[kernel] update to 2.6.39.1

patch from Peter Wagner

SVN-Revision: 27104

diff --git a/include/kernel-version.mk b/include/kernel-version.mk
index 9b60d4396b4189ac35de86abb141033637bc2750..4ce67718379f5bd040201635ae3b7a8ba2e122ae 100644 (file)
--- a/include/kernel-version.mk
+++ b/include/kernel-version.mk
@@ -26,8 +26,8 @@ endif
 ifeq ($(LINUX_VERSION),2.6.38.6)
   LINUX_KERNEL_MD5SUM:=e896a3bb3185b8a8af8e2f010f63c02e
 endif
-ifeq ($(LINUX_VERSION),2.6.39)
-  LINUX_KERNEL_MD5SUM:=1aab7a741abe08d42e8eccf20de61e05
+ifeq ($(LINUX_VERSION),2.6.39.1)
+  LINUX_KERNEL_MD5SUM:=983834b0138e102a3fb0098367c17150
 endif
 
 # disable the md5sum check for unknown kernel versions

diff --git a/target/linux/au1000/Makefile b/target/linux/au1000/Makefile
index f90116fe781f135b2c386ea59b98d11598b75e9a..bc628728cb207a366e16cbe3cd0d45e2dad5dddb 100644 (file)
--- a/target/linux/au1000/Makefile
+++ b/target/linux/au1000/Makefile
@@ -13,7 +13,7 @@ FEATURES:=jffs2 usb pci
 SUBTARGETS=au1500 au1550
 MAINTAINER:=Florian Fainelli <florian@openwrt.org>
 
-LINUX_VERSION:=2.6.39
+LINUX_VERSION:=2.6.39.1
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += wpad-mini yamonenv

diff --git a/target/linux/au1000/patches-2.6.39/002-openwrt_rootfs.patch b/target/linux/au1000/patches-2.6.39/002-openwrt_rootfs.patch
index e1056e93d9c77dd80ba7f40241d04fc294283115..7d34a314d6bec51ff097ec64e007523c7d73baf4 100644 (file)
--- a/target/linux/au1000/patches-2.6.39/002-openwrt_rootfs.patch
+++ b/target/linux/au1000/patches-2.6.39/002-openwrt_rootfs.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/alchemy/mtx-1/platform.c
 +++ b/arch/mips/alchemy/mtx-1/platform.c
-@@ -90,7 +90,7 @@ static struct platform_device mtx1_gpio_
+@@ -92,7 +92,7 @@ static struct platform_device mtx1_gpio_
  
  static struct mtd_partition mtx1_mtd_partitions[] = {
        {

diff --git a/target/linux/au1000/patches-2.6.39/003-au1000_eth_ioctl.patch b/target/linux/au1000/patches-2.6.39/003-au1000_eth_ioctl.patch
index c005cbc16dfd586f7d09f3fc269a407a86261c22..1bf875417213521aec5c4502cf4400cacb592bb2 100644 (file)
--- a/target/linux/au1000/patches-2.6.39/003-au1000_eth_ioctl.patch
+++ b/target/linux/au1000/patches-2.6.39/003-au1000_eth_ioctl.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/au1000_eth.c
 +++ b/drivers/net/au1000_eth.c
-@@ -995,10 +995,14 @@ static void au1000_multicast_list(struct
+@@ -993,10 +993,14 @@ static void au1000_multicast_list(struct
        writel(reg, &aup->mac->control);
  }
  

diff --git a/target/linux/cns3xxx/Makefile b/target/linux/cns3xxx/Makefile
index 86ca83a54ec7665087d10bbf376821270ba7977c..f52de27034c903aa66ecae7dbe55552323d2578e 100644 (file)
--- a/target/linux/cns3xxx/Makefile
+++ b/target/linux/cns3xxx/Makefile
@@ -13,7 +13,7 @@ FEATURES:=squashfs fpu gpio
 CFLAGS:=-Os -pipe -march=armv6k -mtune=mpcore -mfloat-abi=softfp -mfpu=vfp -fno-caller-saves
 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
 
-LINUX_VERSION:=2.6.39
+LINUX_VERSION:=2.6.39.1
 
 include $(INCLUDE_DIR)/target.mk
 

diff --git a/target/linux/generic/patches-2.6.39/474-mtd_concat_sync_fix.patch b/target/linux/generic/patches-2.6.39/474-mtd_concat_sync_fix.patch
index 4e3426b7bdb4f9380b2bfbcdbf683cd6e6eb505e..ff3759e220856c3c6f8c1cc50330a343501086fd 100644 (file)
--- a/target/linux/generic/patches-2.6.39/474-mtd_concat_sync_fix.patch
+++ b/target/linux/generic/patches-2.6.39/474-mtd_concat_sync_fix.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/mtdconcat.c
 +++ b/drivers/mtd/mtdconcat.c
-@@ -619,7 +619,8 @@ static void concat_sync(struct mtd_info 
+@@ -619,7 +619,8 @@ static void concat_sync(struct mtd_info
  
        for (i = 0; i < concat->num_subdev; i++) {
                struct mtd_info *subdev = concat->subdev[i];

diff --git a/target/linux/generic/patches-2.6.39/950-vm_exports.patch b/target/linux/generic/patches-2.6.39/950-vm_exports.patch
index 874b810415155a11e71850041ddfbb18f9e1c472..26b2da93acc34fe5113a8aa3658344090b74d144 100644 (file)
--- a/target/linux/generic/patches-2.6.39/950-vm_exports.patch
+++ b/target/linux/generic/patches-2.6.39/950-vm_exports.patch
@@ -1,6 +1,6 @@
 --- a/mm/shmem.c
 +++ b/mm/shmem.c
-@@ -2730,6 +2730,16 @@ out:
+@@ -2731,6 +2731,16 @@ out:
  
  /* common code */
  
@@ -17,7 +17,7 @@
  /**
   * shmem_file_setup - get an unlinked file living in tmpfs
   * @name: name for dentry (to be seen in /proc/<pid>/maps
-@@ -2807,10 +2817,7 @@ int shmem_zero_setup(struct vm_area_stru
+@@ -2808,10 +2818,7 @@ int shmem_zero_setup(struct vm_area_stru
        if (IS_ERR(file))
                return PTR_ERR(file);
  

diff --git a/target/linux/lantiq/Makefile b/target/linux/lantiq/Makefile
index 412b7b19c66ed3ac83e4696bf1b0c80391f5694c..29da8a3c682cf6b63561e5f125905ad1a118748f 100644 (file)
--- a/target/linux/lantiq/Makefile
+++ b/target/linux/lantiq/Makefile
@@ -12,8 +12,7 @@ BOARDNAME:=Lantiq GPON/XWAY
 FEATURES:=squashfs jffs2
 SUBTARGETS:=falcon xway ase
 
-LINUX_VERSION:=2.6.39
-#LINUX_VERSION:=2.6.32.33
+LINUX_VERSION:=2.6.39.1
 
 CFLAGS=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves
 

diff --git a/target/linux/lantiq/patches-2.6.39/0001-MIPS-Lantiq-Add-initial-support-for-Lantiq-SoCs.patch b/target/linux/lantiq/patches-2.6.39/0001-MIPS-Lantiq-Add-initial-support-for-Lantiq-SoCs.patch
index c7f96cdd381c694f1d38ef84231c389ba65716d3..7eecefcc1bada8ec3254e2ae2e6f330b8b91e924 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/0001-MIPS-Lantiq-Add-initial-support-for-Lantiq-SoCs.patch
+++ b/target/linux/lantiq/patches-2.6.39/0001-MIPS-Lantiq-Add-initial-support-for-Lantiq-SoCs.patch
@@ -48,7 +48,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -212,6 +212,23 @@
+@@ -212,6 +212,23 @@ config MACH_JZ4740
        select HAVE_PWM
        select HAVE_CLK
  
