */
+ if (!(status & AT91_US_DCD))
+ ret |= TIOCM_CD;
+ if (!(status & AT91_US_CTS))
+ ret |= TIOCM_CTS;
+ if (!(status & AT91_US_DSR))
+ ret |= TIOCM_DSR;
+ if (!(status & AT91_US_RI))
+ ret |= TIOCM_RI;
+
+ return ret;
+}
+
+/*
+ * Stop transmitting.
+ */
+static void at91_stop_tx(struct uart_port *port)
+{
+ struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
+
+ UART_PUT_IDR(port, AT91_US_TXRDY);
+}
+
+/*
+ * Start transmitting.
+ */
+static void at91_start_tx(struct uart_port *port)
+{
+ struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
+
+ UART_PUT_IER(port, AT91_US_TXRDY);
+}
+
+/*
+ * Stop receiving - port is in process of being closed.
+ */
+static void at91_stop_rx(struct uart_port *port)
+{
+ struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
+
+ UART_PUT_IDR(port, AT91_US_RXRDY);
+}
+
+/*
+ * Enable modem status interrupts
+ */
+static void at91_enable_ms(struct uart_port *port)
+{
+ UART_PUT_IER(port, AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC);
+}
+
+/*
+ * Control the transmission of a break signal
+ */
+static void at91_break_ctl(struct uart_port *port, int break_state)
+{
+ if (break_state != 0)
+ UART_PUT_CR(port, AT91_US_STTBRK); /* start break */
+ else
+ UART_PUT_CR(port, AT91_US_STPBRK); /* stop break */
+}
+
+/*
+ * Characters received (called from interrupt handler)
+ */
+static void at91_rx_chars(struct uart_port *port, struct pt_regs *regs)
+{
+ struct tty_struct *tty = port->info->tty;
+ unsigned int status, ch, flg;
+
+ status = UART_GET_CSR(port);
+ while (status & AT91_US_RXRDY) {
+ ch = UART_GET_CHAR(port);
+
+ port->icount.rx++;
+
+ flg = TTY_NORMAL;
+
+ /*
+ * note that the error handling code is
+ * out of the main execution path
+ */
+ if (unlikely(status & (AT91_US_PARE | AT91_US_FRAME | AT91_US_OVRE | AT91_US_RXBRK))) {
+ UART_PUT_CR(port, AT91_US_RSTSTA); /* clear error */
+ if (status & AT91_US_RXBRK) {
+ status &= ~(AT91_US_PARE | AT91_US_FRAME); /* ignore side-effect */
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ goto ignore_char;
+ }
+ if (status & AT91_US_PARE)
+ port->icount.parity++;
+ if (status & AT91_US_FRAME)
+ port->icount.frame++;
+ if (status & AT91_US_OVRE)
+ port->icount.overrun++;
+
+ status &= port->read_status_mask;
+
+ if (status & AT91_US_RXBRK)
+ flg = TTY_BREAK;
+ else if (status & AT91_US_PARE)
+ flg = TTY_PARITY;
+ else if (status & AT91_US_FRAME)
+ flg = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(port, ch, regs))
+ goto ignore_char;
+
+ uart_insert_char(port, status, AT91_US_OVRE, ch, flg);
+
+ ignore_char:
+ status = UART_GET_CSR(port);
+ }
+
+ tty_flip_buffer_push(tty);
+}
+
+/*
+ * Transmit characters (called from interrupt handler)
+ */
+static void at91_tx_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+
+ if (port->x_char) {
+ UART_PUT_CHAR(port, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ at91_stop_tx(port);
+ return;
+ }
+
+ while (UART_GET_CSR(port) & AT91_US_TXRDY) {
+ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ at91_stop_tx(port);
+}
+
+/*
+ * Interrupt handler
+ */
+static irqreturn_t at91_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_port *port = dev_id;
+ struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
+ unsigned int status, pending, pass_counter = 0;
+
+ status = UART_GET_CSR(port);
+ pending = status & UART_GET_IMR(port);
+ while (pending) {
+ /* Interrupt receive */
+ if (pending & AT91_US_RXRDY)
+ at91_rx_chars(port, regs);
+
+ // TODO: All reads to CSR will clear these interrupts!
