FEATURES:=squashfs gpio
KERNEL_PATCHVER:=5.4
-KERNEL_TESTING_PATCHVER:=5.4
+KERNEL_TESTING_PATCHVER:=5.10
define Target/Description
Build firmware images for Ralink RT288x/RT3xxx based boards.
{
const __be32 *_phy_addr = NULL;
struct phy_device *phydev;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0)
int phy_mode;
+#else
+ phy_interface_t phy_mode = PHY_INTERFACE_MODE_NA;
+#endif
_phy_addr = of_get_property(phy_node, "reg", NULL);
return -EINVAL;
}
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0)
phy_mode = of_get_phy_mode(phy_node);
if (phy_mode < 0) {
+#else
+ of_get_phy_mode(phy_node, &phy_mode);
+ if (phy_mode == PHY_INTERFACE_MODE_NA) {
+#endif
dev_err(priv->dev, "incorrect phy-mode %d\n", phy_mode);
priv->phy->phy_node[port] = NULL;
return -EINVAL;
const __be32 *id = of_get_property(np, "reg", NULL);
const __be32 *link;
int size;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0)
int phy_mode;
+#else
+ phy_interface_t phy_mode = PHY_INTERFACE_MODE_NA;
+#endif
if (!id || (be32_to_cpu(*id) != 0)) {
pr_err("%s: invalid port id\n", np->name);
return;
}
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0)
phy_mode = of_get_phy_mode(np);
+#else
+ of_get_phy_mode(np, &phy_mode);
+#endif
switch (phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
break;
return rx_done;
}
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0)
static void fe_tx_timeout(struct net_device *dev)
+#else
+static void fe_tx_timeout(struct net_device *dev, unsigned int txqueue)
+#endif
{
struct fe_priv *priv = netdev_priv(dev);
struct fe_tx_ring *ring = &priv->tx_ring;
struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
const __be32 *_id = of_get_property(np, "reg", NULL);
const __be32 *phy_addr;
- int phy_mode, size, id;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0)
+ int phy_mode;
+#else
+ phy_interface_t phy_mode = PHY_INTERFACE_MODE_NA;
+#endif
+ int size, id;
int shift = 12;
u32 val, mask = 0;
u32 val_delay = 0;
return;
}
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0)
phy_mode = of_get_phy_mode(np);
+#else
+ of_get_phy_mode(np, &phy_mode);
+#endif
switch (phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
mask = 0;
--- /dev/null
+CONFIG_AR8216_PHY=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_SYSTICK_QUIRK=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKEVT_RT3352=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_DIEI=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CSRC_R4K=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_MT7620A_EVAL is not set
+# CONFIG_DTB_OMEGA2P is not set
+CONFIG_DTB_RT_NONE=y
+# CONFIG_DTB_VOCORE2 is not set
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_LIB_ASHLDI3=y
+CONFIG_GENERIC_LIB_ASHRDI3=y
+CONFIG_GENERIC_LIB_CMPDI2=y
+CONFIG_GENERIC_LIB_LSHRDI3=y
+CONFIG_GENERIC_LIB_UCMPDI2=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_MT7621 is not set
+CONFIG_GPIO_RALINK=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HZ=250
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+# CONFIG_KERNEL_ZSTD is not set
+CONFIG_LIBFDT=y
+CONFIG_LLD_VERSION=0
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGRATION=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CBPF_JIT=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_LD_CAN_LINK_VDSO=y
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_MIPS_SPRAM=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MT7621_WDT is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
+CONFIG_MTD_SPLIT_JIMAGE_FW=y
+CONFIG_MTD_SPLIT_SEAMA_FW=y
+CONFIG_MTD_SPLIT_TPLINK_FW=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MTD_VIRT_CONCAT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK_GSW_MT7620=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NET_RALINK_MDIO_MT7620=y
+CONFIG_NET_RALINK_MT7620=y
+# CONFIG_NET_RALINK_RT3050 is not set
+CONFIG_NET_RALINK_SOC=y
+# CONFIG_NET_VENDOR_MEDIATEK is not set
+CONFIG_NET_VENDOR_RALINK=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
+# CONFIG_PCI_MT7621 is not set
+# CONFIG_PCI_MT7621_PHY is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHY_RALINK_USB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RT2880=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_RALINK=y
+CONFIG_RALINK_WDT=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SOC_MT7620=y
+# CONFIG_SOC_MT7621 is not set
+# CONFIG_SOC_RT288X is not set
+# CONFIG_SOC_RT305X is not set
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+# CONFIG_SPI_MT7621 is not set
+CONFIG_SPI_RT2880=y
+CONFIG_SRCU=y
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_LEDS=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_TARGET_ISA_REV=2
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
--- /dev/null
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_AT803X_PHY=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BOARD_SCACHE=y
+CONFIG_BOUNCE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MIPS_GIC=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_COMMON_CLK=y
+# CONFIG_COMMON_CLK_BOSTON is not set
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_DIEI=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_MIPSR2_IRQ_EI=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_ACOMP2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CSRC_R4K=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_DIMLIB=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_GNUBEE1 is not set
+# CONFIG_DTB_GNUBEE2 is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_LIB_ASHLDI3=y
+CONFIG_GENERIC_LIB_ASHRDI3=y
+CONFIG_GENERIC_LIB_CMPDI2=y
+CONFIG_GENERIC_LIB_LSHRDI3=y
+CONFIG_GENERIC_LIB_UCMPDI2=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_MT7621=y
+# CONFIG_GPIO_RALINK is not set
+CONFIG_GPIO_WATCHDOG=y
+# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
+CONFIG_GRO_CELLS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HIGHMEM=y
+CONFIG_HZ=250
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_MT7621=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+# CONFIG_KERNEL_ZSTD is not set
+CONFIG_LED_TRIGGER_PHY=y
+CONFIG_LIBFDT=y
+CONFIG_LLD_VERSION=0
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGRATION=y
+CONFIG_MIKROTIK=y
+CONFIG_MIKROTIK_RB_SYSFS=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CBPF_JIT=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+CONFIG_MIPS_CM=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+CONFIG_MIPS_CPC=y
+CONFIG_MIPS_CPS=y
+# CONFIG_MIPS_CPS_NS16550_BOOL is not set
+CONFIG_MIPS_CPU_SCACHE=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
+CONFIG_MIPS_GIC=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_LD_CAN_LINK_VDSO=y
+CONFIG_MIPS_MT=y
+CONFIG_MIPS_MT_FPAFF=y
+CONFIG_MIPS_MT_SMP=y
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_NR_CPU_NR_MAP=4
+CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_MIPS_SPRAM=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MT7621_WDT=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+CONFIG_MTD_NAND_MT7621=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_ROUTERBOOT_PARTS=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_MTD_SPLIT_MINOR_FW=y
+CONFIG_MTD_SPLIT_SEAMA_FW=y
+CONFIG_MTD_SPLIT_TPLINK_FW=y
+CONFIG_MTD_SPLIT_TRX_FW=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_VIRT_CONCAT=y
+# CONFIG_MTK_HSDMA is not set
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MT7530=y
+CONFIG_NET_DSA_TAG_MTK=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_MEDIATEK_SOC=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NET_VENDOR_MEDIATEK=y
+# CONFIG_NET_VENDOR_RALINK is not set
+CONFIG_NR_CPUS=4
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_PADATA=y
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_DRIVERS_GENERIC=y
+CONFIG_PCI_MT7621=y
+CONFIG_PCI_MT7621_PHY=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
+# CONFIG_PHY_RALINK_USB is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RT2880=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PINCTRL_SX150X=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_RALINK=y
+# CONFIG_RALINK_WDT is not set
+CONFIG_RATIONAL=y
+CONFIG_RCU_NEED_SEGCBLIST=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BQ32K=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_SCHED_SMT=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SMP=y
+CONFIG_SMP_UP=y
+CONFIG_SOC_BUS=y
+# CONFIG_SOC_MT7620 is not set
+CONFIG_SOC_MT7621=y
+# CONFIG_SOC_RT288X is not set
+# CONFIG_SOC_RT305X is not set
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_MT7621=y
+# CONFIG_SPI_RT2880 is not set
+CONFIG_SRCU=y
+CONFIG_SWPHY=y
+CONFIG_SYNC_R4K=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_MIPS_CPS=y
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+CONFIG_SYS_SUPPORTS_SCHED_SMT=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_TARGET_ISA_REV=2
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_WEAK_ORDERING=y
+CONFIG_WEAK_REORDERING_BEYOND_LLSC=y
+CONFIG_XPS=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
--- /dev/null
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_AT803X_PHY=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_SYSTICK_QUIRK=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKEVT_RT3352=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_DIEI=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CSRC_R4K=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_MT7620A_EVAL is not set
+# CONFIG_DTB_OMEGA2P is not set
+CONFIG_DTB_RT_NONE=y
+# CONFIG_DTB_VOCORE2 is not set
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_LIB_ASHLDI3=y
+CONFIG_GENERIC_LIB_ASHRDI3=y
+CONFIG_GENERIC_LIB_CMPDI2=y
+CONFIG_GENERIC_LIB_LSHRDI3=y
+CONFIG_GENERIC_LIB_UCMPDI2=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_MT7621=y
+# CONFIG_GPIO_RALINK is not set
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HZ=250
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+# CONFIG_KERNEL_ZSTD is not set
+CONFIG_LIBFDT=y
+CONFIG_LLD_VERSION=0
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGRATION=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CBPF_JIT=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_LD_CAN_LINK_VDSO=y
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_MIPS_SPRAM=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MT7621_WDT=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_TPLINK_FW=y
+CONFIG_MTD_SPLIT_TRX_FW=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK_ESW_RT3050=y
+# CONFIG_NET_RALINK_MT7620 is not set
+CONFIG_NET_RALINK_RT3050=y
+CONFIG_NET_RALINK_SOC=y
+# CONFIG_NET_VENDOR_MEDIATEK is not set
+CONFIG_NET_VENDOR_RALINK=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
+# CONFIG_PCI_MT7621 is not set
+# CONFIG_PCI_MT7621_PHY is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHY_RALINK_USB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RT2880=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_RALINK=y
+# CONFIG_RALINK_WDT is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SOC_MT7620=y
+# CONFIG_SOC_MT7621 is not set
+# CONFIG_SOC_RT288X is not set
+# CONFIG_SOC_RT305X is not set
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_MT7621=y
+# CONFIG_SPI_RT2880 is not set
+CONFIG_SRCU=y
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_LEDS=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_TARGET_ISA_REV=2
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
--- /dev/null
+From 3f9ef7785a9cd69cb75f5e2ea4ca79a24752e496 Mon Sep 17 00:00:00 2001
+From: Sander Vanheule <sander@svanheule.net>
+Date: Wed, 3 Feb 2021 10:21:41 +0100
+Subject: MIPS: ralink: manage low reset lines
+
+Reset lines with indices smaller than 8 are currently considered invalid
+by the rt2880-reset reset controller.
+
+The MT7621 SoC uses a number of these low reset lines. The DTS defines
+reset lines "hsdma", "fe", and "mcm" with respective values 5, 6, and 2.
+As a result of the above restriction, these resets cannot be asserted or
+de-asserted by the reset controller. In cases where the bootloader does
+not de-assert these lines, this results in e.g. the MT7621's internal
+switch staying in reset.
+
+Change the reset controller to only ignore the system reset, so all
+reset lines with index greater than 0 are considered valid.
+
+Signed-off-by: Sander Vanheule <sander@svanheule.net>
+Acked-by: John Crispin <john@phrozen.org>
+Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+---
+ arch/mips/ralink/reset.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/ralink/reset.c
++++ b/arch/mips/ralink/reset.c
+@@ -27,7 +27,7 @@ static int ralink_assert_device(struct r
+ {
+ u32 val;
+
+- if (id < 8)
++ if (id == 0)
+ return -1;
+
+ val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
+@@ -42,7 +42,7 @@ static int ralink_deassert_device(struct
+ {
+ u32 val;
+
+- if (id < 8)
++ if (id == 0)
+ return -1;
+
+ val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
--- /dev/null
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -158,6 +158,7 @@ source "drivers/net/ethernet/pasemi/Kcon
+ source "drivers/net/ethernet/pensando/Kconfig"
+ source "drivers/net/ethernet/qlogic/Kconfig"
+ source "drivers/net/ethernet/qualcomm/Kconfig"
++source "drivers/net/ethernet/ralink/Kconfig"
+ source "drivers/net/ethernet/rdc/Kconfig"
+ source "drivers/net/ethernet/realtek/Kconfig"
+ source "drivers/net/ethernet/renesas/Kconfig"
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -71,6 +71,7 @@ obj-$(CONFIG_NET_VENDOR_PACKET_ENGINES)
+ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
+ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
+ obj-$(CONFIG_NET_VENDOR_QUALCOMM) += qualcomm/
++obj-$(CONFIG_NET_VENDOR_RALINK) += ralink/
+ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
+ obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/
+ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
--- /dev/null
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -57,6 +57,7 @@ choice
+ select CLKSRC_MIPS_GIC
+ select HAVE_PCI if PCI_MT7621
+ select SOC_BUS
++ select WEAK_REORDERING_BEYOND_LLSC
+ endchoice
+
+ choice
--- /dev/null
+--- a/drivers/staging/mt7621-pci-phy/Kconfig
++++ b/drivers/staging/mt7621-pci-phy/Kconfig
+@@ -3,6 +3,7 @@ config PCI_MT7621_PHY
+ tristate "MediaTek MT7621 PCI PHY Driver"
+ depends on RALINK && OF
+ select GENERIC_PHY
++ select REGMAP_MMIO
+ help
+ Say 'Y' here to add support for MediaTek MT7621 PCI PHY driver,
+
--- /dev/null
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
+@@ -135,4 +135,16 @@ static inline int mt7620_get_eco(void)
+ return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK;
+ }
+
++static inline int mt7620_get_chipver(void)
++{
++ return (rt_sysc_r32(SYSC_REG_CHIP_REV) >> CHIP_REV_VER_SHIFT) &
++ CHIP_REV_VER_MASK;
++}
++
++static inline int mt7620_get_pkg(void)
++{
++ return (rt_sysc_r32(SYSC_REG_CHIP_REV) >> CHIP_REV_PKG_SHIFT) &
++ CHIP_REV_PKG_MASK;
++}
++
+ #endif
--- /dev/null
+From: Tobias Wolf <dev-NTEO@vplace.de>
+Subject: [v2] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups
+
+Commit 67a3ba25aa95 ("MIPS: Fix incorrect mem=X@Y handling") introduced a new
+issue for rt288x where "PHYS_OFFSET" is 0x0 but the calculated "ramstart" is
+not. As the prerequisite of custom memory map has been removed, this results
+in the full memory range of 0x0 - 0x8000000 to be marked as reserved for this
+platform.
+
+v2: Correctly compare that usermem is not null.
+
+This patch adds the originally intended prerequisite again.
+
+Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
+---
+
+--- a/arch/mips/kernel/setup.c
++++ b/arch/mips/kernel/setup.c
+@@ -249,6 +249,8 @@ static unsigned long __init init_initrd(
+ * Initialize the bootmem allocator. It also setup initrd related data
+ * if needed.
+ */
++static int usermem __initdata;
++
+ #if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON64) && defined(CONFIG_NUMA))
+
+ static void __init bootmem_init(void)
+@@ -288,7 +290,7 @@ static void __init bootmem_init(void)
+ /*
+ * Reserve any memory between the start of RAM and PHYS_OFFSET
+ */
+- if (ramstart > PHYS_OFFSET)
++ if (usermem && ramstart > PHYS_OFFSET)
+ memblock_reserve(PHYS_OFFSET, ramstart - PHYS_OFFSET);
+
+ if (PFN_UP(ramstart) > ARCH_PFN_OFFSET) {
+@@ -336,8 +338,6 @@ static void __init bootmem_init(void)
+
+ #endif /* CONFIG_SGI_IP27 */
+
+-static int usermem __initdata;
+-
+ static int __init early_parse_mem(char *p)
+ {
+ phys_addr_t start, size;
--- /dev/null
+From ce3d4a4111a5f7e6b4e74bceae5faa6ce388e8ec Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 14 Jul 2013 23:08:11 +0200
+Subject: [PATCH 05/53] MIPS: use set_mode() to enable/disable the cevt-r4k
+ irq
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Kconfig | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -1,12 +1,17 @@
+ # SPDX-License-Identifier: GPL-2.0
+ if RALINK
+
++config CEVT_SYSTICK_QUIRK
++ bool
++ default n
++
+ config CLKEVT_RT3352
+ bool
+ depends on SOC_RT305X || SOC_MT7620
+ default y
+ select TIMER_OF
+ select CLKSRC_MMIO
++ select CEVT_SYSTICK_QUIRK
+
+ config RALINK_ILL_ACC
+ bool
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -16,6 +16,31 @@
+ #include <asm/time.h>
+ #include <asm/cevt-r4k.h>
+
++#ifdef CONFIG_CEVT_SYSTICK_QUIRK
++static int mips_state_oneshot(struct clock_event_device *evt)
++{
++ unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
++ if (!cp0_timer_irq_installed) {
++ cp0_timer_irq_installed = 1;
++ if (request_irq(evt->irq, c0_compare_interrupt, flags, "timer",
++ c0_compare_interrupt))
++ pr_err("Failed to request irq %d (timer)\n", evt->irq);
++ }
++
++ return 0;
++}
++
++static int mips_state_shutdown(struct clock_event_device *evt)
++{
++ if (cp0_timer_irq_installed) {
++ cp0_timer_irq_installed = 0;
++ free_irq(evt->irq, NULL);
++ }
++
++ return 0;
++}
++#endif
++
+ static int mips_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+ {
+@@ -296,7 +321,9 @@ core_initcall(r4k_register_cpufreq_notif
+
+ int r4k_clockevent_init(void)
+ {
++#ifndef CONFIG_CEVT_SYSTICK_QUIRK
+ unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
++#endif
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd;
+ unsigned int irq, min_delta;
+@@ -326,11 +353,16 @@ int r4k_clockevent_init(void)
+ cd->rating = 300;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of(cpu);
++#ifdef CONFIG_CEVT_SYSTICK_QUIRK
++ cd->set_state_shutdown = mips_state_shutdown;
++ cd->set_state_oneshot = mips_state_oneshot;
++#endif
+ cd->set_next_event = mips_next_event;
+ cd->event_handler = mips_event_handler;
+
+ clockevents_config_and_register(cd, mips_hpt_frequency, min_delta, 0x7fffffff);
+
++#ifndef CONFIG_CEVT_SYSTICK_QUIRK
+ if (cp0_timer_irq_installed)
+ return 0;
+
+@@ -339,6 +371,7 @@ int r4k_clockevent_init(void)
+ if (request_irq(irq, c0_compare_interrupt, flags, "timer",
+ c0_compare_interrupt))
+ pr_err("Failed to request irq %d (timer)\n", irq);
++#endif
+
+ return 0;
+ }
--- /dev/null
+From bd30f19a006fb52bac80c6463c49dd2f4159f4ac Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 28 Jul 2013 16:26:41 +0200
+Subject: [PATCH 06/53] MIPS: ralink: add cpu frequency scaling
+
+This feature will break udelay() and cause the delay loop to have longer delays
+when the frequency is scaled causing a performance hit.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/cevt-rt3352.c | 38 ++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+
+--- a/arch/mips/ralink/cevt-rt3352.c
++++ b/arch/mips/ralink/cevt-rt3352.c
+@@ -29,6 +29,10 @@
+ /* enable the counter */
+ #define CFG_CNT_EN 0x1
+
++/* mt7620 frequency scaling defines */
++#define CLK_LUT_CFG 0x40
++#define SLEEP_EN BIT(31)
++
+ struct systick_device {
+ void __iomem *membase;
+ struct clock_event_device dev;
+@@ -36,21 +40,53 @@ struct systick_device {
+ int freq_scale;
+ };
+
++static void (*systick_freq_scaling)(struct systick_device *sdev, int status);
++
+ static int systick_set_oneshot(struct clock_event_device *evt);
+ static int systick_shutdown(struct clock_event_device *evt);
+
++static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
++{
++ if (sdev->freq_scale == status)
++ return;
++
++ sdev->freq_scale = status;
++
++ pr_info("%s: %s autosleep mode\n", sdev->dev.name,
++ (status) ? ("enable") : ("disable"));
++ if (status)
++ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
++ else
++ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
++}
++
++static inline unsigned int read_count(struct systick_device *sdev)
++{
++ return ioread32(sdev->membase + SYSTICK_COUNT);
++}
++
++static inline unsigned int read_compare(struct systick_device *sdev)
++{
++ return ioread32(sdev->membase + SYSTICK_COMPARE);
++}
++
++static inline void write_compare(struct systick_device *sdev, unsigned int val)
++{
++ iowrite32(val, sdev->membase + SYSTICK_COMPARE);
++}
++
+ static int systick_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+ {
+ struct systick_device *sdev;
+- u32 count;
++ int res;
+
+ sdev = container_of(evt, struct systick_device, dev);
+- count = ioread32(sdev->membase + SYSTICK_COUNT);
+- count = (count + delta) % SYSTICK_FREQ;
+- iowrite32(count, sdev->membase + SYSTICK_COMPARE);
++ delta += read_count(sdev);
++ write_compare(sdev, delta);
++ res = ((int)(read_count(sdev) - delta) >= 0) ? -ETIME : 0;
+
+- return 0;
++ return res;
+ }
+
+ static void systick_event_handler(struct clock_event_device *dev)
+@@ -60,20 +96,25 @@ static void systick_event_handler(struct
+
+ static irqreturn_t systick_interrupt(int irq, void *dev_id)
+ {
+- struct clock_event_device *dev = (struct clock_event_device *) dev_id;
++ int ret = 0;
++ struct clock_event_device *cdev;
++ struct systick_device *sdev;
+
+- dev->event_handler(dev);
++ if (read_c0_cause() & STATUSF_IP7) {
++ cdev = (struct clock_event_device *) dev_id;
++ sdev = container_of(cdev, struct systick_device, dev);
++
++ /* Clear Count/Compare Interrupt */
++ write_compare(sdev, read_compare(sdev));
++ cdev->event_handler(cdev);
++ ret = 1;
++ }
+
+- return IRQ_HANDLED;
++ return IRQ_RETVAL(ret);
+ }
+
+ static struct systick_device systick = {
+ .dev = {
+- /*
+- * cevt-r4k uses 300, make sure systick
+- * gets used if available
+- */
+- .rating = 310,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = systick_next_event,
+ .set_state_shutdown = systick_shutdown,
+@@ -91,7 +132,13 @@ static int systick_shutdown(struct clock
+ if (sdev->irq_requested)
+ free_irq(systick.dev.irq, &systick.dev);
+ sdev->irq_requested = 0;
+- iowrite32(0, systick.membase + SYSTICK_CONFIG);
++ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
++
++ if (systick_freq_scaling)
++ systick_freq_scaling(sdev, 0);
++
++ if (systick_freq_scaling)
++ systick_freq_scaling(sdev, 1);
+
+ return 0;
+ }
+@@ -116,33 +163,46 @@ static int systick_set_oneshot(struct cl
+ return 0;
+ }
+
++static const struct of_device_id systick_match[] = {
++ { .compatible = "ralink,mt7620a-systick", .data = mt7620_freq_scaling},
++ {},
++};
++
+ static int __init ralink_systick_init(struct device_node *np)
+ {
+- int ret;
++ const struct of_device_id *match;
++ int rating = 200;
+
+ systick.membase = of_iomap(np, 0);
+ if (!systick.membase)
+ return -ENXIO;
+
+- systick.dev.name = np->name;
+- clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
+- systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
+- systick.dev.max_delta_ticks = 0x7fff;
+- systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
+- systick.dev.min_delta_ticks = 0x3;
++ match = of_match_node(systick_match, np);
++ if (match) {
++ systick_freq_scaling = match->data;
++ /*
++ * cevt-r4k uses 300, make sure systick
++ * gets used if available
++ */
++ rating = 310;
++ }
++
++ /* enable counter than register clock source */
++ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
++ clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
++ SYSTICK_FREQ, rating, 16, clocksource_mmio_readl_up);
++
++ /* register clock event */
+ systick.dev.irq = irq_of_parse_and_map(np, 0);
+ if (!systick.dev.irq) {
+ pr_err("%pOFn: request_irq failed", np);
+ return -EINVAL;
+ }
+
+- ret = clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
+- SYSTICK_FREQ, 301, 16,
+- clocksource_mmio_readl_up);
+- if (ret)
+- return ret;
+-
+- clockevents_register_device(&systick.dev);
++ systick.dev.name = np->name;
++ systick.dev.rating = rating;
++ systick.dev.cpumask = cpumask_of(0);
++ clockevents_config_and_register(&systick.dev, SYSTICK_FREQ, 0x3, 0x7fff);
+
+ pr_info("%pOFn: running - mult: %d, shift: %d\n",
+ np, systick.dev.mult, systick.dev.shift);
--- /dev/null
+From 67b7bff0fd364c194e653f69baa623ba2141bd4c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 4 Aug 2014 18:46:02 +0200
+Subject: [PATCH 07/53] MIPS: ralink: copy the commandline from the devicetree
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/of.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -80,6 +80,8 @@ void __init plat_mem_setup(void)
+
+ __dt_setup_arch(dtb);
+
++ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
++
+ of_scan_flat_dt(early_init_dt_find_memory, NULL);
+ if (memory_dtb)
+ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
--- /dev/null
+From f15d27f9c90ede4b16eb37f9ae573ef81c2b6996 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Thu, 31 Dec 2020 18:49:12 +0100
+Subject: [PATCH] MIPS: add bootargs-override property
+
+Add support for the bootargs-override property to the chosen node
+similar to the one used on ipq806x or mpc85xx.
+
+This is necessary, as the U-Boot used on some boards, notably the
+Ubiquiti UniFi 6 Lite, overwrite the bootargs property of the chosen
+node leading to a kernel panic when loading OpenWrt.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ arch/mips/kernel/setup.c | 30 ++++++++++++++++++++++++++++++
+ 1 file changed, 30 insertions(+)
+
+--- a/arch/mips/kernel/setup.c
++++ b/arch/mips/kernel/setup.c
+@@ -542,8 +542,28 @@ static int __init bootcmdline_scan_chose
+
+ #endif /* CONFIG_OF_EARLY_FLATTREE */
+
++static int __init bootcmdline_scan_chosen_override(unsigned long node, const char *uname,
++ int depth, void *data)
++{
++ bool *dt_bootargs = data;
++ const char *p;
++ int l;
++
++ if (depth != 1 || !data || strcmp(uname, "chosen") != 0)
++ return 0;
++
++ p = of_get_flat_dt_prop(node, "bootargs-override", &l);
++ if (p != NULL && l > 0) {
++ strlcpy(boot_command_line, p, COMMAND_LINE_SIZE);
++ *dt_bootargs = true;
++ }
++
++ return 1;
++}
++
+ static void __init bootcmdline_init(void)
+ {
++ bool dt_bootargs_override = false;
+ bool dt_bootargs = false;
+
+ /*
+@@ -557,6 +577,14 @@ static void __init bootcmdline_init(void
+ }
+
+ /*
++ * If bootargs-override in the chosen node is set, use this as the
++ * command line
++ */
++ of_scan_flat_dt(bootcmdline_scan_chosen_override, &dt_bootargs_override);
++ if (dt_bootargs_override)
++ return;
++
++ /*
+ * If the user specified a built-in command line &
+ * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is
+ * prepended to arguments from the bootloader or DT so we'll copy them
--- /dev/null
+From 5ede027f6c4a57ed25da872420508b7f1168b36b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:15:32 +0100
+Subject: [PATCH 13/53] owrt: hack: fix mt7688 cache issue
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/kernel/setup.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/kernel/setup.c
++++ b/arch/mips/kernel/setup.c
+@@ -694,8 +694,6 @@ static void __init arch_mem_init(char **
+ if (crashk_res.start != crashk_res.end)
+ memblock_reserve(crashk_res.start, resource_size(&crashk_res));
+ #endif
+- device_tree_init();
+-
+ /*
+ * In order to reduce the possibility of kernel panic when failed to
+ * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate
+@@ -815,6 +813,7 @@ void __init setup_arch(char **cmdline_p)
+
+ cpu_cache_init();
+ paging_init();
++ device_tree_init();
+ }
+
+ unsigned long kernelsp[NR_CPUS];
--- /dev/null
+From 9e6ce539092a1dd605a20bf73c655a9de58d8641 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:18:05 +0100
+Subject: [PATCH 15/53] arch: mips: do not select illegal access driver by
+ default
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Kconfig | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -14,9 +14,9 @@ config CLKEVT_RT3352
+ select CEVT_SYSTICK_QUIRK
+
+ config RALINK_ILL_ACC
+- bool
++ bool "illegal access irq"
+ depends on SOC_RT305X
+- default y
++ default n
+
+ config IRQ_INTC
+ bool
--- /dev/null
+There is a variant of MT7621 which contains only one CPU core instead of 2.