@@ -884,7 +884,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 +}
 --- a/arch/mips/Kbuild.platforms
 +++ b/arch/mips/Kbuild.platforms
-@@ -11,6 +11,7 @@
+@@ -11,6 +11,7 @@ platforms += dec
  platforms += emma
  platforms += jazz
  platforms += jz4740

diff --git a/target/linux/lantiq/patches-2.6.39/0002-MIPS-Lantiq-add-SoC-specific-code-for-XWAY-family.patch b/target/linux/lantiq/patches-2.6.39/0002-MIPS-Lantiq-add-SoC-specific-code-for-XWAY-family.patch
index 2f44b6659d7a2925ae4240b3e0b37ce1bdc803b6..8f5f929128768750426f6de8455ff8bfa7ea9c3b 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/0002-MIPS-Lantiq-add-SoC-specific-code-for-XWAY-family.patch
+++ b/target/linux/lantiq/patches-2.6.39/0002-MIPS-Lantiq-add-SoC-specific-code-for-XWAY-family.patch
@@ -65,7 +65,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -760,6 +760,7 @@
+@@ -760,6 +760,7 @@ source "arch/mips/ath79/Kconfig"
  source "arch/mips/bcm63xx/Kconfig"
  source "arch/mips/jazz/Kconfig"
  source "arch/mips/jz4740/Kconfig"

diff --git a/target/linux/lantiq/patches-2.6.39/0003-MIPS-Lantiq-Add-PCI-controller-support.patch b/target/linux/lantiq/patches-2.6.39/0003-MIPS-Lantiq-Add-PCI-controller-support.patch
index 1757266f910cf5317bd7d3f8af00e2825cd51162..49cbc9b61a988ecf6ffeb23408171b7a6c558a5d 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/0003-MIPS-Lantiq-Add-PCI-controller-support.patch
+++ b/target/linux/lantiq/patches-2.6.39/0003-MIPS-Lantiq-Add-PCI-controller-support.patch
@@ -28,9 +28,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  create mode 100644 arch/mips/pci/pci-lantiq.c
  create mode 100644 arch/mips/pci/pci-lantiq.h
 
-diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
-new file mode 100644
-index 0000000..1f1dba6
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
 @@ -0,0 +1,46 @@
@@ -80,11 +77,9 @@ index 0000000..1f1dba6
 +};
 +
 +#endif
-diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
-index f0d5329..4df8799 100644
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_SB1250)  += fixup-sb1250.o pci-sb1250.o
+@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_SB1250)  += fixup-sb1
  obj-$(CONFIG_SIBYTE_BCM112X)  += fixup-sb1250.o pci-sb1250.o
  obj-$(CONFIG_SIBYTE_BCM1x80)  += pci-bcm1480.o pci-bcm1480ht.o
  obj-$(CONFIG_SNI_RM)          += fixup-sni.o ops-sni.o
@@ -92,9 +87,6 @@ index f0d5329..4df8799 100644
  obj-$(CONFIG_TANBAC_TB0219)   += fixup-tb0219.o
  obj-$(CONFIG_TANBAC_TB0226)   += fixup-tb0226.o
  obj-$(CONFIG_TANBAC_TB0287)   += fixup-tb0287.o
-diff --git a/arch/mips/pci/ops-lantiq.c b/arch/mips/pci/ops-lantiq.c
-new file mode 100644
-index 0000000..1f2afb5
 --- /dev/null
 +++ b/arch/mips/pci/ops-lantiq.c
 @@ -0,0 +1,116 @@
@@ -214,9 +206,6 @@ index 0000000..1f2afb5
 +
 +      return PCIBIOS_SUCCESSFUL;
 +}
-diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
-new file mode 100644
-index 0000000..603d749
 --- /dev/null
 +++ b/arch/mips/pci/pci-lantiq.c
 @@ -0,0 +1,297 @@
@@ -517,9 +506,6 @@ index 0000000..603d749
 +}
 +
 +arch_initcall(pcibios_init);
-diff --git a/arch/mips/pci/pci-lantiq.h b/arch/mips/pci/pci-lantiq.h
-new file mode 100644
-index 0000000..66bf6cd
 --- /dev/null
 +++ b/arch/mips/pci/pci-lantiq.h
 @@ -0,0 +1,18 @@
@@ -541,6 +527,3 @@ index 0000000..66bf6cd
 +      unsigned int devfn, int where, int size, u32 val);
 +
 +#endif
--- 
-1.7.2.3
-

diff --git a/target/linux/lantiq/patches-2.6.39/0004-MIPS-Lantiq-Add-NOR-flash-support.patch b/target/linux/lantiq/patches-2.6.39/0004-MIPS-Lantiq-Add-NOR-flash-support.patch
index 80efc1f4cb1c260c025aded3ecb5f253af314345..212a02077052119b820a7d5622d8df390a9f4510 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/0004-MIPS-Lantiq-Add-NOR-flash-support.patch
+++ b/target/linux/lantiq/patches-2.6.39/0004-MIPS-Lantiq-Add-NOR-flash-support.patch
@@ -24,7 +24,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 
 --- a/drivers/mtd/maps/Kconfig
 +++ b/drivers/mtd/maps/Kconfig
-@@ -260,6 +260,13 @@
+@@ -260,6 +260,13 @@ config MTD_BCM963XX
          Support for parsing CFE image tag and creating MTD partitions on
          Broadcom BCM63xx boards.
  
@@ -40,7 +40,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
        depends on X86 && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
 --- a/drivers/mtd/maps/Makefile
 +++ b/drivers/mtd/maps/Makefile
-@@ -60,3 +60,4 @@
+@@ -60,3 +60,4 @@ obj-$(CONFIG_MTD_VMU)                += vmu-flash.o
  obj-$(CONFIG_MTD_GPIO_ADDR)   += gpio-addr-flash.o
  obj-$(CONFIG_MTD_BCM963XX)    += bcm963xx-flash.o
  obj-$(CONFIG_MTD_LATCH_ADDR)  += latch-addr-flash.o

diff --git a/target/linux/lantiq/patches-2.6.39/0005-MIPS-Lantiq-Add-platform-device-support.patch b/target/linux/lantiq/patches-2.6.39/0005-MIPS-Lantiq-Add-platform-device-support.patch
index 917993fdbac3791f558e58fc981efef31b12842c..ff376ea21a04955d5303b881f55a0b2560db3d1b 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/0005-MIPS-Lantiq-Add-platform-device-support.patch
+++ b/target/linux/lantiq/patches-2.6.39/0005-MIPS-Lantiq-Add-platform-device-support.patch
@@ -25,8 +25,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  create mode 100644 arch/mips/lantiq/xway/devices.c
  create mode 100644 arch/mips/lantiq/xway/devices.h
 
-diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile
-index a268391..e5dae0e 100644
 --- a/arch/mips/lantiq/Makefile
 +++ b/arch/mips/lantiq/Makefile
 @@ -4,7 +4,7 @@
@@ -38,9 +36,6 @@ index a268391..e5dae0e 100644
  
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
  
-diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c
-new file mode 100644
-index 0000000..7b82c34
 --- /dev/null
 +++ b/arch/mips/lantiq/devices.c
 @@ -0,0 +1,122 @@
@@ -166,9 +161,6 @@ index 0000000..7b82c34
 +      pr_err("kernel is compiled without PCI support\n");
 +}
 +#endif
-diff --git a/arch/mips/lantiq/devices.h b/arch/mips/lantiq/devices.h
-new file mode 100644
-index 0000000..2947bb1
 --- /dev/null
 +++ b/arch/mips/lantiq/devices.h
 @@ -0,0 +1,23 @@
@@ -195,8 +187,6 @@ index 0000000..2947bb1
 +extern void ltq_register_pci(struct ltq_pci_data *data);
 +
 +#endif
-diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
-index 9c85ff9..74ce438 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
 @@ -1,4 +1,4 @@
@@ -205,9 +195,6 @@ index 9c85ff9..74ce438 100644
  
  obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o
  obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o
-diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
-new file mode 100644
-index 0000000..a71b3b5
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/devices.c
 @@ -0,0 +1,98 @@
@@ -309,9 +296,6 @@ index 0000000..a71b3b5
 +      platform_device_register_simple("ltq_asc", 0,
 +              ltq_ase_asc_resources, ARRAY_SIZE(ltq_ase_asc_resources));
 +}
-diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h
-new file mode 100644
-index 0000000..51f56b5
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/devices.h
 @@ -0,0 +1,18 @@
@@ -333,6 +317,3 @@ index 0000000..51f56b5
 +extern void ltq_register_ase_asc(void);
 +
 +#endif
--- 
-1.7.2.3
-

diff --git a/target/linux/lantiq/patches-2.6.39/0006-MIPS-Lantiq-Add-mips_machine-support.patch b/target/linux/lantiq/patches-2.6.39/0006-MIPS-Lantiq-Add-mips_machine-support.patch
index 9e02b6a6c52039998badd103fe6a3f01618ff163..0c1c0e778c2480c0633af0500bedbb7f6490c2b1 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/0006-MIPS-Lantiq-Add-mips_machine-support.patch
+++ b/target/linux/lantiq/patches-2.6.39/0006-MIPS-Lantiq-Add-mips_machine-support.patch
@@ -27,7 +27,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -190,6 +190,7 @@
+@@ -228,6 +228,7 @@ config LANTIQ
        select SWAP_IO_SPACE
        select BOOT_RAW
        select HAVE_CLK
@@ -58,7 +58,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 +#endif
 --- a/arch/mips/lantiq/prom.h
 +++ b/arch/mips/lantiq/prom.h
-@@ -20,5 +20,6 @@
+@@ -20,5 +20,6 @@ struct ltq_soc_info {
  };
  
