mv78xx0 and kirkwood use identical mpp code.
It should also be possible to rewrite the orion5x mpp to use this
platform code.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
#include <linux/io.h>
#include <asm/gpio.h>
#include <mach/hardware.h>
+#include <plat/mpp.h>
#include "common.h"
#include "mpp.h"
return 0;
}
-#define MPP_CTRL(i) (DEV_BUS_VIRT_BASE + (i) * 4)
-#define MPP_NR_REGS (1 + MPP_MAX/8)
-
void __init kirkwood_mpp_conf(unsigned int *mpp_list)
{
- u32 mpp_ctrl[MPP_NR_REGS];
- unsigned int variant_mask;
- int i;
-
- variant_mask = kirkwood_variant();
- if (!variant_mask)
- return;
-
- printk(KERN_DEBUG "initial MPP regs:");
- for (i = 0; i < MPP_NR_REGS; i++) {
- mpp_ctrl[i] = readl(MPP_CTRL(i));
- printk(" %08x", mpp_ctrl[i]);
- }
- printk("\n");
-
- for ( ; *mpp_list; mpp_list++) {
- unsigned int num = MPP_NUM(*mpp_list);
- unsigned int sel = MPP_SEL(*mpp_list);
- int shift, gpio_mode;
-
- if (num > MPP_MAX) {
- printk(KERN_ERR "kirkwood_mpp_conf: invalid MPP "
- "number (%u)\n", num);
- continue;
- }
- if (!(*mpp_list & variant_mask)) {
- printk(KERN_WARNING
- "kirkwood_mpp_conf: requested MPP%u config "
- "unavailable on this hardware\n", num);
- continue;
- }
-
- shift = (num & 7) << 2;
- mpp_ctrl[num / 8] &= ~(0xf << shift);
- mpp_ctrl[num / 8] |= sel << shift;
-
- gpio_mode = 0;
- if (*mpp_list & MPP_INPUT_MASK)
- gpio_mode |= GPIO_INPUT_OK;
- if (*mpp_list & MPP_OUTPUT_MASK)
- gpio_mode |= GPIO_OUTPUT_OK;
- if (sel != 0)
- gpio_mode = 0;
- orion_gpio_set_valid(num, gpio_mode);
- }
-
- printk(KERN_DEBUG " final MPP regs:");
- for (i = 0; i < MPP_NR_REGS; i++) {
- writel(mpp_ctrl[i], MPP_CTRL(i));
- printk(" %08x", mpp_ctrl[i]);
- }
- printk("\n");
+ orion_mpp_conf(mpp_list, kirkwood_variant(),
+ MPP_MAX, DEV_BUS_VIRT_BASE);
}
/* available on F6281 */ ((!!(_F6281)) << 17) | \
/* available on F6282 */ ((!!(_F6282)) << 18))
-#define MPP_NUM(x) ((x) & 0xff)
-#define MPP_SEL(x) (((x) >> 8) & 0xf)
-
/* num sel i o 6180 6190 6192 6281 6282 */
-#define MPP_INPUT_MASK MPP( 0, 0x0, 1, 0, 0, 0, 0, 0, 0 )
-#define MPP_OUTPUT_MASK MPP( 0, 0x0, 0, 1, 0, 0, 0, 0, 0 )
-
#define MPP_F6180_MASK MPP( 0, 0x0, 0, 0, 1, 0, 0, 0, 0 )
#define MPP_F6190_MASK MPP( 0, 0x0, 0, 0, 0, 1, 0, 0, 0 )
#define MPP_F6192_MASK MPP( 0, 0x0, 0, 0, 0, 0, 1, 0, 0 )
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
+#include <plat/mpp.h>
#include <asm/gpio.h>
#include <mach/hardware.h>
#include "common.h"
return 0;
}
-#define MPP_CTRL(i) (DEV_BUS_VIRT_BASE + (i) * 4)
-#define MPP_NR_REGS (1 + MPP_MAX/8)
-
void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
{
- u32 mpp_ctrl[MPP_NR_REGS];
- unsigned int variant_mask;
- int i;
-
- variant_mask = mv78xx0_variant();
- if (!variant_mask)
- return;
-
- printk(KERN_DEBUG "initial MPP regs:");
- for (i = 0; i < MPP_NR_REGS; i++) {
- mpp_ctrl[i] = readl(MPP_CTRL(i));
- printk(" %08x", mpp_ctrl[i]);
- }
- printk("\n");
-
- for ( ; *mpp_list; mpp_list++) {
- unsigned int num = MPP_NUM(*mpp_list);
- unsigned int sel = MPP_SEL(*mpp_list);
- int shift, gpio_mode;
-
- if (num > MPP_MAX) {
- printk(KERN_ERR "mv78xx0_mpp_conf: invalid MPP "
- "number (%u)\n", num);
- continue;
- }
- if (!(*mpp_list & variant_mask)) {
- printk(KERN_WARNING
- "mv78xx0_mpp_conf: requested MPP%u config "
- "unavailable on this hardware\n", num);
- continue;
- }
-
- shift = (num & 7) << 2;
- mpp_ctrl[num / 8] &= ~(0xf << shift);
- mpp_ctrl[num / 8] |= sel << shift;
-
- gpio_mode = 0;
- if (*mpp_list & MPP_INPUT_MASK)
- gpio_mode |= GPIO_INPUT_OK;
- if (*mpp_list & MPP_OUTPUT_MASK)
- gpio_mode |= GPIO_OUTPUT_OK;
- if (sel != 0)
- gpio_mode = 0;
- orion_gpio_set_valid(num, gpio_mode);
- }
-
- printk(KERN_DEBUG " final MPP regs:");
- for (i = 0; i < MPP_NR_REGS; i++) {
- writel(mpp_ctrl[i], MPP_CTRL(i));
- printk(" %08x", mpp_ctrl[i]);
- }
- printk("\n");
+ orion_mpp_conf(mpp_list, mv78xx0_variant(),
+ MPP_MAX, DEV_BUS_VIRT_BASE);
}
/* may be output signal */ ((!!(_out)) << 13) | \
/* available on A0 */ ((!!(_78100_A0)) << 14))
-#define MPP_NUM(x) ((x) & 0xff)
-#define MPP_SEL(x) (((x) >> 8) & 0xf)
-
/* num sel i o 78100_A0 */
-#define MPP_INPUT_MASK MPP(0, 0x0, 1, 0, 0)
-#define MPP_OUTPUT_MASK MPP(0, 0x0, 0, 1, 0)
-
#define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1)
#define MPP0_GPIO MPP(0, 0x0, 1, 1, 1)
