if (data[0] == 1) {
i_MaxChannel = 8;
- } /* if (data[0] == 1) */
+ }
else {
if (data[0] == 2) {
i_MaxChannel = 6;
- } /* if(data[0]==2) */
+ }
else {
dev_warn(dev->hw_dev,
"The specified port event does not exist\n");
return -EINVAL;
- } /* else if(data[0]==2) */
- } /* else if (data[0] == 1) */
+ }
+ }
switch (data[1]) {
case 0:
data[1] = APCI1500_AND;
dev_warn(dev->hw_dev,
"The specified interrupt logic does not exist\n");
return -EINVAL;
- } /* switch(data[1]); */
+ }
i_Logic = data[1];
for (i_Count = i_MaxChannel, i = 0; i_Count > 0; i_Count--, i++) {
dev_warn(dev->hw_dev,
"The option indicated in the event mask does not exist\n");
return -EINVAL;
- } /* switch(i_EventMask) */
- } /* for (i_Count = i_MaxChannel; i_Count >0;i_Count --) */
+ }
+ }
if (data[0] == 1) {
/* Test the interrupt logic */
dev_warn(dev->hw_dev,
"Transition error on an OR PRIORITY logic\n");
return -EINVAL;
- } /* if (data[1]== APCI1500_OR_PRIORITY && i_PatternTransition != 0) */
+ }
/* Tests if more than one transition */
/* was declared for an AND logic */
((i_PatternTransition >>
i_Count) & 0x1);
- } /* for (i_Count = 0; i_Count < 8; i_Count++) */
+ }
if (i_PatternTransitionCount > 1) {
dev_warn(dev->hw_dev,
"Transition error on an AND logic\n");
return -EINVAL;
- } /* if (i_PatternTransitionCount > 1) */
- } /* if (data[1]== APCI1500_AND) */
+ }
+ }
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY) */
+ }
else {
dev_warn(dev->hw_dev,
"The choice for interrupt logic does not exist\n");
return -EINVAL;
- } /* else }// if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY) */
- } /* if (data[0]== 1) */
+ }
+ }
/* Test if event setting for port 2 */
outb(0xF4,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if (data[1] == APCI1500_OR) */
+ }
else {
dev_warn(dev->hw_dev,
"The choice for interrupt logic does not exist\n");
return -EINVAL;
- } /* elseif (data[1] == APCI1500_OR) */
- } /* if(data[0]==2) */
+ }
+ }
return insn->n;
}
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if(i_Event1Status==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Event 1 not initialised\n");
return -EINVAL;
- } /* else if(i_Event1Status==1) */
- } /* if (data[1]==1) */
+ }
+ }
if (data[1] == 2) {
if (i_Event2Status == 1) {
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_Event2InterruptStatus = 1;
- } /* if(i_Event2Status==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Event 2 not initialised\n");
return -EINVAL;
- } /* else if(i_Event2Status==1) */
- } /* if(data[1]==2) */
- } /* if (data[1] == 1 || data[0] == 2) */
+ }
+ }
+ }
else {
dev_warn(dev->hw_dev,
"The port parameter is in error\n");
return -EINVAL;
- } /* else if (data[1] == 1 || data[0] == 2) */
+ }
break;
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_Event1InterruptStatus = 0;
- } /* if(i_Event1Status==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Event 1 not initialised\n");
return -EINVAL;
- } /* else if(i_Event1Status==1) */
- } /* if (data[1]==1) */
+ }
+ }
if (data[1] == 2) {
/* Test if event initialised */
if (i_Event2Status == 1) {
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_Event2InterruptStatus = 0;
- } /* if(i_Event2Status==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Event 2 not initialised\n");
return -EINVAL;
- } /* else if(i_Event2Status==1) */
- } /* if(data[1]==2) */
+ }
+ }
- } /* if (data[1] == 1 || data[1] == 2) */
+ }
else {
dev_warn(dev->hw_dev,
"The port parameter is in error\n");
return -EINVAL;
- } /* else if (data[1] == 1 || data[1] == 2) */
+ }
break;
default:
dev_warn(dev->hw_dev,
"The option of START/STOP logic does not exist\n");
return -EINVAL;
- } /* switch(data[0]) */
+ }
return insn->n;
}
data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
outw(data[0],
devpriv->i_IobaseAddon + APCI1500_DIGITAL_OP);
- } /* if(data[1]==0) */
+ }
else {
if (data[1] == 1) {
switch (ui_NoOfChannel) {
"chan spec wrong\n");
return -EINVAL; /* "sorry channel spec wrong " */
- } /* switch(ui_NoOfChannels) */
+ }
outw(data[0],
devpriv->i_IobaseAddon +
APCI1500_DIGITAL_OP);
