-LINUX_VERSION-6.6 = .22
-LINUX_KERNEL_HASH-6.6.22 = 23e3e7b56407250f5411bdab95763d0bc4e3a19dfa431d951df7eacabd61a2f4
+LINUX_VERSION-6.6 = .23
+LINUX_KERNEL_HASH-6.6.23 = 200fd119cb9ef06bcedcdb52be00ba443163eab154295c5831fed9a12211a8b9
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -597,6 +597,7 @@
+@@ -594,6 +594,7 @@
reg-names = "nand", "nand-int-base";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "nand_ctlrdy";
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -344,7 +344,7 @@
+@@ -341,7 +341,7 @@
gpio0: gpio-controller@500 {
compatible = "brcm,bcm6345-gpio";
reg-names = "dirout", "dat";
--- /dev/null
+From: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
+
+E.g. ESMT chips will return an identification code with a length of 5
+bytes. In order to prevent ambiguity, flash chips would actually need to
+return IDs that are up to 17 or more bytes long due to JEDEC's
+continuation scheme. I understand that if a manufacturer ID is located
+in bank N of JEDEC's database (there are currently 16 banks), N - 1
+continuation codes (7Fh) need to be added to the identification code
+(comprising of manufacturer ID and device ID). However, most flash chip
+manufacturers don't seem to implement this (correctly).
+
+Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
+---
+ include/linux/mtd/spinand.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/include/linux/mtd/spinand.h
++++ b/include/linux/mtd/spinand.h
+@@ -169,7 +169,7 @@
+ struct spinand_op;
+ struct spinand_device;
+
+-#define SPINAND_MAX_ID_LEN 4
++#define SPINAND_MAX_ID_LEN 5
+ /*
+ * For erase, write and read operation, we got the following timings :
+ * tBERS (erase) 1ms to 4ms
--- a/net/core/dev.c
+++ b/net/core/dev.c
-@@ -7686,6 +7686,48 @@ static void __netdev_adjacent_dev_unlink
+@@ -7689,6 +7689,48 @@ static void __netdev_adjacent_dev_unlink
&upper_dev->adj_list.lower);
}
static int __netdev_upper_dev_link(struct net_device *dev,
struct net_device *upper_dev, bool master,
void *upper_priv, void *upper_info,
-@@ -7737,6 +7779,7 @@ static int __netdev_upper_dev_link(struc
+@@ -7740,6 +7782,7 @@ static int __netdev_upper_dev_link(struc
if (ret)
return ret;
ret = call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
&changeupper_info.info);
ret = notifier_to_errno(ret);
-@@ -7833,6 +7876,7 @@ static void __netdev_upper_dev_unlink(st
+@@ -7836,6 +7879,7 @@ static void __netdev_upper_dev_unlink(st
__netdev_adjacent_dev_unlink_neighbour(dev, upper_dev);
call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
&changeupper_info.info);
-@@ -8889,6 +8933,7 @@ int dev_set_mac_address(struct net_devic
+@@ -8892,6 +8936,7 @@ int dev_set_mac_address(struct net_devic
return err;
}
dev->addr_assign_type = NET_ADDR_SET;
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
-@@ -8213,7 +8213,7 @@ static int nft_register_flowtable_net_ho
+@@ -8214,7 +8214,7 @@ static int nft_register_flowtable_net_ho
err = flowtable->data.type->setup(&flowtable->data,
hook->ops.dev,
FLOW_BLOCK_BIND);
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -4982,6 +4982,8 @@ static int mtk_probe(struct platform_dev
