Synchronized translations with sources.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
msgid "-------"
msgstr ""
+msgid ""
+"<b>Caution:</b> To prevent OOM exceptions on low memory devices with less "
+"than 64 MB free RAM, please only select a few of them!"
+msgstr ""
+
msgid "Adblock"
msgstr "Adblock"
msgid "Advanced"
msgstr "Avanzato"
-msgid "Available blocklist sources."
-msgstr "Fonti lista di blocco disponibili."
-
msgid "Backup Directory"
msgstr "Directory del Backup"
"domains except those listed in the whitelist file.<br />"
msgstr ""
-msgid ""
-"Caution: To prevent OOM exceptions on low memory devices with less than 64 "
-"MB free RAM, please do not select more than five blocklist sources!"
+msgid "Categories"
msgstr ""
msgid ""
msgid "Download Utility (SSL Library)"
msgstr ""
-msgid ""
-"During opkg package installation use the '--force-maintainer' option to "
-"overwrite the pre-existing config file or download a fresh default config "
-"from <a href=\"%s\" target=\"_blank\">here</a>"
-msgstr ""
-
msgid "Edit Blacklist"
msgstr "Modifica Lista Nera"
msgid "Last Run"
msgstr "Ultimo Avvio"
-msgid ""
-"List URLs and Shallalist category selections are configurable in the "
-"'Advanced' section.<br />"
-msgstr ""
-"Le selezioni degli URL delle liste e categorie Shallalist sono configurabili "
-"nella sezione 'Avanzato'.<br />"
-
msgid ""
"List of available network interfaces. Usually the startup will be triggered "
"by the 'wan' interface.<br />"
"Please note: this needs additional 'msmtp' package installation and setup."
msgstr ""
-msgid "Please update your adblock config file to use this package.<br />"
-msgstr ""
-
msgid "Query"
msgstr "Interrogazione"
msgid "Target directory for the generated blocklist 'adb_list.overall'."
msgstr "Directory per la lista di blocco generata 'adb_list.overall'."
-msgid "The file size is too large for online editing in LuCI (> 512 KB)."
+msgid "The file size is too large for online editing in LuCI (≥ 100 KB)."
msgstr ""
-"La grandezza del file è troppo grande per modificarla online in LuCI (> "
-"512 KB)."
msgid ""
"This form allows you to modify the content of the adblock blacklist (%s)."
"Questo form mostra l'output del registro, prefiltrato per messaggi relativi "
"solo ad adblock."
-msgid "This section contains no values yet"
-msgstr ""
-
msgid ""
"To overwrite the default path use the 'DNS Directory' option in the extra "
"section below."
msgid "running"
msgstr ""
+#~ msgid "Available blocklist sources."
+#~ msgstr "Fonti lista di blocco disponibili."
+
+#~ msgid ""
+#~ "List URLs and Shallalist category selections are configurable in the "
+#~ "'Advanced' section.<br />"
+#~ msgstr ""
+#~ "Le selezioni degli URL delle liste e categorie Shallalist sono "
+#~ "configurabili nella sezione 'Avanzato'.<br />"
+
+#~ msgid "The file size is too large for online editing in LuCI (> 512 KB)."
+#~ msgstr ""
+#~ "La grandezza del file è troppo grande per modificarla online in LuCI "
+#~ "(> 512 KB)."
+
#~ msgid ""
#~ "For SSL protected blocklist sources you need a suitable SSL library, e.g. "
#~ "'libustream-ssl' or the wget 'built-in'."
msgid "-------"
msgstr "(利用不可)"
+msgid ""
+"<b>Caution:</b> To prevent OOM exceptions on low memory devices with less "
+"than 64 MB free RAM, please only select a few of them!"
+msgstr ""
+
msgid "Adblock"
msgstr "Adblock"
msgid "Advanced"
msgstr "詳細設定"
-msgid "Available blocklist sources."
-msgstr "利用可能なブロックリスト提供元です。"
-
msgid "Backup Directory"
msgstr "バックアップ先 ディレクトリ"
"ホワイトリストに存在しない全ドメインへのアクセスをブロックするために、追加で "
"'Jail' リスト (/tmp/adb_list.jail) を作成します。<br />"
-msgid ""
-"Caution: To prevent OOM exceptions on low memory devices with less than 64 "
-"MB free RAM, please do not select more than five blocklist sources!"
+msgid "Categories"
msgstr ""
-"警告: RAM の空き容量が 64MB に満たないメモリー容量の小さいデバイスでは、 "
-"OutOfMemory (OOM) 例外を防ぐために、5個よりも多くのリストを選択しないようにし"
-"てください。"
msgid ""
"Choose 'none' to disable automatic startups, 'timed' to use a classic "
msgid "Download Utility (SSL Library)"
msgstr "ダウンロード ユーティリティ(SSL ライブラリ)"
-msgid ""
-"During opkg package installation use the '--force-maintainer' option to "
-"overwrite the pre-existing config file or download a fresh default config "
-"from <a href=\"%s\" target=\"_blank\">here</a>"
-msgstr ""
-"opkg でパッケージをインストールする際に '--force-maintainer' オプションを使用"
-"して既存の設定ファイルを上書きするか、 <a href=\"%s\" target=\"_blank\">ここ"
-"</a> からデフォルトの設定ファイルをダウンロードしてください。"
-
msgid "Edit Blacklist"
msgstr "ブラックリストの編集"
msgid "Last Run"
msgstr "最終実行"
-msgid ""
-"List URLs and Shallalist category selections are configurable in the "
-"'Advanced' section.<br />"
-msgstr ""
-"リストの URL 及び \"Shalla\" リストのカテゴリー設定は、'詳細設定' セクション"
-"で設定することができます。<br />"
-
msgid ""
"List of available network interfaces. Usually the startup will be triggered "
"by the 'wan' interface.<br />"
msgstr ""
"注意: これには、追加で 'msmtp' のインストールとセットアップが必要です。"
-msgid "Please update your adblock config file to use this package.<br />"
-msgstr ""
-"このパッケージを使用するには、既存の Adblock 設定ファイルを更新してください。"
-"<br />"
-
msgid "Query"
msgstr "検索"
msgid "Target directory for the generated blocklist 'adb_list.overall'."
msgstr "生成されたブロックリスト 'adb_list.overall' の保存先ディレクトリです。"
-msgid "The file size is too large for online editing in LuCI (> 512 KB)."
+msgid "The file size is too large for online editing in LuCI (≥ 100 KB)."
msgstr ""
-"ファイル サイズが大きすぎる(512 KB超)ため、 LuCI 上でオンライン編集できませ"
-"ん。"
msgid ""
"This form allows you to modify the content of the adblock blacklist (%s)."
"このフォームには、システムログ内の Adblock に関連するメッセージのみが表示され"
"ます。"
-msgid "This section contains no values yet"
-msgstr "このセクションには、まだ値がありません"
-
msgid ""
"To overwrite the default path use the 'DNS Directory' option in the extra "
"section below."
msgid "running"
msgstr "実行中"
+
+#~ msgid "Available blocklist sources."
+#~ msgstr "利用可能なブロックリスト提供元です。"
+
+#~ msgid ""
+#~ "Caution: To prevent OOM exceptions on low memory devices with less than "
+#~ "64 MB free RAM, please do not select more than five blocklist sources!"
+#~ msgstr ""
+#~ "警告: RAM の空き容量が 64MB に満たないメモリー容量の小さいデバイスでは、 "
+#~ "OutOfMemory (OOM) 例外を防ぐために、5個よりも多くのリストを選択しないよう"
+#~ "にしてください。"
+
+#~ msgid ""
+#~ "During opkg package installation use the '--force-maintainer' option to "
+#~ "overwrite the pre-existing config file or download a fresh default config "
+#~ "from <a href=\"%s\" target=\"_blank\">here</a>"
+#~ msgstr ""
+#~ "opkg でパッケージをインストールする際に '--force-maintainer' オプションを"
+#~ "使用して既存の設定ファイルを上書きするか、 <a href=\"%s\" target=\"_blank"
+#~ "\">ここ</a> からデフォルトの設定ファイルをダウンロードしてください。"
+
+#~ msgid ""
+#~ "List URLs and Shallalist category selections are configurable in the "
+#~ "'Advanced' section.<br />"
+#~ msgstr ""
+#~ "リストの URL 及び \"Shalla\" リストのカテゴリー設定は、'詳細設定' セクショ"
+#~ "ンで設定することができます。<br />"
+
+#~ msgid "Please update your adblock config file to use this package.<br />"
+#~ msgstr ""
+#~ "このパッケージを使用するには、既存の Adblock 設定ファイルを更新してくださ"
+#~ "い。<br />"
+
+#~ msgid "The file size is too large for online editing in LuCI (> 512 KB)."
+#~ msgstr ""
+#~ "ファイル サイズが大きすぎる(512 KB超)ため、 LuCI 上でオンライン編集でき"
+#~ "ません。"
+
+#~ msgid "This section contains no values yet"
+#~ msgstr "このセクションには、まだ値がありません"
msgid "-------"
msgstr ""
+msgid ""
+"<b>Caution:</b> To prevent OOM exceptions on low memory devices with less "
+"than 64 MB free RAM, please only select a few of them!"
+msgstr ""
+
msgid "Adblock"
msgstr "Adblock"
msgid "Advanced"
msgstr "Avançado"
-msgid "Available blocklist sources."
-msgstr "Fontes de listas de bloqueio disponíveis."
-
msgid "Backup Directory"
msgstr "Diretório da cópia de segurança"
"domains except those listed in the whitelist file.<br />"
msgstr ""
-msgid ""
-"Caution: To prevent OOM exceptions on low memory devices with less than 64 "
-"MB free RAM, please do not select more than five blocklist sources!"
+msgid "Categories"
msgstr ""
msgid ""
msgid "Download Utility (SSL Library)"
msgstr "Utilitário de Download (Biblioteca SSL)"
-msgid ""
-"During opkg package installation use the '--force-maintainer' option to "
-"overwrite the pre-existing config file or download a fresh default config "
-"from <a href=\"%s\" target=\"_blank\">here</a>"
-msgstr ""
-
msgid "Edit Blacklist"
msgstr "Editar Lista de Bloqueio"
msgid "Last Run"
msgstr ""
-msgid ""
-"List URLs and Shallalist category selections are configurable in the "
-"'Advanced' section.<br />"
-msgstr ""
-
msgid ""
"List of available network interfaces. Usually the startup will be triggered "
"by the 'wan' interface.<br />"
"Please note: this needs additional 'msmtp' package installation and setup."
msgstr ""
-msgid "Please update your adblock config file to use this package.<br />"
-msgstr ""
-
msgid "Query"
msgstr "Consulta"
msgid "Target directory for the generated blocklist 'adb_list.overall'."
msgstr ""
-msgid "The file size is too large for online editing in LuCI (> 512 KB)."
+msgid "The file size is too large for online editing in LuCI (≥ 100 KB)."
msgstr ""
-"O tamanho do arquivo é muito grande para edição online no LuCI (> 512 KB)."
msgid ""
"This form allows you to modify the content of the adblock blacklist (%s)."
"Esse formulário mostra a saída do syslog, pré-filtrado para mensagens do "
"adblock apenas."
-msgid "This section contains no values yet"
-msgstr ""
-
msgid ""
"To overwrite the default path use the 'DNS Directory' option in the extra "
"section below."
msgid "running"
msgstr ""
+#~ msgid "Available blocklist sources."
+#~ msgstr "Fontes de listas de bloqueio disponíveis."
+
+#~ msgid "The file size is too large for online editing in LuCI (> 512 KB)."
