+++ /dev/null
-CONFIG_ADVISE_SYSCALLS=y
-# CONFIG_AHCI_SUNXI is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_ARCH_AXXIA is not set
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=416
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_643719=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_LPAE=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PMU=y
-CONFIG_ARM_PSCI=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-# CONFIG_ATA_SFF is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_AXP20X_POWER=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_BINFMT_MISC=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BOUNCE=y
-# CONFIG_BPF_SYSCALL is not set
-CONFIG_CACHE_L2X0=y
-CONFIG_CAN=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPACTION=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONNECTOR=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_SUN4I_SS=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_SUN4I=y
-CONFIG_DMA_SUN6I=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_DWMAC_GENERIC=y
-CONFIG_DWMAC_SUNXI=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ELF_CORE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-# CONFIG_F2FS_CHECK_FS is not set
-CONFIG_F2FS_FS=y
-# CONFIG_F2FS_FS_SECURITY is not set
-CONFIG_F2FS_FS_XATTR=y
-CONFIG_F2FS_STAT_FS=y
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_LITTLE_ENDIAN=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_SIMPLE=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FRAME_WARN=2048
-CONFIG_FREEZER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_RCU_GUP=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
-CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_HAVE_KVM_IRQFD=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_SUN6I_P2WI=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_AXP20X_PEK=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-# CONFIG_KERNEL_MODE_NEON is not set
-CONFIG_KEYBOARD_SUN4I_LRADC=y
-CONFIG_KSM=y
-CONFIG_KVM=y
-CONFIG_KVM_ARM_HOST=y
-CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
-CONFIG_KVM_MMIO=y
-CONFIG_KVM_VFIO=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIBFDT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_SUN4I=y
-CONFIG_MACH_SUN5I=y
-CONFIG_MACH_SUN6I=y
-CONFIG_MACH_SUN7I=y
-CONFIG_MACH_SUN8I=y
-CONFIG_MACH_SUN9I=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MDIO_SUN4I=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MFD_AXP20X=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SUN6I_PRCM=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_SUNXI=y
-CONFIG_MMU_NOTIFIER=y
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD is not set
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_VENDOR_ALLWINNER=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=8
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SUNXI_SID=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PARTITION_ADVANCED is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS_GENERIC is not set
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_SUN4I_USB=y
-CONFIG_PHY_SUN9I_USB=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_SUN4I_A10=y
-CONFIG_PINCTRL_SUN5I_A10S=y
-CONFIG_PINCTRL_SUN5I_A13=y
-CONFIG_PINCTRL_SUN6I_A31=y
-CONFIG_PINCTRL_SUN6I_A31S=y
-CONFIG_PINCTRL_SUN6I_A31_R=y
-CONFIG_PINCTRL_SUN7I_A20=y
-CONFIG_PINCTRL_SUN8I_A23=y
-CONFIG_PINCTRL_SUN8I_A23_R=y
-CONFIG_PINCTRL_SUN8I_A33=y
-CONFIG_PINCTRL_SUN8I_A83T=y
-CONFIG_PINCTRL_SUN8I_H3=y
-CONFIG_PINCTRL_SUN9I_A80=y
-CONFIG_PINCTRL_SUNXI_COMMON=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PROC_EVENTS=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-CONFIG_PWM_SUN4I=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-# CONFIG_RCU_BOOST is not set
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_AXP20X=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RELAY=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_SUNXI is not set
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SATA_PMP=y
-# CONFIG_SCHED_INFO is not set
-CONFIG_SCSI=y
-CONFIG_SDIO_UART=y
-CONFIG_SECURITYFS=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SND=y
-CONFIG_SND_COMPRESS_OFFLOAD=y
-CONFIG_SND_JACK=y
-CONFIG_SND_PCM=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_USB is not set
-CONFIG_SOUND=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_SUN4I=y
-CONFIG_SPI_SUN6I=y
-CONFIG_SRCU=y
-# CONFIG_STAGING is not set
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-CONFIG_STRICT_DEVMEM=y
-# CONFIG_SUN4I_EMAC is not set
-CONFIG_SUN4I_TIMER=y
-CONFIG_SUN5I_HSTIMER=y
-CONFIG_SUNXI_RSB=y
-CONFIG_SUNXI_SRAM=y
-CONFIG_SUNXI_WATCHDOG=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-CONFIG_SWIOTLB=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TOUCHSCREEN_PROPERTIES=y
-CONFIG_TOUCHSCREEN_SUN4I=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-# CONFIG_USB_ETH is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USERIO=y
-CONFIG_USE_OF=y
-CONFIG_VDSO=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VHOST=y
-CONFIG_VHOST_NET=y
-CONFIG_VHOST_RING=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
-From 6d3a47c29186aa8d26ff05a6209c94291ace0696 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Sat, 5 Dec 2015 21:16:42 +0800
-Subject: [PATCH] clk: sunxi: Add DRAM gates support for sun4i-a10
-
-The A10/A20 share the same set of DRAM clock gates, which controls
-direct memory access for some peripherals.
-
-On the A10, bit 15 controls the system's DRAM clock output (possibly
-to the DRAM chips), which we need to keep on.
-
-On the A20 this has been moved to the DRAM controller, becoming a no-op.
-However it is still listed in the user manual, so add it anyway.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
- drivers/clk/sunxi/clk-simple-gates.c | 12 ++++++++++++
- 2 files changed, 13 insertions(+)
-
---- a/drivers/clk/sunxi/clk-simple-gates.c
-+++ b/drivers/clk/sunxi/clk-simple-gates.c
-@@ -160,3 +160,15 @@ CLK_OF_DECLARE(sun5i_a13_ahb, "allwinner
- sun4i_a10_ahb_init);
- CLK_OF_DECLARE(sun7i_a20_ahb, "allwinner,sun7i-a20-ahb-gates-clk",
- sun4i_a10_ahb_init);
-+
-+static const int sun4i_a10_dram_critical_clocks[] __initconst = {
-+ 15, /* dram_output */
-+};
-+
-+static void __init sun4i_a10_dram_init(struct device_node *node)
-+{
-+ sunxi_simple_gates_setup(node, sun4i_a10_dram_critical_clocks,
-+ ARRAY_SIZE(sun4i_a10_dram_critical_clocks));
-+}
-+CLK_OF_DECLARE(sun4i_a10_dram, "allwinner,sun4i-a10-dram-gates-clk",
-+ sun4i_a10_dram_init);
+++ /dev/null
-From 82f8582feef4c048ee7ef0155a71c23614a7856d Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Sat, 5 Dec 2015 21:16:44 +0800
-Subject: [PATCH] ARM: dts: sun4i: Add DRAM gates
-
-The DRAM gates controls direct memory access for some peripherals.
-These peripherals include the display pipeline, so add the required
-gates to the simplefb nodes as well.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun4i-a10.dtsi | 36 ++++++++++++++++++++++++++++++++----
- 1 file changed, 32 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -66,7 +66,7 @@
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-- <&ahb_gates 44>;
-+ <&ahb_gates 44>, <&dram_gates 26>;
- status = "disabled";
- };
-
-@@ -75,7 +75,8 @@
- "simple-framebuffer";
- allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-- <&ahb_gates 44>, <&ahb_gates 46>;
-+ <&ahb_gates 44>, <&ahb_gates 46>,
-+ <&dram_gates 25>, <&dram_gates 26>;
- status = "disabled";
- };
-
-@@ -84,7 +85,8 @@
- "simple-framebuffer";
- allwinner,pipeline = "de_fe0-de_be0-lcd0";
- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
-- <&ahb_gates 46>;
-+ <&ahb_gates 46>, <&dram_gates 25>,
-+ <&dram_gates 26>;
- status = "disabled";
- };
-
-@@ -93,7 +95,8 @@
- "simple-framebuffer";
- allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
- clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
-- <&ahb_gates 44>, <&ahb_gates 46>;
-+ <&ahb_gates 44>, <&ahb_gates 46>,
-+ <&dram_gates 25>, <&dram_gates 26>;
- status = "disabled";
- };
- };
-@@ -492,6 +495,31 @@
- clock-output-names = "spi3";
- };
-
-+ dram_gates: clk@01c20100 {
-+ #clock-cells = <1>;
-+ compatible = "allwinner,sun4i-a10-dram-gates-clk";
-+ reg = <0x01c20100 0x4>;
-+ clocks = <&pll5 0>;
-+ clock-indices = <0>,
-+ <1>, <2>,
-+ <3>,
-+ <4>,
-+ <5>, <6>,
-+ <15>,
-+ <24>, <25>,
-+ <26>, <27>,
-+ <28>, <29>;
-+ clock-output-names = "dram_ve",
-+ "dram_csi0", "dram_csi1",
-+ "dram_ts",
-+ "dram_tvd",
-+ "dram_tve0", "dram_tve1",
-+ "dram_output",
-+ "dram_de_fe1", "dram_de_fe0",
-+ "dram_de_be0", "dram_de_be1",
-+ "dram_de_mp", "dram_ace";
-+ };
-+
- codec_clk: clk@01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
+++ /dev/null
-From 0b4bf5a5200b9ac5ddf545665f171feb5594677d Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Sat, 5 Dec 2015 21:16:46 +0800
-Subject: [PATCH] ARM: dts: sun7i: Add DRAM gates
-
-The DRAM gates controls direct memory access for some peripherals.
-These peripherals include the display pipeline, so add the required
-gates to the simplefb nodes as well.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 32 +++++++++++++++++++++++++++++---
- 1 file changed, 29 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -68,7 +68,7 @@
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-- <&ahb_gates 44>;
-+ <&ahb_gates 44>, <&dram_gates 26>;
- status = "disabled";
- };
-
-@@ -76,7 +76,8 @@
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0";
-- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
-+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
-+ <&dram_gates 26>;
- status = "disabled";
- };
-
-@@ -85,7 +86,7 @@
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-tve0";
- clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
-- <&ahb_gates 44>;
-+ <&ahb_gates 44>, <&dram_gates 26>;
- status = "disabled";
- };
- };
-@@ -501,6 +502,31 @@
- clock-output-names = "spi3";
- };
-
-+ dram_gates: clk@01c20100 {
-+ #clock-cells = <1>;
-+ compatible = "allwinner,sun4i-a10-dram-gates-clk";
-+ reg = <0x01c20100 0x4>;
-+ clocks = <&pll5 0>;
-+ clock-indices = <0>,
-+ <1>, <2>,
-+ <3>,
-+ <4>,
-+ <5>, <6>,
-+ <15>,
-+ <24>, <25>,
-+ <26>, <27>,
-+ <28>, <29>;
-+ clock-output-names = "dram_ve",
-+ "dram_csi0", "dram_csi1",
-+ "dram_ts",
-+ "dram_tvd",
-+ "dram_tve0", "dram_tve1",
-+ "dram_output",
-+ "dram_de_fe1", "dram_de_fe0",
-+ "dram_de_be0", "dram_de_be1",
-+ "dram_de_mp", "dram_ace";
-+ };
-+
- codec_clk: clk@01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
+++ /dev/null
-From ab6e23a4e388f5f2696b8e92c350f845142da118 Mon Sep 17 00:00:00 2001
-From: Jens Kuske <jenskuske@gmail.com>
-Date: Fri, 4 Dec 2015 22:24:40 +0100
-Subject: [PATCH] clk: sunxi: Add H3 clocks support
-
-The H3 clock control unit is similar to the those of other sun8i family
-members like the A23.
-
-It adds a new bus gates clock similar to the simple gates, but with a
-different parent clock for each single gate.
-Some of the gates use the new AHB2 clock as parent, whose clock source
-is muxable between AHB1 and PLL6/2. The documentation isn't totally clear
-about which devices belong to AHB2 now, especially USB EHIC/OHIC, so it
-is mostly based on Allwinner kernel source code.