+@@ -4981,6 +4981,8 @@ static int mtk_probe(struct platform_dev
* for NAPI to work
*/
init_dummy_netdev(ð->dummy_dev);
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2268,6 +2268,10 @@ mt7530_setup(struct dsa_switch *ds)
+@@ -2304,6 +2304,10 @@ mt7530_setup(struct dsa_switch *ds)
return -ENODEV;
}
#include <net/page_pool/helpers.h>
#include "mtk_eth_soc.h"
-@@ -1579,12 +1580,28 @@ static void mtk_wake_queue(struct mtk_et
+@@ -1578,12 +1579,28 @@ static void mtk_wake_queue(struct mtk_et
}
}
bool gso = false;
int tx_num;
-@@ -1606,6 +1623,18 @@ static netdev_tx_t mtk_start_xmit(struct
+@@ -1605,6 +1622,18 @@ static netdev_tx_t mtk_start_xmit(struct
return NETDEV_TX_BUSY;
}
/* TSO: fill MSS info in tcp checksum field */
if (skb_is_gso(skb)) {
if (skb_cow_head(skb, 0)) {
-@@ -1621,8 +1650,14 @@ static netdev_tx_t mtk_start_xmit(struct
+@@ -1620,8 +1649,14 @@ static netdev_tx_t mtk_start_xmit(struct
}
}
+++ /dev/null
-From ef5976ae4e117fae9a61bb3c0f8319a917a425ea Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 11 Mar 2024 17:43:28 +0000
-Subject: [PATCH] net: mediatek: mtk_eth_soc: release MAC_MCR_FORCE_LINK only when MAC is up
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Clearing bit MAC_MCR_FORCE_LINK which forces the link down too early
-can result in MAC ending up in a broken/blocked state.
-
-Fix this by handling this bit in the .mac_link_up and .mac_link_down
-calls instead of in .mac_finish.
-
-Fixes: b8fc9f30821ec ("net: ethernet: mediatek: Add basic PHYLINK support")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -678,8 +678,7 @@ static int mtk_mac_finish(struct phylink
- mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
- mcr_new = mcr_cur;
- mcr_new |= MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE |
-- MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_LINK |
-- MAC_MCR_RX_FIFO_CLR_DIS;
-+ MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_RX_FIFO_CLR_DIS;
-
- /* Only update control register when needed! */
- if (mcr_new != mcr_cur)
-@@ -695,7 +694,7 @@ static void mtk_mac_link_down(struct phy
- phylink_config);
- u32 mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
-
-- mcr &= ~(MAC_MCR_TX_EN | MAC_MCR_RX_EN);
-+ mcr &= ~(MAC_MCR_TX_EN | MAC_MCR_RX_EN | MAC_MCR_FORCE_LINK);
- mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
- }
-
-@@ -804,7 +803,7 @@ static void mtk_mac_link_up(struct phyli
- if (rx_pause)
- mcr |= MAC_MCR_FORCE_RX_FC;
-
-- mcr |= MAC_MCR_TX_EN | MAC_MCR_RX_EN;
-+ mcr |= MAC_MCR_TX_EN | MAC_MCR_RX_EN | MAC_MCR_FORCE_LINK;
- mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
- }
-
+++ /dev/null
-From c8262ebbf7ca546dd5ead3c0383a89eb401627ff Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 13 Mar 2024 17:55:02 +0000
-Subject: [PATCH] net: ethernet: mtk_eth_soc: fix PPE hanging issue
-
-A patch to resolve an issue was found in MediaTek's GPL-licensed SDK:
-In the mtk_ppe_stop() function, the PPE scan mode is not disabled before
-disabling the PPE. This can potentially lead to a hang during the process
-of disabling the PPE.
-
-Without this patch, the PPE may experience a hang during the reboot test.
