qlge: Prepare to add new device.

This organizes a few calls into a function table to enable adding new
devices.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 2103fe6ff3a521b21dd0d81153df2fb6f112d81c..7bf18c6d7bc0a609f5da7c9fbe3ea301bd2e3f1a 100644 (file)
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -28,7 +28,7 @@
        } while (0)
 
 #define QLGE_VENDOR_ID    0x1077
-#define QLGE_DEVICE_ID    0x8012
+#define QLGE_DEVICE_ID_8012    0x8012
 
 #define MAX_CPUS 8
 #define MAX_TX_RINGS MAX_CPUS
@@ -798,7 +798,7 @@ struct mbox_params {
        int out_count;
 };
 
-struct flash_params {
+struct flash_params_8012 {
        u8 dev_id_str[4];
        __le16 size;
        __le16 csum;
@@ -808,6 +808,9 @@ struct flash_params {
        __le16 res;
 };
 
+union flash_params {
+       struct flash_params_8012 flash_params_8012;
+};
 
 /*
  * doorbell space for the rx ring context
@@ -1367,6 +1370,12 @@ enum {
        CFG_DEFAULT_MAX_FRAME_SIZE = 0x00002580,
 };
 
+struct nic_operations {
+
+       int (*get_flash) (struct ql_adapter *);
+       int (*port_initialize) (struct ql_adapter *);
+};
+
 /*
  * The main Adapter structure definition.
  * This structure has all fields relevant to the hardware.
@@ -1444,7 +1453,7 @@ struct ql_adapter {
        u32 port_init;
        u32 link_status;
 
-       struct flash_params flash;
+       union flash_params flash;
 
        struct net_device_stats stats;
        struct workqueue_struct *q_workqueue;
@@ -1452,6 +1461,8 @@ struct ql_adapter {
        struct delayed_work asic_reset_work;
        struct delayed_work mpi_reset_work;
        struct delayed_work mpi_work;
+       struct nic_operations *nic_ops;
+       u16 device_id;
 };
 
 /*

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index b144b6becfeaaf3279410d06893f02975f36edc3..d1d8f05d5a116c202df7c3da3ed962e4a4328053 100644 (file)
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -75,7 +75,7 @@ module_param(irq_type, int, MSIX_IRQ);
 MODULE_PARM_DESC(irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy.");
 
 static struct pci_device_id qlge_pci_tbl[] __devinitdata = {
-       {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID)},
+       {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8012)},
        /* required last entry */
        {0,}
 };
@@ -623,6 +623,28 @@ static void ql_enable_all_completion_interrupts(struct ql_adapter *qdev)
 
 }
 
+static int ql_validate_flash(struct ql_adapter *qdev, u32 size, const char *str)
+{
+       int status, i;
+       u16 csum = 0;
+       __le16 *flash = (__le16 *)&qdev->flash;
+
+       status = strncmp((char *)&qdev->flash, str, 4);
+       if (status) {
+               QPRINTK(qdev, IFUP, ERR, "Invalid flash signature.\n");
+               return  status;
+       }
+
+       for (i = 0; i < size; i++)
+               csum += le16_to_cpu(*flash++);
+
+       if (csum)
+               QPRINTK(qdev, IFUP, ERR,
+                       "Invalid flash checksum, csum = 0x%.04x.\n", csum);
+
+       return csum;
+}
+
 static int ql_read_flash_word(struct ql_adapter *qdev, int offset, __le32 *data)
 {
        int status = 0;
@@ -647,23 +669,24 @@ exit:
        return status;
 }
 
-static int ql_get_flash_params(struct ql_adapter *qdev)
+static int ql_get_8012_flash_params(struct ql_adapter *qdev)
 {
        int i;
        int status;
        __le32 *p = (__le32 *)&qdev->flash;
        u32 offset = 0;
+       u32 size = sizeof(struct flash_params_8012) / sizeof(u32);
 
        /* Second function's parameters follow the first
         * function's.
         */
        if (qdev->func)
-               offset = sizeof(qdev->flash) / sizeof(u32);
+               offset = size;
 
        if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
                return -ETIMEDOUT;
 