+This is not reflected in the config register, so the kernel detects more
+physical cores, which leads to a hang on SMP bringup.
+Add a hack to detect missing cores.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+
+--- a/arch/mips/kernel/smp-cps.c
++++ b/arch/mips/kernel/smp-cps.c
+@@ -43,6 +43,11 @@ static unsigned core_vpe_count(unsigned
+ return mips_cps_numvps(cluster, core);
+ }
+
++bool __weak plat_cpu_core_present(int core)
++{
++ return true;
++}
++
+ static void __init cps_smp_setup(void)
+ {
+ unsigned int nclusters, ncores, nvpes, core_vpes;
+@@ -60,6 +65,8 @@ static void __init cps_smp_setup(void)
+
+ ncores = mips_cps_numcores(cl);
+ for (c = 0; c < ncores; c++) {
++ if (!plat_cpu_core_present(c))
++ continue;
+ core_vpes = core_vpe_count(cl, c);
+
+ if (c > 0)
+--- a/arch/mips/ralink/mt7621.c
++++ b/arch/mips/ralink/mt7621.c
+@@ -15,6 +15,7 @@
+ #include <asm/mips-cps.h>
+ #include <asm/mach-ralink/ralink_regs.h>
+ #include <asm/mach-ralink/mt7621.h>
++#include <asm/mips-boards/launch.h>
+
+ #include <pinmux.h>
+
+@@ -146,6 +147,20 @@ static void soc_dev_init(struct ralink_s
+ }
+ }
+
++bool plat_cpu_core_present(int core)
++{
++ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
++
++ if (!core)
++ return true;
++ launch += core * 2; /* 2 VPEs per core */
++ if (!(launch->flags & LAUNCH_FREADY))
++ return false;
++ if (launch->flags & (LAUNCH_FGO | LAUNCH_FGONE))
++ return false;
++ return true;
++}
++
+ void prom_soc_init(struct ralink_soc_info *soc_info)
+ {
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
--- /dev/null
+--- a/arch/mips/ralink/mt7621.c
++++ b/arch/mips/ralink/mt7621.c
+@@ -9,6 +9,7 @@
+ #include <linux/init.h>
+ #include <linux/slab.h>
+ #include <linux/sys_soc.h>
++#include <linux/jiffies.h>
+
+ #include <asm/mipsregs.h>
+ #include <asm/smp-ops.h>
+@@ -16,6 +17,7 @@
+ #include <asm/mach-ralink/ralink_regs.h>
+ #include <asm/mach-ralink/mt7621.h>
+ #include <asm/mips-boards/launch.h>
++#include <asm/delay.h>
+
+ #include <pinmux.h>
+
+@@ -161,6 +163,58 @@ bool plat_cpu_core_present(int core)
+ return true;
+ }
+
++#define LPS_PREC 8
++/*
++* Re-calibration lpj(loop-per-jiffy).
++* (derived from kernel/calibrate.c)
++*/
++static int udelay_recal(void)
++{
++ unsigned int i, lpj = 0;
++ unsigned long ticks, loopbit;
++ int lps_precision = LPS_PREC;
++
++ lpj = (1<<12);
++
++ while ((lpj <<= 1) != 0) {
++ /* wait for "start of" clock tick */
++ ticks = jiffies;
++ while (ticks == jiffies)
++ /* nothing */;
++
++ /* Go .. */
++ ticks = jiffies;
++ __delay(lpj);
++ ticks = jiffies - ticks;
++ if (ticks)
++ break;
++ }
++
++ /*
++ * Do a binary approximation to get lpj set to
++ * equal one clock (up to lps_precision bits)
++ */
++ lpj >>= 1;
++ loopbit = lpj;
++ while (lps_precision-- && (loopbit >>= 1)) {
++ lpj |= loopbit;
++ ticks = jiffies;
++ while (ticks == jiffies)
++ /* nothing */;
++ ticks = jiffies;
++ __delay(lpj);
++ if (jiffies != ticks) /* longer than 1 tick */
++ lpj &= ~loopbit;
++ }
++ printk(KERN_INFO "%d CPUs re-calibrate udelay(lpj = %d)\n", NR_CPUS, lpj);
++
++ for(i=0; i< NR_CPUS; i++)
++ cpu_data[i].udelay_val = lpj;
++
++ return 0;
++}
++device_initcall(udelay_recal);
++
+ void prom_soc_init(struct ralink_soc_info *soc_info)
+ {
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -63,6 +63,7 @@ choice
+ select HAVE_PCI if PCI_MT7621
+ select SOC_BUS
+ select WEAK_REORDERING_BEYOND_LLSC
++ select GENERIC_CLOCKEVENTS_BROADCAST
+ endchoice
+
+ choice
--- /dev/null
+--- a/arch/mips/include/asm/mach-ralink/mt7621.h
++++ b/arch/mips/include/asm/mach-ralink/mt7621.h
+@@ -17,6 +17,10 @@
+ #define SYSC_REG_CHIP_REV 0x0c
+ #define SYSC_REG_SYSTEM_CONFIG0 0x10
+ #define SYSC_REG_SYSTEM_CONFIG1 0x14
++#define SYSC_REG_CLKCFG0 0x2c
++#define SYSC_REG_CUR_CLK_STS 0x44
++
++#define MEMC_REG_CPU_PLL 0x648
+
+ #define CHIP_REV_PKG_MASK 0x1
+ #define CHIP_REV_PKG_SHIFT 16
+@@ -24,6 +28,22 @@
+ #define CHIP_REV_VER_SHIFT 8
+ #define CHIP_REV_ECO_MASK 0xf
+
++#define XTAL_MODE_SEL_MASK 0x7
++#define XTAL_MODE_SEL_SHIFT 6
++
++#define CPU_CLK_SEL_MASK 0x3
++#define CPU_CLK_SEL_SHIFT 30
++
++#define CUR_CPU_FDIV_MASK 0x1f
++#define CUR_CPU_FDIV_SHIFT 8
++#define CUR_CPU_FFRAC_MASK 0x1f
++#define CUR_CPU_FFRAC_SHIFT 0
++
++#define CPU_PLL_PREDIV_MASK 0x3
++#define CPU_PLL_PREDIV_SHIFT 12
++#define CPU_PLL_FBDIV_MASK 0x7f
++#define CPU_PLL_FBDIV_SHIFT 4
++
+ #define MT7621_DRAM_BASE 0x0
+ #define MT7621_DDR2_SIZE_MIN 32
+ #define MT7621_DDR2_SIZE_MAX 256
+--- a/arch/mips/ralink/mt7621.c
++++ b/arch/mips/ralink/mt7621.c
+@@ -10,6 +10,10 @@
+ #include <linux/slab.h>
+ #include <linux/sys_soc.h>
+ #include <linux/jiffies.h>
++#include <linux/clk.h>
++#include <linux/clkdev.h>
++#include <linux/clk-provider.h>
++#include <dt-bindings/clock/mt7621-clk.h>
+
+ #include <asm/mipsregs.h>
+ #include <asm/smp-ops.h>
+@@ -18,6 +22,7 @@
+ #include <asm/mach-ralink/mt7621.h>
+ #include <asm/mips-boards/launch.h>
+ #include <asm/delay.h>
++#include <asm/time.h>
+
+ #include <pinmux.h>
+
+@@ -108,11 +113,89 @@ static struct rt2880_pmx_group mt7621_pi
+ { 0 }
+ };
+
++static struct clk *clks[MT7621_CLK_MAX];
++static struct clk_onecell_data clk_data = {
++ .clks = clks,
++ .clk_num = ARRAY_SIZE(clks),
++};
++
+ phys_addr_t mips_cpc_default_phys_base(void)
+ {
+ panic("Cannot detect cpc address");
+ }
+
++static struct clk *__init mt7621_add_sys_clkdev(
++ const char *id, unsigned long rate)
++{
++ struct clk *clk;
++ int err;
++
++ clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
++ if (IS_ERR(clk))
++ panic("failed to allocate %s clock structure", id);
++
++ err = clk_register_clkdev(clk, id, NULL);
++ if (err)
++ panic("unable to register %s clock device", id);
++
++ return clk;
++}
++
++void __init ralink_clk_init(void)
++{
++ u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac;
++ u32 pll, prediv, fbdiv;
++ u32 xtal_clk, cpu_clk, bus_clk;
++ const static u32 prediv_tbl[] = {0, 1, 2, 2};
++
++ syscfg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
++ xtal_sel = (syscfg >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK;
++
++ clkcfg = rt_sysc_r32(SYSC_REG_CLKCFG0);
++ clk_sel = (clkcfg >> CPU_CLK_SEL_SHIFT) & CPU_CLK_SEL_MASK;
++
++ curclk = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
++ ffiv = (curclk >> CUR_CPU_FDIV_SHIFT) & CUR_CPU_FDIV_MASK;
++ ffrac = (curclk >> CUR_CPU_FFRAC_SHIFT) & CUR_CPU_FFRAC_MASK;
++
++ if (xtal_sel <= 2)
++ xtal_clk = 20 * 1000 * 1000;
++ else if (xtal_sel <= 5)
++ xtal_clk = 40 * 1000 * 1000;
++ else
++ xtal_clk = 25 * 1000 * 1000;
++
++ switch (clk_sel) {
++ case 0:
++ cpu_clk = 500 * 1000 * 1000;
++ break;
++ case 1:
++ pll = rt_memc_r32(MEMC_REG_CPU_PLL);
++ fbdiv = (pll >> CPU_PLL_FBDIV_SHIFT) & CPU_PLL_FBDIV_MASK;
++ prediv = (pll >> CPU_PLL_PREDIV_SHIFT) & CPU_PLL_PREDIV_MASK;
++ cpu_clk = ((fbdiv + 1) * xtal_clk) >> prediv_tbl[prediv];
++ break;
++ default:
++ cpu_clk = xtal_clk;
++ }
++
++ cpu_clk = cpu_clk / ffiv * ffrac;
++ bus_clk = cpu_clk / 4;
++
++ clks[MT7621_CLK_CPU] = mt7621_add_sys_clkdev("cpu", cpu_clk);
++ clks[MT7621_CLK_BUS] = mt7621_add_sys_clkdev("bus", bus_clk);
++
++ pr_info("CPU Clock: %dMHz\n", cpu_clk / 1000000);
++ mips_hpt_frequency = cpu_clk / 2;
++}
++
++static void __init mt7621_clocks_init_dt(struct device_node *np)
++{
++ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
++}
++
++CLK_OF_DECLARE(mt7621, "mediatek,mt7621-pll", mt7621_clocks_init_dt);
++
+ void __init ralink_of_remap(void)
+ {
+ rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
+--- a/arch/mips/ralink/timer-gic.c
++++ b/arch/mips/ralink/timer-gic.c
+@@ -9,14 +9,14 @@
+
+ #include <linux/of.h>
+ #include <linux/of_clk.h>
+-#include <linux/clocksource.h>
++#include <asm/time.h>
+
+ #include "common.h"
+
+ void __init plat_time_init(void)
+ {
+ ralink_of_remap();
+-
++ ralink_clk_init();
+ of_clk_init(NULL);
+ timer_probe();
+ }
+--- /dev/null
++++ b/include/dt-bindings/clock/mt7621-clk.h
+@@ -0,0 +1,18 @@
++/*
++ * Copyright (C) 2018 Weijie Gao <hackpascal@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#ifndef __DT_BINDINGS_MT7621_CLK_H
++#define __DT_BINDINGS_MT7621_CLK_H
++
++#define MT7621_CLK_CPU 0
++#define MT7621_CLK_BUS 1
++
++#define MT7621_CLK_MAX 2
++
++#endif /* __DT_BINDINGS_MT7621_CLK_H */
--- /dev/null
+From b5a52351a66f3c2a7a207548aa87d78ff2d336c0 Mon Sep 17 00:00:00 2001
+From: Chuanhong Guo <gch981213@gmail.com>
+Date: Wed, 10 Jul 2019 00:24:48 +0800
+Subject: [PATCH] MIPS: ralink: mt7621: add memory detection support
+
+mt7621 has the following memory map:
+0x0-0x1c000000: lower 448m memory
+0x1c000000-0x2000000: peripheral registers
+0x20000000-0x2400000: higher 64m memory
+
+detect_memory_region in arch/mips/kernel/setup.c only add the first
+memory region and isn't suitable for 512m memory detection because
+it may accidentally read the memory area for peripheral registers.
+
+This commit adds memory detection capability for mt7621:
+1. add the highmem area when 512m is detected.
+2. guard memcmp from accessing peripheral registers:
+ This only happens when some weird user decided to change
+ kernel load address to 256m or higher address. Since this
+ is a quite unusual case, we just skip 512m testing and return
+ 256m as memory size.
+
+Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
+---
+ arch/mips/include/asm/mach-ralink/mt7621.h | 7 ++---
+ arch/mips/ralink/mt7621.c | 30 +++++++++++++++++++---
+ 2 files changed, 30 insertions(+), 7 deletions(-)
+
+--- a/arch/mips/include/asm/mach-ralink/mt7621.h
++++ b/arch/mips/include/asm/mach-ralink/mt7621.h
+@@ -44,9 +44,10 @@
+ #define CPU_PLL_FBDIV_MASK 0x7f
+ #define CPU_PLL_FBDIV_SHIFT 4
+
+-#define MT7621_DRAM_BASE 0x0
+-#define MT7621_DDR2_SIZE_MIN 32
+-#define MT7621_DDR2_SIZE_MAX 256
++#define MT7621_LOWMEM_BASE 0x0
++#define MT7621_LOWMEM_MAX_SIZE 0x1C000000
++#define MT7621_HIGHMEM_BASE 0x20000000
++#define MT7621_HIGHMEM_SIZE 0x4000000
+
+ #define MT7621_CHIP_NAME0 0x3637544D
+ #define MT7621_CHIP_NAME1 0x20203132
+--- a/arch/mips/ralink/mt7621.c
++++ b/arch/mips/ralink/mt7621.c
+@@ -10,11 +10,13 @@
+ #include <linux/slab.h>
+ #include <linux/sys_soc.h>
+ #include <linux/jiffies.h>
++#include <linux/memblock.h>
+ #include <linux/clk.h>
+ #include <linux/clkdev.h>
+ #include <linux/clk-provider.h>
+ #include <dt-bindings/clock/mt7621-clk.h>
+
++#include <asm/bootinfo.h>
+ #include <asm/mipsregs.h>
+ #include <asm/smp-ops.h>
+ #include <asm/mips-cps.h>
+@@ -57,6 +59,8 @@
+ #define MT7621_GPIO_MODE_SDHCI_SHIFT 18
+ #define MT7621_GPIO_MODE_SDHCI_GPIO 1
+
++static void *detect_magic __initdata = detect_memory_region;
++
+ static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
+ static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
+ static struct rt2880_pmx_func uart3_grp[] = {
+@@ -141,6 +145,26 @@ static struct clk *__init mt7621_add_sys
+ return clk;
+ }
+
++void __init mt7621_memory_detect(void)
++{
++ void *dm = &detect_magic;
++ phys_addr_t size;
++
++ for (size = 32 * SZ_1M; size < 256 * SZ_1M; size <<= 1) {
++ if (!__builtin_memcmp(dm, dm + size, sizeof(detect_magic)))
++ break;
++ }
++
++ if ((size == 256 * SZ_1M) &&
++ (CPHYSADDR(dm + size) < MT7621_LOWMEM_MAX_SIZE) &&
++ __builtin_memcmp(dm, dm + size, sizeof(detect_magic))) {
++ memblock_add(MT7621_LOWMEM_BASE, MT7621_LOWMEM_MAX_SIZE);
++ memblock_add(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE);
++ } else {
++ memblock_add(MT7621_LOWMEM_BASE, size);
++ }
++}
++
+ void __init ralink_clk_init(void)
+ {
+ u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac;
+@@ -346,10 +370,7 @@ void prom_soc_init(struct ralink_soc_inf
+ (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
+ (rev & CHIP_REV_ECO_MASK));
+
+- soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
+- soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
+- soc_info->mem_base = MT7621_DRAM_BASE;
+-
++ soc_info->mem_detect = mt7621_memory_detect;
+ rt2880_pinmux_data = mt7621_pinmux_data;
+
+ soc_dev_init(soc_info, rev);
+--- a/arch/mips/ralink/common.h
++++ b/arch/mips/ralink/common.h
+@@ -17,6 +17,7 @@ struct ralink_soc_info {
+ unsigned long mem_size;
+ unsigned long mem_size_min;
+ unsigned long mem_size_max;
++ void (*mem_detect)(void);
+ };
+ extern struct ralink_soc_info soc_info;
+
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -85,6 +85,8 @@ void __init plat_mem_setup(void)
+ of_scan_flat_dt(early_init_dt_find_memory, NULL);
+ if (memory_dtb)
+ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
++ else if (soc_info.mem_detect)
++ soc_info.mem_detect();
+ else if (soc_info.mem_size)
+ memblock_add(soc_info.mem_base, soc_info.mem_size * SZ_1M);
+ else
--- /dev/null
+--- a/arch/mips/ralink/irq-gic.c
++++ b/arch/mips/ralink/irq-gic.c
+@@ -13,6 +13,12 @@
+
+ int get_c0_perfcount_int(void)
+ {
++ /*
++ * Performance counter events are routed through GIC.
++ * Prevent them from firing on CPU IRQ7 as well
++ */
++ clear_c0_status(IE_SW0 << 7);
++
+ return gic_get_c0_perfcount_int();
+ }
+ EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
--- /dev/null
+--- a/arch/mips/pci/pci-mt7620.c
++++ b/arch/mips/pci/pci-mt7620.c
+@@ -32,6 +32,7 @@
+ #define PPLL_CFG1 0x9c
+
+ #define PPLL_DRV 0xa0
++#define PPLL_LD BIT(23)
+ #define PDRV_SW_SET BIT(31)
+ #define LC_CKDRVPD BIT(19)
+ #define LC_CKDRVOHZ BIT(18)
+@@ -239,8 +240,8 @@ static int mt7620_pci_hw_init(struct pla
+ rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
+ mdelay(100);
+
+- if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) {
+- dev_err(&pdev->dev, "MT7620 PPLL unlock\n");
++ if (!(rt_sysc_r32(PPLL_CFG1) & PPLL_LD)) {
++ dev_err(&pdev->dev, "MT7620 PPLL is unlocked, aborting init\n");
+ reset_control_assert(rstpcie0);
+ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
+ return -1;
--- /dev/null
+From ee9081b2726a5ca8cde5497afdc5425e21ff8f8b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 15 Jul 2013 00:39:21 +0200
+Subject: [PATCH 37/53] mtd: cfi cmdset 0002 force word write
+
+---
+ drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++--
+ 1 file changed, 7 insertions(+), 2 deletions(-)
+
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -40,7 +40,7 @@
+ #include <linux/mtd/xip.h>
+
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+
+ #define MAX_RETRIES 3
+
--- /dev/null
+From e84e2430ee0e483842b4ff013ae8a6e7e2fa2734 Mon Sep 17 00:00:00 2001
+From: Weijie Gao <weijie.gao@mediatek.com>
+Date: Wed, 1 Apr 2020 02:07:58 +0800
+Subject: [PATCH 1/2] mtd: rawnand: add driver support for MT7621 nand
+ flash controller
+
+This patch adds NAND flash controller driver for MediaTek MT7621 SoC.
+
+The NAND flash controller is similar with controllers described in
+mtk_nand.c, except that the controller from MT7621 doesn't support DMA
+transmission, and some registers' offset and fields are different.
+
+Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
+---
+ drivers/mtd/nand/raw/Kconfig | 8 +
+ drivers/mtd/nand/raw/Makefile | 1 +
+ drivers/mtd/nand/raw/mt7621_nand.c | 1348 ++++++++++++++++++++++++++++++++++++
+ 3 files changed, 1357 insertions(+)
+ create mode 100644 drivers/mtd/nand/raw/mt7621_nand.c
+
+--- a/drivers/mtd/nand/raw/Kconfig
++++ b/drivers/mtd/nand/raw/Kconfig
+@@ -387,6 +387,14 @@ config MTD_NAND_QCOM
+ Enables support for NAND flash chips on SoCs containing the EBI2 NAND
+ controller. This controller is found on IPQ806x SoC.
+
++config MTD_NAND_MT7621
++ tristate "MT7621 NAND controller"
++ depends on SOC_MT7621 || COMPILE_TEST
++ depends on HAS_IOMEM
++ help
++ Enables support for NAND controller on MT7621 SoC.
++ This driver uses PIO mode for data transmission instead of DMA mode.
++
+ config MTD_NAND_MTK
+ tristate "MTK NAND controller"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+--- a/drivers/mtd/nand/raw/Makefile
++++ b/drivers/mtd/nand/raw/Makefile
+@@ -51,6 +51,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_n
+ obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
+ obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
+ obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
++obj-$(CONFIG_MTD_NAND_MT7621) += mt7621_nand.o
+ obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o
+ obj-$(CONFIG_MTD_NAND_MXIC) += mxic_nand.o
+ obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o
+--- /dev/null
++++ b/drivers/mtd/nand/raw/mt7621_nand.c
+@@ -0,0 +1,1353 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * MediaTek MT7621 NAND Flash Controller driver
++ *
++ * Copyright (C) 2020 MediaTek Inc. All Rights Reserved.
