---------------------------
+What: old static regulatory information and ieee80211_regdom module parameter
+When: 2.6.29
+Why: The old regulatory infrastructure has been replaced with a new one
+ which does not require statically defined regulatory domains. We do
+ not want to keep static regulatory domains in the kernel due to the
+ the dynamic nature of regulatory law and localization. We kept around
+ the old static definitions for the regulatory domains of:
+ * US
+ * JP
+ * EU
+ and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was
+ set. We also kept around the ieee80211_regdom module parameter in case
+ some applications were relying on it. Changing regulatory domains
+ can now be done instead by using nl80211, as is done with iw.
+Who: Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
What: dev->power.power_state
When: July 2007
Why: Broken design for runtime control over driver power states, confusing
--- /dev/null
+Linux wireless regulatory documentation
+---------------------------------------
+
+This document gives a brief review over how the Linux wireless
+regulatory infrastructure works.
+
+More up to date information can be obtained at the project's web page:
+
+http://wireless.kernel.org/en/developers/Regulatory
+
+Keeping regulatory domains in userspace
+---------------------------------------
+
+Due to the dynamic nature of regulatory domains we keep them
+in userspace and provide a framework for userspace to upload
+to the kernel one regulatory domain to be used as the central
+core regulatory domain all wireless devices should adhere to.
+
+How to get regulatory domains to the kernel
+-------------------------------------------
+
+Userspace gets a regulatory domain in the kernel by having
+a userspace agent build it and send it via nl80211. Only
+expected regulatory domains will be respected by the kernel.
+
+A currently available userspace agent which can accomplish this
+is CRDA - central regulatory domain agent. Its documented here:
+
+http://wireless.kernel.org/en/developers/Regulatory/CRDA
+
+Essentially the kernel will send a udev event when it knows
+it needs a new regulatory domain. A udev rule can be put in place
+to trigger crda to send the respective regulatory domain for a
+specific ISO/IEC 3166 alpha2.
+
+Below is an example udev rule which can be used:
+
+# Example file, should be put in /etc/udev/rules.d/regulatory.rules
+KERNEL=="regulatory*", ACTION=="change", SUBSYSTEM=="platform", RUN+="/sbin/crda"
+
+The alpha2 is passed as an environment variable under the variable COUNTRY.
+
+Who asks for regulatory domains?
+--------------------------------
+
+* Users
+
+Users can use iw:
+
+http://wireless.kernel.org/en/users/Documentation/iw
+
+An example:
+
+ # set regulatory domain to "Costa Rica"
+ iw reg set CR
+
+This will request the kernel to set the regulatory domain to
+the specificied alpha2. The kernel in turn will then ask userspace
+to provide a regulatory domain for the alpha2 specified by the user
+by sending a uevent.
+
+* Wireless subsystems for Country Information elements
+
+The kernel will send a uevent to inform userspace a new
+regulatory domain is required. More on this to be added
+as its integration is added.
+
+* Drivers
+
+If drivers determine they need a specific regulatory domain
+set they can inform the wireless core using regulatory_hint().
+They have two options -- they either provide an alpha2 so that
+crda can provide back a regulatory domain for that country or
+they can build their own regulatory domain based on internal
+custom knowledge so the wireless core can respect it.
+
+*Most* drivers will rely on the first mechanism of providing a
+regulatory hint with an alpha2. For these drivers there is an additional
+check that can be used to ensure compliance based on custom EEPROM
+regulatory data. This additional check can be used by drivers by
+registering on its struct wiphy a reg_notifier() callback. This notifier
+is called when the core's regulatory domain has been changed. The driver
+can use this to review the changes made and also review who made them
+(driver, user, country IE) and determine what to allow based on its
+internal EEPROM data. Devices drivers wishing to be capable of world
+roaming should use this callback. More on world roaming will be
+added to this document when its support is enabled.
+
+Device drivers who provide their own built regulatory domain
+do not need a callback as the channels registered by them are
+the only ones that will be allowed and therefore *additional*
+cannels cannot be enabled.
+
+Example code - drivers hinting an alpha2:
+------------------------------------------
+
+This example comes from the zd1211rw device driver. You can start
+by having a mapping of your device's EEPROM country/regulatory
+domain value to to a specific alpha2 as follows:
+
+static struct zd_reg_alpha2_map reg_alpha2_map[] = {
+ { ZD_REGDOMAIN_FCC, "US" },
+ { ZD_REGDOMAIN_IC, "CA" },
+ { ZD_REGDOMAIN_ETSI, "DE" }, /* Generic ETSI, use most restrictive */
+ { ZD_REGDOMAIN_JAPAN, "JP" },
+ { ZD_REGDOMAIN_JAPAN_ADD, "JP" },
+ { ZD_REGDOMAIN_SPAIN, "ES" },
+ { ZD_REGDOMAIN_FRANCE, "FR" },
+
+Then you can define a routine to map your read EEPROM value to an alpha2,
+as follows:
+
+static int zd_reg2alpha2(u8 regdomain, char *alpha2)
+{
+ unsigned int i;
+ struct zd_reg_alpha2_map *reg_map;
+ for (i = 0; i < ARRAY_SIZE(reg_alpha2_map); i++) {
+ reg_map = ®_alpha2_map[i];
+ if (regdomain == reg_map->reg) {
+ alpha2[0] = reg_map->alpha2[0];
+ alpha2[1] = reg_map->alpha2[1];
+ return 0;
+ }
+ }
+ return 1;
+}
+
+Lastly, you can then hint to the core of your discovered alpha2, if a match
+was found. You need to do this after you have registered your wiphy. You
+are expected to do this during initialization.
+
+ r = zd_reg2alpha2(mac->regdomain, alpha2);
+ if (!r)
+ regulatory_hint(hw->wiphy, alpha2, NULL);
+
+Example code - drivers providing a built in regulatory domain:
+--------------------------------------------------------------
+
+If you have regulatory information you can obtain from your
+driver and you *need* to use this we let you build a regulatory domain
+structure and pass it to the wireless core. To do this you should
+kmalloc() a structure big enough to hold your regulatory domain
+structure and you should then fill it with your data. Finally you simply
+call regulatory_hint() with the regulatory domain structure in it.
+
+Bellow is a simple example, with a regulatory domain cached using the stack.
+Your implementation may vary (read EEPROM cache instead, for example).
+
+Example cache of some regulatory domain
+
+struct ieee80211_regdomain mydriver_jp_regdom = {
+ .n_reg_rules = 3,
+ .alpha2 = "JP",
+ //.alpha2 = "99", /* If I have no alpha2 to map it to */
+ .reg_rules = {
+ /* IEEE 802.11b/g, channels 1..14 */
+ REG_RULE(2412-20, 2484+20, 40, 6, 20, 0),
+ /* IEEE 802.11a, channels 34..48 */
+ REG_RULE(5170-20, 5240+20, 40, 6, 20,
+ NL80211_RRF_PASSIVE_SCAN),
+ /* IEEE 802.11a, channels 52..64 */
+ REG_RULE(5260-20, 5320+20, 40, 6, 20,
+ NL80211_RRF_NO_IBSS |
+ NL80211_RRF_DFS),
+ }
+};
+
+Then in some part of your code after your wiphy has been registered:
+
+ int r;
+ struct ieee80211_regdomain *rd;
+ int size_of_regd;
+ int num_rules = mydriver_jp_regdom.n_reg_rules;
+ unsigned int i;
+
+ size_of_regd = sizeof(struct ieee80211_regdomain) +
+ (num_rules * sizeof(struct ieee80211_reg_rule));
+
+ rd = kzalloc(size_of_regd, GFP_KERNEL);
+ if (!rd)
+ return -ENOMEM;
+
+ memcpy(rd, &mydriver_jp_regdom, sizeof(struct ieee80211_regdomain));
+
+ for (i=0; i < num_rules; i++) {
+ memcpy(&rd->reg_rules[i], &mydriver_jp_regdom.reg_rules[i],
+ sizeof(struct ieee80211_reg_rule));
+ }
+ r = regulatory_hint(hw->wiphy, NULL, rd);
+ if (r) {
+ kfree(rd);
+ return r;
+ }
+
* @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
* %NL80211_ATTR_IFINDEX.
