--- /dev/null
+/*
+ * TP-Link Archer C25 v1 board support
+ *
+ * Copyright (C) 2017 Ludwig Thomeczek <ledesrc@wxorx.net>
+ * based on mach-archer-c60/C59-v1.c
+ * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/gpio.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/74x164.h>
+
+#define ARCHER_C25_GPIO_SHIFT_OE 21 /* OE, Output Enable */
+#define ARCHER_C25_GPIO_SHIFT_SER 14 /* DS, Data Serial Input */
+#define ARCHER_C25_GPIO_SHIFT_SRCLK 15 /* SHCP, Shift Reg Clock Input */
+#define ARCHER_C25_GPIO_SHIFT_SRCLR 19 /* MR, Master Reset */
+#define ARCHER_C25_GPIO_SHIFT_RCLK 16 /* STCP, Storage Reg Clock Input */
+
+#define ARCHER_C25_74HC_GPIO_BASE QCA956X_GPIO_COUNT
+#define ARCHER_C25_74HC_GPIO_LED_WAN_AMBER 27
+#define ARCHER_C25_74HC_GPIO_LED_WAN_GREEN 28
+#define ARCHER_C25_74HC_GPIO_LED_WLAN2 29
+#define ARCHER_C25_74HC_GPIO_LED_WLAN5 30
+#define ARCHER_C25_74HC_GPIO_LED_LAN1 23
+#define ARCHER_C25_74HC_GPIO_LED_LAN2 24
+#define ARCHER_C25_74HC_GPIO_LED_LAN3 25
+#define ARCHER_C25_74HC_GPIO_LED_LAN4 26
+
+#define ARCHER_C25_V1_SSR_BIT_0 0
+#define ARCHER_C25_V1_SSR_BIT_1 1
+#define ARCHER_C25_V1_SSR_BIT_2 2
+#define ARCHER_C25_V1_SSR_BIT_3 3
+#define ARCHER_C25_V1_SSR_BIT_4 4
+#define ARCHER_C25_V1_SSR_BIT_5 5
+#define ARCHER_C25_V1_SSR_BIT_6 6
+#define ARCHER_C25_V1_SSR_BIT_7 7
+
+
+#define ARCHER_C25_V1_KEYS_POLL_INTERVAL 20
+#define ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL \
+ (3 * ARCHER_C25_V1_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C25_V1_GPIO_BTN_RESET 1
+#define ARCHER_C25_V1_GPIO_BTN_RFKILL 22
+
+#define ARCHER_C25_V1_GPIO_LED_POWER 17
+#define ARCHER_C25_V1_GPIO_LED_WPS 2
+
+#define ARCHER_C25_V1_WMAC_CALDATA_OFFSET 0x1000
+
+static struct spi_gpio_platform_data archer_c25_v1_spi_data = {
+ .sck = ARCHER_C25_GPIO_SHIFT_SRCLK,
+ .miso = SPI_GPIO_NO_MISO,
+ .mosi = ARCHER_C25_GPIO_SHIFT_SER,
+ .num_chipselect = 1,
+};
+
+static u8 archer_c25_v1_ssr_initdata[] __initdata = {
+ BIT(ARCHER_C25_V1_SSR_BIT_7) |
+ BIT(ARCHER_C25_V1_SSR_BIT_6) |
+ BIT(ARCHER_C25_V1_SSR_BIT_5) |
+ BIT(ARCHER_C25_V1_SSR_BIT_4) |
+ BIT(ARCHER_C25_V1_SSR_BIT_3) |
+ BIT(ARCHER_C25_V1_SSR_BIT_2) |
+ BIT(ARCHER_C25_V1_SSR_BIT_1)
+};
+
+static struct gen_74x164_chip_platform_data archer_c25_v1_ssr_data = {
+ .base = ARCHER_C25_74HC_GPIO_BASE,
+ .num_registers = ARRAY_SIZE(archer_c25_v1_ssr_initdata),
+ .init_data = archer_c25_v1_ssr_initdata,
+};
+
+static struct platform_device archer_c25_v1_spi_device = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &archer_c25_v1_spi_data,
+ },
+};
+
+static struct spi_board_info archer_c25_v1_spi_info[] = {
+ {
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 10000000,
+ .modalias = "74x164",
+ .platform_data = &archer_c25_v1_ssr_data,
+ .controller_data = (void *) ARCHER_C25_GPIO_SHIFT_RCLK,
+ },
+};
+
+static struct gpio_led archer_c25_v1_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c25-v1:green:power",
+ .gpio = ARCHER_C25_V1_GPIO_LED_POWER,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wps",
+ .gpio = ARCHER_C25_V1_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wlan2g",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN2,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wlan5g",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN5,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan1",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan2",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan3",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan4",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wan",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:amber:wan",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button archer_c25_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C25_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C25_V1_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+};
+
+static void __init archer_c25_v1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0008);
+ u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
+
+ ath79_register_m25p80(NULL);
+
+ spi_register_board_info(archer_c25_v1_spi_info,
+ ARRAY_SIZE(archer_c25_v1_spi_info));
+
+ platform_device_register(&archer_c25_v1_spi_device);
+
+ gpio_request_one(ARCHER_C25_GPIO_SHIFT_OE,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+ "LED control");
+
+ gpio_request_one(ARCHER_C25_GPIO_SHIFT_SRCLR,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "LED reset");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c25_v1_leds_gpio),
+ archer_c25_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ARCHER_C25_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(archer_c25_v1_gpio_keys),
+ archer_c25_v1_gpio_keys);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ /* WAN port */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_register_eth(0);
+
+ /* LAN ports */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art + ARCHER_C25_V1_WMAC_CALDATA_OFFSET, mac);
+ ap91_pci_init(NULL, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C25_V1, "ARCHER-C25-V1", "TP-LINK Archer C25 v1",
+ archer_c25_v1_setup);
projects / openwrt / staging / kaloz.git / commitdiff