--- /dev/null
+/*
+ * Zcomax ZCN-1523H-2-8/5-16 board support
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+#define ZCN_1523H_GPIO_BTN_RESET 0
+#define ZCN_1523H_GPIO_LED_INIT 11
+#define ZCN_1523H_GPIO_LED_LAN1 17
+
+#define ZCN_1523H_2_GPIO_LED_WEAK 13
+#define ZCN_1523H_2_GPIO_LED_MEDIUM 14
+#define ZCN_1523H_2_GPIO_LED_STRONG 15
+
+#define ZCN_1523H_5_GPIO_LED_UNKNOWN 1
+#define ZCN_1523H_5_GPIO_LED_LAN2 13
+#define ZCN_1523H_5_GPIO_LED_WEAK 14
+#define ZCN_1523H_5_GPIO_LED_MEDIUM 15
+#define ZCN_1523H_5_GPIO_LED_STRONG 16
+
+#define ZCN_1523H_BUTTONS_POLL_INTERVAL 20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition zcn_1523h_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "u-boot-env",
+ .offset = 0x040000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "rootfs",
+ .offset = 0x050000,
+ .size = 0x610000,
+ } , {
+ .name = "kernel",
+ .offset = 0x660000,
+ .size = 0x170000,
+ } , {
+ .name = "configure",
+ .offset = 0x7d0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "mfg",
+ .offset = 0x7e0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "eeprom",
+ .offset = 0x7f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "firmware",
+ .offset = 0x050000,
+ .size = 0x780000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data zcn_1523h_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .parts = zcn_1523h_partitions,
+ .nr_parts = ARRAY_SIZE(zcn_1523h_partitions),
+#endif
+};
+
+static struct gpio_button zcn_1523h_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 3,
+ .gpio = ZCN_1523H_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led zcn_1523h_leds_gpio[] __initdata = {
+ {
+ .name = "zcn-1523h:amber:init",
+ .gpio = ZCN_1523H_GPIO_LED_INIT,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:lan1",
+ .gpio = ZCN_1523H_GPIO_LED_LAN1,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = {
+ {
+ .name = "zcn-1523h:red:weak",
+ .gpio = ZCN_1523H_2_GPIO_LED_WEAK,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:amber:medium",
+ .gpio = ZCN_1523H_2_GPIO_LED_MEDIUM,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:strong",
+ .gpio = ZCN_1523H_2_GPIO_LED_STRONG,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = {
+ {
+ .name = "zcn-1523h:red:weak",
+ .gpio = ZCN_1523H_5_GPIO_LED_WEAK,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:amber:medium",
+ .gpio = ZCN_1523H_5_GPIO_LED_MEDIUM,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:strong",
+ .gpio = ZCN_1523H_5_GPIO_LED_STRONG,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:lan2",
+ .gpio = ZCN_1523H_5_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:amber:unknown",
+ .gpio = ZCN_1523H_5_GPIO_LED_UNKNOWN,
+ }
+};
+
+static void __init zcn_1523h_generic_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ar71xx_add_device_m25p80(&zcn_1523h_flash_data);
+
+ ar71xx_add_device_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio),
+ zcn_1523h_leds_gpio);
+
+ ar71xx_add_device_gpio_buttons(-1, ZCN_1523H_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(zcn_1523h_gpio_buttons),
+ zcn_1523h_gpio_buttons);
+
+ ap91_pci_init(ee, mac);
+
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
+
+ /* LAN1 port */
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth0_data.speed = SPEED_100;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+ /* LAN2 port */
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth1_data.speed = SPEED_1000;
+ ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+ ar71xx_add_device_mdio(0x0);
+ ar71xx_add_device_eth(0);
+}
+
+static void __init zcn_1523h_2_setup(void)
+{
+ zcn_1523h_generic_setup();
+
+ ar71xx_add_device_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio),
+ zcn_1523h_2_leds_gpio);
+}
+
+MIPS_MACHINE(AR71XX_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2",
+ zcn_1523h_2_setup);
+
+static void __init zcn_1523h_5_setup(void)
+{
+ zcn_1523h_generic_setup();
+
+ ar71xx_add_device_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio),
+ zcn_1523h_5_leds_gpio);
+ ar71xx_add_device_eth(1);
+}
+
+MIPS_MACHINE(AR71XX_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5",
+ zcn_1523h_5_setup);
projects / openwrt / staging / zorun.git / commitdiff