*
+ * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
+ * after being queried by the kernel. CRDA replies by sending a regulatory
+ * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
+ * current alpha2 if it found a match. It also provides
+ * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+ * regulatory rule is a nested set of attributes given by
+ * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+ * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+ * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+ * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
+ * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will
+ * store this as a valid request and then query userspace for it.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
NL80211_CMD_SET_BSS,
- /* add commands here */
+ NL80211_CMD_SET_REG,
+ NL80211_CMD_REQ_SET_REG,
+
+ /* add new commands above here */
/* used to define NL80211_CMD_MAX below */
__NL80211_CMD_AFTER_LAST,
* info given for %NL80211_CMD_GET_MPATH, nested attribute described at
* &enum nl80211_mpath_info.
*
- *
* @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
* &enum nl80211_mntr_flags.
*
+ * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
+ * current regulatory domain should be set to or is already set to.
+ * For example, 'CR', for Costa Rica. This attribute is used by the kernel
+ * to query the CRDA to retrieve one regulatory domain. This attribute can
+ * also be used by userspace to query the kernel for the currently set
+ * regulatory domain. We chose an alpha2 as that is also used by the
+ * IEEE-802.11d country information element to identify a country.
+ * Users can also simply ask the wireless core to set regulatory domain
+ * to a specific alpha2.
+ * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
+ * rules.
+ *
* @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
* @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
* (u8, 0 or 1)
NL80211_ATTR_SUPPORTED_IFTYPES,
+ NL80211_ATTR_REG_ALPHA2,
+ NL80211_ATTR_REG_RULES,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
#define NL80211_MAX_SUPP_RATES 32
+#define NL80211_MAX_SUPP_REG_RULES 32
#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
};
+/**
+ * enum nl80211_reg_rule_attr - regulatory rule attributes
+ * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
+ * considerations for a given frequency range. These are the
+ * &enum nl80211_reg_rule_flags.
+ * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
+ * rule in KHz. This is not a center of frequency but an actual regulatory
+ * band edge.
+ * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
+ * in KHz. This is not a center a frequency but an actual regulatory
+ * band edge.
+ * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
+ * frequency range, in KHz.
+ * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
+ * for a given frequency range. The value is in mBi (100 * dBi).
+ * If you don't have one then don't send this.
+ * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
+ * a given frequency range. The value is in mBm (100 * dBm).
+ */
+enum nl80211_reg_rule_attr {
+ __NL80211_REG_RULE_ATTR_INVALID,
+ NL80211_ATTR_REG_RULE_FLAGS,
+
+ NL80211_ATTR_FREQ_RANGE_START,
+ NL80211_ATTR_FREQ_RANGE_END,
+ NL80211_ATTR_FREQ_RANGE_MAX_BW,
+
+ NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
+ NL80211_ATTR_POWER_RULE_MAX_EIRP,
+
+ /* keep last */
+ __NL80211_REG_RULE_ATTR_AFTER_LAST,
+ NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_reg_rule_flags - regulatory rule flags
+ *
+ * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
+ * @NL80211_RRF_NO_CCK: CCK modulation not allowed
+ * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
+ * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
+ * @NL80211_RRF_DFS: DFS support is required to be used
+ * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
+ * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
+ * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
+ * @NL80211_RRF_NO_IBSS: no IBSS is allowed
+ */
+enum nl80211_reg_rule_flags {
+ NL80211_RRF_NO_OFDM = 1<<0,
+ NL80211_RRF_NO_CCK = 1<<1,
+ NL80211_RRF_NO_INDOOR = 1<<2,
+ NL80211_RRF_NO_OUTDOOR = 1<<3,
+ NL80211_RRF_DFS = 1<<4,
+ NL80211_RRF_PTP_ONLY = 1<<5,
+ NL80211_RRF_PTMP_ONLY = 1<<6,
+ NL80211_RRF_PASSIVE_SCAN = 1<<7,
+ NL80211_RRF_NO_IBSS = 1<<8,
+};
+
/**
* enum nl80211_mntr_flags - monitor configuration flags
*
int use_short_slot_time;
};
+/**
+ * enum reg_set_by - Indicates who is trying to set the regulatory domain
+ * @REGDOM_SET_BY_INIT: regulatory domain was set by initialization. We will be
+ * using a static world regulatory domain by default.
+ * @REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world regulatory domain.
+ * @REGDOM_SET_BY_USER: User asked the wireless core to set the
+ * regulatory domain.
+ * @REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the wireless core
+ * it thinks its knows the regulatory domain we should be in.
+ * @REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an 802.11 country
+ * information element with regulatory information it thinks we
+ * should consider.
+ */
+enum reg_set_by {
+ REGDOM_SET_BY_INIT,
+ REGDOM_SET_BY_CORE,
+ REGDOM_SET_BY_USER,
+ REGDOM_SET_BY_DRIVER,
+ REGDOM_SET_BY_COUNTRY_IE,
+};
+
+struct ieee80211_freq_range {
+ u32 start_freq_khz;
+ u32 end_freq_khz;
+ u32 max_bandwidth_khz;
+};
+
+struct ieee80211_power_rule {
+ u32 max_antenna_gain;
+ u32 max_eirp;
+};
+
+struct ieee80211_reg_rule {
+ struct ieee80211_freq_range freq_range;
+ struct ieee80211_power_rule power_rule;
+ u32 flags;
+};
+
+struct ieee80211_regdomain {
+ u32 n_reg_rules;
+ char alpha2[2];
+ struct ieee80211_reg_rule reg_rules[];
+};
+
+#define MHZ_TO_KHZ(freq) (freq * 1000)
+#define KHZ_TO_MHZ(freq) (freq / 1000)
+#define DBI_TO_MBI(gain) (gain * 100)
+#define MBI_TO_DBI(gain) (gain / 100)
+#define DBM_TO_MBM(gain) (gain * 100)
+#define MBM_TO_DBM(gain) (gain / 100)
+
+#define REG_RULE(start, end, bw, gain, eirp, reg_flags) { \
+ .freq_range.start_freq_khz = (start) * 1000, \
+ .freq_range.end_freq_khz = (end) * 1000, \
+ .freq_range.max_bandwidth_khz = (bw) * 1000, \
+ .power_rule.max_antenna_gain = (gain) * 100, \
+ .power_rule.max_eirp = (eirp) * 100, \
+ .flags = reg_flags, \
+ }
+
/* from net/wireless.h */
struct wiphy;
s8 max_signal;
};
+struct ieee80211_hw *wiphy_to_hw(struct wiphy *wiphy);
+
/**
* SET_IEEE80211_DEV - set device for 802.11 hardware
*
* with cfg80211.
*
* @center_freq: center frequency in MHz
+ * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz
* @hw_value: hardware-specific value for the channel
* @flags: channel flags from &enum ieee80211_channel_flags.
* @orig_flags: channel flags at registration time, used by regulatory
struct ieee80211_channel {
enum ieee80211_band band;
u16 center_freq;
+ u8 max_bandwidth;
u16 hw_value;
u32 flags;
int max_antenna_gain;
* struct wiphy - wireless hardware description
* @idx: the wiphy index assigned to this item
* @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
+ * @reg_notifier: the driver's regulatory notification callback
*/
struct wiphy {
/* assign these fields before you register the wiphy */
struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
+ /* Lets us get back the wiphy on the callback */
+ int (*reg_notifier)(struct wiphy *wiphy, enum reg_set_by setby);
+
/* fields below are read-only, assigned by cfg80211 */
/* the item in /sys/class/ieee80211/ points to this,
*/
extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
int freq);
+/**
+ * __regulatory_hint - hint to the wireless core a regulatory domain
+ * @wiphy: if a driver is providing the hint this is the driver's very
+ * own &struct wiphy
+ * @alpha2: the ISO/IEC 3166 alpha2 being claimed the regulatory domain
+ * should be in. If @rd is set this should be NULL
+ * @rd: a complete regulatory domain, if passed the caller need not worry
+ * about freeing it
+ *
+ * The Wireless subsystem can use this function to hint to the wireless core
+ * what it believes should be the current regulatory domain by
+ * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
+ * domain should be in or by providing a completely build regulatory domain.
+ *
+ * Returns -EALREADY if *a regulatory domain* has already been set. Note that
+ * this could be by another driver. It is safe for drivers to continue if
+ * -EALREADY is returned, if drivers are not capable of world roaming they
+ * should not register more channels than they support. Right now we only
+ * support listening to the first driver hint. If the driver is capable
+ * of world roaming but wants to respect its own EEPROM mappings for
+ * specific regulatory domains it should register the @reg_notifier callback
+ * on the &struct wiphy. Returns 0 if the hint went through fine or through an
+ * intersection operation. Otherwise a standard error code is returned.
