--- /dev/null
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=u-boot
+PKG_VERSION:=2013.10
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
+PKG_SOURCE_URL:= \
+ http://mirror2.openwrt.org/sources \
+ ftp://ftp.denx.de/pub/u-boot
+PKG_MD5SUM:=a076a044b64371edc52f7e562b13f6b2
+PKG_TARGETS:=bin
+
+include $(INCLUDE_DIR)/package.mk
+
+define uboot/Default
+ TITLE:=
+ CONFIG:=
+ IMAGE:=
+endef
+
+define uboot/omap4_panda
+ TITLE:=U-Boot for the Pandaboard
+endef
+
+define uboot/am335x_evm
+ TITLE:=U-Boot for the AM335x EVM
+endef
+
+define uboot/omap3_overo
+ TITLE:=U-Boot for the Gumstix Overo
+endef
+
+define uboot/omap3_beagle
+ TITLE:=U-Boot for the BeagleBoard
+endef
+
+UBOOTS:=omap4_panda am335x_evm omap3_overo omap3_beagle
+
+define Package/uboot/template
+define Package/uboot-omap4-$(1)
+ SECTION:=boot
+ CATEGORY:=Boot Loaders
+ DEPENDS:=@TARGET_omap4
+ TITLE:=$(2)
+ URL:=http://www.denx.de/wiki/U-Boot
+ VARIANT:=$(1)
+endef
+endef
+
+define BuildUBootPackage
+ $(eval $(uboot/Default))
+ $(eval $(uboot/$(1)))
+ $(call Package/uboot/template,$(1),$(TITLE))
+endef
+
+ifdef BUILD_VARIANT
+$(eval $(call uboot/$(BUILD_VARIANT)))
+UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
+UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.img)
+endif
+
+define Build/Configure
+ $(MAKE) -C $(PKG_BUILD_DIR) \
+ $(UBOOT_CONFIG)_config
+endef
+
+define Build/Compile
+ $(MAKE) -C $(PKG_BUILD_DIR) \
+ CROSS_COMPILE=$(TARGET_CROSS)
+endef
+
+define Package/uboot/install/default
+ $(INSTALL_DIR) $(BIN_DIR)/uboot-$(BOARD)-$(1)
+ $(CP) $(PKG_BUILD_DIR)/u-boot.img $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-u-boot.img
+ $(CP) $(PKG_BUILD_DIR)/MLO $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-MLO
+endef
+
+define Package/uboot/install/template
+define Package/uboot-omap4-$(1)/install
+ $(call Package/uboot/install/default,$(2))
+endef
+endef
+
+$(foreach u,$(UBOOTS), \
+ $(eval $(call Package/uboot/install/template,$(u),$(u))) \
+)
+
+$(foreach u,$(UBOOTS), \
+ $(eval $(call BuildUBootPackage,$(u))) \
+ $(eval $(call BuildPackage,uboot-omap4-$(u))) \
+)
+++ /dev/null
-#
-# Copyright (C) 2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=u-boot
-PKG_VERSION:=2010.12
-PKG_RELEASE:=1
-
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:= \
- http://mirror2.openwrt.org/sources \
- ftp://ftp.denx.de/pub/u-boot
-PKG_MD5SUM:=
-PKG_TARGETS:=bin
-
-include $(INCLUDE_DIR)/package.mk
-
-define uboot/Default
- TITLE:=
- CONFIG:=
- IMAGE:=
-endef
-
-define uboot/omap3_overo
- TITLE:=U-boot for the gumstix board
-endef
-
-UBOOTS:=omap3_overo
-
-define Package/uboot/template
-define Package/uboot-omap35xx-$(1)
- SECTION:=boot
- CATEGORY:=Boot Loaders
- DEPENDS:=@TARGET_omap35xx
- TITLE:=$(2)
- URL:=http://www.denx.de/wiki/U-Boot
- VARIANT:=$(1)
-endef
-endef
-
-define BuildUbootPackage
- $(eval $(uboot/Default))
- $(eval $(uboot/$(1)))
- $(call Package/uboot/template,$(1),$(TITLE))
-endef
-
-
-ifdef BUILD_VARIANT
-$(eval $(call uboot/$(BUILD_VARIANT)))
-UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
-UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
-endif
-
-define Build/Prepare
- $(call Build/Prepare/Default)
- $(CP) ./files/* $(PKG_BUILD_DIR)
- find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
-endef
-
-define Build/Configure
- $(MAKE) -C $(PKG_BUILD_DIR) \
- $(UBOOT_CONFIG)_config
-endef
-
-define Build/Compile
- $(MAKE) -C $(PKG_BUILD_DIR) \
- CROSS_COMPILE=$(TARGET_CROSS)
-endef
-
-define Package/uboot/install/template
-define Package/uboot-omap35xx-$(1)/install
- $(INSTALL_DIR) $$(1)
- $(CP) $(PKG_BUILD_DIR)/u-boot.bin $(BIN_DIR)/$(2)
-endef
-endef
-
-$(foreach u,$(UBOOTS), \
- $(eval $(call Package/uboot/install/template,$(u),openwrt-$(BOARD)-$(u)-u-boot.bin)) \
-)
-
-$(foreach u,$(UBOOTS), \
- $(eval $(call BuildUbootPackage,$(u))) \
- $(eval $(call BuildPackage,uboot-omap35xx-$(u))) \
-)