++ *
++ * Author: Weijie Gao <weijie.gao@mediatek.com>
++ */
++
++#include <linux/io.h>
++#include <linux/clk.h>
++#include <linux/init.h>
++#include <linux/errno.h>
++#include <linux/sizes.h>
++#include <linux/iopoll.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/rawnand.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <asm/addrspace.h>
++
++/* NFI core registers */
++#define NFI_CNFG 0x000
++#define CNFG_OP_MODE_S 12
++#define CNFG_OP_MODE_M GENMASK(14, 12)
++#define CNFG_OP_CUSTOM 6
++#define CNFG_AUTO_FMT_EN BIT(9)
++#define CNFG_HW_ECC_EN BIT(8)
++#define CNFG_BYTE_RW BIT(6)
++#define CNFG_READ_MODE BIT(1)
++
++#define NFI_PAGEFMT 0x004
++#define PAGEFMT_FDM_ECC_S 12
++#define PAGEFMT_FDM_ECC_M GENMASK(15, 12)
++#define PAGEFMT_FDM_S 8
++#define PAGEFMT_FDM_M GENMASK(11, 8)
++#define PAGEFMT_SPARE_S 4
++#define PAGEFMT_SPARE_M GENMASK(5, 4)
++#define PAGEFMT_PAGE_S 0
++#define PAGEFMT_PAGE_M GENMASK(1, 0)
++
++#define NFI_CON 0x008
++#define CON_NFI_SEC_S 12
++#define CON_NFI_SEC_M GENMASK(15, 12)
++#define CON_NFI_BWR BIT(9)
++#define CON_NFI_BRD BIT(8)
++#define CON_NFI_RST BIT(1)
++#define CON_FIFO_FLUSH BIT(0)
++
++#define NFI_ACCCON 0x00c
++#define ACCCON_POECS_S 28
++#define ACCCON_POECS_MAX 0x0f
++#define ACCCON_POECS_DEF 3
++#define ACCCON_PRECS_S 22
++#define ACCCON_PRECS_MAX 0x3f
++#define ACCCON_PRECS_DEF 3
++#define ACCCON_C2R_S 16
++#define ACCCON_C2R_MAX 0x3f
++#define ACCCON_C2R_DEF 7
++#define ACCCON_W2R_S 12
++#define ACCCON_W2R_MAX 0x0f
++#define ACCCON_W2R_DEF 7
++#define ACCCON_WH_S 8
++#define ACCCON_WH_MAX 0x0f
++#define ACCCON_WH_DEF 15
++#define ACCCON_WST_S 4
++#define ACCCON_WST_MAX 0x0f
++#define ACCCON_WST_DEF 15
++#define ACCCON_WST_MIN 3
++#define ACCCON_RLT_S 0
++#define ACCCON_RLT_MAX 0x0f
++#define ACCCON_RLT_DEF 15
++#define ACCCON_RLT_MIN 3
++
++#define NFI_CMD 0x020
++
++#define NFI_ADDRNOB 0x030
++#define ADDR_ROW_NOB_S 4
++#define ADDR_ROW_NOB_M GENMASK(6, 4)
++#define ADDR_COL_NOB_S 0
++#define ADDR_COL_NOB_M GENMASK(2, 0)
++
++#define NFI_COLADDR 0x034
++#define NFI_ROWADDR 0x038
++
++#define NFI_STRDATA 0x040
++#define STR_DATA BIT(0)
++
++#define NFI_CNRNB 0x044
++#define CB2R_TIME_S 4
++#define CB2R_TIME_M GENMASK(7, 4)
++#define STR_CNRNB BIT(0)
++
++#define NFI_DATAW 0x050
++#define NFI_DATAR 0x054
++
++#define NFI_PIO_DIRDY 0x058
++#define PIO_DIRDY BIT(0)
++
++#define NFI_STA 0x060
++#define STA_NFI_FSM_S 16
++#define STA_NFI_FSM_M GENMASK(19, 16)
++#define STA_FSM_CUSTOM_DATA 14
++#define STA_BUSY BIT(8)
++#define STA_ADDR BIT(1)
++#define STA_CMD BIT(0)
++
++#define NFI_ADDRCNTR 0x070
++#define SEC_CNTR_S 12
++#define SEC_CNTR_M GENMASK(15, 12)
++#define SEC_ADDR_S 0
++#define SEC_ADDR_M GENMASK(9, 0)
++
++#define NFI_CSEL 0x090
++#define CSEL_S 0
++#define CSEL_M GENMASK(1, 0)
++
++#define NFI_FDM0L 0x0a0
++#define NFI_FDML(n) (0x0a0 + ((n) << 3))
++
++#define NFI_FDM0M 0x0a4
++#define NFI_FDMM(n) (0x0a4 + ((n) << 3))
++
++#define NFI_MASTER_STA 0x210
++#define MAS_ADDR GENMASK(11, 9)
++#define MAS_RD GENMASK(8, 6)
++#define MAS_WR GENMASK(5, 3)
++#define MAS_RDDLY GENMASK(2, 0)
++
++/* ECC engine registers */
++#define ECC_ENCCON 0x000
++#define ENC_EN BIT(0)
++
++#define ECC_ENCCNFG 0x004
++#define ENC_CNFG_MSG_S 16
++#define ENC_CNFG_MSG_M GENMASK(28, 16)
++#define ENC_MODE_S 4
++#define ENC_MODE_M GENMASK(5, 4)
++#define ENC_MODE_NFI 1
++#define ENC_TNUM_S 0
++#define ENC_TNUM_M GENMASK(2, 0)
++
++#define ECC_ENCIDLE 0x00c
++#define ENC_IDLE BIT(0)
++
++#define ECC_DECCON 0x100
++#define DEC_EN BIT(0)
++
++#define ECC_DECCNFG 0x104
++#define DEC_EMPTY_EN BIT(31)
++#define DEC_CS_S 16
++#define DEC_CS_M GENMASK(28, 16)
++#define DEC_CON_S 12
++#define DEC_CON_M GENMASK(13, 12)
++#define DEC_CON_EL 2
++#define DEC_MODE_S 4
++#define DEC_MODE_M GENMASK(5, 4)
++#define DEC_MODE_NFI 1
++#define DEC_TNUM_S 0
++#define DEC_TNUM_M GENMASK(2, 0)
++
++#define ECC_DECIDLE 0x10c
++#define DEC_IDLE BIT(1)
++
++#define ECC_DECENUM 0x114
++#define ERRNUM_S 2
++#define ERRNUM_M GENMASK(3, 0)
++
++#define ECC_DECDONE 0x118
++#define DEC_DONE7 BIT(7)
++#define DEC_DONE6 BIT(6)
++#define DEC_DONE5 BIT(5)
++#define DEC_DONE4 BIT(4)
++#define DEC_DONE3 BIT(3)
++#define DEC_DONE2 BIT(2)
++#define DEC_DONE1 BIT(1)
++#define DEC_DONE0 BIT(0)
++
++#define ECC_DECEL(n) (0x11c + (n) * 4)
++#define DEC_EL_ODD_S 16
++#define DEC_EL_EVEN_S 0
++#define DEC_EL_M 0x1fff
++#define DEC_EL_BYTE_POS_S 3
++#define DEC_EL_BIT_POS_M GENMASK(3, 0)
++
++#define ECC_FDMADDR 0x13c
++
++/* ENCIDLE and DECIDLE */
++#define ECC_IDLE BIT(0)
++
++#define ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt) \
++ ((tpoecs) << ACCCON_POECS_S | (tprecs) << ACCCON_PRECS_S | \
++ (tc2r) << ACCCON_C2R_S | (tw2r) << ACCCON_W2R_S | \
++ (twh) << ACCCON_WH_S | (twst) << ACCCON_WST_S | (trlt))
++
++#define MASTER_STA_MASK (MAS_ADDR | MAS_RD | MAS_WR | \
++ MAS_RDDLY)
++#define NFI_RESET_TIMEOUT 1000000
++#define NFI_CORE_TIMEOUT 500000
++#define ECC_ENGINE_TIMEOUT 500000
++
++#define ECC_SECTOR_SIZE 512
++#define ECC_PARITY_BITS 13
++
++#define NFI_FDM_SIZE 8
++
++#define MT7621_NFC_NAME "mt7621-nand"
++
++struct mt7621_nfc {
++ struct nand_controller controller;
++ struct nand_chip nand;
++ struct clk *nfi_clk;
++ struct device *dev;
++
++ void __iomem *nfi_regs;
++ void __iomem *ecc_regs;
++
++ u32 spare_per_sector;
++};
++
++static const u16 mt7621_nfi_page_size[] = { SZ_512, SZ_2K, SZ_4K };
++static const u8 mt7621_nfi_spare_size[] = { 16, 26, 27, 28 };
++static const u8 mt7621_ecc_strength[] = { 4, 6, 8, 10, 12 };
++
++static inline u32 nfi_read32(struct mt7621_nfc *nfc, u32 reg)
++{
++ return readl(nfc->nfi_regs + reg);
++}
++
++static inline void nfi_write32(struct mt7621_nfc *nfc, u32 reg, u32 val)
++{
++ writel(val, nfc->nfi_regs + reg);
++}
++
++static inline u16 nfi_read16(struct mt7621_nfc *nfc, u32 reg)
++{
++ return readw(nfc->nfi_regs + reg);
++}
++
++static inline void nfi_write16(struct mt7621_nfc *nfc, u32 reg, u16 val)
++{
++ writew(val, nfc->nfi_regs + reg);
++}
++
++static inline void ecc_write16(struct mt7621_nfc *nfc, u32 reg, u16 val)
++{
++ writew(val, nfc->ecc_regs + reg);
++}
++
++static inline u32 ecc_read32(struct mt7621_nfc *nfc, u32 reg)
++{
++ return readl(nfc->ecc_regs + reg);
++}
++
++static inline void ecc_write32(struct mt7621_nfc *nfc, u32 reg, u32 val)
++{
++ return writel(val, nfc->ecc_regs + reg);
++}
++
++static inline u8 *oob_fdm_ptr(struct nand_chip *nand, int sect)
++{
++ return nand->oob_poi + sect * NFI_FDM_SIZE;
++}
++
++static inline u8 *oob_ecc_ptr(struct mt7621_nfc *nfc, int sect)
++{
++ struct nand_chip *nand = &nfc->nand;
++
++ return nand->oob_poi + nand->ecc.steps * NFI_FDM_SIZE +
++ sect * (nfc->spare_per_sector - NFI_FDM_SIZE);
++}
++
++static inline u8 *page_data_ptr(struct nand_chip *nand, const u8 *buf,
++ int sect)
++{
++ return (u8 *)buf + sect * nand->ecc.size;
++}
++
++static int mt7621_ecc_wait_idle(struct mt7621_nfc *nfc, u32 reg)
++{
++ struct device *dev = nfc->dev;
++ u32 val;
++ int ret;
++
++ ret = readw_poll_timeout_atomic(nfc->ecc_regs + reg, val,
++ val & ECC_IDLE, 10,
++ ECC_ENGINE_TIMEOUT);
++ if (ret) {
++ dev_warn(dev, "ECC engine timed out entering idle mode\n");
++ return -EIO;
++ }
++
++ return 0;
++}
++
++static int mt7621_ecc_decoder_wait_done(struct mt7621_nfc *nfc, u32 sect)
++{
++ struct device *dev = nfc->dev;
++ u32 val;
++ int ret;
++
++ ret = readw_poll_timeout_atomic(nfc->ecc_regs + ECC_DECDONE, val,
++ val & (1 << sect), 10,
++ ECC_ENGINE_TIMEOUT);
++
++ if (ret) {
++ dev_warn(dev, "ECC decoder for sector %d timed out\n",
++ sect);
++ return -ETIMEDOUT;
++ }
++
++ return 0;
++}
++
++static void mt7621_ecc_encoder_op(struct mt7621_nfc *nfc, bool enable)
++{
++ mt7621_ecc_wait_idle(nfc, ECC_ENCIDLE);
++ ecc_write16(nfc, ECC_ENCCON, enable ? ENC_EN : 0);
++}
++
++static void mt7621_ecc_decoder_op(struct mt7621_nfc *nfc, bool enable)
++{
++ mt7621_ecc_wait_idle(nfc, ECC_DECIDLE);
++ ecc_write16(nfc, ECC_DECCON, enable ? DEC_EN : 0);
++}
++
++static int mt7621_ecc_correct_check(struct mt7621_nfc *nfc, u8 *sector_buf,
++ u8 *fdm_buf, u32 sect)
++{
++ struct nand_chip *nand = &nfc->nand;
++ u32 decnum, num_error_bits, fdm_end_bits;
++ u32 error_locations, error_bit_loc;
++ u32 error_byte_pos, error_bit_pos;
++ int bitflips = 0;
++ u32 i;
++
++ decnum = ecc_read32(nfc, ECC_DECENUM);
++ num_error_bits = (decnum >> (sect << ERRNUM_S)) & ERRNUM_M;
++ fdm_end_bits = (nand->ecc.size + NFI_FDM_SIZE) << 3;
++
++ if (!num_error_bits)
++ return 0;
++
++ if (num_error_bits == ERRNUM_M)
++ return -1;
++
++ for (i = 0; i < num_error_bits; i++) {
++ error_locations = ecc_read32(nfc, ECC_DECEL(i / 2));
++ error_bit_loc = (error_locations >> ((i % 2) * DEC_EL_ODD_S)) &
++ DEC_EL_M;
++ error_byte_pos = error_bit_loc >> DEC_EL_BYTE_POS_S;
++ error_bit_pos = error_bit_loc & DEC_EL_BIT_POS_M;
++
++ if (error_bit_loc < (nand->ecc.size << 3)) {
++ if (sector_buf) {
++ sector_buf[error_byte_pos] ^=
++ (1 << error_bit_pos);
++ }
++ } else if (error_bit_loc < fdm_end_bits) {
++ if (fdm_buf) {
++ fdm_buf[error_byte_pos - nand->ecc.size] ^=
++ (1 << error_bit_pos);
++ }
++ }
++
++ bitflips++;
++ }
++
++ return bitflips;
++}
++
++static int mt7621_nfc_wait_write_completion(struct mt7621_nfc *nfc,
++ struct nand_chip *nand)
++{
++ struct device *dev = nfc->dev;
++ u16 val;
++ int ret;
++
++ ret = readw_poll_timeout_atomic(nfc->nfi_regs + NFI_ADDRCNTR, val,
++ ((val & SEC_CNTR_M) >> SEC_CNTR_S) >= nand->ecc.steps, 10,
++ NFI_CORE_TIMEOUT);
++
++ if (ret) {
++ dev_warn(dev, "NFI core write operation timed out\n");
++ return -ETIMEDOUT;
++ }
++
++ return ret;
++}
++
++static void mt7621_nfc_hw_reset(struct mt7621_nfc *nfc)
++{
++ u32 val;
++ int ret;
++
++ /* reset all registers and force the NFI master to terminate */
++ nfi_write16(nfc, NFI_CON, CON_FIFO_FLUSH | CON_NFI_RST);
++
++ /* wait for the master to finish the last transaction */
++ ret = readw_poll_timeout(nfc->nfi_regs + NFI_MASTER_STA, val,
++ !(val & MASTER_STA_MASK), 50,
++ NFI_RESET_TIMEOUT);
++ if (ret) {
++ dev_warn(nfc->dev, "Failed to reset NFI master in %dms\n",
++ NFI_RESET_TIMEOUT);
++ }
++
++ /* ensure any status register affected by the NFI master is reset */
++ nfi_write16(nfc, NFI_CON, CON_FIFO_FLUSH | CON_NFI_RST);
++ nfi_write16(nfc, NFI_STRDATA, 0);
++}
++
++static inline void mt7621_nfc_hw_init(struct mt7621_nfc *nfc)
++{
++ u32 acccon;
++
++ /*
++ * CNRNB: nand ready/busy register
++ * -------------------------------
++ * 7:4: timeout register for polling the NAND busy/ready signal
++ * 0 : poll the status of the busy/ready signal after [7:4]*16 cycles.
++ */
++ nfi_write16(nfc, NFI_CNRNB, CB2R_TIME_M | STR_CNRNB);
++
++ mt7621_nfc_hw_reset(nfc);
++
++ /* Apply default access timing */
++ acccon = ACCTIMING(ACCCON_POECS_DEF, ACCCON_PRECS_DEF, ACCCON_C2R_DEF,
++ ACCCON_W2R_DEF, ACCCON_WH_DEF, ACCCON_WST_DEF,
++ ACCCON_RLT_DEF);
++
++ nfi_write32(nfc, NFI_ACCCON, acccon);
++}
++
++static int mt7621_nfc_send_command(struct mt7621_nfc *nfc, u8 command)
++{
++ struct device *dev = nfc->dev;
++ u32 val;
++ int ret;
++
++ nfi_write32(nfc, NFI_CMD, command);
++
++ ret = readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val,
++ !(val & STA_CMD), 10,
++ NFI_CORE_TIMEOUT);
++ if (ret) {
++ dev_warn(dev, "NFI core timed out entering command mode\n");
++ return -EIO;
++ }
++
++ return 0;
++}
++
++static int mt7621_nfc_send_address_byte(struct mt7621_nfc *nfc, int addr)
++{
++ struct device *dev = nfc->dev;
++ u32 val;
++ int ret;
++
++ nfi_write32(nfc, NFI_COLADDR, addr);
++ nfi_write32(nfc, NFI_ROWADDR, 0);
++ nfi_write16(nfc, NFI_ADDRNOB, 1);
++
++ ret = readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val,
++ !(val & STA_ADDR), 10,
++ NFI_CORE_TIMEOUT);
++ if (ret) {
++ dev_warn(dev, "NFI core timed out entering address mode\n");
++ return -EIO;
++ }
++
++ return 0;
++}
++
++static int mt7621_nfc_send_address(struct mt7621_nfc *nfc, const u8 *addr,
++ unsigned int naddrs)
++{
++ int ret;
++
++ while (naddrs) {
++ ret = mt7621_nfc_send_address_byte(nfc, *addr);
++ if (ret)
++ return ret;
++
++ addr++;
++ naddrs--;
++ }
++
++ return 0;
++}
++
++static void mt7621_nfc_wait_pio_ready(struct mt7621_nfc *nfc)
++{
++ struct device *dev = nfc->dev;
++ int ret;
++ u16 val;
++
++ ret = readw_poll_timeout_atomic(nfc->nfi_regs + NFI_PIO_DIRDY, val,
++ val & PIO_DIRDY, 10,
++ NFI_CORE_TIMEOUT);
++ if (ret < 0)
++ dev_err(dev, "NFI core PIO mode not ready\n");
++}
++
++static u32 mt7621_nfc_pio_read(struct mt7621_nfc *nfc, bool br)
++{
++ u32 reg;
++
++ /* after each byte read, the NFI_STA reg is reset by the hardware */
++ reg = (nfi_read32(nfc, NFI_STA) & STA_NFI_FSM_M) >> STA_NFI_FSM_S;
++ if (reg != STA_FSM_CUSTOM_DATA) {
++ reg = nfi_read16(nfc, NFI_CNFG);
++ reg |= CNFG_READ_MODE | CNFG_BYTE_RW;
++ if (!br)
++ reg &= ~CNFG_BYTE_RW;
++ nfi_write16(nfc, NFI_CNFG, reg);
++
++ /*
++ * set to max sector to allow the HW to continue reading over
++ * unaligned accesses
++ */
++ nfi_write16(nfc, NFI_CON, CON_NFI_SEC_M | CON_NFI_BRD);
++
++ /* trigger to fetch data */
++ nfi_write16(nfc, NFI_STRDATA, STR_DATA);
++ }
++
++ mt7621_nfc_wait_pio_ready(nfc);
++
++ return nfi_read32(nfc, NFI_DATAR);
++}
++
++static void mt7621_nfc_read_data(struct mt7621_nfc *nfc, u8 *buf, u32 len)
++{
++ while (((uintptr_t)buf & 3) && len) {
++ *buf = mt7621_nfc_pio_read(nfc, true);
++ buf++;
++ len--;
++ }
++
++ while (len >= 4) {
++ *(u32 *)buf = mt7621_nfc_pio_read(nfc, false);
++ buf += 4;
++ len -= 4;
++ }
++
++ while (len) {
++ *buf = mt7621_nfc_pio_read(nfc, true);
++ buf++;
++ len--;
++ }
++}
++
++static void mt7621_nfc_read_data_discard(struct mt7621_nfc *nfc, u32 len)
++{
++ while (len >= 4) {
++ mt7621_nfc_pio_read(nfc, false);
++ len -= 4;
++ }
++
++ while (len) {
++ mt7621_nfc_pio_read(nfc, true);
++ len--;
++ }
++}
++
++static void mt7621_nfc_pio_write(struct mt7621_nfc *nfc, u32 val, bool bw)
++{
++ u32 reg;
++
++ reg = (nfi_read32(nfc, NFI_STA) & STA_NFI_FSM_M) >> STA_NFI_FSM_S;
++ if (reg != STA_FSM_CUSTOM_DATA) {
++ reg = nfi_read16(nfc, NFI_CNFG);
++ reg &= ~(CNFG_READ_MODE | CNFG_BYTE_RW);
++ if (bw)
++ reg |= CNFG_BYTE_RW;
++ nfi_write16(nfc, NFI_CNFG, reg);
++
++ nfi_write16(nfc, NFI_CON, CON_NFI_SEC_M | CON_NFI_BWR);
++ nfi_write16(nfc, NFI_STRDATA, STR_DATA);
++ }
++
++ mt7621_nfc_wait_pio_ready(nfc);
++ nfi_write32(nfc, NFI_DATAW, val);
++}
++
++static void mt7621_nfc_write_data(struct mt7621_nfc *nfc, const u8 *buf,
++ u32 len)
++{
++ while (((uintptr_t)buf & 3) && len) {
++ mt7621_nfc_pio_write(nfc, *buf, true);
++ buf++;
++ len--;
++ }
++
++ while (len >= 4) {
++ mt7621_nfc_pio_write(nfc, *(const u32 *)buf, false);
++ buf += 4;
++ len -= 4;
++ }
++
++ while (len) {
++ mt7621_nfc_pio_write(nfc, *buf, true);
++ buf++;
++ len--;
++ }
++}
++
++static void mt7621_nfc_write_data_empty(struct mt7621_nfc *nfc, u32 len)
++{
++ while (len >= 4) {
++ mt7621_nfc_pio_write(nfc, 0xffffffff, false);
++ len -= 4;
++ }
++
++ while (len) {
++ mt7621_nfc_pio_write(nfc, 0xff, true);
++ len--;
++ }
++}
++
++static int mt7621_nfc_dev_ready(struct mt7621_nfc *nfc,
++ unsigned int timeout_ms)
++{
++ u32 val;
++
++ return readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val,
++ !(val & STA_BUSY), 10,
++ timeout_ms * 1000);
++}
++
++static int mt7621_nfc_exec_instr(struct nand_chip *nand,
++ const struct nand_op_instr *instr)
++{
++ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
++
++ switch (instr->type) {
++ case NAND_OP_CMD_INSTR:
++ mt7621_nfc_hw_reset(nfc);
++ nfi_write16(nfc, NFI_CNFG, CNFG_OP_CUSTOM << CNFG_OP_MODE_S);
++ return mt7621_nfc_send_command(nfc, instr->ctx.cmd.opcode);
++ case NAND_OP_ADDR_INSTR:
++ return mt7621_nfc_send_address(nfc, instr->ctx.addr.addrs,
++ instr->ctx.addr.naddrs);
++ case NAND_OP_DATA_IN_INSTR:
++ mt7621_nfc_read_data(nfc, instr->ctx.data.buf.in,
++ instr->ctx.data.len);
++ return 0;
++ case NAND_OP_DATA_OUT_INSTR:
++ mt7621_nfc_write_data(nfc, instr->ctx.data.buf.out,
++ instr->ctx.data.len);
++ return 0;
++ case NAND_OP_WAITRDY_INSTR:
++ return mt7621_nfc_dev_ready(nfc,
++ instr->ctx.waitrdy.timeout_ms);
++ default:
++ WARN_ONCE(1, "unsupported NAND instruction type: %d\n",
++ instr->type);
++
++ return -EINVAL;
++ }
++}
++
++static int mt7621_nfc_exec_op(struct nand_chip *nand,
++ const struct nand_operation *op, bool check_only)
++{
++ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
++ int i, ret;
++
++ if (check_only)
++ return 0;
++
++ /* Only CS0 available */
++ nfi_write16(nfc, NFI_CSEL, 0);
++
++ for (i = 0; i < op->ninstrs; i++) {
++ ret = mt7621_nfc_exec_instr(nand, &op->instrs[i]);
++ if (ret)
++ return ret;
++ }
++
++ return 0;
++}
++
++static int mt7621_nfc_setup_interface(struct nand_chip *nand, int csline,
++ const struct nand_interface_config *conf)
++{
++ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
++ const struct nand_sdr_timings *timings;
++ u32 acccon, temp, rate, tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt;
++
++ if (!nfc->nfi_clk)
++ return -ENOTSUPP;
++
++ timings = nand_get_sdr_timings(conf);
++ if (IS_ERR(timings))
++ return -ENOTSUPP;
++
++ rate = clk_get_rate(nfc->nfi_clk);
++
++ /* turn clock rate into KHZ */
++ rate /= 1000;
++
++ tpoecs = max(timings->tALH_min, timings->tCLH_min) / 1000;
++ tpoecs = DIV_ROUND_UP(tpoecs * rate, 1000000);
++ tpoecs = min_t(u32, tpoecs, ACCCON_POECS_MAX);
++
++ tprecs = max(timings->tCLS_min, timings->tALS_min) / 1000;
++ tprecs = DIV_ROUND_UP(tprecs * rate, 1000000);
++ tprecs = min_t(u32, tprecs, ACCCON_PRECS_MAX);
++
++ /* sdr interface has no tCR which means CE# low to RE# low */
++ tc2r = 0;
++
++ tw2r = timings->tWHR_min / 1000;
++ tw2r = DIV_ROUND_UP(tw2r * rate, 1000000);
++ tw2r = DIV_ROUND_UP(tw2r - 1, 2);
++ tw2r = min_t(u32, tw2r, ACCCON_W2R_MAX);
++
++ twh = max(timings->tREH_min, timings->tWH_min) / 1000;
++ twh = DIV_ROUND_UP(twh * rate, 1000000) - 1;
++ twh = min_t(u32, twh, ACCCON_WH_MAX);
++
++ /* Calculate real WE#/RE# hold time in nanosecond */
++ temp = (twh + 1) * 1000000 / rate;
++ /* nanosecond to picosecond */
++ temp *= 1000;
++
++ /*
++ * WE# low level time should be expaned to meet WE# pulse time
++ * and WE# cycle time at the same time.
++ */
++ if (temp < timings->tWC_min)
++ twst = timings->tWC_min - temp;
++ else
++ twst = 0;
++ twst = max(timings->tWP_min, twst) / 1000;
++ twst = DIV_ROUND_UP(twst * rate, 1000000) - 1;
++ twst = min_t(u32, twst, ACCCON_WST_MAX);
++
++ /*
++ * RE# low level time should be expaned to meet RE# pulse time
++ * and RE# cycle time at the same time.
++ */
++ if (temp < timings->tRC_min)
++ trlt = timings->tRC_min - temp;
++ else
++ trlt = 0;
++ trlt = max(trlt, timings->tRP_min) / 1000;
++ trlt = DIV_ROUND_UP(trlt * rate, 1000000) - 1;
++ trlt = min_t(u32, trlt, ACCCON_RLT_MAX);
++
++ if (csline == NAND_DATA_IFACE_CHECK_ONLY) {
++ if (twst < ACCCON_WST_MIN || trlt < ACCCON_RLT_MIN)
++ return -ENOTSUPP;
++ }
++
++ acccon = ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt);
++
++ dev_info(nfc->dev, "Using programmed access timing: %08x\n", acccon);
++
++ nfi_write32(nfc, NFI_ACCCON, acccon);
++
++ return 0;
++}
++
++static int mt7621_nfc_calc_ecc_strength(struct mt7621_nfc *nfc,
++ u32 avail_ecc_bytes)
++{
++ struct nand_chip *nand = &nfc->nand;
++ struct mtd_info *mtd = nand_to_mtd(nand);
++ u32 strength;
++ int i;
++
++ strength = avail_ecc_bytes * 8 / ECC_PARITY_BITS;
++
++ /* Find the closest supported ecc strength */
++ for (i = ARRAY_SIZE(mt7621_ecc_strength) - 1; i >= 0; i--) {
++ if (mt7621_ecc_strength[i] <= strength)
++ break;
++ }
++
++ if (unlikely(i < 0)) {
++ dev_err(nfc->dev, "OOB size (%u) is not supported\n",
++ mtd->oobsize);
++ return -EINVAL;
++ }
++
++ nand->ecc.strength = mt7621_ecc_strength[i];
++ nand->ecc.bytes =
++ DIV_ROUND_UP(nand->ecc.strength * ECC_PARITY_BITS, 8);
++
++ dev_info(nfc->dev, "ECC strength adjusted to %u bits\n",
++ nand->ecc.strength);
++
++ return i;
++}
++
++static int mt7621_nfc_set_spare_per_sector(struct mt7621_nfc *nfc)
++{
++ struct nand_chip *nand = &nfc->nand;
++ struct mtd_info *mtd = nand_to_mtd(nand);
++ u32 size;
++ int i;
++
++ size = nand->ecc.bytes + NFI_FDM_SIZE;
++
++ /* Find the closest supported spare size */
++ for (i = 0; i < ARRAY_SIZE(mt7621_nfi_spare_size); i++) {
++ if (mt7621_nfi_spare_size[i] >= size)
++ break;
++ }
++
++ if (unlikely(i >= ARRAY_SIZE(mt7621_nfi_spare_size))) {
++ dev_err(nfc->dev, "OOB size (%u) is not supported\n",
++ mtd->oobsize);
++ return -EINVAL;
++ }
++
++ nfc->spare_per_sector = mt7621_nfi_spare_size[i];
++
++ return i;
++}
++
++static int mt7621_nfc_ecc_init(struct mt7621_nfc *nfc)
++{
++ struct nand_chip *nand = &nfc->nand;
++ struct mtd_info *mtd = nand_to_mtd(nand);
++ u32 spare_per_sector, encode_block_size, decode_block_size;
++ u32 ecc_enccfg, ecc_deccfg;
++ int ecc_cap;
++
++ /* Only hardware ECC mode is supported */
++ if (nand->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
++ dev_err(nfc->dev, "Only hardware ECC mode is supported\n");
++ return -EINVAL;
++ }
++
++ nand->ecc.size = ECC_SECTOR_SIZE;
++ nand->ecc.steps = mtd->writesize / nand->ecc.size;
++
++ spare_per_sector = mtd->oobsize / nand->ecc.steps;
++
++ ecc_cap = mt7621_nfc_calc_ecc_strength(nfc,
++ spare_per_sector - NFI_FDM_SIZE);
++ if (ecc_cap < 0)
++ return ecc_cap;
++
++ /* Sector + FDM */
++ encode_block_size = (nand->ecc.size + NFI_FDM_SIZE) * 8;
++ ecc_enccfg = ecc_cap | (ENC_MODE_NFI << ENC_MODE_S) |
++ (encode_block_size << ENC_CNFG_MSG_S);
++
++ /* Sector + FDM + ECC parity bits */
++ decode_block_size = ((nand->ecc.size + NFI_FDM_SIZE) * 8) +
++ nand->ecc.strength * ECC_PARITY_BITS;
++ ecc_deccfg = ecc_cap | (DEC_MODE_NFI << DEC_MODE_S) |
++ (decode_block_size << DEC_CS_S) |
++ (DEC_CON_EL << DEC_CON_S) | DEC_EMPTY_EN;
++
++ mt7621_ecc_encoder_op(nfc, false);
++ ecc_write32(nfc, ECC_ENCCNFG, ecc_enccfg);
++
++ mt7621_ecc_decoder_op(nfc, false);
++ ecc_write32(nfc, ECC_DECCNFG, ecc_deccfg);
++
++ return 0;
++}
++
++static int mt7621_nfc_set_page_format(struct mt7621_nfc *nfc)
++{
++ struct nand_chip *nand = &nfc->nand;
++ struct mtd_info *mtd = nand_to_mtd(nand);
++ int i, spare_size;
++ u32 pagefmt;
++
++ spare_size = mt7621_nfc_set_spare_per_sector(nfc);
++ if (spare_size < 0)
++ return spare_size;
++
++ for (i = 0; i < ARRAY_SIZE(mt7621_nfi_page_size); i++) {
++ if (mt7621_nfi_page_size[i] == mtd->writesize)
++ break;
++ }
++
++ if (unlikely(i >= ARRAY_SIZE(mt7621_nfi_page_size))) {
++ dev_err(nfc->dev, "Page size (%u) is not supported\n",
++ mtd->writesize);
++ return -EINVAL;
++ }
++
++ pagefmt = i | (spare_size << PAGEFMT_SPARE_S) |
++ (NFI_FDM_SIZE << PAGEFMT_FDM_S) |
++ (NFI_FDM_SIZE << PAGEFMT_FDM_ECC_S);
++
++ nfi_write16(nfc, NFI_PAGEFMT, pagefmt);
++
++ return 0;
++}
++
++static int mt7621_nfc_attach_chip(struct nand_chip *nand)
++{
++ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
++ int ret;
++
++ if (nand->options & NAND_BUSWIDTH_16) {
++ dev_err(nfc->dev, "16-bit buswidth is not supported");
++ return -EINVAL;
++ }
++
++ ret = mt7621_nfc_ecc_init(nfc);
++ if (ret)
++ return ret;
++
++ return mt7621_nfc_set_page_format(nfc);
++}
++
++static const struct nand_controller_ops mt7621_nfc_controller_ops = {
++ .attach_chip = mt7621_nfc_attach_chip,
++ .exec_op = mt7621_nfc_exec_op,
++ .setup_interface = mt7621_nfc_setup_interface,
++};
++
++static int mt7621_nfc_ooblayout_free(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oob_region)
++{
++ struct nand_chip *nand = mtd_to_nand(mtd);
++
++ if (section >= nand->ecc.steps)
++ return -ERANGE;
++
++ oob_region->length = NFI_FDM_SIZE - 1;
++ oob_region->offset = section * NFI_FDM_SIZE + 1;
++
++ return 0;
++}
++
++static int mt7621_nfc_ooblayout_ecc(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oob_region)
++{
++ struct nand_chip *nand = mtd_to_nand(mtd);
++
++ if (section)
++ return -ERANGE;
++
++ oob_region->offset = NFI_FDM_SIZE * nand->ecc.steps;
++ oob_region->length = mtd->oobsize - oob_region->offset;
++
++ return 0;
++}
++
++static const struct mtd_ooblayout_ops mt7621_nfc_ooblayout_ops = {
++ .free = mt7621_nfc_ooblayout_free,
++ .ecc = mt7621_nfc_ooblayout_ecc,
++};
++
++static void mt7621_nfc_write_fdm(struct mt7621_nfc *nfc)
++{
++ struct nand_chip *nand = &nfc->nand;
++ u32 vall, valm;
++ u8 *oobptr;
++ int i, j;
++
++ for (i = 0; i < nand->ecc.steps; i++) {
++ vall = 0;
++ valm = 0;
++ oobptr = oob_fdm_ptr(nand, i);
++
++ for (j = 0; j < 4; j++)
++ vall |= (u32)oobptr[j] << (j * 8);
++
++ for (j = 0; j < 4; j++)
++ valm |= (u32)oobptr[j + 4] << ((j - 4) * 8);
++
++ nfi_write32(nfc, NFI_FDML(i), vall);
++ nfi_write32(nfc, NFI_FDMM(i), valm);
++ }
++}
++
++static void mt7621_nfc_read_sector_fdm(struct mt7621_nfc *nfc, u32 sect)
++{
++ struct nand_chip *nand = &nfc->nand;
++ u32 vall, valm;
++ u8 *oobptr;
++ int i;
++
++ vall = nfi_read32(nfc, NFI_FDML(sect));
++ valm = nfi_read32(nfc, NFI_FDMM(sect));
++ oobptr = oob_fdm_ptr(nand, sect);
++
++ for (i = 0; i < 4; i++)
++ oobptr[i] = (vall >> (i * 8)) & 0xff;
++
++ for (i = 0; i < 4; i++)
++ oobptr[i + 4] = (valm >> (i * 8)) & 0xff;
++}
++
++static int mt7621_nfc_read_page_hwecc(struct nand_chip *nand, uint8_t *buf,
++ int oob_required, int page)
++{
++ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
++ struct mtd_info *mtd = nand_to_mtd(nand);
++ int bitflips = 0;
++ int rc, i;
++
++ nand_read_page_op(nand, page, 0, NULL, 0);
++
++ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) |
++ CNFG_READ_MODE | CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN);
++
++ mt7621_ecc_decoder_op(nfc, true);
++
++ nfi_write16(nfc, NFI_CON,
++ CON_NFI_BRD | (nand->ecc.steps << CON_NFI_SEC_S));
++
++ for (i = 0; i < nand->ecc.steps; i++) {
++ if (buf)
++ mt7621_nfc_read_data(nfc, page_data_ptr(nand, buf, i),
++ nand->ecc.size);
++ else
++ mt7621_nfc_read_data_discard(nfc, nand->ecc.size);
++
++ rc = mt7621_ecc_decoder_wait_done(nfc, i);
++
++ mt7621_nfc_read_sector_fdm(nfc, i);
++
++ if (rc < 0) {
++ bitflips = -EIO;
++ continue;
++ }
++
++ rc = mt7621_ecc_correct_check(nfc,
++ buf ? page_data_ptr(nand, buf, i) : NULL,
++ oob_fdm_ptr(nand, i), i);
++
++ if (rc < 0) {
++ dev_warn(nfc->dev,
++ "Uncorrectable ECC error at page %d.%d\n",
++ page, i);
++ bitflips = -EBADMSG;
++ mtd->ecc_stats.failed++;
++ } else if (bitflips >= 0) {
++ bitflips += rc;
++ mtd->ecc_stats.corrected += rc;
++ }
++ }
++
++ mt7621_ecc_decoder_op(nfc, false);
++
++ nfi_write16(nfc, NFI_CON, 0);
++
++ return bitflips;
++}
++
++static int mt7621_nfc_read_page_raw(struct nand_chip *nand, uint8_t *buf,
++ int oob_required, int page)
++{
++ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
++ int i;
++
++ nand_read_page_op(nand, page, 0, NULL, 0);
++
++ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) |
++ CNFG_READ_MODE);
++
++ nfi_write16(nfc, NFI_CON,
++ CON_NFI_BRD | (nand->ecc.steps << CON_NFI_SEC_S));
++
++ for (i = 0; i < nand->ecc.steps; i++) {
++ /* Read data */
++ if (buf)
++ mt7621_nfc_read_data(nfc, page_data_ptr(nand, buf, i),
++ nand->ecc.size);
++ else
++ mt7621_nfc_read_data_discard(nfc, nand->ecc.size);
++
++ /* Read FDM */
++ mt7621_nfc_read_data(nfc, oob_fdm_ptr(nand, i), NFI_FDM_SIZE);
++
++ /* Read ECC parity data */
++ mt7621_nfc_read_data(nfc, oob_ecc_ptr(nfc, i),
++ nfc->spare_per_sector - NFI_FDM_SIZE);
++ }
++
++ nfi_write16(nfc, NFI_CON, 0);
++
++ return 0;
++}
++
++static int mt7621_nfc_read_oob_hwecc(struct nand_chip *nand, int page)
++{
++ return mt7621_nfc_read_page_hwecc(nand, NULL, 1, page);
++}
++
++static int mt7621_nfc_read_oob_raw(struct nand_chip *nand, int page)
++{
++ return mt7621_nfc_read_page_raw(nand, NULL, 1, page);
++}
++
++static int mt7621_nfc_check_empty_page(struct nand_chip *nand, const u8 *buf)
++{
++ struct mtd_info *mtd = nand_to_mtd(nand);
++ uint32_t i, j;
++ u8 *oobptr;
++
++ if (buf) {
++ for (i = 0; i < mtd->writesize; i++)
++ if (buf[i] != 0xff)
++ return 0;
++ }
++
++ for (i = 0; i < nand->ecc.steps; i++) {
++ oobptr = oob_fdm_ptr(nand, i);
++ for (j = 0; j < NFI_FDM_SIZE; j++)
++ if (oobptr[j] != 0xff)
++ return 0;
++ }
++
++ return 1;
++}
++
++static int mt7621_nfc_write_page_hwecc(struct nand_chip *nand,
++ const uint8_t *buf, int oob_required,
++ int page)
++{
++ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
++ struct mtd_info *mtd = nand_to_mtd(nand);
++
++ if (mt7621_nfc_check_empty_page(nand, buf)) {
++ /*
++ * MT7621 ECC engine always generates parity code for input
++ * pages, even for empty pages. Doing so will write back ECC
++ * parity code to the oob region, which means such pages will
++ * no longer be empty pages.