+#~ msgstr ""
+#~ "O tamanho do arquivo é muito grande para edição online no LuCI (> 512 "
+#~ "KB)."
+
#~ msgid ""
#~ "For SSL protected blocklist sources you need a suitable SSL library, e.g. "
#~ "'libustream-ssl' or the wget 'built-in'."
msgid "-------"
msgstr "-------"
+msgid ""
+"<b>Caution:</b> To prevent OOM exceptions on low memory devices with less "
+"than 64 MB free RAM, please only select a few of them!"
+msgstr ""
+
msgid "Adblock"
msgstr "AdBlock"
msgid "Advanced"
msgstr "Дополнительно"
-msgid "Available blocklist sources."
-msgstr "Источники списков блокировки. "
-
msgid "Backup Directory"
msgstr "Папка для бэкапа"
"заблокировать доступ ко всем доменам, кроме тех что перечислены в файле "
"Белого списка.<br />"
-msgid ""
-"Caution: To prevent OOM exceptions on low memory devices with less than 64 "
-"MB free RAM, please do not select more than five blocklist sources!"
+msgid "Categories"
msgstr ""
-"ВНИМАНИЕ: Для предотвращения возможного программного сбоя и перезагрузки, на "
-"устройствах с объемом оперативной памяти менее 64MB, не выбирайте больше 5 "
-"списков."
msgid ""
"Choose 'none' to disable automatic startups, 'timed' to use a classic "
msgid "Download Utility (SSL Library)"
msgstr "Загрузить утилиту (библиотека SSL)"
-msgid ""
-"During opkg package installation use the '--force-maintainer' option to "
-"overwrite the pre-existing config file or download a fresh default config "
-"from <a href=\"%s\" target=\"_blank\">here</a>"
-msgstr ""
-"Устанавливая пакет с помощью opkg, используйте '--force-maintainer', чтобы "
-"перезаписать существующий config файл или загрузить новый дефолтный config "
-"файл <a href=\"%s\" target=\"_blank\">здесь</a>"
-
msgid "Edit Blacklist"
msgstr "Редактировать Черный список"
msgid "Last Run"
msgstr "Последнее время запуска"
-msgid ""
-"List URLs and Shallalist category selections are configurable in the "
-"'Advanced' section.<br />"
-msgstr ""
-"Список URL-адресов и настройка списка использования, настраиваются на "
-"странице 'Дополнительно'.<br />"
-
msgid ""
"List of available network interfaces. Usually the startup will be triggered "
"by the 'wan' interface.<br />"
"Please note: this needs additional 'msmtp' package installation and setup."
msgstr "Внимание: это потребует дополнительной установки пакета 'msmtp'."
-msgid "Please update your adblock config file to use this package.<br />"
-msgstr "Обновите config файл Adblock, чтобы использовать этот пакет.<br />"
-
msgid "Query"
msgstr "Запрос"
msgid "Target directory for the generated blocklist 'adb_list.overall'."
msgstr "Назначить папку для создания списка блокировки 'adb_list.overall'."
-msgid "The file size is too large for online editing in LuCI (> 512 KB)."
+msgid "The file size is too large for online editing in LuCI (≥ 100 KB)."
msgstr ""
-"Размер файла слишком большой, для онлайн редактирования в LuCI (> 512 KB)."
msgid ""
"This form allows you to modify the content of the adblock blacklist (%s)."
"only."
msgstr "Страница системного журнала. Только сообщения связанные с Adblock."
-msgid "This section contains no values yet"
-msgstr "Здесь не содержатся необходимые значения"
-
msgid ""
"To overwrite the default path use the 'DNS Directory' option in the extra "
"section below."
msgid "running"
msgstr "работает"
+
+#~ msgid "Available blocklist sources."
+#~ msgstr "Источники списков блокировки. "
+
+#~ msgid ""
+#~ "Caution: To prevent OOM exceptions on low memory devices with less than "
+#~ "64 MB free RAM, please do not select more than five blocklist sources!"
+#~ msgstr ""
+#~ "ВНИМАНИЕ: Для предотвращения возможного программного сбоя и перезагрузки, "
+#~ "на устройствах с объемом оперативной памяти менее 64MB, не выбирайте "
+#~ "больше 5 списков."
+
+#~ msgid ""
+#~ "During opkg package installation use the '--force-maintainer' option to "
+#~ "overwrite the pre-existing config file or download a fresh default config "
+#~ "from <a href=\"%s\" target=\"_blank\">here</a>"
+#~ msgstr ""
+#~ "Устанавливая пакет с помощью opkg, используйте '--force-maintainer', "
+#~ "чтобы перезаписать существующий config файл или загрузить новый дефолтный "
+#~ "config файл <a href=\"%s\" target=\"_blank\">здесь</a>"
+
+#~ msgid ""
+#~ "List URLs and Shallalist category selections are configurable in the "
+#~ "'Advanced' section.<br />"
+#~ msgstr ""
+#~ "Список URL-адресов и настройка списка использования, настраиваются на "
+#~ "странице 'Дополнительно'.<br />"
+
+#~ msgid "Please update your adblock config file to use this package.<br />"
+#~ msgstr "Обновите config файл Adblock, чтобы использовать этот пакет.<br />"
+
+#~ msgid "The file size is too large for online editing in LuCI (> 512 KB)."
+#~ msgstr ""
+#~ "Размер файла слишком большой, для онлайн редактирования в LuCI (> 512 "
+#~ "KB)."
+
+#~ msgid "This section contains no values yet"
+#~ msgstr "Здесь не содержатся необходимые значения"
msgid "-------"
msgstr "-------"
+msgid ""
+"<b>Caution:</b> To prevent OOM exceptions on low memory devices with less "
+"than 64 MB free RAM, please only select a few of them!"
+msgstr ""
+
msgid "Adblock"
msgstr "Adblock"
msgid "Advanced"
msgstr "Avancerat"
-msgid "Available blocklist sources."
-msgstr "Tillgängliga källor för blockeringslistor"
-
msgid "Backup Directory"
msgstr "Säkerhetskopiera mapp"
"domains except those listed in the whitelist file.<br />"
msgstr ""
-msgid ""
-"Caution: To prevent OOM exceptions on low memory devices with less than 64 "
-"MB free RAM, please do not select more than five blocklist sources!"
+msgid "Categories"
msgstr ""
msgid ""
msgid "Download Utility (SSL Library)"
msgstr "Nerladdningsprogram (SSL-bibliotek)"
-msgid ""
-"During opkg package installation use the '--force-maintainer' option to "
-"overwrite the pre-existing config file or download a fresh default config "
-"from <a href=\"%s\" target=\"_blank\">here</a>"
-msgstr ""
-
msgid "Edit Blacklist"
msgstr "Redigera svartlista"
msgid "Last Run"
msgstr "Kördes senast"
-msgid ""
-"List URLs and Shallalist category selections are configurable in the "
-"'Advanced' section.<br />"
-msgstr ""
-
msgid ""
"List of available network interfaces. Usually the startup will be triggered "
"by the 'wan' interface.<br />"
"Please note: this needs additional 'msmtp' package installation and setup."
msgstr ""
-msgid "Please update your adblock config file to use this package.<br />"
-msgstr ""
-
msgid "Query"
msgstr "Fråga"
msgstr ""
msgid ""
-"Size of the download queue to handle downloads & list processing in parallel "
-"(default '4').<br />"
+"Size of the download queue to handle downloads & list processing in "
+"parallel (default '4').<br />"
msgstr ""
msgid "Startup Trigger"
msgid "Target directory for the generated blocklist 'adb_list.overall'."
msgstr ""
-msgid "The file size is too large for online editing in LuCI (> 512 KB)."
-msgstr "Filstorleken är för stor för online-redigering i LuCi (> 512 KB)."
+msgid "The file size is too large for online editing in LuCI (≥ 100 KB)."
+msgstr ""
msgid ""
"This form allows you to modify the content of the adblock blacklist (%s)."
"only."
msgstr ""
-msgid "This section contains no values yet"
-msgstr ""
-
msgid ""
"To overwrite the default path use the 'DNS Directory' option in the extra "
"section below."
msgid "running"
msgstr ""
+#~ msgid "Available blocklist sources."
+#~ msgstr "Tillgängliga källor för blockeringslistor"
+
+#~ msgid "The file size is too large for online editing in LuCI (> 512 KB)."
+#~ msgstr ""
+#~ "Filstorleken är för stor för online-redigering i LuCi (> 512 KB)."
+
#~ msgid ""
#~ "Caution: Please don't select big lists or many lists at once on low "
#~ "memory devices to prevent OOM exceptions!"
msgid "-------"
msgstr ""
+msgid ""
+"<b>Caution:</b> To prevent OOM exceptions on low memory devices with less "
+"than 64 MB free RAM, please only select a few of them!"
+msgstr ""
+
msgid "Adblock"
msgstr ""
msgid "Advanced"
msgstr ""
-msgid "Available blocklist sources."
-msgstr ""
-
msgid "Backup Directory"
msgstr ""
"domains except those listed in the whitelist file.<br />"
msgstr ""
-msgid ""
-"Caution: To prevent OOM exceptions on low memory devices with less than 64 "
-"MB free RAM, please do not select more than five blocklist sources!"
+msgid "Categories"
msgstr ""
msgid ""
msgid "Download Utility (SSL Library)"
msgstr ""
-msgid ""
-"During opkg package installation use the '--force-maintainer' option to "
-"overwrite the pre-existing config file or download a fresh default config "
-"from <a href=\"%s\" target=\"_blank\">here</a>"
-msgstr ""
-
msgid "Edit Blacklist"
msgstr ""
msgid "Last Run"
msgstr ""
-msgid ""
-"List URLs and Shallalist category selections are configurable in the "
-"'Advanced' section.<br />"
-msgstr ""
-
msgid ""
"List of available network interfaces. Usually the startup will be triggered "
"by the 'wan' interface.<br />"
"Please note: this needs additional 'msmtp' package installation and setup."
msgstr ""
-msgid "Please update your adblock config file to use this package.<br />"
-msgstr ""
-
msgid "Query"
msgstr ""
msgid "Target directory for the generated blocklist 'adb_list.overall'."
msgstr ""
-msgid "The file size is too large for online editing in LuCI (> 512 KB)."
+msgid "The file size is too large for online editing in LuCI (≥ 100 KB)."
msgstr ""
msgid ""
"only."
msgstr ""
-msgid "This section contains no values yet"
-msgstr ""
-
msgid ""
"To overwrite the default path use the 'DNS Directory' option in the extra "
"section below."
msgid "-------"
msgstr "-------"
+msgid ""
+"<b>Caution:</b> To prevent OOM exceptions on low memory devices with less "
+"than 64 MB free RAM, please only select a few of them!"
+msgstr ""
+
msgid "Adblock"
msgstr "Adblock"
msgid "Advanced"
msgstr "高级"
-msgid "Available blocklist sources."
-msgstr "可用的 blocklist 来源。"
-
msgid "Backup Directory"
msgstr "备份目录"
"domains except those listed in the whitelist file.<br />"
msgstr ""
-msgid ""
-"Caution: To prevent OOM exceptions on low memory devices with less than 64 "
-"MB free RAM, please do not select more than five blocklist sources!"