+++ /dev/null
-/*
- * Configuration settings for the Gumstix Overo board.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP34XX 1 /* which is a 34XX */
-#define CONFIG_OMAP3430 1 /* which is in a 3430 */
-#define CONFIG_OMAP3_OVERO 1 /* working with overo */
-
-#define CONFIG_SDRC /* The chip has SDRC controller */
-
-#include <asm/arch/cpu.h> /* get chip and board defs */
-#include <asm/arch/omap3.h>
-
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO 1
-#define CONFIG_DISPLAY_BOARDINFO 1
-
-/* Clock Defines */
-#define V_OSCK 26000000 /* Clock output from T2 */
-#define V_SCLK (V_OSCK >> 1)
-
-#undef CONFIG_USE_IRQ /* no support for IRQs */
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_REVISION_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
- /* Sector */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
- /* initial data */
-
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CONS_INDEX 3
-#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
-#define CONFIG_SERIAL3 3
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \
- 115200}
-#define CONFIG_GENERIC_MMC 1
-#define CONFIG_MMC 1
-#define CONFIG_OMAP_HSMMC 1
-#define CONFIG_DOS_PARTITION 1
-
-/* DDR - I use Micron DDR */
-#define CONFIG_OMAP3_MICRON_DDR 1
-
-/* commands to include */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2 /* EXT2 Support */
-#define CONFIG_CMD_FAT /* FAT support */
-#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
-
-#define CONFIG_CMD_I2C /* I2C serial bus support */
-#define CONFIG_CMD_MMC /* MMC support */
-#define CONFIG_CMD_NAND /* NAND support */
-
-#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
-#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
-#undef CONFIG_CMD_IMI /* iminfo */
-#undef CONFIG_CMD_IMLS /* List all found images */
-#undef CONFIG_CMD_NFS /* NFS support */
-#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
-
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_SYS_I2C_BUS 0
-#define CONFIG_SYS_I2C_BUS_SELECT 1
-#define CONFIG_I2C_MULTI_BUS 1
-#define CONFIG_DRIVER_OMAP34XX_I2C 1
-
-/*
- * TWL4030
- */
-#define CONFIG_TWL4030_POWER 1
-#define CONFIG_TWL4030_LED 1
-
-/*
- * Board NAND Info.
- */
-#define CONFIG_SYS_NAND_QUIET_TEST 1
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
- /* to access nand */
-#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
- /* to access nand */
- /* at CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
- /* devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV "nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET 0x680000
-#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */
- /* partition */
-
-/* Environment information */
-#define CONFIG_BOOTDELAY 5
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x82000000\0" \
- "console=ttyO2,115200n8\0" \
- "mpurate=500\0" \
- "vram=12M\0" \
- "dvimode=1024x768MR-16@60\0" \
- "defaultdisplay=dvi\0" \
- "mmcdev=0\0" \
- "mmcroot=/dev/mmcblk0p2 rw\0" \
- "mmcrootfstype=ext3 rootwait\0" \
- "nandroot='ubi0:rootfs ubi.mtd=5 ubi.mtd=6 ubi.mtd=7'\0" \
- "nandrootfstype=ubifs\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "mpurate=${mpurate} " \
- "vram=${vram} " \
- "omapfb.mode=dvi:${dvimode} " \
- "omapfb.debug=y " \
- "omapdss.def_disp=${defaultdisplay} " \
- "root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
- "nandargs=setenv bootargs console=${console} " \
- "mpurate=${mpurate} " \
- "vram=${vram} " \
- "omapfb.mode=dvi:${dvimode} " \
- "omapfb.debug=y " \
- "omapdss.def_disp=${defaultdisplay} " \
- "root=${nandroot} " \
- "rootfstype=${nandrootfstype}\0" \
- "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source ${loadaddr}\0" \
- "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "bootm ${loadaddr}\0" \
- "nandboot=echo Booting from nand ...; " \
- "run nandargs; " \
- "nand read ${loadaddr} 280000 200000; " \
- "bootm ${loadaddr}\0" \
-