++ *
++ * To avoid this, stop write operation if current page is an
++ * empty page.
++ */
++ return 0;
++ }
++
++ nand_prog_page_begin_op(nand, page, 0, NULL, 0);
++
++ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) |
++ CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN);
++
++ mt7621_ecc_encoder_op(nfc, true);
++
++ mt7621_nfc_write_fdm(nfc);
++
++ nfi_write16(nfc, NFI_CON,
++ CON_NFI_BWR | (nand->ecc.steps << CON_NFI_SEC_S));
++
++ if (buf)
++ mt7621_nfc_write_data(nfc, buf, mtd->writesize);
++ else
++ mt7621_nfc_write_data_empty(nfc, mtd->writesize);
++
++ mt7621_nfc_wait_write_completion(nfc, nand);
++
++ mt7621_ecc_encoder_op(nfc, false);
++
++ nfi_write16(nfc, NFI_CON, 0);
++
++ return nand_prog_page_end_op(nand);
++}
++
++static int mt7621_nfc_write_page_raw(struct nand_chip *nand,
++ const uint8_t *buf, int oob_required,
++ int page)
++{
++ struct mt7621_nfc *nfc = nand_get_controller_data(nand);
++ int i;
++
++ nand_prog_page_begin_op(nand, page, 0, NULL, 0);
++
++ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S));
++
++ nfi_write16(nfc, NFI_CON,
++ CON_NFI_BWR | (nand->ecc.steps << CON_NFI_SEC_S));
++
++ for (i = 0; i < nand->ecc.steps; i++) {
++ /* Write data */
++ if (buf)
++ mt7621_nfc_write_data(nfc, page_data_ptr(nand, buf, i),
++ nand->ecc.size);
++ else
++ mt7621_nfc_write_data_empty(nfc, nand->ecc.size);
++
++ /* Write FDM */
++ mt7621_nfc_write_data(nfc, oob_fdm_ptr(nand, i),
++ NFI_FDM_SIZE);
++
++ /* Write dummy ECC parity data */
++ mt7621_nfc_write_data_empty(nfc, nfc->spare_per_sector -
++ NFI_FDM_SIZE);
++ }
++
++ mt7621_nfc_wait_write_completion(nfc, nand);
++
++ nfi_write16(nfc, NFI_CON, 0);
++
++ return nand_prog_page_end_op(nand);
++}
++
++static int mt7621_nfc_write_oob_hwecc(struct nand_chip *nand, int page)
++{
++ return mt7621_nfc_write_page_hwecc(nand, NULL, 1, page);
++}
++
++static int mt7621_nfc_write_oob_raw(struct nand_chip *nand, int page)
++{
++ return mt7621_nfc_write_page_raw(nand, NULL, 1, page);
++}
++
++static int mt7621_nfc_init_chip(struct mt7621_nfc *nfc)
++{
++ struct nand_chip *nand = &nfc->nand;
++ struct mtd_info *mtd;
++ int ret;
++
++ nand->controller = &nfc->controller;
++ nand_set_controller_data(nand, (void *)nfc);
++ nand_set_flash_node(nand, nfc->dev->of_node);
++
++ nand->options |= NAND_USES_DMA | NAND_NO_SUBPAGE_WRITE;
++ if (!nfc->nfi_clk)
++ nand->options |= NAND_KEEP_TIMINGS;
++
++ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
++ nand->ecc.read_page = mt7621_nfc_read_page_hwecc;
++ nand->ecc.read_page_raw = mt7621_nfc_read_page_raw;
++ nand->ecc.write_page = mt7621_nfc_write_page_hwecc;
++ nand->ecc.write_page_raw = mt7621_nfc_write_page_raw;
++ nand->ecc.read_oob = mt7621_nfc_read_oob_hwecc;
++ nand->ecc.read_oob_raw = mt7621_nfc_read_oob_raw;
++ nand->ecc.write_oob = mt7621_nfc_write_oob_hwecc;
++ nand->ecc.write_oob_raw = mt7621_nfc_write_oob_raw;
++
++ mtd = nand_to_mtd(nand);
++ mtd->owner = THIS_MODULE;
++ mtd->dev.parent = nfc->dev;
++ mtd->name = MT7621_NFC_NAME;
++ mtd_set_ooblayout(mtd, &mt7621_nfc_ooblayout_ops);
++
++ mt7621_nfc_hw_init(nfc);
++
++ ret = nand_scan(nand, 1);
++ if (ret)
++ return ret;
++
++ ret = mtd_device_register(mtd, NULL, 0);
++ if (ret) {
++ dev_err(nfc->dev, "Failed to register MTD: %d\n", ret);
++ nand_cleanup(nand);
++ return ret;
++ }
++
++ return 0;
++}
++
++static int mt7621_nfc_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct mt7621_nfc *nfc;
++ struct resource *res;
++ int ret;
++
++ nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
++ if (!nfc)
++ return -ENOMEM;
++
++ nand_controller_init(&nfc->controller);
++ nfc->controller.ops = &mt7621_nfc_controller_ops;
++ nfc->dev = dev;
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nfi");
++ nfc->nfi_regs = devm_ioremap_resource(dev, res);
++ if (IS_ERR(nfc->nfi_regs)) {
++ ret = PTR_ERR(nfc->nfi_regs);
++ return ret;
++ }
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ecc");
++ nfc->ecc_regs = devm_ioremap_resource(dev, res);
++ if (IS_ERR(nfc->ecc_regs)) {
++ ret = PTR_ERR(nfc->ecc_regs);
++ return ret;
++ }
++
++ nfc->nfi_clk = devm_clk_get(dev, "nfi_clk");
++ if (IS_ERR(nfc->nfi_clk)) {
++ dev_warn(dev, "nfi clk not provided\n");
++ nfc->nfi_clk = NULL;
++ } else {
++ ret = clk_prepare_enable(nfc->nfi_clk);
++ if (ret) {
++ dev_err(dev, "Failed to enable nfi core clock\n");
++ return ret;
++ }
++ }
++
++ platform_set_drvdata(pdev, nfc);
++
++ ret = mt7621_nfc_init_chip(nfc);
++ if (ret) {
++ dev_err(dev, "Failed to initialize nand chip\n");
++ goto clk_disable;
++ }
++
++ return 0;
++
++clk_disable:
++ clk_disable_unprepare(nfc->nfi_clk);
++
++ return ret;
++}
++
++static int mt7621_nfc_remove(struct platform_device *pdev)
++{
++ struct mt7621_nfc *nfc = platform_get_drvdata(pdev);
++ struct nand_chip *nand = &nfc->nand;
++ struct mtd_info *mtd = nand_to_mtd(nand);
++
++ mtd_device_unregister(mtd);
++ nand_cleanup(nand);
++ clk_disable_unprepare(nfc->nfi_clk);
++
++ return 0;
++}
++
++static const struct of_device_id mt7621_nfc_id_table[] = {
++ { .compatible = "mediatek,mt7621-nfc" },
++ { },
++};
++MODULE_DEVICE_TABLE(of, match);
++
++static struct platform_driver mt7621_nfc_driver = {
++ .probe = mt7621_nfc_probe,
++ .remove = mt7621_nfc_remove,
++ .driver = {
++ .name = MT7621_NFC_NAME,
++ .owner = THIS_MODULE,
++ .of_match_table = mt7621_nfc_id_table,
++ },
++};
++module_platform_driver(mt7621_nfc_driver);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Weijie Gao <weijie.gao@mediatek.com>");
++MODULE_DESCRIPTION("MediaTek MT7621 NAND Flash Controller driver");
--- /dev/null
+From 3d5f4da8296b23eb3abf8b13122b0d06a215e79c Mon Sep 17 00:00:00 2001
+From: Weijie Gao <weijie.gao@mediatek.com>
+Date: Wed, 1 Apr 2020 02:07:59 +0800
+Subject: [PATCH 2/2] dt-bindings: add documentation for mt7621-nand driver
+
+This patch adds documentation for MediaTek MT7621 NAND flash controller
+driver.
+
+Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
+---
+ .../bindings/mtd/mediatek,mt7621-nfc.yaml | 68 ++++++++++++++++++++++
+ 1 file changed, 68 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,mt7621-nfc.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/mtd/mediatek,mt7621-nfc.yaml
+@@ -0,0 +1,68 @@
++# SPDX-License-Identifier: GPL-2.0
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/mtd/mediatek,mt7621-nfc.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: MediaTek MT7621 SoC NAND Flash Controller (NFC) DT binding
++
++maintainers:
++ - Weijie Gao <weijie.gao@mediatek.com>
++
++description: |
++ This driver uses a single node to describe both NAND Flash controller
++ interface (NFI) and ECC engine for MT7621 SoC.
++ MT7621 supports only one chip select.
++
++properties:
++ "#address-cells": false
++ "#size-cells": false
++
++ compatible:
++ enum:
++ - mediatek,mt7621-nfc
++
++ reg:
++ items:
++ - description: Register base of NFI core
++ - description: Register base of ECC engine
++
++ reg-names:
++ items:
++ - const: nfi
++ - const: ecc
++
++ clocks:
++ items:
++ - description: Source clock for NFI core, fixed 125MHz
++
++ clock-names:
++ items:
++ - const: nfi_clk
++
++required:
++ - compatible
++ - reg
++ - reg-names
++ - clocks
++ - clock-names
++
++examples:
++ - |
++ nficlock: nficlock {
++ #clock-cells = <0>;
++ compatible = "fixed-clock";
++
++ clock-frequency = <125000000>;
++ };
++
++ nand@1e003000 {
++ compatible = "mediatek,mt7621-nfc";
++
++ reg = <0x1e003000 0x800
++ 0x1e003800 0x800>;
++ reg-names = "nfi", "ecc";
++
++ clocks = <&nficlock>;
++ clock-names = "nfi_clk";
++ };
--- /dev/null
+--- a/drivers/mtd/spi-nor/gigadevice.c
++++ b/drivers/mtd/spi-nor/gigadevice.c
+@@ -53,6 +53,9 @@ static const struct flash_info gigadevic
+ SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK |
+ SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
+ .fixups = &gd25q256_fixups },
++ { "gd25q512", INFO(0xc84020, 0, 64 * 1024, 1024,
++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
++ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4B_OPCODES) },
+ };
+
+ const struct spi_nor_manufacturer spi_nor_gigadevice = {
--- /dev/null
+From bd0f89de5476ca25e73fae829ba3e1dafae1d90d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
+Date: Fri, 21 Jun 2019 10:04:05 +0200
+Subject: [PATCH] net: ethernet: mediatek: support net-labels
+
+With this patch, device name can be set within dts file in the same way as dsa
+port can.
+Add: label = "wan"; to GMAC node.
+
+Signed-off-by: René van Dorst <opensource@vdorst.com>
+---
+ drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+@@ -2901,6 +2901,7 @@ static const struct net_device_ops mtk_n
+
+ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
+ {
++ const char *name = of_get_property(np, "label", NULL);
+ const __be32 *_id = of_get_property(np, "reg", NULL);
+ phy_interface_t phy_mode;
+ struct phylink *phylink;
+@@ -2993,6 +2994,9 @@ static int mtk_add_mac(struct mtk_eth *e
+
+ eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN;
+
++ if (name)
++ strlcpy(eth->netdev[id]->name, name, IFNAMSIZ);
++
+ return 0;
+
+ free_netdev:
--- /dev/null
+From 924453aa9d2324e5611f8e2b71df746d8f0c79f1 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
+Date: Fri, 13 Nov 2020 16:11:32 +0100
+Subject: [PATCH] net: phy: at803x: add support for SFP module in
+ RGMII-to-x-base mode
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: René van Dorst <opensource@vdorst.com>
+---
+ drivers/net/phy/at803x.c | 91 ++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 91 insertions(+)
+
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -20,6 +20,8 @@
+ #include <linux/regulator/driver.h>
+ #include <linux/regulator/consumer.h>
+ #include <dt-bindings/net/qca-ar803x.h>
++#include <linux/sfp.h>
++#include <linux/phylink.h>
+
+ #define AT803X_SPECIFIC_FUNCTION_CONTROL 0x10
+ #define AT803X_SFC_ASSERT_CRS BIT(11)
+@@ -83,9 +85,18 @@
+
+ #define AT803X_MODE_CFG_MASK 0x0F
+ #define AT803X_MODE_CFG_SGMII 0x01
++#define AT803X_MODE_CFG_BX1000_RGMII_50 0x02
++#define AT803X_MODE_CFG_BX1000_RGMII_75 0x03
++#define AT803X_MODE_FIBER 0x01
++#define AT803X_MODE_COPPER 0x00
+
+ #define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/
+ #define AT803X_PSSR_MR_AN_COMPLETE 0x0200
++#define PSSR_LINK BIT(10)
++#define PSSR_SYNC_STATUS BIT(8)
++#define PSSR_DUPLEX BIT(13)
++#define PSSR_SPEED_1000 BIT(15)
++#define PSSR_SPEED_100 BIT(14)
+
+ #define AT803X_DEBUG_REG_0 0x00
+ #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15)
+@@ -505,10 +516,72 @@ static int at803x_parse_dt(struct phy_de
+ return 0;
+ }
+
++static int at803x_mode(struct phy_device *phydev)
++{
++ int mode;
++
++ mode = phy_read(phydev, AT803X_REG_CHIP_CONFIG) & AT803X_MODE_CFG_MASK;
++
++ if (mode == AT803X_MODE_CFG_BX1000_RGMII_50 ||
++ mode == AT803X_MODE_CFG_BX1000_RGMII_75)
++ return AT803X_MODE_FIBER;
++ return AT803X_MODE_COPPER;
++}
++
++static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
++{
++ __ETHTOOL_DECLARE_LINK_MODE_MASK(at803x_support) = { 0, };
++ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
++ struct phy_device *phydev = upstream;
++ phy_interface_t iface;
++
++ phylink_set(at803x_support, 1000baseX_Full);
++ /* AT803x only support 1000baseX but SGMII works fine when module runs
++ * at 1Gbit.
++ */
++ phylink_set(at803x_support, 1000baseT_Full);
++
++ sfp_parse_support(phydev->sfp_bus, id, support);
++
++ // Limit to interfaces that both sides support
++ linkmode_and(support, support, at803x_support);
++
++ if (linkmode_empty(support))
++ goto unsupported_mode;
++
++ iface = sfp_select_interface(phydev->sfp_bus, support);
++
++ if (iface != PHY_INTERFACE_MODE_SGMII &&
++ iface != PHY_INTERFACE_MODE_1000BASEX)
++ goto unsupported_mode;
++
++ dev_info(&phydev->mdio.dev, "SFP interface %s", phy_modes(iface));
++
++ return 0;
++
++unsupported_mode:
++ dev_info(&phydev->mdio.dev, "incompatible SFP module inserted;"
++ "Only SGMII at 1Gbit/1000BASEX are supported!\n");
++ return -EINVAL;
++}
++
++static const struct sfp_upstream_ops at803x_sfp_ops = {
++ .attach = phy_sfp_attach,
++ .detach = phy_sfp_detach,
++ .module_insert = at803x_sfp_insert,
++};
++
+ static int at803x_probe(struct phy_device *phydev)
+ {
+ struct device *dev = &phydev->mdio.dev;
+ struct at803x_priv *priv;
++ int ret;
++
++ if (at803x_mode(phydev) == AT803X_MODE_FIBER) {
++ ret = phy_sfp_probe(phydev, &at803x_sfp_ops);
++ if (ret < 0)
++ return ret;
++ }
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+@@ -709,6 +782,10 @@ static int at803x_read_status(struct phy
+ {
+ int ss, err, old_link = phydev->link;
+
++ /* Handle (Fiber) SGMII to RGMII mode */
++ if (at803x_mode(phydev) == AT803X_MODE_FIBER)
++ return genphy_c37_read_status(phydev);
++
+ /* Update the link, but return if there was an error */
+ err = genphy_update_link(phydev);
+ if (err)
+@@ -809,6 +886,12 @@ static int at803x_config_aneg(struct phy
+ {
+ int ret;
+
++ /* Handle (Fiber) SerDes to RGMII mode */
++ if (at803x_mode(phydev) == AT803X_MODE_FIBER) {
++ pr_warn("%s: fiber\n", __func__);
++ return genphy_c37_config_aneg(phydev);
++ }
++
+ ret = at803x_config_mdix(phydev, phydev->mdix_ctrl);
+ if (ret < 0)
+ return ret;
+@@ -1120,6 +1203,7 @@ static struct phy_driver at803x_driver[]
+ .suspend = at803x_suspend,
+ .resume = at803x_resume,
+ /* PHY_GBIT_FEATURES */
++ .config_aneg = at803x_config_aneg,
+ .read_status = at803x_read_status,
+ .aneg_done = at803x_aneg_done,
+ .ack_interrupt = &at803x_ack_interrupt,
--- /dev/null
+From ffbb1b37a3e1ce1a5c574a6bd4f5aede8bc468ac Mon Sep 17 00:00:00 2001
+From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
+Date: Sat, 27 Feb 2021 20:20:07 -0800
+Subject: [PATCH] Revert "net: phy: simplify phy_link_change arguments"
+
+This reverts commit a307593a644443db12888f45eed0dafb5869e2cc.
+
+This brings back the do_carrier flags used by the (hacky) next patch,
+still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c
+---
+ drivers/net/phy/phy.c | 12 ++++++------
+ drivers/net/phy/phy_device.c | 12 +++++++-----
+ drivers/net/phy/phylink.c | 3 ++-
+ include/linux/phy.h | 2 +-
+ 4 files changed, 16 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -58,13 +58,13 @@ static const char *phy_state_to_str(enum
+
+ static void phy_link_up(struct phy_device *phydev)
+ {
+- phydev->phy_link_change(phydev, true);
++ phydev->phy_link_change(phydev, true, true);
+ phy_led_trigger_change_speed(phydev);
+ }
+
+-static void phy_link_down(struct phy_device *phydev)
++static void phy_link_down(struct phy_device *phydev, bool do_carrier)
+ {
+- phydev->phy_link_change(phydev, false);
++ phydev->phy_link_change(phydev, false, do_carrier);
+ phy_led_trigger_change_speed(phydev);
+ }
+
+@@ -616,7 +616,7 @@ int phy_start_cable_test(struct phy_devi
+ goto out;
+
+ /* Mark the carrier down until the test is complete */
+- phy_link_down(phydev);
++ phy_link_down(phydev, true);
+
+ netif_testing_on(dev);
+ err = phydev->drv->cable_test_start(phydev);
+@@ -687,7 +687,7 @@ int phy_start_cable_test_tdr(struct phy_
+ goto out;
+
+ /* Mark the carrier down until the test is complete */
+- phy_link_down(phydev);
++ phy_link_down(phydev, true);
+
+ netif_testing_on(dev);
+ err = phydev->drv->cable_test_tdr_start(phydev, config);
+@@ -758,7 +758,7 @@ static int phy_check_link_status(struct
+ phy_link_up(phydev);
+ } else if (!phydev->link && phydev->state != PHY_NOLINK) {
+ phydev->state = PHY_NOLINK;
+- phy_link_down(phydev);
++ phy_link_down(phydev, true);
+ }
+
+ return 0;
+@@ -1162,7 +1162,7 @@ void phy_state_machine(struct work_struc
+ case PHY_HALTED:
+ if (phydev->link) {
+ phydev->link = 0;
+- phy_link_down(phydev);
++ phy_link_down(phydev, true);
+ }
+ do_suspend = true;
+ break;
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -937,14 +937,16 @@ struct phy_device *phy_find_first(struct
+ }
+ EXPORT_SYMBOL(phy_find_first);
+
+-static void phy_link_change(struct phy_device *phydev, bool up)
++static void phy_link_change(struct phy_device *phydev, bool up, bool do_carrier)
+ {
+ struct net_device *netdev = phydev->attached_dev;
+
+- if (up)
+- netif_carrier_on(netdev);
+- else
+- netif_carrier_off(netdev);
++ if (do_carrier) {
++ if (up)
++ netif_carrier_on(netdev);
++ else
++ netif_carrier_off(netdev);
++ }
+ phydev->adjust_link(netdev);
+ if (phydev->mii_ts && phydev->mii_ts->link_state)
+ phydev->mii_ts->link_state(phydev->mii_ts, phydev);
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -907,7 +907,8 @@ void phylink_destroy(struct phylink *pl)
+ }
+ EXPORT_SYMBOL_GPL(phylink_destroy);
+
+-static void phylink_phy_change(struct phy_device *phydev, bool up)
++static void phylink_phy_change(struct phy_device *phydev, bool up,
++ bool do_carrier)
+ {
+ struct phylink *pl = phydev->phylink;
+ bool tx_pause, rx_pause;
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -636,7 +636,7 @@ struct phy_device {
+ u8 mdix;
+ u8 mdix_ctrl;
+
+- void (*phy_link_change)(struct phy_device *phydev, bool up);
++ void (*phy_link_change)(struct phy_device *, bool up, bool do_carrier);
+ void (*adjust_link)(struct net_device *dev);
+
+ #if IS_ENABLED(CONFIG_MACSEC)
--- /dev/null
+From 0b6eb1e68290243d439ee330ea8d0b239a5aec69 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:38:50 +0100
+Subject: [PATCH 34/53] NET: multi phy support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/phy/phy.c | 9 ++++++---
+ include/linux/phy.h | 1 +
+ 2 files changed, 7 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -758,7 +758,10 @@ static int phy_check_link_status(struct
+ phy_link_up(phydev);
+ } else if (!phydev->link && phydev->state != PHY_NOLINK) {
+ phydev->state = PHY_NOLINK;
+- phy_link_down(phydev, true);
++ if (!phydev->no_auto_carrier_off)
++ phy_link_down(phydev, true);
++ else
++ phy_link_down(phydev, false);
+ }
+
+ return 0;
+@@ -1162,7 +1165,10 @@ void phy_state_machine(struct work_struc
+ case PHY_HALTED:
+ if (phydev->link) {
+ phydev->link = 0;
+- phy_link_down(phydev, true);
++ if (!phydev->no_auto_carrier_off)
++ phy_link_down(phydev, true);
++ else
++ phy_link_down(phydev, false);
+ }
+ do_suspend = true;
+ break;
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -556,6 +556,7 @@ struct phy_device {
+ unsigned sysfs_links:1;
+ unsigned loopback_enabled:1;
+ unsigned downshifted_rate:1;
++ unsigned no_auto_carrier_off:1;
+
+ unsigned autoneg:1;
+ /* The most recently read link state */
--- /dev/null
+From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 12 Aug 2014 20:49:27 +0200
+Subject: [PATCH 24/53] GPIO: add named gpio exports
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
+ drivers/gpio/gpiolib-sysfs.c | 10 +++++-
+ include/asm-generic/gpio.h | 6 ++++
+ include/linux/gpio/consumer.h | 8 +++++
+ 4 files changed, 91 insertions(+), 1 deletion(-)
+
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
+@@ -19,6 +19,8 @@
+ #include <linux/pinctrl/pinctrl.h>
+ #include <linux/slab.h>
+ #include <linux/gpio/machine.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
+
+ #include "gpiolib.h"
+ #include "gpiolib-of.h"
+@@ -1039,3 +1041,68 @@ void of_gpiochip_remove(struct gpio_chip
+ {
+ of_node_put(chip->of_node);
+ }
++
++static struct of_device_id gpio_export_ids[] = {
++ { .compatible = "gpio-export" },
++ { /* sentinel */ }
++};
++
++static int of_gpio_export_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct device_node *cnp;
++ u32 val;
++ int nb = 0;
++
++ for_each_child_of_node(np, cnp) {
++ const char *name = NULL;
++ int gpio;
++ bool dmc;
++ int max_gpio = 1;
++ int i;
++
++ of_property_read_string(cnp, "gpio-export,name", &name);
++
++ if (!name)
++ max_gpio = of_gpio_count(cnp);
++
++ for (i = 0; i < max_gpio; i++) {
++ unsigned flags = 0;
++ enum of_gpio_flags of_flags;
++
++ gpio = of_get_gpio_flags(cnp, i, &of_flags);
++ if (!gpio_is_valid(gpio))
++ return gpio;
++
++ if (of_flags == OF_GPIO_ACTIVE_LOW)
++ flags |= GPIOF_ACTIVE_LOW;
++
++ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
++ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
++ else
++ flags |= GPIOF_IN;
++
++ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
++ continue;
++
++ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
++ gpio_export_with_name(gpio, dmc, name);
++ nb++;
++ }
++ }
++
++ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
++
++ return 0;
++}
++
++static struct platform_driver gpio_export_driver = {
++ .driver = {
++ .name = "gpio-export",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(gpio_export_ids),
++ },
++ .probe = of_gpio_export_probe,
++};
++
++module_platform_driver(gpio_export_driver);
+--- a/drivers/gpio/gpiolib-sysfs.c
++++ b/drivers/gpio/gpiolib-sysfs.c
+@@ -564,7 +564,7 @@ static struct class gpio_class = {
+ *
+ * Returns zero on success, else an error.