+msgid "Categories"
msgstr ""
msgid ""
msgid "Download Utility (SSL Library)"
msgstr "下载实用程序(SSL 库)"
-msgid ""
-"During opkg package installation use the '--force-maintainer' option to "
-"overwrite the pre-existing config file or download a fresh default config "
-"from <a href=\"%s\" target=\"_blank\">here</a>"
-msgstr ""
-
msgid "Edit Blacklist"
msgstr "编辑黑名单"
msgid "Last Run"
msgstr "最后运行"
-msgid ""
-"List URLs and Shallalist category selections are configurable in the "
-"'Advanced' section.<br />"
-msgstr "列表 URL 和 Shallalist 类别选择可在“高级”选项卡中配置。<br />"
-
msgid ""
"List of available network interfaces. Usually the startup will be triggered "
"by the 'wan' interface.<br />"
"Please note: this needs additional 'msmtp' package installation and setup."
msgstr ""
-msgid "Please update your adblock config file to use this package.<br />"
-msgstr ""
-
msgid "Query"
msgstr "查询"
msgstr ""
msgid ""
-"Size of the download queue to handle downloads & list processing in parallel "
-"(default '4').<br />"
+"Size of the download queue to handle downloads & list processing in "
+"parallel (default '4').<br />"
msgstr ""
msgid "Startup Trigger"
msgid "Target directory for the generated blocklist 'adb_list.overall'."
msgstr "生成的 blocklist 'adb_list.overall'的目标目录。"
-msgid "The file size is too large for online editing in LuCI (> 512 KB)."
-msgstr "文件大小太大,无法在 LuCI(> 512 KB)中进行在线编辑。"
+msgid "The file size is too large for online editing in LuCI (≥ 100 KB)."
+msgstr ""
msgid ""
"This form allows you to modify the content of the adblock blacklist (%s)."
"only."
msgstr "此表单显示系统日志输出,仅针对 adblock 相关的消息进行了预筛选。"
-msgid "This section contains no values yet"
-msgstr ""
-
msgid ""
"To overwrite the default path use the 'DNS Directory' option in the extra "
"section below."
msgid "running"
msgstr ""
+#~ msgid "Available blocklist sources."
+#~ msgstr "可用的 blocklist 来源。"
+
+#~ msgid ""
+#~ "List URLs and Shallalist category selections are configurable in the "
+#~ "'Advanced' section.<br />"
+#~ msgstr "列表 URL 和 Shallalist 类别选择可在“高级”选项卡中配置。<br />"
+
+#~ msgid "The file size is too large for online editing in LuCI (> 512 KB)."
+#~ msgstr "文件大小太大,无法在 LuCI(> 512 KB)中进行在线编辑。"
msgid "-------"
msgstr "-------"
+msgid ""
+"<b>Caution:</b> To prevent OOM exceptions on low memory devices with less "
+"than 64 MB free RAM, please only select a few of them!"
+msgstr ""
+
msgid "Adblock"
msgstr "Adblock"
msgid "Advanced"
msgstr "高階"
-msgid "Available blocklist sources."
-msgstr "可用的 blocklist 來源。"
-
msgid "Backup Directory"
msgstr "備份目錄"
"domains except those listed in the whitelist file.<br />"
msgstr ""
-msgid ""
-"Caution: To prevent OOM exceptions on low memory devices with less than 64 "
-"MB free RAM, please do not select more than five blocklist sources!"
+msgid "Categories"
msgstr ""
msgid ""
msgid "Download Utility (SSL Library)"
msgstr "下載實用程式(SSL 庫)"
-msgid ""
-"During opkg package installation use the '--force-maintainer' option to "
-"overwrite the pre-existing config file or download a fresh default config "
-"from <a href=\"%s\" target=\"_blank\">here</a>"
-msgstr ""
-
msgid "Edit Blacklist"
msgstr "編輯黑名單"
msgid "Last Run"
msgstr "最後執行"
-msgid ""
-"List URLs and Shallalist category selections are configurable in the "
-"'Advanced' section.<br />"
-msgstr "列表 URL 和 Shallalist 類別選擇可在“高階”選項卡中配置。<br />"
-
msgid ""
"List of available network interfaces. Usually the startup will be triggered "
"by the 'wan' interface.<br />"
"Please note: this needs additional 'msmtp' package installation and setup."
msgstr ""
-msgid "Please update your adblock config file to use this package.<br />"
-msgstr ""
-
msgid "Query"
msgstr "查詢"
msgstr ""
msgid ""
-"Size of the download queue to handle downloads & list processing in parallel "
-"(default '4').<br />"
+"Size of the download queue to handle downloads & list processing in "
+"parallel (default '4').<br />"
msgstr ""
msgid "Startup Trigger"
msgid "Target directory for the generated blocklist 'adb_list.overall'."
msgstr "生成的 blocklist 'adb_list.overall'的目標目錄。"
-msgid "The file size is too large for online editing in LuCI (> 512 KB)."
-msgstr "檔案大小太大,無法在 LuCI(> 512 KB)中進行線上編輯。"
+msgid "The file size is too large for online editing in LuCI (≥ 100 KB)."
+msgstr ""
msgid ""
"This form allows you to modify the content of the adblock blacklist (%s)."
"only."
msgstr "此表單顯示系統日誌輸出,僅針對 adblock 相關的訊息進行了預篩選。"
-msgid "This section contains no values yet"
-msgstr ""
-
msgid ""
"To overwrite the default path use the 'DNS Directory' option in the extra "
"section below."
msgid "running"
msgstr ""
+#~ msgid "Available blocklist sources."
+#~ msgstr "可用的 blocklist 來源。"
+
+#~ msgid ""
+#~ "List URLs and Shallalist category selections are configurable in the "
+#~ "'Advanced' section.<br />"
+#~ msgstr "列表 URL 和 Shallalist 類別選擇可在“高階”選項卡中配置。<br />"
+
+#~ msgid "The file size is too large for online editing in LuCI (> 512 KB)."
+#~ msgstr "檔案大小太大,無法在 LuCI(> 512 KB)中進行線上編輯。"
msgid "Check IP rules"
msgstr "IP ルールのチェック"
+msgid "Check link quality"
+msgstr ""
+
msgid "Check routing table"
msgstr "ルーティング テーブルのチェック"
"スは使用できません。<br />インターフェースには、設定済みのメンバーやポリ"
"シー、ルールと同じ名前を使用することはできません。"
+msgid "Max packet latency [ms]"
+msgstr ""
+
+msgid "Max packet loss [%]"
+msgstr ""
+
msgid ""
"May be entered as a single or multiple port(s) (eg \"22\" or \"80,443\") or "
"as a portrange (eg \"1024:2048\") without quotes"
msgid "Metric"
msgstr "メトリック"
+msgid "Min packet latency [ms]"
+msgstr ""
+
+msgid "Min packet loss [%]"
+msgstr ""
+
msgid ""
"Name of IPset rule. Requires IPset rule in /etc/dnsmasq.conf (eg \"ipset=/"
"youtube.com/youtube\")"
msgid "Check IP rules"
msgstr "Проверить правила IP"
+msgid "Check link quality"
+msgstr ""
+
msgid "Check routing table"
msgstr "Проверить таблицу маршрутизации"
"символы A-Z, a-z, 0-9, _ и пробелы.<br />Интерфейсы не могут иметь "
"одинаковые имена с настроенными узлами, политиками или правилами."
+msgid "Max packet latency [ms]"
+msgstr ""
+
+msgid "Max packet loss [%]"
+msgstr ""
+
msgid ""
"May be entered as a single or multiple port(s) (eg \"22\" or \"80,443\") or "
"as a portrange (eg \"1024:2048\") without quotes"
msgid "Metric"
msgstr "Метрика"
+msgid "Min packet latency [ms]"
+msgstr ""
+
+msgid "Min packet loss [%]"
+msgstr ""
+
msgid ""
"Name of IPset rule. Requires IPset rule in /etc/dnsmasq.conf (eg \"ipset=/"
"youtube.com/youtube\")"
msgid "Check IP rules"
msgstr ""
+msgid "Check link quality"
+msgstr ""
+
msgid "Check routing table"
msgstr ""
"rules"
msgstr ""
+msgid "Max packet latency [ms]"
+msgstr ""
+
+msgid "Max packet loss [%]"
+msgstr ""
+
msgid ""
"May be entered as a single or multiple port(s) (eg \"22\" or \"80,443\") or "
"as a portrange (eg \"1024:2048\") without quotes"
msgid "Metric"
msgstr ""
+msgid "Min packet latency [ms]"
+msgstr ""
+
+msgid "Min packet loss [%]"
+msgstr ""
+
msgid ""
"Name of IPset rule. Requires IPset rule in /etc/dnsmasq.conf (eg \"ipset=/"
"youtube.com/youtube\")"
msgid "Check IP rules"
msgstr "检查 IP 规则"
+msgid "Check link quality"
+msgstr ""
+
msgid "Check routing table"
msgstr "检查路由表"
"的接口名称匹配。<br />名称允许包括 A-Z、a-z、0-9、_ 但是不能有空格。<br />接"
"口不应该与成员、策略、规则中的任意一个设置项使用相同的名称"
+msgid "Max packet latency [ms]"
+msgstr ""
+
+msgid "Max packet loss [%]"
+msgstr ""
+
msgid ""
"May be entered as a single or multiple port(s) (eg \"22\" or \"80,443\") or "
"as a portrange (eg \"1024:2048\") without quotes"
msgid "Metric"
msgstr "跃点数"
+msgid "Min packet latency [ms]"
+msgstr ""
+
+msgid "Min packet loss [%]"
+msgstr ""
+
msgid ""
"Name of IPset rule. Requires IPset rule in /etc/dnsmasq.conf (eg \"ipset=/"
"youtube.com/youtube\")"
msgid "Check IP rules"
msgstr "檢查 IP 規則"
+msgid "Check link quality"
+msgstr ""
+
msgid "Check routing table"
msgstr "檢查路由表"
"中的介面名稱匹配。<br />名稱允許包括 A-Z、a-z、0-9、_ 但是不能有空格。<br />"
"介面不應該與成員、策略、規則中的任意一個設定項使用相同的名稱"
+msgid "Max packet latency [ms]"
+msgstr ""
+
+msgid "Max packet loss [%]"
+msgstr ""
+
msgid ""
"May be entered as a single or multiple port(s) (eg \"22\" or \"80,443\") or "
"as a portrange (eg \"1024:2048\") without quotes"
msgid "Metric"
msgstr "躍點數"
+msgid "Min packet latency [ms]"
+msgstr ""
+
+msgid "Min packet loss [%]"
+msgstr ""
+
msgid ""
"Name of IPset rule. Requires IPset rule in /etc/dnsmasq.conf (eg \"ipset=/"
"youtube.com/youtube\")"
msgid "Actions"
msgstr "操作"
-msgid "Add Interface"
-msgstr "インターフェースの追加"
-
msgid "Add Uplink"
msgstr "アップリンクの追加"
msgid "Connection Limit"
msgstr "接続制限"
-msgid "Create Uplink Interface"
-msgstr "アップリンク インターフェースの作成"
+msgid "Create Uplink interface"
+msgstr ""
msgid ""
"Create a new wireless wan uplink interface, configure it to use dhcp and"
"このフォームには、システムログ内の Travelmate に関するメッセージのみが表示さ"
"れます。"
+msgid "This step has only to be done once."
+msgstr ""
+
msgid "Travelmate"
msgstr "Travelmate"
msgid "Uplink SSID"
msgstr "アップリンク SSID"
-msgid "Uplink interface"
-msgstr "アップリンク インターフェース"
-
msgid "View AP QR-Codes"
msgstr "AP QR-コードを確認"
msgid "Wireless Stations"
msgstr "無線ステーション"
-msgid ""
-"add it to the wan zone of the firewall. This step has only to be done once."