+ if (pending & AT91_US_RIIC) port->icount.rng++;
+ if (pending & AT91_US_DSRIC) port->icount.dsr++;
+ if (pending & AT91_US_DCDIC)
+ uart_handle_dcd_change(port, !(status & AT91_US_DCD));
+ if (pending & AT91_US_CTSIC)
+ uart_handle_cts_change(port, !(status & AT91_US_CTS));
+ if (pending & (AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC))
+ wake_up_interruptible(&port->info->delta_msr_wait);
+
+ /* Interrupt transmit */
+ if (pending & AT91_US_TXRDY)
+ at91_tx_chars(port);
+
+ if (pass_counter++ > AT91_ISR_PASS_LIMIT)
+ break;
+
+ status = UART_GET_CSR(port);
+ pending = status & UART_GET_IMR(port);
+ }
+ return IRQ_HANDLED;
+}
+
+/*
+ * Perform initialization and enable port for reception
+ */
+static int at91_startup(struct uart_port *port)
+{
+ struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
+ int retval;
+
+ /*
+ * Ensure that no interrupts are enabled otherwise when
+ * request_irq() is called we could get stuck trying to
+ * handle an unexpected interrupt
+ */
+ UART_PUT_IDR(port, -1);
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(port->irq, at91_interrupt, IRQF_SHARED, "at91_serial", port);
+ if (retval) {
+ printk("at91_serial: at91_startup - Can't get irq\n");
+ return retval;
+ }
+
+ /*
+ * If there is a specific "open" function (to register
+ * control line interrupts)
+ */
+ if (at91_open) {
+ retval = at91_open(port);
+ if (retval) {
+ free_irq(port->irq, port);
+ return retval;
+ }
+ }
+
+ /*
+ * Finally, enable the serial port
+ */
+ UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX);
+ UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN); /* enable xmit & rcvr */
+
+ UART_PUT_IER(port, AT91_US_RXRDY); /* enable receive only */
+
+ return 0;
+}
+
+/*
+ * Disable the port
+ */
+static void at91_shutdown(struct uart_port *port)
+{
+ struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
+
+ /*
+ * Disable all interrupts, port and break condition.
+ */
+ UART_PUT_CR(port, AT91_US_RSTSTA);
+ UART_PUT_IDR(port, -1);
+
+ /*
+ * Free the interrupt
+ */
+ free_irq(port->irq, port);
+
+ /*
+ * If there is a specific "close" function (to unregister
+ * control line interrupts)
+ */
+ if (at91_close)
+ at91_close(port);
+}
+
+/*
+ * Power / Clock management.
+ */
+static void at91_serial_pm(struct uart_port *port, unsigned int state, unsigned int oldstate)
+{
+ struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
+
+ switch (state) {
+ case 0:
+ /*
+ * Enable the peripheral clock for this serial port.
+ * This is called on uart_open() or a resume event.
+ */
+ clk_enable(at91_port->clk);
+ break;
+ case 3:
+ /*
+ * Disable the peripheral clock for this serial port.
+ * This is called on uart_close() or a suspend event.
+ */
+ clk_disable(at91_port->clk);
+ break;
+ default:
+ printk(KERN_ERR "at91_serial: unknown pm %d\n", state);
+ }
+}
+
+/*
+ * Change the port parameters
+ */
+static void at91_set_termios(struct uart_port *port, struct termios * termios, struct termios * old)
+{
+ unsigned long flags;
+ unsigned int mode, imr, quot, baud;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ /* Get current mode register */
+ mode = UART_GET_MR(port) & ~(AT91_US_CHRL | AT91_US_NBSTOP | AT91_US_PAR);
+
+ /* byte size */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ mode |= AT91_US_CHRL_5;
+ break;
+ case CS6:
+ mode |= AT91_US_CHRL_6;
+ break;
+ case CS7:
+ mode |= AT91_US_CHRL_7;
+ break;
+ default:
+ mode |= AT91_US_CHRL_8;
+ break;
+ }
+
+ /* stop bits */
+ if (termios->c_cflag & CSTOPB)
+ mode |= AT91_US_NBSTOP_2;
+
+ /* parity */
+ if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */
+ if (termios->c_cflag & PARODD)
+ mode |= AT91_US_PAR_MARK;
+ else
+ mode |= AT91_US_PAR_SPACE;
+ }
+ else if (termios->c_cflag & PARODD)
+ mode |= AT91_US_PAR_ODD;
+ else
+ mode |= AT91_US_PAR_EVEN;
+ }
+ else
+ mode |= AT91_US_PAR_NONE;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ port->read_status_mask = AT91_US_OVRE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= (AT91_US_FRAME | AT91_US_PARE);
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= AT91_US_RXBRK;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= (AT91_US_FRAME | AT91_US_PARE);
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= AT91_US_RXBRK;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= AT91_US_OVRE;
+ }
+
+ // TODO: Ignore all characters if CREAD is set.