+ *
+ */
+extern int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by,
+ const char *alpha2, struct ieee80211_regdomain *rd);
+/**
+ * regulatory_hint - driver hint to the wireless core a regulatory domain
+ * @wiphy: the driver's very own &struct wiphy
+ * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
+ * should be in. If @rd is set this should be NULL. Note that if you
+ * set this to NULL you should still set rd->alpha2 to some accepted
+ * alpha2.
+ * @rd: a complete regulatory domain provided by the driver. If passed
+ * the driver does not need to worry about freeing it.
+ *
+ * Wireless drivers can use this function to hint to the wireless core
+ * what it believes should be the current regulatory domain by
+ * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
+ * domain should be in or by providing a completely build regulatory domain.
+ * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
+ * for a regulatory domain structure for the respective country. If
+ * a regulatory domain is build and passed you should set the alpha2
+ * if possible, otherwise set it to the special value of "99" which tells
+ * the wireless core it is unknown. If you pass a built regulatory domain
+ * and we return non zero you are in charge of kfree()'ing the structure.
+ *
+ * See __regulatory_hint() documentation for possible return values.
+ */
+extern int regulatory_hint(struct wiphy *wiphy,
+ const char *alpha2, struct ieee80211_regdomain *rd);
/**
* ieee80211_get_channel - get channel struct from wiphy for specified frequency
#include "rate.h"
#include "mesh.h"
+struct ieee80211_hw *wiphy_to_hw(struct wiphy *wiphy)
+{
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+ return &local->hw;
+}
+EXPORT_SYMBOL(wiphy_to_hw);
+
static enum ieee80211_if_types
nl80211_type_to_mac80211_type(enum nl80211_iftype type)
{
If unsure, say Y.
+config WIRELESS_OLD_REGULATORY
+ bool "Old wireless static regulatory defintions"
+ default n
+ ---help---
+ This option enables the old static regulatory information
+ and uses it within the new framework. This is available
+ temporarily as an option to help prevent immediate issues
+ due to the switch to the new regulatory framework which
+ does require a new userspace application which has the
+ database of regulatory information (CRDA) and another for
+ setting regulatory domains (iw).
+
+ For more information see:
+
+ http://wireless.kernel.org/en/developers/Regulatory/CRDA
+ http://wireless.kernel.org/en/users/Documentation/iw
+
+ It is important to note though that if you *do* have CRDA present
+ and if this option is enabled CRDA *will* be called to update the
+ regulatory domain (for US and JP only). Support for letting the user
+ set the regulatory domain through iw is also supported. This option
+ mainly exists to leave around for a kernel release some old static
+ regulatory domains that were defined and to keep around the old
+ ieee80211_regdom module parameter. This is being phased out and you
+ should stop using them ASAP.
+
+ Say N unless you cannot install a new userspace application
+ or have one currently depending on the ieee80211_regdom module
+ parameter and cannot port it to use the new userspace interfaces.
+
+ This is scheduled for removal for 2.6.29.
+
config WIRELESS_EXT
bool "Wireless extensions"
default n
#include <linux/debugfs.h>
#include <linux/notifier.h>
#include <linux/device.h>
+#include <linux/list.h>
#include <net/genetlink.h>
#include <net/cfg80211.h>
#include <net/wireless.h>
#include "nl80211.h"
#include "core.h"
#include "sysfs.h"
+#include "reg.h"
/* name for sysfs, %d is appended */
#define PHY_NAME "phy"
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("wireless configuration support");
+struct list_head regulatory_requests;
+
+/* Central wireless core regulatory domains, we only need two,
+ * the current one and a world regulatory domain in case we have no
+ * information to give us an alpha2 */
+struct ieee80211_regdomain *cfg80211_regdomain;
+
+/* We keep a static world regulatory domain in case of the absence of CRDA */
+const struct ieee80211_regdomain world_regdom = {
+ .n_reg_rules = 1,
+ .alpha2 = "00",
+ .reg_rules = {
+ REG_RULE(2402, 2472, 40, 6, 20,
+ NL80211_RRF_PASSIVE_SCAN |
+ NL80211_RRF_NO_IBSS),
+ }
+};
+
+#ifdef CONFIG_WIRELESS_OLD_REGULATORY
+/* All this fucking static junk will be removed soon, so
+ * don't fucking count on it !@#$ */
+
+static char *ieee80211_regdom = "US";
+module_param(ieee80211_regdom, charp, 0444);
+MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code");
+
+/* We assume 40 MHz bandwidth for the old regulatory work.
+ * We make emphasis we are using the exact same frequencies
+ * as before */
+
+const struct ieee80211_regdomain us_regdom = {
+ .n_reg_rules = 6,
+ .alpha2 = "US",
+ .reg_rules = {
+ /* IEEE 802.11b/g, channels 1..11 */
+ REG_RULE(2412-20, 2462+20, 40, 6, 27, 0),
+ /* IEEE 802.11a, channel 36 */
+ REG_RULE(5180-20, 5180+20, 40, 6, 23, 0),
+ /* IEEE 802.11a, channel 40 */
+ REG_RULE(5200-20, 5200+20, 40, 6, 23, 0),
+ /* IEEE 802.11a, channel 44 */
+ REG_RULE(5220-20, 5220+20, 40, 6, 23, 0),
+ /* IEEE 802.11a, channels 48..64 */
+ REG_RULE(5240-20, 5320+20, 40, 6, 23, 0),
+ /* IEEE 802.11a, channels 149..165, outdoor */
+ REG_RULE(5745-20, 5825+20, 40, 6, 30, 0),
+ }
+};
+
+const struct ieee80211_regdomain jp_regdom = {
+ .n_reg_rules = 3,
+ .alpha2 = "JP",
+ .reg_rules = {
+ /* IEEE 802.11b/g, channels 1..14 */
+ REG_RULE(2412-20, 2484+20, 40, 6, 20, 0),
+ /* IEEE 802.11a, channels 34..48 */
+ REG_RULE(5170-20, 5240+20, 40, 6, 20,
+ NL80211_RRF_PASSIVE_SCAN),
+ /* IEEE 802.11a, channels 52..64 */
+ REG_RULE(5260-20, 5320+20, 40, 6, 20,
+ NL80211_RRF_NO_IBSS |
+ NL80211_RRF_DFS),
+ }
+};
+
+const struct ieee80211_regdomain eu_regdom = {
+ .n_reg_rules = 6,
+ /* This alpha2 is bogus, we leave it here just for stupid
+ * backward compatibility */
+ .alpha2 = "EU",
+ .reg_rules = {
+ /* IEEE 802.11b/g, channels 1..13 */
+ REG_RULE(2412-20, 2472+20, 40, 6, 20, 0),
+ /* IEEE 802.11a, channel 36 */
+ REG_RULE(5180-20, 5180+20, 40, 6, 23,
+ NL80211_RRF_PASSIVE_SCAN),
+ /* IEEE 802.11a, channel 40 */
+ REG_RULE(5200-20, 5200+20, 40, 6, 23,
+ NL80211_RRF_PASSIVE_SCAN),
+ /* IEEE 802.11a, channel 44 */
+ REG_RULE(5220-20, 5220+20, 40, 6, 23,
+ NL80211_RRF_PASSIVE_SCAN),
+ /* IEEE 802.11a, channels 48..64 */
+ REG_RULE(5240-20, 5320+20, 40, 6, 20,
+ NL80211_RRF_NO_IBSS |
+ NL80211_RRF_DFS),
+ /* IEEE 802.11a, channels 100..140 */
+ REG_RULE(5500-20, 5700+20, 40, 6, 30,
+ NL80211_RRF_NO_IBSS |
+ NL80211_RRF_DFS),
+ }
+};
+
+#endif
+
+struct ieee80211_regdomain *cfg80211_world_regdom =
+ (struct ieee80211_regdomain *) &world_regdom;
+
+LIST_HEAD(regulatory_requests);
+DEFINE_MUTEX(cfg80211_reg_mutex);
+
/* RCU might be appropriate here since we usually
* only read the list, and that can happen quite
* often because we need to do it for each command */
ieee80211_set_bitrate_flags(wiphy);
/* set up regulatory info */
- wiphy_update_regulatory(wiphy);
+ mutex_lock(&cfg80211_reg_mutex);
+ wiphy_update_regulatory(wiphy, REGDOM_SET_BY_CORE);
+ mutex_unlock(&cfg80211_reg_mutex);
mutex_lock(&cfg80211_drv_mutex);
.notifier_call = cfg80211_netdev_notifier_call,
};