  extern void ltq_soc_detect(struct ltq_soc_info *i);
@@ -80,7 +80,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  void __init plat_mem_setup(void)
  {
        /* assume 16M as default incase uboot fails to pass proper ramsize */
-@@ -32,10 +38,32 @@
+@@ -32,10 +38,32 @@ void __init plat_mem_setup(void)
                if (!strncmp(e, "memsize=", 8)) {
                        e += 8;
                        if (strict_strtoul(e, 0, &memsize))

diff --git a/target/linux/lantiq/patches-2.6.39/0007-MIPS-Lantiq-Add-machtypes-for-lantiq-eval-kits.patch b/target/linux/lantiq/patches-2.6.39/0007-MIPS-Lantiq-Add-machtypes-for-lantiq-eval-kits.patch
index e69558c564e52c45e1b2dcff2ee20574d94fb755..9d4b5bc7b9116b17aa3613c2307babe7c0d1043f 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/0007-MIPS-Lantiq-Add-machtypes-for-lantiq-eval-kits.patch
+++ b/target/linux/lantiq/patches-2.6.39/0007-MIPS-Lantiq-Add-machtypes-for-lantiq-eval-kits.patch
@@ -24,8 +24,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  create mode 100644 arch/mips/lantiq/xway/mach-easy50601.c
  create mode 100644 arch/mips/lantiq/xway/mach-easy50712.c
 
-diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
-index 2780461..3fccf21 100644
 --- a/arch/mips/lantiq/Kconfig
 +++ b/arch/mips/lantiq/Kconfig
 @@ -18,4 +18,6 @@ config SOC_XWAY
@@ -35,8 +33,6 @@ index 2780461..3fccf21 100644
 +source "arch/mips/lantiq/xway/Kconfig"
 +
  endif
-diff --git a/arch/mips/lantiq/machtypes.h b/arch/mips/lantiq/machtypes.h
-index ffcacfc..7e01b8c 100644
 --- a/arch/mips/lantiq/machtypes.h
 +++ b/arch/mips/lantiq/machtypes.h
 @@ -13,6 +13,8 @@
@@ -48,9 +44,6 @@ index ffcacfc..7e01b8c 100644
  };
  
  #endif
-diff --git a/arch/mips/lantiq/xway/Kconfig b/arch/mips/lantiq/xway/Kconfig
-new file mode 100644
-index 0000000..2b857de
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/Kconfig
 @@ -0,0 +1,23 @@
@@ -77,20 +70,15 @@ index 0000000..2b857de
 +endmenu
 +
 +endif
-diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
-index 8c06a97..b1d3640 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
-@@ -2,3 +2,6 @@ obj-y := pmu.o ebu.o reset.o gpio.o devices.o
+@@ -2,3 +2,6 @@ obj-y := pmu.o ebu.o reset.o gpio.o devi
  
  obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
  obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
 +
 +obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
 +obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
-diff --git a/arch/mips/lantiq/xway/mach-easy50601.c b/arch/mips/lantiq/xway/mach-easy50601.c
-new file mode 100644
-index 0000000..d5aaf63
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/mach-easy50601.c
 @@ -0,0 +1,57 @@
@@ -151,9 +139,6 @@ index 0000000..d5aaf63
 +                      "EASY50601",
 +                      "EASY50601 Eval Board",
 +                      easy50601_init);
-diff --git a/arch/mips/lantiq/xway/mach-easy50712.c b/arch/mips/lantiq/xway/mach-easy50712.c
-new file mode 100644
-index 0000000..e5e7e09
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/mach-easy50712.c
 @@ -0,0 +1,68 @@
@@ -225,6 +210,3 @@ index 0000000..e5e7e09
 +           "EASY50712",
 +           "EASY50712 Eval Board",
 +            easy50712_init);
--- 
-1.7.2.3
-

diff --git a/target/linux/lantiq/patches-2.6.39/0008-MIPS-Lantiq-Add-more-gpio-drivers.patch b/target/linux/lantiq/patches-2.6.39/0008-MIPS-Lantiq-Add-more-gpio-drivers.patch
index 2daa9e0fe2c23bfdacacb670993025b52b5d0fe8..810c89d9623446f6a3ed227d51bd1c511e3fcfc7 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/0008-MIPS-Lantiq-Add-more-gpio-drivers.patch
+++ b/target/linux/lantiq/patches-2.6.39/0008-MIPS-Lantiq-Add-more-gpio-drivers.patch
@@ -20,8 +20,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  create mode 100644 arch/mips/lantiq/xway/gpio_ebu.c
  create mode 100644 arch/mips/lantiq/xway/gpio_stp.c
 
-diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
-index b1d3640..6b5e07e 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
 @@ -1,4 +1,4 @@
@@ -30,9 +28,6 @@ index b1d3640..6b5e07e 100644
  
  obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
  obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
-diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
-new file mode 100644
-index 0000000..a479355
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/gpio_ebu.c
 @@ -0,0 +1,126 @@
@@ -162,9 +157,6 @@ index 0000000..a479355
 +}
 +
 +postcore_initcall(ltq_ebu_init);
-diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
-new file mode 100644
-index 0000000..67d59d6
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/gpio_stp.c
 @@ -0,0 +1,157 @@
@@ -325,6 +317,3 @@ index 0000000..67d59d6
 +}
 +
 +postcore_initcall(ltq_stp_init);
--- 
-1.7.2.3
-

diff --git a/target/linux/lantiq/patches-2.6.39/0009-SERIAL-Lantiq-Add-driver-for-MIPS-Lantiq-SOCs.patch b/target/linux/lantiq/patches-2.6.39/0009-SERIAL-Lantiq-Add-driver-for-MIPS-Lantiq-SOCs.patch
index 4877878b20b6d24473c17605dee9b035e4b8eb4b..223621edf65c544de6eed9a3cc2f0dc94fcb8943 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/0009-SERIAL-Lantiq-Add-driver-for-MIPS-Lantiq-SOCs.patch
+++ b/target/linux/lantiq/patches-2.6.39/0009-SERIAL-Lantiq-Add-driver-for-MIPS-Lantiq-SOCs.patch
@@ -780,7 +780,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 +MODULE_LICENSE("GPL");
 --- a/drivers/tty/serial/Kconfig
 +++ b/drivers/tty/serial/Kconfig
-@@ -1391,6 +1391,14 @@
+@@ -1391,6 +1391,14 @@ config SERIAL_OF_PLATFORM_NWPSERIAL_CONS
        help
          Support for Console on the NWP serial ports.
  
@@ -797,7 +797,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
        depends on QUICC_ENGINE
 --- a/drivers/tty/serial/Makefile
 +++ b/drivers/tty/serial/Makefile
-@@ -94,3 +94,4 @@
+@@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_IFX6X60)         += ifx6x6
  obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
  obj-$(CONFIG_SERIAL_MSM_SMD)  += msm_smd_tty.o
  obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o

diff --git a/target/linux/lantiq/patches-2.6.39/0010-MIPS-Lantiq-Add-DMA-support.patch b/target/linux/lantiq/patches-2.6.39/0010-MIPS-Lantiq-Add-DMA-support.patch
index fd9981a6a2110935bd1deaa4ed9a5d62e1044e1f..7e230538618242f5a4bb877aca3515b0ce5e730d 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/0010-MIPS-Lantiq-Add-DMA-support.patch
+++ b/target/linux/lantiq/patches-2.6.39/0010-MIPS-Lantiq-Add-DMA-support.patch
@@ -21,8 +21,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  create mode 100644 arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
  create mode 100644 arch/mips/lantiq/xway/dma.c
 
-diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-index 343e82c..4827afb 100644
 --- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
 +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
 @@ -86,7 +86,8 @@
@@ -35,9 +33,6 @@ index 343e82c..4827afb 100644
  
  /* PCI */
  #define PCI_CR_BASE_ADDR      0x1E105400
-diff --git a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
-new file mode 100644
-index 0000000..872943a
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
 @@ -0,0 +1,60 @@
@@ -101,8 +96,6 @@ index 0000000..872943a
 +extern void ltq_dma_init_port(int p);
 +
 +#endif
-diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
-index 6b5e07e..c517f2e 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
 @@ -1,4 +1,4 @@
@@ -111,8 +104,6 @@ index 6b5e07e..c517f2e 100644
  
  obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
  obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
-diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h
-index 51f56b5..d573084 100644
 --- a/arch/mips/lantiq/xway/devices.h
 +++ b/arch/mips/lantiq/xway/devices.h
 @@ -10,6 +10,7 @@
@@ -123,9 +114,6 @@ index 51f56b5..d573084 100644
  
  extern void ltq_register_gpio(void);
  extern void ltq_register_gpio_stp(void);
-diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
-new file mode 100644
-index 0000000..4278a45
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/dma.c
 @@ -0,0 +1,253 @@
@@ -382,6 +370,3 @@ index 0000000..4278a45
 +}
 +
 +postcore_initcall(ltq_dma_init);
--- 
-1.7.2.3
-

diff --git a/target/linux/lantiq/patches-2.6.39/0011-MIPS-Lantiq-Add-ethernet-driver.patch b/target/linux/lantiq/patches-2.6.39/0011-MIPS-Lantiq-Add-ethernet-driver.patch
index eac20d7e396564f101838a4f4b3602a55b11ca6a..94100d0247250abe89d8aeee1e18897016682c91 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/0011-MIPS-Lantiq-Add-ethernet-driver.patch
+++ b/target/linux/lantiq/patches-2.6.39/0011-MIPS-Lantiq-Add-ethernet-driver.patch
@@ -36,7 +36,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  
  /* struct used to pass info to the pci core */
  enum {
-@@ -43,4 +44,10 @@
+@@ -43,4 +44,10 @@ struct ltq_pci_data {
        int irq[16];
  };
  