+msgid "add it to the wan zone of the firewall.<br />"
msgstr ""
-"ファイアウォールの wan ゾーンに追加します。このステップは、一度だけ実行される"
-"必要があります。"
msgid "hidden"
msgstr "(不明)"
msgid "n/a"
msgstr "利用不可"
+#~ msgid "Add Interface"
+#~ msgstr "インターフェースの追加"
+
+#~ msgid "Create Uplink Interface"
+#~ msgstr "アップリンク インターフェースの作成"
+
+#~ msgid "Uplink interface"
+#~ msgstr "アップリンク インターフェース"
+
+#~ msgid ""
+#~ "add it to the wan zone of the firewall. This step has only to be done "
+#~ "once."
+#~ msgstr ""
+#~ "ファイアウォールの wan ゾーンに追加します。このステップは、一度だけ実行さ"
+#~ "れる必要があります。"
+
#~ msgid "Enable 'automatic' mode"
#~ msgstr "'automatic' モードの有効化"
msgid "Actions"
msgstr ""
-msgid "Add Interface"
-msgstr ""
-
msgid "Add Uplink"
msgstr ""
msgid "Connection Limit"
msgstr ""
-msgid "Create Uplink Interface"
+msgid "Create Uplink interface"
msgstr ""
msgid ""
"messages only."
msgstr ""
+msgid "This step has only to be done once."
+msgstr ""
+
msgid "Travelmate"
msgstr "Travelmate"
msgid "Uplink SSID"
msgstr ""
-msgid "Uplink interface"
-msgstr ""
-
msgid "View AP QR-Codes"
msgstr ""
msgid "Wireless Stations"
msgstr ""
-msgid ""
-"add it to the wan zone of the firewall. This step has only to be done once."
+msgid "add it to the wan zone of the firewall.<br />"
msgstr ""
msgid "hidden"
msgid "Actions"
msgstr "Действия"
-msgid "Add Interface"
-msgstr "Добавить интерфейс"
-
msgid "Add Uplink"
msgstr "Подключение к сети"
msgid "Connection Limit"
msgstr "Ограничение соединений"
-msgid "Create Uplink Interface"
-msgstr "Создать интерфейс сети"
+msgid "Create Uplink interface"
+msgstr ""
msgid ""
"Create a new wireless wan uplink interface, configure it to use dhcp and"
"Страница просмотра системного журнала, показаны только события связанные с "
"работой утилиты TravelMate."
+msgid "This step has only to be done once."
+msgstr ""
+
msgid "Travelmate"
msgstr "TravelMate"
msgid "Uplink SSID"
msgstr "SSID внешней сети"
-msgid "Uplink interface"
-msgstr "Интерфейс внешней сети"
-
msgid "View AP QR-Codes"
msgstr ""
msgid "Wireless Stations"
msgstr "Клиенты беспроводной сети"
-msgid ""
-"add it to the wan zone of the firewall. This step has only to be done once."
-msgstr "добавить в wan зону межсетевого экрана. Можно сделать только один раз."
+msgid "add it to the wan zone of the firewall.<br />"
+msgstr ""
msgid "hidden"
msgstr "скрытый"
msgid "n/a"
msgstr "нет данных"
+#~ msgid "Add Interface"
+#~ msgstr "Добавить интерфейс"
+
+#~ msgid "Create Uplink Interface"
+#~ msgstr "Создать интерфейс сети"
+
+#~ msgid "Uplink interface"
+#~ msgstr "Интерфейс внешней сети"
+
+#~ msgid ""
+#~ "add it to the wan zone of the firewall. This step has only to be done "
+#~ "once."
+#~ msgstr ""
+#~ "добавить в wan зону межсетевого экрана. Можно сделать только один раз."
+
#~ msgid "Enable 'automatic' mode"
#~ msgstr "Включить режим 'автоматически'"
msgid "Actions"
msgstr ""
-msgid "Add Interface"
-msgstr ""
-
msgid "Add Uplink"
msgstr ""
msgid "Connection Limit"
msgstr ""
-msgid "Create Uplink Interface"
+msgid "Create Uplink interface"
msgstr ""
msgid ""
"messages only."
msgstr ""
+msgid "This step has only to be done once."
+msgstr ""
+
msgid "Travelmate"
msgstr ""
msgid "Uplink SSID"
msgstr ""
-msgid "Uplink interface"
-msgstr ""
-
msgid "View AP QR-Codes"
msgstr ""
msgid "Wireless Stations"
msgstr ""
-msgid ""
-"add it to the wan zone of the firewall. This step has only to be done once."
+msgid "add it to the wan zone of the firewall.<br />"
msgstr ""
msgid "hidden"
msgid "Any zone"
msgstr "Qualsevol zona"
-msgid "Apply"
-msgstr "Aplica"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Aplicant els canvis"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Canvis aplicats."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Canvia la paraula clau de l'administrador per accedir al dispositiu"
msgid "Channel"
msgstr "Canal"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Comprovació"
msgid "Configuration"
msgstr "Configuració"
-msgid "Configuration applied."
-msgstr "S'ha aplicat la configuració."
-
msgid "Configuration files will be kept."
msgstr "Es mantindran els fitxers de configuració."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Confirmació"
msgid "Connections"
msgstr "Connexions"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "País"
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnòstics"
msgid "Discard upstream RFC1918 responses"
msgstr "Descarta les respostes RFC1918 des de dalt"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Mostrant només els paquets que contenen"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Fitxer"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "Revert"
msgstr "Reverteix"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Arrel"
msgid "Save & Apply"
msgstr "Desa i aplica"
-msgid "Save & Apply"
-msgstr "Desa i aplica"
-
msgid "Scan"
msgstr "Escaneja"
msgid "Start priority"
msgstr "Prioritat d'inici"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Arrencada"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"<br />Fes clic a \"Procedeix\" a continuació per començar el procés "
"d'escriptura a la memòria flaix."
-msgid "The following changes have been committed"
-msgstr "S'han comès els següents canvis"
-
msgid "The following changes have been reverted"
msgstr "S'han desfet els següents canvis"
msgid "There are no active leases."
msgstr "No hi ha arrendaments actius."
-msgid "There are no pending changes to apply!"
-msgstr "No hi ha canvis pendents per aplicar!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "No hi ha canvis pendents per revertir!"
msgid "Waiting for command to complete..."
msgstr "Esperant que s'acabi l'ordre..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr "Esperant el dispositiu..."
msgid "« Back"
msgstr "« Enrere"
+#~ msgid "Apply"
+#~ msgstr "Aplica"
+
+#~ msgid "Applying changes"
+#~ msgstr "Aplicant els canvis"
+
+#~ msgid "Configuration applied."
+#~ msgstr "S'ha aplicat la configuració."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Desa i aplica"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "S'han comès els següents canvis"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "No hi ha canvis pendents per aplicar!"
+
#~ msgid "Action"
#~ msgstr "Acció"
msgid "Any zone"
msgstr "Libovolná zóna"
-msgid "Apply"
-msgstr "Použít"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Probíhá uplatňování nastavení"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Změny aplikovány."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Změní administrátorské heslo pro přístup k zařízení"
msgid "Channel"
msgstr "Kanál"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Kontrola"
msgid "Configuration"
msgstr "Nastavení"
-msgid "Configuration applied."
-msgstr "Nastavení uplatněno."
-
msgid "Configuration files will be kept."
msgstr "Konfigurační soubory budou zachovány."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Ověření"
msgid "Connections"
msgstr "Připojení"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Země"
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnostika"
msgid "Discard upstream RFC1918 responses"
msgstr "Vyřadit upstream RFC1918 odpovědi"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Zobrazeny pouze balíčky obsahující"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Soubor"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "Vypnutí prodlevy"
msgid "Revert"
msgstr "Vrátit zpět"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Root"
msgid "Save & Apply"
msgstr "Uložit & použít"
-msgid "Save & Apply"
-msgstr "Uložit & použít"
-
msgid "Scan"
msgstr "Skenovat"
msgid "Start priority"
msgstr "Priorita spouštění"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Po spuštění"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"souboru s originálním souborem pro zajištění integrity dat.<br /> Kliknutím "
"na \"Pokračovat\" spustíte proceduru flashování."
-msgid "The following changes have been committed"
-msgstr "Následující změny byly provedeny"
-
msgid "The following changes have been reverted"
msgstr "Následující změny byly vráceny"
msgid "There are no active leases."
msgstr "Nejsou žádné aktivní zápůjčky."
-msgid "There are no pending changes to apply!"
-msgstr "Nejsou zde žádné nevyřízené změny k aplikaci!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Nejsou zde žádné nevyřízené změny k navrácení!"
msgid "Waiting for command to complete..."
msgstr "Čekání na dokončení příkazu..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "« Zpět"
+#~ msgid "Apply"
+#~ msgstr "Použít"
+
+#~ msgid "Applying changes"
+#~ msgstr "Probíhá uplatňování nastavení"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Nastavení uplatněno."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Uložit & použít"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "Následující změny byly provedeny"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "Nejsou zde žádné nevyřízené změny k aplikaci!"
+
#~ msgid "Action"
#~ msgstr "Akce"
msgid "Any zone"
msgstr "Beliebige Zone"
-msgid "Apply"
-msgstr "Anwenden"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Änderungen werden angewandt"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Änderungen angewendet."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Ändert das Administratorpasswort für den Zugriff auf dieses Gerät"
msgid "Channel"
msgstr "Kanal"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Prüfen"
msgid "Configuration"
msgstr "Konfiguration"
-msgid "Configuration applied."
-msgstr "Konfiguration angewendet."
-
msgid "Configuration files will be kept."
msgstr "Konfigurationsdateien sichern"
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Bestätigung"
msgid "Connections"
msgstr "Verbindungen"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Land"
msgid "Device unreachable"
msgstr "Das Gerät ist nicht erreichbar"
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnosen"
msgid "Discard upstream RFC1918 responses"
msgstr "Eingehende RFC1918-Antworten verwerfen"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Nur Pakete mit folgendem Inhalt anzeigen"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Datei"
msgid "Obfuscated Password"
msgstr "Chiffriertes Passwort"
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "Verzögerung für Ausschalt-Zustand"
msgid "Revert"
msgstr "Verwerfen"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Root"
msgid "Save & Apply"
msgstr "Speichern & Anwenden"
-msgid "Save & Apply"
-msgstr "Speichern & Anwenden"
-
msgid "Scan"
msgstr "Scan"
msgid "Start priority"
msgstr "Startpriorität"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Systemstart"
"Die Konfigurationsdatei konnte aufgrund der folgenden Fehler nicht geladen "
"werden:"
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"Integrität sicherzustellen.<br /> Klicken Sie \"Fortfahren\" um die Flash-"
"Prozedur zu starten."
-msgid "The following changes have been committed"
-msgstr "Die folgenden Änderungen wurden angewendet"
-
msgid "The following changes have been reverted"
msgstr "Die folgenden Änderungen wurden verworfen"
msgid "There are no active leases."
msgstr "Es gibt z.Z. keine aktiven Leases."
-msgid "There are no pending changes to apply!"
-msgstr "Es gibt keine ausstehenen Änderungen anzuwenden!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Es gibt keine ausstehenen Änderungen zurückzusetzen!"
msgid "Waiting for command to complete..."
msgstr "Der Befehl wird ausgeführt..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr "Warte auf Gerät..."
msgid "« Back"
msgstr "« Zurück"
+#~ msgid "Apply"
+#~ msgstr "Anwenden"
+
+#~ msgid "Applying changes"
+#~ msgstr "Änderungen werden angewandt"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Konfiguration angewendet."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Speichern & Anwenden"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "Die folgenden Änderungen wurden angewendet"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "Es gibt keine ausstehenen Änderungen anzuwenden!"