- } /* if(data[1]==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Specified channel not supported\n");
return -EINVAL;
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==0) */
+ }
+ }
+ }
else {
if (data[3] == 1) {
if (data[1] == 0) {
outw(data[0],
devpriv->i_IobaseAddon +
APCI1500_DIGITAL_OP);
- } /* if(data[1]==0) */
+ }
else {
if (data[1] == 1) {
switch (ui_NoOfChannel) {
"chan spec wrong\n");
return -EINVAL; /* "sorry channel spec wrong " */
- } /* switch(ui_NoOfChannels) */
+ }
outw(data[0],
devpriv->i_IobaseAddon +
APCI1500_DIGITAL_OP);
- } /* if(data[1]==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Specified channel not supported\n");
return -EINVAL;
- } /* else if(data[1]==1) */
- } /* elseif(data[1]==0) */
- } /* if(data[3]==1); */
+ }
+ }
+ }
else {
dev_warn(dev->hw_dev,
"Specified functionality does not exist\n");
return -EINVAL;
- } /* if else data[3]==1) */
- } /* if else data[3]==0) */
+ }
+ }
ui_Temp = data[0];
return insn->n;
}
/* Selection of the input clock */
if (data[0] == 0 || data[0] == 1 || data[0] == 2) {
outw(data[0], devpriv->i_IobaseAddon + APCI1500_CLK_SELECT);
- } /* if(data[0]==0||data[0]==1||data[0]==2) */
+ }
else {
if (data[0] != 3) {
dev_warn(dev->hw_dev,
"The option for input clock selection does not exist\n");
return -EINVAL;
- } /* if(data[0]!=3) */
- } /* elseif(data[0]==0||data[0]==1||data[0]==2) */
+ }
+ }
/* Select the counter/timer */
switch (data[1]) {
case COUNTER1:
dev_warn(dev->hw_dev,
"This choice is not a timer nor a counter\n");
return -EINVAL;
- } /* switch(data[2]) */
+ }
/* Selecting single or continuous mode */
switch (data[4]) {
dev_warn(dev->hw_dev,
"This option for single/continuous mode does not exist\n");
return -EINVAL;
- } /* switch(data[4]) */
+ }
i_TimerCounterMode = data[2] | data[4] | 7;
/* Test the reload value */
outb(0x2,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
+ }
else {
dev_warn(dev->hw_dev,
"Error in selection of interrupt enable or disable\n");
return -EINVAL;
- } /* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
- } /* if ((data[3]>= 0) && (data[3] <= 65535)) */
+ }
+ }
else {
dev_warn(dev->hw_dev,
"Error in selection of reload value\n");
return -EINVAL;
- } /* else if ((data[3]>= 0) && (data[3] <= 65535)) */
+ }
i_TimerCounterWatchdogInterrupt = data[7];
i_TimerCounter1Init = 1;
break;
dev_warn(dev->hw_dev,
"This choice is not a timer nor a counter\n");
return -EINVAL;
- } /* switch(data[2]) */
+ }
/* Selecting single or continuous mode */
switch (data[4]) {
dev_warn(dev->hw_dev,
"This option for single/continuous mode does not exist\n");
return -EINVAL;
- } /* switch(data[4]) */
+ }
/* Selecting software or hardware trigger */
switch (data[5]) {
dev_warn(dev->hw_dev,
"This choice for software or hardware trigger does not exist\n");
return -EINVAL;
- } /* switch(data[5]) */
+ }
/* Selecting software or hardware gate */
switch (data[6]) {
dev_warn(dev->hw_dev,
"This choice for software or hardware gate does not exist\n");
return -EINVAL;
- } /* switch(data[6]) */
+ }
i_TimerCounterMode = data[2] | data[4] | data[5] | data[6] | 7;
outb(0x2,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
+ }
else {
dev_warn(dev->hw_dev,
"Error in selection of interrupt enable or disable\n");
return -EINVAL;
- } /* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
- } /* if ((data[3]>= 0) && (data[3] <= 65535)) */
+ }
+ }
else {
dev_warn(dev->hw_dev,
"Error in selection of reload value\n");
return -EINVAL;
- } /* else if ((data[3]>= 0) && (data[3] <= 65535)) */
+ }
i_TimerCounterWatchdogInterrupt = data[7];
i_TimerCounter2Init = 1;
break;
dev_warn(dev->hw_dev,
"This choice is not a watchdog nor a counter\n");
return -EINVAL;
- } /* switch(data[2]) */
+ }
/* Selecting single or continuous mode */
switch (data[4]) {
dev_warn(dev->hw_dev,
"This option for single/continuous mode does not exist\n");
return -EINVAL;
- } /* switch(data[4]) */
+ }
/* Selecting software or hardware gate */
switch (data[6]) {
dev_warn(dev->hw_dev,