+#ifdef CONFIG_WIRELESS_OLD_REGULATORY
+const struct ieee80211_regdomain *static_regdom(char *alpha2)
+{
+ if (alpha2[0] == 'U' && alpha2[1] == 'S')
+ return &us_regdom;
+ if (alpha2[0] == 'J' && alpha2[1] == 'P')
+ return &jp_regdom;
+ if (alpha2[0] == 'E' && alpha2[1] == 'U')
+ return &eu_regdom;
+ /* Default, as per the old rules */
+ return &us_regdom;
+}
+#endif
+
static int cfg80211_init(void)
{
- int err = wiphy_sysfs_init();
+ int err;
+
+#ifdef CONFIG_WIRELESS_OLD_REGULATORY
+ cfg80211_regdomain =
+ (struct ieee80211_regdomain *) static_regdom(ieee80211_regdom);
+ /* Used during reset_regdomains_static() */
+ cfg80211_world_regdom = cfg80211_regdomain;
+#else
+ cfg80211_regdomain =
+ (struct ieee80211_regdomain *) cfg80211_world_regdom;
+#endif
+
+ err = wiphy_sysfs_init();
if (err)
goto out_fail_sysfs;
ieee80211_debugfs_dir = debugfs_create_dir("ieee80211", NULL);
+ err = regulatory_init();
+ if (err)
+ goto out_fail_reg;
+
+#ifdef CONFIG_WIRELESS_OLD_REGULATORY
+ printk(KERN_INFO "cfg80211: Using old static regulatory domain:\n");
+ print_regdomain_info(cfg80211_regdomain);
+ /* The old code still requests for a new regdomain and if
+ * you have CRDA you get it updated, otherwise you get
+ * stuck with the static values. We ignore "EU" code as
+ * that is not a valid ISO / IEC 3166 alpha2 */
+ if (ieee80211_regdom[0] != 'E' &&
+ ieee80211_regdom[1] != 'U')
+ err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE,
+ ieee80211_regdom, NULL);
+#else
+ err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, "00", NULL);
+ if (err)
+ printk(KERN_ERR "cfg80211: calling CRDA failed - "
+ "unable to update world regulatory domain, "
+ "using static definition\n");
+#endif
+
return 0;
+out_fail_reg:
+ debugfs_remove(ieee80211_debugfs_dir);
out_fail_nl80211:
unregister_netdevice_notifier(&cfg80211_netdev_notifier);
out_fail_notifier:
out_fail_sysfs:
return err;
}
+
subsys_initcall(cfg80211_init);
static void cfg80211_exit(void)
nl80211_exit();
unregister_netdevice_notifier(&cfg80211_netdev_notifier);
wiphy_sysfs_exit();
+ regulatory_exit();
}
module_exit(cfg80211_exit);
char *newname);
void ieee80211_set_bitrate_flags(struct wiphy *wiphy);
-void wiphy_update_regulatory(struct wiphy *wiphy);
+void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby);
#endif /* __NET_WIRELESS_CORE_H */
#include <net/cfg80211.h>
#include "core.h"
#include "nl80211.h"
+#include "reg.h"
/* the netlink family */
static struct genl_family nl80211_fam = {
.len = IEEE80211_MAX_MESH_ID_LEN },
[NL80211_ATTR_MPATH_NEXT_HOP] = { .type = NLA_U32 },
+ [NL80211_ATTR_REG_ALPHA2] = { .type = NLA_STRING, .len = 2 },
+ [NL80211_ATTR_REG_RULES] = { .type = NLA_NESTED },
+
[NL80211_ATTR_BSS_CTS_PROT] = { .type = NLA_U8 },
[NL80211_ATTR_BSS_SHORT_PREAMBLE] = { .type = NLA_U8 },
[NL80211_ATTR_BSS_SHORT_SLOT_TIME] = { .type = NLA_U8 },
return err;
}
+static const struct nla_policy
+ reg_rule_policy[NL80211_REG_RULE_ATTR_MAX + 1] = {
+ [NL80211_ATTR_REG_RULE_FLAGS] = { .type = NLA_U32 },
+ [NL80211_ATTR_FREQ_RANGE_START] = { .type = NLA_U32 },
+ [NL80211_ATTR_FREQ_RANGE_END] = { .type = NLA_U32 },
+ [NL80211_ATTR_FREQ_RANGE_MAX_BW] = { .type = NLA_U32 },
+ [NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN] = { .type = NLA_U32 },
+ [NL80211_ATTR_POWER_RULE_MAX_EIRP] = { .type = NLA_U32 },
+};
+
+static int parse_reg_rule(struct nlattr *tb[],
+ struct ieee80211_reg_rule *reg_rule)
+{
+ struct ieee80211_freq_range *freq_range = ®_rule->freq_range;
+ struct ieee80211_power_rule *power_rule = ®_rule->power_rule;
+
+ if (!tb[NL80211_ATTR_REG_RULE_FLAGS])
+ return -EINVAL;
+ if (!tb[NL80211_ATTR_FREQ_RANGE_START])
+ return -EINVAL;
+ if (!tb[NL80211_ATTR_FREQ_RANGE_END])
+ return -EINVAL;
+ if (!tb[NL80211_ATTR_FREQ_RANGE_MAX_BW])
+ return -EINVAL;
+ if (!tb[NL80211_ATTR_POWER_RULE_MAX_EIRP])
+ return -EINVAL;
+
+ reg_rule->flags = nla_get_u32(tb[NL80211_ATTR_REG_RULE_FLAGS]);
+
+ freq_range->start_freq_khz =
+ nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_START]);
+ freq_range->end_freq_khz =
+ nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_END]);
+ freq_range->max_bandwidth_khz =
+ nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]);
+
+ power_rule->max_eirp =
+ nla_get_u32(tb[NL80211_ATTR_POWER_RULE_MAX_EIRP]);
+
+ if (tb[NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN])
+ power_rule->max_antenna_gain =
+ nla_get_u32(tb[NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN]);
+
+ return 0;
+}
+
+static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
+{
+ int r;
+ char *data = NULL;
+
+ if (!info->attrs[NL80211_ATTR_REG_ALPHA2])
+ return -EINVAL;
+
+ data = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]);
+
+#ifdef CONFIG_WIRELESS_OLD_REGULATORY
+ /* We ignore world regdom requests with the old regdom setup */
+ if (is_world_regdom(data))
+ return -EINVAL;
+#endif
+ mutex_lock(&cfg80211_drv_mutex);
+ r = __regulatory_hint(NULL, REGDOM_SET_BY_USER, data, NULL);
+ mutex_unlock(&cfg80211_drv_mutex);
+ return r;
+}
+
+static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info)
+{
+ struct nlattr *tb[NL80211_REG_RULE_ATTR_MAX + 1];
+ struct nlattr *nl_reg_rule;
+ char *alpha2 = NULL;
+ int rem_reg_rules = 0, r = 0;
+ u32 num_rules = 0, rule_idx = 0, size_of_regd;
+ struct ieee80211_regdomain *rd = NULL;
+
+ if (!info->attrs[NL80211_ATTR_REG_ALPHA2])
+ return -EINVAL;
+
+ if (!info->attrs[NL80211_ATTR_REG_RULES])
+ return -EINVAL;
+
+ alpha2 = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]);
+
+ nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES],
+ rem_reg_rules) {
+ num_rules++;
+ if (num_rules > NL80211_MAX_SUPP_REG_RULES)
+ goto bad_reg;
+ }
+
+ if (!reg_is_valid_request(alpha2))
+ return -EINVAL;
+
+ size_of_regd = sizeof(struct ieee80211_regdomain) +
+ (num_rules * sizeof(struct ieee80211_reg_rule));
+
+ rd = kzalloc(size_of_regd, GFP_KERNEL);
+ if (!rd)
+ return -ENOMEM;
+
+ rd->n_reg_rules = num_rules;
+ rd->alpha2[0] = alpha2[0];
+ rd->alpha2[1] = alpha2[1];
+
+ nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES],
+ rem_reg_rules) {
+ nla_parse(tb, NL80211_REG_RULE_ATTR_MAX,
+ nla_data(nl_reg_rule), nla_len(nl_reg_rule),
+ reg_rule_policy);
+ r = parse_reg_rule(tb, &rd->reg_rules[rule_idx]);
+ if (r)
+ goto bad_reg;
+
+ rule_idx++;
+
+ if (rule_idx > NL80211_MAX_SUPP_REG_RULES)
+ goto bad_reg;
+ }
+
+ BUG_ON(rule_idx != num_rules);
+
+ mutex_lock(&cfg80211_drv_mutex);
+ r = set_regdom(rd);
+ mutex_unlock(&cfg80211_drv_mutex);
+ if (r)
+ goto bad_reg;
+
+ return r;
+
+bad_reg:
+ kfree(rd);
+ return -EINVAL;
+}
+
static struct genl_ops nl80211_ops[] = {
{
.cmd = NL80211_CMD_GET_WIPHY,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
+ {
+ .cmd = NL80211_CMD_SET_REG,
+ .doit = nl80211_set_reg,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
+ {
+ .cmd = NL80211_CMD_REQ_SET_REG,
+ .doit = nl80211_req_set_reg,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
};
/* multicast groups */
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2008 Luis R. Rodriguez <lrodriguz@atheros.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-/*
- * This regulatory domain control implementation is highly incomplete, it
- * only exists for the purpose of not regressing mac80211.
