--- /dev/null
+--- /dev/null
++++ b/board/arcadyan/vgv7519/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+--- /dev/null
++++ b/board/arcadyan/vgv7519/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+--- /dev/null
++++ b/board/arcadyan/vgv7519/ddr_settings.h
+@@ -0,0 +1,70 @@
++/*
++ * Copyright (C) 2016 Mathias Kresin <dev@kresin.me>
++ *
++ * The values have been extracted from original brnboot.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_CCR00_VALUE 0x101
++#define MC_CCR01_VALUE 0x1000100
++#define MC_CCR02_VALUE 0x1010000
++#define MC_CCR03_VALUE 0x100
++#define MC_CCR04_VALUE 0x1000000
++#define MC_CCR05_VALUE 0x1000101
++#define MC_CCR06_VALUE 0x1000100
++#define MC_CCR07_VALUE 0x1010000
++#define MC_CCR08_VALUE 0x1000101
++#define MC_CCR09_VALUE 0x0
++#define MC_CCR10_VALUE 0x2000100
++#define MC_CCR11_VALUE 0x2000401
++#define MC_CCR12_VALUE 0x30000
++#define MC_CCR13_VALUE 0x202
++#define MC_CCR14_VALUE 0x7080A0F
++#define MC_CCR15_VALUE 0x2040F
++#define MC_CCR16_VALUE 0x40000
++#define MC_CCR17_VALUE 0x70102
++#define MC_CCR18_VALUE 0x4020002
++#define MC_CCR19_VALUE 0x30302
++#define MC_CCR20_VALUE 0x8000700
++#define MC_CCR21_VALUE 0x40F020A
++#define MC_CCR22_VALUE 0x0
++#define MC_CCR23_VALUE 0xC020000
++#define MC_CCR24_VALUE 0x4401B04
++#define MC_CCR25_VALUE 0x0
++#define MC_CCR26_VALUE 0x0
++#define MC_CCR27_VALUE 0x6420000
++#define MC_CCR28_VALUE 0x0
++#define MC_CCR29_VALUE 0x0
++#define MC_CCR30_VALUE 0x798
++#define MC_CCR31_VALUE 0x2040F
++#define MC_CCR32_VALUE 0x0
++#define MC_CCR33_VALUE 0x650000
++#define MC_CCR34_VALUE 0x200C8
++#define MC_CCR35_VALUE 0x1D445D
++#define MC_CCR36_VALUE 0xC8
++#define MC_CCR37_VALUE 0xC351
++#define MC_CCR38_VALUE 0x0
++#define MC_CCR39_VALUE 0x141F04
++#define MC_CCR40_VALUE 0x142704
++#define MC_CCR41_VALUE 0x141B42
++#define MC_CCR42_VALUE 0x141B42
++#define MC_CCR43_VALUE 0x566504
++#define MC_CCR44_VALUE 0x566504
++#define MC_CCR45_VALUE 0x565F17
++#define MC_CCR46_VALUE 0x565F17
++#define MC_CCR47_VALUE 0x2040F
++#define MC_CCR48_VALUE 0x0
++#define MC_CCR49_VALUE 0x0
++#define MC_CCR50_VALUE 0x0
++#define MC_CCR51_VALUE 0x0
++#define MC_CCR52_VALUE 0x133
++#define MC_CCR53_VALUE 0xF3014B27
++#define MC_CCR54_VALUE 0xF3014B27
++#define MC_CCR55_VALUE 0xF3014B27
++#define MC_CCR56_VALUE 0xF3014B27
++#define MC_CCR57_VALUE 0x7800301
++#define MC_CCR58_VALUE 0x7800301
++#define MC_CCR59_VALUE 0x7800301
++#define MC_CCR60_VALUE 0x7800301
++#define MC_CCR61_VALUE 0x4
+--- /dev/null
++++ b/board/arcadyan/vgv7519/vgv7519.c
+@@ -0,0 +1,95 @@
++/*
++ * This file is released under the terms of GPL v2 and any later version.
