pata_hpt3x2n: coding style cleanup

Fix 8 errors and 3 warnings given by checkpatch.pl:

- *switch* and *case* not on the same indentation level;

- no space between *for*/*switch*/*while* and open parenthesis;

- space between an unary operator and its operand;

- spaces before tabs;

- lines over 80 characters.

In addition to these changes, also do the following:

- add new line after variable definitions;

- fix the style of some multi-line comments.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 809a4b4e88ab9e5c45cd0989c2b9b7221c4a3b93..d2239bbdb798faba32b70f2a122ee1222052d8e8 100644 (file)
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "pata_hpt3x2n"
-#define DRV_VERSION    "0.3.12"
+#define DRV_VERSION    "0.3.13"
 
 enum {
        HPT_PCI_FAST    =       (1 << 31),
@@ -103,7 +103,7 @@ static u32 hpt3x2n_find_mode(struct ata_port *ap, int speed)
 {
        struct hpt_clock *clocks = hpt3x2n_clocks;
 
-       while(clocks->xfer_speed) {
+       while (clocks->xfer_speed) {
                if (clocks->xfer_speed == speed)
                        return clocks->timing;
                clocks++;
@@ -169,6 +169,7 @@ static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline)
 {
        struct ata_port *ap = link->ap;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
        /* Reset the state machine */
        pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
        udelay(100);
@@ -384,12 +385,12 @@ static int hpt3xn_calibrate_dpll(struct pci_dev *dev)
        u32 reg5c;
        int tries;
 
-       for(tries = 0; tries < 0x5000; tries++) {
+       for (tries = 0; tries < 0x5000; tries++) {
                udelay(50);
                pci_read_config_byte(dev, 0x5b, &reg5b);
                if (reg5b & 0x80) {
                        /* See if it stays set */
-                       for(tries = 0; tries < 0x1000; tries ++) {
+                       for (tries = 0; tries < 0x1000; tries++) {
                                pci_read_config_byte(dev, 0x5b, &reg5b);
                                /* Failed ? */
                                if ((reg5b & 0x80) == 0)
@@ -397,7 +398,7 @@ static int hpt3xn_calibrate_dpll(struct pci_dev *dev)
                        }
                        /* Turn off tuning, we have the DPLL set */
                        pci_read_config_dword(dev, 0x5c, &reg5c);
-                       pci_write_config_dword(dev, 0x5c, reg5c & ~ 0x100);
+                       pci_write_config_dword(dev, 0x5c, reg5c & ~0x100);
                        return 1;
                }
        }
@@ -501,34 +502,36 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
        if (rc)
                return rc;
 
-       switch(dev->device) {
-               case PCI_DEVICE_ID_TTI_HPT366:
-                       /* 372N if rev >= 6 */
-                       if (rev < 6)
-                               return -ENODEV;
-                       goto hpt372n;
-               case PCI_DEVICE_ID_TTI_HPT371:
-                       /* 371N if rev >= 2 */
-                       if (rev < 2)
-                               return -ENODEV;
-                       break;
-               case PCI_DEVICE_ID_TTI_HPT372:
-                       /* 372N if rev >= 2 */
-                       if (rev < 2)
-                               return -ENODEV;
-                       goto hpt372n;
-               case PCI_DEVICE_ID_TTI_HPT302:
-                       /* 302N if rev >= 2 */
-                       if (rev < 2)
-                               return -ENODEV;
-                       break;
-               case PCI_DEVICE_ID_TTI_HPT372N:
-hpt372n:
-                       ppi[0] = &info_hpt372n;
-                       break;
-               default:
-                       printk(KERN_ERR "pata_hpt3x2n: PCI table is bogus please report (%d).\n", dev->device);
+       switch (dev->device) {
+       case PCI_DEVICE_ID_TTI_HPT366:
+               /* 372N if rev >= 6 */
+               if (rev < 6)
+                       return -ENODEV;
+               goto hpt372n;
+       case PCI_DEVICE_ID_TTI_HPT371:
+               /* 371N if rev >= 2 */
+               if (rev < 2)
+                       return -ENODEV;
+               break;
+       case PCI_DEVICE_ID_TTI_HPT372:
+               /* 372N if rev >= 2 */
+               if (rev < 2)
+                       return -ENODEV;
+               goto hpt372n;
+       case PCI_DEVICE_ID_TTI_HPT302:
+               /* 302N if rev >= 2 */
+               if (rev < 2)
                        return -ENODEV;
+               break;
+       case PCI_DEVICE_ID_TTI_HPT372N:
+hpt372n:
+               ppi[0] = &info_hpt372n;
+               break;
+       default:
+               printk(KERN_ERR
+                      "pata_hpt3x2n: PCI table is bogus please report (%d).\n",
+                      dev->device);
+               return -ENODEV;
        }
 
        /* Ok so this is a chip we support */
@@ -555,8 +558,10 @@ hpt372n:
                pci_write_config_byte(dev, 0x50, mcr1);
        }
 
-       /* Tune the PLL. HPT recommend using 75 for SATA, 66 for UDMA133 or
-          50 for UDMA100. Right now we always use 66 */
+       /*
+        * Tune the PLL. HPT recommend using 75 for SATA, 66 for UDMA133 or
+        * 50 for UDMA100. Right now we always use 66
+        */
 
        pci_mhz = hpt3x2n_pci_clock(dev);
 
@@ -568,7 +573,7 @@ hpt372n:
        pci_write_config_byte(dev, 0x5B, 0x21);
 
        /* Unlike the 37x we don't try jiggling the frequency */
-       for(adjust = 0; adjust < 8; adjust++) {
+       for (adjust = 0; adjust < 8; adjust++) {
                if (hpt3xn_calibrate_dpll(dev))
                        break;
                pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
@@ -580,8 +585,11 @@ hpt372n:
 
        printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n",
               pci_mhz);
-       /* Set our private data up. We only need a few flags so we use
-          it directly */
+
+       /*
+        * Set our private data up. We only need a few flags
+        * so we use it directly.
+        */
        if (pci_mhz > 60)
                hpriv = (void *)(PCI66 | USE_DPLL);
 
@@ -608,9 +616,9 @@ static const struct pci_device_id hpt3x2n[] = {
 };
 
 static struct pci_driver hpt3x2n_pci_driver = {
-       .name           = DRV_NAME,
+       .name           = DRV_NAME,
        .id_table       = hpt3x2n,
-       .probe          = hpt3x2n_init_one,
+       .probe          = hpt3x2n_init_one,
        .remove         = ata_pci_remove_one
 };