-
-Signed-off-by: Jens Kuske <jenskuske@gmail.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- Documentation/devicetree/bindings/clock/sunxi.txt | 2 +
- drivers/clk/sunxi/Makefile | 1 +
- drivers/clk/sunxi/clk-sun8i-bus-gates.c | 112 ++++++++++++++++++++++
- drivers/clk/sunxi/clk-sunxi.c | 6 ++
- 4 files changed, 121 insertions(+)
- create mode 100644 drivers/clk/sunxi/clk-sun8i-bus-gates.c
-
---- a/drivers/clk/sunxi/Makefile
-+++ b/drivers/clk/sunxi/Makefile
-@@ -10,6 +10,7 @@ obj-y += clk-a10-pll2.o
- obj-y += clk-a20-gmac.o
- obj-y += clk-mod0.o
- obj-y += clk-simple-gates.o
-+obj-y += clk-sun8i-bus-gates.o
- obj-y += clk-sun8i-mbus.o
- obj-y += clk-sun9i-core.o
- obj-y += clk-sun9i-mmc.o
---- /dev/null
-+++ b/drivers/clk/sunxi/clk-sun8i-bus-gates.c
-@@ -0,0 +1,112 @@
-+/*
-+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
-+ *
-+ * Based on clk-simple-gates.c, which is:
-+ * Copyright 2015 Maxime Ripard
-+ *
-+ * Maxime Ripard <maxime.ripard@free-electrons.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+static DEFINE_SPINLOCK(gates_lock);
-+
-+static void __init sun8i_h3_bus_gates_init(struct device_node *node)
-+{
-+ static const char * const names[] = { "ahb1", "ahb2", "apb1", "apb2" };
-+ enum { AHB1, AHB2, APB1, APB2, PARENT_MAX } clk_parent;
-+ const char *parents[PARENT_MAX];
-+ struct clk_onecell_data *clk_data;
-+ const char *clk_name;
-+ struct property *prop;
-+ struct resource res;
-+ void __iomem *clk_reg;
-+ void __iomem *reg;
-+ const __be32 *p;
-+ int number, i;
-+ u8 clk_bit;
-+ u32 index;
-+
-+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
-+ if (IS_ERR(reg))
-+ return;
-+
-+ for (i = 0; i < ARRAY_SIZE(names); i++) {
-+ index = of_property_match_string(node, "clock-names",
-+ names[i]);
-+ if (index < 0)
-+ return;
-+
-+ parents[i] = of_clk_get_parent_name(node, index);
-+ }
-+
-+ clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
-+ if (!clk_data)
-+ goto err_unmap;
-+
-+ number = of_property_count_u32_elems(node, "clock-indices");
-+ of_property_read_u32_index(node, "clock-indices", number - 1, &number);
-+
-+ clk_data->clks = kcalloc(number + 1, sizeof(struct clk *), GFP_KERNEL);
-+ if (!clk_data->clks)
-+ goto err_free_data;
-+
-+ i = 0;
-+ of_property_for_each_u32(node, "clock-indices", prop, p, index) {
-+ of_property_read_string_index(node, "clock-output-names",
-+ i, &clk_name);
-+
-+ if (index == 17 || (index >= 29 && index <= 31))
-+ clk_parent = AHB2;
-+ else if (index <= 63 || index >= 128)
-+ clk_parent = AHB1;
-+ else if (index >= 64 && index <= 95)
-+ clk_parent = APB1;
-+ else if (index >= 96 && index <= 127)
-+ clk_parent = APB2;
-+
-+ clk_reg = reg + 4 * (index / 32);
-+ clk_bit = index % 32;
-+
-+ clk_data->clks[index] = clk_register_gate(NULL, clk_name,
-+ parents[clk_parent],
-+ 0, clk_reg, clk_bit,
-+ 0, &gates_lock);
-+ i++;
-+
-+ if (IS_ERR(clk_data->clks[index])) {
-+ WARN_ON(true);
-+ continue;
-+ }
-+ }
-+
-+ clk_data->clk_num = number + 1;
-+ of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+
-+ return;
-+
-+err_free_data:
-+ kfree(clk_data);
-+err_unmap:
-+ iounmap(reg);
-+ of_address_to_resource(node, 0, &res);
-+ release_mem_region(res.start, resource_size(&res));
-+}
-+
-+CLK_OF_DECLARE(sun8i_h3_bus_gates, "allwinner,sun8i-h3-bus-gates-clk",
-+ sun8i_h3_bus_gates_init);
---- a/drivers/clk/sunxi/clk-sunxi.c
-+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -778,6 +778,10 @@ static const struct mux_data sun6i_a31_a
- .shift = 12,
- };
-
-+static const struct mux_data sun8i_h3_ahb2_mux_data __initconst = {
-+ .shift = 0,
-+};
-+
- static void __init sunxi_mux_clk_setup(struct device_node *node,
- struct mux_data *data)
- {
-@@ -1130,6 +1134,7 @@ static const struct of_device_id clk_div
- static const struct of_device_id clk_mux_match[] __initconst = {
- {.compatible = "allwinner,sun4i-a10-cpu-clk", .data = &sun4i_cpu_mux_data,},
- {.compatible = "allwinner,sun6i-a31-ahb1-mux-clk", .data = &sun6i_a31_ahb1_mux_data,},
-+ {.compatible = "allwinner,sun8i-h3-ahb2-clk", .data = &sun8i_h3_ahb2_mux_data,},
- {}
- };
-
-@@ -1212,6 +1217,7 @@ CLK_OF_DECLARE(sun6i_a31_clk_init, "allw
- CLK_OF_DECLARE(sun6i_a31s_clk_init, "allwinner,sun6i-a31s", sun6i_init_clocks);
- CLK_OF_DECLARE(sun8i_a23_clk_init, "allwinner,sun8i-a23", sun6i_init_clocks);
- CLK_OF_DECLARE(sun8i_a33_clk_init, "allwinner,sun8i-a33", sun6i_init_clocks);
-+CLK_OF_DECLARE(sun8i_h3_clk_init, "allwinner,sun8i-h3", sun6i_init_clocks);
-
- static void __init sun9i_init_clocks(struct device_node *node)
- {
+++ /dev/null
-From 318d93bc41823e86967c8251eef0444a72e4d687 Mon Sep 17 00:00:00 2001
-From: Jens Kuske <jenskuske@gmail.com>
-Date: Fri, 4 Dec 2015 22:24:42 +0100
-Subject: [PATCH] ARM: dts: sunxi: Add Allwinner H3 DTSI
-
-The Allwinner H3 is a home entertainment system oriented SoC with
-four Cortex-A7 cores and a Mali-400MP2 GPU.
-
-Signed-off-by: Jens Kuske <jenskuske@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun8i-h3.dtsi | 497 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 497 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun8i-h3.dtsi
-
---- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
-@@ -0,0 +1,497 @@
-+/*
-+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "skeleton.dtsi"
-+
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+ interrupt-parent = <&gic>;
-+
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ cpu@0 {
-+ compatible = "arm,cortex-a7";
-+ device_type = "cpu";
-+ reg = <0>;
-+ };
-+
-+ cpu@1 {
-+ compatible = "arm,cortex-a7";
-+ device_type = "cpu";
-+ reg = <1>;
-+ };
-+
-+ cpu@2 {
-+ compatible = "arm,cortex-a7";
-+ device_type = "cpu";
-+ reg = <2>;
-+ };
-+
-+ cpu@3 {
-+ compatible = "arm,cortex-a7";
-+ device_type = "cpu";
-+ reg = <3>;
-+ };
-+ };
-+
-+ timer {
-+ compatible = "arm,armv7-timer";
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-+ };
-+
-+ clocks {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ osc24M: osc24M_clk {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <24000000>;
-+ clock-output-names = "osc24M";
-+ };
-+
-+ osc32k: osc32k_clk {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <32768>;
-+ clock-output-names = "osc32k";
-+ };
-+
-+ pll1: clk@01c20000 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun8i-a23-pll1-clk";
-+ reg = <0x01c20000 0x4>;
-+ clocks = <&osc24M>;
-+ clock-output-names = "pll1";
-+ };
-+
-+ /* dummy clock until actually implemented */
-+ pll5: pll5_clk {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <0>;
-+ clock-output-names = "pll5";
-+ };
-+
-+ pll6: clk@01c20028 {
-+ #clock-cells = <1>;
-+ compatible = "allwinner,sun6i-a31-pll6-clk";
-+ reg = <0x01c20028 0x4>;
-+ clocks = <&osc24M>;
-+ clock-output-names = "pll6", "pll6x2";
-+ };
-+
-+ pll6d2: pll6d2_clk {
-+ #clock-cells = <0>;
-+ compatible = "fixed-factor-clock";
-+ clock-div = <2>;
-+ clock-mult = <1>;
-+ clocks = <&pll6 0>;
-+ clock-output-names = "pll6d2";
-+ };
-+
-+ /* dummy clock until pll6 can be reused */
-+ pll8: pll8_clk {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <1>;
-+ clock-output-names = "pll8";
-+ };
-+
-+ cpu: cpu_clk@01c20050 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-cpu-clk";
-+ reg = <0x01c20050 0x4>;
-+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-+ clock-output-names = "cpu";
-+ };
-+
-+ axi: axi_clk@01c20050 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-axi-clk";
-+ reg = <0x01c20050 0x4>;
-+ clocks = <&cpu>;
-+ clock-output-names = "axi";
-+ };
-+
-+ ahb1: ahb1_clk@01c20054 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun6i-a31-ahb1-clk";
-+ reg = <0x01c20054 0x4>;
-+ clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-+ clock-output-names = "ahb1";
-+ };
-+
-+ ahb2: ahb2_clk@01c2005c {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun8i-h3-ahb2-clk";
-+ reg = <0x01c2005c 0x4>;
-+ clocks = <&ahb1>, <&pll6d2>;
-+ clock-output-names = "ahb2";
-+ };
-+
-+ apb1: apb1_clk@01c20054 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-apb0-clk";
-+ reg = <0x01c20054 0x4>;
-+ clocks = <&ahb1>;
-+ clock-output-names = "apb1";
-+ };
-+
-+ apb2: apb2_clk@01c20058 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-apb1-clk";
-+ reg = <0x01c20058 0x4>;
-+ clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
-+ clock-output-names = "apb2";
-+ };
-+
-+ bus_gates: clk@01c20060 {
-+ #clock-cells = <1>;
-+ compatible = "allwinner,sun8i-h3-bus-gates-clk";
-+ reg = <0x01c20060 0x14>;
-+ clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
-+ clock-names = "ahb1", "ahb2", "apb1", "apb2";
-+ clock-indices = <5>, <6>, <8>,
-+ <9>, <10>, <13>,
-+ <14>, <17>, <18>,
-+ <19>, <20>,
-+ <21>, <23>,
-+ <24>, <25>,
-+ <26>, <27>,
-+ <28>, <29>,
-+ <30>, <31>, <32>,
-+ <35>, <36>, <37>,
-+ <40>, <41>, <43>,
-+ <44>, <52>, <53>,
-+ <54>, <64>,
-+ <65>, <69>, <72>,
-+ <76>, <77>, <78>,
-+ <96>, <97>, <98>,
-+ <112>, <113>,
-+ <114>, <115>,
-+ <116>, <128>, <135>;
-+ clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
-+ "bus_mmc1", "bus_mmc2", "bus_nand",
-+ "bus_sdram", "bus_gmac", "bus_ts",
-+ "bus_hstimer", "bus_spi0",
-+ "bus_spi1", "bus_otg",
-+ "bus_otg_ehci0", "bus_ehci1",
-+ "bus_ehci2", "bus_ehci3",
-+ "bus_otg_ohci0", "bus_ohci1",
-+ "bus_ohci2", "bus_ohci3", "bus_ve",
-+ "bus_lcd0", "bus_lcd1", "bus_deint",
-+ "bus_csi", "bus_tve", "bus_hdmi",
-+ "bus_de", "bus_gpu", "bus_msgbox",
-+ "bus_spinlock", "bus_codec",
-+ "bus_spdif", "bus_pio", "bus_ths",
-+ "bus_i2s0", "bus_i2s1", "bus_i2s2",
-+ "bus_i2c0", "bus_i2c1", "bus_i2c2",
-+ "bus_uart0", "bus_uart1",
-+ "bus_uart2", "bus_uart3",
-+ "bus_scr", "bus_ephy", "bus_dbg";
-+ };
-+
-+ mmc0_clk: clk@01c20088 {
-+ #clock-cells = <1>;
-+ compatible = "allwinner,sun4i-a10-mmc-clk";
-+ reg = <0x01c20088 0x4>;
-+ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
-+ clock-output-names = "mmc0",
-+ "mmc0_output",
-+ "mmc0_sample";
-+ };
-+
-+ mmc1_clk: clk@01c2008c {
-+ #clock-cells = <1>;
-+ compatible = "allwinner,sun4i-a10-mmc-clk";
-+ reg = <0x01c2008c 0x4>;
-+ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
-+ clock-output-names = "mmc1",
-+ "mmc1_output",
-+ "mmc1_sample";
-+ };
-+
-+ mmc2_clk: clk@01c20090 {
-+ #clock-cells = <1>;
-+ compatible = "allwinner,sun4i-a10-mmc-clk";
-+ reg = <0x01c20090 0x4>;
-+ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
-+ clock-output-names = "mmc2",
-+ "mmc2_output",
-+ "mmc2_sample";
-+ };
-+
-+ mbus_clk: clk@01c2015c {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun8i-a23-mbus-clk";
-+ reg = <0x01c2015c 0x4>;
-+ clocks = <&osc24M>, <&pll6 1>, <&pll5>;
-+ clock-output-names = "mbus";
-+ };
-+ };
-+
-+ soc {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ dma: dma-controller@01c02000 {
-+ compatible = "allwinner,sun8i-h3-dma";
-+ reg = <0x01c02000 0x1000>;
-+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&bus_gates 6>;
-+ resets = <&ahb_rst 6>;
-+ #dma-cells = <1>;
-+ };
-+
-+ mmc0: mmc@01c0f000 {
-+ compatible = "allwinner,sun5i-a13-mmc";
-+ reg = <0x01c0f000 0x1000>;
-+ clocks = <&bus_gates 8>,
-+ <&mmc0_clk 0>,
-+ <&mmc0_clk 1>,
-+ <&mmc0_clk 2>;
-+ clock-names = "ahb",
-+ "mmc",
-+ "output",
-+ "sample";
-+ resets = <&ahb_rst 8>;
-+ reset-names = "ahb";
-+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ mmc1: mmc@01c10000 {
-+ compatible = "allwinner,sun5i-a13-mmc";
-+ reg = <0x01c10000 0x1000>;
-+ clocks = <&bus_gates 9>,
-+ <&mmc1_clk 0>,
-+ <&mmc1_clk 1>,
-+ <&mmc1_clk 2>;
-+ clock-names = "ahb",
-+ "mmc",
-+ "output",
-+ "sample";
-+ resets = <&ahb_rst 9>;
-+ reset-names = "ahb";
-+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ mmc2: mmc@01c11000 {
-+ compatible = "allwinner,sun5i-a13-mmc";
-+ reg = <0x01c11000 0x1000>;
-+ clocks = <&bus_gates 10>,
-+ <&mmc2_clk 0>,
-+ <&mmc2_clk 1>,
-+ <&mmc2_clk 2>;
-+ clock-names = "ahb",
-+ "mmc",
-+ "output",
-+ "sample";
-+ resets = <&ahb_rst 10>;
-+ reset-names = "ahb";
-+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ pio: pinctrl@01c20800 {
-+ compatible = "allwinner,sun8i-h3-pinctrl";
-+ reg = <0x01c20800 0x400>;
-+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&bus_gates 69>;
-+ gpio-controller;
-+ #gpio-cells = <3>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+
-+ uart0_pins_a: uart0@0 {
-+ allwinner,pins = "PA4", "PA5";
-+ allwinner,function = "uart0";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ mmc0_pins_a: mmc0@0 {
-+ allwinner,pins = "PF0", "PF1", "PF2", "PF3",
-+ "PF4", "PF5";
-+ allwinner,function = "mmc0";
-+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ mmc0_cd_pin: mmc0_cd_pin@0 {
-+ allwinner,pins = "PF6";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
-+ mmc1_pins_a: mmc1@0 {
-+ allwinner,pins = "PG0", "PG1", "PG2", "PG3",
-+ "PG4", "PG5";
-+ allwinner,function = "mmc1";
-+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+ };
-+
-+ ahb_rst: reset@01c202c0 {
-+ #reset-cells = <1>;
-+ compatible = "allwinner,sun6i-a31-ahb1-reset";
-+ reg = <0x01c202c0 0xc>;
-+ };
-+
-+ apb1_rst: reset@01c202d0 {
-+ #reset-cells = <1>;
-+ compatible = "allwinner,sun6i-a31-clock-reset";
-+ reg = <0x01c202d0 0x4>;
-+ };
-+
-+ apb2_rst: reset@01c202d8 {
-+ #reset-cells = <1>;
-+ compatible = "allwinner,sun6i-a31-clock-reset";
-+ reg = <0x01c202d8 0x4>;
-+ };
-+
-+ timer@01c20c00 {
-+ compatible = "allwinner,sun4i-a10-timer";
-+ reg = <0x01c20c00 0xa0>;
-+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&osc24M>;
-+ };
-+
-+ wdt0: watchdog@01c20ca0 {
-+ compatible = "allwinner,sun6i-a31-wdt";
-+ reg = <0x01c20ca0 0x20>;
-+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ uart0: serial@01c28000 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x01c28000 0x400>;
-+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-shift = <2>;
-+ reg-io-width = <4>;
-+ clocks = <&bus_gates 112>;
-+ resets = <&apb2_rst 16>;
-+ dmas = <&dma 6>, <&dma 6>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ };
-+
-+ uart1: serial@01c28400 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x01c28400 0x400>;
-+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-shift = <2>;
-+ reg-io-width = <4>;
-+ clocks = <&bus_gates 113>;
-+ resets = <&apb2_rst 17>;
-+ dmas = <&dma 7>, <&dma 7>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ };
-+
-+ uart2: serial@01c28800 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x01c28800 0x400>;
-+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-shift = <2>;
-+ reg-io-width = <4>;
-+ clocks = <&bus_gates 114>;
-+ resets = <&apb2_rst 18>;
-+ dmas = <&dma 8>, <&dma 8>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ };
-+
-+ uart3: serial@01c28c00 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x01c28c00 0x400>;
-+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-shift = <2>;
-+ reg-io-width = <4>;
-+ clocks = <&bus_gates 115>;
-+ resets = <&apb2_rst 19>;
-+ dmas = <&dma 9>, <&dma 9>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ };
-+
-+ gic: interrupt-controller@01c81000 {
-+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
-+ reg = <0x01c81000 0x1000>,
-+ <0x01c82000 0x1000>,
-+ <0x01c84000 0x2000>,
-+ <0x01c86000 0x2000>;
-+ interrupt-controller;
-+ #interrupt-cells = <3>;
-+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-+ };
-+
-+ rtc: rtc@01f00000 {
-+ compatible = "allwinner,sun6i-a31-rtc";
-+ reg = <0x01f00000 0x54>;
-+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+ };
-+};
+++ /dev/null
-From dfcf8196de7411a5e7fd49795938b1bc8c56859c Mon Sep 17 00:00:00 2001
-From: Jens Kuske <jenskuske@gmail.com>
-Date: Fri, 4 Dec 2015 22:24:43 +0100
-Subject: [PATCH] ARM: dts: sun8i: Add Orange Pi Plus support
-
-The Orange Pi Plus is a SBC based on the Allwinner H3 SoC
-with 8GB eMMC, multiple USB ports through a USB hub chip, SATA through
-a USB-SATA bridge, one uSD slot, a 10/100/1000M ethernet port,
-WiFi, HDMI, headphone jack, IR receiver, a microphone, a CSI connector
-and a 40-pin GPIO header.