-
-Reference: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/b40da332dfe763932a82f9f62a4709457a15dd6c
-
-Suggested-by: Bc-bocun Chen <bc-bocun.chen@mediatek.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/ethernet/mediatek/mtk_ppe.c | 18 +++++++++++-------
- 1 file changed, 11 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -1002,7 +1002,7 @@ void mtk_ppe_start(struct mtk_ppe *ppe)
- MTK_PPE_KEEPALIVE_DISABLE) |
- FIELD_PREP(MTK_PPE_TB_CFG_HASH_MODE, 1) |
- FIELD_PREP(MTK_PPE_TB_CFG_SCAN_MODE,
-- MTK_PPE_SCAN_MODE_KEEPALIVE_AGE) |
-+ MTK_PPE_SCAN_MODE_CHECK_AGE) |
- FIELD_PREP(MTK_PPE_TB_CFG_ENTRY_NUM,
- MTK_PPE_ENTRIES_SHIFT);
- if (mtk_is_netsys_v2_or_greater(ppe->eth))
-@@ -1098,17 +1098,21 @@ int mtk_ppe_stop(struct mtk_ppe *ppe)
-
- mtk_ppe_cache_enable(ppe, false);
-
-- /* disable offload engine */
-- ppe_clear(ppe, MTK_PPE_GLO_CFG, MTK_PPE_GLO_CFG_EN);
-- ppe_w32(ppe, MTK_PPE_FLOW_CFG, 0);
--
- /* disable aging */
- val = MTK_PPE_TB_CFG_AGE_NON_L4 |
- MTK_PPE_TB_CFG_AGE_UNBIND |
- MTK_PPE_TB_CFG_AGE_TCP |
- MTK_PPE_TB_CFG_AGE_UDP |
-- MTK_PPE_TB_CFG_AGE_TCP_FIN;
-+ MTK_PPE_TB_CFG_AGE_TCP_FIN |
-+ MTK_PPE_TB_CFG_SCAN_MODE;
- ppe_clear(ppe, MTK_PPE_TB_CFG, val);
-
-- return mtk_ppe_wait_busy(ppe);
-+ if (mtk_ppe_wait_busy(ppe))
-+ return -ETIMEDOUT;
-+
-+ /* disable offload engine */
-+ ppe_clear(ppe, MTK_PPE_GLO_CFG, MTK_PPE_GLO_CFG_EN);
-+ ppe_w32(ppe, MTK_PPE_FLOW_CFG, 0);
-+
-+ return 0;
- }
void netif_napi_add_weight(struct net_device *dev, struct napi_struct *napi,
int (*poll)(struct napi_struct *, int), int weight)
{
-@@ -11348,6 +11419,9 @@ static int dev_cpu_dead(unsigned int old
+@@ -11351,6 +11422,9 @@ static int dev_cpu_dead(unsigned int old
raise_softirq_irqoff(NET_TX_SOFTIRQ);
local_irq_enable();
#ifdef CONFIG_RPS
remsd = oldsd->rps_ipi_list;
oldsd->rps_ipi_list = NULL;
-@@ -11663,6 +11737,7 @@ static int __init net_dev_init(void)
+@@ -11666,6 +11740,7 @@ static int __init net_dev_init(void)
INIT_CSD(&sd->defer_csd, trigger_rx_softirq, sd);
spin_lock_init(&sd->defer_lock);
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
-@@ -2156,10 +2156,13 @@ mt7530_setup_mdio(struct mt7530_priv *pr
+@@ -2192,10 +2192,13 @@ mt7530_setup_mdio(struct mt7530_priv *pr
{
struct dsa_switch *ds = priv->ds;
struct device *dev = priv->dev;
bus = devm_mdiobus_alloc(dev);
if (!bus)
return -ENOMEM;
-@@ -2178,7 +2181,9 @@ mt7530_setup_mdio(struct mt7530_priv *pr
+@@ -2214,7 +2217,9 @@ mt7530_setup_mdio(struct mt7530_priv *pr
if (priv->irq)
mt7530_setup_mdio_irq(priv);
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
-@@ -1819,4 +1819,19 @@ config GPIO_SIM
+@@ -1820,4 +1820,19 @@ config GPIO_SIM
endmenu
help
--- a/init/main.c
+++ b/init/main.c
-@@ -608,6 +608,29 @@ static inline void setup_nr_cpu_ids(void
+@@ -609,6 +609,29 @@ static inline void setup_nr_cpu_ids(void
static inline void smp_prepare_cpus(unsigned int maxcpus) { }
#endif
/*
* We need to store the untouched command line for future reference.