++ * See the file COPYING in the root directory of the source tree for details.
++ *
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ */
++
++#include <common.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/chipid.h>
++#include <asm/lantiq/cpu.h>
++#include <asm/arch/gphy.h>
++
++#if defined(CONFIG_SYS_BOOT_RAM)
++#define do_gpio_init 1
++#define do_pll_init 0
++#define do_dcdc_init 1
++#elif defined(CONFIG_SYS_BOOT_NOR)
++#define do_gpio_init 1
++#define do_pll_init 1
++#define do_dcdc_init 1
++#else
++#define do_gpio_init 0
++#define do_pll_init 0
++#define do_dcdc_init 1
++#endif
++
++#define GPIO_GPHY_RESET 47
++
++static void gpio_init(void)
++{
++ /* Disable reset on external eth PHY */
++ gpio_direction_output(GPIO_GPHY_RESET, 1);
++}
++
++int board_early_init_f(void)
++{
++ if (do_gpio_init)
++ gpio_init();
++
++ if (do_pll_init)
++ ltq_pll_init();
++
++ if (do_dcdc_init)
++ ltq_dcdc_init(0x7F);
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
++ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++ /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
++ { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++ /* GMAC2: internal GPHY0 with 10/100/1000 firmware for LAN port 2 */
++ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++ /* GMAC3: unused */
++ { 3, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
++ /* GMAC4: internal GPHY1 with 10/100/1000 firmware for LAN port 3 */
++ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++ /* GMAC5: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */
++ { 5, 0x5, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t * bis)
++{
++ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
++ const ulong fw_addr = 0x80FF0000;
++
++ if (ltq_chip_version_get() == 1)
++ ltq_gphy_phy22f_a1x_load(fw_addr);
++ else
++ ltq_gphy_phy22f_a2x_load(fw_addr);
++
++ ltq_cgu_gphy_clk_src(clk);
++
++ ltq_rcu_gphy_boot(0, fw_addr);
++ ltq_rcu_gphy_boot(1, fw_addr);
++
++ return ltq_eth_initialize(ð_board_config);
++}
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -537,6 +537,9 @@ Active mips mips32 incai
+ Active mips mips32 vrx200 arcadyan vgv7510kw22 vgv7510kw22_brn vgv7510kw22:SYS_BOOT_BRN Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ Active mips mips32 vrx200 arcadyan vgv7510kw22 vgv7510kw22_nor vgv7510kw22:SYS_BOOT_NOR Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ Active mips mips32 vrx200 arcadyan vgv7510kw22 vgv7510kw22_ram vgv7510kw22:SYS_BOOT_RAM Martin Blumenstingl <martin.blumenstingl@googlemail.com>
++Active mips mips32 vrx200 arcadyan vgv7519 vgv7519_brn vgv7519:SYS_BOOT_BRN Mathias Kresin <dev@kresin.me>
++Active mips mips32 vrx200 arcadyan vgv7519 vgv7519_nor vgv7519:SYS_BOOT_NOR Eddi De Pieri <eddi@depieri.net>
++Active mips mips32 vrx200 arcadyan vgv7519 vgv7519_ram vgv7519:SYS_BOOT_RAM Eddi De Pieri <eddi@depieri.net>
+ Active mips mips32 vrx200 avm fb3370 fb3370_eva fb3370:SYS_BOOT_EVA Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 avm fb3370 fb3370_ram fb3370:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 avm fb3370 fb3370_sfspl fb3370:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+--- /dev/null
++++ b/include/configs/vgv7519.h
+@@ -0,0 +1,62 @@
++/*
++ * This file is released under the terms of GPL v2 and any later version.
++ * See the file COPYING in the root directory of the source tree for details.
++ *
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "VGV7519"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Arcadyan VGV7519"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
++#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH2_BASE }
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_IS_NOWHERE
++#define CONFIG_ENV_OVERWRITE 1
++#elif defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (384 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY VRX200 */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ "kernel_addr=0xB0080000\0"
++
++#endif /* __CONFIG_H */
projects / openwrt / staging / thess.git / commitdiff