- *
- * For now, drivers can restrict the set of allowed channels by either
- * not registering those channels or setting the IEEE80211_CHAN_DISABLED
- * flag; that flag will only be *set* by this code, never *cleared.
+/**
+ * DOC: Wireless regulatory infrastructure
*
* The usual implementation is for a driver to read a device EEPROM to
* determine which regulatory domain it should be operating under, then
* looking up the allowable channels in a driver-local table and finally
* registering those channels in the wiphy structure.
*
- * Alternatively, drivers that trust the regulatory domain control here
- * will register a complete set of capabilities and the control code
- * will restrict the set by setting the IEEE80211_CHAN_* flags.
+ * Another set of compliance enforcement is for drivers to use their
+ * own compliance limits which can be stored on the EEPROM. The host
+ * driver or firmware may ensure these are used.
+ *
+ * In addition to all this we provide an extra layer of regulatory
+ * conformance. For drivers which do not have any regulatory
+ * information CRDA provides the complete regulatory solution.
+ * For others it provides a community effort on further restrictions
+ * to enhance compliance.
+ *
+ * Note: When number of rules --> infinity we will not be able to
+ * index on alpha2 any more, instead we'll probably have to
+ * rely on some SHA1 checksum of the regdomain for example.
+ *
*/
#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/random.h>
+#include <linux/nl80211.h>
+#include <linux/platform_device.h>
#include <net/wireless.h>
+#include <net/cfg80211.h>
#include "core.h"
+#include "reg.h"
-static char *ieee80211_regdom = "US";
-module_param(ieee80211_regdom, charp, 0444);
-MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code");
+/* To trigger userspace events */
+static struct platform_device *reg_pdev;
-struct ieee80211_channel_range {
- short start_freq;
- short end_freq;
- int max_power;
- int max_antenna_gain;
- u32 flags;
+/* Keep the ordering from large to small */
+static u32 supported_bandwidths[] = {
+ MHZ_TO_KHZ(40),
+ MHZ_TO_KHZ(20),
};
-struct ieee80211_regdomain {
- const char *code;
- const struct ieee80211_channel_range *ranges;
- int n_ranges;
-};
+bool is_world_regdom(char *alpha2)
+{
+ if (!alpha2)
+ return false;
+ if (alpha2[0] == '0' && alpha2[1] == '0')
+ return true;
+ return false;
+}
-#define RANGE_PWR(_start, _end, _pwr, _ag, _flags) \
- { _start, _end, _pwr, _ag, _flags }
+static bool is_alpha2_set(char *alpha2)
+{
+ if (!alpha2)
+ return false;
+ if (alpha2[0] != 0 && alpha2[1] != 0)
+ return true;
+ return false;
+}
+static bool is_alpha_upper(char letter)
+{
+ /* ASCII A - Z */
+ if (letter >= 65 && letter <= 90)
+ return true;
+ return false;
+}
-/*
- * Ideally, in the future, these definitions will be loaded from a
- * userspace table via some daemon.
- */
-static const struct ieee80211_channel_range ieee80211_US_channels[] = {
- /* IEEE 802.11b/g, channels 1..11 */
- RANGE_PWR(2412, 2462, 27, 6, 0),
- /* IEEE 802.11a, channel 36*/
- RANGE_PWR(5180, 5180, 23, 6, 0),
- /* IEEE 802.11a, channel 40*/
- RANGE_PWR(5200, 5200, 23, 6, 0),
- /* IEEE 802.11a, channel 44*/
- RANGE_PWR(5220, 5220, 23, 6, 0),
- /* IEEE 802.11a, channels 48..64 */
- RANGE_PWR(5240, 5320, 23, 6, 0),
- /* IEEE 802.11a, channels 149..165, outdoor */
- RANGE_PWR(5745, 5825, 30, 6, 0),
-};
+static bool is_unknown_alpha2(char *alpha2)
+{
+ if (!alpha2)
+ return false;
+ /* Special case where regulatory domain was built by driver
+ * but a specific alpha2 cannot be determined */
+ if (alpha2[0] == '9' && alpha2[1] == '9')
+ return true;
+ return false;
+}
-static const struct ieee80211_channel_range ieee80211_JP_channels[] = {
- /* IEEE 802.11b/g, channels 1..14 */
- RANGE_PWR(2412, 2484, 20, 6, 0),
- /* IEEE 802.11a, channels 34..48 */
- RANGE_PWR(5170, 5240, 20, 6, IEEE80211_CHAN_PASSIVE_SCAN),
- /* IEEE 802.11a, channels 52..64 */
- RANGE_PWR(5260, 5320, 20, 6, IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_RADAR),
-};
+static bool is_an_alpha2(char *alpha2)
+{
+ if (!alpha2)
+ return false;
+ if (is_alpha_upper(alpha2[0]) && is_alpha_upper(alpha2[1]))
+ return true;
+ return false;
+}
-static const struct ieee80211_channel_range ieee80211_EU_channels[] = {
- /* IEEE 802.11b/g, channels 1..13 */
- RANGE_PWR(2412, 2472, 20, 6, 0),
- /* IEEE 802.11a, channel 36*/
- RANGE_PWR(5180, 5180, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN),
- /* IEEE 802.11a, channel 40*/
- RANGE_PWR(5200, 5200, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN),
- /* IEEE 802.11a, channel 44*/
- RANGE_PWR(5220, 5220, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN),
- /* IEEE 802.11a, channels 48..64 */
- RANGE_PWR(5240, 5320, 23, 6, IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_RADAR),
- /* IEEE 802.11a, channels 100..140 */
- RANGE_PWR(5500, 5700, 30, 6, IEEE80211_CHAN_NO_IBSS |
- IEEE80211_CHAN_RADAR),
-};
+static bool alpha2_equal(char *alpha2_x, char *alpha2_y)
+{
+ if (!alpha2_x || !alpha2_y)
+ return false;
+ if (alpha2_x[0] == alpha2_y[0] &&
+ alpha2_x[1] == alpha2_y[1])
+ return true;
+ return false;
+}
+
+static bool regdom_changed(char *alpha2)
+{
+ if (!cfg80211_regdomain)
+ return true;
+ if (alpha2_equal(cfg80211_regdomain->alpha2, alpha2))
+ return false;
+ return true;
+}
+
+/* This lets us keep regulatory code which is updated on a regulatory
+ * basis in userspace. */
+static int call_crda(const char *alpha2)
+{
+ char country_env[9 + 2] = "COUNTRY=";
+ char *envp[] = {
+ country_env,
+ NULL
+ };
+
+ if (!is_world_regdom((char *) alpha2))
+ printk(KERN_INFO "cfg80211: Calling CRDA for country: %c%c\n",
+ alpha2[0], alpha2[1]);
+ else
+#ifdef CONFIG_WIRELESS_OLD_REGULATORY
+ return -EINVAL;
+#else
+ printk(KERN_INFO "cfg80211: Calling CRDA to update world "
+ "regulatory domain\n");
+#endif
+
+ country_env[8] = alpha2[0];
+ country_env[9] = alpha2[1];
+
+ return kobject_uevent_env(®_pdev->dev.kobj, KOBJ_CHANGE, envp);
+}
+
+/* This has the logic which determines when a new request
+ * should be ignored. */
+static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by,
+ char *alpha2, struct ieee80211_regdomain *rd)
+{
+ struct regulatory_request *last_request = NULL;
-#define REGDOM(_code) \
- { \
- .code = __stringify(_code), \
- .ranges = ieee80211_ ##_code## _channels, \
- .n_ranges = ARRAY_SIZE(ieee80211_ ##_code## _channels), \
+ /* All initial requests are respected */
+ if (list_empty(®ulatory_requests))
+ return 0;
+
+ last_request = list_first_entry(®ulatory_requests,
+ struct regulatory_request, list);
+
+ switch (set_by) {
+ case REGDOM_SET_BY_INIT:
+ return -EINVAL;
+ case REGDOM_SET_BY_CORE:
+ /* Always respect new wireless core hints, should only
+ * come in for updating the world regulatory domain at init
+ * anyway */
+ return 0;
+ case REGDOM_SET_BY_COUNTRY_IE:
+ if (last_request->initiator == set_by) {
+ if (last_request->wiphy != wiphy) {
+ /* Two cards with two APs claiming different
+ * different Country IE alpha2s!