* We also need to store the touched command line since the parameter
-@@ -895,6 +918,7 @@ void start_kernel(void)
+@@ -896,6 +919,7 @@ void start_kernel(void)
pr_notice("%s", linux_banner);
early_security_init();
setup_arch(&command_line);
memory@40000000 {
- reg = <0 0x40000000 0 0x20000000>;
+ reg = <0 0x40000000 0 0x40000000>;
+ device_type = "memory";
};
- reg_1p8v: regulator-1p8v {
-@@ -132,22 +131,22 @@
+@@ -133,22 +132,22 @@
port@0 {
reg = <0>;
};
port@4 {
-@@ -239,7 +238,22 @@
+@@ -240,7 +239,22 @@
status = "okay";
};
/* eMMC is shared pin with parallel NAND */
emmc_pins_default: emmc-pins-default {
mux {
-@@ -516,11 +530,11 @@
+@@ -517,11 +531,11 @@
};
&sata {
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -108,10 +108,6 @@
+@@ -109,10 +109,6 @@
status = "disabled";
};
pinctrl-0 = <&irrx_pins>;
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -89,10 +89,6 @@
+@@ -90,10 +90,6 @@
status = "disabled";
};
};
chosen {
-@@ -164,22 +165,22 @@
+@@ -165,22 +166,22 @@
port@1 {
reg = <1>;
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -587,6 +587,10 @@
+@@ -588,6 +588,10 @@
status = "okay";
};
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -533,6 +533,65 @@
+@@ -534,6 +534,65 @@
status = "disabled";
};
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -574,7 +574,7 @@
+@@ -575,7 +575,7 @@
reg = <0x140000 0x0080000>;
};
label = "Factory";
reg = <0x1c0000 0x0100000>;
};
-@@ -635,5 +635,6 @@
+@@ -636,5 +636,6 @@
&wmac {
pinctrl-names = "default";
pinctrl-0 = <&wmac_pins>;
+++ /dev/null
-From fc157139e6b7f8dfb6430ac7191ba754027705e8 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 18 Feb 2024 01:59:59 +0000
-Subject: [PATCH] clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical
-
-Without the SGM_REG_SEL clock enabled the system freezes if trying to
-access registers used by MT7981 clock drivers itself.
-Mark SGM_REG_SEL as critical to make sure it is always enabled to
-prevent freezes on boot depending on probe order.
-
-Fixes: 813c3b53b55ba ("clk: mediatek: add MT7981 clock support")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/clk/mediatek/clk-mt7981-topckgen.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mt7981-topckgen.c
-+++ b/drivers/clk/mediatek/clk-mt7981-topckgen.c
-@@ -357,8 +357,9 @@ static const struct mtk_mux top_muxes[]
- MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_325M_SEL, "sgm_325m_sel",
- sgm_325m_parents, 0x050, 0x054, 0x058, 8, 1, 15,
- 0x1C0, 21),
-- MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents,
-- 0x050, 0x054, 0x058, 16, 1, 23, 0x1C0, 22),
-+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents,
-+ 0x050, 0x054, 0x058, 16, 1, 23, 0x1C0, 22,
-+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
- MUX_GATE_CLR_SET_UPD(CLK_TOP_EIP97B_SEL, "eip97b_sel", eip97b_parents,
- 0x050, 0x054, 0x058, 24, 3, 31, 0x1C0, 23),
- /* CLK_CFG_6 */
