Also sort them to start from 001.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
--- /dev/null
+From 28a1a6474c5053bae01bd29946b4d5ede539176b Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Mon, 31 Oct 2022 11:13:52 +0000
+Subject: [PATCH] dt-bindings: usb: Add H616 compatible string
+
+The Allwinner H616 contains four fully OHCI/EHCI compatible USB host
+controllers, so just add their compatible strings to the list of
+generic OHCI/EHCI controllers.
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Link: https://lore.kernel.org/r/20221031111358.3387297-2-andre.przywara@arm.com
+Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+---
+ Documentation/devicetree/bindings/usb/generic-ehci.yaml | 1 +
+ Documentation/devicetree/bindings/usb/generic-ohci.yaml | 1 +
+ 2 files changed, 2 insertions(+)
+
+--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
++++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+@@ -30,6 +30,7 @@ properties:
+ - allwinner,sun4i-a10-ehci
+ - allwinner,sun50i-a64-ehci
+ - allwinner,sun50i-h6-ehci
++ - allwinner,sun50i-h616-ehci
+ - allwinner,sun5i-a13-ehci
+ - allwinner,sun6i-a31-ehci
+ - allwinner,sun7i-a20-ehci
+--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
++++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+@@ -20,6 +20,7 @@ properties:
+ - allwinner,sun4i-a10-ohci
+ - allwinner,sun50i-a64-ohci
+ - allwinner,sun50i-h6-ohci
++ - allwinner,sun50i-h616-ohci
+ - allwinner,sun5i-a13-ohci
+ - allwinner,sun6i-a31-ohci
+ - allwinner,sun7i-a20-ohci
--- /dev/null
+From 6964affe65066651eca21e97247d3b7cac5153dc Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Mon, 31 Oct 2022 11:13:53 +0000
+Subject: [PATCH] dt-bindings: phy: Add special clock for Allwinner H616 PHY
+
+The USB PHY IP in the Allwinner H616 SoC requires a quirk that involves
+some resources from port 2's PHY and HCI IP. In particular the PMU clock
+for port 2 must be surely ungated before accessing the REG_HCI_PHY_CTL
+register of port 2. To allow each USB port to be controlled
+independently of port 2, we need a handle to that particular PMU clock
+in the *PHY* node, as the HCI and PHY part might be handled by separate
+drivers.
+
+Add that clock to the requirements of the H616 PHY binding, so that a
+PHY driver can apply the quirk in isolation, without requiring help from
+port 2's HCI driver.
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Reviewed-by: Rob Herring <robh@kernel.org>
+Link: https://lore.kernel.org/r/20221031111358.3387297-3-andre.przywara@arm.com
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+---
+ .../phy/allwinner,sun8i-h3-usb-phy.yaml | 26 +++++++++++++++++++
+ 1 file changed, 26 insertions(+)
+
+--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
++++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
+@@ -36,18 +36,22 @@ properties:
+ - const: pmu3
+
+ clocks:
++ minItems: 4
+ items:
+ - description: USB OTG PHY bus clock
+ - description: USB Host 0 PHY bus clock
+ - description: USB Host 1 PHY bus clock
+ - description: USB Host 2 PHY bus clock
++ - description: PMU clock for host port 2
+
+ clock-names:
++ minItems: 4
+ items:
+ - const: usb0_phy
+ - const: usb1_phy
+ - const: usb2_phy
+ - const: usb3_phy
++ - const: pmu2_clk
+
+ resets:
+ items:
+@@ -96,6 +100,28 @@ required:
+ - resets
+ - reset-names
+
++allOf:
++ - if:
++ properties:
++ compatible:
++ contains:
++ enum:
++ - allwinner,sun50i-h616-usb-phy
++ then:
++ properties:
++ clocks:
++ minItems: 5
++
++ clock-names:
++ minItems: 5
++ else:
++ properties:
++ clocks:
++ maxItems: 4
++
++ clock-names:
++ maxItems: 4
++
+ additionalProperties: false
+
+ examples:
--- /dev/null
+From f40cf244c3feb4e1a442f8029b691add2c65b3ab Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Mon, 31 Oct 2022 11:13:56 +0000
+Subject: [PATCH] arm64: dts: allwinner: h616: Add USB nodes
+
+Add the nodes for the MUSB and the four USB host controllers to the SoC
+.dtsi, along with the PHY node needed to bind all of them together.
