--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ compatible = "skspruce,wia3300-20", "qcom,ipq4019";
+ model = "SKSpruce WIA3300-20";
+
+ aliases {
+ label-mac-device = &gmac;
+ led-boot = &led_status_red;
+ led-failsafe = &led_status_lime;
+ led-running = &led_status_lime;
+ led-upgrade = &led_status_red;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&key_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_status_red: led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_lime: led-1 {
+ color = <LED_COLOR_ID_LIME>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_LIME>;
+ function = LED_FUNCTION_WLAN_2GHZ;
+ gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led-3 {
+ color = <LED_COLOR_ID_LIME>;
+ function = LED_FUNCTION_WLAN_5GHZ;
+ gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ output-usb-power {
+ compatible = "regulator-output";
+ vout-supply = <®_usb>;
+ };
+
+ reg_usb: regulator-usb {
+ compatible = "regulator-fixed";
+
+ pinctrl-0 = <®_usb_pins>;
+ pinctrl-names = "default";
+
+ enable-active-high;
+ gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "reg_usb";
+ regulator-boot-on;
+ };
+
+ soc {
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ status = "okay";
+
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <24000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "0:MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "0:QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "0:CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+
+ partition@d0000 {
+ label = "0:DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ compatible = "u-boot,env";
+ label = "0:APPSBLENV";
+ reg = <0x000e0000 0x00010000>;
+ };
+
+ partition@f0000 {
+ label = "0:APPSBL";
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+
+ partition@170000 {
+ label = "0:oldART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "0:HLOS";
+ reg = <0x00180000 0x00800000>;
+ read-only;
+ };
+
+ partition@980000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x980000 0x35d0000>;
+ };
+
+ partition@3f50000 {
+ label = "0:APPSBL1";
+ reg = <0x03f50000 0x00080000>;
+ read-only;
+ };
+
+ partition@3fd0000 {
+ label = "BoardInfo";
+ reg = <0x03fd0000 0x00010000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_boardinfo_108a: macaddr@108a {
+ compatible = "mac-base";
+ reg = <0x108a 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+
+ partition@3fe0000 {
+ label = "RebootCause";
+ reg = <0x03fe0000 0x00010000>;
+ read-only;
+ };
+
+ partition@3ff0000 {
+ label = "0:ART";
+ reg = <0x03ff0000 0x00010000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_art_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_art_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-0 = <&serial0_pins>;
+ pinctrl-names = "default";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+ðphy3 {
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_LIME>;
+ function = LED_FUNCTION_LAN;
+ };
+ };
+};
+
+ðphy4 {
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_LIME>;
+ function = LED_FUNCTION_WAN;
+ };
+ };
+};
+
+&gmac {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_boardinfo_108a 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ reset-delay-us = <2000>;
+ reset-post-delay-us = <2000>;
+ reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+};
+
+&prng {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "ETH2";
+ nvmem-cells = <&macaddr_boardinfo_108a 1>;
+ nvmem-cell-names = "mac-address";
+};
+
+&swport5 {
+ status = "okay";
+
+ label = "ETH1";
+ nvmem-cells = <&macaddr_boardinfo_108a 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&tlmm {
+ key_pins: key_pinmux {
+ gpio {
+ pins = "gpio18";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ led_pins: led_pinmux {
+ gpio {
+ pins = "gpio8", "gpio9", "gpio11", "gpio28";
+ function = "gpio";
+ drive-strength = <8>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ mdio_pins: mdio_pinmux {
+ gpio {
+ pins = "gpio43";
+ function = "gpio";
+ drive-strength = <4>;
+ bias-disable;
+ output-high;
+ };
+
+ mdc {
+ pins = "gpio7";
+ function = "mdc";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ mdio {
+ pins = "gpio6";
+ function = "mdio";
+ drive-strength = <4>;
+ drive-open-drain;
+ bias-pull-up;
+ };
+ };
+
+ reg_usb_pins: reg_usb_pinmux {
+ gpio {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ serial0_pins: serial0_pinmux {
+ blsp_uart0 {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ spi0_pins: spi0_pinmux {
+ blsp_spi0 {
+ pins = "gpio13", "gpio14", "gpio15";
+ function = "blsp_spi0";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ gpio {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <4>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ nvmem-cells = <&macaddr_boardinfo_108a 3>, <&precal_art_1000>;
+ qcom,ath10k-calibration-variant = "SKSpruce_WIA3300-20";
+};
+
+&wifi1 {
+ status = "okay";
+
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ nvmem-cells = <&macaddr_boardinfo_108a 4>, <&precal_art_5000>;
+ qcom,ath10k-calibration-variant = "SKSpruce_WIA3300-20";
+};
projects / openwrt / openwrt.git / commitdiff