+
#~ msgid "Action"
#~ msgstr "Aktion"
msgid "Any zone"
msgstr "Οιαδήποτε ζώνη"
-msgid "Apply"
-msgstr "Εφαρμογή"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Εφαρμογή αλλαγών"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Αλλαγές εφαρμόστηκαν."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Αλλάζει τον κωδικό διαχειριστή για πρόσβαση στη συσκευή"
msgid "Channel"
msgstr "Κανάλι"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Έλεγχος"
msgid "Configuration"
msgstr "Παραμετροποίηση"
-msgid "Configuration applied."
-msgstr "Η Παραμετροποίηση εφαρμόστηκε."
-
msgid "Configuration files will be kept."
msgstr "Τα αρχεία παραμετροποίησης θα διατηρηθούν."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Επιβεβαίωση"
msgid "Connections"
msgstr "Συνδέσεις"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Χώρα"
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Διαγνωστικά"
msgid "Discard upstream RFC1918 responses"
msgstr "Αγνόησε τις απαντήσεις ανοδικής ροής RFC1918"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Εμφάνιση μόνο πακέτων που περιέχουν"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Αρχείο"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "Revert"
msgstr "Αναίρεση"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Root"
msgid "Save & Apply"
msgstr "Αποθήκευση & Εφαρμογή"
-msgid "Save & Apply"
-msgstr "Αποθήκευση & Εφαρμογή"
-
msgid "Scan"
msgstr "Σάρωση"
msgid "Start priority"
msgstr "Προτεραιότητα εκκίνησης"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Εκκίνηση"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"\"Proceed\" below to start the flash procedure."
msgstr ""
-msgid "The following changes have been committed"
-msgstr "Οι παρακάτω αλλαγές έχουν υποβληθεί"
-
msgid "The following changes have been reverted"
msgstr "Οι παρακάτω αλλαγές έχουν αναιρεθεί"
msgid "There are no active leases."
msgstr "Δεν υπάρχουν ενεργά leases."
-msgid "There are no pending changes to apply!"
+msgid "There are no changes to apply."
msgstr ""
msgid "There are no pending changes to revert!"
msgid "Waiting for command to complete..."
msgstr ""
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "« Πίσω"
+#~ msgid "Apply"
+#~ msgstr "Εφαρμογή"
+
+#~ msgid "Applying changes"
+#~ msgstr "Εφαρμογή αλλαγών"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Η Παραμετροποίηση εφαρμόστηκε."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Αποθήκευση & Εφαρμογή"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "Οι παρακάτω αλλαγές έχουν υποβληθεί"
+
#~ msgid "Action"
#~ msgstr "Ενέργεια"
msgid "Any zone"
msgstr "Any zone"
-msgid "Apply"
-msgstr "Apply"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Applying changes"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Changes applied."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Changes the administrator password for accessing the device"
msgid "Channel"
msgstr "Channel"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Check"
msgid "Configuration"
msgstr "Configuration"
-msgid "Configuration applied."
-msgstr "Configuration applied."
-
msgid "Configuration files will be kept."
msgstr "Configuration files will be kept."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Confirmation"
msgid "Connections"
msgstr "Connections"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Country"
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnostics"
msgid "Discard upstream RFC1918 responses"
msgstr ""
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr ""
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr ""
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "Revert"
msgstr "Revert"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr ""
msgid "Save & Apply"
msgstr "Save & Apply"
-msgid "Save & Apply"
-msgstr ""
-
msgid "Scan"
msgstr "Scan"
msgid "Start priority"
msgstr "Start priority"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr ""
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"\"Proceed\" below to start the flash procedure."
msgstr ""
-msgid "The following changes have been committed"
-msgstr ""
-
msgid "The following changes have been reverted"
msgstr "The following changes have been reverted"
msgid "There are no active leases."
msgstr ""
-msgid "There are no pending changes to apply!"
+msgid "There are no changes to apply."
msgstr ""
msgid "There are no pending changes to revert!"
msgid "Waiting for command to complete..."
msgstr ""
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "« Back"
+#~ msgid "Apply"
+#~ msgstr "Apply"
+
+#~ msgid "Applying changes"
+#~ msgstr "Applying changes"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Configuration applied."
+
#~ msgid "Action"
#~ msgstr "Action"
msgid "Any zone"
msgstr "Cualquier zona"
-msgid "Apply"
-msgstr "Aplicar"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Aplicando cambios"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Cambios aplicados."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Cambie la contraseña del administrador para acceder al dispositivo"
msgid "Channel"
msgstr "Canal"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Comprobar"
msgid "Configuration"
msgstr "Configuración"
-msgid "Configuration applied."
-msgstr "Configuración establecida."
-
msgid "Configuration files will be kept."
msgstr "Se mantendrán los ficheros de configuración."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Confirmación"
msgid "Connections"
msgstr "Conexiones"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "País"
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnósticos"
msgid "Discard upstream RFC1918 responses"
msgstr "Descartar respuestas RFC1918 salientes"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Mostrar sólo paquete que contienen"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Fichero"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "Retraso de desconexión"
msgid "Revert"
msgstr "Anular"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Raíz"
msgid "Save & Apply"
msgstr "Guardar y aplicar"
-msgid "Save & Apply"
-msgstr "Guardar y aplicar"
-
msgid "Scan"
msgstr "Explorar"
msgid "Start priority"
msgstr "Prioridad de arranque"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Arranque"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"coinciden con los del original.<br />Pulse \"Proceder\" para empezar el "
"grabado."
-msgid "The following changes have been committed"
-msgstr "Se han hecho los siguientes cambios"
-
msgid "The following changes have been reverted"
msgstr "Se han anulado los siguientes cambios"
msgid "There are no active leases."
msgstr "Sin cesiones activas."
-msgid "There are no pending changes to apply!"
-msgstr "¡No hay cambios pendientes!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "¡No hay cambios a anular!"
msgid "Waiting for command to complete..."
msgstr "Esperando a que termine el comando..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "« Volver"
+#~ msgid "Apply"
+#~ msgstr "Aplicar"
+
+#~ msgid "Applying changes"
+#~ msgstr "Aplicando cambios"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Configuración establecida."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Guardar y aplicar"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "Se han hecho los siguientes cambios"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "¡No hay cambios pendientes!"
+
#~ msgid "Action"
#~ msgstr "Acción"
msgid "Any zone"
msgstr "N'importe quelle zone"
-msgid "Apply"
-msgstr "Appliquer"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Changements en cours"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Changements appliqués."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Change le mot de passe administrateur pour accéder à l'équipement"
msgid "Channel"
msgstr "Canal"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Vérification"
msgid "Configuration"
msgstr "Configuration"
-msgid "Configuration applied."
-msgstr "Configuration appliquée."
-
msgid "Configuration files will be kept."
msgstr "Les fichiers de configuration seront préservés."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Confirmation"
msgid "Connections"
msgstr "Connexions"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Pays"
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnostics"
msgid "Discard upstream RFC1918 responses"
msgstr "Jeter les réponses en RFC1918 amont"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "N'afficher que les paquets contenant"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Fichier"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "Durée éteinte"
msgid "Revert"
msgstr "Revenir"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Racine"
msgid "Save & Apply"
msgstr "Sauvegarder et Appliquer"
-msgid "Save & Apply"
-msgstr "Sauvegarder et appliquer"
-
msgid "Scan"
msgstr "Scan"
msgid "Start priority"
msgstr "Priorité de démarrage"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Démarrage"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"assurer de son intégrité.<br /> Cliquez sur \"Continuer\" pour lancer la "
"procédure d'écriture."
-msgid "The following changes have been committed"
-msgstr "Les changements suivants ont été appliqués"
-
msgid "The following changes have been reverted"
msgstr "Les changements suivants ont été annulés"
msgid "There are no active leases."
msgstr "Il n'y a aucun bail actif."
-msgid "There are no pending changes to apply!"
-msgstr "Il n'y a aucun changement en attente d'être appliqués !"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Il n'y a aucun changement à annuler !"
msgid "Waiting for command to complete..."
msgstr "En attente de la fin de la commande..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "« Retour"
+#~ msgid "Apply"
+#~ msgstr "Appliquer"
+
+#~ msgid "Applying changes"
+#~ msgstr "Changements en cours"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Configuration appliquée."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Sauvegarder et appliquer"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "Les changements suivants ont été appliqués"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "Il n'y a aucun changement en attente d'être appliqués !"
+
#~ msgid "Action"
#~ msgstr "Action"
msgid "Any zone"
msgstr "כל תחום"
-msgid "Apply"
-msgstr "החל"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "מחיל הגדרות"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "השינויים הוחלו"
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "משנה את סיסמת המנהל לגישה למכשיר"
msgid "Channel"
msgstr "ערוץ"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "לבדוק"
msgid "Configuration"
msgstr "הגדרות"
-msgid "Configuration applied."
-msgstr "הגדרות הוחלו"
-
msgid "Configuration files will be kept."
msgstr "קבצי ההגדרות ישמרו."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "אישור"
msgid "Connections"
msgstr "חיבורים"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "מדינה"
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "אבחון"
msgid "Discard upstream RFC1918 responses"
msgstr ""
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "מציג רק חבילות המכילות"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr ""
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "Revert"
msgstr ""
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr ""
msgid "Save & Apply"
msgstr ""
-msgid "Save & Apply"
-msgstr ""
-
msgid "Scan"
msgstr ""
msgid "Start priority"
msgstr ""
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "אתחול"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"\"Proceed\" below to start the flash procedure."
msgstr ""
-msgid "The following changes have been committed"
-msgstr ""
-
msgid "The following changes have been reverted"
msgstr ""
msgid "There are no active leases."
msgstr ""
-msgid "There are no pending changes to apply!"
+msgid "There are no changes to apply."
msgstr ""
msgid "There are no pending changes to revert!"
msgid "Waiting for command to complete..."
msgstr ""
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "<< אחורה"
+#~ msgid "Apply"
+#~ msgstr "החל"
+
+#~ msgid "Applying changes"
+#~ msgstr "מחיל הגדרות"
+
+#~ msgid "Configuration applied."
+#~ msgstr "הגדרות הוחלו"
+
#~ msgid "Action"
#~ msgstr "פעולה"
msgid "Any zone"
msgstr "Bármelyik zóna"
-msgid "Apply"
-msgstr "Alkalmaz"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Módosítások alkalmazása"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "A módosítások alkalmazva."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr ""
"Itt módosíthatja az eszköz eléréséhez szükséges adminisztrátori jelszót"
msgid "Channel"
msgstr "Csatorna"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Ellenőrzés"
msgid "Configuration"
msgstr "Beállítás"
-msgid "Configuration applied."
-msgstr "Beállítások alkalmazva."
-
msgid "Configuration files will be kept."
msgstr "A konfigurációs fájlok megmaradnak."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Megerősítés"
msgid "Connections"
msgstr "Kapcsolatok"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Ország"
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnosztika"
msgid "Discard upstream RFC1918 responses"
msgstr "Beérkező RFC1918 DHCP válaszok elvetése. "
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Csak azon csomagok megjelenítése, amelyek tartalmazzák"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Fájl"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "Kikapcsolt állapot késleltetés"
msgid "Revert"
msgstr "Visszavonás"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Gyökérkönyvtár"
msgid "Save & Apply"
msgstr "Mentés & Alkalmazás"
-msgid "Save & Apply"
-msgstr "Mentés & Alkalmazás"
-
msgid "Scan"
msgstr "Felderítés"
msgid "Start priority"
msgstr "Indítás prioritása"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Rendszerindítás"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"ellenőrzéséhez.<br />Kattintson az alábbi \"Folytatás\" gombra a flash-elési "
"eljárás elindításához."
