ar9344_openmesh_mr600-v1.dts:40.10-44.5: Warning (gpios_property):
/leds-ath9k/wifi2g: Missing property '#gpio-cells' in node
/ahb/pcie-controller@
180c0000/wifi@0,0 or bad phandle
=> added gpio-controller + #gpio-cells
qca955x_zyxel_nbg6x16.dtsi:121.3-13: Warning (reg_format):
/ahb/usb@
1b000000/port@1:reg: property has invalid length (4 bytes)
(#address-cells == 2, #size-cells == 1)
../dts/qca955x_zyxel_nbg6x16.dtsi:131.3-13: Warning (reg_format):
/ahb/usb@
1b400000/port@1:reg: property has invalid length (4 bytes)
(#address-cells == 2, #size-cells == 1)
qca955x_zyxel_nbg6x16.dtsi:120.20-123.4: Warning (avoid_default_addr_size):
/ahb/usb@
1b000000/port@1: Relying on default #address-cells value
=> ath79's usb-nodes are missing the address- and size-cells properties.
These are needed for usb led trigger support.
ar7242_ubnt_sw.dtsi:54.4-14: Warning (reg_format): /gpio_spi/gpio_spi@0:reg:
property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
=> the #address-cells and #size-cells had to be nudged.
qca9531_dlink_dch-g020-a1.dts:19.6-39.4: Warning (i2c_bus_bridge):
/i2c: incorrect #size-cells for I2C bus
=> #size-cells = <0>;
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
has-synopsys-hc-bug;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
usb1: usb@1c000000 {
phys = <&usb_phy>;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
spi: spi@1f000000 {
phys = <&usb_phy>;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
phys = <&usb_phy>;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
phys = <&usb_phy>;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
ethernet-switch@1e {
compatible = "brcm,bcm53128";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x1e>;
ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port0@0 {
reg = <0>;
label = "lan1";
gpio_spi {
compatible = "spi-gpio";
- #address-cells = <0x1>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <0>;
sck-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
phys = <&usb_phy>;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
spi: spi@1f000000 {
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
mac-address-increment = <8>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
};
};
phys = <&usb_phy>;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
nand: nand@1b000200 {
i2c {
compatible = "i2c-gpio";
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
sda-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
phys = <&usb_phy>;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
spi: spi@1f000000 {
phys = <&usb_phy0>;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
usb1: usb@1b400000 {
phys = <&usb_phy1>;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
nand: nand@1b800200 {
phys = <&usb_phy0>;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
usb1: usb@1b400000 {
phys = <&usb_phy1>;
status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
};
spi: spi@1f000000 {