@@ -62,7 +62,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  #define LTQ_DMA_BASE_ADDR     0x1E104100
 --- a/arch/mips/lantiq/xway/devices.c
 +++ b/arch/mips/lantiq/xway/devices.c
-@@ -96,3 +96,26 @@
+@@ -96,3 +96,26 @@ void __init ltq_register_ase_asc(void)
        platform_device_register_simple("ltq_asc", 0,
                ltq_ase_asc_resources, ARRAY_SIZE(ltq_ase_asc_resources));
  }
@@ -100,7 +100,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  #endif
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -2017,6 +2017,13 @@
+@@ -2017,6 +2017,13 @@ config FTMAC100
          from Faraday. It is used on Faraday A320, Andes AG101 and some
          other ARM/NDS32 SoC's.
  
@@ -116,7 +116,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  source "drivers/net/octeon/Kconfig"
 --- a/drivers/net/Makefile
 +++ b/drivers/net/Makefile
-@@ -259,6 +259,7 @@
+@@ -259,6 +259,7 @@ obj-$(CONFIG_MLX4_CORE) += mlx4/
  obj-$(CONFIG_ENC28J60) += enc28j60.o
  obj-$(CONFIG_ETHOC) += ethoc.o
  obj-$(CONFIG_GRETH) += greth.o

diff --git a/target/linux/lantiq/patches-2.6.39/0012-MIPS-Lantiq-Add-etop-board-support.patch b/target/linux/lantiq/patches-2.6.39/0012-MIPS-Lantiq-Add-etop-board-support.patch
index 2bc4abd211d6895f60daee58d0149fe929b3942f..5004667a1f4b3672a038414763ce447d5616c05b 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/0012-MIPS-Lantiq-Add-etop-board-support.patch
+++ b/target/linux/lantiq/patches-2.6.39/0012-MIPS-Lantiq-Add-etop-board-support.patch
@@ -16,8 +16,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  arch/mips/lantiq/xway/mach-easy50712.c |    6 ++++++
  1 files changed, 6 insertions(+), 0 deletions(-)
 
-diff --git a/arch/mips/lantiq/xway/mach-easy50712.c b/arch/mips/lantiq/xway/mach-easy50712.c
-index e5e7e09..ea5027b 100644
 --- a/arch/mips/lantiq/xway/mach-easy50712.c
 +++ b/arch/mips/lantiq/xway/mach-easy50712.c
 @@ -12,6 +12,7 @@
@@ -28,7 +26,7 @@ index e5e7e09..ea5027b 100644
  
  #include <lantiq_soc.h>
  #include <irq.h>
-@@ -55,11 +56,16 @@ static struct ltq_pci_data ltq_pci_data = {
+@@ -55,11 +56,16 @@ static struct ltq_pci_data ltq_pci_data
        },
  };
  
@@ -45,6 +43,3 @@ index e5e7e09..ea5027b 100644
  }
  
  MIPS_MACHINE(LTQ_MACH_EASY50712,
--- 
-1.7.2.3
-

diff --git a/target/linux/lantiq/patches-2.6.39/0013-MIPS-Lantiq-Add-watchdog-support.patch b/target/linux/lantiq/patches-2.6.39/0013-MIPS-Lantiq-Add-watchdog-support.patch
index 5d07a63f75cce76b294e99819bdf6b7f23ceb91b..c40707cd918f3e291d128e6805cd68f4b0f80ada 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/0013-MIPS-Lantiq-Add-watchdog-support.patch
+++ b/target/linux/lantiq/patches-2.6.39/0013-MIPS-Lantiq-Add-watchdog-support.patch
@@ -21,7 +21,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -990,6 +990,12 @@
+@@ -990,6 +990,12 @@ config BCM63XX_WDT
          To compile this driver as a loadable module, choose M here.
          The module will be called bcm63xx_wdt.
  
@@ -36,7 +36,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
  # POWERPC Architecture
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -123,6 +123,7 @@
+@@ -123,6 +123,7 @@ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
  obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
  obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
  octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o

diff --git a/target/linux/lantiq/patches-2.6.39/110-falcon_board.patch b/target/linux/lantiq/patches-2.6.39/110-falcon_board.patch
index c6fb91034c7cbdbd429e4f96de3fa88cfc13c2a8..9355dc6865ecdbde13323f7de9d8af136a3c3b6d 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/110-falcon_board.patch
+++ b/target/linux/lantiq/patches-2.6.39/110-falcon_board.patch
@@ -1694,7 +1694,7 @@
 +#endif
 --- a/arch/mips/lantiq/Kconfig
 +++ b/arch/mips/lantiq/Kconfig
-@@ -16,8 +16,12 @@
+@@ -16,8 +16,12 @@ config SOC_XWAY
        bool "XWAY"
        select SOC_TYPE_XWAY
        select HW_HAS_PCI
@@ -1709,21 +1709,21 @@
  endif
 --- a/arch/mips/lantiq/Makefile
 +++ b/arch/mips/lantiq/Makefile
-@@ -9,3 +9,4 @@
+@@ -9,3 +9,4 @@ obj-y := irq.o setup.o clk.o prom.o devi
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
  
  obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
 +obj-$(CONFIG_SOC_FALCON) += falcon/
 --- a/arch/mips/lantiq/Platform
 +++ b/arch/mips/lantiq/Platform
-@@ -6,3 +6,4 @@
+@@ -6,3 +6,4 @@ platform-$(CONFIG_LANTIQ)      += lantiq/
  cflags-$(CONFIG_LANTIQ)               += -I$(srctree)/arch/mips/include/asm/mach-lantiq
  load-$(CONFIG_LANTIQ)         = 0xffffffff80002000
  cflags-$(CONFIG_SOC_TYPE_XWAY)        += -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway
 +cflags-$(CONFIG_SOC_FALCON)   += -I$(srctree)/arch/mips/include/asm/mach-lantiq/falcon
 --- a/arch/mips/lantiq/machtypes.h
 +++ b/arch/mips/lantiq/machtypes.h
-@@ -15,6 +15,11 @@
+@@ -15,6 +15,11 @@ enum lantiq_mach_type {
        LTQ_MACH_GENERIC = 0,
        LTQ_MACH_EASY50712,     /* Danube evaluation board */
        LTQ_MACH_EASY50601,     /* Amazon SE evaluation board */

diff --git a/target/linux/lantiq/patches-2.6.39/120-falcon-i2c.patch b/target/linux/lantiq/patches-2.6.39/120-falcon-i2c.patch
index 3dd873be74c71feb4dfc9f18356c304d7e90a3b3..c5d39c8c21ff7de76a9e98c62df79244e434bacb 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/120-falcon-i2c.patch
+++ b/target/linux/lantiq/patches-2.6.39/120-falcon-i2c.patch
@@ -1,16 +1,15 @@
 --- a/drivers/i2c/busses/Makefile
 +++ b/drivers/i2c/busses/Makefile
-@@ -74,6 +74,7 @@
+@@ -82,5 +82,6 @@ obj-$(CONFIG_I2C_SIBYTE)     += i2c-sibyte.o
  obj-$(CONFIG_I2C_STUB)                += i2c-stub.o
  obj-$(CONFIG_SCx200_ACB)      += scx200_acb.o
  obj-$(CONFIG_SCx200_I2C)      += scx200_i2c.o
 +obj-$(CONFIG_I2C_FALCON)      += i2c-falcon.o
  