+ */
+-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
+ {
+ struct gpio_chip *chip;
+ struct gpio_device *gdev;
+@@ -626,6 +626,8 @@ int gpiod_export(struct gpio_desc *desc,
+ offset = gpio_chip_hwgpio(desc);
+ if (chip->names && chip->names[offset])
+ ioname = chip->names[offset];
++ if (name)
++ ioname = name;
+
+ dev = device_create_with_groups(&gpio_class, &gdev->dev,
+ MKDEV(0, 0), data, gpio_groups,
+@@ -647,6 +649,12 @@ err_unlock:
+ gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+ return status;
+ }
++EXPORT_SYMBOL_GPL(__gpiod_export);
++
++int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++{
++ return __gpiod_export(desc, direction_may_change, NULL);
++}
+ EXPORT_SYMBOL_GPL(gpiod_export);
+
+ static int match_export(struct device *dev, const void *desc)
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -125,6 +125,12 @@ static inline int gpio_export(unsigned g
+ return gpiod_export(gpio_to_desc(gpio), direction_may_change);
+ }
+
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
++{
++ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
++}
++
+ static inline int gpio_export_link(struct device *dev, const char *name,
+ unsigned gpio)
+ {
+--- a/include/linux/gpio/consumer.h
++++ b/include/linux/gpio/consumer.h
+@@ -713,6 +713,7 @@ static inline void devm_acpi_dev_remove_
+
+ #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
+
++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
+ int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+ int gpiod_export_link(struct device *dev, const char *name,
+ struct gpio_desc *desc);
+@@ -720,6 +721,13 @@ void gpiod_unexport(struct gpio_desc *de
+
+ #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
+
++static inline int _gpiod_export(struct gpio_desc *desc,
++ bool direction_may_change,
++ const char *name)
++{
++ return -ENOSYS;
++}
++
+ static inline int gpiod_export(struct gpio_desc *desc,
+ bool direction_may_change)
+ {
--- /dev/null
+From d410e5478c622c01fcf31427533df5f433df9146 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 28 Jul 2013 19:45:30 +0200
+Subject: [PATCH 26/53] DT: Add documentation for gpio-ralink
+
+Describe gpio-ralink binding.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-mips@linux-mips.org
+Cc: devicetree@vger.kernel.org
+Cc: linux-gpio@vger.kernel.org
+---
+ .../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++
+ 1 file changed, 40 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
+@@ -0,0 +1,40 @@
++Ralink SoC GPIO controller bindings
++
++Required properties:
++- compatible:
++ - "ralink,rt2880-gpio" for Ralink controllers
++- #gpio-cells : Should be two.
++ - first cell is the pin number
++ - second cell is used to specify optional parameters (unused)
++- gpio-controller : Marks the device node as a GPIO controller
++- reg : Physical base address and length of the controller's registers
++- interrupt-parent: phandle to the INTC device node
++- interrupts : Specify the INTC interrupt number
++- ralink,num-gpios : Specify the number of GPIOs
++- ralink,register-map : The register layout depends on the GPIO bank and actual
++ SoC type. Register offsets need to be in this order.
++ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ]
++
++Optional properties:
++- ralink,gpio-base : Specify the GPIO chips base number
++
++Example:
++
++ gpio0: gpio@600 {
++ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
++
++ #gpio-cells = <2>;
++ gpio-controller;
++
++ reg = <0x600 0x34>;
++
++ interrupt-parent = <&intc>;
++ interrupts = <6>;
++
++ ralink,gpio-base = <0>;
++ ralink,num-gpios = <24>;
++ ralink,register-map = [ 00 04 08 0c
++ 20 24 28 2c
++ 30 34 ];
++
++ };
--- /dev/null
+From 69fdd2c4f937796b934e89c33acde9d082e27bfd Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 4 Aug 2014 20:36:29 +0200
+Subject: [PATCH 27/53] GPIO: MIPS: ralink: add gpio driver for ralink SoC
+
+Add gpio driver for Ralink SoC. This driver makes the gpio core on
+RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-mips@linux-mips.org
+Cc: linux-gpio@vger.kernel.org
+---
+ arch/mips/include/asm/mach-ralink/gpio.h | 24 ++
+ drivers/gpio/Kconfig | 6 +
+ drivers/gpio/Makefile | 1 +
+ drivers/gpio/gpio-ralink.c | 355 ++++++++++++++++++++++++++++++
+ 4 files changed, 386 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
+ create mode 100644 drivers/gpio/gpio-ralink.c
+
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/gpio.h
+@@ -0,0 +1,24 @@
++/*
++ * Ralink SoC GPIO API support
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_MACH_RALINK_GPIO_H
++#define __ASM_MACH_RALINK_GPIO_H
++
++#define ARCH_NR_GPIOS 128
++#include <asm-generic/gpio.h>
++
++#define gpio_get_value __gpio_get_value
++#define gpio_set_value __gpio_set_value
++#define gpio_cansleep __gpio_cansleep
++#define gpio_to_irq __gpio_to_irq
++
++#endif /* __ASM_MACH_RALINK_GPIO_H */
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -535,6 +535,12 @@ config GPIO_SNPS_CREG
+ where only several fields in register belong to GPIO lines and
+ each GPIO line owns a field with different length and on/off value.
+
++config GPIO_RALINK
++ bool "Ralink GPIO Support"
++ depends on RALINK
++ help
++ Say yes here to support the Ralink SoC GPIO device
++
+ config GPIO_SPEAR_SPICS
+ bool "ST SPEAr13xx SPI Chip Select as GPIO support"
+ depends on PLAT_SPEAR
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -119,6 +119,7 @@ obj-$(CONFIG_GPIO_PISOSR) += gpio-pisos
+ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
+ obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
+ obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
++obj-$(CONFIG_GPIO_RALINK) += gpio-ralink.o
+ obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o
+ obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
+ obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
+--- /dev/null
++++ b/drivers/gpio/gpio-ralink.c
+@@ -0,0 +1,341 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/spinlock.h>
++#include <linux/platform_device.h>
++#include <linux/of_irq.h>
++#include <linux/irqdomain.h>
++#include <linux/interrupt.h>
++
++enum ralink_gpio_reg {
++ GPIO_REG_INT = 0,
++ GPIO_REG_EDGE,
++ GPIO_REG_RENA,
++ GPIO_REG_FENA,
++ GPIO_REG_DATA,
++ GPIO_REG_DIR,
++ GPIO_REG_POL,
++ GPIO_REG_SET,
++ GPIO_REG_RESET,
++ GPIO_REG_TOGGLE,
++ GPIO_REG_MAX
++};
++
++struct ralink_gpio_chip {
++ struct gpio_chip chip;
++ u8 regs[GPIO_REG_MAX];
++
++ spinlock_t lock;
++ void __iomem *membase;
++ struct irq_domain *domain;
++ int irq;
++
++ u32 rising;
++ u32 falling;
++};
++
++#define MAP_MAX 4
++static struct irq_domain *irq_map[MAP_MAX];
++static int irq_map_count;
++static atomic_t irq_refcount = ATOMIC_INIT(0);
++
++static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip)
++{
++ struct ralink_gpio_chip *rg;
++
++ rg = container_of(chip, struct ralink_gpio_chip, chip);
++
++ return rg;
++}
++
++static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val)
++{
++ iowrite32(val, rg->membase + rg->regs[reg]);
++}
++
++static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg)
++{
++ return ioread32(rg->membase + rg->regs[reg]);
++}
++
++static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++ rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset));
++}
++
++static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++ return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
++}
++
++static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++ unsigned long flags;
++ u32 t;
++
++ spin_lock_irqsave(&rg->lock, flags);
++ t = rt_gpio_r32(rg, GPIO_REG_DIR);
++ t &= ~BIT(offset);
++ rt_gpio_w32(rg, GPIO_REG_DIR, t);
++ spin_unlock_irqrestore(&rg->lock, flags);
++
++ return 0;
++}
++
++static int ralink_gpio_direction_output(struct gpio_chip *chip,
++ unsigned offset, int value)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++ unsigned long flags;
++ u32 t;
++
++ spin_lock_irqsave(&rg->lock, flags);
++ ralink_gpio_set(chip, offset, value);
++ t = rt_gpio_r32(rg, GPIO_REG_DIR);
++ t |= BIT(offset);
++ rt_gpio_w32(rg, GPIO_REG_DIR, t);
++ spin_unlock_irqrestore(&rg->lock, flags);
++
++ return 0;
++}
++
++static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
++{
++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
++
++ if (rg->irq < 1)
++ return -1;
++
++ return irq_create_mapping(rg->domain, pin);
++}
++
++static void ralink_gpio_irq_handler(struct irq_desc *desc)
++{
++ int i;
++
++ for (i = 0; i < irq_map_count; i++) {
++ struct irq_domain *domain = irq_map[i];
++ struct ralink_gpio_chip *rg;
++ unsigned long pending;
++ int bit;
++
++ rg = (struct ralink_gpio_chip *) domain->host_data;
++ pending = rt_gpio_r32(rg, GPIO_REG_INT);
++
++ for_each_set_bit(bit, &pending, rg->chip.ngpio) {
++ u32 map = irq_find_mapping(domain, bit);
++ generic_handle_irq(map);
++ rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit));
++ }
++ }
++}
++
++static void ralink_gpio_irq_unmask(struct irq_data *d)
++{
++ struct ralink_gpio_chip *rg;
++ unsigned long flags;
++ u32 rise, fall;
++
++ rg = (struct ralink_gpio_chip *) d->domain->host_data;
++ rise = rt_gpio_r32(rg, GPIO_REG_RENA);
++ fall = rt_gpio_r32(rg, GPIO_REG_FENA);
++
++ spin_lock_irqsave(&rg->lock, flags);
++ rt_gpio_w32(rg, GPIO_REG_RENA, rise | (BIT(d->hwirq) & rg->rising));
++ rt_gpio_w32(rg, GPIO_REG_FENA, fall | (BIT(d->hwirq) & rg->falling));
++ spin_unlock_irqrestore(&rg->lock, flags);
++}
++
++static void ralink_gpio_irq_mask(struct irq_data *d)
++{
++ struct ralink_gpio_chip *rg;
++ unsigned long flags;
++ u32 rise, fall;
++
++ rg = (struct ralink_gpio_chip *) d->domain->host_data;
++ rise = rt_gpio_r32(rg, GPIO_REG_RENA);
++ fall = rt_gpio_r32(rg, GPIO_REG_FENA);
++
++ spin_lock_irqsave(&rg->lock, flags);
++ rt_gpio_w32(rg, GPIO_REG_FENA, fall & ~BIT(d->hwirq));
++ rt_gpio_w32(rg, GPIO_REG_RENA, rise & ~BIT(d->hwirq));
++ spin_unlock_irqrestore(&rg->lock, flags);
++}
++
++static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type)
++{
++ struct ralink_gpio_chip *rg;
++ u32 mask = BIT(d->hwirq);
++
++ rg = (struct ralink_gpio_chip *) d->domain->host_data;
++
++ if (type == IRQ_TYPE_PROBE) {
++ if ((rg->rising | rg->falling) & mask)
++ return 0;
++
++ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
++ }
++
++ if (type & IRQ_TYPE_EDGE_RISING)
++ rg->rising |= mask;
++ else
++ rg->rising &= ~mask;
++
++ if (type & IRQ_TYPE_EDGE_FALLING)
++ rg->falling |= mask;
++ else
++ rg->falling &= ~mask;
++
++ return 0;
++}
++
++static struct irq_chip ralink_gpio_irq_chip = {
++ .name = "GPIO",
++ .irq_unmask = ralink_gpio_irq_unmask,
++ .irq_mask = ralink_gpio_irq_mask,
++ .irq_mask_ack = ralink_gpio_irq_mask,
++ .irq_set_type = ralink_gpio_irq_type,
++};
++
++static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
++{
++ irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq);
++ irq_set_handler_data(irq, d);
++
++ return 0;
++}
++
++static const struct irq_domain_ops irq_domain_ops = {
++ .xlate = irq_domain_xlate_onecell,
++ .map = gpio_map,
++};
++
++static void ralink_gpio_irq_init(struct device_node *np,
++ struct ralink_gpio_chip *rg)
++{
++ if (irq_map_count >= MAP_MAX)
++ return;
++
++ rg->irq = irq_of_parse_and_map(np, 0);
++ if (!rg->irq)
++ return;
++
++ rg->domain = irq_domain_add_linear(np, rg->chip.ngpio,
++ &irq_domain_ops, rg);
++ if (!rg->domain) {
++ dev_err(rg->chip.parent, "irq_domain_add_linear failed\n");
++ return;
++ }
++
++ irq_map[irq_map_count++] = rg->domain;
++
++ rt_gpio_w32(rg, GPIO_REG_RENA, 0x0);
++ rt_gpio_w32(rg, GPIO_REG_FENA, 0x0);
++
++ if (!atomic_read(&irq_refcount))
++ irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler);
++ atomic_inc(&irq_refcount);
++
++ dev_info(rg->chip.parent, "registering %d irq handlers\n", rg->chip.ngpio);
++}
++
++static int ralink_gpio_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ struct ralink_gpio_chip *rg;
++ const __be32 *ngpio, *gpiobase;
++
++ if (!res) {
++ dev_err(&pdev->dev, "failed to find resource\n");
++ return -ENOMEM;
++ }
++
++ rg = devm_kzalloc(&pdev->dev,
++ sizeof(struct ralink_gpio_chip), GFP_KERNEL);
++ if (!rg)
++ return -ENOMEM;
++
++ rg->membase = devm_ioremap_resource(&pdev->dev, res);
++ if (!rg->membase) {
++ dev_err(&pdev->dev, "cannot remap I/O memory region\n");
++ return -ENOMEM;
++ }
++
++ if (of_property_read_u8_array(np, "ralink,register-map",
++ rg->regs, GPIO_REG_MAX)) {
++ dev_err(&pdev->dev, "failed to read register definition\n");
++ return -EINVAL;
++ }
++
++ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
++ if (!ngpio) {
++ dev_err(&pdev->dev, "failed to read number of pins\n");
++ return -EINVAL;
++ }
++
++ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
++ if (gpiobase)
++ rg->chip.base = be32_to_cpu(*gpiobase);
++ else
++ rg->chip.base = -1;
++
++ spin_lock_init(&rg->lock);
++
++ rg->chip.parent = &pdev->dev;
++ rg->chip.label = dev_name(&pdev->dev);
++ rg->chip.of_node = np;
++ rg->chip.ngpio = be32_to_cpu(*ngpio);
++ rg->chip.direction_input = ralink_gpio_direction_input;
++ rg->chip.direction_output = ralink_gpio_direction_output;
++ rg->chip.get = ralink_gpio_get;
++ rg->chip.set = ralink_gpio_set;
++ rg->chip.request = gpiochip_generic_request;
++ rg->chip.to_irq = ralink_gpio_to_irq;
++ rg->chip.free = gpiochip_generic_free;
++
++ /* set polarity to low for all lines */
++ rt_gpio_w32(rg, GPIO_REG_POL, 0);
++
++ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
++
++ ralink_gpio_irq_init(np, rg);
++
++ return gpiochip_add(&rg->chip);
++}
++
++static const struct of_device_id ralink_gpio_match[] = {
++ { .compatible = "ralink,rt2880-gpio" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ralink_gpio_match);
++
++static struct platform_driver ralink_gpio_driver = {
++ .probe = ralink_gpio_probe,
++ .driver = {
++ .name = "rt2880_gpio",
++ .owner = THIS_MODULE,
++ .of_match_table = ralink_gpio_match,
++ },
++};
++
++static int __init ralink_gpio_init(void)
++{
++ return platform_driver_register(&ralink_gpio_driver);
++}
++
++subsys_initcall(ralink_gpio_init);
--- /dev/null
+From 57fa7f2f4ef6f78ce1d30509c0d111aa3791b524 Mon Sep 17 00:00:00 2001
+From: Daniel Santos <daniel.santos@pobox.com>
+Date: Sun, 4 Nov 2018 20:24:32 -0600
+Subject: gpio-ralink: Add support for GPIO as interrupt-controller
+
+Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
+---
+ Documentation/devicetree/bindings/gpio/gpio-ralink.txt | 6 ++++++
+ drivers/gpio/gpio-ralink.c | 2 +-
+ 2 files changed, 7 insertions(+), 1 deletion(-)
+
+--- a/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
++++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
+@@ -17,6 +17,9 @@ Required properties:
+
+ Optional properties:
+ - ralink,gpio-base : Specify the GPIO chips base number
++- interrupt-controller : marks this as an interrupt controller
++- #interrupt-cells : a standard two-cell interrupt flag, see
++ interrupt-controller/interrupts.txt
+
+ Example:
+
+@@ -28,6 +31,9 @@ Example:
+
+ reg = <0x600 0x34>;
+
++ interrupt-controller;
++ #interrupt-cells = <2>;
++
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+--- a/drivers/gpio/gpio-ralink.c
++++ b/drivers/gpio/gpio-ralink.c
+@@ -220,7 +220,7 @@ static int gpio_map(struct irq_domain *d
+ }
+
+ static const struct irq_domain_ops irq_domain_ops = {
+- .xlate = irq_domain_xlate_onecell,
++ .xlate = irq_domain_xlate_twocell,
+ .map = gpio_map,
+ };
+
--- /dev/null
+From 975e76214cd2516eb6cfff4c3eec581872645e88 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 19 Sep 2013 01:50:59 +0200
+Subject: [PATCH 31/53] uvc: add iPassion iP2970 support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/media/usb/uvc/uvc_driver.c | 12 +++
+ drivers/media/usb/uvc/uvc_status.c | 2 +
+ drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++
+ drivers/media/usb/uvc/uvcvideo.h | 5 +-
+ 4 files changed, 165 insertions(+), 1 deletion(-)
+
+--- a/drivers/media/usb/uvc/uvc_driver.c
++++ b/drivers/media/usb/uvc/uvc_driver.c
+@@ -2969,6 +2969,18 @@ static const struct usb_device_id uvc_id
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_INFO_META(V4L2_META_FMT_D4XX) },
++ /* iPassion iP2970 */
++ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
++ | USB_DEVICE_ID_MATCH_INT_INFO,
++ .idVendor = 0x1B3B,
++ .idProduct = 0x2970,
++ .bInterfaceClass = USB_CLASS_VIDEO,
++ .bInterfaceSubClass = 1,
++ .bInterfaceProtocol = 0,
++ .driver_info = UVC_QUIRK_PROBE_MINMAX
++ | UVC_QUIRK_STREAM_NO_FID
++ | UVC_QUIRK_MOTION
++ | UVC_QUIRK_SINGLE_ISO },
+ /* Generic USB Video Class */
+ { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_UNDEFINED) },
+ { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_15) },
+--- a/drivers/media/usb/uvc/uvc_status.c
++++ b/drivers/media/usb/uvc/uvc_status.c
+@@ -223,6 +223,7 @@ static void uvc_status_complete(struct u
+ if (uvc_event_control(urb, status, len))
+ /* The URB will be resubmitted in work context. */
+ return;
++ dev->motion = 1;
+ break;
+ }
+
+@@ -271,6 +272,7 @@ int uvc_status_init(struct uvc_device *d
+ }
+
+ pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
++ dev->motion = 0;
+
+ /* For high-speed interrupt endpoints, the bInterval value is used as
+ * an exponent of two. Some developers forgot about it.
+--- a/drivers/media/usb/uvc/uvc_video.c
++++ b/drivers/media/usb/uvc/uvc_video.c
+@@ -16,6 +16,11 @@
+ #include <linux/wait.h>
+ #include <linux/atomic.h>
+ #include <asm/unaligned.h>
++#include <linux/skbuff.h>
++#include <linux/kobject.h>
++#include <linux/netlink.h>
++#include <linux/kobject.h>
++#include <linux/workqueue.h>
+
+ #include <media/v4l2-common.h>
+
+@@ -1156,9 +1161,149 @@ static void uvc_video_decode_data(struct
+ uvc_urb->async_operations++;
+ }
+
++struct bh_priv {
++ unsigned long seen;
++};
++
++struct bh_event {
++ const char *name;
++ struct sk_buff *skb;
++ struct work_struct work;
++};
++
++#define BH_ERR(fmt, args...) printk(KERN_ERR "%s: " fmt, "webcam", ##args )
++#define BH_DBG(fmt, args...) do {} while (0)
++#define BH_SKB_SIZE 2048
++
++extern u64 uevent_next_seqnum(void);
++static int seen = 0;
++
++static int bh_event_add_var(struct bh_event *event, int argv,
++ const char *format, ...)
++{
++ static char buf[128];
++ char *s;
++ va_list args;
++ int len;
++
++ if (argv)
++ return 0;
++
++ va_start(args, format);
++ len = vsnprintf(buf, sizeof(buf), format, args);
++ va_end(args);
++
++ if (len >= sizeof(buf)) {
++ BH_ERR("buffer size too small\n");
++ WARN_ON(1);
++ return -ENOMEM;
++ }
++
++ s = skb_put(event->skb, len + 1);
++ strcpy(s, buf);
++
++ BH_DBG("added variable '%s'\n", s);
++
++ return 0;
++}
++
++static int motion_hotplug_fill_event(struct bh_event *event)
++{
++ int s = jiffies;
++ int ret;
++
++ if (!seen)
++ seen = jiffies;
++
++ ret = bh_event_add_var(event, 0, "HOME=%s", "/");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "PATH=%s",
++ "/sbin:/bin:/usr/sbin:/usr/bin");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "SUBSYSTEM=usb");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "ACTION=motion");
++ if (ret)
++ return ret;
++
++ ret = bh_event_add_var(event, 0, "SEEN=%d", s - seen);
++ if (ret)
++ return ret;
++ seen = s;
++
++ ret = bh_event_add_var(event, 0, "SEQNUM=%llu", uevent_next_seqnum());
++
++ return ret;
++}
++
++static void motion_hotplug_work(struct work_struct *work)
++{
++ struct bh_event *event = container_of(work, struct bh_event, work);
++ int ret = 0;
++
++ event->skb = alloc_skb(BH_SKB_SIZE, GFP_KERNEL);
++ if (!event->skb)
++ goto out_free_event;
++
++ ret = bh_event_add_var(event, 0, "%s@", "add");
++ if (ret)
++ goto out_free_skb;
++
++ ret = motion_hotplug_fill_event(event);
++ if (ret)
++ goto out_free_skb;
++
++ NETLINK_CB(event->skb).dst_group = 1;
++ broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
++
++out_free_skb:
++ if (ret) {
++ BH_ERR("work error %d\n", ret);
++ kfree_skb(event->skb);
++ }
++out_free_event:
++ kfree(event);
++}
++
++static int motion_hotplug_create_event(void)
++{
++ struct bh_event *event;
++
++ event = kzalloc(sizeof(*event), GFP_KERNEL);
++ if (!event)
++ return -ENOMEM;
++
++ event->name = "motion";
++
++ INIT_WORK(&event->work, (void *)(void *)motion_hotplug_work);
++ schedule_work(&event->work);
++
++ return 0;
++}
++
++#define MOTION_FLAG_OFFSET 4
+ static void uvc_video_decode_end(struct uvc_streaming *stream,
+ struct uvc_buffer *buf, const u8 *data, int len)
+ {
++ if ((stream->dev->quirks & UVC_QUIRK_MOTION) &&
++ (data[len - 2] == 0xff) && (data[len - 1] == 0xd9)) {
++ u8 *mem;
++ buf->state = UVC_BUF_STATE_READY;
++ mem = (u8 *) (buf->mem + MOTION_FLAG_OFFSET);
++ if ( stream->dev->motion ) {
++ stream->dev->motion = 0;
++ motion_hotplug_create_event();
++ } else {
++ *mem &= 0x7f;
++ }
++ }
++
+ /* Mark the buffer as done if the EOF marker is set. */
+ if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
+ uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
+@@ -1715,6 +1860,8 @@ static int uvc_init_video_isoc(struct uv
+ if (npackets == 0)
+ return -ENOMEM;
+
++ if (stream->dev->quirks & UVC_QUIRK_SINGLE_ISO)
++ npackets = 1;
+ size = npackets * psize;
+
+ for_each_uvc_urb(uvc_urb, stream) {
+--- a/drivers/media/usb/uvc/uvcvideo.h
++++ b/drivers/media/usb/uvc/uvcvideo.h
+@@ -203,7 +203,9 @@
+ #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400
+ #define UVC_QUIRK_FORCE_Y8 0x00000800
+ #define UVC_QUIRK_FORCE_BPP 0x00001000
+-
++#define UVC_QUIRK_MOTION 0x00001000
++#define UVC_QUIRK_SINGLE_ISO 0x00002000
++
+ /* Format flags */
+ #define UVC_FMT_FLAG_COMPRESSED 0x00000001
+ #define UVC_FMT_FLAG_STREAM 0x00000002
+@@ -672,6 +674,7 @@ struct uvc_device {
+ u8 *status;
+ struct input_dev *input;
+ char input_phys[64];
++ int motion;
+
+ struct uvc_ctrl_work {
+ struct work_struct work;
--- /dev/null
+From da6015e7f19d749f135f7ac55c4ec47b06faa868 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 9 Aug 2013 20:12:59 +0200
+Subject: [PATCH 41/53] DT: Add documentation for spi-rt2880
+
+Describe the SPI master found on the MIPS based Ralink RT2880 SoC.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../devicetree/bindings/spi/spi-rt2880.txt | 28 ++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
+@@ -0,0 +1,28 @@
++Ralink SoC RT2880 SPI master controller.
++
++This SPI controller is found on most wireless SoCs made by ralink.
++
++Required properties:
++- compatible : "ralink,rt2880-spi"
++- reg : The register base for the controller.
++- #address-cells : <1>, as required by generic SPI binding.
++- #size-cells : <0>, also as required by generic SPI binding.
++
++Child nodes as per the generic SPI binding.
