staging: comedi: me4000: use comedi_dio_update_state()

The extra mask used to only update the channels configured as outputs is
not necessary in this driver. Remove it and use comedi_dio_update_state()
to handle the boilerplate code to update the subdevice s->state.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c
index 8f4afadab76a617a526da821d3ac029562eadf3c..aba7beae8e860ff87e0964a4402c41ad8fb0803a 100644 (file)
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -1313,29 +1313,12 @@ static int me4000_ao_insn_read(struct comedi_device *dev,
        return 1;
 }
 
-/*=============================================================================
-  Digital I/O section
-  ===========================================================================*/
-
 static int me4000_dio_insn_bits(struct comedi_device *dev,
                                struct comedi_subdevice *s,
-                               struct comedi_insn *insn, unsigned int *data)
+                               struct comedi_insn *insn,
+                               unsigned int *data)
 {
-       /*
-        * The insn data consists of a mask in data[0] and the new data
-        * in data[1]. The mask defines which bits we are concerning about.
-        * The new data must be anded with the mask.
-        * Each channel corresponds to a bit.
-        */
-       if (data[0]) {
-               /* Check if requested ports are configured for output */
-               if ((s->io_bits & data[0]) != data[0])
-                       return -EIO;
-
-               s->state &= ~data[0];
-               s->state |= data[0] & data[1];
-
-               /* Write out the new digital output lines */
+       if (comedi_dio_update_state(s, data)) {
                outl((s->state >> 0) & 0xFF,
                            dev->iobase + ME4000_DIO_PORT_0_REG);
                outl((s->state >> 8) & 0xFF,
@@ -1346,8 +1329,6 @@ static int me4000_dio_insn_bits(struct comedi_device *dev,
                            dev->iobase + ME4000_DIO_PORT_3_REG);
        }
 
-       /* On return, data[1] contains the value of
-          the digital input and output lines. */
        data[1] = ((inl(dev->iobase + ME4000_DIO_PORT_0_REG) & 0xFF) << 0) |
                  ((inl(dev->iobase + ME4000_DIO_PORT_1_REG) & 0xFF) << 8) |
                  ((inl(dev->iobase + ME4000_DIO_PORT_2_REG) & 0xFF) << 16) |