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
+ ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -278,6 +278,10 @@
+@@ -282,6 +282,10 @@ config I2C_POWERMAC
  
  comment "I2C system bus drivers (mostly embedded / system-on-chip)"
  

diff --git a/target/linux/lantiq/patches-2.6.39/130-falcon-spi-flash.patch b/target/linux/lantiq/patches-2.6.39/130-falcon-spi-flash.patch
index 10ff6057eb5faf6fdc288a227ce08bfc7a70734d..94f13c98b2f0d2f2b3b4fddd0aaba1efd65a6946 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/130-falcon-spi-flash.patch
+++ b/target/linux/lantiq/patches-2.6.39/130-falcon-spi-flash.patch
@@ -1,6 +1,6 @@
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile
-@@ -55,6 +55,7 @@
+@@ -55,6 +55,7 @@ obj-$(CONFIG_SPI_SH_SCI)             += spi_sh_sci.
  obj-$(CONFIG_SPI_SH_MSIOF)            += spi_sh_msiof.o
  obj-$(CONFIG_SPI_STMP3XXX)            += spi_stmp.o
  obj-$(CONFIG_SPI_NUC900)              += spi_nuc900.o
@@ -484,7 +484,7 @@
 +MODULE_DESCRIPTION("Lantiq Falcon SPI controller driver");
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -210,6 +210,10 @@
+@@ -210,6 +210,10 @@ config SPI_MPC52xx
          This drivers supports the MPC52xx SPI controller in master SPI
          mode.
  

diff --git a/target/linux/lantiq/patches-2.6.39/150-falcon-easy98020.patch b/target/linux/lantiq/patches-2.6.39/150-falcon-easy98020.patch
index e9593c58c964a9cf875f6c0414a30f316acc2d85..7010d3517d04b8526adaae73fd97ece8e323ca70 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/150-falcon-easy98020.patch
+++ b/target/linux/lantiq/patches-2.6.39/150-falcon-easy98020.patch
@@ -100,7 +100,7 @@
 +                      easy98020_init);
 --- a/arch/mips/lantiq/falcon/Kconfig
 +++ b/arch/mips/lantiq/falcon/Kconfig
-@@ -6,6 +6,10 @@
+@@ -6,6 +6,10 @@ config LANTIQ_MACH_EASY98000
        bool "Easy98000"
        default y
  
@@ -113,7 +113,7 @@
  endif
 --- a/arch/mips/lantiq/falcon/Makefile
 +++ b/arch/mips/lantiq/falcon/Makefile
-@@ -2,3 +2,4 @@
+@@ -2,3 +2,4 @@ obj-y := clk-falcon.o devices.o gpio.o p
  obj-y += softdog_vpe.o
  obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
  obj-$(CONFIG_LANTIQ_MACH_EASY98000) += dev-leds-easy98000-cpld.o

diff --git a/target/linux/lantiq/patches-2.6.39/160-falcon-95C3AM1.patch b/target/linux/lantiq/patches-2.6.39/160-falcon-95C3AM1.patch
index 0347037428fc3ed22d92f874cf954e9d8459df92..fbe858474fe9ec01bad3988a267f2a022df8b66a 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/160-falcon-95C3AM1.patch
+++ b/target/linux/lantiq/patches-2.6.39/160-falcon-95C3AM1.patch
@@ -106,7 +106,7 @@
 +                      board_95C3AM1_init);
 --- a/arch/mips/lantiq/falcon/Kconfig
 +++ b/arch/mips/lantiq/falcon/Kconfig
-@@ -10,6 +10,10 @@
+@@ -10,6 +10,10 @@ config LANTIQ_MACH_EASY98020
        bool "Easy98020"
        default y
  
@@ -119,14 +119,14 @@
  endif
 --- a/arch/mips/lantiq/falcon/Makefile
 +++ b/arch/mips/lantiq/falcon/Makefile
-@@ -3,3 +3,4 @@
+@@ -3,3 +3,4 @@ obj-y += softdog_vpe.o
  obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
  obj-$(CONFIG_LANTIQ_MACH_EASY98000) += dev-leds-easy98000-cpld.o
  obj-$(CONFIG_LANTIQ_MACH_EASY98020) += mach-easy98020.o
 +obj-$(CONFIG_LANTIQ_MACH_95C3AM1)   += mach-95C3AM1.o
 --- a/arch/mips/lantiq/machtypes.h
 +++ b/arch/mips/lantiq/machtypes.h
-@@ -20,6 +20,7 @@
+@@ -20,6 +20,7 @@ enum lantiq_mach_type {
        LANTIQ_MACH_EASY98000,          /* Falcon Eval Board, NOR Flash */
        LANTIQ_MACH_EASY98000SF,        /* Falcon Eval Board, Serial Flash */
        LANTIQ_MACH_EASY98020,          /* Falcon Reference Board */

diff --git a/target/linux/lantiq/patches-2.6.39/200-mach-arv45xx.patch b/target/linux/lantiq/patches-2.6.39/200-mach-arv45xx.patch
index b82dadac98778e07a900803276d14ba2de43c496..a5fa58f1dc1747fac24b36de9cd678d2c0e37ed2 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/200-mach-arv45xx.patch
+++ b/target/linux/lantiq/patches-2.6.39/200-mach-arv45xx.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/xway/Kconfig
 +++ b/arch/mips/lantiq/xway/Kconfig
-@@ -6,6 +6,10 @@
+@@ -6,6 +6,10 @@ config LANTIQ_MACH_EASY50712
        bool "Easy50712 - Danube"
        default y
  
@@ -13,7 +13,7 @@
  endif
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
-@@ -5,3 +5,4 @@
+@@ -5,3 +5,4 @@ obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o
  
  obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
  obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
@@ -527,7 +527,7 @@
 +                      arv752dpw22_init);
 --- a/arch/mips/lantiq/machtypes.h
 +++ b/arch/mips/lantiq/machtypes.h
-@@ -21,6 +21,17 @@
+@@ -21,6 +21,17 @@ enum lantiq_mach_type {
        LANTIQ_MACH_EASY98000SF,        /* Falcon Eval Board, Serial Flash */
        LANTIQ_MACH_EASY98020,          /* Falcon Reference Board */
        LANTIQ_MACH_95C3AM1,            /* Board 95C3AM1 */

diff --git a/target/linux/lantiq/patches-2.6.39/210-mtd_uimage_split.patch b/target/linux/lantiq/patches-2.6.39/210-mtd_uimage_split.patch
index bca51a80d6d94a3e40c569af9d3e32cefdd42946..16173a3d273b2475e48ec6bae77fb8f478ce30db 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/210-mtd_uimage_split.patch
+++ b/target/linux/lantiq/patches-2.6.39/210-mtd_uimage_split.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -63,6 +63,10 @@
+@@ -57,6 +57,10 @@ config MTD_ROOTFS_SPLIT
        depends on MTD_PARTITIONS
        default y
  
@@ -10,10 +10,10 @@
 +
  config MTD_REDBOOT_PARTS
        tristate "RedBoot partition table parsing"
-       depends on MTD_PARTITIONS
+       ---help---
 --- a/drivers/mtd/mtdpart.c
 +++ b/drivers/mtd/mtdpart.c
-@@ -724,6 +724,82 @@
+@@ -860,6 +860,82 @@ static int refresh_rootfs_split(struct m
  }
  #endif /* CONFIG_MTD_ROOTFS_SPLIT */
  
@@ -96,9 +96,9 @@
  /*
   * This function, given a master MTD object and a partition table, creates
   * and registers slave MTD objects which are bound to the master according to
-@@ -748,6 +824,17 @@
-               if (!slave)
-                       return -ENOMEM;
+@@ -893,6 +969,17 @@ int add_mtd_partitions(struct mtd_info *
+ 
+               add_mtd_device(&slave->mtd);
  
 +#ifdef CONFIG_MTD_UIMAGE_SPLIT
 +              if (!strcmp(parts[i].name, "linux")) {

diff --git a/target/linux/lantiq/patches-2.6.39/220-atm_hack.patch b/target/linux/lantiq/patches-2.6.39/220-atm_hack.patch
index ef19643cf0e6ee6e6187b1f4f02cb51461be1929..7552b1d0cf4ede3c6cca84ca59f1a16a613aabe0 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/220-atm_hack.patch
+++ b/target/linux/lantiq/patches-2.6.39/220-atm_hack.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/mm/cache.c
 +++ b/arch/mips/mm/cache.c
-@@ -52,6 +52,8 @@
+@@ -52,6 +52,8 @@ void (*_dma_cache_wback)(unsigned long s
  void (*_dma_cache_inv)(unsigned long start, unsigned long size);
  