"This choice for software or hardware gate does not exist\n");
return -EINVAL;
- } /* switch(data[6]) */
+ }
/* Test if used for watchdog */
/* - Enables retrigger */
/* - Pulses output */
i_TimerCounterMode = data[2] | data[4] | 0x54;
- } /* if (data[2] == APCI1500_WATCHDOG) */
+ }
else {
i_TimerCounterMode = data[2] | data[4] | data[6] | 7;
- } /* elseif (data[2] == APCI1500_WATCHDOG) */
+ }
/* Test the reload value */
if ((data[3] >= 0) && (data[3] <= 65535)) {
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* elseif(data[2]==APCI1500_COUNTER) */
+ }
- } /* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
+ }
else {
dev_warn(dev->hw_dev,
"Error in selection of interrupt enable or disable\n");
return -EINVAL;
- } /* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
- } /* if ((data[3]>= 0) && (data[3] <= 65535)) */
+ }
+ }
else {
dev_warn(dev->hw_dev,
"Error in selection of reload value\n");
return -EINVAL;
- } /* else if ((data[3]>= 0) && (data[3] <= 65535)) */
+ }
i_TimerCounterWatchdogInterrupt = data[7];
i_WatchdogCounter3Init = 1;
break;
dev_warn(dev->hw_dev,
"The specified counter/timer option does not exist\n");
return -EINVAL;
- } /* switch(data[1]) */
+ }
i_CounterLogic = data[2];
return insn->n;
}
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_TimerCounter1Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Counter/Timer1 not configured\n");
/* Set Trigger and gate */
i_CommandAndStatusValue = 0x6;
- } /* if( i_TimerCounter1Enabled==1) */
+ }
else {
/* Set Trigger */
i_CommandAndStatusValue = 0x2;
- } /* elseif(i_TimerCounter1Enabled==1) */
+ }
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_TimerCounter1Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Counter/Timer1 not configured\n");
dev_warn(dev->hw_dev,
"The specified option for start/stop/trigger does not exist\n");
return -EINVAL;
- } /* switch(data[1]) */
+ }
break;
case COUNTER2:
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_TimerCounter2Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Counter/Timer2 not configured\n");
/* Set Trigger and gate */
i_CommandAndStatusValue = 0x6;
- } /* if( i_TimerCounter2Enabled==1) */
+ }
else {
/* Set Trigger */
i_CommandAndStatusValue = 0x2;
- } /* elseif(i_TimerCounter2Enabled==1) */
+ }
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_TimerCounter2Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Counter/Timer2 not configured\n");
dev_warn(dev->hw_dev,
"The specified option for start/stop/trigger does not exist\n");
return -EINVAL;
- } /* switch(data[1]) */
+ }
break;
case COUNTER3:
switch (data[1]) {
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_WatchdogCounter3init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Watchdog/Counter3 not configured\n");
/* Set Trigger and gate */
i_CommandAndStatusValue = 0x6;
- } /* if( i_WatchdogCounter3Enabled==1) */
+ }
else {
/* Set Trigger */
i_CommandAndStatusValue = 0x2;
- } /* elseif(i_WatchdogCounter3Enabled==1) */
+ }
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_WatchdogCounter3Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Counter3 not configured\n");
outb(0x6,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_WatchdogCounter3Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Watchdog 3 not configured\n");
dev_warn(dev->hw_dev,
"Wrong choice of watchdog/counter3\n");
return -EINVAL;
- } /* switch(data[2]) */
+ }
break;
default:
dev_warn(dev->hw_dev,
"The specified option for start/stop/trigger does not exist\n");
return -EINVAL;
- } /* switch(data[1]) */
+ }
break;
default:
dev_warn(dev->hw_dev,
"The specified choice for counter/watchdog/timer does not exist\n");
return -EINVAL;
- } /* switch(data[0]) */
+ }
return insn->n;
}
/* Set RCC and gate */
i_CommandAndStatusValue = 0xC;
- } /* if( i_TimerCounter1Init==1) */
+ }
else {
/* Set RCC */
i_CommandAndStatusValue = 0x8;
- } /* elseif(i_TimerCounter1Init==1) */
+ }
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
data[0] =
