ar71xx: Add eTactica EG-200 support

EG-200 is a DIN rail mountable device with one ethernet port, wifi,
an RS-485 port, and an internal USB attached uSD card reader.

Two leds, "modbus" and "etactica" are managed by userspace applications
in factory firmware.

Flash instruction:
    Original firmware is based on OpenWrt.
    Use sysupgrade image directly in vendor GUI.

Signed-off-by: Karl Palsson <karlp@etactica.com>

diff --git a/package/boot/uboot-envtools/files/ar71xx b/package/boot/uboot-envtools/files/ar71xx
index 66eaeb0df75b577e580352c887bc949d7f8a531a..cc742e435b5a38e9b075ae2c5a6ba54a93c4c868 100644 (file)
--- a/package/boot/uboot-envtools/files/ar71xx
+++ b/package/boot/uboot-envtools/files/ar71xx
@@ -48,6 +48,7 @@ om5p-ac|\
 om5p-acv2|\
 om5p-an|\
 r36a|\
+rme-eg200|\
 sr3200|\
 tube2h|\
 wndr3700|\

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index c45376f9e4584ab757514f3903e3a281bcac0ea3..6711fb4ce9aa1fcbc7925e186dfadb04319f411e 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -623,6 +623,12 @@ re450)
        ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt"
        ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
        ;;
+rme-eg200)
+        ucidef_set_led_netdev "wan" "WAN" "eg200:red:eth0" "eth0"
+        ucidef_set_led_wlan "wlan" "WLAN" "eg200:red:wlan" "phy0tpt"
+        ucidef_set_led_oneshot "modbus" "Modbus" "eg200:red:modbus" "100" "33"
+        ucidef_set_led_default "etactica" "etactica" "eg200:red:etactica" "ignore"
+        ;;
 rocket-m-ti)
        ucidef_set_led_rssi "rssiverylow" "RSSIVERYLOW" "ubnt:green:link1" "wlan0" "1" "100" "0" "13"
        ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:green:link2" "wlan0" "26" "100" "-25" "13"

diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index b208f38b5ea99c427dacf719d264cfb1a94ba2db..f131b3b633e68f92cfc84adbec0714f45025efe9 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -262,7 +262,8 @@ ar71xx_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "3:wan" "4:lan"
                ;;
-       cap324)
+       cap324|\
+       rme-eg200)
                ucidef_set_interface_lan "eth0" "dhcp"
                ;;
        cpe210|\

diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 7c7a0e267406207a55a3ccdc4cdb63b48814b88b..a255b83802198af1afd31f581882dc3e5ac59b09 100755 (executable)
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -670,6 +670,9 @@ ar71xx_board_detect() {
        *"ESR900")
                name="esr900"
                ;;
+       *"eTactica EG-200")
+               name="rme-eg200"
+               ;;
        *"FRITZ!WLAN Repeater 300E")
                name="fritz300e"
                ;;

diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 946a8860712a0ff408ab1ba9674f750db6cc3c4f..8f56d1a8f60abbfd719e6bcf40416a4d98542e1b 100755 (executable)
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -262,6 +262,7 @@ platform_check_image() {
        pqi-air-pen|\
        r36a|\
        r602n|\
+       rme-eg200|\
        rocket-m|\
        rocket-m-ti|\
        rocket-m-xw|\

diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 447ab01dae27035b5cd6b09e62b87f1312ac0c37..068b83ce8af8e41ef061f86c4bb629bb0fee9b44 100644 (file)
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -170,6 +170,7 @@ CONFIG_ATH79=y
 # CONFIG_ATH79_MACH_RBSXTLITE is not set
 # CONFIG_ATH79_MACH_RE355 is not set
 # CONFIG_ATH79_MACH_RE450 is not set
+# CONFIG_ATH79_MACH_RME_EG200 is not set
 # CONFIG_ATH79_MACH_RUT9XX is not set
 # CONFIG_ATH79_MACH_RW2458N is not set
 # CONFIG_ATH79_MACH_SC1750 is not set

diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9
index e5fce99b19818fb2015bcfb34d9759097d535827..e495f6b4c26da3a8c872056aba15d040a94b7989 100644 (file)
--- a/target/linux/ar71xx/config-4.9
+++ b/target/linux/ar71xx/config-4.9
@@ -168,6 +168,7 @@ CONFIG_ATH79=y
 # CONFIG_ATH79_MACH_RBSXTLITE is not set
 # CONFIG_ATH79_MACH_RE355 is not set
 # CONFIG_ATH79_MACH_RE450 is not set
+# CONFIG_ATH79_MACH_RME_EG200 is not set
 # CONFIG_ATH79_MACH_RUT9XX is not set
 # CONFIG_ATH79_MACH_RW2458N is not set
 # CONFIG_ATH79_MACH_SC1750 is not set

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index eda1e4002b83870c84abeb40feb36551b87e7912..248bffb1f5cb91c653a49ce9c23ae92dfd34ca38 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1325,6 +1325,16 @@ config ATH79_MACH_RE450
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_RME_EG200
+       bool "eTactica EG200 board supprt"
+       select SOC_AR933X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_RUT9XX
        bool "Teltonika RUT900 series support"
        select SOC_AR934X

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 27ef57d1675312163b915295c063b0309e153f9e..98d4677a5f711da6bf6974f54e6ee0e522bd63ed 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -179,6 +179,7 @@ obj-$(CONFIG_ATH79_MACH_RBSPI)                      += mach-rbspi.o
 obj-$(CONFIG_ATH79_MACH_RBSXTLITE)             += mach-rbsxtlite.o
 obj-$(CONFIG_ATH79_MACH_RE355)                 += mach-re450.o
 obj-$(CONFIG_ATH79_MACH_RE450)                 += mach-re450.o
+obj-$(CONFIG_ATH79_MACH_RME_EG200)             += mach-rme-eg200.o
 obj-$(CONFIG_ATH79_MACH_RUT9XX)                        += mach-rut9xx.o
 obj-$(CONFIG_ATH79_MACH_RW2458N)               += mach-rw2458n.o
 obj-$(CONFIG_ATH79_MACH_SC1750)                        += mach-sc1750.o

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c
new file mode 100644 (file)
index 0000000..332b078
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c
@@ -0,0 +1,99 @@
+/*
+ * eTactica EG-200 board, based on 8devices Carambola2 module
+ *
+ * Copyright (C) 2015 Karl Palsson <karlp@etactica.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define RME_EG200_GPIO_LED_WLAN                        0
+#define RME_EG200_GPIO_LED_ETH0                        13
+#define RME_EG200_GPIO_LED_ETACTICA            15
+#define RME_EG200_GPIO_LED_MODBUS              16
+
+#define RME_EG200_GPIO_BTN_RESTORE             11
+
+#define RME_EG200_KEYS_POLL_INTERVAL           20      /* msecs */
+#define RME_EG200_KEYS_DEBOUNCE_INTERVAL       (3 * RME_EG200_KEYS_POLL_INTERVAL)
+
+#define RME_EG200_MAC0_OFFSET                  0x0000
+#define RME_EG200_CALDATA_OFFSET               0x1000
+#define RME_EG200_WMAC_MAC_OFFSET              0x1002
+
+static struct gpio_led rme_eg200_leds_gpio[] __initdata = {
+       {
+               .name           = "eg200:red:wlan",
+               .gpio           = RME_EG200_GPIO_LED_WLAN,
+               .active_low     = 1,
+       }, {
+               .name           = "eg200:red:eth0",
+               .gpio           = RME_EG200_GPIO_LED_ETH0,
+               .active_low     = 1,
+       }, {
+               .name           = "eg200:red:etactica",
+               .gpio           = RME_EG200_GPIO_LED_ETACTICA,
+               .active_low     = 0,
+       }, {
+               .name           = "eg200:red:modbus",
+               .gpio           = RME_EG200_GPIO_LED_MODBUS,
+               .active_low     = 0,
+       }
+};
+
+static struct gpio_keys_button rme_eg200_keys[] __initdata = {
+       {
+               .desc           = "restore button",
+               .type           = EV_KEY,
+               .code           = KEY_WPS_BUTTON,
+               .debounce_interval = RME_EG200_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = RME_EG200_GPIO_BTN_RESTORE,
+               .active_low     = 1,
+       },
+};
+
+static void __init rme_eg200_setup(void)
+{
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+       ath79_register_m25p80(NULL);
+       ath79_register_wmac(art + RME_EG200_CALDATA_OFFSET,
+                           art + RME_EG200_WMAC_MAC_OFFSET);
+
+       ath79_setup_ar933x_phy4_switch(true, true);
+
+       ath79_init_mac(ath79_eth0_data.mac_addr, art + RME_EG200_MAC0_OFFSET, 0);
+
+       ath79_register_mdio(0, 0x0);
+
+       /* WAN port */
+       ath79_register_eth(0);
+
+       ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+                               AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+                               AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+                               AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+                               AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(rme_eg200_leds_gpio),
+                                rme_eg200_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, RME_EG200_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(rme_eg200_keys),
+                                       rme_eg200_keys);
+       ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_RME_EG200, "RME-EG200", "eTactica EG-200",
+               rme_eg200_setup);