++
++Example:
++
++ spi@b00 {
++ compatible = "ralink,rt2880-spi";
++ reg = <0xb00 0x100>;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ m25p80@0 {
++ compatible = "m25p80";
++ reg = <0>;
++ spi-max-frequency = <10000000>;
++ };
++ };
++
--- /dev/null
+From 683af4ebb91a1600df1946ac4769d916b8a1be65 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 11:15:12 +0100
+Subject: [PATCH 42/53] SPI: ralink: add Ralink SoC spi driver
+
+Add the driver needed to make SPI work on Ralink SoC.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Acked-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/spi/Kconfig | 6 +
+ drivers/spi/Makefile | 1 +
+ drivers/spi/spi-rt2880.c | 530 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 537 insertions(+)
+ create mode 100644 drivers/spi/spi-rt2880.c
+
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -689,6 +689,12 @@ config SPI_QCOM_GENI
+ This driver can also be built as a module. If so, the module
+ will be called spi-geni-qcom.
+
++config SPI_RT2880
++ tristate "Ralink RT288x SPI Controller"
++ depends on RALINK
++ help
++ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
++
+ config SPI_S3C24XX
+ tristate "Samsung S3C24XX series SPI"
+ depends on ARCH_S3C24XX
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -96,6 +96,7 @@ obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockc
+ obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+ obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
+ obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
++obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y := spi-s3c24xx.o
+ obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
+--- /dev/null
++++ b/drivers/spi/spi-rt2880.c
+@@ -0,0 +1,530 @@
++/*
++ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
++ *
++ * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
++ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Some parts are based on spi-orion.c:
++ * Author: Shadi Ammouri <shadi@marvell.com>
++ * Copyright (C) 2007-2008 Marvell Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/reset.h>
++#include <linux/spi/spi.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
++#define DRIVER_NAME "spi-rt2880"
++
++#define RAMIPS_SPI_STAT 0x00
++#define RAMIPS_SPI_CFG 0x10
++#define RAMIPS_SPI_CTL 0x14
++#define RAMIPS_SPI_DATA 0x20
++#define RAMIPS_SPI_ADDR 0x24
++#define RAMIPS_SPI_BS 0x28
++#define RAMIPS_SPI_USER 0x2C
++#define RAMIPS_SPI_TXFIFO 0x30
++#define RAMIPS_SPI_RXFIFO 0x34
++#define RAMIPS_SPI_FIFO_STAT 0x38
++#define RAMIPS_SPI_MODE 0x3C
++#define RAMIPS_SPI_DEV_OFFSET 0x40
++#define RAMIPS_SPI_DMA 0x80
++#define RAMIPS_SPI_DMASTAT 0x84
++#define RAMIPS_SPI_ARBITER 0xF0
++
++/* SPISTAT register bit field */
++#define SPISTAT_BUSY BIT(0)
++
++/* SPICFG register bit field */
++#define SPICFG_ADDRMODE BIT(12)
++#define SPICFG_RXENVDIS BIT(11)
++#define SPICFG_RXCAP BIT(10)
++#define SPICFG_SPIENMODE BIT(9)
++#define SPICFG_MSBFIRST BIT(8)
++#define SPICFG_SPICLKPOL BIT(6)
++#define SPICFG_RXCLKEDGE_FALLING BIT(5)
++#define SPICFG_TXCLKEDGE_FALLING BIT(4)
++#define SPICFG_HIZSPI BIT(3)
++#define SPICFG_SPICLK_PRESCALE_MASK 0x7
++#define SPICFG_SPICLK_DIV2 0
++#define SPICFG_SPICLK_DIV4 1
++#define SPICFG_SPICLK_DIV8 2
++#define SPICFG_SPICLK_DIV16 3
++#define SPICFG_SPICLK_DIV32 4
++#define SPICFG_SPICLK_DIV64 5
++#define SPICFG_SPICLK_DIV128 6
++#define SPICFG_SPICLK_DISABLE 7
++
++/* SPICTL register bit field */
++#define SPICTL_START BIT(4)
++#define SPICTL_HIZSDO BIT(3)
++#define SPICTL_STARTWR BIT(2)
++#define SPICTL_STARTRD BIT(1)
++#define SPICTL_SPIENA BIT(0)
++
++/* SPIUSER register bit field */
++#define SPIUSER_USERMODE BIT(21)
++#define SPIUSER_INSTR_PHASE BIT(20)
++#define SPIUSER_ADDR_PHASE_MASK 0x7
++#define SPIUSER_ADDR_PHASE_OFFSET 17
++#define SPIUSER_MODE_PHASE BIT(16)
++#define SPIUSER_DUMMY_PHASE_MASK 0x3
++#define SPIUSER_DUMMY_PHASE_OFFSET 14
++#define SPIUSER_DATA_PHASE_MASK 0x3
++#define SPIUSER_DATA_PHASE_OFFSET 12
++#define SPIUSER_DATA_READ (BIT(0) << SPIUSER_DATA_PHASE_OFFSET)
++#define SPIUSER_DATA_WRITE (BIT(1) << SPIUSER_DATA_PHASE_OFFSET)
++#define SPIUSER_ADDR_TYPE_OFFSET 9
++#define SPIUSER_MODE_TYPE_OFFSET 6
++#define SPIUSER_DUMMY_TYPE_OFFSET 3
++#define SPIUSER_DATA_TYPE_OFFSET 0
++#define SPIUSER_TRANSFER_MASK 0x7
++#define SPIUSER_TRANSFER_SINGLE BIT(0)
++#define SPIUSER_TRANSFER_DUAL BIT(1)
++#define SPIUSER_TRANSFER_QUAD BIT(2)
++
++#define SPIUSER_TRANSFER_TYPE(type) ( \
++ (type << SPIUSER_ADDR_TYPE_OFFSET) | \
++ (type << SPIUSER_MODE_TYPE_OFFSET) | \
++ (type << SPIUSER_DUMMY_TYPE_OFFSET) | \
++ (type << SPIUSER_DATA_TYPE_OFFSET) \
++)
++
++/* SPIFIFOSTAT register bit field */
++#define SPIFIFOSTAT_TXEMPTY BIT(19)
++#define SPIFIFOSTAT_RXEMPTY BIT(18)
++#define SPIFIFOSTAT_TXFULL BIT(17)
++#define SPIFIFOSTAT_RXFULL BIT(16)
++#define SPIFIFOSTAT_FIFO_MASK 0xff
++#define SPIFIFOSTAT_TX_OFFSET 8
++#define SPIFIFOSTAT_RX_OFFSET 0
++
++#define SPI_FIFO_DEPTH 16
++
++/* SPIMODE register bit field */
++#define SPIMODE_MODE_OFFSET 24
++#define SPIMODE_DUMMY_OFFSET 0
++
++/* SPIARB register bit field */
++#define SPICTL_ARB_EN BIT(31)
++#define SPICTL_CSCTL1 BIT(16)
++#define SPI1_POR BIT(1)
++#define SPI0_POR BIT(0)
++
++#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | \
++ SPI_CS_HIGH)
++
++static atomic_t hw_reset_count = ATOMIC_INIT(0);
++
++struct rt2880_spi {
++ struct spi_master *master;
++ void __iomem *base;
++ u32 speed;
++ u16 wait_loops;
++ u16 mode;
++ struct clk *clk;
++};
++
++static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
++{
++ return spi_master_get_devdata(spi->master);
++}
++
++static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg)
++{
++ return ioread32(rs->base + reg);
++}
++
++static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg,
++ const u32 val)
++{
++ iowrite32(val, rs->base + reg);
++}
++
++static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask)
++{
++ void __iomem *addr = rs->base + reg;
++
++ iowrite32((ioread32(addr) | mask), addr);
++}
++
++static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask)
++{
++ void __iomem *addr = rs->base + reg;
++
++ iowrite32((ioread32(addr) & ~mask), addr);
++}
++
++static u32 rt2880_spi_baudrate_get(struct spi_device *spi, unsigned int speed)
++{
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++ u32 rate;
++ u32 prescale;
++
++ /*
++ * the supported rates are: 2, 4, 8, ... 128
++ * round up as we look for equal or less speed
++ */
++ rate = DIV_ROUND_UP(clk_get_rate(rs->clk), speed);
++ rate = roundup_pow_of_two(rate);
++
++ /* Convert the rate to SPI clock divisor value. */
++ prescale = ilog2(rate / 2);
++
++ /* some tolerance. double and add 100 */
++ rs->wait_loops = (8 * HZ * loops_per_jiffy) /
++ (clk_get_rate(rs->clk) / rate);
++ rs->wait_loops = (rs->wait_loops << 1) + 100;
++ rs->speed = speed;
++
++ dev_dbg(&spi->dev, "speed: %lu/%u, rate: %u, prescal: %u, loops: %hu\n",
++ clk_get_rate(rs->clk) / rate, speed, rate, prescale,
++ rs->wait_loops);
++
++ return prescale;
++}
++
++static u32 get_arbiter_offset(struct spi_master *master)
++{
++ u32 offset;
++
++ offset = RAMIPS_SPI_ARBITER;
++ if (master->bus_num == 1)
++ offset -= RAMIPS_SPI_DEV_OFFSET;
++
++ return offset;
++}
++
++static void rt2880_spi_set_cs(struct spi_device *spi, bool enable)
++{
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++
++ if (enable)
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++ else
++ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++}
++
++static int rt2880_spi_wait_ready(struct rt2880_spi *rs, int len)
++{
++ int loop = rs->wait_loops * len;
++
++ while ((rt2880_spi_read(rs, RAMIPS_SPI_STAT) & SPISTAT_BUSY) && --loop)
++ cpu_relax();
++
++ if (loop)
++ return 0;
++
++ return -ETIMEDOUT;
++}
++
++static void rt2880_dump_reg(struct spi_master *master)
++{
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++
++ dev_dbg(&master->dev, "stat: %08x, cfg: %08x, ctl: %08x, " \
++ "data: %08x, arb: %08x\n",
++ rt2880_spi_read(rs, RAMIPS_SPI_STAT),
++ rt2880_spi_read(rs, RAMIPS_SPI_CFG),
++ rt2880_spi_read(rs, RAMIPS_SPI_CTL),
++ rt2880_spi_read(rs, RAMIPS_SPI_DATA),
++ rt2880_spi_read(rs, get_arbiter_offset(master)));
++}
++
++static int rt2880_spi_transfer_one(struct spi_master *master,
++ struct spi_device *spi, struct spi_transfer *xfer)
++{
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++ unsigned len;
++ const u8 *tx = xfer->tx_buf;
++ u8 *rx = xfer->rx_buf;
++ int err = 0;
++
++ /* change clock speed */
++ if (unlikely(rs->speed != xfer->speed_hz)) {
++ u32 reg;
++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
++ reg &= ~SPICFG_SPICLK_PRESCALE_MASK;
++ reg |= rt2880_spi_baudrate_get(spi, xfer->speed_hz);
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
++ }
++
++ if (tx) {
++ len = xfer->len;
++ while (len-- > 0) {
++ rt2880_spi_write(rs, RAMIPS_SPI_DATA, *tx++);
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
++ err = rt2880_spi_wait_ready(rs, 1);
++ if (err) {
++ dev_err(&spi->dev, "TX failed, err=%d\n", err);
++ goto out;
++ }
++ }
++ }
++
++ if (rx) {
++ len = xfer->len;
++ while (len-- > 0) {
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
++ err = rt2880_spi_wait_ready(rs, 1);
++ if (err) {
++ dev_err(&spi->dev, "RX failed, err=%d\n", err);
++ goto out;
++ }
++ *rx++ = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
++ }
++ }
++
++out:
++ return err;
++}
++
++/* copy from spi.c */
++static void spi_set_cs(struct spi_device *spi, bool enable)
++{
++ if (spi->mode & SPI_CS_HIGH)
++ enable = !enable;
++
++ if (spi->cs_gpio >= 0)
++ gpio_set_value(spi->cs_gpio, !enable);
++ else if (spi->master->set_cs)
++ spi->master->set_cs(spi, !enable);
++}
++
++static int rt2880_spi_setup(struct spi_device *spi)
++{
++ struct spi_master *master = spi->master;
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++ u32 reg, old_reg, arbit_off;
++
++ if ((spi->max_speed_hz > master->max_speed_hz) ||
++ (spi->max_speed_hz < master->min_speed_hz)) {
++ dev_err(&spi->dev, "invalide requested speed %d Hz\n",
++ spi->max_speed_hz);
++ return -EINVAL;
++ }
++
++ if (!(master->bits_per_word_mask &
++ BIT(spi->bits_per_word - 1))) {
++ dev_err(&spi->dev, "invalide bits_per_word %d\n",
++ spi->bits_per_word);
++ return -EINVAL;
++ }
++
++ /* the hardware seems can't work on mode0 force it to mode3 */
++ if ((spi->mode & (SPI_CPOL | SPI_CPHA)) == SPI_MODE_0) {
++ dev_warn(&spi->dev, "force spi mode3\n");
++ spi->mode |= SPI_MODE_3;
++ }
++
++ /* chip polarity */
++ arbit_off = get_arbiter_offset(master);
++ reg = old_reg = rt2880_spi_read(rs, arbit_off);
++ if (spi->mode & SPI_CS_HIGH) {
++ switch (master->bus_num) {
++ case 1:
++ reg |= SPI1_POR;
++ break;
++ default:
++ reg |= SPI0_POR;
++ break;
++ }
++ } else {
++ switch (master->bus_num) {
++ case 1:
++ reg &= ~SPI1_POR;
++ break;
++ default:
++ reg &= ~SPI0_POR;
++ break;
++ }
++ }
++
++ /* enable spi1 */
++ if (master->bus_num == 1)
++ reg |= SPICTL_ARB_EN;
++
++ if (reg != old_reg)
++ rt2880_spi_write(rs, arbit_off, reg);
++
++ /* deselected the spi device */
++ spi_set_cs(spi, false);
++
++ rt2880_dump_reg(master);
++
++ return 0;
++}
++
++static int rt2880_spi_prepare_message(struct spi_master *master,
++ struct spi_message *msg)
++{
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++ struct spi_device *spi = msg->spi;
++ u32 reg;
++
++ if ((rs->mode == spi->mode) && (rs->speed == spi->max_speed_hz))
++ return 0;
++
++#if 0
++ /* set spido to tri-state */
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO);
++#endif
++
++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
++
++ reg &= ~(SPICFG_MSBFIRST | SPICFG_SPICLKPOL |
++ SPICFG_RXCLKEDGE_FALLING |
++ SPICFG_TXCLKEDGE_FALLING |
++ SPICFG_SPICLK_PRESCALE_MASK);
++
++ /* MSB */
++ if (!(spi->mode & SPI_LSB_FIRST))
++ reg |= SPICFG_MSBFIRST;
++
++ /* spi mode */
++ switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
++ case SPI_MODE_0:
++ reg |= SPICFG_TXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_1:
++ reg |= SPICFG_RXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_2:
++ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_3:
++ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
++ break;
++ }
++ rs->mode = spi->mode;
++
++#if 0
++ /* set spiclk and spiena to tri-state */
++ reg |= SPICFG_HIZSPI;
++#endif
++
++ /* clock divide */
++ reg |= rt2880_spi_baudrate_get(spi, spi->max_speed_hz);
++
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
++
++ return 0;
++}
++
++static int rt2880_spi_probe(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct rt2880_spi *rs;
++ void __iomem *base;
++ struct resource *r;
++ struct clk *clk;
++ int ret;
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ base = devm_ioremap_resource(&pdev->dev, r);
++ if (IS_ERR(base))
++ return PTR_ERR(base);
++
++ clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(clk)) {
++ dev_err(&pdev->dev, "unable to get SYS clock\n");
++ return PTR_ERR(clk);
++ }
++
++ ret = clk_prepare_enable(clk);
++ if (ret)
++ goto err_clk;
++
++ master = spi_alloc_master(&pdev->dev, sizeof(*rs));
++ if (master == NULL) {
++ dev_dbg(&pdev->dev, "master allocation failed\n");
++ ret = -ENOMEM;
++ goto err_clk;
++ }
++
++ master->dev.of_node = pdev->dev.of_node;
++ master->mode_bits = RT2880_SPI_MODE_BITS;
++ master->bits_per_word_mask = SPI_BPW_MASK(8);
++ master->min_speed_hz = clk_get_rate(clk) / 128;
++ master->max_speed_hz = clk_get_rate(clk) / 2;
++ master->flags = SPI_MASTER_HALF_DUPLEX;
++ master->setup = rt2880_spi_setup;
++ master->prepare_message = rt2880_spi_prepare_message;
++ master->set_cs = rt2880_spi_set_cs;
++ master->transfer_one = rt2880_spi_transfer_one,
++
++ dev_set_drvdata(&pdev->dev, master);
++
++ rs = spi_master_get_devdata(master);
++ rs->master = master;
++ rs->base = base;
++ rs->clk = clk;
++
++ if (atomic_inc_return(&hw_reset_count) == 1)
++ device_reset(&pdev->dev);
++
++ ret = devm_spi_register_master(&pdev->dev, master);
++ if (ret < 0) {
++ dev_err(&pdev->dev, "devm_spi_register_master error.\n");
++ goto err_master;
++ }
++
++ return ret;
++
++err_master:
++ spi_master_put(master);
++ kfree(master);
++err_clk:
++ clk_disable_unprepare(clk);
++
++ return ret;
++}
++
++static int rt2880_spi_remove(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct rt2880_spi *rs;
++
++ master = dev_get_drvdata(&pdev->dev);
++ rs = spi_master_get_devdata(master);
++
++ clk_disable_unprepare(rs->clk);
++ atomic_dec(&hw_reset_count);
++
++ return 0;
++}
++
++MODULE_ALIAS("platform:" DRIVER_NAME);
++
++static const struct of_device_id rt2880_spi_match[] = {
++ { .compatible = "ralink,rt2880-spi" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, rt2880_spi_match);
++
++static struct platform_driver rt2880_spi_driver = {
++ .driver = {
++ .name = DRIVER_NAME,
++ .owner = THIS_MODULE,
++ .of_match_table = rt2880_spi_match,
++ },
++ .probe = rt2880_spi_probe,
++ .remove = rt2880_spi_remove,
++};
++
++module_platform_driver(rt2880_spi_driver);
++
++MODULE_DESCRIPTION("Ralink SPI driver");
++MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL");
--- /dev/null
+From 723b8beaabf3c3c4b1ce69480141f1e926f3f3b2 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:52:56 +0100
+Subject: [PATCH 44/53] i2c: MIPS: adds ralink I2C driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++
+ drivers/i2c/busses/Kconfig | 4 +
+ drivers/i2c/busses/Makefile | 1 +
+ drivers/i2c/busses/i2c-ralink.c | 327 ++++++++++++++++++++
+ 4 files changed, 359 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+ create mode 100644 drivers/i2c/busses/i2c-ralink.c
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+@@ -0,0 +1,27 @@
++I2C for Ralink platforms
++
++Required properties :
++- compatible : Must be "link,rt3052-i2c"
++- reg: physical base address of the controller and length of memory mapped
++ region.
++- #address-cells = <1>;
++- #size-cells = <0>;
++
++Optional properties:
++- Child nodes conforming to i2c bus binding
++
++Example :
++
++palmbus@10000000 {
++ i2c@900 {
++ compatible = "link,rt3052-i2c";
++ reg = <0x900 0x100>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ hwmon@4b {
++ compatible = "national,lm92";
++ reg = <0x4b>;
++ };
++ };
++};
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -954,6 +954,11 @@ config I2C_RK3X
+ This driver can also be built as a module. If so, the module will
+ be called i2c-rk3x.
+
++config I2C_RALINK
++ tristate "Ralink I2C Controller"
++ depends on RALINK && !SOC_MT7621
++ select OF_I2C
++
+ config HAVE_S3C2410_I2C
+ bool
+ help
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -90,6 +90,7 @@ obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
+ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
+ obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
+ obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
++obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o
+ obj-$(CONFIG_I2C_QCOM_CCI) += i2c-qcom-cci.o
+ obj-$(CONFIG_I2C_QCOM_GENI) += i2c-qcom-geni.o
+ obj-$(CONFIG_I2C_QUP) += i2c-qup.o
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-ralink.c
+@@ -0,0 +1,435 @@
++/*
++ * drivers/i2c/busses/i2c-ralink.c
++ *
++ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
++ * Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
++ *
++ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
++ * (C) 2014 Sittisak <sittisaks@hotmail.com>
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/reset.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/errno.h>
++#include <linux/platform_device.h>
++#include <linux/of_platform.h>
++#include <linux/i2c.h>
++#include <linux/io.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++
++#define REG_CONFIG_REG 0x00
++#define REG_CLKDIV_REG 0x04
++#define REG_DEVADDR_REG 0x08
++#define REG_ADDR_REG 0x0C
++#define REG_DATAOUT_REG 0x10
++#define REG_DATAIN_REG 0x14
++#define REG_STATUS_REG 0x18
++#define REG_STARTXFR_REG 0x1C
++#define REG_BYTECNT_REG 0x20
++
++/* REG_CONFIG_REG */
++#define I2C_ADDRLEN_OFFSET 5
++#define I2C_DEVADLEN_OFFSET 2
++#define I2C_ADDRLEN_MASK 0x3
++#define I2C_ADDR_DIS BIT(1)
++#define I2C_DEVADDR_DIS BIT(0)
++#define I2C_ADDRLEN_8 (7 << I2C_ADDRLEN_OFFSET)
++#define I2C_DEVADLEN_7 (6 << I2C_DEVADLEN_OFFSET)
++#define I2C_CONF_DEFAULT (I2C_ADDRLEN_8 | I2C_DEVADLEN_7)
++
++/* REG_CLKDIV_REG */
++#define I2C_CLKDIV_MASK 0xffff
++
++/* REG_DEVADDR_REG */
++#define I2C_DEVADDR_MASK 0x7f
++
++/* REG_ADDR_REG */
++#define I2C_ADDR_MASK 0xff
++
++/* REG_STATUS_REG */
++#define I2C_STARTERR BIT(4)
++#define I2C_ACKERR BIT(3)
++#define I2C_DATARDY BIT(2)
++#define I2C_SDOEMPTY BIT(1)
++#define I2C_BUSY BIT(0)
++
++/* REG_STARTXFR_REG */
++#define NOSTOP_CMD BIT(2)
++#define NODATA_CMD BIT(1)
++#define READ_CMD BIT(0)
++
++/* REG_BYTECNT_REG */
++#define BYTECNT_MAX 64
++#define SET_BYTECNT(x) (x - 1)
++
++/* timeout waiting for I2C devices to respond (clock streching) */
++#define TIMEOUT_MS 1000
++#define DELAY_INTERVAL_US 100
++
++struct rt_i2c {
++ void __iomem *base;
++ struct clk *clk;
++ struct device *dev;
++ struct i2c_adapter adap;
++ u32 cur_clk;
++ u32 clk_div;
++ u32 flags;
++};
++
++static void rt_i2c_w32(struct rt_i2c *i2c, u32 val, unsigned reg)
++{
++ iowrite32(val, i2c->base + reg);
++}
++
++static u32 rt_i2c_r32(struct rt_i2c *i2c, unsigned reg)
++{
++ return ioread32(i2c->base + reg);
++}
++
++static int poll_down_timeout(void __iomem *addr, u32 mask)
++{
++ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
++
++ do {
++ if (!(readl_relaxed(addr) & mask))
++ return 0;
++
++ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
++ } while (time_before(jiffies, timeout));
++
++ return (readl_relaxed(addr) & mask) ? -EAGAIN : 0;
++}
++
++static int rt_i2c_wait_idle(struct rt_i2c *i2c)
++{
++ int ret;
++
++ ret = poll_down_timeout(i2c->base + REG_STATUS_REG, I2C_BUSY);
++ if (ret < 0)
++ dev_dbg(i2c->dev, "idle err(%d)\n", ret);
++
++ return ret;
++}
++
++static int poll_up_timeout(void __iomem *addr, u32 mask)
++{
++ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
++ u32 status;
++
++ do {
++ status = readl_relaxed(addr);
++
++ /* check error status */
++ if (status & I2C_STARTERR)
++ return -EAGAIN;
++ else if (status & I2C_ACKERR)
++ return -ENXIO;
++ else if (status & mask)
++ return 0;
++
++ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
++ } while (time_before(jiffies, timeout));
++
++ return -ETIMEDOUT;
++}
++
++static int rt_i2c_wait_rx_done(struct rt_i2c *i2c)
++{
++ int ret;
++
++ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_DATARDY);
++ if (ret < 0)
++ dev_dbg(i2c->dev, "rx err(%d)\n", ret);
++
++ return ret;
++}
++
++static int rt_i2c_wait_tx_done(struct rt_i2c *i2c)
++{
++ int ret;
++
++ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_SDOEMPTY);
++ if (ret < 0)
++ dev_dbg(i2c->dev, "tx err(%d)\n", ret);
++
++ return ret;
++}
++
++static void rt_i2c_reset(struct rt_i2c *i2c)
++{
++ device_reset(i2c->adap.dev.parent);
++ barrier();
++ rt_i2c_w32(i2c, i2c->clk_div, REG_CLKDIV_REG);
++}
++
++static void rt_i2c_dump_reg(struct rt_i2c *i2c)
++{
++ dev_dbg(i2c->dev, "conf %08x, clkdiv %08x, devaddr %08x, " \
++ "addr %08x, dataout %08x, datain %08x, " \
++ "status %08x, startxfr %08x, bytecnt %08x\n",
++ rt_i2c_r32(i2c, REG_CONFIG_REG),
++ rt_i2c_r32(i2c, REG_CLKDIV_REG),
++ rt_i2c_r32(i2c, REG_DEVADDR_REG),
++ rt_i2c_r32(i2c, REG_ADDR_REG),
++ rt_i2c_r32(i2c, REG_DATAOUT_REG),
++ rt_i2c_r32(i2c, REG_DATAIN_REG),
++ rt_i2c_r32(i2c, REG_STATUS_REG),
++ rt_i2c_r32(i2c, REG_STARTXFR_REG),
++ rt_i2c_r32(i2c, REG_BYTECNT_REG));
++}
++
++static int rt_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
++ int num)
++{
++ struct rt_i2c *i2c;
++ struct i2c_msg *pmsg;
++ unsigned char addr;
++ int i, j, ret;
++ u32 cmd;
++
++ i2c = i2c_get_adapdata(adap);
++
++ for (i = 0; i < num; i++) {
++ pmsg = &msgs[i];
++ if (i == (num - 1))
++ cmd = 0;
++ else
++ cmd = NOSTOP_CMD;
++
++ dev_dbg(i2c->dev, "addr: 0x%x, len: %d, flags: 0x%x, stop: %d\n",
++ pmsg->addr, pmsg->len, pmsg->flags,
++ (cmd == 0)? 1 : 0);
++
++ /* wait hardware idle */
++ if ((ret = rt_i2c_wait_idle(i2c)))
++ goto err_timeout;
++
++ if (pmsg->flags & I2C_M_TEN) {
++ rt_i2c_w32(i2c, I2C_CONF_DEFAULT, REG_CONFIG_REG);
++ /* 10 bits address */
++ addr = 0x78 | ((pmsg->addr >> 8) & 0x03);
++ rt_i2c_w32(i2c, addr & I2C_DEVADDR_MASK,
++ REG_DEVADDR_REG);
++ rt_i2c_w32(i2c, pmsg->addr & I2C_ADDR_MASK,
++ REG_ADDR_REG);
++ } else {
++ rt_i2c_w32(i2c, I2C_CONF_DEFAULT | I2C_ADDR_DIS,
++ REG_CONFIG_REG);
++ /* 7 bits address */
++ rt_i2c_w32(i2c, pmsg->addr & I2C_DEVADDR_MASK,
++ REG_DEVADDR_REG);
++ }
++
++ /* buffer length */
++ if (pmsg->len == 0)
++ cmd |= NODATA_CMD;
++ else
++ rt_i2c_w32(i2c, SET_BYTECNT(pmsg->len),
++ REG_BYTECNT_REG);
++
++ j = 0;
++ if (pmsg->flags & I2C_M_RD) {
++ cmd |= READ_CMD;
++ /* start transfer */
++ barrier();
++ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG);
++ do {
++ /* wait */
++ if ((ret = rt_i2c_wait_rx_done(i2c)))
++ goto err_timeout;
++ /* read data */
++ if (pmsg->len)
++ pmsg->buf[j] = rt_i2c_r32(i2c,
++ REG_DATAIN_REG);
++ j++;
++ } while (j < pmsg->len);
++ } else {
++ do {
++ /* write data */
++ if (pmsg->len)
++ rt_i2c_w32(i2c, pmsg->buf[j],
++ REG_DATAOUT_REG);
++ /* start transfer */
++ if (j == 0) {
++ barrier();
++ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG);
++ }
++ /* wait */
++ if ((ret = rt_i2c_wait_tx_done(i2c)))
++ goto err_timeout;
++ j++;
++ } while (j < pmsg->len);
++ }
++ }
++ /* the return value is number of executed messages */
++ ret = i;
++
++ return ret;
++
++err_timeout:
++ rt_i2c_dump_reg(i2c);
++ rt_i2c_reset(i2c);
++ return ret;
++}
++
++static u32 rt_i2c_func(struct i2c_adapter *a)
++{
++ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
++}
++
++static const struct i2c_algorithm rt_i2c_algo = {
++ .master_xfer = rt_i2c_master_xfer,
++ .functionality = rt_i2c_func,
++};
++
++static const struct of_device_id i2c_rt_dt_ids[] = {
++ { .compatible = "ralink,rt2880-i2c" },
++ { /* sentinel */ }
++};
++
++MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
++
++static struct i2c_adapter_quirks rt_i2c_quirks = {
++ .max_write_len = BYTECNT_MAX,
++ .max_read_len = BYTECNT_MAX,
++};
++
++static int rt_i2c_init(struct rt_i2c *i2c)
++{
++ u32 reg;
++
++ /* i2c_sclk = periph_clk / ((2 * clk_div) + 5) */