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -547,6 +547,7 @@
+@@ -548,6 +548,7 @@
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
nand-ecc-engine = <&snfi>;
if (mdata->dev_comp->need_pad_sel && spi_get_csgpiod(spi, 0))
/* CS de-asserted, gpiolib will handle inversion */
gpiod_direction_output(spi_get_csgpiod(spi, 0), 0);
-@@ -1138,6 +1126,10 @@ static int mtk_spi_probe(struct platform
+@@ -1140,6 +1128,10 @@ static int mtk_spi_probe(struct platform
mdata = spi_master_get_devdata(master);
mdata->dev_comp = device_get_match_data(dev);
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
-@@ -832,6 +832,21 @@ static irqreturn_t mtk_spi_interrupt(int
+@@ -834,6 +834,21 @@ static irqreturn_t mtk_spi_interrupt(int
return IRQ_HANDLED;
}
static int mtk_spi_mem_adjust_op_size(struct spi_mem *mem,
struct spi_mem_op *op)
{
-@@ -1122,6 +1137,7 @@ static int mtk_spi_probe(struct platform
+@@ -1124,6 +1139,7 @@ static int mtk_spi_probe(struct platform
master->setup = mtk_spi_setup;
master->set_cs_timing = mtk_spi_set_hw_cs_timing;
master->use_gpio_descriptors = true;
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -1241,7 +1241,7 @@ static int lvts_probe(struct platform_de
+@@ -1243,7 +1243,7 @@ static int lvts_probe(struct platform_de
return 0;
}
{
struct lvts_domain *lvts_td;
int i;
-@@ -1252,8 +1252,6 @@ static int lvts_remove(struct platform_d
+@@ -1254,8 +1254,6 @@ static int lvts_remove(struct platform_d
lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false);
lvts_debugfs_exit(lvts_td);
}
static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
-@@ -1354,7 +1352,7 @@ MODULE_DEVICE_TABLE(of, lvts_of_match);
+@@ -1356,7 +1354,7 @@ MODULE_DEVICE_TABLE(of, lvts_of_match);
static struct platform_driver lvts_driver = {
.probe = lvts_probe,
bool should_update_thresh;
lvts_sensor->low_thresh = low;
-@@ -692,7 +701,7 @@ static int lvts_calibration_read(struct
+@@ -694,7 +703,7 @@ static int lvts_calibration_read(struct
return 0;
}
{
u32 gt;
-@@ -701,7 +710,7 @@ static int lvts_golden_temp_init(struct
+@@ -703,7 +712,7 @@ static int lvts_golden_temp_init(struct
if (gt && gt < LVTS_GOLDEN_TEMP_MAX)
golden_temp = gt;
return 0;
}
-@@ -724,7 +733,7 @@ static int lvts_ctrl_init(struct device
+@@ -726,7 +735,7 @@ static int lvts_ctrl_init(struct device
* The golden temp information is contained in the first chunk
* of efuse data.
*/
if (ret)
return ret;
-@@ -735,6 +744,7 @@ static int lvts_ctrl_init(struct device
+@@ -737,6 +746,7 @@ static int lvts_ctrl_init(struct device
for (i = 0; i < lvts_data->num_lvts_ctrl; i++) {
lvts_ctrl[i].base = lvts_td->base + lvts_data->lvts_ctrl[i].offset;
ret = lvts_sensor_init(dev, &lvts_ctrl[i],
&lvts_data->lvts_ctrl[i]);
-@@ -758,7 +768,8 @@ static int lvts_ctrl_init(struct device
+@@ -760,7 +770,8 @@ static int lvts_ctrl_init(struct device
* after initializing the calibration.
