export CONFIG_COMPAT_MAC80211_DRIVER_API_TRACER=y
endif #CONFIG_COMPAT_KERNEL_2_6_33
-# CONFIG_MAC80211_DEBUGFS=y
-# CONFIG_MAC80211_NOINLINE=y
-# CONFIG_MAC80211_VERBOSE_DEBUG=y
-# CONFIG_MAC80211_HT_DEBUG=y
-# CONFIG_MAC80211_TKIP_DEBUG=y
-# CONFIG_MAC80211_IBSS_DEBUG=y
-# CONFIG_MAC80211_VERBOSE_PS_DEBUG=y
-# CONFIG_MAC80211_VERBOSE_MPL_DEBUG=y
-# CONFIG_MAC80211_VERBOSE_MHWMP_DEBUG=y
-# CONFIG_MAC80211_VERBOSE_TDLS_DEBUG
-# CONFIG_MAC80211_DEBUG_COUNTERS=y
+# export CONFIG_MAC80211_DEBUGFS=y
+# export CONFIG_MAC80211_NOINLINE=y
+# export CONFIG_MAC80211_VERBOSE_DEBUG=y
+# export CONFIG_MAC80211_HT_DEBUG=y
+# export CONFIG_MAC80211_TKIP_DEBUG=y
+# export CONFIG_MAC80211_IBSS_DEBUG=y
+# export CONFIG_MAC80211_VERBOSE_PS_DEBUG=y
+# export CONFIG_MAC80211_VERBOSE_MPL_DEBUG=y
+# export CONFIG_MAC80211_VERBOSE_MHWMP_DEBUG=y
+# export CONFIG_MAC80211_VERBOSE_TDLS_DEBUG
+# export CONFIG_MAC80211_DEBUG_COUNTERS=y
# choose between pid and minstrel as default rate control algorithm
export CONFIG_MAC80211_RC_DEFAULT=minstrel_ht
export CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID=y
+# export CONFIG_MAC80211_RC_DEFAULT_PID=y
# This is the one used by our compat-wireless net/mac80211/rate.c
# in case you have and old kernel which is overriding this to pid.
export CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel_ht
export CONFIG_CFG80211=m
export CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS=y
-# CONFIG_NL80211_TESTMODE=y
-# CONFIG_CFG80211_DEVELOPER_WARNINGS=y
-# CONFIG_CFG80211_REG_DEBUG=y
-# CONFIG_CFG80211_INTERNAL_REGDB=y
+# export CONFIG_CFG80211_DEBUGFS=y
+# export CONFIG_NL80211_TESTMODE=y
+# export CONFIG_CFG80211_DEVELOPER_WARNINGS=y
+# export CONFIG_CFG80211_REG_DEBUG=y
+# export CONFIG_CFG80211_INTERNAL_REGDB=y
# See below for wext stuff
export CONFIG_LIB80211=m
export CONFIG_LIB80211_CRYPT_WEP=m
export CONFIG_LIB80211_CRYPT_CCMP=m
export CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG=y
+# export CONFIG_LIB80211_DEBUG=y
export CONFIG_BT=m
export CONFIG_BT_RFCOMM=m
# function on struct wiphy. This struct is shipped with compat-wireless
# and changes from kernel version to version. We are using the
# wireless_handlers attribute which will be activated by
-# CONFIG_WIRELESS_EXT.
+# export CONFIG_WIRELESS_EXT.