+
+EHCI/OHCI and MUSB are compatible to previous SoCs, but the PHY requires
+some quirks (handled in the driver).
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+Link: https://lore.kernel.org/r/20221031111358.3387297-6-andre.przywara@arm.com
+Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+---
+ .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 160 ++++++++++++++++++
+ 1 file changed, 160 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -504,6 +504,166 @@
+ };
+ };
+
++ usbotg: usb@5100000 {
++ compatible = "allwinner,sun50i-h616-musb",
++ "allwinner,sun8i-h3-musb";
++ reg = <0x05100000 0x0400>;
++ clocks = <&ccu CLK_BUS_OTG>;
++ resets = <&ccu RST_BUS_OTG>;
++ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "mc";
++ phys = <&usbphy 0>;
++ phy-names = "usb";
++ extcon = <&usbphy 0>;
++ status = "disabled";
++ };
++
++ usbphy: phy@5100400 {
++ compatible = "allwinner,sun50i-h616-usb-phy";
++ reg = <0x05100400 0x24>,
++ <0x05101800 0x14>,
++ <0x05200800 0x14>,
++ <0x05310800 0x14>,
++ <0x05311800 0x14>;
++ reg-names = "phy_ctrl",
++ "pmu0",
++ "pmu1",
++ "pmu2",
++ "pmu3";
++ clocks = <&ccu CLK_USB_PHY0>,
++ <&ccu CLK_USB_PHY1>,
++ <&ccu CLK_USB_PHY2>,
++ <&ccu CLK_USB_PHY3>,
++ <&ccu CLK_BUS_EHCI2>;
++ clock-names = "usb0_phy",
++ "usb1_phy",
++ "usb2_phy",
++ "usb3_phy",
++ "pmu2_clk";
++ resets = <&ccu RST_USB_PHY0>,
++ <&ccu RST_USB_PHY1>,
++ <&ccu RST_USB_PHY2>,
++ <&ccu RST_USB_PHY3>;
++ reset-names = "usb0_reset",
++ "usb1_reset",
++ "usb2_reset",
++ "usb3_reset";
++ status = "disabled";
++ #phy-cells = <1>;
++ };
++
++ ehci0: usb@5101000 {
++ compatible = "allwinner,sun50i-h616-ehci",
++ "generic-ehci";
++ reg = <0x05101000 0x100>;
++ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_OHCI0>,
++ <&ccu CLK_BUS_EHCI0>,
++ <&ccu CLK_USB_OHCI0>;
++ resets = <&ccu RST_BUS_OHCI0>,
++ <&ccu RST_BUS_EHCI0>;
++ phys = <&usbphy 0>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ohci0: usb@5101400 {
++ compatible = "allwinner,sun50i-h616-ohci",
++ "generic-ohci";
++ reg = <0x05101400 0x100>;
++ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_OHCI0>,
++ <&ccu CLK_USB_OHCI0>;
++ resets = <&ccu RST_BUS_OHCI0>;
++ phys = <&usbphy 0>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ehci1: usb@5200000 {
++ compatible = "allwinner,sun50i-h616-ehci",
++ "generic-ehci";
++ reg = <0x05200000 0x100>;
++ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_OHCI1>,
++ <&ccu CLK_BUS_EHCI1>,
++ <&ccu CLK_USB_OHCI1>;
++ resets = <&ccu RST_BUS_OHCI1>,
++ <&ccu RST_BUS_EHCI1>;
++ phys = <&usbphy 1>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ohci1: usb@5200400 {
++ compatible = "allwinner,sun50i-h616-ohci",
++ "generic-ohci";
++ reg = <0x05200400 0x100>;
++ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_OHCI1>,
++ <&ccu CLK_USB_OHCI1>;
++ resets = <&ccu RST_BUS_OHCI1>;
++ phys = <&usbphy 1>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ehci2: usb@5310000 {
++ compatible = "allwinner,sun50i-h616-ehci",
++ "generic-ehci";
++ reg = <0x05310000 0x100>;
++ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_OHCI2>,
++ <&ccu CLK_BUS_EHCI2>,
++ <&ccu CLK_USB_OHCI2>;
++ resets = <&ccu RST_BUS_OHCI2>,