-
-Signed-off-by: Jens Kuske <jenskuske@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/Makefile | 3 +-
- arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 77 ++++++++++++++++++++++++++++
- 2 files changed, 79 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -660,7 +660,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- sun8i-a33-ga10h-v1.1.dtb \
- sun8i-a33-ippo-q8h-v1.2.dtb \
- sun8i-a33-q8-tablet.dtb \
-- sun8i-a33-sinlinx-sina33.dtb
-+ sun8i-a33-sinlinx-sina33.dtb \
-+ sun8i-h3-orangepi-plus.dtb
- dtb-$(CONFIG_MACH_SUN9I) += \
- sun9i-a80-optimus.dtb \
- sun9i-a80-cubieboard4.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
-@@ -0,0 +1,77 @@
-+/*
-+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun8i-h3.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+ model = "Xunlong Orange Pi Plus";
-+ compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
-+ vmmc-supply = <®_vcc3v3>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-+ cd-inverted;
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+};
+++ /dev/null
-From 5c627d8e7660c170c591ef281184fd11d0493440 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 11 Dec 2015 16:32:17 +0100
-Subject: [PATCH] phy-sun4i-usb: Use of_match_node to get model specific config
- data
-
-Use of_match_node instead of calling of_device_is_compatible a ton of
-times to get model specific config data.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/phy-sun4i-usb.c | 121 +++++++++++++++++++++++++++++---------------
- 1 file changed, 79 insertions(+), 42 deletions(-)
-
---- a/drivers/phy/phy-sun4i-usb.c
-+++ b/drivers/phy/phy-sun4i-usb.c
-@@ -32,6 +32,7 @@
- #include <linux/mutex.h>
- #include <linux/of.h>
- #include <linux/of_address.h>
-+#include <linux/of_device.h>
- #include <linux/of_gpio.h>
- #include <linux/phy/phy.h>
- #include <linux/phy/phy-sun4i-usb.h>
-@@ -88,12 +89,23 @@
- #define DEBOUNCE_TIME msecs_to_jiffies(50)
- #define POLL_TIME msecs_to_jiffies(250)
-
-+enum sun4i_usb_phy_type {
-+ sun4i_a10_phy,
-+ sun8i_a33_phy,
-+};
-+
-+struct sun4i_usb_phy_cfg {
-+ int num_phys;
-+ enum sun4i_usb_phy_type type;
-+ u32 disc_thresh;
-+ u8 phyctl_offset;
-+ bool dedicated_clocks;
-+};
-+
- struct sun4i_usb_phy_data {
- void __iomem *base;
-+ const struct sun4i_usb_phy_cfg *cfg;
- struct mutex mutex;
-- int num_phys;
-- u32 disc_thresh;
-- bool has_a33_phyctl;
- struct sun4i_usb_phy {
- struct phy *phy;
- void __iomem *pmu;
-@@ -159,17 +171,14 @@ static void sun4i_usb_phy_write(struct s
- {
- struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
- u32 temp, usbc_bit = BIT(phy->index * 2);
-- void *phyctl;
-+ void *phyctl = phy_data->base + phy_data->cfg->phyctl_offset;
- int i;
-
- mutex_lock(&phy_data->mutex);
-
-- if (phy_data->has_a33_phyctl) {
-- phyctl = phy_data->base + REG_PHYCTL_A33;
-+ if (phy_data->cfg->type == sun8i_a33_phy) {
- /* A33 needs us to set phyctl to 0 explicitly */
- writel(0, phyctl);
-- } else {
-- phyctl = phy_data->base + REG_PHYCTL_A10;
- }
-
- for (i = 0; i < len; i++) {
-@@ -249,7 +258,8 @@ static int sun4i_usb_phy_init(struct phy
- sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
-
- /* Disconnect threshold adjustment */
-- sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, data->disc_thresh, 2);
-+ sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
-+ data->cfg->disc_thresh, 2);
-
- sun4i_usb_phy_passby(phy, 1);
-
-@@ -476,7 +486,7 @@ static struct phy *sun4i_usb_phy_xlate(s
- {
- struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
-
-- if (args->args[0] >= data->num_phys)
-+ if (args->args[0] >= data->cfg->num_phys)
- return ERR_PTR(-ENODEV);
-
- return data->phys[args->args[0]].phy;
-@@ -511,7 +521,6 @@ static int sun4i_usb_phy_probe(struct pl
- struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
- struct phy_provider *phy_provider;
-- bool dedicated_clocks;
- struct resource *res;
- int i, ret;
-
-@@ -522,29 +531,9 @@ static int sun4i_usb_phy_probe(struct pl
- mutex_init(&data->mutex);
- INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan);
- dev_set_drvdata(dev, data);
--
-- if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy") ||
-- of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy") ||
-- of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
-- data->num_phys = 2;
-- else
-- data->num_phys = 3;
--
-- if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy") ||
-- of_device_is_compatible(np, "allwinner,sun7i-a20-usb-phy"))
-- data->disc_thresh = 2;
-- else
-- data->disc_thresh = 3;
--
-- if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy") ||
-- of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy") ||
-- of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
-- dedicated_clocks = true;
-- else
-- dedicated_clocks = false;
--
-- if (of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
-- data->has_a33_phyctl = true;
-+ data->cfg = of_device_get_match_data(dev);
-+ if (!data->cfg)
-+ return -EINVAL;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
- data->base = devm_ioremap_resource(dev, res);
-@@ -590,7 +579,7 @@ static int sun4i_usb_phy_probe(struct pl
- }
- }
-
-- for (i = 0; i < data->num_phys; i++) {
-+ for (i = 0; i < data->cfg->num_phys; i++) {
- struct sun4i_usb_phy *phy = data->phys + i;
- char name[16];
-
-@@ -602,7 +591,7 @@ static int sun4i_usb_phy_probe(struct pl
- phy->vbus = NULL;
- }
-
-- if (dedicated_clocks)
-+ if (data->cfg->dedicated_clocks)
- snprintf(name, sizeof(name), "usb%d_phy", i);
- else
- strlcpy(name, "usb_phy", sizeof(name));
-@@ -689,13 +678,61 @@ static int sun4i_usb_phy_probe(struct pl
- return 0;
- }
-
-+static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
-+ .num_phys = 3,
-+ .type = sun4i_a10_phy,
-+ .disc_thresh = 3,
-+ .phyctl_offset = REG_PHYCTL_A10,
-+ .dedicated_clocks = false,
-+};
-+
-+static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
-+ .num_phys = 2,
-+ .type = sun4i_a10_phy,
-+ .disc_thresh = 2,
-+ .phyctl_offset = REG_PHYCTL_A10,
-+ .dedicated_clocks = false,
-+};
-+
-+static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
-+ .num_phys = 3,
-+ .type = sun4i_a10_phy,
-+ .disc_thresh = 3,
-+ .phyctl_offset = REG_PHYCTL_A10,
-+ .dedicated_clocks = true,
-+};
-+
-+static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
-+ .num_phys = 3,
-+ .type = sun4i_a10_phy,
-+ .disc_thresh = 2,
-+ .phyctl_offset = REG_PHYCTL_A10,
-+ .dedicated_clocks = false,
-+};
-+
-+static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
-+ .num_phys = 2,
-+ .type = sun4i_a10_phy,
-+ .disc_thresh = 3,
-+ .phyctl_offset = REG_PHYCTL_A10,
-+ .dedicated_clocks = true,
-+};
-+
-+static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
-+ .num_phys = 2,
-+ .type = sun8i_a33_phy,
-+ .disc_thresh = 3,
-+ .phyctl_offset = REG_PHYCTL_A33,
-+ .dedicated_clocks = true,
-+};
-+
- static const struct of_device_id sun4i_usb_phy_of_match[] = {
-- { .compatible = "allwinner,sun4i-a10-usb-phy" },
-- { .compatible = "allwinner,sun5i-a13-usb-phy" },
-- { .compatible = "allwinner,sun6i-a31-usb-phy" },
-- { .compatible = "allwinner,sun7i-a20-usb-phy" },
-- { .compatible = "allwinner,sun8i-a23-usb-phy" },
-- { .compatible = "allwinner,sun8i-a33-usb-phy" },
-+ { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
-+ { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
-+ { .compatible = "allwinner,sun6i-a31-usb-phy", .data = &sun6i_a31_cfg },
-+ { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
-+ { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
-+ { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
- { },
- };
- MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
+++ /dev/null
-From 317c5224795b41a08ba8c08573d74ba95096faa5 Mon Sep 17 00:00:00 2001
-From: Reinder de Haan <patchesrdh@mveas.com>
-Date: Fri, 11 Dec 2015 16:32:18 +0100
-Subject: [PATCH] phy-sun4i-usb: Add support for the host usb-phys found on the
- H3 SoC
-
-Note this commit only adds support for phys 1-3, phy 0, the otg phy, is
-not yet (fully) supported after this commit.
