case "$board" in
VG3503J)
- ucidef_set_led_netdev "lan1" "lan1" "bt:green:lan1" "eth0"
- ucidef_set_led_netdev "lan2" "lan2" "bt:green:lan2" "eth1"
- ucidef_set_led_netdev "port1" "port1" "bt:green:port1" "eth0"
- ucidef_set_led_netdev "port2" "port2" "bt:green:port2" "eth1"
ucidef_set_led_netdev "vdsl" "vdsl" "bt:green:dsl" "ptm0"
;;
*)
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
+ gphy-leds {
+ lantiq,groups = "gphy0 led0", "gphy0 led1",
+ "gphy0 led2", "gphy1 led0",
+ "gphy1 led1", "gphy1 led2";
+ lantiq,function = "gphy";
+ lantiq,pull = <2>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
};
};
interrupt-parent = <&icu0>;
interrupts = <73 72>;
- lan1: interface@0 {
+ interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
- lantiq,wan;
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- };
-
- lan2: interface@1 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- mac-address = [ 00 11 22 33 44 56 ];
-
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "mii";
phy-handle = <&phy11>;
};
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "mii";
+ phy-handle = <&phy13>;
+ };
};
mdio@0 {
gpio-leds {
compatible = "gpio-leds";
- port2orange {
- label = "bt:orange:port2";
- gpios = <&gpio 2 0>;
- };
- lan2 {
- label = "bt:green:lan2";
- gpios = <&gpio 5 0>;
- };
- port2green {
- label = "bt:green:port2";
- gpios = <&gpio 7 0>;
- };
power2 {
label = "power2";
gpios = <&gpio 14 1>;
label = "power";
gpios = <&gpio 28 1>;
};
- lan1 {
- label = "bt:green:lan1";
- gpios = <&gpio 44 0>;
- };
- port1green {
- label = "bt:green:port1";
- gpios = <&gpio 45 0>;
- };
- port1orange {
- label = "bt:orange:port1";
- gpios = <&gpio 47 0>;
- };
};
};