++ <&ccu RST_BUS_EHCI2>;
++ phys = <&usbphy 2>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ohci2: usb@5310400 {
++ compatible = "allwinner,sun50i-h616-ohci",
++ "generic-ohci";
++ reg = <0x05310400 0x100>;
++ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_OHCI2>,
++ <&ccu CLK_USB_OHCI2>;
++ resets = <&ccu RST_BUS_OHCI2>;
++ phys = <&usbphy 2>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ehci3: usb@5311000 {
++ compatible = "allwinner,sun50i-h616-ehci",
++ "generic-ehci";
++ reg = <0x05311000 0x100>;
++ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_OHCI3>,
++ <&ccu CLK_BUS_EHCI3>,
++ <&ccu CLK_USB_OHCI3>;
++ resets = <&ccu RST_BUS_OHCI3>,
++ <&ccu RST_BUS_EHCI3>;
++ phys = <&usbphy 3>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
++ ohci3: usb@5311400 {
++ compatible = "allwinner,sun50i-h616-ohci",
++ "generic-ohci";
++ reg = <0x05311400 0x100>;
++ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_OHCI3>,
++ <&ccu CLK_USB_OHCI3>;
++ resets = <&ccu RST_BUS_OHCI3>;
++ phys = <&usbphy 3>;
++ phy-names = "usb";
++ status = "disabled";
++ };
++
+ rtc: rtc@7000000 {
+ compatible = "allwinner,sun50i-h616-rtc";
+ reg = <0x07000000 0x400>;
--- /dev/null
+From db5f028309ede13767e2ba356c1975ac37a4fd6c Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Mon, 31 Oct 2022 11:13:57 +0000
+Subject: [PATCH] arm64: dts: allwinner: h616: OrangePi Zero 2: Add USB nodes
+
+The OrangePi Zero 2 has one USB-A host port, VBUS is provided by
+a GPIO controlled regulator.
+The USB-C port is meant to power the board, but is also connected to
+the USB 0 port, which we configure as an MUSB peripheral.
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+Link: https://lore.kernel.org/r/20221031111358.3387297-7-andre.przywara@arm.com
+Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+---
+ .../allwinner/sun50i-h616-orangepi-zero2.dts | 41 +++++++++++++++++++
+ 1 file changed, 41 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+@@ -49,8 +49,24 @@
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
++
++ reg_usb1_vbus: regulator-usb1-vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb1-vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <®_vcc5v>;
++ enable-active-high;
++ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
++ };
++};
++
++&ehci1 {
++ status = "okay";
+ };
+
++/* USB 2 & 3 are on headers only. */
++
+ &emac0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ext_rgmii_pins>;
+@@ -76,6 +92,10 @@
+ status = "okay";
+ };
+
++&ohci1 {
++ status = "okay";
++};
++
+ &r_rsb {
+ status = "okay";
+
+@@ -211,3 +231,24 @@
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+ };
++
++&usbotg {
++ /*
++ * PHY0 pins are connected to a USB-C socket, but a role switch
++ * is not implemented: both CC pins are pulled to GND.
++ * The VBUS pins power the device, so a fixed peripheral mode
++ * is the best choice.
++ * The board can be powered via GPIOs, in this case port0 *can*
++ * act as a host (with a cable/adapter ignoring CC), as VBUS is
++ * then provided by the GPIOs. Any user of this setup would
++ * need to adjust the DT accordingly: dr_mode set to "host",
++ * enabling OHCI0 and EHCI0.