  EXPORT_SYMBOL(_dma_cache_wback_inv);
@@ -11,7 +11,7 @@
  
 --- a/net/atm/proc.c
 +++ b/net/atm/proc.c
-@@ -154,7 +154,7 @@
+@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil
  static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
  {
        static const char *const class_name[] = {
@@ -22,7 +22,7 @@
                "???",  "5",    "???",  "???",  /*  4- 7 */
 --- a/net/atm/common.c
 +++ b/net/atm/common.c
-@@ -62,11 +62,17 @@
+@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc
        write_unlock_irq(&vcc_sklist_lock);
  }
  

diff --git a/target/linux/lantiq/patches-2.6.39/230-cmdline_hack.patch b/target/linux/lantiq/patches-2.6.39/230-cmdline_hack.patch
index df232869f393cf30d182c6bfd3d208fba0980a50..3b8c581763f2e8416b65329b07bab1a2ebb40c5b 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/230-cmdline_hack.patch
+++ b/target/linux/lantiq/patches-2.6.39/230-cmdline_hack.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/prom.c
 +++ b/arch/mips/lantiq/prom.c
-@@ -39,6 +39,34 @@
+@@ -39,6 +39,34 @@ void prom_free_prom_memory(void)
  {
  }
  
@@ -35,7 +35,7 @@
  static void __init prom_init_cmdline(void)
  {
        int argc = fw_arg0;
-@@ -53,6 +81,7 @@
+@@ -53,6 +81,7 @@ static void __init prom_init_cmdline(voi
                        strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
                }
        }

diff --git a/target/linux/lantiq/patches-2.6.39/240-udp_redirect.patch b/target/linux/lantiq/patches-2.6.39/240-udp_redirect.patch
index 286dce810ff31b34aad75a265143e2567a3b6a3d..d66ca55cc416f70012f495f61bc17d113e0e53a7 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/240-udp_redirect.patch
+++ b/target/linux/lantiq/patches-2.6.39/240-udp_redirect.patch
@@ -249,7 +249,7 @@
 +#endif /* CONFIG_IFX_UDP_REDIRECT* */
 --- a/net/ipv4/Makefile
 +++ b/net/ipv4/Makefile
-@@ -14,6 +14,9 @@
+@@ -14,6 +14,9 @@ obj-y     := route.o inetpeer.o protocol
             inet_fragment.o
  
  obj-$(CONFIG_SYSCTL) += sysctl_net_ipv4.o
@@ -272,7 +272,7 @@
  struct udp_table udp_table __read_mostly;
  EXPORT_SYMBOL(udp_table);
  
-@@ -802,7 +806,7 @@
+@@ -802,7 +806,7 @@ int udp_sendmsg(struct kiocb *iocb, stru
        u8  tos;
        int err, is_udplite = IS_UDPLITE(sk);
        int corkreq = up->corkflag || msg->msg_flags&MSG_MORE;
@@ -281,7 +281,7 @@
        struct sk_buff *skb;
  
        if (len > 0xFFFF)
-@@ -818,7 +822,13 @@
+@@ -818,7 +822,13 @@ int udp_sendmsg(struct kiocb *iocb, stru
        ipc.opt = NULL;
        ipc.tx_flags = 0;
  
@@ -296,7 +296,7 @@
  
        if (up->pending) {
                /*
-@@ -1608,6 +1618,7 @@
+@@ -1608,6 +1618,7 @@ int __udp4_lib_rcv(struct sk_buff *skb,
        struct rtable *rt = skb_rtable(skb);
        __be32 saddr, daddr;
        struct net *net = dev_net(skb->dev);
@@ -304,7 +304,7 @@
  
        /*
         *  Validate the packet.
-@@ -1640,7 +1651,16 @@
+@@ -1640,7 +1651,16 @@ int __udp4_lib_rcv(struct sk_buff *skb,
        sk = __udp4_lib_lookup_skb(skb, uh->source, uh->dest, udptable);
  
        if (sk != NULL) {
@@ -322,7 +322,7 @@
                sock_put(sk);
  
                /* a return value > 0 means to resubmit the input, but
-@@ -1937,7 +1957,7 @@
+@@ -1937,7 +1957,7 @@ struct proto udp_prot = {
        .clear_sk          = sk_prot_clear_portaddr_nulls,
  };
  EXPORT_SYMBOL(udp_prot);
@@ -333,7 +333,7 @@
  
 --- a/net/Kconfig
 +++ b/net/Kconfig
-@@ -72,6 +72,12 @@
+@@ -72,6 +72,12 @@ config INET
  
          Short answer: say Y.
  

diff --git a/target/linux/lantiq/patches-2.6.39/250-mt-vpe.patch b/target/linux/lantiq/patches-2.6.39/250-mt-vpe.patch
index 0a1928929e724138c012b9e752c86e8cd9cbda52..6bb38b44cae783846d1c091a33331d79f3cad758 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/250-mt-vpe.patch
+++ b/target/linux/lantiq/patches-2.6.39/250-mt-vpe.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -1871,6 +1871,28 @@
+@@ -1871,6 +1871,28 @@ config MIPS_VPE_LOADER
          Includes a loader for loading an elf relocatable object
          onto another VPE and running it.
  
@@ -110,7 +110,7 @@
  /* TCStatus fields (per TC) */
  #define TCSTATUS_TASID                (_ULCAST_(0xff))
  #define TCSTATUS_IXMT_SHIFT   10
-@@ -350,6 +390,14 @@
+@@ -350,6 +390,14 @@ do {                                                                      \
  #define write_vpe_c0_vpecontrol(val)  mttc0(1, 1, val)
  #define read_vpe_c0_vpeconf0()                mftc0(1, 2)
  #define write_vpe_c0_vpeconf0(val)    mttc0(1, 2, val)
@@ -125,7 +125,7 @@
  #define read_vpe_c0_count()           mftc0(9, 0)
  #define write_vpe_c0_count(val)               mttc0(9, 0, val)
  #define read_vpe_c0_status()          mftc0(12, 0)
-@@ -381,6 +429,12 @@
+@@ -381,6 +429,12 @@ do {                                                                      \
  #define write_tc_c0_tchalt(val)               mttc0(2, 4, val)
  #define read_tc_c0_tccontext()                mftc0(2, 5)
  #define write_tc_c0_tccontext(val)    mttc0(2, 5, val)
@@ -140,7 +140,7 @@
  #define read_tc_gpr_sp()              mftgpr(29)
 --- a/arch/mips/kernel/Makefile
 +++ b/arch/mips/kernel/Makefile
-@@ -85,7 +85,8 @@
+@@ -85,7 +85,8 @@ obj-$(CONFIG_MIPS32_O32)     += binfmt_elfo3
  
  obj-$(CONFIG_KGDB)            += kgdb.o
  obj-$(CONFIG_PROC_FS)         += proc.o
@@ -254,7 +254,7 @@
  
  /*
   * Dump new MIPS MT state for the core. Does not leave TCs halted.
-@@ -78,18 +148,18 @@
+@@ -78,18 +148,18 @@ void mips_mt_regdump(unsigned long mvpct
                        if ((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) {
                                printk("  VPE %d\n", i);
                                printk("   VPEControl : %08lx\n",
@@ -280,7 +280,7 @@
                                break; /* Next VPE */
                        }
                }
-@@ -287,6 +357,9 @@
+@@ -287,6 +357,9 @@ void mips_mt_set_cpuoptions(void)
                printk("Mapped %ld ITC cells starting at 0x%08x\n",
                        ((itcblkgrn & 0x7fe00000) >> 20), itc_base);
        }
@@ -300,7 +300,7 @@
  #include <asm/bootinfo.h>
  #include <asm/cpu.h>
  #include <asm/cpu-features.h>
-@@ -110,3 +111,19 @@
+@@ -110,3 +111,19 @@ const struct seq_operations cpuinfo_op =
        .stop   = c_stop,
        .show   = show_cpuinfo,
  };
@@ -322,7 +322,7 @@
 +}
 --- a/arch/mips/kernel/smtc.c
 +++ b/arch/mips/kernel/smtc.c
-@@ -1334,6 +1334,13 @@
+@@ -1334,6 +1334,13 @@ void smtc_get_new_mmu_context(struct mm_
        asid = asid_cache(cpu);
  
        do {
@@ -338,7 +338,7 @@
                                flush_icache_all();
 --- a/arch/mips/kernel/vpe.c
 +++ b/arch/mips/kernel/vpe.c
-@@ -76,6 +76,58 @@
+@@ -76,6 +76,58 @@ static struct kspd_notifications kspd_ev
  static int kspd_events_reqd;
  #endif
  
@@ -397,7 +397,7 @@
  /* grab the likely amount of memory we will need. */
  #ifdef CONFIG_MIPS_VPE_LOADER_TOM
  #define P_SIZE (2 * 1024 * 1024)
-@@ -268,6 +320,13 @@
+@@ -268,6 +320,13 @@ static void *alloc_progmem(unsigned long
        void *addr;
  
  #ifdef CONFIG_MIPS_VPE_LOADER_TOM
@@ -411,7 +411,7 @@
        /*
         * This means you must tell Linux to use less memory than you
         * physically have, for example by passing a mem= boot argument.
-@@ -746,6 +805,12 @@
+@@ -746,6 +805,12 @@ static int vpe_run(struct vpe * v)
        }
  