-
-Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- .../devicetree/bindings/phy/sun4i-usb-phy.txt | 1 +
- drivers/phy/phy-sun4i-usb.c | 41 +++++++++++++++++-----
- 2 files changed, 33 insertions(+), 9 deletions(-)
-
---- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
-+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
-@@ -9,6 +9,7 @@ Required properties:
- * allwinner,sun7i-a20-usb-phy
- * allwinner,sun8i-a23-usb-phy
- * allwinner,sun8i-a33-usb-phy
-+ * allwinner,sun8i-h3-usb-phy
- - reg : a list of offset + length pairs
- - reg-names :
- * "phy_ctrl"
---- a/drivers/phy/phy-sun4i-usb.c
-+++ b/drivers/phy/phy-sun4i-usb.c
-@@ -47,6 +47,9 @@
- #define REG_PHYBIST 0x08
- #define REG_PHYTUNE 0x0c
- #define REG_PHYCTL_A33 0x10
-+#define REG_PHY_UNK_H3 0x20
-+
-+#define REG_PMU_UNK_H3 0x10
-
- #define PHYCTL_DATA BIT(7)
-
-@@ -80,7 +83,7 @@
- #define PHY_DISCON_TH_SEL 0x2a
- #define PHY_SQUELCH_DETECT 0x3c
-
--#define MAX_PHYS 3
-+#define MAX_PHYS 4
-
- /*
- * Note do not raise the debounce time, we must report Vusb high within 100ms
-@@ -92,6 +95,7 @@
- enum sun4i_usb_phy_type {
- sun4i_a10_phy,
- sun8i_a33_phy,
-+ sun8i_h3_phy,
- };
-
- struct sun4i_usb_phy_cfg {
-@@ -239,6 +243,7 @@ static int sun4i_usb_phy_init(struct phy
- struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
- struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
- int ret;
-+ u32 val;
-
- ret = clk_prepare_enable(phy->clk);
- if (ret)
-@@ -250,16 +255,26 @@ static int sun4i_usb_phy_init(struct phy
- return ret;
- }
-
-- /* Enable USB 45 Ohm resistor calibration */
-- if (phy->index == 0)
-- sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
--
-- /* Adjust PHY's magnitude and rate */
-- sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
--
-- /* Disconnect threshold adjustment */
-- sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
-- data->cfg->disc_thresh, 2);
-+ if (data->cfg->type == sun8i_h3_phy) {
-+ if (phy->index == 0) {
-+ val = readl(data->base + REG_PHY_UNK_H3);
-+ writel(val & ~1, data->base + REG_PHY_UNK_H3);
-+ }
-+
-+ val = readl(phy->pmu + REG_PMU_UNK_H3);
-+ writel(val & ~2, phy->pmu + REG_PMU_UNK_H3);
-+ } else {
-+ /* Enable USB 45 Ohm resistor calibration */
-+ if (phy->index == 0)
-+ sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
-+
-+ /* Adjust PHY's magnitude and rate */
-+ sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
-+
-+ /* Disconnect threshold adjustment */
-+ sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
-+ data->cfg->disc_thresh, 2);
-+ }
-
- sun4i_usb_phy_passby(phy, 1);
-
-@@ -726,6 +741,13 @@ static const struct sun4i_usb_phy_cfg su
- .dedicated_clocks = true,
- };
-
-+static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
-+ .num_phys = 4,
-+ .type = sun8i_h3_phy,
-+ .disc_thresh = 3,
-+ .dedicated_clocks = true,
-+};
-+
- static const struct of_device_id sun4i_usb_phy_of_match[] = {
- { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
- { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
-@@ -733,6 +755,7 @@ static const struct of_device_id sun4i_u
- { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
- { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
- { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
-+ { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
- { },
- };
- MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
+++ /dev/null
-From 7bec0200ac214b5cba44e2c2c4385815be4b9f00 Mon Sep 17 00:00:00 2001
-From: Reinder de Haan <patchesrdh@mveas.com>
-Date: Sun, 15 Nov 2015 20:46:13 +0100
-Subject: [PATCH] clk: sunxi: Add support for the H3 usb phy clocks
-
-The H3 has a usb-phy clk register which is similar to that of earlier
-SoCs, but with support for a larger number of phys. So we can simply add
-a new set of clk-data and a new compatible and be done with it.
-
-Acked-by: Chen-Yu Tsai <wens@csie.org>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
- drivers/clk/sunxi/clk-usb.c | 12 ++++++++++++
- 2 files changed, 13 insertions(+)
-
---- a/Documentation/devicetree/bindings/clock/sunxi.txt
-+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
-@@ -70,6 +70,7 @@ Required properties:
- "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
- "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
- "allwinner,sun8i-a23-usb-clk" - for usb gates + resets on A23
-+ "allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3
- "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
- "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
-
---- a/drivers/clk/sunxi/clk-usb.c
-+++ b/drivers/clk/sunxi/clk-usb.c
-@@ -243,3 +243,15 @@ static void __init sun9i_a80_usb_phy_set
- sunxi_usb_clk_setup(node, &sun9i_a80_usb_phy_data, &a80_usb_phy_lock);
- }
- CLK_OF_DECLARE(sun9i_a80_usb_phy, "allwinner,sun9i-a80-usb-phy-clk", sun9i_a80_usb_phy_setup);
-+
-+static const struct usb_clk_data sun8i_h3_usb_clk_data __initconst = {
-+ .clk_mask = BIT(19) | BIT(18) | BIT(17) | BIT(16) |
-+ BIT(11) | BIT(10) | BIT(9) | BIT(8),
-+ .reset_mask = BIT(3) | BIT(2) | BIT(1) | BIT(0),
-+};
-+
-+static void __init sun8i_h3_usb_setup(struct device_node *node)
-+{
-+ sunxi_usb_clk_setup(node, &sun8i_h3_usb_clk_data, &sun4i_a10_usb_lock);
-+}
-+CLK_OF_DECLARE(sun8i_h3_usb, "allwinner,sun8i-h3-usb-clk", sun8i_h3_usb_setup);
+++ /dev/null
-From 3cdd9f5c4953465abb87ec757159cc0576ae6b0a Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Sat, 5 Dec 2015 21:16:43 +0800
-Subject: [PATCH] clk: sunxi: Add VE (Video Engine) module clock driver for
- sun[457]i
-
-The video engine has its own special module clock, consisting of a clock
-gate, configurable dividers, and a reset control.
-
-On later (sun[68]i) families, the reset control is moved out of this
-piece of hardware and grouped with reset controls of other peripherals.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Tested-by: Jens Kuske <jenskuske@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- Documentation/devicetree/bindings/clock/sunxi.txt | 4 +
- drivers/clk/sunxi/Makefile | 1 +
- drivers/clk/sunxi/clk-a10-ve.c | 171 ++++++++++++++++++++++
- 3 files changed, 176 insertions(+)
- create mode 100644 drivers/clk/sunxi/clk-a10-ve.c
-
---- a/Documentation/devicetree/bindings/clock/sunxi.txt
-+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
-@@ -73,6 +73,7 @@ Required properties:
- "allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3
- "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
- "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
-+ "allwinner,sun4i-a10-ve-clk" - for the Video Engine clock
-
- Required properties for all clocks:
- - reg : shall be the control register address for the clock.
-@@ -92,6 +93,9 @@ Required properties for all clocks:
- And "allwinner,*-usb-clk" clocks also require:
- - reset-cells : shall be set to 1
-
-+The "allwinner,sun4i-a10-ve-clk" clock also requires:
-+- reset-cells : shall be set to 0
-+
- The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
- - #reset-cells : shall be set to 1
- - resets : shall be the reset control phandle for the mmc block.
---- a/drivers/clk/sunxi/Makefile
-+++ b/drivers/clk/sunxi/Makefile
-@@ -7,6 +7,7 @@ obj-y += clk-a10-codec.o
- obj-y += clk-a10-hosc.o
- obj-y += clk-a10-mod1.o
- obj-y += clk-a10-pll2.o
-+obj-y += clk-a10-ve.o
- obj-y += clk-a20-gmac.o
- obj-y += clk-mod0.o
- obj-y += clk-simple-gates.o
---- /dev/null
-+++ b/drivers/clk/sunxi/clk-a10-ve.c
-@@ -0,0 +1,171 @@
-+/*
-+ * Copyright 2015 Chen-Yu Tsai
-+ *
-+ * Chen-Yu Tsai <wens@csie.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/reset-controller.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+static DEFINE_SPINLOCK(ve_lock);
-+
-+#define SUN4I_VE_ENABLE 31
-+#define SUN4I_VE_DIVIDER_SHIFT 16
-+#define SUN4I_VE_DIVIDER_WIDTH 3
-+#define SUN4I_VE_RESET 0
-+
-+/**
-+ * sunxi_ve_reset... - reset bit in ve clk registers handling
-+ */
-+
-+struct ve_reset_data {
-+ void __iomem *reg;
-+ spinlock_t *lock;
-+ struct reset_controller_dev rcdev;
-+};
-+
-+static int sunxi_ve_reset_assert(struct reset_controller_dev *rcdev,
-+ unsigned long id)
-+{
-+ struct ve_reset_data *data = container_of(rcdev,
-+ struct ve_reset_data,
-+ rcdev);
-+ unsigned long flags;
-+ u32 reg;
-+
-+ spin_lock_irqsave(data->lock, flags);
-+
-+ reg = readl(data->reg);
-+ writel(reg & ~BIT(SUN4I_VE_RESET), data->reg);
-+
-+ spin_unlock_irqrestore(data->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int sunxi_ve_reset_deassert(struct reset_controller_dev *rcdev,
-+ unsigned long id)
-+{
-+ struct ve_reset_data *data = container_of(rcdev,
-+ struct ve_reset_data,
-+ rcdev);
-+ unsigned long flags;
-+ u32 reg;
-+
-+ spin_lock_irqsave(data->lock, flags);
-+
-+ reg = readl(data->reg);
-+ writel(reg | BIT(SUN4I_VE_RESET), data->reg);
-+
-+ spin_unlock_irqrestore(data->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int sunxi_ve_of_xlate(struct reset_controller_dev *rcdev,
-+ const struct of_phandle_args *reset_spec)
-+{
-+ if (WARN_ON(reset_spec->args_count != 0))
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+static struct reset_control_ops sunxi_ve_reset_ops = {
-+ .assert = sunxi_ve_reset_assert,
-+ .deassert = sunxi_ve_reset_deassert,
-+};
-+
-+static void __init sun4i_ve_clk_setup(struct device_node *node)
-+{
-+ struct clk *clk;
-+ struct clk_divider *div;
-+ struct clk_gate *gate;
-+ struct ve_reset_data *reset_data;
-+ const char *parent;
-+ const char *clk_name = node->name;
-+ void __iomem *reg;
-+ int err;
-+
-+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
-+ if (IS_ERR(reg))
-+ return;
-+
-+ div = kzalloc(sizeof(*div), GFP_KERNEL);
-+ if (!div)
-+ goto err_unmap;
-+
-+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
-+ if (!gate)
-+ goto err_free_div;
-+
-+ of_property_read_string(node, "clock-output-names", &clk_name);
-+ parent = of_clk_get_parent_name(node, 0);
-+
-+ gate->reg = reg;
-+ gate->bit_idx = SUN4I_VE_ENABLE;
-+ gate->lock = &ve_lock;
-+
-+ div->reg = reg;
-+ div->shift = SUN4I_VE_DIVIDER_SHIFT;
-+ div->width = SUN4I_VE_DIVIDER_WIDTH;
-+ div->lock = &ve_lock;
-+
-+ clk = clk_register_composite(NULL, clk_name, &parent, 1,
-+ NULL, NULL,
-+ &div->hw, &clk_divider_ops,
-+ &gate->hw, &clk_gate_ops,
-+ CLK_SET_RATE_PARENT);
-+ if (IS_ERR(clk))
-+ goto err_free_gate;
-+
-+ err = of_clk_add_provider(node, of_clk_src_simple_get, clk);
-+ if (err)
-+ goto err_unregister_clk;
-+
-+ reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL);
-+ if (!reset_data)
-+ goto err_del_provider;
-+
-+ reset_data->reg = reg;
-+ reset_data->lock = &ve_lock;
-+ reset_data->rcdev.nr_resets = 1;
-+ reset_data->rcdev.ops = &sunxi_ve_reset_ops;
-+ reset_data->rcdev.of_node = node;
-+ reset_data->rcdev.of_xlate = sunxi_ve_of_xlate;
-+ reset_data->rcdev.of_reset_n_cells = 0;
-+ err = reset_controller_register(&reset_data->rcdev);
-+ if (err)
-+ goto err_free_reset;
-+
-+ return;
-+
-+err_free_reset:
-+ kfree(reset_data);
-+err_del_provider:
-+ of_clk_del_provider(node);
-+err_unregister_clk:
-+ clk_unregister(clk);
-+err_free_gate:
-+ kfree(gate);
-+err_free_div:
-+ kfree(div);
-+err_unmap:
-+ iounmap(reg);
-+}
-+CLK_OF_DECLARE(sun4i_ve, "allwinner,sun4i-a10-ve-clk",
-+ sun4i_ve_clk_setup);
+++ /dev/null
-From 1ccc4939220cf815c309feddcf82dba260499194 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Sat, 5 Dec 2015 21:16:45 +0800
-Subject: [PATCH] ARM: dts: sun4i: Add VE (Video Engine) module clock node
-
-The video engine has its own module clock, which also includes a
-reset control for it.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun4i-a10.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -520,6 +520,15 @@
- "dram_de_mp", "dram_ace";
- };
-
-+ ve_clk: clk@01c2013c {
-+ #clock-cells = <0>;
-+ #reset-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-ve-clk";
-+ reg = <0x01c2013c 0x4>;
-+ clocks = <&pll4>;
-+ clock-output-names = "ve";
-+ };
-+
- codec_clk: clk@01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
+++ /dev/null
-From f0571ab140723f9a898d4a404118580534dcc468 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Sat, 5 Dec 2015 21:16:47 +0800
-Subject: [PATCH] ARM: dts: sun7i: Add VE (Video Engine) module clock node
-
-The video engine has its own module clock, which also includes a
-reset control for it.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -527,6 +527,15 @@
- "dram_de_mp", "dram_ace";
- };
-
-+ ve_clk: clk@01c2013c {
-+ #clock-cells = <0>;
-+ #reset-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-ve-clk";
-+ reg = <0x01c2013c 0x4>;
-+ clocks = <&pll4>;
-+ clock-output-names = "ve";
-+ };
-+
- codec_clk: clk@01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
+++ /dev/null
-From fce20ac5d8c98f1a8ea5298051d9fa669e455f04 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 4 Aug 2015 23:22:45 +0200
-Subject: [PATCH] musb: sunxi: Ignore VBus errors in host-only mode
-
-For some unclear reason sometimes we get VBus errors in host-only mode,
-even though we do not have any vbus-detection then. Ignore these.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/usb/musb/sunxi.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/usb/musb/sunxi.c
-+++ b/drivers/usb/musb/sunxi.c
-@@ -194,6 +194,10 @@ static irqreturn_t sunxi_musb_interrupt(
- musb_writeb(musb->mregs, MUSB_FADDR, 0);
- }
-
-+ /* Ignore Vbus errors when in host only mode */
-+ if (musb->port_mode == MUSB_PORT_MODE_HOST)
-+ musb->int_usb &= ~MUSB_INTR_VBUSERROR;
-+
- musb->int_tx = readw(musb->mregs + SUNXI_MUSB_INTRTX);
- if (musb->int_tx)
- writew(musb->int_tx, musb->mregs + SUNXI_MUSB_INTRTX);
+++ /dev/null
-From 03b83828e452418c18ba506e3e02b5deadbb53fa Mon Sep 17 00:00:00 2001
-From: Jens Kuske <jenskuske@gmail.com>
-Date: Tue, 27 Oct 2015 17:50:23 +0100
-Subject: [PATCH] pinctrl: sunxi: Add H3 PIO controller support
-
-The H3 uses the same pin controller as previous SoC's from Allwinner.