++ */
++ dr_mode = "peripheral";
++ status = "okay";
++};
++
++&usbphy {
++ usb1_vbus-supply = <®_usb1_vbus>;
++ status = "okay";
++};
+++ /dev/null
-From e4045c8125d88a9eb8b4f8f74b5c7955d5d9adc0 Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Thu, 17 Jun 2021 10:54:22 +0100
-Subject: [PATCH 5000/5006] dt-bindings: usb: Add H616 compatible string
-
-The Allwinner H616 contains four fully OHCI/EHCI compatible USB host
-controllers, so just add their compatible strings to the list of
-generic OHCI/EHCI controllers.
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
----
- Documentation/devicetree/bindings/usb/generic-ehci.yaml | 1 +
- Documentation/devicetree/bindings/usb/generic-ohci.yaml | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
-+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
-@@ -30,6 +30,7 @@ properties:
- - allwinner,sun4i-a10-ehci
- - allwinner,sun50i-a64-ehci
- - allwinner,sun50i-h6-ehci
-+ - allwinner,sun50i-h616-ehci
- - allwinner,sun5i-a13-ehci
- - allwinner,sun6i-a31-ehci
- - allwinner,sun7i-a20-ehci
---- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
-+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
-@@ -20,6 +20,7 @@ properties:
- - allwinner,sun4i-a10-ohci
- - allwinner,sun50i-a64-ohci
- - allwinner,sun50i-h6-ohci
-+ - allwinner,sun50i-h616-ohci
- - allwinner,sun5i-a13-ohci
- - allwinner,sun6i-a31-ohci
- - allwinner,sun7i-a20-ohci
+++ /dev/null
-From e2078ae0c559b6ac91db19262b56d8cf334354cb Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Mon, 12 Sep 2022 00:03:22 +0100
-Subject: [PATCH 5001/5006] dt-bindings: phy: Add special clock for Allwinner
- H616 PHY
-
-The USB PHY IP in the Allwinner H616 SoC requires a quirk that involves
-some resources from port 2's PHY and HCI IP. In particular the PMU clock
-for port 2 must be surely ungated before accessing the REG_HCI_PHY_CTL
-register of port 2. To allow each USB port to be controlled
-independently of port 2, we need a handle to that particular PMU clock
-in the *PHY* node, as the HCI and PHY part might be handled by separate
-drivers.
-
-Add that clock to the requirements of the H616 PHY binding, so that a
-PHY driver can apply the quirk in isolation, without requiring help from
-port 2's HCI driver.
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
----
- .../phy/allwinner,sun8i-h3-usb-phy.yaml | 26 +++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
-+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
-@@ -36,18 +36,22 @@ properties:
- - const: pmu3
-
- clocks:
-+ minItems: 4
- items:
- - description: USB OTG PHY bus clock
- - description: USB Host 0 PHY bus clock
- - description: USB Host 1 PHY bus clock
- - description: USB Host 2 PHY bus clock
-+ - description: PMU clock for host port 2
-
- clock-names:
-+ minItems: 4
- items:
- - const: usb0_phy
- - const: usb1_phy
- - const: usb2_phy
- - const: usb3_phy
-+ - const: pmu2_clk
-
- resets:
- items:
-@@ -96,6 +100,28 @@ required:
- - resets
- - reset-names
-
-+allOf:
-+ - if:
-+ properties:
-+ compatible:
-+ contains:
-+ enum:
-+ - allwinner,sun50i-h616-usb-phy
-+ then:
-+ properties:
-+ clocks:
-+ minItems: 5
-+
-+ clock-names:
-+ minItems: 5
-+ else:
-+ properties:
-+ clocks:
-+ maxItems: 4
-+
-+ clock-names:
-+ maxItems: 4
-+
- additionalProperties: false
-
- examples:
+++ /dev/null
-From 4cfd9d9350a57fc3ced240dbf61ca2f444283c50 Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Wed, 16 Jun 2021 18:20:47 +0100
-Subject: [PATCH 5004/5006] arm64: dts: allwinner: h616: Add USB nodes
-
-Add the nodes for the MUSB and the four USB host controllers to the SoC
-.dtsi, along with the PHY node needed to bind all of them together.
