The GL.iNet GL-AR300M series of devices includes variants without NAND
and only the 16 MB NOR flash. These include the GL-AR300M16 and the
GL-AR300M-Lite (already with its own board name).
This board-name addition provides disambiguation from the NAND-bearing
GL-AR300M devices, both for OpenWrt code and for end users.
Kernel and firmware support for NAND and UBI will add ~320 kB to the
overall firmware size at this time. This NOR-only option continues to
provide more compact firmware for both the GL-AR300M16 as well as
those who wish to use it as an alternate or primary, NOR-resident
firmware on the GL-AR300M.
The ar71xx targets are unmodified.
Installation
------------
Install through OEM U-Boot (HTTP-based) or `sysupgrade --force` when
booted from NOR and running OEM or OpenWrt, NOR-based firmware.
As one of the intentions is disambiguation from NAND-bearing units,
users who have flashed this firmware onto a device with NAND would
need to use U-Boot or `sysupgrade --force` to flash firmware that
again supports NAND.
There are no additional SUPPORTED_DEVICES as it is not possible to
determine if a device does or does not have NAND based on
either the OEM's or OpenWrt's board names prior to this patch.
Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
glinet,gl-ar300m-lite|\
glinet,gl-ar300m-nand|\
glinet,gl-ar300m-nor|\
+glinet,gl-ar300m16|\
librerouter,librerouter-v1|\
netgear,ex6400|\
netgear,ex7300|\
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "qca9531_glinet_gl-ar300m.dtsi"
+
+/ {
+ compatible = "glinet,gl-ar300m16", "qca,qca9531";
+ model = "GL.iNet GL-AR300M16";
+};
+
+/delete-node/ &nand_flash;
glinet,gl-ar300m-lite)
ucidef_set_led_netdev "lan" "LAN" "gl-ar300m-lite:green:lan" "eth0"
;;
+glinet,gl-ar300m16)
+ ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0"
+ ;;
glinet,gl-x750)
ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
;;
endef
TARGET_DEVICES += glinet_gl-ar300m-lite
+define Device/glinet_gl-ar300m16
+ $(Device/glinet_gl-ar300m-common-nor)
+ DEVICE_MODEL := GL-AR300M16
+endef
+TARGET_DEVICES += glinet_gl-ar300m16
+
define Device/glinet_gl-ar750
ATH_SOC := qca9531
DEVICE_VENDOR := GL.iNet