-msgid "The following changes have been committed"
-msgstr "A következő módosítások lettek alkalmazva"
-
msgid "The following changes have been reverted"
msgstr "A következő módosítások lettek visszavonva"
msgid "There are no active leases."
msgstr "Nincsenek aktív bérletek."
-msgid "There are no pending changes to apply!"
-msgstr "Nincsenek alkalmazásra váró módosítások!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Nincsenek visszavonásra váró változtatások!"
msgid "Waiting for command to complete..."
msgstr "Várakozás a parancs befejezésére..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "« Vissza"
+#~ msgid "Apply"
+#~ msgstr "Alkalmaz"
+
+#~ msgid "Applying changes"
+#~ msgstr "Módosítások alkalmazása"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Beállítások alkalmazva."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Mentés & Alkalmazás"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "A következő módosítások lettek alkalmazva"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "Nincsenek alkalmazásra váró módosítások!"
+
#~ msgid "Action"
#~ msgstr "Művelet"
msgid "Any zone"
msgstr "Qualsiasi Zona"
-msgid "Apply"
-msgstr "Applica"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Applica modifiche"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Modifiche applicate."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Cambia la password di amministratore per accedere al dispositivo"
msgid "Channel"
msgstr "Canale"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Verifica"
msgid "Configuration"
msgstr "Configurazione"
-msgid "Configuration applied."
-msgstr "Configurazione salvata."
-
msgid "Configuration files will be kept."
msgstr "I file di configurazione verranno mantenuti."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Conferma"
msgid "Connections"
msgstr "Connessioni"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Nazione"
msgid "Device unreachable"
msgstr "Dispositivo irraggiungibile"
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnostica"
msgid "Discard upstream RFC1918 responses"
msgstr "Ignora risposte RFC1918 upstream"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Visualizza solo i pacchetti contenenti"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "File"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "Revert"
msgstr "Ripristina"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr ""
msgid "Save & Apply"
msgstr "Salva & applica"
-msgid "Save & Apply"
-msgstr "Salva & Applica"
-
msgid "Scan"
msgstr "Scan"
msgid "Start priority"
msgstr "Priorità di avvio"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Avvio"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"\"Proceed\" below to start the flash procedure."
msgstr ""
-msgid "The following changes have been committed"
-msgstr ""
-
msgid "The following changes have been reverted"
msgstr "Le seguenti modifiche sono state annullate"
msgid "There are no active leases."
msgstr "Non ci sono contratti attivi."
-msgid "There are no pending changes to apply!"
-msgstr "Non ci sono cambiamenti pendenti da applicare!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Non ci sono cambiamenti pendenti da regredire"
msgid "Waiting for command to complete..."
msgstr "In attesa del comando da completare..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "« Indietro"
+#~ msgid "Apply"
+#~ msgstr "Applica"
+
+#~ msgid "Applying changes"
+#~ msgstr "Applica modifiche"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Configurazione salvata."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Salva & Applica"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "Non ci sono cambiamenti pendenti da applicare!"
+
#~ msgid "Action"
#~ msgstr "Azione"
msgid "Any zone"
msgstr "全てのゾーン"
-msgid "Apply"
-msgstr "適用"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "変更を適用"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "変更が適用されました。"
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "デバイスの管理者パスワードを変更します"
msgid "Channel"
msgstr "チャネル"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "チェック"
msgid "Configuration"
msgstr "設定"
-msgid "Configuration applied."
-msgstr "設定を適用しました。"
-
msgid "Configuration files will be kept."
msgstr "設定ファイルは保持されます。"
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "確認"
msgid "Connections"
msgstr "ネットワーク接続"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "国"
msgid "Device unreachable"
msgstr "デバイスに到達できません"
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "診断機能"
msgid "Discard upstream RFC1918 responses"
msgstr "RFC1918の応答を破棄します"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "右記の文字列を含んだパッケージのみを表示中"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "ファイル"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "消灯時間"
msgid "Revert"
msgstr "元に戻す"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "ルート"
msgid "Save & Apply"
msgstr "保存 & 適用"
-msgid "Save & Apply"
-msgstr "保存 & 適用"
-
msgid "Scan"
msgstr "スキャン"
msgid "Start priority"
msgstr "優先順位"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "スタートアップ"
msgid "The configuration file could not be loaded due to the following error:"
msgstr "設定ファイルは以下のエラーにより読み込めませんでした:"
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"イズです。オリジナルファイルと比較し、整合性を確認してください。<br />\"続行"
"\"ボタンをクリックすると、更新処理を開始します。"
-msgid "The following changes have been committed"
-msgstr "以下の変更が適用されました"
-
msgid "The following changes have been reverted"
msgstr "以下の変更が取り消されました"
msgid "There are no active leases."
msgstr "リース中のIPアドレスはありません。"
-msgid "There are no pending changes to apply!"
-msgstr "適用が未完了の変更はありません!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "復元が未完了の変更はありません!"
msgid "Waiting for command to complete..."
msgstr "コマンド実行中です..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr "デバイスを起動中です..."
msgid "« Back"
msgstr "« 戻る"
+
+#~ msgid "Apply"
+#~ msgstr "適用"
+
+#~ msgid "Applying changes"
+#~ msgstr "変更を適用"
+
+#~ msgid "Configuration applied."
+#~ msgstr "設定を適用しました。"
+
+#~ msgid "Save & Apply"
+#~ msgstr "保存 & 適用"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "以下の変更が適用されました"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "適用が未完了の変更はありません!"
msgid "Any zone"
msgstr ""
-msgid "Apply"
-msgstr "적용"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
+msgid "Apply unchecked"
msgstr ""
msgid ""
msgid "Changes applied."
msgstr ""
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "장비 접근을 위한 관리자 암호를 변경합니다"
msgid "Channel"
msgstr ""
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr ""
msgid "Configuration"
msgstr "설정"
-msgid "Configuration applied."
+msgid "Configuration files will be kept."
msgstr ""
-msgid "Configuration files will be kept."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
msgstr ""
msgid "Confirmation"
msgid "Connections"
msgstr "연결"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr ""
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "진단"
msgid "Discard upstream RFC1918 responses"
msgstr ""
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr ""
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr ""
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "Revert"
msgstr "변경 취소"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr ""
msgid "Save & Apply"
msgstr "저장 & 적용"
-msgid "Save & Apply"
-msgstr "저장 & 적용"
-
msgid "Scan"
msgstr "Scan 하기"
msgid "Start priority"
msgstr "시작 우선순위"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "시작 프로그램"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"\"Proceed\" below to start the flash procedure."
msgstr ""
-msgid "The following changes have been committed"
-msgstr ""
-
msgid "The following changes have been reverted"
msgstr "다음의 변경 사항들이 취소되었습니다"
msgid "There are no active leases."
msgstr ""
-msgid "There are no pending changes to apply!"
+msgid "There are no changes to apply."
msgstr ""
msgid "There are no pending changes to revert!"
msgid "Waiting for command to complete..."
msgstr "실행한 명령이 끝나기를 기다리는 중입니다..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr ""
+#~ msgid "Apply"
+#~ msgstr "적용"
+
+#~ msgid "Save & Apply"
+#~ msgstr "저장 & 적용"
+
#~ msgid "Leasetime"
#~ msgstr "임대 시간"
msgid "Any zone"
msgstr ""
-msgid "Apply"
-msgstr "Melaksanakan"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Melaksanakan perubahan"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Laman diterapkan."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr ""
msgid "Channel"
msgstr "Saluran"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr ""
msgid "Configuration"
msgstr "Konfigurasi"
-msgid "Configuration applied."
+msgid "Configuration files will be kept."
msgstr ""
-msgid "Configuration files will be kept."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
msgstr ""
msgid "Confirmation"
msgid "Connections"
msgstr ""
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr ""
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr ""
msgid "Discard upstream RFC1918 responses"
msgstr ""
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr ""
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr ""
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "Revert"
msgstr "Kembali"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr ""
msgid "Save & Apply"
msgstr "Simpan & Melaksanakan"
-msgid "Save & Apply"
-msgstr ""
-
msgid "Scan"
msgstr "Scan"
msgid "Start priority"
msgstr ""
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr ""
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"integriti data.<br /> Klik butang terus di bawah untuk memulakan prosedur "
"flash."
-msgid "The following changes have been committed"
-msgstr ""
-
msgid "The following changes have been reverted"
msgstr "Laman berikut telah kembali"
msgid "There are no active leases."
msgstr ""
-msgid "There are no pending changes to apply!"
+msgid "There are no changes to apply."
msgstr ""
msgid "There are no pending changes to revert!"
msgid "Waiting for command to complete..."
msgstr ""
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "« Kembali"
+#~ msgid "Apply"
+#~ msgstr "Melaksanakan"
+
+#~ msgid "Applying changes"
+#~ msgstr "Melaksanakan perubahan"
+
#~ msgid "Action"
#~ msgstr "Aksi"
msgid "Any zone"
msgstr "Alle soner"
-msgid "Apply"
-msgstr "Bruk"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Utfører endringer"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Endringer utført."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Endrer administrator passordet for tilgang til enheten"
msgid "Channel"
msgstr "Kanal"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Kontroller"
msgid "Configuration"
msgstr "Konfigurasjon"
-msgid "Configuration applied."
-msgstr "Konfigurasjons endring utført."
-
msgid "Configuration files will be kept."
msgstr "Konfigurasjonsfiler vil bli bevart."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Bekreftelse"
msgid "Connections"
msgstr "Tilkoblinger"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Land"
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Nettverksdiagnostikk"
msgid "Discard upstream RFC1918 responses"
msgstr "Forkast oppstrøms RFC1918 svar"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Viser bare pakker som inneholder"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Fil"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "Forsinkelse ved tilstand Av"
msgid "Revert"
msgstr "Tilbakestill"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Rot"
msgid "Save & Apply"
msgstr "Lagre & Aktiver"
-msgid "Save & Apply"
-msgstr "Lagre & Aktiver"
-
msgid "Scan"
msgstr "Skann"
msgid "Start priority"
msgstr "Start prioritet"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Oppstart"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"sammenlign dem med den opprinnelige filen for å sikre dataintegriteten.<br /"
"> Klikk \"Fortsett\" nedenfor for å starte flash prosedyren."
-msgid "The following changes have been committed"
-msgstr "Følgende endringer er foretatt"
-
msgid "The following changes have been reverted"
msgstr "Følgende endringer er forkastet"
msgid "There are no active leases."
msgstr "Det er ingen aktive leieavtaler."
-msgid "There are no pending changes to apply!"
-msgstr "Det finnes ingen endringer som kan utføres!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Det finnes ingen endriger å reversere!"
msgid "Waiting for command to complete..."
msgstr "Venter på at kommando fullføres..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "« Tilbake"
+#~ msgid "Apply"
+#~ msgstr "Bruk"
+
+#~ msgid "Applying changes"
+#~ msgstr "Utfører endringer"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Konfigurasjons endring utført."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Lagre & Aktiver"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "Følgende endringer er foretatt"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "Det finnes ingen endringer som kan utføres!"
+
#~ msgid "Action"
#~ msgstr "Handling"
msgid "Any zone"
msgstr "Qualquer zona"
-msgid "Apply"
-msgstr "Aplicar"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Aplicar as alterações"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Alterações aplicadas."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Muda a senha do administrador para acessar este dispositivo"
msgid "Channel"
msgstr "Canal"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Verificar"
msgid "Configuration"
msgstr "Configuração"
-msgid "Configuration applied."
-msgstr "Configuração aplicada."