-       for (i = 0; i < sizeof(qdev->flash) / sizeof(u32); i++, p++) {
+       for (i = 0; i < size; i++, p++) {
                status = ql_read_flash_word(qdev, i+offset, p);
                if (status) {
                        QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n");
@@ -671,6 +694,25 @@ static int ql_get_flash_params(struct ql_adapter *qdev)
                }
 
        }
+
+       status = ql_validate_flash(qdev,
+                       sizeof(struct flash_params_8012) / sizeof(u16),
+                       "8012");
+       if (status) {
+               QPRINTK(qdev, IFUP, ERR, "Invalid flash.\n");
+               status = -EINVAL;
+               goto exit;
+       }
+
+       if (!is_valid_ether_addr(qdev->flash.flash_params_8012.mac_addr)) {
+               status = -EINVAL;
+               goto exit;
+       }
+
+       memcpy(qdev->ndev->dev_addr,
+               qdev->flash.flash_params_8012.mac_addr,
+               qdev->ndev->addr_len);
+
 exit:
        ql_sem_unlock(qdev, SEM_FLASH_MASK);
        return status;
@@ -747,7 +789,7 @@ exit:
  * This functionality may be done in the MPI firmware at a
  * later date.
  */
-static int ql_port_initialize(struct ql_adapter *qdev)
+static int ql_8012_port_initialize(struct ql_adapter *qdev)
 {
        int status = 0;
        u32 data;
@@ -2994,11 +3036,12 @@ static int ql_adapter_initialize(struct ql_adapter *qdev)
                }
        }
 
-       status = ql_port_initialize(qdev);
-       if (status) {
-               QPRINTK(qdev, IFUP, ERR, "Failed to start port.\n");
-               return status;
-       }
+       /* Initialize the port and set the max framesize. */
+       status = qdev->nic_ops->port_initialize(qdev);
+       if (status) {
+              QPRINTK(qdev, IFUP, ERR, "Failed to start port.\n");
+              return status;
+       }
 
        /* Set up the MAC address and frame routing filter. */
        status = ql_cam_route_initialize(qdev);
@@ -3509,6 +3552,12 @@ static void ql_asic_reset_work(struct work_struct *work)
        ql_cycle_adapter(qdev);
 }
 
+static struct nic_operations qla8012_nic_ops = {
+       .get_flash              = ql_get_8012_flash_params,
+       .port_initialize        = ql_8012_port_initialize,
+};
+
+
 static void ql_get_board_info(struct ql_adapter *qdev)
 {
        qdev->func =
@@ -3527,6 +3576,9 @@ static void ql_get_board_info(struct ql_adapter *qdev)
                qdev->mailbox_out = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC0_MBO;
        }
        qdev->chip_rev_id = ql_read32(qdev, REV_ID);
+       qdev->device_id = qdev->pdev->device;
+       if (qdev->device_id == QLGE_DEVICE_ID_8012)
+               qdev->nic_ops = &qla8012_nic_ops;
 }
 
 static void ql_release_all(struct pci_dev *pdev)
@@ -3619,24 +3671,20 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
                goto err_out;
        }
 
-       ql_get_board_info(qdev);
        qdev->ndev = ndev;
        qdev->pdev = pdev;
+       ql_get_board_info(qdev);
        qdev->msg_enable = netif_msg_init(debug, default_msg);
        spin_lock_init(&qdev->hw_lock);
        spin_lock_init(&qdev->stats_lock);
 
        /* make sure the EEPROM is good */
-       err = ql_get_flash_params(qdev);
+       err = qdev->nic_ops->get_flash(qdev);
        if (err) {
                dev_err(&pdev->dev, "Invalid FLASH.\n");
                goto err_out;
        }
 
-       if (!is_valid_ether_addr(qdev->flash.mac_addr))
-               goto err_out;
-
-       memcpy(ndev->dev_addr, qdev->flash.mac_addr, ndev->addr_len);
        memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
 
        /* Set up the default ring sizes. */