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 27269e54d6ed42120b37e419eb77ba9db67f54e6..497d794e01c9315c68ca3cb828d6c2b9cbb1ed28 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -209,6 +209,7 @@ enum ath79_mach_type {
        ATH79_MACH_RB_SXTLITE5ND,               /* Mikrotik RouterBOARD SXT Lite 5nD */
        ATH79_MACH_RE355,                       /* TP-LINK RE355 */
        ATH79_MACH_RE450,                       /* TP-LINK RE450 */
+       ATH79_MACH_RME_EG200,                   /* eTactica EG200 */
        ATH79_MACH_RUT9XX,                      /* Teltonika RUT900 series */
        ATH79_MACH_RW2458N,                     /* Redwave RW2458N */
        ATH79_MACH_SC1750,                      /* Abicom SC1750 */

diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default
index 892d33dc8ce43dfad60d652517545c38918e37f4..9caf29aa5fa150de5a4d1285e11a85488f258cc4 100644 (file)
--- a/target/linux/ar71xx/generic/config-default
+++ b/target/linux/ar71xx/generic/config-default
@@ -127,6 +127,7 @@ CONFIG_ATH79_MACH_R36A=y
 CONFIG_ATH79_MACH_R602N=y
 CONFIG_ATH79_MACH_RE355=y
 CONFIG_ATH79_MACH_RE450=y
+CONFIG_ATH79_MACH_RME_EG200=y
 CONFIG_ATH79_MACH_RUT9XX=y
 CONFIG_ATH79_MACH_RW2458N=y
 CONFIG_ATH79_MACH_SC1750=y

diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index 1e35f1a84fe4f46273358253b7de1f4f0326da96..eeefde0a9807271d15fd368ff8d4f8dd42b35f7d 100644 (file)
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -310,6 +310,19 @@ define Device/ew-dorin-router
 endef
 TARGET_DEVICES += ew-dorin-router
 
+define Device/rme-eg200
+  DEVICE_TITLE := eTactica EG-200
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-oneshot \
+       kmod-usb-serial kmod-usb-serial-ftdi \
+       kmod-usb-storage \
+       kmod-fs-ext4
+  BOARDNAME = RME-EG200
+  IMAGE_SIZE = 16000k
+  CONSOLE = ttyATH0,115200
+  MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += rme-eg200
+
 define Device/weio
   DEVICE_TITLE := WeIO
   DEVICE_PACKAGES := kmod-usb-core kmod-usb2