-
msgid "Configuration files will be kept."
msgstr "Os arquivos de configuração serão mantidos."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Confirmação"
msgid "Connections"
msgstr "Conexões"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "País"
msgid "Device unreachable"
msgstr "Dispositivo não alcançável"
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnóstico"
msgstr ""
"Descartar respostas de servidores externos para redes privadas (RFC1918)"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Mostre somente os pacotes contendo"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Arquivo"
msgid "Obfuscated Password"
msgstr "Senha Ofuscada"
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "Atraso no estado de desligado"
msgid "Revert"
msgstr "Reverter"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Raiz"
msgid "Save & Apply"
msgstr "Salvar & Aplicar"
-msgid "Save & Apply"
-msgstr "Save & Aplicar"
-
msgid "Scan"
msgstr "Procurar"
msgid "Start priority"
msgstr "Prioridade de iniciação"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Iniciação"
msgstr ""
"O arquivo de configuração não pode ser carregado devido ao seguinte erro:"
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"garantir a integridade dos dados. <br /> Clique em \"Proceder\" para iniciar "
"o procedimetno de gravação."
-msgid "The following changes have been committed"
-msgstr "As seguintes mudanças foram aplicadas"
-
msgid "The following changes have been reverted"
msgstr "As seguintes alterações foram revertidas"
msgid "There are no active leases."
msgstr "Não existem alocações ativas."
-msgid "There are no pending changes to apply!"
-msgstr "Não existem modificações pendentes para aplicar!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Não existem modificações pendentes para reverter!"
msgid "Waiting for command to complete..."
msgstr "Esperando o término do comando..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr "Esperando pelo dispositivo..."
msgid "« Back"
msgstr "« Voltar"
+#~ msgid "Apply"
+#~ msgstr "Aplicar"
+
+#~ msgid "Applying changes"
+#~ msgstr "Aplicar as alterações"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Configuração aplicada."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Save & Aplicar"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "As seguintes mudanças foram aplicadas"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "Não existem modificações pendentes para aplicar!"
+
#~ msgid "Action"
#~ msgstr "Ação"
msgid "Any zone"
msgstr "Qualquer zona"
-msgid "Apply"
-msgstr "Aplicar"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "A aplicar as alterações"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Alterações aplicadas."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Altera a password de administrador para acesso ao dispositivo"
msgid "Channel"
msgstr "Canal"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Verificar"
msgid "Configuration"
msgstr "Configuração"
-msgid "Configuration applied."
-msgstr "Configuração aplicada."
-
msgid "Configuration files will be kept."
msgstr "Os ficheiros de configuração serão mantidos."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Confirmação"
msgid "Connections"
msgstr "Ligações"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "País"
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnósticos"
msgid "Discard upstream RFC1918 responses"
msgstr "Descartar respostas RFC1918 a montante"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Mostrar somente pacotes contendo"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Ficheiro"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "Atraso do Off-State"
msgid "Revert"
msgstr "Reverter"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr ""
msgid "Save & Apply"
msgstr "Salvar & Aplicar"
-msgid "Save & Apply"
-msgstr "Salvar & Aplicar"
-
msgid "Scan"
msgstr "Procurar"
msgid "Start priority"
msgstr "Prioridade de inicialização"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr ""
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"compare com o ficheiro original para assegurar a integração de dados.<br /> "
"Click em \"Proceder\" para iniciar o procedimento."
-msgid "The following changes have been committed"
-msgstr "As seguintes alterações foram escritas"
-
msgid "The following changes have been reverted"
msgstr "Foram recuperadas as seguintes alterações "
msgid "There are no active leases."
msgstr "Não há concessões ativas."
-msgid "There are no pending changes to apply!"
-msgstr "Não há alterações pendentes para aplicar!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Não há alterações pendentes para reverter!"
msgid "Waiting for command to complete..."
msgstr "A aguardar que o comando termine..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "« Voltar"
+#~ msgid "Apply"
+#~ msgstr "Aplicar"
+
+#~ msgid "Applying changes"
+#~ msgstr "A aplicar as alterações"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Configuração aplicada."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Salvar & Aplicar"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "As seguintes alterações foram escritas"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "Não há alterações pendentes para aplicar!"
+
#~ msgid "Action"
#~ msgstr "Acção"
msgid "Any zone"
msgstr "Orice Zona"
-msgid "Apply"
-msgstr "Aplica"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Se aplica modificarile"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Modificari aplicate."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Schimba parola administratorului pentru accesarea dispozitivului"
msgid "Channel"
msgstr "Canal"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Verificare"
msgid "Configuration"
msgstr "Configurare"
-msgid "Configuration applied."
-msgstr "Configurarea aplicata."
-
msgid "Configuration files will be kept."
msgstr "Fisierele de configurare vor fi pastrate."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Confirmare"
msgid "Connections"
msgstr "Conexiuni"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Tara"
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnosticuri"
msgid "Discard upstream RFC1918 responses"
msgstr ""
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr ""
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Fisier"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "Revert"
msgstr ""
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr ""
msgid "Save & Apply"
msgstr "Salveaza si aplica"
-msgid "Save & Apply"
-msgstr "Salveaza & Aplica"
-
msgid "Scan"
msgstr "Scan"
msgid "Start priority"
msgstr ""
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Pornire"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"\"Proceed\" below to start the flash procedure."
msgstr ""
-msgid "The following changes have been committed"
-msgstr ""
-
msgid "The following changes have been reverted"
msgstr ""
msgid "There are no active leases."
msgstr ""
-msgid "There are no pending changes to apply!"
-msgstr "Nu exista modificari in asteptare de aplicat !"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Nu exista modificari in asteptare de anulat !"
msgid "Waiting for command to complete..."
msgstr ""
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "« Inapoi"
+#~ msgid "Apply"
+#~ msgstr "Aplica"
+
+#~ msgid "Applying changes"
+#~ msgstr "Se aplica modificarile"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Configurarea aplicata."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Salveaza & Aplica"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "Nu exista modificari in asteptare de aplicat !"
+
#~ msgid "Action"
#~ msgstr "Actiune"
msgid "Any zone"
msgstr "Любая зона"
-msgid "Apply"
-msgstr "Принять"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Применение изменений"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Изменения приняты."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Изменить пароль администратора для доступа к устройству."
msgid "Channel"
msgstr "Канал"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Проверить"
msgid "Configuration"
msgstr "Настройка config файла"
-msgid "Configuration applied."
-msgstr "Изменение настроек config файлов."
-
msgid "Configuration files will be kept."
msgstr "Config файлы будут сохранены."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Подтверждение пароля"
msgid "Connections"
msgstr "Соединения"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Страна"
msgid "Device unreachable"
msgstr "Устройство недоступно"
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Диагностика"
msgid "Discard upstream RFC1918 responses"
msgstr "Отбрасывать ответы внешней сети RFC1918."
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Показываются только пакеты, содержащие"
msgid "FT protocol"
msgstr "FT протокол"
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Файл"
msgid "Obfuscated Password"
msgstr "Obfuscated Password"
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "Задержка выключенного состояния"
msgid "Revert"
msgstr "Вернуть"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Корень"
msgid "Save & Apply"
msgstr "Сохранить и применить"
-msgid "Save & Apply"
-msgstr "Сохранить и применить"
-
msgid "Scan"
msgstr "Поиск"
msgid "Start priority"
msgstr "Приоритет"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Загрузка"
msgid "The configuration file could not be loaded due to the following error:"
msgstr "Не удалось загрузить config файл из-за следующей ошибки:"
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"удостовериться в целостности данных.<br /> Нажмите 'Продолжить', чтобы "
"начать процедуру обновления прошивки."
-msgid "The following changes have been committed"
-msgstr "Ваши настройки были применены."
-
msgid "The following changes have been reverted"
msgstr "Ваши настройки были отвергнуты."
msgid "There are no active leases."
msgstr "Нет активных арендованных адресов."
-msgid "There are no pending changes to apply!"
-msgstr "Нет изменений, которые можно применить!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Нет изменений, которые можно отменить!"
msgid "Waiting for command to complete..."
msgstr "Ожидание завершения выполнения команды..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr "Ожидание подключения устройства..."
msgid "« Back"
msgstr "« Назад"
+
+#~ msgid "Apply"
+#~ msgstr "Принять"
+
+#~ msgid "Applying changes"
+#~ msgstr "Применение изменений"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Изменение настроек config файлов."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Сохранить и применить"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "Ваши настройки были применены."
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "Нет изменений, которые можно применить!"
msgid "Any zone"
msgstr ""
-msgid "Apply"
+msgid "Apply request failed with status <code>%h</code>"
msgstr ""
-msgid "Applying changes"
+msgid "Apply unchecked"
msgstr ""
msgid ""
msgid "Changes applied."
msgstr ""
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr ""
msgid "Channel"
msgstr ""
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr ""
msgid "Configuration"
msgstr ""
-msgid "Configuration applied."
+msgid "Configuration files will be kept."
msgstr ""
-msgid "Configuration files will be kept."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
msgstr ""
msgid "Confirmation"
msgid "Connections"
msgstr ""
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr ""
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr ""
msgid "Discard upstream RFC1918 responses"
msgstr ""
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr ""
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr ""
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "Revert"
msgstr ""
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr ""
msgid "Save & Apply"
msgstr ""
-msgid "Save & Apply"
-msgstr ""
-
msgid "Scan"
msgstr ""
msgid "Start priority"
msgstr ""
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr ""
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"\"Proceed\" below to start the flash procedure."
msgstr ""
-msgid "The following changes have been committed"
-msgstr ""
-
msgid "The following changes have been reverted"
msgstr ""
msgid "There are no active leases."
msgstr ""
-msgid "There are no pending changes to apply!"
+msgid "There are no changes to apply."
msgstr ""
msgid "There are no pending changes to revert!"
msgid "Waiting for command to complete..."
msgstr ""
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "Any zone"
msgstr "Någon zon"
-msgid "Apply"
-msgstr "Verkställ"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Verkställer ändringar"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Tillämpade ändringar"
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Ändrar administratörens lösenord för att få tillgång till enheten"
msgid "Channel"
msgstr "Kanal"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Kontrollera"
msgid "Configuration"
msgstr "Konfiguration"
-msgid "Configuration applied."
-msgstr "Konfigurationen tillämpades"
-
msgid "Configuration files will be kept."
msgstr "Konfigurationsfiler kommer att behållas."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Bekräftelse"
msgid "Connections"
msgstr "Anslutningar"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Land"
msgid "Device unreachable"
msgstr "Enheten kan inte nås"
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr ""
msgid "Discard upstream RFC1918 responses"
msgstr ""
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr ""
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Fil"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "Revert"
msgstr "Återgå"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Root"
msgid "Save & Apply"
msgstr "Spara och Verkställ"
-msgid "Save & Apply"
-msgstr "Spara & Verkställ"
-
msgid "Scan"
msgstr "Skanna"
msgid "Start priority"
msgstr ""
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr ""
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"\"Proceed\" below to start the flash procedure."
msgstr ""
-msgid "The following changes have been committed"
-msgstr "Följande ändringar har skickats in"
-
msgid "The following changes have been reverted"
msgstr ""
msgid "There are no active leases."
msgstr "Det finns inga aktiva kontrakt."
-msgid "There are no pending changes to apply!"
-msgstr "Det finns inga pendlande ändringar att verkställa!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Det finns inga pendlande ändringar att återkalla"
msgid "Waiting for command to complete..."
msgstr "Väntar på att kommandot ska avsluta..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr "Väntar på enheten..."
msgid "« Back"
msgstr "« Bakåt"
+#~ msgid "Apply"
+#~ msgstr "Verkställ"
+
+#~ msgid "Applying changes"
+#~ msgstr "Verkställer ändringar"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Konfigurationen tillämpades"
+
+#~ msgid "Save & Apply"
+#~ msgstr "Spara & Verkställ"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "Följande ändringar har skickats in"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "Det finns inga pendlande ändringar att verkställa!"