-Add support for the pins controlled by the main PIO controller.
-
-Signed-off-by: Jens Kuske <jenskuske@gmail.com>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 +
- drivers/pinctrl/sunxi/Kconfig | 4 +
- drivers/pinctrl/sunxi/Makefile | 1 +
- drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c | 516 +++++++++++++++++++++
- 4 files changed, 522 insertions(+)
- create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
-
---- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
-+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
-@@ -18,6 +18,7 @@ Required properties:
- "allwinner,sun8i-a23-r-pinctrl"
- "allwinner,sun8i-a33-pinctrl"
- "allwinner,sun8i-a83t-pinctrl"
-+ "allwinner,sun8i-h3-pinctrl"
-
- - reg: Should contain the register physical address and length for the
- pin controller.
---- a/drivers/pinctrl/sunxi/Kconfig
-+++ b/drivers/pinctrl/sunxi/Kconfig
-@@ -51,6 +51,10 @@ config PINCTRL_SUN8I_A23_R
- depends on RESET_CONTROLLER
- select PINCTRL_SUNXI_COMMON
-
-+config PINCTRL_SUN8I_H3
-+ def_bool MACH_SUN8I
-+ select PINCTRL_SUNXI_COMMON
-+
- config PINCTRL_SUN9I_A80
- def_bool MACH_SUN9I
- select PINCTRL_SUNXI_COMMON
---- a/drivers/pinctrl/sunxi/Makefile
-+++ b/drivers/pinctrl/sunxi/Makefile
-@@ -13,4 +13,5 @@ obj-$(CONFIG_PINCTRL_SUN8I_A23) += pinc
- obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o
- obj-$(CONFIG_PINCTRL_SUN8I_A33) += pinctrl-sun8i-a33.o
- obj-$(CONFIG_PINCTRL_SUN8I_A83T) += pinctrl-sun8i-a83t.o
-+obj-$(CONFIG_PINCTRL_SUN8I_H3) += pinctrl-sun8i-h3.o
- obj-$(CONFIG_PINCTRL_SUN9I_A80) += pinctrl-sun9i-a80.o
---- /dev/null
-+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
-@@ -0,0 +1,516 @@
-+/*
-+ * Allwinner H3 SoCs pinctrl driver.
-+ *
-+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
-+ *
-+ * Based on pinctrl-sun8i-a23.c, which is:
-+ * Copyright (C) 2014 Chen-Yu Tsai <wens@csie.org>
-+ * Copyright (C) 2014 Maxime Ripard <maxime.ripard@free-electrons.com>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/pinctrl/pinctrl.h>
-+
-+#include "pinctrl-sunxi.h"
-+
-+static const struct sunxi_desc_pin sun8i_h3_pins[] = {
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 0),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "uart2"), /* TX */
-+ SUNXI_FUNCTION(0x3, "jtag"), /* MS */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* PA_EINT0 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 1),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "uart2"), /* RX */
-+ SUNXI_FUNCTION(0x3, "jtag"), /* CK */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)), /* PA_EINT1 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 2),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "uart2"), /* RTS */
-+ SUNXI_FUNCTION(0x3, "jtag"), /* DO */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)), /* PA_EINT2 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 3),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "uart2"), /* CTS */
-+ SUNXI_FUNCTION(0x3, "jtag"), /* DI */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)), /* PA_EINT3 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 4),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "uart0"), /* TX */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)), /* PA_EINT4 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 5),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "uart0"), /* RX */
-+ SUNXI_FUNCTION(0x3, "pwm0"),
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)), /* PA_EINT5 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 6),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "sim"), /* PWREN */
-+ SUNXI_FUNCTION(0x3, "pwm1"),
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)), /* PA_EINT6 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 7),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "sim"), /* CLK */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)), /* PA_EINT7 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 8),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "sim"), /* DATA */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)), /* PA_EINT8 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 9),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "sim"), /* RST */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)), /* PA_EINT9 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 10),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "sim"), /* DET */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 10)), /* PA_EINT10 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 11),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "i2c0"), /* SCK */
-+ SUNXI_FUNCTION(0x3, "di"), /* TX */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 11)), /* PA_EINT11 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 12),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "i2c0"), /* SDA */
-+ SUNXI_FUNCTION(0x3, "di"), /* RX */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 12)), /* PA_EINT12 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 13),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "spi1"), /* CS */
-+ SUNXI_FUNCTION(0x3, "uart3"), /* TX */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 13)), /* PA_EINT13 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 14),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "spi1"), /* CLK */
-+ SUNXI_FUNCTION(0x3, "uart3"), /* RX */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 14)), /* PA_EINT14 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 15),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "spi1"), /* MOSI */
-+ SUNXI_FUNCTION(0x3, "uart3"), /* RTS */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 15)), /* PA_EINT15 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 16),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "spi1"), /* MISO */
-+ SUNXI_FUNCTION(0x3, "uart3"), /* CTS */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 16)), /* PA_EINT16 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 17),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "spdif"), /* OUT */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 17)), /* PA_EINT17 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 18),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "i2s0"), /* SYNC */
-+ SUNXI_FUNCTION(0x3, "i2c1"), /* SCK */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 18)), /* PA_EINT18 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 19),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "i2s0"), /* CLK */
-+ SUNXI_FUNCTION(0x3, "i2c1"), /* SDA */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 19)), /* PA_EINT19 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 20),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "i2s0"), /* DOUT */
-+ SUNXI_FUNCTION(0x3, "sim"), /* VPPEN */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 20)), /* PA_EINT20 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 21),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "i2s0"), /* DIN */
-+ SUNXI_FUNCTION(0x3, "sim"), /* VPPPP */
-+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 21)), /* PA_EINT21 */
-+ /* Hole */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 0),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand0"), /* WE */
-+ SUNXI_FUNCTION(0x3, "spi0")), /* MOSI */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 1),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand0"), /* ALE */
-+ SUNXI_FUNCTION(0x3, "spi0")), /* MISO */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 2),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand0"), /* CLE */
-+ SUNXI_FUNCTION(0x3, "spi0")), /* CLK */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 3),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand0"), /* CE1 */
-+ SUNXI_FUNCTION(0x3, "spi0")), /* CS */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 4),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand0")), /* CE0 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 5),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand0"), /* RE */
-+ SUNXI_FUNCTION(0x3, "mmc2")), /* CLK */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 6),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand0"), /* RB0 */
-+ SUNXI_FUNCTION(0x3, "mmc2")), /* CMD */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 7),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand0")), /* RB1 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 8),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ0 */
-+ SUNXI_FUNCTION(0x3, "mmc2")), /* D0 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 9),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ1 */
-+ SUNXI_FUNCTION(0x3, "mmc2")), /* D1 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 10),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ2 */
-+ SUNXI_FUNCTION(0x3, "mmc2")), /* D2 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 11),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ3 */
-+ SUNXI_FUNCTION(0x3, "mmc2")), /* D3 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 12),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ4 */
-+ SUNXI_FUNCTION(0x3, "mmc2")), /* D4 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 13),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ5 */
-+ SUNXI_FUNCTION(0x3, "mmc2")), /* D5 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 14),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand"), /* DQ6 */
-+ SUNXI_FUNCTION(0x3, "mmc2")), /* D6 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 15),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand"), /* DQ7 */
-+ SUNXI_FUNCTION(0x3, "mmc2")), /* D7 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 16),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "nand"), /* DQS */
-+ SUNXI_FUNCTION(0x3, "mmc2")), /* RST */
-+ /* Hole */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 0),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* RXD3 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 1),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* RXD2 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 2),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* RXD1 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 3),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* RXD0 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 4),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* RXCK */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 5),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* RXCTL/RCDV */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 6),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* RXERR */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 7),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* TXD3 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 8),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* TXD2L */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 9),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* TXD1 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 10),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* TXD0 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 11),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* CRS */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 12),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* TXCK */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 13),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* TXCTL/TXEN */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 14),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* TXERR */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 15),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* CLKIN/COL */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 16),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* MDC */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 17),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "emac")), /* MDIO */
-+ /* Hole */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 0),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "csi"), /* PCLK */
-+ SUNXI_FUNCTION(0x3, "ts")), /* CLK */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 1),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "csi"), /* MCLK */
-+ SUNXI_FUNCTION(0x3, "ts")), /* ERR */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 2),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "csi"), /* HSYNC */
-+ SUNXI_FUNCTION(0x3, "ts")), /* SYNC */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 3),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "csi"), /* VSYNC */
-+ SUNXI_FUNCTION(0x3, "ts")), /* DVLD */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 4),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "csi"), /* D0 */
-+ SUNXI_FUNCTION(0x3, "ts")), /* D0 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 5),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "csi"), /* D1 */
-+ SUNXI_FUNCTION(0x3, "ts")), /* D1 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 6),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "csi"), /* D2 */
-+ SUNXI_FUNCTION(0x3, "ts")), /* D2 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 7),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "csi"), /* D3 */
-+ SUNXI_FUNCTION(0x3, "ts")), /* D3 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 8),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "csi"), /* D4 */
-+ SUNXI_FUNCTION(0x3, "ts")), /* D4 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 9),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "csi"), /* D5 */
-+ SUNXI_FUNCTION(0x3, "ts")), /* D5 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 10),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "csi"), /* D6 */
-+ SUNXI_FUNCTION(0x3, "ts")), /* D6 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 11),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "csi"), /* D7 */
-+ SUNXI_FUNCTION(0x3, "ts")), /* D7 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 12),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "csi"), /* SCK */
-+ SUNXI_FUNCTION(0x3, "i2c2")), /* SCK */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 13),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "csi"), /* SDA */
-+ SUNXI_FUNCTION(0x3, "i2c2")), /* SDA */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 14),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out")),
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 15),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out")),
-+ /* Hole */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 0),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "mmc0"), /* D1 */
-+ SUNXI_FUNCTION(0x3, "jtag")), /* MS */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 1),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "mmc0"), /* D0 */
-+ SUNXI_FUNCTION(0x3, "jtag")), /* DI */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 2),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "mmc0"), /* CLK */
-+ SUNXI_FUNCTION(0x3, "uart0")), /* TX */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 3),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "mmc0"), /* CMD */
-+ SUNXI_FUNCTION(0x3, "jtag")), /* DO */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 4),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "mmc0"), /* D3 */
-+ SUNXI_FUNCTION(0x3, "uart0")), /* RX */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 5),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "mmc0"), /* D2 */
-+ SUNXI_FUNCTION(0x3, "jtag")), /* CK */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 6),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "mmc0")), /* DET */
-+ /* Hole */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 0),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "mmc1"), /* CLK */
-+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 0)), /* PG_EINT0 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 1),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "mmc1"), /* CMD */
-+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 1)), /* PG_EINT1 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 2),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "mmc1"), /* D0 */
-+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 2)), /* PG_EINT2 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 3),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "mmc1"), /* D1 */
-+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 3)), /* PG_EINT3 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 4),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "mmc1"), /* D2 */
-+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 4)), /* PG_EINT4 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 5),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "mmc1"), /* D3 */
-+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 5)), /* PG_EINT5 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 6),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "uart1"), /* TX */
-+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 6)), /* PG_EINT6 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 7),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "uart1"), /* RX */
-+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 7)), /* PG_EINT7 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 8),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "uart1"), /* RTS */
-+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 8)), /* PG_EINT8 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 9),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "uart1"), /* CTS */
-+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 9)), /* PG_EINT9 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 10),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "i2s1"), /* SYNC */
-+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 10)), /* PG_EINT10 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 11),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "i2s1"), /* CLK */
-+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 11)), /* PG_EINT11 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 12),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "i2s1"), /* DOUT */
-+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 12)), /* PG_EINT12 */
-+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 13),
-+ SUNXI_FUNCTION(0x0, "gpio_in"),
-+ SUNXI_FUNCTION(0x1, "gpio_out"),
-+ SUNXI_FUNCTION(0x2, "i2s1"), /* DIN */
-+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 13)), /* PG_EINT13 */
-+};
-+
-+static const struct sunxi_pinctrl_desc sun8i_h3_pinctrl_data = {
-+ .pins = sun8i_h3_pins,
-+ .npins = ARRAY_SIZE(sun8i_h3_pins),
-+ .irq_banks = 2,
-+};
-+
-+static int sun8i_h3_pinctrl_probe(struct platform_device *pdev)
-+{
-+ return sunxi_pinctrl_init(pdev,
-+ &sun8i_h3_pinctrl_data);
-+}
-+
-+static const struct of_device_id sun8i_h3_pinctrl_match[] = {
-+ { .compatible = "allwinner,sun8i-h3-pinctrl", },
-+ {}
-+};
-+
-+static struct platform_driver sun8i_h3_pinctrl_driver = {
-+ .probe = sun8i_h3_pinctrl_probe,
-+ .driver = {
-+ .name = "sun8i-h3-pinctrl",
-+ .of_match_table = sun8i_h3_pinctrl_match,
-+ },
-+};
-+builtin_platform_driver(sun8i_h3_pinctrl_driver);
+++ /dev/null
-From 5f0bb9d0bc545ef53a83f7bd176fdc0736eed8e5 Mon Sep 17 00:00:00 2001
-From: Jens Kuske <jenskuske@gmail.com>
-Date: Tue, 27 Oct 2015 17:50:24 +0100
-Subject: [PATCH] reset: sunxi: Add Allwinner H3 bus resets
-
-The H3 bus resets have some holes between the registers, so we add
-an of_xlate() function to skip them according to the datasheet.
