ipq806x: Revert "ipq806x: swap lan leds for Meraki MR52"

This reverts commit ec8f647d168fa8f3b1eedd9b5fe665f793f3a659, as with the
current kernel version, the change actually causes the same bug it once
may have fixed -- that is, the leds are now again reversed.

I suspect this was due to a switch to a newer kernel version between when
the patch was submitted and now reversing the order of the interfaces, so
that eth0 / the LAN interface is also the interface used for PoE, and eth1
/ the WAN interface is the non-PoE interface.

Signed-off-by: Rafal Boni <rafal.boni@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16779
Signed-off-by: Robert Marko <robimarko@gmail.com>

diff --git a/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-mr52.dts b/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-mr52.dts
index 0d3230e6de99223fc0e6fe6466ce6102283a3072..97b280e2015e81a05703d3ecbfe0c60b84095fff 100644 (file)
--- a/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-mr52.dts
+++ b/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-mr52.dts
@@ -48,12 +48,12 @@
 
                lan1_green {
                        label = "green:lan1";
-                       gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+                       gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
                };
 
                lan2_green {
                        label = "green:lan2";
-                       gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+                       gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
                };
 
                led_active: active {
@@ -63,12 +63,12 @@
 
                lan1_orange {
                        label = "orange:lan1";
-                       gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
+                       gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
                };
 
                lan2_orange {
                        label = "orange:lan2";
-                       gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
+                       gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
                };
        };
 };