+
+ /* update the per-port timeout */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /* disable interrupts and drain transmitter */
+ imr = UART_GET_IMR(port); /* get interrupt mask */
+ UART_PUT_IDR(port, -1); /* disable all interrupts */
+ while (!(UART_GET_CSR(port) & AT91_US_TXEMPTY)) { barrier(); }
+
+ /* disable receiver and transmitter */
+ UART_PUT_CR(port, AT91_US_TXDIS | AT91_US_RXDIS);
+
+ /* set the parity, stop bits and data size */
+ UART_PUT_MR(port, mode);
+
+ /* set the baud rate */
+ UART_PUT_BRGR(port, quot);
+ UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX);
+ UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN);
+
+ /* restore interrupts */
+ UART_PUT_IER(port, imr);
+
+ /* CTS flow-control and modem-status interrupts */
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ port->ops->enable_ms(port);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * Return string describing the specified port
+ */
+static const char *at91_type(struct uart_port *port)
+{
+ return (port->type == PORT_AT91) ? "AT91_SERIAL" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'.
+ */
+static void at91_release_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ int size = pdev->resource[0].end - pdev->resource[0].start + 1;
+
+ release_mem_region(port->mapbase, size);
+
+ if (port->flags & UPF_IOREMAP) {
+ iounmap(port->membase);
+ port->membase = NULL;
+ }
+}
+
+/*
+ * Request the memory region(s) being used by 'port'.
+ */
+static int at91_request_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ int size = pdev->resource[0].end - pdev->resource[0].start + 1;
+
+ if (!request_mem_region(port->mapbase, size, "at91_serial"))
+ return -EBUSY;
+
+ if (port->flags & UPF_IOREMAP) {
+ port->membase = ioremap(port->mapbase, size);
+ if (port->membase == NULL) {
+ release_mem_region(port->mapbase, size);
+ return -ENOMEM;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void at91_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_AT91;
+ at91_request_port(port);
+ }
+}
+
+/*
+ * Verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int at91_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_AT91)
+ ret = -EINVAL;
+ if (port->irq != ser->irq)
+ ret = -EINVAL;
+ if (ser->io_type != SERIAL_IO_MEM)
+ ret = -EINVAL;
+ if (port->uartclk / 16 != ser->baud_base)
+ ret = -EINVAL;
+ if ((void *)port->mapbase != ser->iomem_base)
+ ret = -EINVAL;
+ if (port->iobase != ser->port)
+ ret = -EINVAL;
+ if (ser->hub6 != 0)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops at91_pops = {
+ .tx_empty = at91_tx_empty,
+ .set_mctrl = at91_set_mctrl,
+ .get_mctrl = at91_get_mctrl,
+ .stop_tx = at91_stop_tx,
+ .start_tx = at91_start_tx,
+ .stop_rx = at91_stop_rx,
+ .enable_ms = at91_enable_ms,
+ .break_ctl = at91_break_ctl,
+ .startup = at91_startup,
+ .shutdown = at91_shutdown,
+ .set_termios = at91_set_termios,
+ .type = at91_type,
+ .release_port = at91_release_port,
+ .request_port = at91_request_port,
+ .config_port = at91_config_port,
+ .verify_port = at91_verify_port,
+ .pm = at91_serial_pm,
+};
+
+/*
+ * Configure the port from the platform device resource info.