-
-Signed-off-by: Jens Kuske <jenskuske@gmail.com>
----
- .../bindings/reset/allwinner,sunxi-clock-reset.txt | 1 +
- drivers/reset/reset-sunxi.c | 30 +++++++++++++++++++---
- 2 files changed, 28 insertions(+), 3 deletions(-)
-
---- a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
-+++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
-@@ -8,6 +8,7 @@ Required properties:
- - compatible: Should be one of the following:
- "allwinner,sun6i-a31-ahb1-reset"
- "allwinner,sun6i-a31-clock-reset"
-+ "allwinner,sun8i-h3-bus-reset"
- - reg: should be register base and length as documented in the
- datasheet
- - #reset-cells: 1, see below
---- a/drivers/reset/reset-sunxi.c
-+++ b/drivers/reset/reset-sunxi.c
-@@ -75,7 +75,9 @@ static struct reset_control_ops sunxi_re
- .deassert = sunxi_reset_deassert,
- };
-
--static int sunxi_reset_init(struct device_node *np)
-+static int sunxi_reset_init(struct device_node *np,
-+ int (*of_xlate)(struct reset_controller_dev *rcdev,
-+ const struct of_phandle_args *reset_spec))
- {
- struct sunxi_reset_data *data;
- struct resource res;
-@@ -108,6 +110,7 @@ static int sunxi_reset_init(struct devic
- data->rcdev.nr_resets = size * 32;
- data->rcdev.ops = &sunxi_reset_ops;
- data->rcdev.of_node = np;
-+ data->rcdev.of_xlate = of_xlate;
- reset_controller_register(&data->rcdev);
-
- return 0;
-@@ -117,6 +120,21 @@ err_alloc:
- return ret;
- };
-
-+static int sun8i_h3_bus_reset_xlate(struct reset_controller_dev *rcdev,
-+ const struct of_phandle_args *reset_spec)
-+{
-+ unsigned int index = reset_spec->args[0];
-+
-+ if (index < 96)
-+ return index;
-+ else if (index < 128)
-+ return index + 32;
-+ else if (index < 160)
-+ return index + 64;
-+ else
-+ return -EINVAL;
-+}
-+
- /*
- * These are the reset controller we need to initialize early on in
- * our system, before we can even think of using a regular device
-@@ -124,15 +142,21 @@ err_alloc:
- */
- static const struct of_device_id sunxi_early_reset_dt_ids[] __initdata = {
- { .compatible = "allwinner,sun6i-a31-ahb1-reset", },
-+ { .compatible = "allwinner,sun8i-h3-bus-reset", .data = sun8i_h3_bus_reset_xlate, },
- { /* sentinel */ },
- };
-
- void __init sun6i_reset_init(void)
- {
- struct device_node *np;
--
-- for_each_matching_node(np, sunxi_early_reset_dt_ids)
-- sunxi_reset_init(np);
-+ const struct of_device_id *match;
-+ int (*of_xlate)(struct reset_controller_dev *rcdev,
-+ const struct of_phandle_args *reset_spec);
-+
-+ for_each_matching_node_and_match(np, sunxi_early_reset_dt_ids, &match) {
-+ of_xlate = match->data;
-+ sunxi_reset_init(np, of_xlate);
-+ }
- }
-
- /*
+++ /dev/null
-From d6a71e3caae07fb2d98e93ee62477273abaceb27 Mon Sep 17 00:00:00 2001
-From: Reinder de Haan <patchesrdh@mveas.com>
-Date: Tue, 3 Nov 2015 15:13:00 +0100
-Subject: [PATCH] ARM: dts: sun8i: Add support for H3 usb clocks
-
-Add a node describing the usb-clks found on the H3.
-
-Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun8i-h3.dtsi | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/arm/boot/dts/sun8i-h3.dtsi
-+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
-@@ -269,6 +269,18 @@
- "mmc2_sample";
- };
-
-+ usb_clk: clk@01c200cc {
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ compatible = "allwinner,sun8i-h3-usb-clk";
-+ reg = <0x01c200cc 0x4>;
-+ clocks = <&osc24M>;
-+ clock-output-names = "usb_phy0", "usb_phy1",
-+ "usb_phy2", "usb_phy3",
-+ "usb_ohci0", "usb_ohci1",
-+ "usb_ohci2", "usb_ohci3";
-+ };
-+
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun8i-a23-mbus-clk";
+++ /dev/null
-From 5971a2f283d21eab36d7de24d35301f081f83418 Mon Sep 17 00:00:00 2001
-From: Reinder de Haan <patchesrdh@mveas.com>
-Date: Tue, 3 Nov 2015 15:14:20 +0100
-Subject: [PATCH] ARM: dts: sun8i: Add usbphy and usb host controller nodes
-
-Add nodes describing the H3's usbphy and usb host controller nodes.
-
-Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun8i-h3.dtsi | 101 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 101 insertions(+)
-
---- a/arch/arm/boot/dts/sun8i-h3.dtsi
-+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
-@@ -362,6 +362,107 @@
- #size-cells = <0>;
- };
-
-+ usbphy: phy@01c19400 {
-+ compatible = "allwinner,sun8i-h3-usb-phy";
-+ reg = <0x01c19400 0x2c>,
-+ <0x01c1a800 0x4>,
-+ <0x01c1b800 0x4>,
-+ <0x01c1c800 0x4>,
-+ <0x01c1d800 0x4>;
-+ reg-names = "phy_ctrl",
-+ "pmu0",
-+ "pmu1",
-+ "pmu2",
-+ "pmu3";
-+ clocks = <&usb_clk 8>,
-+ <&usb_clk 9>,
-+ <&usb_clk 10>,
-+ <&usb_clk 11>;
-+ clock-names = "usb0_phy",
-+ "usb1_phy",
-+ "usb2_phy",
-+ "usb3_phy";
-+ resets = <&usb_clk 0>,
-+ <&usb_clk 1>,
-+ <&usb_clk 2>,
-+ <&usb_clk 3>;
-+ reset-names = "usb0_reset",
-+ "usb1_reset",
-+ "usb2_reset",
-+ "usb3_reset";
-+ status = "disabled";
-+ #phy-cells = <1>;
-+ };
-+
-+ ehci1: usb@01c1b000 {
-+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
-+ reg = <0x01c1b000 0x100>;
-+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&bus_gates 25>, <&bus_gates 29>;
-+ resets = <&ahb_rst 25>, <&ahb_rst 29>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci1: usb@01c1b400 {
-+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
-+ reg = <0x01c1b400 0x100>;
-+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&bus_gates 29>, <&bus_gates 25>,
-+ <&usb_clk 17>;
-+ resets = <&ahb_rst 29>, <&ahb_rst 25>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ehci2: usb@01c1c000 {
-+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
-+ reg = <0x01c1c000 0x100>;
-+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&bus_gates 26>, <&bus_gates 30>;
-+ resets = <&ahb_rst 26>, <&ahb_rst 30>;
-+ phys = <&usbphy 2>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci2: usb@01c1c400 {
-+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
-+ reg = <0x01c1c400 0x100>;
-+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&bus_gates 30>, <&bus_gates 26>,
-+ <&usb_clk 18>;
-+ resets = <&ahb_rst 30>, <&ahb_rst 26>;
-+ phys = <&usbphy 2>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ehci3: usb@01c1d000 {
-+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
-+ reg = <0x01c1d000 0x100>;
-+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&bus_gates 27>, <&bus_gates 31>;
-+ resets = <&ahb_rst 27>, <&ahb_rst 31>;
-+ phys = <&usbphy 3>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci3: usb@01c1d400 {
-+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
-+ reg = <0x01c1d400 0x100>;
-+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&bus_gates 31>, <&bus_gates 27>,
-+ <&usb_clk 19>;
-+ resets = <&ahb_rst 31>, <&ahb_rst 27>;
-+ phys = <&usbphy 3>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
- pio: pinctrl@01c20800 {
- compatible = "allwinner,sun8i-h3-pinctrl";
- reg = <0x01c20800 0x400>;
+++ /dev/null
-From 37e04fd781d3fc6d08116d38d34ec8124d916441 Mon Sep 17 00:00:00 2001
-From: Jens Kuske <jenskuske@gmail.com>
-Date: Tue, 17 Nov 2015 17:12:07 +0100
-Subject: [PATCH] ARM: dts: sun8i-h3-orangepi-plus: Enable USB host controllers
-
-Enable the 2 USB host controllers used on the Orange Pi Plus
-and add the necessary regulators.
-
-Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Jens Kuske <jenskuske@gmail.com>
----
- arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 44 ++++++++++++++++++++++++++++
- 1 file changed, 44 insertions(+)
-
---- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
-+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
-@@ -58,6 +58,35 @@
- chosen {
- stdout-path = "serial0:115200n8";
- };
-+
-+ reg_usb3_vbus: usb3-vbus {
-+ compatible = "regulator-fixed";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb3_vbus_pin_a>;
-+ regulator-name = "usb3-vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-boot-on;
-+ enable-active-high;
-+ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-+ };
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&ehci3 {
-+ status = "okay";
-+};
-+
-+&pio {
-+ usb3_vbus_pin_a: usb3_vbus_pin@0 {
-+ allwinner,pins = "PG11";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
- };
-
- &mmc0 {
-@@ -70,8 +99,23 @@
- status = "okay";
- };
-
-+®_usb1_vbus {
-+ gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
-+ status = "okay";
-+};
-+
- &uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-+
-+&usb1_vbus_pin_a {
-+ allwinner,pins = "PG13";
-+};
-+
-+&usbphy {
-+ usb1_vbus-supply = <®_usb1_vbus>;
-+ usb3_vbus-supply = <®_usb3_vbus>;
-+ status = "okay";
-+};
+++ /dev/null
-From b1558f168f4ef5956913d73fe330c4da85c74349 Mon Sep 17 00:00:00 2001
-From: Dan Carpenter <dan.carpenter@oracle.com>
-Date: Sat, 12 Dec 2015 15:43:46 +0300
-Subject: [PATCH] clk: sunxi: signedness bug in sun8i_h3_bus_gates_init()
-
-"index" needs to be signed for the error handling to work.
-
-Fixes: ab6e23a4e388 ('clk: sunxi: Add H3 clocks support')
-Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- drivers/clk/sunxi/clk-sun8i-bus-gates.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/clk/sunxi/clk-sun8i-bus-gates.c
-+++ b/drivers/clk/sunxi/clk-sun8i-bus-gates.c
-@@ -40,7 +40,7 @@ static void __init sun8i_h3_bus_gates_in
- const __be32 *p;
- int number, i;
- u8 clk_bit;
-- u32 index;
-+ int index;
-
- reg = of_io_request_and_map(node, 0, of_node_full_name(node));
- if (IS_ERR(reg))
+++ /dev/null
-From b4faa163a7ebae9faab5d0aefe70143e3379178b Mon Sep 17 00:00:00 2001
-From: Vince Hsu <vinceh@nvidia.com>
-Date: Mon, 13 Jul 2015 13:39:39 +0100
-Subject: [PATCH] reset: add of_reset_control_get_by_index()
-
-Add of_reset_control_get_by_index() to allow the drivers to get reset
-device without knowing its name.
-
-Signed-off-by: Vince Hsu <vinceh@nvidia.com>
-[jonathanh@nvidia.com: Updated stub function to return -ENOTSUPP instead
- of -ENOSYS which should only be used for system calls.]
-Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
-Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
----
- drivers/reset/core.c | 40 +++++++++++++++++++++++++++++-----------
- include/linux/reset.h | 9 +++++++++
- 2 files changed, 38 insertions(+), 11 deletions(-)
-
---- a/drivers/reset/core.c
-+++ b/drivers/reset/core.c
-@@ -141,27 +141,24 @@ int reset_control_status(struct reset_co
- EXPORT_SYMBOL_GPL(reset_control_status);
-
- /**
-- * of_reset_control_get - Lookup and obtain a reference to a reset controller.
-+ * of_reset_control_get_by_index - Lookup and obtain a reference to a reset
-+ * controller by index.
- * @node: device to be reset by the controller
-- * @id: reset line name
-- *
-- * Returns a struct reset_control or IS_ERR() condition containing errno.
-+ * @index: index of the reset controller
- *
-- * Use of id names is optional.
-+ * This is to be used to perform a list of resets for a device or power domain
-+ * in whatever order. Returns a struct reset_control or IS_ERR() condition
-+ * containing errno.
- */
--struct reset_control *of_reset_control_get(struct device_node *node,
-- const char *id)
-+struct reset_control *of_reset_control_get_by_index(struct device_node *node,
-+ int index)
- {
- struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER);
- struct reset_controller_dev *r, *rcdev;
- struct of_phandle_args args;
-- int index = 0;
- int rstc_id;
- int ret;
-
-- if (id)
-- index = of_property_match_string(node,
-- "reset-names", id);
- ret = of_parse_phandle_with_args(node, "resets", "#reset-cells",
- index, &args);
- if (ret)
-@@ -202,6 +199,27 @@ struct reset_control *of_reset_control_g
-
- return rstc;
- }
-+EXPORT_SYMBOL_GPL(of_reset_control_get_by_index);
-+
-+/**
-+ * of_reset_control_get - Lookup and obtain a reference to a reset controller.
-+ * @node: device to be reset by the controller
-+ * @id: reset line name
-+ *
-+ * Returns a struct reset_control or IS_ERR() condition containing errno.
-+ *
-+ * Use of id names is optional.
-+ */
-+struct reset_control *of_reset_control_get(struct device_node *node,
-+ const char *id)
-+{
-+ int index = 0;
-+
-+ if (id)
-+ index = of_property_match_string(node,
-+ "reset-names", id);
-+ return of_reset_control_get_by_index(node, index);
-+}
- EXPORT_SYMBOL_GPL(of_reset_control_get);
-
- /**
---- a/include/linux/reset.h
-+++ b/include/linux/reset.h
-@@ -38,6 +38,9 @@ static inline struct reset_control *devm
- struct reset_control *of_reset_control_get(struct device_node *node,
- const char *id);
-
-+struct reset_control *of_reset_control_get_by_index(
-+ struct device_node *node, int index);
-+
- #else
-
- static inline int reset_control_reset(struct reset_control *rstc)
-@@ -106,6 +109,12 @@ static inline struct reset_control *of_r
- return ERR_PTR(-ENOSYS);
- }
-
-+static inline struct reset_control *of_reset_control_get_by_index(
-+ struct device_node *node, int index)
-+{
-+ return ERR_PTR(-ENOTSUPP);
-+}
-+
- #endif /* CONFIG_RESET_CONTROLLER */
-
- #endif
+++ /dev/null
-From 7fd7a26b60090a7df15f30ba10b0d39cbbd6a94e Mon Sep 17 00:00:00 2001
-From: Alban Bedel <albeu@free.fr>
-Date: Tue, 1 Sep 2015 17:28:31 +0200
-Subject: [PATCH] reset: Fix of_reset_control_get() for consistent return
- values
-
-When of_reset_control_get() is called without connection ID it returns
--ENOENT when the 'resets' property doesn't exists or is an empty entry.
