This patch is required not to lost error records by action invoked on
error recovery, such as slot reset etc.
Following sample (real machine + dummy record injected by aer-inject)
shows that record of 28:00.1 could not be retrieved by recovery of 28:00.0:
- Before:
pcieport-driver 0000:00:02.0: AER: Multiple Uncorrected (Non-Fatal) error received: id=2801
e1000e 0000:28:00.0: PCIE Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=2800(Receiver ID)
e1000e 0000:28:00.0: device [8086:1096] error status/mask=
00001000/
00100000
e1000e 0000:28:00.0: [12] Poisoned TLP (First)
e1000e 0000:28:00.0: TLP Header:
00000000 00000001 00000002 00000003
e1000e 0000:28:00.0: broadcast error_detected message
e1000e 0000:28:00.0: broadcast slot_reset message
e1000e 0000:28:00.0: setting latency timer to 64
e1000e 0000:28:00.0: restoring config space at offset 0x1 (was 0x100547, writing 0x100147)
e1000e 0000:28:00.0: PME# disabled
e1000e 0000:28:00.0: PME# disabled
e1000e 0000:28:00.1: setting latency timer to 64
e1000e 0000:28:00.1: restoring config space at offset 0x1 (was 0x100547, writing 0x100147)
e1000e 0000:28:00.1: PME# disabled
e1000e 0000:28:00.1: PME# disabled
e1000e 0000:28:00.0: broadcast resume message
e1000e 0000:28:00.0: AER driver successfully recovered
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
- After:
pcieport-driver 0000:00:02.0: AER: Multiple Uncorrected (Non-Fatal) error received: id=2801
e1000e 0000:28:00.0: PCIE Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=2800(Receiver ID)
e1000e 0000:28:00.0: device [8086:1096] error status/mask=
00001000/
00100000
e1000e 0000:28:00.0: [12] Poisoned TLP (First)
e1000e 0000:28:00.0: TLP Header:
00000000 00000001 00000002 00000003
e1000e 0000:28:00.1: PCIE Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=2801(Receiver ID)
e1000e 0000:28:00.1: device [8086:1096] error status/mask=
00081000/
00100000
e1000e 0000:28:00.1: [12] Poisoned TLP (First)
e1000e 0000:28:00.1: [19] ECRC
e1000e 0000:28:00.1: TLP Header:
00000000 00000001 00000002 00000003
e1000e 0000:28:00.1: Error of this Agent(2801) is reported first
e1000e 0000:28:00.0: broadcast error_detected message
e1000e 0000:28:00.0: broadcast slot_reset message
e1000e 0000:28:00.0: setting latency timer to 64
e1000e 0000:28:00.0: restoring config space at offset 0x1 (was 0x100547, writing 0x100147)
e1000e 0000:28:00.0: PME# disabled
e1000e 0000:28:00.0: PME# disabled
e1000e 0000:28:00.1: setting latency timer to 64
e1000e 0000:28:00.1: restoring config space at offset 0x1 (was 0x100547, writing 0x100147)
e1000e 0000:28:00.1: PME# disabled
e1000e 0000:28:00.1: PME# disabled
e1000e 0000:28:00.0: broadcast resume message
e1000e 0000:28:00.0: AER driver successfully recovered
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
#define ERR_COR_ID(d) (d & 0xffff)
#define ERR_UNCOR_ID(d) (d >> 16)
-#define AER_SUCCESS 0
-#define AER_UNSUCCESS 1
#define AER_ERROR_SOURCES_MAX 100
#define AER_LOG_TLP_MASKS (PCI_ERR_UNC_POISON_TLP| \
return e_source;
}
+/**
+ * get_device_error_info - read error status from dev and store it to info
+ * @dev: pointer to the device expected to have a error record
+ * @info: pointer to structure to store the error record
+ *
+ * Return 1 on success, 0 on error.
+ */
static int get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
{
int pos, temp;
/* The device might not support AER */
if (!pos)
- return AER_SUCCESS;
+ return 1;
if (info->severity == AER_CORRECTABLE) {
pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS,
pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK,
&info->mask);
if (!(info->status & ~info->mask))
- return AER_UNSUCCESS;
+ return 0;
} else if (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE ||
info->severity == AER_NONFATAL) {
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK,
&info->mask);
if (!(info->status & ~info->mask))
- return AER_UNSUCCESS;
+ return 0;
/* Get First Error Pointer */
pci_read_config_dword(dev, pos + PCI_ERR_CAP, &temp);
}
}
- return AER_SUCCESS;
+ return 1;
}
static inline void aer_process_err_devices(struct pcie_device *p_device,
e_info->id);
}
+ /* Report all before handle them, not to lost records by reset etc. */
for (i = 0; i < e_info->error_dev_num && e_info->dev[i]; i++) {
- if (get_device_error_info(e_info->dev[i], e_info) ==
- AER_SUCCESS) {
+ if (get_device_error_info(e_info->dev[i], e_info))
aer_print_error(e_info->dev[i], e_info);
- handle_error_source(p_device,
- e_info->dev[i],
- e_info);
- }
+ }
+ for (i = 0; i < e_info->error_dev_num && e_info->dev[i]; i++) {
+ if (get_device_error_info(e_info->dev[i], e_info))
+ handle_error_source(p_device, e_info->dev[i], e_info);
}
}
if (aer_osc_setup(dev) && !forceload)
return -ENXIO;
- return AER_SUCCESS;
+ return 0;
}