+ */
+static void __devinit at91_init_port(struct at91_uart_port *at91_port, struct platform_device *pdev)
+{
+ struct uart_port *port = &at91_port->uart;
+ struct at91_uart_data *data = pdev->dev.platform_data;
+
+ port->iotype = UPIO_MEM;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->ops = &at91_pops;
+ port->fifosize = 1;
+ port->line = pdev->id;
+ port->dev = &pdev->dev;
+
+ port->mapbase = pdev->resource[0].start;
+ port->irq = pdev->resource[1].start;
+
+ if (port->mapbase == AT91_VA_BASE_SYS + AT91_DBGU) /* Part of system perpherals - already mapped */
+ port->membase = (void __iomem *) port->mapbase;
+ else {
+ port->flags |= UPF_IOREMAP;
+ port->membase = NULL;
+ }
+
+ if (!at91_port->clk) { /* for console, the clock could already be configured */
+ at91_port->clk = clk_get(&pdev->dev, "usart");
+ clk_enable(at91_port->clk);
+ port->uartclk = clk_get_rate(at91_port->clk);
+ }
+}
+
+/*
+ * Register board-specific modem-control line handlers.
+ */
+void __init at91_register_uart_fns(struct at91_port_fns *fns)
+{
+ if (fns->enable_ms)
+ at91_pops.enable_ms = fns->enable_ms;
+ if (fns->get_mctrl)
+ at91_pops.get_mctrl = fns->get_mctrl;
+ if (fns->set_mctrl)
+ at91_pops.set_mctrl = fns->set_mctrl;
+ at91_open = fns->open;
+ at91_close = fns->close;
+ at91_pops.pm = fns->pm;
+ at91_pops.set_wake = fns->set_wake;
+}
+
+
+#ifdef CONFIG_SERIAL_AT91_CONSOLE
+static void at91_console_putchar(struct uart_port *port, int ch)
+{
+ while (!(UART_GET_CSR(port) & AT91_US_TXRDY))
+ barrier();
+ UART_PUT_CHAR(port, ch);
+}
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void at91_console_write(struct console *co, const char *s, u_int count)
+{
+ struct uart_port *port = &at91_ports[co->index].uart;
+ unsigned int status, imr;
+
+ /*
+ * First, save IMR and then disable interrupts
+ */
+ imr = UART_GET_IMR(port); /* get interrupt mask */
+ UART_PUT_IDR(port, AT91_US_RXRDY | AT91_US_TXRDY);
+
+ uart_console_write(port, s, count, at91_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore IMR
+ */
+ do {
+ status = UART_GET_CSR(port);
+ } while (!(status & AT91_US_TXRDY));
+ UART_PUT_IER(port, imr); /* set interrupts back the way they were */
+}
+
+/*
+ * If the port was already initialised (eg, by a boot loader), try to determine
+ * the current setup.
+ */
+static void __init at91_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
+{
+ unsigned int mr, quot;
+
+// TODO: CR is a write-only register
+// unsigned int cr;
+//
+// cr = UART_GET_CR(port) & (AT91_US_RXEN | AT91_US_TXEN);
+// if (cr == (AT91_US_RXEN | AT91_US_TXEN)) {
+// /* ok, the port was enabled */
+// }
+
+ mr = UART_GET_MR(port) & AT91_US_CHRL;
+ if (mr == AT91_US_CHRL_8)
+ *bits = 8;
+ else
+ *bits = 7;
+
+ mr = UART_GET_MR(port) & AT91_US_PAR;
+ if (mr == AT91_US_PAR_EVEN)
+ *parity = 'e';
+ else if (mr == AT91_US_PAR_ODD)
+ *parity = 'o';
+
+ quot = UART_GET_BRGR(port);
+ *baud = port->uartclk / (16 * (quot));
+}
+
+static int __init at91_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port = &at91_ports[co->index].uart;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (port->membase == 0) /* Port not initialized yet - delay setup */
+ return -ENODEV;
+
+ UART_PUT_IDR(port, -1); /* disable interrupts */
+ UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX);
+ UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ at91_console_get_options(port, &baud, &parity, &bits);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver at91_uart;
+
+static struct console at91_console = {
+ .name = AT91_DEVICENAME,
+ .write = at91_console_write,
+ .device = uart_console_device,
+ .setup = at91_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &at91_uart,
+};
+
+#define AT91_CONSOLE_DEVICE &at91_console
+
+/*
+ * Early console initialization (before VM subsystem initialized).