-
-EHCI/OHCI and MUSB are compatible to previous SoCs, but the PHY requires
-some quirks (handled in the driver).
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
----
- .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 160 ++++++++++++++++++
- 1 file changed, 160 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-@@ -504,6 +504,166 @@
- };
- };
-
-+ usbotg: usb@5100000 {
-+ compatible = "allwinner,sun50i-h616-musb",
-+ "allwinner,sun8i-h3-musb";
-+ reg = <0x05100000 0x0400>;
-+ clocks = <&ccu CLK_BUS_OTG>;
-+ resets = <&ccu RST_BUS_OTG>;
-+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "mc";
-+ phys = <&usbphy 0>;
-+ phy-names = "usb";
-+ extcon = <&usbphy 0>;
-+ status = "disabled";
-+ };
-+
-+ usbphy: phy@5100400 {
-+ compatible = "allwinner,sun50i-h616-usb-phy";
-+ reg = <0x05100400 0x24>,
-+ <0x05101800 0x14>,
-+ <0x05200800 0x14>,
-+ <0x05310800 0x14>,
-+ <0x05311800 0x14>;
-+ reg-names = "phy_ctrl",
-+ "pmu0",
-+ "pmu1",
-+ "pmu2",
-+ "pmu3";
-+ clocks = <&ccu CLK_USB_PHY0>,
-+ <&ccu CLK_USB_PHY1>,
-+ <&ccu CLK_USB_PHY2>,
-+ <&ccu CLK_USB_PHY3>,
-+ <&ccu CLK_BUS_EHCI2>;
-+ clock-names = "usb0_phy",
-+ "usb1_phy",
-+ "usb2_phy",
-+ "usb3_phy",
-+ "pmu2_clk";
-+ resets = <&ccu RST_USB_PHY0>,
-+ <&ccu RST_USB_PHY1>,
-+ <&ccu RST_USB_PHY2>,
-+ <&ccu RST_USB_PHY3>;
-+ reset-names = "usb0_reset",
-+ "usb1_reset",
-+ "usb2_reset",
-+ "usb3_reset";
-+ status = "disabled";
-+ #phy-cells = <1>;
-+ };
-+
-+ ehci0: usb@5101000 {
-+ compatible = "allwinner,sun50i-h616-ehci",
-+ "generic-ehci";
-+ reg = <0x05101000 0x100>;
-+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI0>,
-+ <&ccu CLK_BUS_EHCI0>,
-+ <&ccu CLK_USB_OHCI0>;
-+ resets = <&ccu RST_BUS_OHCI0>,
-+ <&ccu RST_BUS_EHCI0>;
-+ phys = <&usbphy 0>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci0: usb@5101400 {
-+ compatible = "allwinner,sun50i-h616-ohci",
-+ "generic-ohci";
-+ reg = <0x05101400 0x100>;
-+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI0>,
-+ <&ccu CLK_USB_OHCI0>;
-+ resets = <&ccu RST_BUS_OHCI0>;
-+ phys = <&usbphy 0>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ehci1: usb@5200000 {
-+ compatible = "allwinner,sun50i-h616-ehci",
-+ "generic-ehci";
-+ reg = <0x05200000 0x100>;
-+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI1>,
-+ <&ccu CLK_BUS_EHCI1>,
-+ <&ccu CLK_USB_OHCI1>;
-+ resets = <&ccu RST_BUS_OHCI1>,
-+ <&ccu RST_BUS_EHCI1>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci1: usb@5200400 {
-+ compatible = "allwinner,sun50i-h616-ohci",
-+ "generic-ohci";
-+ reg = <0x05200400 0x100>;
-+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI1>,
-+ <&ccu CLK_USB_OHCI1>;
-+ resets = <&ccu RST_BUS_OHCI1>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ehci2: usb@5310000 {
-+ compatible = "allwinner,sun50i-h616-ehci",
-+ "generic-ehci";
-+ reg = <0x05310000 0x100>;
-+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI2>,
-+ <&ccu CLK_BUS_EHCI2>,
-+ <&ccu CLK_USB_OHCI2>;
-+ resets = <&ccu RST_BUS_OHCI2>,
-+ <&ccu RST_BUS_EHCI2>;
-+ phys = <&usbphy 2>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci2: usb@5310400 {
