--- /dev/null
+--- /dev/null
++++ b/board/arcadyan/arv7506pw11/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/arcadyan/arv7506pw11/arv7506pw11.c
+@@ -0,0 +1,97 @@
++/*
++ * Copyright (C) 2016 Mathias Kresin <dev@kresin.me>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++#if defined(CONFIG_SYS_BOOT_RAM)
++#define do_gpio_init 1
++#elif defined(CONFIG_SYS_BOOT_NOR)
++#define do_gpio_init 1
++#else
++#define do_gpio_init 0
++#endif
++
++#define GPIO_POWER_GREEN 3
++#define GPIO_POWER_RED 6
++#define GPIO_GPHY_RESET 19
++
++static void gpio_init(void)
++{
++ /* Reset switch to have him in a clean state on reboot */
++ gpio_direction_output(GPIO_GPHY_RESET, 0);
++ udelay(20);
++ gpio_direction_output(GPIO_GPHY_RESET, 1);
++
++ /* Turn on the green power LED */
++ gpio_direction_output(GPIO_POWER_GREEN, 0);
++
++ /* Turn off the red power LED */
++ gpio_direction_output(GPIO_POWER_RED, 1);
++}
++
++int board_early_init_f(void)
++{
++ if (do_gpio_init)
++ gpio_init();
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++void show_boot_progress(int arg)
++{
++ if (!do_gpio_init)
++ return 0;
++
++ if (arg >= 0) {
++ /* Success - turn off the red power LED and turn on the green power LED */
++ gpio_set_value(GPIO_POWER_RED, 1);
++ gpio_set_value(GPIO_POWER_GREEN, 0);
++ } else {
++ /* Failure - turn off green power LED and turn on red power LED */
++ gpio_set_value(GPIO_POWER_GREEN, 1);
++ gpio_set_value(GPIO_POWER_RED, 0);
++ }
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: Realtek rtl8306 switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(ð_board_config);
++}
++static struct switch_device rtl8306_dev = {
++ .name = "rtl8306",
++ .cpu_port = 5,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ return switch_device_register(&rtl8306_dev);
++}
+--- /dev/null
++++ b/board/arcadyan/arv7506pw11/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/arcadyan/arv7506pw11/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2011-2013 Luka Perkov <luka@openwrt.org>
++ *
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x102
++#define MC_DC09_VALUE 0x70A
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xC02
++#define MC_DC12_VALUE 0x1C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x142
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x301
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA03
++#define MC_DC21_VALUE 0x1300
++#define MC_DC22_VALUE 0x1313
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x68
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x510
++#define MC_DC29_VALUE 0x4E20
++#define MC_DC30_VALUE 0x8235
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -505,6 +505,9 @@ Active mips mips32 au1x0
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_brn arv4519pw:SYS_BOOT_BRN Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_nor arv4519pw:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_ram arv4519pw:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
++Active mips mips32 danube arcadyan arv7506pw11 arv7506pw11_brn arv7506pw11:SYS_BOOT_BRN Mathias Kresin <dev@kresin.me>
++Active mips mips32 danube arcadyan arv7506pw11 arv7506pw11_nor arv7506pw11:SYS_BOOT_NOR Mathias Kresin <dev@kresin.me>
++Active mips mips32 danube arcadyan arv7506pw11 arv7506pw11_ram arv7506pw11:SYS_BOOT_RAM Mathias Kresin <dev@kresin.me>
+ Active mips mips32 danube arcadyan arv7510pw arv7510pw_brn arv7510pw:SYS_BOOT_BRN Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv7510pw arv7510pw_nor arv7510pw:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv7510pw arv7510pw_ram arv7510pw:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
+--- /dev/null
++++ b/include/configs/arv7506pw11.h
+@@ -0,0 +1,62 @@
++/*
++ * Copyright (C) 2016 Mathias Kresin <dev@kresin.me>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ARV7506PW11"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Arcadyan ARV7506PW11"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_RTL8306
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_IS_NOWHERE
++#define CONFIG_ENV_OVERWRITE 1
++#elif defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (64 * 1024)
++
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ "kernel_addr=0xB0050000\0"
++
++#endif /* __CONFIG_H */
projects / openwrt / staging / adrian.git / commitdiff