        /* Write the address we want it to start running from in the TCPC register. */
@@ -424,7 +424,7 @@
        write_tc_c0_tcrestart((unsigned long)v->__start);
        write_tc_c0_tccontext((unsigned long)0);
  
-@@ -759,6 +824,20 @@
+@@ -759,6 +824,20 @@ static int vpe_run(struct vpe * v)
  
        write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
  
@@ -445,7 +445,7 @@
        /*
         * The sde-kit passes 'memsize' to __start in $a3, so set something
         * here...  Or set $a3 to zero and define DFLT_STACK_SIZE and
-@@ -833,6 +912,9 @@
+@@ -833,6 +912,9 @@ static int find_vpe_symbols(struct vpe *
        if ( (v->__start == 0) || (v->shared_ptr == NULL))
                return -1;
  
@@ -455,7 +455,7 @@
        return 0;
  }
  
-@@ -994,6 +1076,15 @@
+@@ -994,6 +1076,15 @@ static int vpe_elfload(struct vpe * v)
                           (unsigned long)v->load_addr + v->len);
  
        if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
@@ -471,7 +471,7 @@
                if (v->__start == 0) {
                        printk(KERN_WARNING "VPE loader: program does not contain "
                               "a __start symbol\n");
-@@ -1064,6 +1155,9 @@
+@@ -1064,6 +1155,9 @@ static int vpe_open(struct inode *inode,
        struct vpe_notifications *not;
        struct vpe *v;
        int ret;
@@ -481,7 +481,7 @@
  
        if (minor != iminor(inode)) {
                /* assume only 1 device at the moment. */
-@@ -1089,7 +1183,12 @@
+@@ -1089,7 +1183,12 @@ static int vpe_open(struct inode *inode,
                release_progmem(v->load_addr);
                cleanup_tc(get_tc(tclimit));
        }
@@ -495,7 +495,7 @@
        /* this of-course trashes what was there before... */
        v->pbuffer = vmalloc(P_SIZE);
        if (!v->pbuffer) {
-@@ -1097,11 +1196,14 @@
+@@ -1097,11 +1196,14 @@ static int vpe_open(struct inode *inode,
                return -ENOMEM;
        }
        v->plen = P_SIZE;
@@ -510,7 +510,7 @@
  
  #ifdef CONFIG_MIPS_APSP_KSPD
        /* get kspd to tell us when a syscall_exit happens */
-@@ -1349,6 +1451,133 @@
+@@ -1349,6 +1451,133 @@ static void kspd_sp_exit( int sp_id)
        cleanup_tc(get_tc(sp_id));
  }
  #endif
@@ -644,7 +644,7 @@
  
  static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
                          const char *buf, size_t len)
-@@ -1430,6 +1659,18 @@
+@@ -1430,6 +1659,18 @@ static int __init vpe_module_init(void)
                printk("VPE loader: not a MIPS MT capable processor\n");
                return -ENODEV;
        }
@@ -663,7 +663,7 @@
  
        if (vpelimit == 0) {
                printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
-@@ -1474,10 +1715,12 @@
+@@ -1474,10 +1715,12 @@ static int __init vpe_module_init(void)
        mtflags = dmt();
        vpflags = dvpe();
  
@@ -677,7 +677,7 @@
  
        val = read_c0_mvpconf0();
        hw_tcs = (val & MVPCONF0_PTC) + 1;
-@@ -1489,6 +1732,7 @@
+@@ -1489,6 +1732,7 @@ static int __init vpe_module_init(void)
                 * reschedule send IPIs or similar we might hang.
                 */
                clear_c0_mvpcontrol(MVPCONTROL_VPC);
@@ -685,7 +685,7 @@
                evpe(vpflags);
                emt(mtflags);
                local_irq_restore(flags);
-@@ -1514,6 +1758,7 @@
+@@ -1514,6 +1758,7 @@ static int __init vpe_module_init(void)
                        }
  
                        v->ntcs = hw_tcs - tclimit;
@@ -693,7 +693,7 @@
  
                        /* add the tc to the list of this vpe's tc's. */
                        list_add(&t->tc, &v->tc);
-@@ -1582,6 +1827,7 @@
+@@ -1582,6 +1827,7 @@ static int __init vpe_module_init(void)
  out_reenable:
        /* release config state */
        clear_c0_mvpcontrol(MVPCONTROL_VPC);

diff --git a/target/linux/lantiq/patches-2.6.39/260-ar9-cache-split.patch b/target/linux/lantiq/patches-2.6.39/260-ar9-cache-split.patch
index 88d2a61f9a56e2f5ae24b948e32b759af2985dfe..254fc61aa3de250d0c9edea3b9293c20f61f01a3 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/260-ar9-cache-split.patch
+++ b/target/linux/lantiq/patches-2.6.39/260-ar9-cache-split.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -1653,6 +1653,28 @@
+@@ -1878,6 +1878,28 @@ config IFX_VPE_EXT
        help
          IFX included extensions in APRP
  
@@ -31,7 +31,7 @@
        depends on MIPS_MT && PROC_FS
 --- a/arch/mips/kernel/vpe.c
 +++ b/arch/mips/kernel/vpe.c
-@@ -129,6 +129,13 @@
+@@ -128,6 +128,13 @@ __setup("vpe1_wdog_timeout=", wdog_timeo
  EXPORT_SYMBOL(vpe1_wdog_timeout);
  
  #endif
@@ -45,7 +45,7 @@
  /* grab the likely amount of memory we will need. */
  #ifdef CONFIG_MIPS_VPE_LOADER_TOM
  #define P_SIZE (2 * 1024 * 1024)
-@@ -867,6 +874,65 @@
+@@ -866,6 +873,65 @@ static int vpe_run(struct vpe * v)
        /* enable this VPE */
        write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
  
@@ -113,7 +113,7 @@
        write_vpe_c0_cause(0);
 --- a/arch/mips/mm/c-r4k.c
 +++ b/arch/mips/mm/c-r4k.c
-@@ -1348,6 +1348,106 @@
+@@ -1345,6 +1345,106 @@ static int __init setcoherentio(char *st
  __setup("coherentio", setcoherentio);
  #endif
  
@@ -220,7 +220,7 @@
  void __cpuinit r4k_cache_init(void)
  {
        extern void build_clear_page(void);
-@@ -1367,6 +1467,78 @@
+@@ -1364,6 +1464,78 @@ void __cpuinit r4k_cache_init(void)
                break;
        }
  

diff --git a/target/linux/lantiq/patches-2.6.39/400-spi1.patch b/target/linux/lantiq/patches-2.6.39/400-spi1.patch
index 61bfa2e18acdd857badfe108c4ac059f642e70ee..c3c9330219f985751db0d45a3dea8023f6da10fa 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/400-spi1.patch
+++ b/target/linux/lantiq/patches-2.6.39/400-spi1.patch
@@ -10,7 +10,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
 
 --- a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
 +++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
-@@ -50,4 +50,13 @@
+@@ -50,4 +50,13 @@ struct ltq_eth_data {
        int mii_mode;
  };
  

diff --git a/target/linux/lantiq/patches-2.6.39/410-spi2.patch b/target/linux/lantiq/patches-2.6.39/410-spi2.patch
index d291e09ba5605fe5563d2c138f0fe7d648f3884b..e37790a81e7d42eba1e534c3dfccd31ad276e905 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/410-spi2.patch
+++ b/target/linux/lantiq/patches-2.6.39/410-spi2.patch
@@ -10,7 +10,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
 
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -133,6 +133,14 @@
+@@ -193,6 +193,14 @@ config SPI_IMX
          This enables using the Freescale i.MX SPI controllers in master
          mode.
  