++ i2c->clk_div = (clk_get_rate(i2c->clk) - (5 * i2c->cur_clk)) /
++ (2 * i2c->cur_clk);
++ if (i2c->clk_div < 8)
++ i2c->clk_div = 8;
++ if (i2c->clk_div > I2C_CLKDIV_MASK)
++ i2c->clk_div = I2C_CLKDIV_MASK;
++
++ /* check support combinde/repeated start message */
++ rt_i2c_w32(i2c, NOSTOP_CMD, REG_STARTXFR_REG);
++ reg = rt_i2c_r32(i2c, REG_STARTXFR_REG) & NOSTOP_CMD;
++
++ rt_i2c_reset(i2c);
++
++ return reg;
++}
++
++static int rt_i2c_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ struct rt_i2c *i2c;
++ struct i2c_adapter *adap;
++ const struct of_device_id *match;
++ int ret, restart;
++
++ match = of_match_device(i2c_rt_dt_ids, &pdev->dev);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ dev_err(&pdev->dev, "no memory resource found\n");
++ return -ENODEV;
++ }
++
++ i2c = devm_kzalloc(&pdev->dev, sizeof(struct rt_i2c), GFP_KERNEL);
++ if (!i2c) {
++ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
++ return -ENOMEM;
++ }
++
++ i2c->base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(i2c->base))
++ return PTR_ERR(i2c->base);
++
++ i2c->clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(i2c->clk)) {
++ dev_err(&pdev->dev, "no clock defined\n");
++ return -ENODEV;
++ }
++ clk_prepare_enable(i2c->clk);
++ i2c->dev = &pdev->dev;
++
++ if (of_property_read_u32(pdev->dev.of_node,
++ "clock-frequency", &i2c->cur_clk))
++ i2c->cur_clk = 100000;
++
++ adap = &i2c->adap;
++ adap->owner = THIS_MODULE;
++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
++ adap->algo = &rt_i2c_algo;
++ adap->retries = 3;
++ adap->dev.parent = &pdev->dev;
++ i2c_set_adapdata(adap, i2c);
++ adap->dev.of_node = pdev->dev.of_node;
++ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
++ adap->quirks = &rt_i2c_quirks;
++
++ platform_set_drvdata(pdev, i2c);
++
++ restart = rt_i2c_init(i2c);
++
++ ret = i2c_add_adapter(adap);
++ if (ret < 0) {
++ dev_err(&pdev->dev, "failed to add adapter\n");
++ clk_disable_unprepare(i2c->clk);
++ return ret;
++ }
++
++ dev_info(&pdev->dev, "clock %uKHz, re-start %ssupport\n",
++ i2c->cur_clk/1000, restart ? "" : "not ");
++
++ return ret;
++}
++
++static int rt_i2c_remove(struct platform_device *pdev)
++{
++ struct rt_i2c *i2c = platform_get_drvdata(pdev);
++
++ i2c_del_adapter(&i2c->adap);
++ clk_disable_unprepare(i2c->clk);
++
++ return 0;
++}
++
++static struct platform_driver rt_i2c_driver = {
++ .probe = rt_i2c_probe,
++ .remove = rt_i2c_remove,
++ .driver = {
++ .owner = THIS_MODULE,
++ .name = "i2c-ralink",
++ .of_match_table = i2c_rt_dt_ids,
++ },
++};
++
++static int __init i2c_rt_init (void)
++{
++ return platform_driver_register(&rt_i2c_driver);
++}
++subsys_initcall(i2c_rt_init);
++
++static void __exit i2c_rt_exit (void)
++{
++ platform_driver_unregister(&rt_i2c_driver);
++}
++module_exit(i2c_rt_exit);
++
++MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
++MODULE_DESCRIPTION("Ralink I2c host driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:Ralink-I2C");
--- /dev/null
+From 23147af14531cbdada194b94120ef8774f46292d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 13 Nov 2014 19:08:40 +0100
+Subject: [PATCH 46/53] mmc: MIPS: ralink: add sdhci for mt7620a SoC
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mmc/host/Kconfig | 2 +
+ drivers/mmc/host/Makefile | 1 +
+ drivers/mmc/host/mtk-mmc/Kconfig | 16 +
+ drivers/mmc/host/mtk-mmc/Makefile | 42 +
+ drivers/mmc/host/mtk-mmc/board.h | 137 ++
+ drivers/mmc/host/mtk-mmc/dbg.c | 347 ++++
+ drivers/mmc/host/mtk-mmc/dbg.h | 156 ++
+ drivers/mmc/host/mtk-mmc/mt6575_sd.h | 1001 +++++++++++
+ drivers/mmc/host/mtk-mmc/sd.c | 3060 ++++++++++++++++++++++++++++++++++
+ 9 files changed, 4762 insertions(+)
+ create mode 100644 drivers/mmc/host/mtk-mmc/Kconfig
+ create mode 100644 drivers/mmc/host/mtk-mmc/Makefile
+ create mode 100644 drivers/mmc/host/mtk-mmc/board.h
+ create mode 100644 drivers/mmc/host/mtk-mmc/dbg.c
+ create mode 100644 drivers/mmc/host/mtk-mmc/dbg.h
+ create mode 100644 drivers/mmc/host/mtk-mmc/mt6575_sd.h
+ create mode 100644 drivers/mmc/host/mtk-mmc/sd.c
+
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -1101,3 +1101,5 @@ config MMC_OWL
+
+ config MMC_SDHCI_EXTERNAL_DMA
+ bool
++
++source "drivers/mmc/host/mtk-mmc/Kconfig"
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -3,6 +3,7 @@
+ # Makefile for MMC/SD host controller drivers
+ #
+
++obj-$(CONFIG_MTK_MMC) += mtk-mmc/
+ obj-$(CONFIG_MMC_ARMMMCI) += armmmci.o
+ armmmci-y := mmci.o
+ armmmci-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o
--- /dev/null
+From 7f29222b1731e8182ba94a331531dec18865a1e4 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:31:47 +0100
+Subject: [PATCH 48/53] asoc: add mt7620 support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/of.c | 2 +
+ sound/soc/Kconfig | 1 +
+ sound/soc/Makefile | 1 +
+ sound/soc/ralink/Kconfig | 15 ++
+ sound/soc/ralink/Makefile | 11 +
+ sound/soc/ralink/mt7620-i2s.c | 436 ++++++++++++++++++++++++++++++++++++++
+ sound/soc/ralink/mt7620-wm8960.c | 233 ++++++++++++++++++++
+ 7 files changed, 699 insertions(+)
+ create mode 100644 sound/soc/ralink/Kconfig
+ create mode 100644 sound/soc/ralink/Makefile
+ create mode 100644 sound/soc/ralink/mt7620-i2s.c
+ create mode 100644 sound/soc/ralink/mt7620-wm8960.c
+
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -13,6 +13,7 @@
+ #include <linux/of_fdt.h>
+ #include <linux/kernel.h>
+ #include <linux/memblock.h>
++#include <linux/module.h>
+ #include <linux/of_platform.h>
+ #include <linux/of_address.h>
+
+@@ -24,6 +25,7 @@
+ #include "common.h"
+
+ __iomem void *rt_sysc_membase;
++EXPORT_SYMBOL(rt_sysc_membase);
+ __iomem void *rt_memc_membase;
+
+ __iomem void *plat_of_remap_node(const char *node)
+--- a/sound/soc/Kconfig
++++ b/sound/soc/Kconfig
+@@ -60,6 +60,7 @@ source "sound/soc/mxs/Kconfig"
+ source "sound/soc/pxa/Kconfig"
+ source "sound/soc/qcom/Kconfig"
+ source "sound/soc/rockchip/Kconfig"
++source "sound/soc/ralink/Kconfig"
+ source "sound/soc/samsung/Kconfig"
+ source "sound/soc/sh/Kconfig"
+ source "sound/soc/sirf/Kconfig"
+--- a/sound/soc/Makefile
++++ b/sound/soc/Makefile
+@@ -43,6 +43,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/
+ obj-$(CONFIG_SND_SOC) += pxa/
+ obj-$(CONFIG_SND_SOC) += qcom/
+ obj-$(CONFIG_SND_SOC) += rockchip/
++obj-$(CONFIG_SND_SOC) += ralink/
+ obj-$(CONFIG_SND_SOC) += samsung/
+ obj-$(CONFIG_SND_SOC) += sh/
+ obj-$(CONFIG_SND_SOC) += sirf/
+--- /dev/null
++++ b/sound/soc/ralink/Kconfig
+@@ -0,0 +1,8 @@
++config SND_RALINK_SOC_I2S
++ depends on RALINK && SND_SOC && !SOC_RT288X
++ select SND_SOC_GENERIC_DMAENGINE_PCM
++ select REGMAP_MMIO
++ tristate "SoC Audio (I2S protocol) for Ralink SoC"
++ help
++ Say Y if you want to use I2S protocol and I2S codec on Ralink/MediaTek
++ based boards.
+--- /dev/null
++++ b/sound/soc/ralink/Makefile
+@@ -0,0 +1,6 @@
++#
++# Ralink/MediaTek Platform Support
++#
++snd-soc-ralink-i2s-objs := ralink-i2s.o
++
++obj-$(CONFIG_SND_RALINK_SOC_I2S) += snd-soc-ralink-i2s.o
+--- /dev/null
++++ b/sound/soc/ralink/ralink-i2s.c
+@@ -0,0 +1,965 @@
++/*
++ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
++ * Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/regmap.h>
++#include <linux/reset.h>
++#include <linux/debugfs.h>
++#include <linux/of_device.h>
++#include <sound/pcm_params.h>
++#include <sound/dmaengine_pcm.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define DRV_NAME "ralink-i2s"
++
++#define I2S_REG_CFG0 0x00
++#define I2S_REG_INT_STATUS 0x04
++#define I2S_REG_INT_EN 0x08
++#define I2S_REG_FF_STATUS 0x0c
++#define I2S_REG_WREG 0x10
++#define I2S_REG_RREG 0x14
++#define I2S_REG_CFG1 0x18
++#define I2S_REG_DIVCMP 0x20
++#define I2S_REG_DIVINT 0x24
++
++/* I2S_REG_CFG0 */
++#define I2S_REG_CFG0_EN BIT(31)
++#define I2S_REG_CFG0_DMA_EN BIT(30)
++#define I2S_REG_CFG0_BYTE_SWAP BIT(28)
++#define I2S_REG_CFG0_TX_EN BIT(24)
++#define I2S_REG_CFG0_RX_EN BIT(20)
++#define I2S_REG_CFG0_SLAVE BIT(16)
++#define I2S_REG_CFG0_RX_THRES 12
++#define I2S_REG_CFG0_TX_THRES 4
++#define I2S_REG_CFG0_THRES_MASK (0xf << I2S_REG_CFG0_RX_THRES) | \
++ (4 << I2S_REG_CFG0_TX_THRES)
++#define I2S_REG_CFG0_DFT_THRES (4 << I2S_REG_CFG0_RX_THRES) | \
++ (4 << I2S_REG_CFG0_TX_THRES)
++/* RT305x */
++#define I2S_REG_CFG0_CLK_DIS BIT(8)
++#define I2S_REG_CFG0_TXCH_SWAP BIT(3)
++#define I2S_REG_CFG0_TXCH1_OFF BIT(2)
++#define I2S_REG_CFG0_TXCH0_OFF BIT(1)
++#define I2S_REG_CFG0_SLAVE_EN BIT(0)
++/* RT3883 */
++#define I2S_REG_CFG0_RXCH_SWAP BIT(11)
++#define I2S_REG_CFG0_RXCH1_OFF BIT(10)
++#define I2S_REG_CFG0_RXCH0_OFF BIT(9)
++#define I2S_REG_CFG0_WS_INV BIT(0)
++/* MT7628 */
++#define I2S_REG_CFG0_FMT_LE BIT(29)
++#define I2S_REG_CFG0_SYS_BE BIT(28)
++#define I2S_REG_CFG0_NORM_24 BIT(18)
++#define I2S_REG_CFG0_DATA_24 BIT(17)
++
++/* I2S_REG_INT_STATUS */
++#define I2S_REG_INT_RX_FAULT BIT(7)
++#define I2S_REG_INT_RX_OVRUN BIT(6)
++#define I2S_REG_INT_RX_UNRUN BIT(5)
++#define I2S_REG_INT_RX_THRES BIT(4)
++#define I2S_REG_INT_TX_FAULT BIT(3)
++#define I2S_REG_INT_TX_OVRUN BIT(2)
++#define I2S_REG_INT_TX_UNRUN BIT(1)
++#define I2S_REG_INT_TX_THRES BIT(0)
++#define I2S_REG_INT_TX_MASK 0xf
++#define I2S_REG_INT_RX_MASK 0xf0
++
++/* I2S_REG_INT_STATUS */
++#define I2S_RX_AVCNT(x) ((x >> 4) & 0xf)
++#define I2S_TX_AVCNT(x) (x & 0xf)
++/* MT7628 */
++#define MT7628_I2S_RX_AVCNT(x) ((x >> 8) & 0x1f)
++#define MT7628_I2S_TX_AVCNT(x) (x & 0x1f)
++
++/* I2S_REG_CFG1 */
++#define I2S_REG_CFG1_LBK BIT(31)
++#define I2S_REG_CFG1_EXTLBK BIT(30)
++/* RT3883 */
++#define I2S_REG_CFG1_LEFT_J BIT(0)
++#define I2S_REG_CFG1_RIGHT_J BIT(1)
++#define I2S_REG_CFG1_FMT_MASK 0x3
++
++/* I2S_REG_DIVCMP */
++#define I2S_REG_DIVCMP_CLKEN BIT(31)
++#define I2S_REG_DIVCMP_DIVCOMP_MASK 0x1ff
++
++/* I2S_REG_DIVINT */
++#define I2S_REG_DIVINT_MASK 0x3ff
++
++/* BCLK dividers */
++#define RALINK_I2S_DIVCMP 0
++#define RALINK_I2S_DIVINT 1
++
++/* FIFO */
++#define RALINK_I2S_FIFO_SIZE 32
++
++/* feature flags */
++#define RALINK_FLAGS_TXONLY BIT(0)
++#define RALINK_FLAGS_LEFT_J BIT(1)
++#define RALINK_FLAGS_RIGHT_J BIT(2)
++#define RALINK_FLAGS_ENDIAN BIT(3)
++#define RALINK_FLAGS_24BIT BIT(4)
++
++#define RALINK_I2S_INT_EN 0
++
++struct ralink_i2s_stats {
++ u32 dmafault;
++ u32 overrun;
++ u32 underrun;
++ u32 belowthres;
++};
++
++struct ralink_i2s {
++ struct device *dev;
++ void __iomem *regs;
++ struct clk *clk;
++ struct regmap *regmap;
++ u32 flags;
++ unsigned int fmt;
++ u16 txdma_req;
++ u16 rxdma_req;
++
++ struct snd_dmaengine_dai_dma_data playback_dma_data;
++ struct snd_dmaengine_dai_dma_data capture_dma_data;
++
++ struct dentry *dbg_dir;
++ struct dentry *dbg_stats;
++ struct ralink_i2s_stats txstats;
++ struct ralink_i2s_stats rxstats;
++};
++
++static void ralink_i2s_dump_regs(struct ralink_i2s *i2s)
++{
++ u32 buf[10];
++ int ret;
++
++ ret = regmap_bulk_read(i2s->regmap, I2S_REG_CFG0,
++ buf, ARRAY_SIZE(buf));
++
++ dev_dbg(i2s->dev, "CFG0: %08x, INTSTAT: %08x, INTEN: %08x, " \
++ "FFSTAT: %08x, WREG: %08x, RREG: %08x, " \
++ "CFG1: %08x, DIVCMP: %08x, DIVINT: %08x\n",
++ buf[0], buf[1], buf[2], buf[3], buf[4],
++ buf[5], buf[6], buf[8], buf[9]);
++}
++
++static int ralink_i2s_set_sysclk(struct snd_soc_dai *dai,
++ int clk_id, unsigned int freq, int dir)
++{
++ return 0;
++}
++
++static int ralink_i2s_set_sys_bclk(struct snd_soc_dai *dai, int width, int rate)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ unsigned long clk = clk_get_rate(i2s->clk);
++ int div;
++ uint32_t data;
++
++ /* disable clock at slave mode */
++ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
++ SND_SOC_DAIFMT_CBM_CFM) {
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_CLK_DIS,
++ I2S_REG_CFG0_CLK_DIS);
++ return 0;
++ }
++
++ /* FREQOUT = FREQIN / (I2S_CLK_DIV + 1) */
++ div = (clk / rate ) - 1;
++
++ data = rt_sysc_r32(0x30);
++ data &= (0xff << 8);
++ data |= (0x1 << 15) | (div << 8);
++ rt_sysc_w32(data, 0x30);
++
++ /* enable clock */
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_CLK_DIS, 0);
++
++ dev_dbg(i2s->dev, "clk: %lu, rate: %u, div: %d\n",
++ clk, rate, div);
++
++ return 0;
++}
++
++static int ralink_i2s_set_bclk(struct snd_soc_dai *dai, int width, int rate)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ unsigned long clk = clk_get_rate(i2s->clk);
++ int divint, divcomp;
++
++ /* disable clock at slave mode */
++ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
++ SND_SOC_DAIFMT_CBM_CFM) {
++ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP,
++ I2S_REG_DIVCMP_CLKEN, 0);
++ return 0;
++ }
++
++ /* FREQOUT = FREQIN * (1/2) * (1/(DIVINT + DIVCOMP/512)) */
++ clk = clk / (2 * 2 * width);
++ divint = clk / rate;
++ divcomp = ((clk % rate) * 512) / rate;
++
++ if ((divint > I2S_REG_DIVINT_MASK) ||
++ (divcomp > I2S_REG_DIVCMP_DIVCOMP_MASK))
++ return -EINVAL;
++
++ regmap_update_bits(i2s->regmap, I2S_REG_DIVINT,
++ I2S_REG_DIVINT_MASK, divint);
++ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP,
++ I2S_REG_DIVCMP_DIVCOMP_MASK, divcomp);
++
++ /* enable clock */
++ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, I2S_REG_DIVCMP_CLKEN,
++ I2S_REG_DIVCMP_CLKEN);
++
++ dev_dbg(i2s->dev, "clk: %lu, rate: %u, int: %d, comp: %d\n",
++ clk_get_rate(i2s->clk), rate, divint, divcomp);
++
++ return 0;
++}
++
++static int ralink_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ unsigned int cfg0 = 0, cfg1 = 0;
++
++ /* set master/slave audio interface */
++ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
++ case SND_SOC_DAIFMT_CBM_CFM:
++ if (i2s->flags & RALINK_FLAGS_TXONLY)
++ cfg0 |= I2S_REG_CFG0_SLAVE_EN;
++ else
++ cfg0 |= I2S_REG_CFG0_SLAVE;
++ break;
++ case SND_SOC_DAIFMT_CBS_CFS:
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ /* interface format */
++ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
++ case SND_SOC_DAIFMT_I2S:
++ break;
++ case SND_SOC_DAIFMT_RIGHT_J:
++ if (i2s->flags & RALINK_FLAGS_RIGHT_J) {
++ cfg1 |= I2S_REG_CFG1_RIGHT_J;
++ break;
++ }
++ return -EINVAL;
++ case SND_SOC_DAIFMT_LEFT_J:
++ if (i2s->flags & RALINK_FLAGS_LEFT_J) {
++ cfg1 |= I2S_REG_CFG1_LEFT_J;
++ break;
++ }
++ return -EINVAL;
++ default:
++ return -EINVAL;
++ }
++
++ /* clock inversion */
++ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
++ case SND_SOC_DAIFMT_NB_NF:
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (i2s->flags & RALINK_FLAGS_TXONLY) {
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_SLAVE_EN, cfg0);
++ } else {
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_SLAVE, cfg0);
++ }
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG1,
++ I2S_REG_CFG1_FMT_MASK, cfg1);
++ i2s->fmt = fmt;
++
++ return 0;
++}
++
++static int ralink_i2s_startup(struct snd_pcm_substream *substream,
++ struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++
++ if (snd_soc_dai_active(dai))
++ return 0;
++
++ /* setup status interrupt */
++#if (RALINK_I2S_INT_EN)
++ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0xff);
++#else
++ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0x0);
++#endif
++
++ /* enable */
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN |
++ I2S_REG_CFG0_THRES_MASK,
++ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN |
++ I2S_REG_CFG0_DFT_THRES);
++
++ return 0;
++}
++
++static void ralink_i2s_shutdown(struct snd_pcm_substream *substream,
++ struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++
++ /* If both streams are stopped, disable module and clock */
++ if (snd_soc_dai_active(dai))
++ return;
++
++ /*
++ * datasheet mention when disable all control regs are cleared
++ * to initial values. need reinit at startup.
++ */
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_EN, 0);
++}
++
++static int ralink_i2s_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ int width;
++ int ret;
++
++ width = params_width(params);
++ switch (width) {
++ case 16:
++ if (i2s->flags & RALINK_FLAGS_24BIT)
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_DATA_24, 0);
++ break;
++ case 24:
++ if (i2s->flags & RALINK_FLAGS_24BIT) {
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_DATA_24,
++ I2S_REG_CFG0_DATA_24);
++ break;
++ }
++ return -EINVAL;
++ default:
++ return -EINVAL;
++ }
++
++ switch (params_channels(params)) {
++ case 2:
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ if (i2s->flags & RALINK_FLAGS_ENDIAN) {
++ /* system endian */
++#ifdef SNDRV_LITTLE_ENDIAN
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_SYS_BE, 0);
++#else
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_SYS_BE,
++ I2S_REG_CFG0_SYS_BE);
++#endif
++
++ /* data endian */
++ switch (params_format(params)) {
++ case SNDRV_PCM_FORMAT_S16_LE:
++ case SNDRV_PCM_FORMAT_S24_LE:
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_FMT_LE,
++ I2S_REG_CFG0_FMT_LE);
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE:
++ case SNDRV_PCM_FORMAT_S24_BE:
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0,
++ I2S_REG_CFG0_FMT_LE, 0);
++ break;
++ default:
++ return -EINVAL;
++ }
++ }
++
++ /* setup bclk rate */
++ if (i2s->flags & RALINK_FLAGS_TXONLY)
++ ret = ralink_i2s_set_sys_bclk(dai, width, params_rate(params));
++ else
++ ret = ralink_i2s_set_bclk(dai, width, params_rate(params));
++
++ return ret;
++}
++
++static int ralink_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
++ struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++ unsigned int mask, val;
++
++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++ mask = I2S_REG_CFG0_TX_EN;
++ else
++ mask = I2S_REG_CFG0_RX_EN;
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ case SNDRV_PCM_TRIGGER_RESUME:
++ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
++ val = mask;
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ case SNDRV_PCM_TRIGGER_SUSPEND:
++ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
++ val = 0;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, mask, val);
++
++ return 0;
++}
++
++static void ralink_i2s_init_dma_data(struct ralink_i2s *i2s,
++ struct resource *res)
++{
++ struct snd_dmaengine_dai_dma_data *dma_data;
++
++ /* Playback */
++ dma_data = &i2s->playback_dma_data;
++ dma_data->addr = res->start + I2S_REG_WREG;
++ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ dma_data->maxburst = 1;
++ dma_data->slave_id = i2s->txdma_req;
++
++ if (i2s->flags & RALINK_FLAGS_TXONLY)
++ return;
++
++ /* Capture */
++ dma_data = &i2s->capture_dma_data;
++ dma_data->addr = res->start + I2S_REG_RREG;
++ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ dma_data->maxburst = 1;
++ dma_data->slave_id = i2s->rxdma_req;
++}
++
++static int ralink_i2s_dai_probe(struct snd_soc_dai *dai)
++{
++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai);
++
++ snd_soc_dai_init_dma_data(dai, &i2s->playback_dma_data,
++ &i2s->capture_dma_data);
++
++ return 0;
++}
++
++static int ralink_i2s_dai_remove(struct snd_soc_dai *dai)
++{
++ return 0;
++}
++
++static const struct snd_soc_dai_ops ralink_i2s_dai_ops = {
++ .set_sysclk = ralink_i2s_set_sysclk,
++ .set_fmt = ralink_i2s_set_fmt,
++ .startup = ralink_i2s_startup,
++ .shutdown = ralink_i2s_shutdown,
++ .hw_params = ralink_i2s_hw_params,
++ .trigger = ralink_i2s_trigger,
++};
++
++static struct snd_soc_dai_driver ralink_i2s_dai = {
++ .name = DRV_NAME,
++ .probe = ralink_i2s_dai_probe,
++ .remove = ralink_i2s_dai_remove,
++ .ops = &ralink_i2s_dai_ops,
++ .capture = {
++ .stream_name = "I2S Capture",
++ .channels_min = 2,
++ .channels_max = 2,
++ .rate_min = 5512,
++ .rate_max = 192000,
++ .rates = SNDRV_PCM_RATE_CONTINUOUS,
++ .formats = SNDRV_PCM_FMTBIT_S16_LE,
++ },
++ .playback = {
++ .stream_name = "I2S Playback",
++ .channels_min = 2,
++ .channels_max = 2,
++ .rate_min = 5512,
++ .rate_max = 192000,
++ .rates = SNDRV_PCM_RATE_CONTINUOUS,
++ .formats = SNDRV_PCM_FMTBIT_S16_LE,
++ },
++ .symmetric_rates = 1,
++};
++
++static struct snd_pcm_hardware ralink_pcm_hardware = {
++ .info = SNDRV_PCM_INFO_MMAP |
++ SNDRV_PCM_INFO_MMAP_VALID |
++ SNDRV_PCM_INFO_INTERLEAVED |
++ SNDRV_PCM_INFO_BLOCK_TRANSFER,
++ .formats = SNDRV_PCM_FMTBIT_S16_LE,
++ .channels_min = 2,
++ .channels_max = 2,
++ .period_bytes_min = PAGE_SIZE,
++ .period_bytes_max = PAGE_SIZE * 2,
++ .periods_min = 2,
++ .periods_max = 128,
++ .buffer_bytes_max = 128 * 1024,
++ .fifo_size = RALINK_I2S_FIFO_SIZE,
++};
++
++static const struct snd_dmaengine_pcm_config ralink_dmaengine_pcm_config = {
++ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
++ .pcm_hardware = &ralink_pcm_hardware,
++ .prealloc_buffer_size = 256 * PAGE_SIZE,
++};
++
++static const struct snd_soc_component_driver ralink_i2s_component = {
++ .name = DRV_NAME,
++};
++
++static bool ralink_i2s_readable_reg(struct device *dev, unsigned int reg)
++{
++ return true;
++}
++
++static bool ralink_i2s_volatile_reg(struct device *dev, unsigned int reg)
++{
++ switch (reg) {
++ case I2S_REG_INT_STATUS:
++ case I2S_REG_FF_STATUS:
++ return true;
++ }
++ return false;
++}
++
++static bool ralink_i2s_writeable_reg(struct device *dev, unsigned int reg)
++{
++ switch (reg) {
++ case I2S_REG_FF_STATUS:
++ case I2S_REG_RREG:
++ return false;
++ }
++ return true;
++}
++
++static const struct regmap_config ralink_i2s_regmap_config = {
++ .reg_bits = 32,
++ .reg_stride = 4,
++ .val_bits = 32,
++ .writeable_reg = ralink_i2s_writeable_reg,
++ .readable_reg = ralink_i2s_readable_reg,
++ .volatile_reg = ralink_i2s_volatile_reg,
++ .max_register = I2S_REG_DIVINT,
++};
++
++#if (RALINK_I2S_INT_EN)
++static irqreturn_t ralink_i2s_irq(int irq, void *devid)
++{
++ struct ralink_i2s *i2s = devid;
++ u32 status;
++
++ regmap_read(i2s->regmap, I2S_REG_INT_STATUS, &status);
++ if (unlikely(!status))
++ return IRQ_NONE;
++
++ /* tx stats */
++ if (status & I2S_REG_INT_TX_MASK) {
++ if (status & I2S_REG_INT_TX_THRES)
++ i2s->txstats.belowthres++;
++ if (status & I2S_REG_INT_TX_UNRUN)
++ i2s->txstats.underrun++;
++ if (status & I2S_REG_INT_TX_OVRUN)
++ i2s->txstats.overrun++;
++ if (status & I2S_REG_INT_TX_FAULT)
++ i2s->txstats.dmafault++;
++ }
++
++ /* rx stats */
++ if (status & I2S_REG_INT_RX_MASK) {
++ if (status & I2S_REG_INT_RX_THRES)
++ i2s->rxstats.belowthres++;
++ if (status & I2S_REG_INT_RX_UNRUN)
++ i2s->rxstats.underrun++;
++ if (status & I2S_REG_INT_RX_OVRUN)
++ i2s->rxstats.overrun++;
++ if (status & I2S_REG_INT_RX_FAULT)
++ i2s->rxstats.dmafault++;
++ }
++
++ /* clean status bits */
++ regmap_write(i2s->regmap, I2S_REG_INT_STATUS, status);
++
++ return IRQ_HANDLED;
++}
++#endif
++
++#if IS_ENABLED(CONFIG_DEBUG_FS)
++static int ralink_i2s_stats_show(struct seq_file *s, void *unused)
++{
++ struct ralink_i2s *i2s = s->private;
++
++ seq_printf(s, "tx stats\n");
++ seq_printf(s, "\tbelow threshold\t%u\n", i2s->txstats.belowthres);
++ seq_printf(s, "\tunder run\t%u\n", i2s->txstats.underrun);
++ seq_printf(s, "\tover run\t%u\n", i2s->txstats.overrun);
++ seq_printf(s, "\tdma fault\t%u\n", i2s->txstats.dmafault);
++
++ seq_printf(s, "rx stats\n");
++ seq_printf(s, "\tbelow threshold\t%u\n", i2s->rxstats.belowthres);
++ seq_printf(s, "\tunder run\t%u\n", i2s->rxstats.underrun);
++ seq_printf(s, "\tover run\t%u\n", i2s->rxstats.overrun);
++ seq_printf(s, "\tdma fault\t%u\n", i2s->rxstats.dmafault);
++
++ ralink_i2s_dump_regs(i2s);
++
++ return 0;
++}
++
++static int ralink_i2s_stats_open(struct inode *inode, struct file *file)
++{
++ return single_open(file, ralink_i2s_stats_show, inode->i_private);
++}
++
++static const struct file_operations ralink_i2s_stats_ops = {
++ .open = ralink_i2s_stats_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = single_release,
++};
++
++static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s)
++{
++ i2s->dbg_dir = debugfs_create_dir(dev_name(i2s->dev), NULL);
++ if (!i2s->dbg_dir)
++ return -ENOMEM;
++
++ i2s->dbg_stats = debugfs_create_file("stats", S_IRUGO,
++ i2s->dbg_dir, i2s, &ralink_i2s_stats_ops);
++ if (!i2s->dbg_stats) {
++ debugfs_remove(i2s->dbg_dir);
++ return -ENOMEM;
++ }
++
++ return 0;
++}
++
++static inline void ralink_i2s_debugfs_remove(struct ralink_i2s *i2s)
++{
++ debugfs_remove(i2s->dbg_stats);
++ debugfs_remove(i2s->dbg_dir);
++}
++#else
++static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s)
++{
++ return 0;
++}
++
++static inline void ralink_i2s_debugfs_remove(struct fsl_ssi_dbg *ssi_dbg)
++{
++}
++#endif
++
++/*
++ * TODO: these refclk setup functions should use
++ * clock framework instead. hardcode it now.