-However when a connection ID is given it returns -EINVAL when the 'resets'
-property doesn't exists or the requested name can't be found. This is
-because the error code returned by of_property_match_string() is just
-passed down as an index to of_parse_phandle_with_args(), which then
-returns -EINVAL.
-
-To get a consistent return value with both code paths we must return
--ENOENT when of_property_match_string() fails.
-
-Signed-off-by: Alban Bedel <albeu@free.fr>
-Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
----
- drivers/reset/core.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/reset/core.c
-+++ b/drivers/reset/core.c
-@@ -215,9 +215,12 @@ struct reset_control *of_reset_control_g
- {
- int index = 0;
-
-- if (id)
-+ if (id) {
- index = of_property_match_string(node,
- "reset-names", id);
-+ if (index < 0)
-+ return ERR_PTR(-ENOENT);
-+ }
- return of_reset_control_get_by_index(node, index);
- }
- EXPORT_SYMBOL_GPL(of_reset_control_get);
+++ /dev/null
-From 5a819175b911ce33f3337e1e069d4bcea1ec4788 Mon Sep 17 00:00:00 2001
-From: Philipp Zabel <p.zabel@pengutronix.de>
-Date: Thu, 29 Oct 2015 09:55:00 +0100
-Subject: [PATCH] reset: use ENOTSUPP instead of ENOSYS
-
-ENOSYS is reserved to report invalid syscalls to userspace.
-Consistently return ENOTSUPP to indicate that the driver doesn't support
-the functionality or the reset framework is not enabled at all.
-
-Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
----
- drivers/reset/core.c | 8 ++++----
- include/linux/reset.h | 8 ++++----
- 2 files changed, 8 insertions(+), 8 deletions(-)
-
---- a/drivers/reset/core.c
-+++ b/drivers/reset/core.c
-@@ -95,7 +95,7 @@ int reset_control_reset(struct reset_con
- if (rstc->rcdev->ops->reset)
- return rstc->rcdev->ops->reset(rstc->rcdev, rstc->id);
-
-- return -ENOSYS;
-+ return -ENOTSUPP;
- }
- EXPORT_SYMBOL_GPL(reset_control_reset);
-
-@@ -108,7 +108,7 @@ int reset_control_assert(struct reset_co
- if (rstc->rcdev->ops->assert)
- return rstc->rcdev->ops->assert(rstc->rcdev, rstc->id);
-
-- return -ENOSYS;
-+ return -ENOTSUPP;
- }
- EXPORT_SYMBOL_GPL(reset_control_assert);
-
-@@ -121,7 +121,7 @@ int reset_control_deassert(struct reset_
- if (rstc->rcdev->ops->deassert)
- return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->id);
-
-- return -ENOSYS;
-+ return -ENOTSUPP;
- }
- EXPORT_SYMBOL_GPL(reset_control_deassert);
-
-@@ -136,7 +136,7 @@ int reset_control_status(struct reset_co
- if (rstc->rcdev->ops->status)
- return rstc->rcdev->ops->status(rstc->rcdev, rstc->id);
-
-- return -ENOSYS;
-+ return -ENOTSUPP;
- }
- EXPORT_SYMBOL_GPL(reset_control_status);
-
---- a/include/linux/reset.h
-+++ b/include/linux/reset.h
-@@ -74,7 +74,7 @@ static inline void reset_control_put(str
-
- static inline int device_reset_optional(struct device *dev)
- {
-- return -ENOSYS;
-+ return -ENOTSUPP;
- }
-
- static inline struct reset_control *__must_check reset_control_get(
-@@ -94,19 +94,19 @@ static inline struct reset_control *__mu
- static inline struct reset_control *reset_control_get_optional(
- struct device *dev, const char *id)
- {
-- return ERR_PTR(-ENOSYS);
-+ return ERR_PTR(-ENOTSUPP);
- }
-
- static inline struct reset_control *devm_reset_control_get_optional(
- struct device *dev, const char *id)
- {
-- return ERR_PTR(-ENOSYS);
-+ return ERR_PTR(-ENOTSUPP);
- }
-
- static inline struct reset_control *of_reset_control_get(
- struct device_node *node, const char *id)
- {
-- return ERR_PTR(-ENOSYS);
-+ return ERR_PTR(-ENOTSUPP);
- }
-
- static inline struct reset_control *of_reset_control_get_by_index(
+++ /dev/null
-From d25cfe9b4f9663216ce4e011e3f1e7fa669ab58a Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 27 Nov 2015 21:09:05 +0100
-Subject: [PATCH] reset: Add shared reset_control_[de]assert variants
-
-Add reset_control_deassert_shared / reset_control_assert_shared
-functions which are intended for use by drivers for hw blocks which
-(may) share a reset line with another driver / hw block.
-
-Unlike the regular reset_control_[de]assert functions these functions
-keep track of how often deassert_shared / assert_shared have been called
-and keep the line deasserted as long as deassert has been called more
-times than assert.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
-Changes in v2:
--This is a new patch in v2 of this patch-set
----
- drivers/reset/core.c | 121 ++++++++++++++++++++++++++++++++++++---
- include/linux/reset-controller.h | 2 +
- include/linux/reset.h | 2 +
- 3 files changed, 116 insertions(+), 9 deletions(-)
-
---- a/drivers/reset/core.c
-+++ b/drivers/reset/core.c
-@@ -22,16 +22,29 @@ static DEFINE_MUTEX(reset_controller_lis
- static LIST_HEAD(reset_controller_list);
-
- /**
-+ * struct reset_line - a reset line
-+ * @list: list entry for the reset controllers reset line list
-+ * @id: ID of the reset line in the reset controller device
-+ * @refcnt: Number of reset_control structs referencing this device
-+ * @deassert_cnt: Number of times this reset line has been deasserted
-+ */
-+struct reset_line {
-+ struct list_head list;
-+ unsigned int id;
-+ unsigned int refcnt;
-+ unsigned int deassert_cnt;
-+};
-+
-+/**
- * struct reset_control - a reset control
- * @rcdev: a pointer to the reset controller device
- * this reset control belongs to
-- * @id: ID of the reset controller in the reset
-- * controller device
-+ * @line: reset line for this reset control
- */
- struct reset_control {
- struct reset_controller_dev *rcdev;
-+ struct reset_line *line;
- struct device *dev;
-- unsigned int id;
- };
-
- /**
-@@ -66,6 +79,8 @@ int reset_controller_register(struct res
- rcdev->of_xlate = of_reset_simple_xlate;
- }
-
-+ INIT_LIST_HEAD(&rcdev->reset_line_head);
-+
- mutex_lock(&reset_controller_list_mutex);
- list_add(&rcdev->list, &reset_controller_list);
- mutex_unlock(&reset_controller_list_mutex);
-@@ -93,7 +108,7 @@ EXPORT_SYMBOL_GPL(reset_controller_unreg
- int reset_control_reset(struct reset_control *rstc)
- {
- if (rstc->rcdev->ops->reset)
-- return rstc->rcdev->ops->reset(rstc->rcdev, rstc->id);
-+ return rstc->rcdev->ops->reset(rstc->rcdev, rstc->line->id);
-
- return -ENOTSUPP;
- }
-@@ -106,7 +121,7 @@ EXPORT_SYMBOL_GPL(reset_control_reset);
- int reset_control_assert(struct reset_control *rstc)
- {
- if (rstc->rcdev->ops->assert)
-- return rstc->rcdev->ops->assert(rstc->rcdev, rstc->id);
-+ return rstc->rcdev->ops->assert(rstc->rcdev, rstc->line->id);
-
- return -ENOTSUPP;
- }
-@@ -119,13 +134,55 @@ EXPORT_SYMBOL_GPL(reset_control_assert);
- int reset_control_deassert(struct reset_control *rstc)
- {
- if (rstc->rcdev->ops->deassert)
-- return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->id);
-+ return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->line->id);
-
- return -ENOTSUPP;
- }
- EXPORT_SYMBOL_GPL(reset_control_deassert);
-
- /**
-+ * reset_control_assert_shared - asserts a shared reset line
-+ * @rstc: reset controller
-+ *
-+ * Assert a shared reset line, this functions decreases the deassert count
-+ * of the line by one and asserts it if, and only if, the deassert count
-+ * reaches 0.
-+ */
-+int reset_control_assert_shared(struct reset_control *rstc)
-+{
-+ if (!rstc->rcdev->ops->assert)
-+ return -ENOTSUPP;
-+
-+ rstc->line->deassert_cnt--;
-+ if (rstc->line->deassert_cnt)
-+ return 0;
-+
-+ return rstc->rcdev->ops->assert(rstc->rcdev, rstc->line->id);
-+}
-+EXPORT_SYMBOL_GPL(reset_control_assert_shared);
-+
-+/**
-+ * reset_control_deassert_shared - deasserts a shared reset line
-+ * @rstc: reset controller
-+ *
-+ * Assert a shared reset line, this functions increases the deassert count
-+ * of the line by one and deasserts the reset line (if it was not already
-+ * deasserted).
-+ */
-+int reset_control_deassert_shared(struct reset_control *rstc)
-+{
-+ if (!rstc->rcdev->ops->deassert)
-+ return -ENOTSUPP;
-+
-+ rstc->line->deassert_cnt++;
-+ if (rstc->line->deassert_cnt != 1)
-+ return 0;
-+
-+ return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->line->id);
-+}
-+EXPORT_SYMBOL_GPL(reset_control_deassert_shared);
-+
-+/**
- * reset_control_status - returns a negative errno if not supported, a
- * positive value if the reset line is asserted, or zero if the reset
- * line is not asserted.
-@@ -134,12 +191,47 @@ EXPORT_SYMBOL_GPL(reset_control_deassert
- int reset_control_status(struct reset_control *rstc)
- {
- if (rstc->rcdev->ops->status)
-- return rstc->rcdev->ops->status(rstc->rcdev, rstc->id);
-+ return rstc->rcdev->ops->status(rstc->rcdev, rstc->line->id);
-
- return -ENOTSUPP;
- }
- EXPORT_SYMBOL_GPL(reset_control_status);
-
-+static struct reset_line *reset_line_get(struct reset_controller_dev *rcdev,
-+ unsigned int index)
-+{
-+ struct reset_line *line;
-+
-+ list_for_each_entry(line, &rcdev->reset_line_head, list) {
-+ if (line->id == index) {
-+ line->refcnt++;
-+ return line;
-+ }
-+ }
-+
-+ line = kzalloc(sizeof(*line), GFP_KERNEL);
-+ if (!line)
-+ return NULL;
-+
-+ list_add(&line->list, &rcdev->reset_line_head);
-+ line->id = index;
-+ line->refcnt = 1;
-+
-+ return line;
-+}
-+
-+static void reset_line_put(struct reset_line *line)
-+{
-+ if (!line)
-+ return;
-+
-+ if (--line->refcnt)
-+ return;
-+
-+ list_del(&line->list);
-+ kfree(line);
-+}
-+
- /**
- * of_reset_control_get_by_index - Lookup and obtain a reference to a reset
- * controller by index.
-@@ -155,6 +247,7 @@ struct reset_control *of_reset_control_g
- {
- struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER);
- struct reset_controller_dev *r, *rcdev;
-+ struct reset_line *line;
- struct of_phandle_args args;
- int rstc_id;
- int ret;
-@@ -186,16 +279,22 @@ struct reset_control *of_reset_control_g
- }
-
- try_module_get(rcdev->owner);
-+
-+ /* reset_controller_list_mutex also protects the reset_line list */
-+ line = reset_line_get(rcdev, rstc_id);
-+
- mutex_unlock(&reset_controller_list_mutex);
-
- rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
-- if (!rstc) {
-+ if (!line || !rstc) {
-+ kfree(rstc);
-+ reset_line_put(line);
- module_put(rcdev->owner);
- return ERR_PTR(-ENOMEM);
- }
-
- rstc->rcdev = rcdev;
-- rstc->id = rstc_id;
-+ rstc->line = line;
-
- return rstc;
- }
-@@ -259,6 +358,10 @@ void reset_control_put(struct reset_cont
- if (IS_ERR(rstc))
- return;
-
-+ mutex_lock(&reset_controller_list_mutex);
-+ reset_line_put(rstc->line);
-+ mutex_unlock(&reset_controller_list_mutex);
-+
- module_put(rstc->rcdev->owner);
- kfree(rstc);
- }
---- a/include/linux/reset-controller.h
-+++ b/include/linux/reset-controller.h
-@@ -31,6 +31,7 @@ struct of_phandle_args;
- * @ops: a pointer to device specific struct reset_control_ops
- * @owner: kernel module of the reset controller driver
- * @list: internal list of reset controller devices
-+ * @reset_line_head: head of internal list of reset lines
- * @of_node: corresponding device tree node as phandle target
- * @of_reset_n_cells: number of cells in reset line specifiers
- * @of_xlate: translation function to translate from specifier as found in the
-@@ -41,6 +42,7 @@ struct reset_controller_dev {
- struct reset_control_ops *ops;
- struct module *owner;
- struct list_head list;
-+ struct list_head reset_line_head;
- struct device_node *of_node;
- int of_reset_n_cells;
- int (*of_xlate)(struct reset_controller_dev *rcdev,
---- a/include/linux/reset.h
-+++ b/include/linux/reset.h
-@@ -11,6 +11,8 @@ int reset_control_reset(struct reset_con
- int reset_control_assert(struct reset_control *rstc);
- int reset_control_deassert(struct reset_control *rstc);
- int reset_control_status(struct reset_control *rstc);
-+int reset_control_assert_shared(struct reset_control *rstc);
-+int reset_control_deassert_shared(struct reset_control *rstc);
-
- struct reset_control *reset_control_get(struct device *dev, const char *id);
- void reset_control_put(struct reset_control *rstc);
+++ /dev/null
-From 957e8f96c67052ca843ea9ffc5223662b973e5de Mon Sep 17 00:00:00 2001
-From: Reinder de Haan <patchesrdh@mveas.com>
-Date: Sun, 15 Nov 2015 14:24:46 +0100
-Subject: [PATCH] ehci-platform: Add support for controllers with multiple
- reset lines
-
-At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
-reset lines, the controller will not initialize while the reset for
-its companion is still asserted, which means we need to de-assert
-2 resets for the controller to work.