+
#~ msgid "Action"
#~ msgstr "Åtgärd"
msgid "Any zone"
msgstr ""
-msgid "Apply"
+msgid "Apply request failed with status <code>%h</code>"
msgstr ""
-msgid "Applying changes"
+msgid "Apply unchecked"
msgstr ""
msgid ""
msgid "Changes applied."
msgstr ""
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr ""
msgid "Channel"
msgstr ""
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr ""
msgid "Configuration"
msgstr ""
-msgid "Configuration applied."
+msgid "Configuration files will be kept."
msgstr ""
-msgid "Configuration files will be kept."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
msgstr ""
msgid "Confirmation"
msgid "Connections"
msgstr ""
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr ""
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr ""
msgid "Discard upstream RFC1918 responses"
msgstr ""
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr ""
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr ""
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "Revert"
msgstr ""
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr ""
msgid "Save & Apply"
msgstr ""
-msgid "Save & Apply"
-msgstr ""
-
msgid "Scan"
msgstr ""
msgid "Start priority"
msgstr ""
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr ""
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"\"Proceed\" below to start the flash procedure."
msgstr ""
-msgid "The following changes have been committed"
-msgstr ""
-
msgid "The following changes have been reverted"
msgstr ""
msgid "There are no active leases."
msgstr ""
-msgid "There are no pending changes to apply!"
+msgid "There are no changes to apply."
msgstr ""
msgid "There are no pending changes to revert!"
msgid "Waiting for command to complete..."
msgstr ""
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "Any zone"
msgstr ""
-msgid "Apply"
-msgstr "Uygula"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Değişiklikleri uygula"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr ""
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr ""
msgid "Channel"
msgstr ""
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr ""
msgid "Configuration"
msgstr ""
-msgid "Configuration applied."
+msgid "Configuration files will be kept."
msgstr ""
-msgid "Configuration files will be kept."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
msgstr ""
msgid "Confirmation"
msgid "Connections"
msgstr ""
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr ""
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr ""
msgid "Discard upstream RFC1918 responses"
msgstr ""
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr ""
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr ""
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "Revert"
msgstr ""
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr ""
msgid "Save & Apply"
msgstr ""
-msgid "Save & Apply"
-msgstr ""
-
msgid "Scan"
msgstr ""
msgid "Start priority"
msgstr ""
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr ""
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"\"Proceed\" below to start the flash procedure."
msgstr ""
-msgid "The following changes have been committed"
-msgstr ""
-
msgid "The following changes have been reverted"
msgstr ""
msgid "There are no active leases."
msgstr ""
-msgid "There are no pending changes to apply!"
+msgid "There are no changes to apply."
msgstr ""
msgid "There are no pending changes to revert!"
msgid "Waiting for command to complete..."
msgstr ""
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "« Geri"
+#~ msgid "Apply"
+#~ msgstr "Uygula"
+
+#~ msgid "Applying changes"
+#~ msgstr "Değişiklikleri uygula"
+
#~ msgid "Action"
#~ msgstr "Eylem"
msgid "Any zone"
msgstr "Будь-яка зона"
-msgid "Apply"
-msgstr "Застосувати"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Застосування змін"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Зміни застосовано."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Зміна пароля адміністратора для доступу до пристрою"
msgid "Channel"
msgstr "Канал"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Перевірити"
msgid "Configuration"
msgstr "Конфігурація"
-msgid "Configuration applied."
-msgstr "Конфігурація застосована."
-
msgid "Configuration files will be kept."
msgstr "Конфігураційні файли будуть збережені."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Підтвердження"
msgid "Connections"
msgstr "Підключення"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "Країна"
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Діагностика"
msgid "Discard upstream RFC1918 responses"
msgstr "Відкидати RFC1918-відповіді від клієнта на сервер"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Показані тільки непорожні пакети"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Файл"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "Затримка Off-State"
msgid "Revert"
msgstr "Скасувати зміни"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Корінь"
msgid "Save & Apply"
msgstr "Зберегти і застосувати"
-msgid "Save & Apply"
-msgstr "Зберегти і застосувати"
-
msgid "Scan"
msgstr "Сканувати"
msgid "Start priority"
msgstr "Стартовий пріоритет"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Запуск"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"їх з вихідним файлом для забезпечення цілісності даних.<br /> Натисніть "
"\"Продовжити\", щоб розпочати процедуру оновлення прошивки."
-msgid "The following changes have been committed"
-msgstr "Нижче наведені зміни були застосовані"
-
msgid "The following changes have been reverted"
msgstr "Нижче наведені зміни були скасовані"
msgid "There are no active leases."
msgstr "Активних оренд немає."
-msgid "There are no pending changes to apply!"
-msgstr "Немає жодних змін до застосування!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "Немає жодних змін до скасування!"
msgid "Waiting for command to complete..."
msgstr "Очікуємо завершення виконання команди..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "« Назад"
+#~ msgid "Apply"
+#~ msgstr "Застосувати"
+
+#~ msgid "Applying changes"
+#~ msgstr "Застосування змін"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Конфігурація застосована."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Зберегти і застосувати"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "Нижче наведені зміни були застосовані"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "Немає жодних змін до застосування!"
+
#~ msgid "Action"
#~ msgstr "Дія"
msgid "Any zone"
msgstr ""
-msgid "Apply"
-msgstr "Áp dụng"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Tiến hành thay đổi"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "Thay đổi đã áp dụng"
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr ""
msgid "Channel"
msgstr "Kênh"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr ""
msgid "Configuration"
msgstr "Cấu hình"
-msgid "Configuration applied."
+msgid "Configuration files will be kept."
msgstr ""
-msgid "Configuration files will be kept."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
msgstr ""
msgid "Confirmation"
msgid "Connections"
msgstr ""
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr ""
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr ""
msgid "Discard upstream RFC1918 responses"
msgstr ""
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr ""
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr ""
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr ""
msgid "Revert"
msgstr "Revert"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr ""
msgid "Save & Apply"
msgstr "Lưu & áp dụng "
-msgid "Save & Apply"
-msgstr ""
-
msgid "Scan"
msgstr "Scan"
msgid "Start priority"
msgstr "Bắt đầu ưu tiên"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr ""
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"\"Proceed\" below to start the flash procedure."
msgstr ""
-msgid "The following changes have been committed"
-msgstr ""
-
msgid "The following changes have been reverted"
msgstr "Những thay đối sau đây đã được để trở về tình trạng cũ. "
msgid "There are no active leases."
msgstr ""
-msgid "There are no pending changes to apply!"
+msgid "There are no changes to apply."
msgstr ""
msgid "There are no pending changes to revert!"
msgid "Waiting for command to complete..."
msgstr ""
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr ""
+#~ msgid "Apply"
+#~ msgstr "Áp dụng"
+
+#~ msgid "Applying changes"
+#~ msgstr "Tiến hành thay đổi"
+
#~ msgid "Action"
#~ msgstr "Action"
msgid "Any zone"
msgstr "任意区域"
-msgid "Apply"
-msgstr "应用"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "正在应用更改"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "更改已应用"
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "修改访问设备的管理员密码"
msgid "Channel"
msgstr "信道"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "检查"
msgid "Configuration"
msgstr "配置"
-msgid "Configuration applied."
-msgstr "配置已应用。"
-
msgid "Configuration files will be kept."
msgstr "配置文件将被保留。"
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "确认密码"
msgid "Connections"
msgstr "连接"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "国家"
msgid "Device unreachable"
msgstr "无法连接到设备"
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "网络诊断"
msgid "Discard upstream RFC1918 responses"
msgstr "丢弃 RFC1918 上行响应数据"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "只显示有内容的软件包"
msgid "FT protocol"
msgstr "FT 协议"
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "文件"
msgid "Obfuscated Password"
msgstr "混淆密码"
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "关闭时间"
msgid "Revert"
msgstr "放弃"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Root"
msgid "Save & Apply"
msgstr "保存&应用"
-msgid "Save & Apply"
-msgstr "保存&应用"
-
msgid "Scan"
msgstr "扫描"
msgid "Start priority"
msgstr "启动优先级"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "启动项"
msgid "The configuration file could not be loaded due to the following error:"
msgstr "由于以下错误,配置文件无法被加载:"
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"固件已上传,请注意核对文件大小和校验值!<br />点击下面的“继续”开始刷写,刷新"
"过程中切勿断电!"
-msgid "The following changes have been committed"
-msgstr "以下更改已提交"
-
msgid "The following changes have been reverted"
msgstr "以下更改已放弃"
msgid "There are no active leases."
msgstr "没有已分配的租约。"
-msgid "There are no pending changes to apply!"
-msgstr "没有待生效的更改!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "没有可放弃的更改!"
msgid "Waiting for command to complete..."
msgstr "等待命令执行完成..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr "等待设备..."
msgid "« Back"
msgstr "« 后退"
+#~ msgid "Apply"
+#~ msgstr "应用"
+
+#~ msgid "Applying changes"
+#~ msgstr "正在应用更改"
+
+#~ msgid "Configuration applied."
+#~ msgstr "配置已应用。"
+
+#~ msgid "Save & Apply"
+#~ msgstr "保存&应用"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "以下更改已提交"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "没有待生效的更改!"
+
#~ msgid "Action"
#~ msgstr "动作"
msgid "Any zone"
msgstr "任意區域"
-msgid "Apply"
-msgstr "套用"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "正在套用變更"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "修改已套用"
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "修改管理員密碼"
msgid "Channel"
msgstr "頻道"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "檢查"
msgid "Configuration"
msgstr "設定"
-msgid "Configuration applied."
-msgstr "啟用設定"
-
msgid "Configuration files will be kept."
msgstr "設定檔將被存檔"
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "再確認"
msgid "Connections"
msgstr "連線數"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "國別"
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "診斷"
msgid "Discard upstream RFC1918 responses"
msgstr "丟棄上游RFC1918 虛擬IP網路的回應"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "僅顯示內含的軟體"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "檔案"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "關閉狀態延遲"
msgid "Revert"
msgstr "回溯"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "根"
msgid "Save & Apply"
msgstr "保存並啟用"
-msgid "Save & Apply"
-msgstr "保存 & 啟用"
-
msgid "Scan"
msgstr "掃描"
msgid "Start priority"
msgstr "啟用優先權順序"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "啟動"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
"要刷的映像檔已上傳.下面是這個校驗碼和檔案大小詳列, 用原始檔比對它門以確保資料"
"完整性.<br />按下面的\"繼續\"便可以開啟更新流程."
-msgid "The following changes have been committed"
-msgstr "接下來的修改已經被承諾"
-
msgid "The following changes have been reverted"
msgstr "接下來的修改已經被回復"
msgid "There are no active leases."
msgstr "租賃尚未啟動."
-msgid "There are no pending changes to apply!"
-msgstr "尚無聽候的修改被採用"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "尚無聽候的修改被復元!"
msgid "Waiting for command to complete..."
msgstr "等待完整性指令..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "« Back"
msgstr "« 倒退"
+#~ msgid "Apply"
+#~ msgstr "套用"
+
+#~ msgid "Applying changes"
+#~ msgstr "正在套用變更"
+
+#~ msgid "Configuration applied."
+#~ msgstr "啟用設定"
+
+#~ msgid "Save & Apply"
+#~ msgstr "保存 & 啟用"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "接下來的修改已經被承諾"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "尚無聽候的修改被採用"
+
#~ msgid "Action"
#~ msgstr "動作"