data[0] | inb(devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_TimerCounter1Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"Timer/Counter1 not configured\n");
return -EINVAL;
- } /* elseif( i_TimerCounter1Init==1) */
+ }
break;
case COUNTER2:
/* Read counter/timer2 */
/* Set RCC and gate */
i_CommandAndStatusValue = 0xC;
- } /* if( i_TimerCounter2Init==1) */
+ }
else {
/* Set RCC */
i_CommandAndStatusValue = 0x8;
- } /* elseif(i_TimerCounter2Init==1) */
+ }
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
dev_warn(dev->hw_dev,
"Timer/Counter2 not configured\n");
return -EINVAL;
- } /* elseif( i_TimerCounter2Init==1) */
+ }
break;
case COUNTER3:
/* Read counter/watchdog2 */
/* Set RCC and gate */
i_CommandAndStatusValue = 0xC;
- } /* if( i_TimerCounter2Init==1) */
+ }
else {
/* Set RCC */
i_CommandAndStatusValue = 0x8;
- } /* elseif(i_WatchdogCounter3Init==1) */
+ }
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
data[0] =
data[0] | inb(devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
- } /* if( i_WatchdogCounter3Init==1) */
+ }
else {
dev_warn(dev->hw_dev,
"WatchdogCounter3 not configured\n");
return -EINVAL;
- } /* elseif( i_WatchdogCounter3Init==1) */
+ }
break;
default:
dev_warn(dev->hw_dev,
"The choice of timer/counter/watchdog does not exist\n");
return -EINVAL;
- } /* switch(data[0]) */
+ }
return insn->n;
}
outl(0x0, devpriv->i_IobaseAmcc + 0x38);
if (data[0] == 1) {
i_Constant = 0xC0;
- } /* if(data[0]==1) */
+ }
else {
if (data[0] == 0) {
i_Constant = 0x00;
- } /* if{data[0]==0) */
+ }
else {
dev_warn(dev->hw_dev,
"The parameter passed to driver is in error for enabling the voltage interrupt\n");
return -EINVAL;
- } /* else if(data[0]==0) */
- } /* elseif(data[0]==1) */
+ }
+ }
/* Selects the mode specification register of port B */
outb(APCI1500_RW_PORT_B_SPECIFICATION,
if ((ui_InterruptStatus & 0x800000) == 0x800000) {
/* Disable all Interrupt */
/* Selects the master interrupt control register */
- /* outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER); */
/* Disables the main interrupt on the board */
- /* outb(0x00,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER); */
-
/* Selects the command and status register of port A */
outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
i_InputChannel = 1 + (i_RegValue >> 1);
- } /* if(i_Logic==APCI1500_OR_PRIORITY) */
+ }
else {
i_InputChannel = 0;
- } /* elseif(i_Logic==APCI1500_OR_PRIORITY) */
- } /* if ((i_RegValue & 0x60) == 0x60) */
+ }
+ }
/* Selects the command and status register of port B */
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS,
if (i_RegValue & 0x80) {
i_InterruptMask =
i_InterruptMask | 0x40;
- } /* if (i_RegValue & 0x80) */
+ }
if (i_RegValue & 0x40) {
i_InterruptMask =
i_InterruptMask | 0x80;
- } /* if (i_RegValue & 0x40) */
- } /* if (i_RegValue) */
+ }
+ }
else {
i_InterruptMask = i_InterruptMask | 2;
- } /* if (i_RegValue) */
- } /* if ((i_RegValue & 0x60) == 0x60) */
+ }
+ }
/* Selects the command and status register of timer 1 */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_InterruptMask = i_InterruptMask | 4;
- } /* if ((i_RegValue & 0x60) == 0x60) */
+ }
/* Selects the command and status register of timer 2 */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_InterruptMask = i_InterruptMask | 8;
- } /* if ((i_RegValue & 0x60) == 0x60) */
+ }
/* Selects the command and status register of timer 3 */
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
i_InterruptMask = i_InterruptMask | 0x10;
else
i_InterruptMask = i_InterruptMask | 0x20;
- } /* if ((i_RegValue & 0x60) == 0x60) */
+ }
send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */
/* Enable all Interrupts */
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Authorizes the main interrupt on the board */
outb(0xD0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
- } /* if ((ui_InterruptStatus & 0x800000) == 0x800000) */
+ }
else {
dev_warn(dev->hw_dev,
"Interrupt from unknown source\n");
- } /* else if ((ui_InterruptStatus & 0x800000) == 0x800000) */
+ }
return;
}
projects / openwrt / staging / blogic.git / commitdiff