+ */
+static int __init at91_console_init(void)
+{
+ if (at91_default_console_device) {
+ add_preferred_console(AT91_DEVICENAME, at91_default_console_device->id, NULL);
+ at91_init_port(&(at91_ports[at91_default_console_device->id]), at91_default_console_device);
+ register_console(&at91_console);
+ }
+
+ return 0;
+}
+console_initcall(at91_console_init);
+
+/*
+ * Late console initialization.
+ */
+static int __init at91_late_console_init(void)
+{
+ if (at91_default_console_device && !(at91_console.flags & CON_ENABLED))
+ register_console(&at91_console);
+
+ return 0;
+}
+core_initcall(at91_late_console_init);
+
+#else
+#define AT91_CONSOLE_DEVICE NULL
+#endif
+
+static struct uart_driver at91_uart = {
+ .owner = THIS_MODULE,
+ .driver_name = "at91_serial",
+ .dev_name = AT91_DEVICENAME,
+ .major = SERIAL_AT91_MAJOR,
+ .minor = MINOR_START,
+ .nr = AT91_NR_UART,
+ .cons = AT91_CONSOLE_DEVICE,
+};
+
+#ifdef CONFIG_PM
+static int at91_serial_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
+
+ if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
+ enable_irq_wake(port->irq);
+ else {
+ disable_irq_wake(port->irq);
+ uart_suspend_port(&at91_uart, port);
+ at91_port->suspended = 1;
+ }
+
+ return 0;
+}
+
+static int at91_serial_resume(struct platform_device *pdev)
+{
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
+
+ if (at91_port->suspended) {
+ uart_resume_port(&at91_uart, port);
+ at91_port->suspended = 0;
+ }
+
+ return 0;
+}
+#else
+#define at91_serial_suspend NULL
+#define at91_serial_resume NULL
+#endif
+
+static int __devinit at91_serial_probe(struct platform_device *pdev)
+{
+ struct at91_uart_port *port;
+ int ret;
+
+ port = &at91_ports[pdev->id];
+ at91_init_port(port, pdev);
+
+ ret = uart_add_one_port(&at91_uart, &port->uart);
+ if (!ret) {
+ device_init_wakeup(&pdev->dev, 1);
+ platform_set_drvdata(pdev, port);
+ }
+
+ return ret;
+}
+
+static int __devexit at91_serial_remove(struct platform_device *pdev)
+{
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct at91_uart_port *at91_port = (struct at91_uart_port *) port;
+ int ret = 0;
+
+ clk_disable(at91_port->clk);
+ clk_put(at91_port->clk);
+
+ device_init_wakeup(&pdev->dev, 0);
+ platform_set_drvdata(pdev, NULL);
+
+ if (port) {
+ ret = uart_remove_one_port(&at91_uart, port);
+ kfree(port);
+ }
+
+ return ret;
+}
+
+static struct platform_driver at91_serial_driver = {
+ .probe = at91_serial_probe,
+ .remove = __devexit_p(at91_serial_remove),
+ .suspend = at91_serial_suspend,
+ .resume = at91_serial_resume,
+ .driver = {
+ .name = "at91_usart",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init at91_serial_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&at91_uart);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&at91_serial_driver);
+ if (ret)
+ uart_unregister_driver(&at91_uart);
+
+ return ret;
+}
+
+static void __exit at91_serial_exit(void)
+{
+ platform_driver_unregister(&at91_serial_driver);
+ uart_unregister_driver(&at91_uart);
+}
+
+module_init(at91_serial_init);
+module_exit(at91_serial_exit);
+
+MODULE_AUTHOR("Rick Bronson");
+MODULE_DESCRIPTION("AT91 generic serial port driver");
+MODULE_LICENSE("GPL");
projects / openwrt / staging / blogic.git / commitdiff