-#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loaduimage; then " \
- "run mmcboot; " \
- "else run nandboot; " \
- "fi; " \
- "fi; " \
- "else run nandboot; fi"
-
-#define CONFIG_AUTO_COMPLETE 1
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_PROMPT "Overo # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command */
- /* args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
-#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
- 0x01F00000) /* 31MB */
-
-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
- /* address */
-/*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
-#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */
-#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
-
-/* SDRAM Bank Allocation method */
-#define SDRC_R_B_C 1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-
-#define CONFIG_SYS_FLASH_BASE boot_flash_base
-
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
-
-#define CONFIG_ENV_IS_IN_NAND 1
-#define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */
-#define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */
-
-#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
-#define CONFIG_ENV_OFFSET boot_flash_off
-#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
-
-#ifndef __ASSEMBLY__
-extern unsigned int boot_flash_base;
-extern volatile unsigned int boot_flash_env_addr;
-extern unsigned int boot_flash_off;
-extern unsigned int boot_flash_sec;
-extern unsigned int boot_flash_type;
-#endif
-
-#if defined(CONFIG_CMD_NET)
-/*----------------------------------------------------------------------------
- * SMSC9211 Ethernet from SMSC9118 family
- *----------------------------------------------------------------------------
- */
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC911X 1
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE 0x2C000000
-
-#endif /* (CONFIG_CMD_NET) */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE 0x800
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
+++ /dev/null
-#
-# Copyright (C) 2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=u-boot
-PKG_VERSION:=2011.12
-PKG_RELEASE:=1
-
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:= \
- http://mirror2.openwrt.org/sources \
- ftp://ftp.denx.de/pub/u-boot
-PKG_MD5SUM:=7f29b9f6da44d6e46e988e7561fd1d5f
-PKG_TARGETS:=bin
-
-include $(INCLUDE_DIR)/package.mk
-
-define uboot/Default
- TITLE:=
- CONFIG:=
- IMAGE:=
-endef
-
-define uboot/omap4_panda
- TITLE:=U-Boot for the Pandaboard
-endef
-
-UBOOTS:=omap4_panda
-
-define Package/uboot/template
-define Package/uboot-omap4-$(1)
- SECTION:=boot
- CATEGORY:=Boot Loaders
- DEPENDS:=@TARGET_omap4
- TITLE:=$(2)
- URL:=http://www.denx.de/wiki/U-Boot
- VARIANT:=$(1)
-endef
-endef
-
-define BuildUbootPackage
- $(eval $(uboot/Default))
- $(eval $(uboot/$(1)))
- $(call Package/uboot/template,$(1),$(TITLE))
-endef
-
-
-ifdef BUILD_VARIANT
-$(eval $(call uboot/$(BUILD_VARIANT)))
-UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
-UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
-endif
-
-define Build/Prepare
- $(call Build/Prepare/Default)
-# $(CP) ./files/* $(PKG_BUILD_DIR)
- find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
-endef
-
-define Build/Configure
- $(MAKE) -C $(PKG_BUILD_DIR) \
- $(UBOOT_CONFIG)_config
-endef
-
-define Build/Compile
- $(MAKE) -C $(PKG_BUILD_DIR) \
- CROSS_COMPILE=$(TARGET_CROSS)
-endef
-
-define Package/uboot/install/template
-define Package/uboot-omap4-$(1)/install
- $(INSTALL_DIR) $$(1)
- $(CP) $(PKG_BUILD_DIR)/MLO $(BIN_DIR)/MLO-$(BOARD)
- $(CP) $(PKG_BUILD_DIR)/u-boot.img $(BIN_DIR)/$(2)
-endef
-endef
-
-$(foreach u,$(UBOOTS), \
- $(eval $(call Package/uboot/install/template,$(u),openwrt-$(BOARD)-$(u)-u-boot.img)) \
-)
-
-$(foreach u,$(UBOOTS), \
- $(eval $(call BuildUbootPackage,$(u))) \
- $(eval $(call BuildPackage,uboot-omap4-$(u))) \
-)
projects / openwrt / staging / nbd.git / commitdiff