--- /dev/null
+/*
+ * TP-LINK TL-WR1043ND board support
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/input.h>
+
+#include <asm/mips_machine.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "devices.h"
+
+#define TL_WR1043ND_GPIO_LED_SYSTEM 2
+#define TL_WR1043ND_GPIO_LED_QSS 5
+
+#define TL_WR1043ND_GPIO_BTN_RESET 3
+#define TL_WR1043ND_GPIO_BTN_QSS 7
+
+#define TL_WR1043ND_BUTTONS_POLL_INTERVAL 20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition tl_wr1043nd_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "kernel",
+ .offset = 0x020000,
+ .size = 0x140000,
+ } , {
+ .name = "rootfs",
+ .offset = 0x160000,
+ .size = 0x690000,
+ } , {
+ .name = "art",
+ .offset = 0x7f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "firmware",
+ .offset = 0x020000,
+ .size = 0x7d0000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data tl_wr1043nd_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .parts = tl_wr1043nd_partitions,
+ .nr_parts = ARRAY_SIZE(tl_wr1043nd_partitions),
+#endif
+};
+
+static struct spi_board_info tl_wr1043nd_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .platform_data = &tl_wr1043nd_flash_data,
+ }
+};
+
+static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = {
+ {
+ .name = "tl-wr1043nd:green:system",
+ .gpio = TL_WR1043ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tl-wr1043nd:red:qss",
+ .gpio = TL_WR1043ND_GPIO_LED_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_button tl_wr1043nd_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 5,
+ .gpio = TL_WR1043ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .threshold = 5,
+ .gpio = TL_WR1043ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_wr1043nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+
+ ar71xx_set_mac_base(mac);
+
+ ar71xx_add_device_mdio(0x0);
+
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ar71xx_eth0_data.phy_mask = 0x0;
+ ar71xx_eth0_data.speed = SPEED_1000;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+ ar71xx_add_device_eth(0);
+
+ ar71xx_add_device_usb();
+
+ ar71xx_add_device_spi(NULL, tl_wr1043nd_spi_info,
+ ARRAY_SIZE(tl_wr1043nd_spi_info));
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
+ tl_wr1043nd_leds_gpio);
+
+ ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr1043nd_gpio_buttons),
+ tl_wr1043nd_gpio_buttons);
+ ar91xx_add_device_wmac();
+}
+
+MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TP-LINK TL-WR1043ND", tl_wr1043nd_setup);
$(call Image/Build/Template/TPLINK/$(1),tl-wr941ndv2,board=TL-WR941ND,TL-WR941NDv2)
endef
+define Image/Build/Profile/TLWR1043NDV1
+ $(call Image/Build/Template/TPLINK/$(1),tl-wr1043ndv1,board=TL-WR1043ND,TL-WR1043NDv1)
+endef
+
define Image/Build/Profile/WNDR3700
$(call Image/Build/Template/WNDR3700/$(1),wndr3700,board=WNDR3700)
endef
$(call Image/Build/Profile/TLWR841NDV3,$(1))
$(call Image/Build/Profile/TLWR841NDV5,$(1))
$(call Image/Build/Profile/TLWR941NDV2,$(1))
+ $(call Image/Build/Profile/TLWR1043NDV1,$(1))
$(call Image/Build/Profile/UBNT,$(1))
$(call Image/Build/Profile/WP543,$(1))
$(call Image/Build/Profile/WNDR3700,$(1))
projects / openwrt / staging / chunkeey.git / commitdiff