+ * You're special!! */
+ if (!alpha2_equal(last_request->alpha2,
+ cfg80211_regdomain->alpha2)) {
+ /* XXX: Deal with conflict, consider
+ * building a new one out of the
+ * intersection */
+ WARN_ON(1);
+ return -EOPNOTSUPP;
+ }
+ return -EALREADY;
+ }
+ /* Two consecutive Country IE hints on the same wiphy */
+ if (!alpha2_equal(cfg80211_regdomain->alpha2, alpha2))
+ return 0;
+ return -EALREADY;
+ }
+ if (WARN_ON(!is_alpha2_set(alpha2) || !is_an_alpha2(alpha2)),
+ "Invalid Country IE regulatory hint passed "
+ "to the wireless core\n")
+ return -EINVAL;
+ /* We ignore Country IE hints for now, as we haven't yet
+ * added the dot11MultiDomainCapabilityEnabled flag
+ * for wiphys */
+ return 1;
+ case REGDOM_SET_BY_DRIVER:
+ BUG_ON(!wiphy);
+ if (last_request->initiator == set_by) {
+ /* Two separate drivers hinting different things,
+ * this is possible if you have two devices present
+ * on a system with different EEPROM regulatory
+ * readings. XXX: Do intersection, we support only
+ * the first regulatory hint for now */
+ if (last_request->wiphy != wiphy)
+ return -EALREADY;
+ if (rd)
+ return -EALREADY;
+ /* Driver should not be trying to hint different
+ * regulatory domains! */
+ BUG_ON(!alpha2_equal(alpha2,
+ cfg80211_regdomain->alpha2));
+ return -EALREADY;
+ }
+ if (last_request->initiator == REGDOM_SET_BY_CORE)
+ return 0;
+ /* XXX: Handle intersection, and add the
+ * dot11MultiDomainCapabilityEnabled flag to wiphy. For now
+ * we assume the driver has this set to false, following the
+ * 802.11d dot11MultiDomainCapabilityEnabled documentation */
+ if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE)
+ return 0;
+ return 0;
+ case REGDOM_SET_BY_USER:
+ if (last_request->initiator == set_by ||
+ last_request->initiator == REGDOM_SET_BY_CORE)
+ return 0;
+ /* Drivers can use their wiphy's reg_notifier()
+ * to override any information */
+ if (last_request->initiator == REGDOM_SET_BY_DRIVER)
+ return 0;
+ /* XXX: Handle intersection */
+ if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE)
+ return -EOPNOTSUPP;
+ return 0;
+ default:
+ return -EINVAL;
}
+}
-static const struct ieee80211_regdomain ieee80211_regdoms[] = {
- REGDOM(US),
- REGDOM(JP),
- REGDOM(EU),
-};
+static bool __reg_is_valid_request(char *alpha2,
+ struct regulatory_request **request)
+{
+ struct regulatory_request *req;
+ if (list_empty(®ulatory_requests))
+ return false;
+ list_for_each_entry(req, ®ulatory_requests, list) {
+ if (alpha2_equal(req->alpha2, alpha2)) {
+ *request = req;
+ return true;
+ }
+ }
+ return false;
+}
+/* Used by nl80211 before kmalloc'ing our regulatory domain */
+bool reg_is_valid_request(char *alpha2)
+{
+ struct regulatory_request *request = NULL;
+ return __reg_is_valid_request(alpha2, &request);
+}
-static const struct ieee80211_regdomain *get_regdom(void)
+/* Sanity check on a regulatory rule */
+static bool is_valid_reg_rule(struct ieee80211_reg_rule *rule)
{
- static const struct ieee80211_channel_range
- ieee80211_world_channels[] = {
- /* IEEE 802.11b/g, channels 1..11 */
- RANGE_PWR(2412, 2462, 27, 6, 0),
- };
- static const struct ieee80211_regdomain regdom_world = REGDOM(world);
- int i;
+ struct ieee80211_freq_range *freq_range = &rule->freq_range;
+ u32 freq_diff;
+
+ if (freq_range->start_freq_khz == 0 || freq_range->end_freq_khz == 0)
+ return false;
+
+ if (freq_range->start_freq_khz > freq_range->end_freq_khz)
+ return false;
+
+ freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
+
+ if (freq_range->max_bandwidth_khz > freq_diff)
+ return false;
+
+ return true;
+}
+
+static bool is_valid_rd(struct ieee80211_regdomain *rd)
+{
+ struct ieee80211_reg_rule *reg_rule = NULL;
+ unsigned int i;
- for (i = 0; i < ARRAY_SIZE(ieee80211_regdoms); i++)
- if (strcmp(ieee80211_regdom, ieee80211_regdoms[i].code) == 0)
- return &ieee80211_regdoms[i];
+ if (!rd->n_reg_rules)
+ return false;
- return ®dom_world;
+ for (i = 0; i < rd->n_reg_rules; i++) {
+ reg_rule = &rd->reg_rules[i];
+ if (!is_valid_reg_rule(reg_rule))
+ return false;
+ }
+
+ return true;
}
+/* Returns value in KHz */
+static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range,
+ u32 freq)
+{
+ unsigned int i;
+ for (i = 0; i < ARRAY_SIZE(supported_bandwidths); i++) {
+ u32 start_freq_khz = freq - supported_bandwidths[i]/2;
+ u32 end_freq_khz = freq + supported_bandwidths[i]/2;
+ if (start_freq_khz >= freq_range->start_freq_khz &&
+ end_freq_khz <= freq_range->end_freq_khz)
+ return supported_bandwidths[i];
+ }
+ return 0;
+}
-static void handle_channel(struct ieee80211_channel *chan,
- const struct ieee80211_regdomain *rd)
+/* XXX: add support for the rest of enum nl80211_reg_rule_flags, we may
+ * want to just have the channel structure use these */
+static u32 map_regdom_flags(u32 rd_flags)
+{
+ u32 channel_flags = 0;
+ if (rd_flags & NL80211_RRF_PASSIVE_SCAN)
+ channel_flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+ if (rd_flags & NL80211_RRF_NO_IBSS)
+ channel_flags |= IEEE80211_CHAN_NO_IBSS;
+ if (rd_flags & NL80211_RRF_DFS)
+ channel_flags |= IEEE80211_CHAN_RADAR;
+ return channel_flags;
+}
+
+/**
+ * freq_reg_info - get regulatory information for the given frequency
+ * @center_freq: Frequency in KHz for which we want regulatory information for
+ * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one
+ * you can set this to 0. If this frequency is allowed we then set
+ * this value to the maximum allowed bandwidth.
+ * @reg_rule: the regulatory rule which we have for this frequency
+ *
+ * Use this function to get the regulatory rule for a specific frequency.