-+ compatible = "allwinner,sun50i-h616-ohci",
-+ "generic-ohci";
-+ reg = <0x05310400 0x100>;
-+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI2>,
-+ <&ccu CLK_USB_OHCI2>;
-+ resets = <&ccu RST_BUS_OHCI2>;
-+ phys = <&usbphy 2>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ehci3: usb@5311000 {
-+ compatible = "allwinner,sun50i-h616-ehci",
-+ "generic-ehci";
-+ reg = <0x05311000 0x100>;
-+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI3>,
-+ <&ccu CLK_BUS_EHCI3>,
-+ <&ccu CLK_USB_OHCI3>;
-+ resets = <&ccu RST_BUS_OHCI3>,
-+ <&ccu RST_BUS_EHCI3>;
-+ phys = <&usbphy 3>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci3: usb@5311400 {
-+ compatible = "allwinner,sun50i-h616-ohci",
-+ "generic-ohci";
-+ reg = <0x05311400 0x100>;
-+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI3>,
-+ <&ccu CLK_USB_OHCI3>;
-+ resets = <&ccu RST_BUS_OHCI3>;
-+ phys = <&usbphy 3>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
- rtc: rtc@7000000 {
- compatible = "allwinner,sun50i-h616-rtc";
- reg = <0x07000000 0x400>;
+++ /dev/null
-From 1bc12a9ae690a22a525f9b71778022bb4533fec1 Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Wed, 16 Jun 2021 18:32:36 +0100
-Subject: [PATCH 5005/5006] arm64: dts: allwinner: h616: OrangePi Zero 2: Add
- USB nodes
-
-The OrangePi Zero 2 has one USB-A host port, VBUS is provided by
-a GPIO controlled regulator.
-The USB-C port is meant to power the board, but is also connected to
-the USB 0 port, which we configure as an MUSB peripheral.
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
----
- .../allwinner/sun50i-h616-orangepi-zero2.dts | 41 +++++++++++++++++++
- 1 file changed, 41 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-@@ -49,8 +49,24 @@
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-+
-+ reg_usb1_vbus: regulator-usb1-vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb1-vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <®_vcc5v>;
-+ enable-active-high;
-+ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
-+ };
-+};
-+
-+&ehci1 {
-+ status = "okay";
- };
-
-+/* USB 2 & 3 are on headers only. */
-+
- &emac0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ext_rgmii_pins>;
-@@ -76,6 +92,10 @@
- status = "okay";
- };
-
-+&ohci1 {
-+ status = "okay";
-+};
-+
- &r_rsb {
- status = "okay";
-
-@@ -211,3 +231,24 @@
- pinctrl-0 = <&uart0_ph_pins>;
- status = "okay";
- };
-+
-+&usbotg {
-+ /*
-+ * PHY0 pins are connected to a USB-C socket, but a role switch
-+ * is not implemented: both CC pins are pulled to GND.
-+ * The VBUS pins power the device, so a fixed peripheral mode
-+ * is the best choice.
-+ * The board can be powered via GPIOs, in this case port0 *can*
-+ * act as a host (with a cable/adapter ignoring CC), as VBUS is
-+ * then provided by the GPIOs. Any user of this setup would
-+ * need to adjust the DT accordingly: dr_mode set to "host",
-+ * enabling OHCI0 and EHCI0.
-+ */
-+ dr_mode = "peripheral";
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb1_vbus-supply = <®_usb1_vbus>;
-+ status = "okay";
-+};
projects / openwrt / staging / xback.git / commitdiff