@@ -27,14 +27,14 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
        depends on PARPORT && EXPERIMENTAL
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile
-@@ -20,6 +20,7 @@
+@@ -26,6 +26,7 @@ obj-$(CONFIG_SPI_EP93XX)             += ep93xx_spi.
  obj-$(CONFIG_SPI_GPIO)                        += spi_gpio.o
  obj-$(CONFIG_SPI_GPIO_OLD)            += spi_gpio_old.o
  obj-$(CONFIG_SPI_IMX)                 += spi_imx.o
 +obj-$(CONFIG_SPI_LANTIQ)              += spi_lantiq.o
  obj-$(CONFIG_SPI_LM70_LLP)            += spi_lm70llp.o
  obj-$(CONFIG_SPI_PXA2XX)              += pxa2xx_spi.o
- obj-$(CONFIG_SPI_OMAP_UWIRE)          += omap_uwire.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)          += pxa2xx_spi_pci.o
 --- /dev/null
 +++ b/drivers/spi/spi_lantiq.c
 @@ -0,0 +1,1063 @@

diff --git a/target/linux/lantiq/patches-2.6.39/420-spi3.patch b/target/linux/lantiq/patches-2.6.39/420-spi3.patch
index 31cf3c1a8703d92af7a23b8517730ff80c9ca971..f89886fb75bfb5d4ba0f1f245f678a5260492741 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/420-spi3.patch
+++ b/target/linux/lantiq/patches-2.6.39/420-spi3.patch
@@ -18,7 +18,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
  
  #include <asm/bootinfo.h>
  #include <asm/irq.h>
-@@ -119,3 +120,28 @@
+@@ -119,3 +120,28 @@ ltq_register_etop(struct ltq_eth_data *e
                platform_device_register(&ltq_etop);
        }
  }

diff --git a/target/linux/lantiq/patches-2.6.39/500-register_ebu.patch b/target/linux/lantiq/patches-2.6.39/500-register_ebu.patch
index 613cb69dc04975e9e22b4adc80a3cf52e3bf3471..3c2fb2b68ce92ade596e357bb4faf66ad397af82 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/500-register_ebu.patch
+++ b/target/linux/lantiq/patches-2.6.39/500-register_ebu.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/xway/devices.c
 +++ b/arch/mips/lantiq/xway/devices.c
-@@ -121,6 +121,29 @@
+@@ -121,6 +121,29 @@ ltq_register_etop(struct ltq_eth_data *e
        }
  }
  
@@ -32,7 +32,7 @@
                .start  = LTQ_SSC_BASE_ADDR,
 --- a/arch/mips/lantiq/xway/devices.h
 +++ b/arch/mips/lantiq/xway/devices.h
-@@ -16,5 +16,6 @@
+@@ -16,5 +16,6 @@ extern void ltq_register_gpio(void);
  extern void ltq_register_gpio_stp(void);
  extern void ltq_register_ase_asc(void);
  extern void ltq_register_etop(struct ltq_eth_data *eth);

diff --git a/target/linux/lantiq/patches-2.6.39/510-register_madwifi.patch b/target/linux/lantiq/patches-2.6.39/510-register_madwifi.patch
index 678f0f5691b2d4a60ff00b2ac47a05a40598729c..64c13b0670121e555307c5728232093b4a16c8a6 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/510-register_madwifi.patch
+++ b/target/linux/lantiq/patches-2.6.39/510-register_madwifi.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/xway/devices.c
 +++ b/arch/mips/lantiq/xway/devices.c
-@@ -144,6 +144,16 @@
+@@ -144,6 +144,16 @@ ltq_register_gpio_ebu(unsigned int value
        platform_device_register(&ltq_ebu);
  }
  
@@ -19,7 +19,7 @@
                .start  = LTQ_SSC_BASE_ADDR,
 --- a/arch/mips/lantiq/xway/devices.h
 +++ b/arch/mips/lantiq/xway/devices.h
-@@ -17,5 +17,6 @@
+@@ -17,5 +17,6 @@ extern void ltq_register_gpio_stp(void);
  extern void ltq_register_ase_asc(void);
  extern void ltq_register_etop(struct ltq_eth_data *eth);
  extern void ltq_register_gpio_ebu(unsigned int value);

diff --git a/target/linux/lantiq/patches-2.6.39/520-register_buttons.patch b/target/linux/lantiq/patches-2.6.39/520-register_buttons.patch
index 0d8d58ea53c73674788744d55e6a5177d39b76d6..442df5d5cead27097a7ef2d789a22edf8687e662 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/520-register_buttons.patch
+++ b/target/linux/lantiq/patches-2.6.39/520-register_buttons.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/xway/devices.c
 +++ b/arch/mips/lantiq/xway/devices.c
-@@ -154,6 +154,26 @@
+@@ -154,6 +154,26 @@ ltq_register_madwifi_eep(void)
        lantiq_emulate_madwifi_eep = 1;
  }
  
@@ -37,7 +37,7 @@
  
  extern void ltq_register_gpio(void);
  extern void ltq_register_gpio_stp(void);
-@@ -18,5 +19,6 @@
+@@ -18,5 +19,6 @@ extern void ltq_register_ase_asc(void);
  extern void ltq_register_etop(struct ltq_eth_data *eth);
  extern void ltq_register_gpio_ebu(unsigned int value);
  extern void ltq_register_madwifi_eep(void);

diff --git a/target/linux/lantiq/patches-2.6.39/530-register_tapi.patch b/target/linux/lantiq/patches-2.6.39/530-register_tapi.patch
index a5810644437995428aa0f27a052f832a616e79fb..a525313eae749bb320a366ecca754687053d4a30 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/530-register_tapi.patch
+++ b/target/linux/lantiq/patches-2.6.39/530-register_tapi.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/devices.c
 +++ b/arch/mips/lantiq/devices.c
-@@ -120,3 +120,20 @@
+@@ -120,3 +120,20 @@ void __init ltq_register_pci(struct ltq_
        pr_err("kernel is compiled without PCI support\n");
  }
  #endif
@@ -23,7 +23,7 @@
 +}
 --- a/arch/mips/lantiq/devices.h
 +++ b/arch/mips/lantiq/devices.h
-@@ -19,5 +19,6 @@
+@@ -19,5 +19,6 @@ extern void ltq_register_nor(struct phys
  extern void ltq_register_wdt(void);
  extern void ltq_register_asc(int port);
  extern void ltq_register_pci(struct ltq_pci_data *data);
@@ -32,7 +32,7 @@
  #endif
 --- a/arch/mips/lantiq/xway/mach-easy50712.c
 +++ b/arch/mips/lantiq/xway/mach-easy50712.c
-@@ -66,6 +66,7 @@
+@@ -66,6 +66,7 @@ static void __init easy50712_init(void)
        ltq_register_nor(&easy50712_flash_data);
        ltq_register_pci(&ltq_pci_data);
        ltq_register_etop(&ltq_eth_data);

diff --git a/target/linux/lantiq/patches-2.6.39/550-dwc_otg.patch b/target/linux/lantiq/patches-2.6.39/550-dwc_otg.patch
index 7747b8058eafa59828708cec3619d6bca7adb9ae..88955934bf82b48c6bf252505d7df164b440f810 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/550-dwc_otg.patch
+++ b/target/linux/lantiq/patches-2.6.39/550-dwc_otg.patch
@@ -1,6 +1,6 @@
 --- a/drivers/usb/Kconfig
 +++ b/drivers/usb/Kconfig
-@@ -114,6 +114,8 @@
+@@ -114,6 +114,8 @@ source "drivers/usb/wusbcore/Kconfig"
  
  source "drivers/usb/host/Kconfig"
  
@@ -11,7 +11,7 @@
  source "drivers/usb/class/Kconfig"
 --- a/drivers/usb/Makefile
 +++ b/drivers/usb/Makefile
-@@ -27,6 +27,8 @@
+@@ -27,6 +27,8 @@ obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
  
  obj-$(CONFIG_USB_WUSB)                += wusbcore/
  
@@ -15513,7 +15513,7 @@
 +#endif
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
-@@ -6,3 +6,4 @@
+@@ -6,3 +6,4 @@ obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o
  obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
  obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
  obj-$(CONFIG_LANTIQ_MACH_ARV45XX) += mach-arv45xx.o
@@ -15613,7 +15613,7 @@
 +#endif
 --- a/drivers/usb/core/hub.c
 +++ b/drivers/usb/core/hub.c
-@@ -2812,11 +2812,11 @@
+@@ -2812,11 +2812,11 @@ hub_port_init (struct usb_hub *hub, stru
                udev->ttport = hdev->ttport;
        } else if (udev->speed != USB_SPEED_HIGH
                        && hdev->speed == USB_SPEED_HIGH) {

diff --git a/target/linux/lantiq/patches-2.6.39/570-gpio_fix.patch b/target/linux/lantiq/patches-2.6.39/570-gpio_fix.patch
index a05835599f0f730c114cd25981f0de36b975bf19..6295f789907cd2aff77347512a9da595562e2468 100644 (file)
--- a/target/linux/lantiq/patches-2.6.39/570-gpio_fix.patch
+++ b/target/linux/lantiq/patches-2.6.39/570-gpio_fix.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/lantiq/xway/gpio_ebu.c
 +++ b/arch/mips/lantiq/xway/gpio_ebu.c
-@@ -63,7 +63,6 @@
+@@ -63,7 +63,6 @@ static struct gpio_chip ltq_ebu_chip = {
        .set = ltq_ebu_set,
        .base = 72,
        .ngpio = 16,
@@ -10,7 +10,7 @@
  
 --- a/arch/mips/lantiq/xway/gpio_stp.c
 +++ b/arch/mips/lantiq/xway/gpio_stp.c
-@@ -72,7 +72,6 @@
+@@ -72,7 +72,6 @@ static struct gpio_chip ltq_stp_chip = {
        .set = ltq_stp_set,
        .base = 48,
        .ngpio = 24,