+ */
+static int freq_reg_info(u32 center_freq, u32 *bandwidth,
+ const struct ieee80211_reg_rule **reg_rule)
{
int i;
- u32 flags = chan->orig_flags;
- const struct ieee80211_channel_range *rg = NULL;
+ u32 max_bandwidth = 0;
- for (i = 0; i < rd->n_ranges; i++) {
- if (rd->ranges[i].start_freq <= chan->center_freq &&
- chan->center_freq <= rd->ranges[i].end_freq) {
- rg = &rd->ranges[i];
+ if (!cfg80211_regdomain)
+ return -EINVAL;
+
+ for (i = 0; i < cfg80211_regdomain->n_reg_rules; i++) {
+ const struct ieee80211_reg_rule *rr;
+ const struct ieee80211_freq_range *fr = NULL;
+ const struct ieee80211_power_rule *pr = NULL;
+
+ rr = &cfg80211_regdomain->reg_rules[i];
+ fr = &rr->freq_range;
+ pr = &rr->power_rule;
+ max_bandwidth = freq_max_bandwidth(fr, center_freq);
+ if (max_bandwidth && *bandwidth <= max_bandwidth) {
+ *reg_rule = rr;
+ *bandwidth = max_bandwidth;
break;
}
}
- if (!rg) {
- /* not found */
+ return !max_bandwidth;
+}
+
+static void handle_channel(struct ieee80211_channel *chan)
+{
+ int r;
+ u32 flags = chan->orig_flags;
+ u32 max_bandwidth = 0;
+ const struct ieee80211_reg_rule *reg_rule = NULL;
+ const struct ieee80211_power_rule *power_rule = NULL;
+
+ r = freq_reg_info(MHZ_TO_KHZ(chan->center_freq),
+ &max_bandwidth, ®_rule);
+
+ if (r) {
flags |= IEEE80211_CHAN_DISABLED;
chan->flags = flags;
return;
}
- chan->flags = flags;
+ power_rule = ®_rule->power_rule;
+
+ chan->flags = flags | map_regdom_flags(reg_rule->flags);
chan->max_antenna_gain = min(chan->orig_mag,
- rg->max_antenna_gain);
+ (int) MBI_TO_DBI(power_rule->max_antenna_gain));
+ chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
if (chan->orig_mpwr)
- chan->max_power = min(chan->orig_mpwr, rg->max_power);
+ chan->max_power = min(chan->orig_mpwr,
+ (int) MBM_TO_DBM(power_rule->max_eirp));
else
- chan->max_power = rg->max_power;
+ chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
}
-static void handle_band(struct ieee80211_supported_band *sband,
- const struct ieee80211_regdomain *rd)
+static void handle_band(struct ieee80211_supported_band *sband)
{
int i;
for (i = 0; i < sband->n_channels; i++)
- handle_channel(&sband->channels[i], rd);
+ handle_channel(&sband->channels[i]);
}
-void wiphy_update_regulatory(struct wiphy *wiphy)
+static void update_all_wiphy_regulatory(enum reg_set_by setby)
{
- enum ieee80211_band band;
- const struct ieee80211_regdomain *rd = get_regdom();
+ struct cfg80211_registered_device *drv;
- for (band = 0; band < IEEE80211_NUM_BANDS; band++)
+ list_for_each_entry(drv, &cfg80211_drv_list, list)
+ wiphy_update_regulatory(&drv->wiphy, setby);
+}
+
+void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby)
+{
+ enum ieee80211_band band;
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
if (wiphy->bands[band])
- handle_band(wiphy->bands[band], rd);
+ handle_band(wiphy->bands[band]);
+ if (wiphy->reg_notifier)
+ wiphy->reg_notifier(wiphy, setby);
+ }
+}
+
+/* Caller must hold &cfg80211_drv_mutex */
+int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by,
+ const char *alpha2, struct ieee80211_regdomain *rd)
+{
+ struct regulatory_request *request;
+ char *rd_alpha2;
+ int r = 0;
+
+ r = ignore_request(wiphy, set_by, (char *) alpha2, rd);
+ if (r)
+ return r;
+
+ if (rd)
+ rd_alpha2 = rd->alpha2;
+ else
+ rd_alpha2 = (char *) alpha2;
+
+ switch (set_by) {
+ case REGDOM_SET_BY_CORE:
+ case REGDOM_SET_BY_COUNTRY_IE:
+ case REGDOM_SET_BY_DRIVER:
+ case REGDOM_SET_BY_USER:
+ request = kzalloc(sizeof(struct regulatory_request),
+ GFP_KERNEL);
+ if (!request)
+ return -ENOMEM;
+
+ request->alpha2[0] = rd_alpha2[0];
+ request->alpha2[1] = rd_alpha2[1];
+ request->initiator = set_by;
+ request->wiphy = wiphy;
+
+ list_add_tail(&request->list, ®ulatory_requests);
+ if (rd)
+ break;
+ r = call_crda(alpha2);
+#ifndef CONFIG_WIRELESS_OLD_REGULATORY
+ if (r)
+ printk(KERN_ERR "cfg80211: Failed calling CRDA\n");
+#endif
+ break;
+ default:
+ r = -ENOTSUPP;
+ break;
+ }
+
+ return r;
+}
+
+/* If rd is not NULL and if this call fails the caller must free it */
+int regulatory_hint(struct wiphy *wiphy, const char *alpha2,
+ struct ieee80211_regdomain *rd)
+{
+ int r;
+ BUG_ON(!rd && !alpha2);
+
+ mutex_lock(&cfg80211_drv_mutex);
+
+ r = __regulatory_hint(wiphy, REGDOM_SET_BY_DRIVER, alpha2, rd);
+ if (r || !rd)
+ goto unlock_and_exit;
+
+ /* If the driver passed a regulatory domain we skipped asking
+ * userspace for one so we can now go ahead and set it */
+ r = set_regdom(rd);
+
+unlock_and_exit:
+ mutex_unlock(&cfg80211_drv_mutex);
+ return r;
+}
+EXPORT_SYMBOL(regulatory_hint);
+
+
+static void print_rd_rules(struct ieee80211_regdomain *rd)
+{
+ unsigned int i;
+ struct ieee80211_reg_rule *reg_rule = NULL;
+ struct ieee80211_freq_range *freq_range = NULL;
+ struct ieee80211_power_rule *power_rule = NULL;
+
+ printk(KERN_INFO "\t(start_freq - end_freq @ bandwidth), "
+ "(max_antenna_gain, max_eirp)\n");
+
+ for (i = 0; i < rd->n_reg_rules; i++) {
+ reg_rule = &rd->reg_rules[i];
+ freq_range = ®_rule->freq_range;
+ power_rule = ®_rule->power_rule;
+
+ /* There may not be documentation for max antenna gain
+ * in certain regions */
+ if (power_rule->max_antenna_gain)
+ printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), "
+ "(%d mBi, %d mBm)\n",
+ freq_range->start_freq_khz,
+ freq_range->end_freq_khz,
+ freq_range->max_bandwidth_khz,
+ power_rule->max_antenna_gain,
+ power_rule->max_eirp);
+ else
+ printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), "
+ "(N/A, %d mBm)\n",
+ freq_range->start_freq_khz,
+ freq_range->end_freq_khz,
+ freq_range->max_bandwidth_khz,
+ power_rule->max_eirp);
+ }
+}
+
+static void print_regdomain(struct ieee80211_regdomain *rd)
+{
+
+ if (is_world_regdom(rd->alpha2))
+ printk(KERN_INFO "cfg80211: World regulatory "
+ "domain updated:\n");
+ else {
+ if (is_unknown_alpha2(rd->alpha2))
+ printk(KERN_INFO "cfg80211: Regulatory domain "
+ "changed to driver built-in settings "
+ "(unknown country)\n");
+ else
+ printk(KERN_INFO "cfg80211: Regulatory domain "
+ "changed to country: %c%c\n",
+ rd->alpha2[0], rd->alpha2[1]);
+ }
+ print_rd_rules(rd);
+}
+
+void print_regdomain_info(struct ieee80211_regdomain *rd)
+{
+ printk(KERN_INFO "cfg80211: Regulatory domain: %c%c\n",
+ rd->alpha2[0], rd->alpha2[1]);
+ print_rd_rules(rd);
+}
+
+#ifdef CONFIG_WIRELESS_OLD_REGULATORY
+
+static bool is_old_static_regdom(struct ieee80211_regdomain *rd)
+{
+ if (rd == &us_regdom || rd == &jp_regdom || rd == &eu_regdom)
+ return true;
+ return false;
+}
+
+/* The old crap never deals with a world regulatory domain, it only