++ */
++static void rt3350_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data |= (0x1 << 8);
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void rt3883_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0x3 << 13);
++ data |= (0x1 << 13);
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void rt3552_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0xf << 8);
++ data |= (0x3 << 8);
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void mt7620_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0x7 << 9);
++ data |= 0x1 << 9;
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void mt7621_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0x1f << 18);
++ data |= (0x19 << 18);
++ data &= ~(0x1f << 12);
++ data |= (0x1 << 12);
++ data &= ~(0x7 << 9);
++ data |= (0x5 << 9);
++ rt_sysc_w32(data, 0x2c);
++}
++
++static void mt7628_refclk_setup(void)
++{
++ uint32_t data;
++
++ /* set i2s and refclk digital pad */
++ data = rt_sysc_r32(0x3c);
++ data |= 0x1f;
++ rt_sysc_w32(data, 0x3c);
++
++ /* Adjust REFCLK0's driving strength */
++ data = rt_sysc_r32(0x1354);
++ data &= ~(0x1 << 5);
++ rt_sysc_w32(data, 0x1354);
++ data = rt_sysc_r32(0x1364);
++ data |= ~(0x1 << 5);
++ rt_sysc_w32(data, 0x1364);
++
++ /* set refclk output 12Mhz clock */
++ data = rt_sysc_r32(0x2c);
++ data &= ~(0x7 << 9);
++ data |= 0x1 << 9;
++ rt_sysc_w32(data, 0x2c);
++}
++
++struct rt_i2s_data {
++ u32 flags;
++ void (*refclk_setup)(void);
++};
++
++struct rt_i2s_data rt3050_i2s_data = { .flags = RALINK_FLAGS_TXONLY };
++struct rt_i2s_data rt3350_i2s_data = { .flags = RALINK_FLAGS_TXONLY,
++ .refclk_setup = rt3350_refclk_setup };
++struct rt_i2s_data rt3883_i2s_data = {
++ .flags = (RALINK_FLAGS_LEFT_J | RALINK_FLAGS_RIGHT_J),
++ .refclk_setup = rt3883_refclk_setup };
++struct rt_i2s_data rt3352_i2s_data = { .refclk_setup = rt3552_refclk_setup};
++struct rt_i2s_data mt7620_i2s_data = { .refclk_setup = mt7620_refclk_setup};
++struct rt_i2s_data mt7621_i2s_data = { .refclk_setup = mt7621_refclk_setup};
++struct rt_i2s_data mt7628_i2s_data = {
++ .flags = (RALINK_FLAGS_ENDIAN | RALINK_FLAGS_24BIT |
++ RALINK_FLAGS_LEFT_J),
++ .refclk_setup = mt7628_refclk_setup};
++
++static const struct of_device_id ralink_i2s_match_table[] = {
++ { .compatible = "ralink,rt3050-i2s",
++ .data = (void *)&rt3050_i2s_data },
++ { .compatible = "ralink,rt3350-i2s",
++ .data = (void *)&rt3350_i2s_data },
++ { .compatible = "ralink,rt3883-i2s",
++ .data = (void *)&rt3883_i2s_data },
++ { .compatible = "ralink,rt3352-i2s",
++ .data = (void *)&rt3352_i2s_data },
++ { .compatible = "mediatek,mt7620-i2s",
++ .data = (void *)&mt7620_i2s_data },
++ { .compatible = "mediatek,mt7621-i2s",
++ .data = (void *)&mt7621_i2s_data },
++ { .compatible = "mediatek,mt7628-i2s",
++ .data = (void *)&mt7628_i2s_data },
++};
++MODULE_DEVICE_TABLE(of, ralink_i2s_match_table);
++
++static int ralink_i2s_probe(struct platform_device *pdev)
++{
++ const struct of_device_id *match;
++ struct device_node *np = pdev->dev.of_node;
++ struct ralink_i2s *i2s;
++ struct resource *res;
++ int irq, ret;
++ u32 dma_req;
++ struct rt_i2s_data *data;
++
++ i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL);
++ if (!i2s)
++ return -ENOMEM;
++
++ platform_set_drvdata(pdev, i2s);
++ i2s->dev = &pdev->dev;
++
++ match = of_match_device(ralink_i2s_match_table, &pdev->dev);
++ if (!match)
++ return -EINVAL;
++ data = (struct rt_i2s_data *)match->data;
++ i2s->flags = data->flags;
++ /* setup out 12Mhz refclk to codec as mclk */
++ if (data->refclk_setup)
++ data->refclk_setup();
++
++ if (of_property_read_u32(np, "txdma-req", &dma_req)) {
++ dev_err(&pdev->dev, "no txdma-req define\n");
++ return -EINVAL;
++ }
++ i2s->txdma_req = (u16)dma_req;
++ if (!(i2s->flags & RALINK_FLAGS_TXONLY)) {
++ if (of_property_read_u32(np, "rxdma-req", &dma_req)) {
++ dev_err(&pdev->dev, "no rxdma-req define\n");
++ return -EINVAL;
++ }
++ i2s->rxdma_req = (u16)dma_req;
++ }
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ i2s->regs = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(i2s->regs))
++ return PTR_ERR(i2s->regs);
++
++ i2s->regmap = devm_regmap_init_mmio(&pdev->dev, i2s->regs,
++ &ralink_i2s_regmap_config);
++ if (IS_ERR(i2s->regmap)) {
++ dev_err(&pdev->dev, "regmap init failed\n");
++ return PTR_ERR(i2s->regmap);
++ }
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0) {
++ dev_err(&pdev->dev, "failed to get irq\n");
++ return -EINVAL;
++ }
++
++#if (RALINK_I2S_INT_EN)
++ ret = devm_request_irq(&pdev->dev, irq, ralink_i2s_irq,
++ 0, dev_name(&pdev->dev), i2s);
++ if (ret) {
++ dev_err(&pdev->dev, "failed to request irq\n");
++ return ret;
++ }
++#endif
++
++ i2s->clk = devm_clk_get(&pdev->dev, NULL);
++ if (IS_ERR(i2s->clk)) {
++ dev_err(&pdev->dev, "no clock defined\n");
++ return PTR_ERR(i2s->clk);
++ }
++
++ ret = clk_prepare_enable(i2s->clk);
++ if (ret)
++ return ret;
++
++ ralink_i2s_init_dma_data(i2s, res);
++
++ device_reset(&pdev->dev);
++
++ ret = ralink_i2s_debugfs_create(i2s);
++ if (ret) {
++ dev_err(&pdev->dev, "create debugfs failed\n");
++ goto err_clk_disable;
++ }
++
++ /* enable 24bits support */
++ if (i2s->flags & RALINK_FLAGS_24BIT) {
++ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S24_LE;
++ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S24_LE;
++ }
++
++ /* enable big endian support */
++ if (i2s->flags & RALINK_FLAGS_ENDIAN) {
++ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S16_BE;
++ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S16_BE;
++ ralink_pcm_hardware.formats |= SNDRV_PCM_FMTBIT_S16_BE;
++ if (i2s->flags & RALINK_FLAGS_24BIT) {
++ ralink_i2s_dai.capture.formats |=
++ SNDRV_PCM_FMTBIT_S24_BE;
++ ralink_i2s_dai.playback.formats |=
++ SNDRV_PCM_FMTBIT_S24_BE;
++ ralink_pcm_hardware.formats |=
++ SNDRV_PCM_FMTBIT_S24_BE;
++ }
++ }
++
++ /* disable capture support */
++ if (i2s->flags & RALINK_FLAGS_TXONLY)
++ memset(&ralink_i2s_dai.capture, sizeof(ralink_i2s_dai.capture),
++ 0);
++
++ ret = devm_snd_soc_register_component(&pdev->dev, &ralink_i2s_component,
++ &ralink_i2s_dai, 1);
++ if (ret)
++ goto err_debugfs;
++
++ ret = devm_snd_dmaengine_pcm_register(&pdev->dev,
++ &ralink_dmaengine_pcm_config,
++ SND_DMAENGINE_PCM_FLAG_COMPAT);
++ if (ret)
++ goto err_debugfs;
++
++ dev_info(i2s->dev, "mclk %luMHz\n", clk_get_rate(i2s->clk) / 1000000);
++
++ return 0;
++
++err_debugfs:
++ ralink_i2s_debugfs_remove(i2s);
++
++err_clk_disable:
++ clk_disable_unprepare(i2s->clk);
++
++ return ret;
++}
++
++static int ralink_i2s_remove(struct platform_device *pdev)
++{
++ struct ralink_i2s *i2s = platform_get_drvdata(pdev);
++
++ ralink_i2s_debugfs_remove(i2s);
++ clk_disable_unprepare(i2s->clk);
++
++ return 0;
++}
++
++static struct platform_driver ralink_i2s_driver = {
++ .probe = ralink_i2s_probe,
++ .remove = ralink_i2s_remove,
++ .driver = {
++ .name = DRV_NAME,
++ .of_match_table = ralink_i2s_match_table,
++ },
++};
++module_platform_driver(ralink_i2s_driver);
++
++MODULE_AUTHOR("Lars-Peter Clausen, <lars@metafoo.de>");
++MODULE_DESCRIPTION("Ralink/MediaTek I2S driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:" DRV_NAME);
--- /dev/null
+From a7eb46e0ea4a11e4dfb56ab129bf816d1059a6c5 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:31:08 +0100
+Subject: [PATCH 51/53] serial: add ugly custom baud rate hack
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/tty/serial/serial_core.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/tty/serial/serial_core.c
++++ b/drivers/tty/serial/serial_core.c
+@@ -418,6 +418,9 @@ uart_get_baud_rate(struct uart_port *por
+ break;
+ }
+
++ if (tty_termios_baud_rate(termios) == 2500000)
++ return 250000;
++
+ for (try = 0; try < 2; try++) {
+ baud = tty_termios_baud_rate(termios);
+
--- /dev/null
+From fc8f96309c21c1bc3276427309cd7d361347d66e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:16:50 +0100
+Subject: [PATCH 52/53] pwm: add mediatek support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pwm/Kconfig | 9 +++
+ drivers/pwm/Makefile | 1 +
+ drivers/pwm/pwm-mediatek.c | 173 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 183 insertions(+)
+ create mode 100644 drivers/pwm/pwm-mediatek.c
+
+--- a/drivers/pwm/Kconfig
++++ b/drivers/pwm/Kconfig
+@@ -339,6 +339,15 @@ config PWM_MEDIATEK
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-mediatek.
+
++config PWM_MEDIATEK_RAMIPS
++ tristate "Mediatek PWM support"
++ depends on RALINK && OF
++ help
++ Generic PWM framework driver for Mediatek ARM SoC.
++
++ To compile this driver as a module, choose M here: the module
++ will be called pwm-mxs.
++
+ config PWM_MXS
+ tristate "Freescale MXS PWM support"
+ depends on OF
+--- a/drivers/pwm/Makefile
++++ b/drivers/pwm/Makefile
+@@ -30,6 +30,7 @@ obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-p
+ obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
+ obj-$(CONFIG_PWM_MESON) += pwm-meson.o
+ obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o
++obj-$(CONFIG_PWM_MEDIATEK_RAMIPS) += pwm-mediatek-ramips.o
+ obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
+ obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
+ obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
+--- /dev/null
++++ b/drivers/pwm/pwm-mediatek-ramips.c
+@@ -0,0 +1,173 @@
++/*
++ * Mediatek Pulse Width Modulator driver
++ *
++ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/ioport.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/pwm.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++
++#define NUM_PWM 4
++
++/* PWM registers and bits definitions */
++#define PWMCON 0x00
++#define PWMHDUR 0x04
++#define PWMLDUR 0x08
++#define PWMGDUR 0x0c
++#define PWMWAVENUM 0x28
++#define PWMDWIDTH 0x2c
++#define PWMTHRES 0x30
++
++/**
++ * struct mtk_pwm_chip - struct representing pwm chip
++ *
++ * @mmio_base: base address of pwm chip
++ * @chip: linux pwm chip representation
++ */
++struct mtk_pwm_chip {
++ void __iomem *mmio_base;
++ struct pwm_chip chip;
++};
++
++static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
++{
++ return container_of(chip, struct mtk_pwm_chip, chip);
++}
++
++static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
++ unsigned long offset)
++{
++ return ioread32(chip->mmio_base + 0x10 + (num * 0x40) + offset);
++}
++
++static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
++ unsigned int num, unsigned long offset,
++ unsigned long val)
++{
++ iowrite32(val, chip->mmio_base + 0x10 + (num * 0x40) + offset);
++}
++
++static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
++ int duty_ns, int period_ns)
++{
++ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
++ u32 resolution = 100 / 4;
++ u32 clkdiv = 0;
++
++ while (period_ns / resolution > 8191) {
++ clkdiv++;
++ resolution *= 2;
++ }
++
++ if (clkdiv > 7)
++ return -1;
++
++ mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv);
++ mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
++ mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution);
++ return 0;
++}
++
++static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
++{
++ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
++ u32 val;
++
++ val = ioread32(pc->mmio_base);
++ val |= BIT(pwm->hwpwm);
++ iowrite32(val, pc->mmio_base);
++
++ return 0;
++}
++
++static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
++{
++ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
++ u32 val;
++
++ val = ioread32(pc->mmio_base);
++ val &= ~BIT(pwm->hwpwm);
++ iowrite32(val, pc->mmio_base);
++}
++
++static const struct pwm_ops mtk_pwm_ops = {
++ .config = mtk_pwm_config,
++ .enable = mtk_pwm_enable,
++ .disable = mtk_pwm_disable,
++ .owner = THIS_MODULE,
++};
++
++static int mtk_pwm_probe(struct platform_device *pdev)
++{
++ struct mtk_pwm_chip *pc;
++ struct resource *r;
++ int ret;
++
++ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
++ if (!pc)
++ return -ENOMEM;
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
++ if (IS_ERR(pc->mmio_base))
++ return PTR_ERR(pc->mmio_base);
++
++ platform_set_drvdata(pdev, pc);
++
++ pc->chip.dev = &pdev->dev;
++ pc->chip.ops = &mtk_pwm_ops;
++ pc->chip.base = -1;
++ pc->chip.npwm = NUM_PWM;
++
++ ret = pwmchip_add(&pc->chip);
++ if (ret < 0)
++ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
++
++ return ret;
++}
++
++static int mtk_pwm_remove(struct platform_device *pdev)
++{
++ struct mtk_pwm_chip *pc = platform_get_drvdata(pdev);
++ int i;
++
++ for (i = 0; i < NUM_PWM; i++)
++ pwm_disable(&pc->chip.pwms[i]);
++
++ return pwmchip_remove(&pc->chip);
++}
++
++static const struct of_device_id mtk_pwm_of_match[] = {
++ { .compatible = "mediatek,mt7628-pwm" },
++ { }
++};
++
++MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);
++
++static struct platform_driver mtk_pwm_driver = {
++ .driver = {
++ .name = "mtk-pwm",
++ .owner = THIS_MODULE,
++ .of_match_table = mtk_pwm_of_match,
++ },
++ .probe = mtk_pwm_probe,
++ .remove = mtk_pwm_remove,
++};
++
++module_platform_driver(mtk_pwm_driver);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_ALIAS("platform:mtk-pwm");
--- /dev/null
+--- a/drivers/usb/dwc2/platform.c
++++ b/drivers/usb/dwc2/platform.c
+@@ -477,6 +477,12 @@ static int dwc2_driver_probe(struct plat
+ if (retval)
+ return retval;
+
++ /* Enable USB port before any regs access */
++ if (readl(hsotg->regs + PCGCTL) & 0x0f) {
++ writel(0x00, hsotg->regs + PCGCTL);
++ /* TODO: mdelay(25) here? vendor driver don't use it */
++ }
++
+ hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
+
+ retval = dwc2_get_dr_mode(hsotg);
--- /dev/null
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -50,6 +50,7 @@ obj-$(CONFIG_GENWQE) += genwqe/
+ obj-$(CONFIG_ECHO) += echo/
+ obj-$(CONFIG_CXL_BASE) += cxl/
+ obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
++obj-$(CONFIG_SOC_MT7620) += linkit.o
+ obj-$(CONFIG_OCXL) += ocxl/
+ obj-y += cardreader/
+ obj-$(CONFIG_PVPANIC) += pvpanic.o
+--- /dev/null
++++ b/drivers/misc/linkit.c
+@@ -0,0 +1,84 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * publishhed by the Free Software Foundation.
++ *
++ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/of.h>
++#include <linux/mtd/mtd.h>
++#include <linux/gpio.h>
++
++#define LINKIT_LATCH_GPIO 11
++
++struct linkit_hw_data {
++ char board[16];
++ char rev[16];
++};
++
++static void sanify_string(char *s)
++{
++ int i;
++
++ for (i = 0; i < 15; i++)
++ if (s[i] <= 0x20)
++ s[i] = '\0';
++ s[15] = '\0';
++}
++
++static int linkit_probe(struct platform_device *pdev)
++{
++ struct linkit_hw_data hw;
++ struct mtd_info *mtd;
++ size_t retlen;
++ int ret;
++
++ mtd = get_mtd_device_nm("factory");
++ if (IS_ERR(mtd))
++ return PTR_ERR(mtd);
++
++ ret = mtd_read(mtd, 0x400, sizeof(hw), &retlen, (u_char *) &hw);
++ put_mtd_device(mtd);
++
++ sanify_string(hw.board);
++ sanify_string(hw.rev);
++
++ dev_info(&pdev->dev, "Version : %s\n", hw.board);
++ dev_info(&pdev->dev, "Revision : %s\n", hw.rev);
++
++ if (!strcmp(hw.board, "LINKITS7688")) {
++ dev_info(&pdev->dev, "setting up bootstrap latch\n");
++
++ if (devm_gpio_request(&pdev->dev, LINKIT_LATCH_GPIO, "bootstrap")) {
++ dev_err(&pdev->dev, "failed to setup bootstrap gpio\n");
++ return -1;
++ }
++ gpio_direction_output(LINKIT_LATCH_GPIO, 0);
++ }
++
++ return 0;
++}
++
++static const struct of_device_id linkit_match[] = {
++ { .compatible = "mediatek,linkit" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, linkit_match);
++
++static struct platform_driver linkit_driver = {
++ .probe = linkit_probe,
++ .driver = {
++ .name = "mtk-linkit",
++ .owner = THIS_MODULE,
++ .of_match_table = linkit_match,
++ },
++};
++
++int __init linkit_init(void)
++{
++ return platform_driver_register(&linkit_driver);
++}
++late_initcall_sync(linkit_init);
--- /dev/null
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_DIEI=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_RT2880_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_LIB_ASHLDI3=y
+CONFIG_GENERIC_LIB_ASHRDI3=y
+CONFIG_GENERIC_LIB_CMPDI2=y
+CONFIG_GENERIC_LIB_LSHRDI3=y
+CONFIG_GENERIC_LIB_UCMPDI2=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_RALINK=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HZ=250
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IP17XX_PHY=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+# CONFIG_KERNEL_ZSTD is not set
+CONFIG_LIBFDT=y
+CONFIG_LLD_VERSION=0
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MIGRATION=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CBPF_JIT=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+CONFIG_MIPS_L1_CACHE_SHIFT_4=y
+CONFIG_MIPS_LD_CAN_LINK_VDSO=y
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_MIPS_SPRAM=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_LZMA_FW=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MTD_SPLIT_WRGG_FW=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NET_RALINK_MDIO_RT2880=y
+CONFIG_NET_RALINK_RT2880=y
+CONFIG_NET_RALINK_SOC=y
+CONFIG_NET_VENDOR_RALINK=y
+CONFIG_NLS=m
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
+# CONFIG_PCI_MT7621 is not set
+# CONFIG_PCI_MT7621_PHY is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+# CONFIG_PHY_RALINK_USB is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RT2880=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_RALINK=y
+CONFIG_RALINK_WDT=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SOC_MT7620 is not set
+# CONFIG_SOC_MT7621 is not set
+CONFIG_SOC_RT288X=y
+# CONFIG_SOC_RT305X is not set
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+# CONFIG_SPI_MT7621 is not set
+CONFIG_SPI_RT2880=y
+CONFIG_SRCU=y
+CONFIG_SWCONFIG=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_TARGET_ISA_REV=2
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB=m
+CONFIG_USB_COMMON=m
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_HCD_PLATFORM=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PLATFORM=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
--- /dev/null
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_SYSTICK_QUIRK=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKEVT_RT3352=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_DIEI=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CSRC_R4K=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_RT305X_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_LIB_ASHLDI3=y
+CONFIG_GENERIC_LIB_ASHRDI3=y
+CONFIG_GENERIC_LIB_CMPDI2=y
+CONFIG_GENERIC_LIB_LSHRDI3=y
+CONFIG_GENERIC_LIB_UCMPDI2=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_RALINK=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HZ=250
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+# CONFIG_KERNEL_ZSTD is not set
+CONFIG_LIBFDT=y
+CONFIG_LLD_VERSION=0
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGRATION=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CBPF_JIT=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_LD_CAN_LINK_VDSO=y
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_MIPS_SPRAM=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
+CONFIG_MTD_SPLIT_JIMAGE_FW=y
+CONFIG_MTD_SPLIT_SEAMA_FW=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK_ESW_RT3050=y
+CONFIG_NET_RALINK_RT3050=y
+CONFIG_NET_RALINK_SOC=y
+CONFIG_NET_VENDOR_RALINK=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_PCI_DRIVERS_LEGACY=y
+# CONFIG_PCI_MT7621 is not set
+# CONFIG_PCI_MT7621_PHY is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHY_RALINK_USB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RT2880=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_RALINK=y
+# CONFIG_RALINK_ILL_ACC is not set
+CONFIG_RALINK_WDT=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SOC_MT7620 is not set
+# CONFIG_SOC_MT7621 is not set
+# CONFIG_SOC_RT288X is not set
+CONFIG_SOC_RT305X=y
+# CONFIG_SOC_RT3883 is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+# CONFIG_SPI_MT7621 is not set
+CONFIG_SPI_RT2880=y
+CONFIG_SRCU=y
+CONFIG_SWCONFIG=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_TARGET_ISA_REV=2
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
--- /dev/null
+CONFIG_AR8216_PHY=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_DIEI=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CSRC_R4K=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DTB_RT3883_EVAL is not set
+CONFIG_DTB_RT_NONE=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_LIB_ASHLDI3=y
+CONFIG_GENERIC_LIB_ASHRDI3=y
+CONFIG_GENERIC_LIB_CMPDI2=y
+CONFIG_GENERIC_LIB_LSHRDI3=y
+CONFIG_GENERIC_LIB_UCMPDI2=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_RALINK=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HZ=250
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_INTC=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+# CONFIG_KERNEL_ZSTD is not set
+CONFIG_LIBFDT=y
+CONFIG_LLD_VERSION=0
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGRATION=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CBPF_JIT=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_LD_CAN_LINK_VDSO=y
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_MIPS_SPRAM=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
+CONFIG_MTD_SPLIT_SEAMA_FW=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_RALINK_MDIO=y
+CONFIG_NET_RALINK_MDIO_RT2880=y
+CONFIG_NET_RALINK_RT3883=y
+CONFIG_NET_RALINK_SOC=y
+CONFIG_NET_VENDOR_RALINK=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
+# CONFIG_PCI_MT7621 is not set
+# CONFIG_PCI_MT7621_PHY is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHY_RALINK_USB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RT2880=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_RALINK=y
+CONFIG_RALINK_WDT=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367B_PHY=y
+CONFIG_RTL8367_PHY=y
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SOC_MT7620 is not set
+# CONFIG_SOC_MT7621 is not set
+# CONFIG_SOC_RT288X is not set
+# CONFIG_SOC_RT305X is not set
+CONFIG_SOC_RT3883=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+# CONFIG_SPI_MT7621 is not set
+CONFIG_SPI_RT2880=y
+CONFIG_SRCU=y
+CONFIG_SWCONFIG=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_TARGET_ISA_REV=2
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
projects / openwrt / staging / rmilecki.git / commitdiff