# Makefile for the linux kernel.
#
-obj-y := irq.o pcie.o time.o common.o
+obj-y := irq.o pcie.o time.o common.o mpp.o
obj-m :=
obj-n :=
obj- :=
--- /dev/null
+/*
+ * arch/arm/plat-orion/include/plat/mpp.h
+ *
+ * Marvell Orion SoC MPP handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_MPP_H
+#define __PLAT_MPP_H
+
+#define MPP_NUM(x) ((x) & 0xff)
+#define MPP_SEL(x) (((x) >> 8) & 0xf)
+
+/* This is the generic MPP macro, without any variant information.
+ Each machine architecture is expected to extend this with further
+ bit fields indicating which MPP configurations are valid for a
+ specific variant. */
+
+#define GENERIC_MPP(_num, _sel, _in, _out) ( \
+ /* MPP number */ ((_num) & 0xff) | \
+ /* MPP select value */ (((_sel) & 0xf) << 8) | \
+ /* may be input signal */ ((!!(_in)) << 12) | \
+ /* may be output signal */ ((!!(_out)) << 13))
+
+#define MPP_INPUT_MASK GENERIC_MPP(0, 0x0, 1, 0)
+#define MPP_OUTPUT_MASK GENERIC_MPP(0, 0x0, 0, 1)
+
+void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
+ unsigned int mpp_max, unsigned int dev_bus);
+
+#endif
--- /dev/null
+/*
+ * arch/arm/plat-orion/mpp.c
+ *
+ * MPP functions for Marvell orion SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <plat/mpp.h>
+
+/* Address of the ith MPP control register */
+static __init unsigned long mpp_ctrl_addr(unsigned int i,
+ unsigned long dev_bus)
+{
+ return dev_bus + (i) * 4;
+}
+
+
+void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
+ unsigned int mpp_max, unsigned int dev_bus)
+{
+ unsigned int mpp_nr_regs = (1 + mpp_max/8);
+ u32 mpp_ctrl[mpp_nr_regs];
+ int i;
+
+ if (!variant_mask)
+ return;
+
+ printk(KERN_DEBUG "initial MPP regs:");
+ for (i = 0; i < mpp_nr_regs; i++) {
+ mpp_ctrl[i] = readl(mpp_ctrl_addr(i, dev_bus));
+ printk(" %08x", mpp_ctrl[i]);
+ }
+ printk("\n");
+
+ for ( ; *mpp_list; mpp_list++) {
+ unsigned int num = MPP_NUM(*mpp_list);
+ unsigned int sel = MPP_SEL(*mpp_list);
+ int shift, gpio_mode;
+
+ if (num > mpp_max) {
+ printk(KERN_ERR "orion_mpp_conf: invalid MPP "
+ "number (%u)\n", num);
+ continue;
+ }
+ if (!(*mpp_list & variant_mask)) {
+ printk(KERN_WARNING
+ "orion_mpp_conf: requested MPP%u config "
+ "unavailable on this hardware\n", num);
+ continue;
+ }
+
+ shift = (num & 7) << 2;
+ mpp_ctrl[num / 8] &= ~(0xf << shift);
+ mpp_ctrl[num / 8] |= sel << shift;
+
+ gpio_mode = 0;
+ if (*mpp_list & MPP_INPUT_MASK)
+ gpio_mode |= GPIO_INPUT_OK;
+ if (*mpp_list & MPP_OUTPUT_MASK)
+ gpio_mode |= GPIO_OUTPUT_OK;
+ if (sel != 0)
+ gpio_mode = 0;
+ orion_gpio_set_valid(num, gpio_mode);
+ }
+
+ printk(KERN_DEBUG " final MPP regs:");
+ for (i = 0; i < mpp_nr_regs; i++) {
+ writel(mpp_ctrl[i], mpp_ctrl_addr(i, dev_bus));
+ printk(" %08x", mpp_ctrl[i]);
+ }
+ printk("\n");
+}
projects / openwrt / staging / blogic.git / commitdiff