+ * deals with the static regulatory domain passed and if possible
+ * an updated "US" or "JP" regulatory domain. We do however store the
+ * old static regulatory domain in cfg80211_world_regdom for convenience
+ * of use here */
+static void reset_regdomains_static(void)
+{
+ if (!is_old_static_regdom(cfg80211_regdomain))
+ kfree(cfg80211_regdomain);
+ /* This is setting the regdom to the old static regdom */
+ cfg80211_regdomain =
+ (struct ieee80211_regdomain *) cfg80211_world_regdom;
+}
+#else
+static void reset_regdomains(void)
+{
+ if (cfg80211_world_regdom && cfg80211_world_regdom != &world_regdom) {
+ if (cfg80211_world_regdom == cfg80211_regdomain) {
+ kfree(cfg80211_regdomain);
+ } else {
+ kfree(cfg80211_world_regdom);
+ kfree(cfg80211_regdomain);
+ }
+ } else if (cfg80211_regdomain && cfg80211_regdomain != &world_regdom)
+ kfree(cfg80211_regdomain);
+
+ cfg80211_world_regdom = (struct ieee80211_regdomain *) &world_regdom;
+ cfg80211_regdomain = NULL;
+}
+
+/* Dynamic world regulatory domain requested by the wireless
+ * core upon initialization */
+static void update_world_regdomain(struct ieee80211_regdomain *rd)
+{
+ BUG_ON(list_empty(®ulatory_requests));
+
+ reset_regdomains();
+
+ cfg80211_world_regdom = rd;
+ cfg80211_regdomain = rd;
+}
+#endif
+
+static int __set_regdom(struct ieee80211_regdomain *rd)
+{
+ struct regulatory_request *request = NULL;
+
+ /* Some basic sanity checks first */
+
+#ifdef CONFIG_WIRELESS_OLD_REGULATORY
+ /* We ignore the world regdom with the old static regdomains setup
+ * as there is no point to it with satic regulatory definitions :(
+ * Don't worry this shit will be removed soon... */
+ if (is_world_regdom(rd->alpha2))
+ return -EINVAL;
+#else
+ if (is_world_regdom(rd->alpha2)) {
+ if (WARN_ON(!__reg_is_valid_request(rd->alpha2, &request)))
+ return -EINVAL;
+ update_world_regdomain(rd);
+ return 0;
+ }
+#endif
+
+ if (!is_alpha2_set(rd->alpha2) && !is_an_alpha2(rd->alpha2) &&
+ !is_unknown_alpha2(rd->alpha2))
+ return -EINVAL;
+
+ if (list_empty(®ulatory_requests))
+ return -EINVAL;
+
+#ifdef CONFIG_WIRELESS_OLD_REGULATORY
+ /* Static "US" and "JP" will be overridden, but just once */
+ if (!is_old_static_regdom(cfg80211_regdomain) &&
+ !regdom_changed(rd->alpha2))
+ return -EINVAL;
+#else
+ if (!regdom_changed(rd->alpha2))
+ return -EINVAL;
+#endif
+
+ /* Now lets set the regulatory domain, update all driver channels
+ * and finally inform them of what we have done, in case they want
+ * to review or adjust their own settings based on their own
+ * internal EEPROM data */
+
+ if (WARN_ON(!__reg_is_valid_request(rd->alpha2, &request)))
+ return -EINVAL;
+
+#ifdef CONFIG_WIRELESS_OLD_REGULATORY
+ reset_regdomains_static();
+#else
+ reset_regdomains();
+#endif
+
+ /* Country IE parsing coming soon */
+ switch (request->initiator) {
+ case REGDOM_SET_BY_CORE:
+ case REGDOM_SET_BY_DRIVER:
+ case REGDOM_SET_BY_USER:
+ if (!is_valid_rd(rd)) {
+ printk(KERN_ERR "cfg80211: Invalid "
+ "regulatory domain detected:\n");
+ print_regdomain_info(rd);
+ return -EINVAL;
+ }
+ break;
+ case REGDOM_SET_BY_COUNTRY_IE: /* Not yet */
+ WARN_ON(1);
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ /* Tada! */
+ cfg80211_regdomain = rd;
+ request->granted = 1;
+
+ return 0;
+}
+
+
+/* Use this call to set the current regulatory domain. Conflicts with
+ * multiple drivers can be ironed out later. Caller must've already
+ * kmalloc'd the rd structure. If this calls fails you should kfree()
+ * the passed rd. Caller must hold cfg80211_drv_mutex */
+int set_regdom(struct ieee80211_regdomain *rd)
+{
+ struct regulatory_request *this_request = NULL, *prev_request = NULL;
+ int r;
+
+ if (!list_empty(®ulatory_requests))
+ prev_request = list_first_entry(®ulatory_requests,
+ struct regulatory_request, list);
+
+ /* Note that this doesn't update the wiphys, this is done below */
+ r = __set_regdom(rd);
+ if (r)
+ return r;
+
+ BUG_ON((!__reg_is_valid_request(rd->alpha2, &this_request)));
+
+ /* The initial standard core update of the world regulatory domain, no
+ * need to keep that request info around if it didn't fail. */
+ if (is_world_regdom(rd->alpha2) &&
+ this_request->initiator == REGDOM_SET_BY_CORE &&
+ this_request->granted) {
+ list_del(&this_request->list);
+ kfree(this_request);
+ this_request = NULL;
+ }
+
+ /* Remove old requests, we only leave behind the last one */
+ if (prev_request) {
+ list_del(&prev_request->list);
+ kfree(prev_request);
+ prev_request = NULL;
+ }
+
+ /* This would make this whole thing pointless */
+ BUG_ON(rd != cfg80211_regdomain);
+
+ /* update all wiphys now with the new established regulatory domain */
+ update_all_wiphy_regulatory(this_request->initiator);
+
+ print_regdomain(rd);
+
+ return r;
+}
+
+int regulatory_init(void)
+{
+ reg_pdev = platform_device_register_simple("regulatory", 0, NULL, 0);
+ if (IS_ERR(reg_pdev))
+ return PTR_ERR(reg_pdev);
+ return 0;
+}
+
+void regulatory_exit(void)
+{
+ struct regulatory_request *req, *req_tmp;
+ mutex_lock(&cfg80211_drv_mutex);
+#ifdef CONFIG_WIRELESS_OLD_REGULATORY
+ reset_regdomains_static();
+#else
+ reset_regdomains();
+#endif
+ list_for_each_entry_safe(req, req_tmp, ®ulatory_requests, list) {
+ list_del(&req->list);
+ kfree(req);
+ }
+ platform_device_unregister(reg_pdev);
+ mutex_unlock(&cfg80211_drv_mutex);
}
--- /dev/null
+#ifndef __NET_WIRELESS_REG_H
+#define __NET_WIRELESS_REG_H
+
+extern const struct ieee80211_regdomain world_regdom;
+#ifdef CONFIG_WIRELESS_OLD_REGULATORY
+extern const struct ieee80211_regdomain us_regdom;
+extern const struct ieee80211_regdomain jp_regdom;
+extern const struct ieee80211_regdomain eu_regdom;
+#endif
+
+extern struct ieee80211_regdomain *cfg80211_regdomain;
+extern struct ieee80211_regdomain *cfg80211_world_regdom;
+extern struct list_head regulatory_requests;
+
+struct regdom_last_setby {
+ struct wiphy *wiphy;
+ u8 initiator;
+};
+
+/* wiphy is set if this request's initiator is REGDOM_SET_BY_DRIVER */
+struct regulatory_request {
+ struct list_head list;
+ struct wiphy *wiphy;
+ int granted;
+ enum reg_set_by initiator;
+ char alpha2[2];
+};
+
+bool is_world_regdom(char *alpha2);
+bool reg_is_valid_request(char *alpha2);
+
+int set_regdom(struct ieee80211_regdomain *rd);
+int __regulatory_hint_alpha2(struct wiphy *wiphy, enum reg_set_by set_by,
+ const char *alpha2);
+
+int regulatory_init(void);
+void regulatory_exit(void);
+
+void print_regdomain_info(struct ieee80211_regdomain *);
+
+/* If a char is A-Z */
+#define IS_ALPHA(letter) (letter >= 65 && letter <= 90)
+
+#endif /* __NET_WIRELESS_REG_H */
projects / openwrt / staging / blogic.git / commitdiff