-
-Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
-Changes in v2:
--Use the new reset_control_[de]assert_shared reset-controller functions
----
- Documentation/devicetree/bindings/usb/usb-ehci.txt | 2 +-
- drivers/usb/host/ehci-platform.c | 47 +++++++++++++---------
- 2 files changed, 30 insertions(+), 19 deletions(-)
-
---- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
-+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
-@@ -18,7 +18,7 @@ Optional properties:
- - clocks : a list of phandle + clock specifier pairs
- - phys : phandle + phy specifier pair
- - phy-names : "usb"
-- - resets : phandle + reset specifier pair
-+ - resets : a list of phandle + reset specifier pairs
-
- Example (Sequoia 440EPx):
- ehci@e0000300 {
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -39,11 +39,12 @@
-
- #define DRIVER_DESC "EHCI generic platform driver"
- #define EHCI_MAX_CLKS 3
-+#define EHCI_MAX_RESETS 2
- #define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
-
- struct ehci_platform_priv {
- struct clk *clks[EHCI_MAX_CLKS];
-- struct reset_control *rst;
-+ struct reset_control *resets[EHCI_MAX_RESETS];
- struct phy **phys;
- int num_phys;
- bool reset_on_resume;
-@@ -149,7 +150,7 @@ static int ehci_platform_probe(struct pl
- struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
- struct ehci_platform_priv *priv;
- struct ehci_hcd *ehci;
-- int err, irq, phy_num, clk = 0;
-+ int err, irq, phy_num, clk = 0, rst = 0;
-
- if (usb_disabled())
- return -ENODEV;
-@@ -232,18 +233,24 @@ static int ehci_platform_probe(struct pl
- break;
- }
- }
-- }
-
-- priv->rst = devm_reset_control_get_optional(&dev->dev, NULL);
-- if (IS_ERR(priv->rst)) {
-- err = PTR_ERR(priv->rst);
-- if (err == -EPROBE_DEFER)
-- goto err_put_clks;
-- priv->rst = NULL;
-- } else {
-- err = reset_control_deassert(priv->rst);
-- if (err)
-- goto err_put_clks;
-+ for (rst = 0; rst < EHCI_MAX_RESETS; rst++) {
-+ priv->resets[rst] =
-+ of_reset_control_get_by_index(dev->dev.of_node,
-+ rst);
-+ if (IS_ERR(priv->resets[rst])) {
-+ err = PTR_ERR(priv->resets[rst]);
-+ if (err == -EPROBE_DEFER)
-+ goto err_reset;
-+ priv->resets[rst] = NULL;
-+ break;
-+ }
-+ err = reset_control_deassert_shared(priv->resets[rst]);
-+ if (err) {
-+ reset_control_put(priv->resets[rst]);
-+ goto err_reset;
-+ }
-+ }
- }
-
- if (pdata->big_endian_desc)
-@@ -302,8 +309,10 @@ err_power:
- if (pdata->power_off)
- pdata->power_off(dev);
- err_reset:
-- if (priv->rst)
-- reset_control_assert(priv->rst);
-+ while (--rst >= 0) {
-+ reset_control_assert_shared(priv->resets[rst]);
-+ reset_control_put(priv->resets[rst]);
-+ }
- err_put_clks:
- while (--clk >= 0)
- clk_put(priv->clks[clk]);
-@@ -321,15 +330,17 @@ static int ehci_platform_remove(struct p
- struct usb_hcd *hcd = platform_get_drvdata(dev);
- struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
- struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
-- int clk;
-+ int clk, rst;
-
- usb_remove_hcd(hcd);
-
- if (pdata->power_off)
- pdata->power_off(dev);
-
-- if (priv->rst)
-- reset_control_assert(priv->rst);
-+ for (rst = 0; rst < EHCI_MAX_RESETS && priv->resets[rst]; rst++) {
-+ reset_control_assert_shared(priv->resets[rst]);
-+ reset_control_put(priv->resets[rst]);
-+ }
-
- for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++)
- clk_put(priv->clks[clk]);
+++ /dev/null
-From 5f0c864c1f207dba1db587747a58ec6b362dadf8 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sun, 29 Nov 2015 18:44:14 +0100
-Subject: [PATCH] ohci-platform: Add support for controllers with multiple
- reset lines
-
-At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
-reset lines, the controller will not initialize while the reset for
-its companion is still asserted, which means we need to de-assert
-2 resets for the controller to work.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
-Changes in v2:
--New patch in v2 of this patch-set, to complement the identical patch for
- the ehci-platform code
----
- Documentation/devicetree/bindings/usb/usb-ohci.txt | 2 +-
- drivers/usb/host/ohci-platform.c | 49 +++++++++++++---------
- 2 files changed, 30 insertions(+), 21 deletions(-)
-
---- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
-+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
-@@ -14,7 +14,7 @@ Optional properties:
- - clocks : a list of phandle + clock specifier pairs
- - phys : phandle + phy specifier pair
- - phy-names : "usb"
--- resets : phandle + reset specifier pair
-+- resets : a list of phandle + reset specifier pairs
-
- Example:
-
---- a/drivers/usb/host/ohci-platform.c
-+++ b/drivers/usb/host/ohci-platform.c
-@@ -33,11 +33,12 @@
-
- #define DRIVER_DESC "OHCI generic platform driver"
- #define OHCI_MAX_CLKS 3
-+#define OHCI_MAX_RESETS 2
- #define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
-
- struct ohci_platform_priv {
- struct clk *clks[OHCI_MAX_CLKS];
-- struct reset_control *rst;
-+ struct reset_control *resets[OHCI_MAX_RESETS];
- struct phy **phys;
- int num_phys;
- };
-@@ -117,7 +118,7 @@ static int ohci_platform_probe(struct pl
- struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
- struct ohci_platform_priv *priv;
- struct ohci_hcd *ohci;
-- int err, irq, phy_num, clk = 0;
-+ int err, irq, phy_num, clk = 0, rst = 0;
-
- if (usb_disabled())
- return -ENODEV;
-@@ -195,19 +196,23 @@ static int ohci_platform_probe(struct pl
- break;
- }
- }
--
-- }
--
-- priv->rst = devm_reset_control_get_optional(&dev->dev, NULL);
-- if (IS_ERR(priv->rst)) {
-- err = PTR_ERR(priv->rst);
-- if (err == -EPROBE_DEFER)
-- goto err_put_clks;
-- priv->rst = NULL;
-- } else {
-- err = reset_control_deassert(priv->rst);
-- if (err)
-- goto err_put_clks;
-+ for (rst = 0; rst < OHCI_MAX_RESETS; rst++) {
-+ priv->resets[rst] =
-+ of_reset_control_get_by_index(dev->dev.of_node,
-+ rst);
-+ if (IS_ERR(priv->resets[rst])) {
-+ err = PTR_ERR(priv->resets[rst]);
-+ if (err == -EPROBE_DEFER)
-+ goto err_reset;
-+ priv->resets[rst] = NULL;
-+ break;
-+ }
-+ err = reset_control_deassert_shared(priv->resets[rst]);
-+ if (err) {
-+ reset_control_put(priv->resets[rst]);
-+ goto err_reset;
-+ }
-+ }
- }
-
- if (pdata->big_endian_desc)
-@@ -265,8 +270,10 @@ err_power:
- if (pdata->power_off)
- pdata->power_off(dev);
- err_reset:
-- if (priv->rst)
-- reset_control_assert(priv->rst);
-+ while (--rst >= 0) {
-+ reset_control_assert_shared(priv->resets[rst]);
-+ reset_control_put(priv->resets[rst]);
-+ }
- err_put_clks:
- while (--clk >= 0)
- clk_put(priv->clks[clk]);
-@@ -284,15 +291,17 @@ static int ohci_platform_remove(struct p
- struct usb_hcd *hcd = platform_get_drvdata(dev);
- struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
- struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
-- int clk;
-+ int clk, rst;
-
- usb_remove_hcd(hcd);
-
- if (pdata->power_off)
- pdata->power_off(dev);
-
-- if (priv->rst)
-- reset_control_assert(priv->rst);
-+ for (rst = 0; rst < OHCI_MAX_RESETS && priv->resets[rst]; rst++) {
-+ reset_control_assert_shared(priv->resets[rst]);
-+ reset_control_put(priv->resets[rst]);
-+ }
-
- for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++)
- clk_put(priv->clks[clk]);
+++ /dev/null
-From 5296d8ff65298091758aa8d50d00539cd3781042 Mon Sep 17 00:00:00 2001
-From: Jelle van der Waa <jelle@vdwaa.nl>
-Date: Sun, 9 Aug 2015 18:51:22 +0200
-Subject: [PATCH] ARM: dts: sun7i: Enable audio codec on pcDuino
-
-Enable the on-chip audio codec
-
-Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
-@@ -111,6 +111,11 @@
- allwinner,pins = "PH2";
- };
-
-+
-+&codec {
-+ status = "okay";
-+};
-+
- &cpu0 {
- cpu-supply = <®_dcdc2>;
- };
+++ /dev/null
-From 46662c86b453d7098ff22d6112d0481f07d523a1 Mon Sep 17 00:00:00 2001
-From: Jelle de Jong <jelledejong@powercraft.nl>
-Date: Sun, 18 Oct 2015 16:34:39 +0200
-Subject: [PATCH] ARM: dts: sun7i: Add dts file for the lamobo-r1 board
-
-The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such
-on the PCB, is meant as a A20 based router board. As such the board comes
-with a built-in switch chip giving it 5 gigabit ethernet boards, and it
-has a large empty area on the pcb with mounting holes which will fit a
-2.5 inch harddisk. To complete its networking features it has a
-Realtek RTL8192CU for WiFi 802.11 b/g/n.
-
-Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 297 ++++++++++++++++++++++++++++++
- 2 files changed, 298 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -638,6 +638,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
- sun7i-a20-cubietruck.dtb \
- sun7i-a20-hummingbird.dtb \
- sun7i-a20-i12-tvbox.dtb \
-+ sun7i-a20-lamobo-r1.dtb \
- sun7i-a20-m3.dtb \
- sun7i-a20-mk808c.dtb \
- sun7i-a20-olimex-som-evb.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
-@@ -0,0 +1,297 @@
-+/*
-+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun7i-a20.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+ model = "Lamobo R1";
-+ compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ serial1 = &uart3;
-+ serial2 = &uart7;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_pins_lamobo_r1>;
-+
-+ green {
-+ label = "lamobo_r1:green:usr";
-+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ reg_gmac_3v3: gmac-3v3 {
-+ compatible = "regulator-fixed";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_power_pin_lamobo_r1>;
-+ regulator-name = "gmac-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ startup-delay-us = <100000>;
-+ enable-active-high;
-+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
-+ };
-+};
-+
-+&ahci_pwr_pin_a {
-+ allwinner,pins = "PB3";
-+};
-+
-+&ahci {
-+ target-supply = <®_ahci_5v>;
-+ status = "okay";
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_dcdc2>;
-+ operating-points = <
-+ /* kHz uV */
-+ 960000 1400000
-+ 912000 1400000
-+ 864000 1350000
-+ 720000 1250000
-+ 528000 1150000
-+ 312000 1100000
-+ 144000 1050000
-+ >;
-+};
-+
-+&ehci0 {
-+ status = "okay";
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&gmac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_pins_rgmii_a>;
-+ phy = <&phy1>;
-+ phy-mode = "rgmii";
-+ phy-supply = <®_gmac_3v3>;
-+ status = "okay";
-+
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+};
-+
-+&i2c0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+
-+ axp209: pmic@34 {
-+ reg = <0x34>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ };
-+};
-+
-+&i2c2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c2_pins_a>;
-+ status = "okay";
-+};
-+
-+&ir0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ir0_rx_pins_a>;
-+ status = "okay";
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
-+ vmmc-supply = <®_vcc3v3>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-+ cd-inverted;
-+ status = "okay";
-+};
-+
-+&ohci0 {
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&otg_sram {
-+ status = "okay";
-+};
-+
-+&pio {
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
-+ mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
-+ allwinner,pins = "PH10";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
-+ gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
-+ allwinner,pins = "PH23";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ led_pins_lamobo_r1: led_pins@0 {
-+ allwinner,pins = "PH24";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+};
-+
-+#include "axp209.dtsi"
-+
-+®_ahci_5v {
-+ gpio = <&pio 1 3 0>; /* PB3 */
-+ status = "okay";
-+};
-+
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-int-dll";
-+};
-+
-+®_ldo1 {
-+ regulator-name = "vdd-rtc";
-+};
-+
-+®_ldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "avcc";
-+};
-+
-+®_usb0_vbus {
-+ status = "okay";
-+};
-+
-+®_usb1_vbus {
-+ status = "okay";
-+};
-+
-+®_usb2_vbus {
-+ status = "okay";
-+};
-+
-+&spi0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi0_pins_a>,
-+ <&spi0_cs0_pins_a>,
-+ <&spi0_cs1_pins_a>;
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+};
-+
-+&uart3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart3_pins_b>;
-+ status = "okay";
-+};
-+
-+&uart7 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart7_pins_a>;
-+ status = "okay";
-+};
-+
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
-+&usb_power_supply {
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>;
-+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+ usb0_vbus_power-supply = <&usb_power_supply>;
-+ usb0_vbus-supply = <®_usb0_vbus>;
-+ usb1_vbus-supply = <®_usb1_vbus>;
-+ usb2_vbus-supply = <®_usb2_vbus>;
-+ status = "okay";
-+};
projects / openwrt / staging / kaloz.git / commitdiff