ifdef CONFIG_WIRELESS_EXT
export CONFIG_CFG80211_WEXT=y
else #CONFIG_CFG80211_WEXT
export CONFIG_MAC80211_HWSIM=m
export CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG=y
-# CONFIG_ATH5K_TRACER=y
-# CONFIG_ATH5K_AHB=y
+# export CONFIG_ATH5K_DEBUG=y
+# export CONFIG_ATH5K_TRACER=y
+# export CONFIG_ATH5K_AHB=y
export CONFIG_ATH9K=m
export CONFIG_ATH9K_HW=m
export CONFIG_ATH9K_COMMON=m
-# CONFIG_ATH9K_DEBUGFS=y
-# CONFIG_ATH9K_AHB=y
-# CONFIG_ATH9K_PKTLOG=y
+# export CONFIG_ATH9K_DEBUGFS=y
+# export CONFIG_ATH9K_AHB=y
+# export CONFIG_ATH9K_PKTLOG=y
# Disable this to get minstrel as default, we leave the ath9k
# rate control algorithm as the default for now as that is also
export CONFIG_IWLWIFI=m
export CONFIG_IWLWIFI_P2P=y
-# CONFIG_IWLWIFI_DEBUG=y
-# CONFIG_IWLWIFI_DEBUGFS=y
-# CONFIG_IWLWIFI_DEVICE_TRACING=y
-# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y
+# export CONFIG_IWLWIFI_DEBUG=y
+# export CONFIG_IWLWIFI_DEBUGFS=y
+# export CONFIG_IWLWIFI_DEVICE_TRACING=y
+# export CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y
export CONFIG_IWLEGACY=m
export CONFIG_COMPAT_IWL4965=m
export CONFIG_IWL3945=m
-# CONFIG_IWLEGACY_DEBUG=y
-# CONFIG_IWLEGACY_DEBUGFS=y
+# export CONFIG_IWLEGACY_DEBUG=y
+# export CONFIG_IWLEGACY_DEBUGFS=y
export CONFIG_B43=m
export CONFIG_B43_PHY_LP=y
export CONFIG_B43_PHY_N=y
export CONFIG_B43_PHY_HT=y
-# CONFIG_B43_PHY_LCN=y
-# CONFIG_B43_DEBUG=y
+# export CONFIG_B43_PHY_LCN=y
+# export CONFIG_B43_DEBUG=y
export CONFIG_B43LEGACY=m
export CONFIG_B43LEGACY_HWRNG=y
ifdef CONFIG_MAC80211_LEDS
export CONFIG_B43LEGACY_LEDS=y
endif #CONFIG_MAC80211_LEDS
-# CONFIG_B43LEGACY_DEBUG=y
+# export CONFIG_B43LEGACY_DEBUG=y
export CONFIG_B43LEGACY_DMA=y
export CONFIG_B43LEGACY_PIO=y
ifdef CONFIG_WIRELESS_EXT
# The Intel ipws
export CONFIG_LIBIPW=m
-# CONFIG_LIBIPW_DEBUG=y
+# export CONFIG_LIBIPW_DEBUG=y
export CONFIG_IPW2100=m
export CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG=y
+# export CONFIG_IPW2100_DEBUG=y
export CONFIG_IPW2200=m
export CONFIG_IPW2200_MONITOR=y
export CONFIG_IPW2200_RADIOTAP=y
export CONFIG_IPW2200_PROMISCUOUS=y
export CONFIG_IPW2200_QOS=y
-# CONFIG_IPW2200_DEBUG=y
+# export CONFIG_IPW2200_DEBUG=y
# The above enables use a second interface prefixed 'rtap'.
# Example usage:
#
ifdef CONFIG_PCMCIA
export CONFIG_SSB_PCMCIAHOST=y
endif #CONFIG_PCMCIA
-# CONFIG_SSB_DEBUG=y
+# export CONFIG_SSB_DEBUG=y
export CONFIG_SSB_DRIVER_PCICORE=y
export CONFIG_B43_SSB=y
endif #CONFIG_SSB
export CONFIG_BCMA=m
export CONFIG_BCMA_BLOCKIO=y
export CONFIG_BCMA_HOST_PCI=y
-# CONFIG_BCMA_DEBUG=y
+# export CONFIG_BCMA_DEBUG=y
export CONFIG_B43_BCMA=y
export CONFIG_B43_BCMA_EXTRA=y
ifdef CONFIG_USB
ifndef CONFIG_COMPAT_KERNEL_2_6_29
export CONFIG_COMPAT_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG=y
+# export CONFIG_ZD1211RW_DEBUG=y
endif #CONFIG_COMPAT_KERNEL_2_6_29
# Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
ifdef CONFIG_MAC80211_LEDS
export CONFIG_CARL9170_LEDS=y
endif #CONFIG_MAC80211_LEDS
-# CONFIG_CARL9170_DEBUGFS=y
+# export CONFIG_CARL9170_DEBUGFS=y
export CONFIG_CARL9170_WPC=y
endif #CONFIG_COMPAT_KERNEL_2_6_29
export CONFIG_COMPAT_USB_URB_THREAD_FIX=y
export CONFIG_ATH9K_HTC=m
-# CONFIG_ATH9K_HTC_DEBUGFS=y
+# export CONFIG_ATH9K_HTC_DEBUGFS=y
# RT2500USB does not require firmware
export CONFIG_RT2500USB=m
endif #CONFIG_COMPAT_KERNEL_2_6_32
export CONFIG_IWM=m
-# CONFIG_IWM_DEBUG=y
-# CONFIG_IWM_TRACING=y
+# export CONFIG_IWM_DEBUG=y
+# export CONFIG_IWM_TRACING=y
export CONFIG_BT_HCIBTSDIO=m
export CONFIG_BT_MRVL_SDIO=m
ifndef CONFIG_COMPAT_KERNEL_2_6_27
export CONFIG_ATH6KL=m
-# CONFIG_ATH6KL_DEBUG=y
+# export CONFIG_ATH6KL_DEBUG=y
endif #CONFIG_COMPAT_KERNEL_2_6_27
ifndef CONFIG_COMPAT_KERNEL_2_6_29
export CONFIG_RT2800_LIB=m
export CONFIG_RT2X00_LIB_FIRMWARE=y
export CONFIG_RT2X00_LIB_CRYPTO=y
-# CONFIG_RT2X00_LIB_SOC=y
+# export CONFIG_RT2X00_LIB_SOC=y
ifdef CONFIG_COMPAT_KERNEL_2_6_25
export CONFIG_RT2X00_LIB_LEDS=n
else #CONFIG_COMPAT_KERNEL_2_6_25
export CONFIG_RT2X00_LIB_LEDS=y
endif #CONFIG_LEDS_CLASS
endif #CONFIG_COMPAT_KERNEL_2_6_25
-# CONFIG_RT2X00_DEBUG=y
-# CONFIG_RT2X00_LIB_DEBUGFS=y
+# export CONFIG_RT2X00_DEBUG=y
+# export CONFIG_RT2X00_LIB_DEBUGFS=y
endif
# p54
# Atheros
export CONFIG_ATH_COMMON=m
-# CONFIG_ATH_DEBUG=y
+# export CONFIG_ATH_DEBUG=y
export CONFIG_BRCMUTIL=m
-# CONFIG_BRCMDBG=y
+# export CONFIG_BRCMDBG=y
ifdef CONFIG_CRC7
export CONFIG_WL1251=m
export CONFIG_LIBERTAS_THINFIRM=m
export CONFIG_LIBERTAS=m
export CONFIG_LIBERTAS_MESH=y
-# CONFIG_LIBERTAS_DEBUG=y
+# export CONFIG_LIBERTAS_DEBUG=y
endif
endif #CONFIG_COMPAT_KERNEL_2_6_27
projects / openwrt / staging / blogic.git / commitdiff