*/
lvts_ctrl[i].hw_tshut_raw_temp =
lvts_ctrl[i].low_thresh = INT_MIN;
lvts_ctrl[i].high_thresh = INT_MIN;
-@@ -1223,6 +1234,8 @@ static int lvts_probe(struct platform_de
+@@ -1225,6 +1236,8 @@ static int lvts_probe(struct platform_de
if (irq < 0)
return irq;
ret = lvts_domain_init(dev, lvts_td, lvts_data);
if (ret)
return dev_err_probe(dev, ret, "Failed to initialize the lvts domain\n");
-@@ -1336,11 +1349,15 @@ static const struct lvts_ctrl_data mt819
+@@ -1338,11 +1351,15 @@ static const struct lvts_ctrl_data mt819
static const struct lvts_data mt8195_lvts_mcu_data = {
.lvts_ctrl = mt8195_lvts_mcu_data_ctrl,
.num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
#define LVTS_HW_SHUTDOWN_MT8195 105000
#define LVTS_MINIMUM_THRESHOLD 20000
-@@ -1267,6 +1270,33 @@ static void lvts_remove(struct platform_
+@@ -1269,6 +1272,33 @@ static void lvts_remove(struct platform_
lvts_debugfs_exit(lvts_td);
}
static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
{
.cal_offset = { 0x04, 0x07 },
-@@ -1346,6 +1376,13 @@ static const struct lvts_ctrl_data mt819
+@@ -1348,6 +1378,13 @@ static const struct lvts_ctrl_data mt819
}
};
static const struct lvts_data mt8195_lvts_mcu_data = {
.lvts_ctrl = mt8195_lvts_mcu_data_ctrl,
.num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
-@@ -1361,6 +1398,7 @@ static const struct lvts_data mt8195_lvt
+@@ -1363,6 +1400,7 @@ static const struct lvts_data mt8195_lvt
};
static const struct of_device_id lvts_of_match[] = {
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -1297,6 +1297,38 @@ static const struct lvts_ctrl_data mt798
+@@ -1299,6 +1299,38 @@ static const struct lvts_ctrl_data mt798
}
};
static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
{
.cal_offset = { 0x04, 0x07 },
-@@ -1405,12 +1437,17 @@ static const struct of_device_id lvts_of
+@@ -1407,12 +1439,17 @@ static const struct of_device_id lvts_of
};
MODULE_DEVICE_TABLE(of, lvts_of_match);
#define LVTS_HW_SHUTDOWN_MT8195 105000
#define LVTS_MINIMUM_THRESHOLD 20000
-@@ -1329,6 +1330,88 @@ static int lvts_resume(struct device *de
+@@ -1331,6 +1332,88 @@ static int lvts_resume(struct device *de
return 0;
}
static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
{
.cal_offset = { 0x04, 0x07 },
-@@ -1415,6 +1498,16 @@ static const struct lvts_data mt7988_lvt
+@@ -1417,6 +1500,16 @@ static const struct lvts_data mt7988_lvt
.temp_offset = LVTS_COEFF_B_MT7988,
};
static const struct lvts_data mt8195_lvts_mcu_data = {
.lvts_ctrl = mt8195_lvts_mcu_data_ctrl,
.num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
-@@ -1431,6 +1524,8 @@ static const struct lvts_data mt8195_lvt
+@@ -1433,6 +1526,8 @@ static const struct lvts_data mt8195_lvt
static const struct of_device_id lvts_of_match[] = {
{ .compatible = "mediatek,mt7988-lvts-ap", .data = &mt7988_lvts_ap_data },
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -311,7 +311,7 @@
+@@ -312,7 +312,7 @@
/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
* SATA functions. i.e. output-high: PCIe, output-low: SATA
*/
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -638,5 +638,28 @@
+@@ -639,5 +639,28 @@
};
&wmac {
};
cpus {
-@@ -233,6 +236,26 @@
+@@ -234,6 +237,26 @@
assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
non-removable;
};
&mmc1 {
-@@ -248,6 +271,26 @@
+@@ -249,6 +272,26 @@
vqmmc-supply = <®_3p3v>;
assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
};
&nandc {
-@@ -281,15 +324,30 @@
+@@ -282,15 +325,30 @@
read-only;
};
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
-@@ -1226,8 +1226,15 @@ static int mtk_spi_probe(struct platform
+@@ -1228,8 +1228,15 @@ static int mtk_spi_probe(struct platform
if (ret < 0)
return dev_err_probe(dev, ret, "failed to enable hclk\n");
};
timer {
-@@ -544,10 +538,11 @@
+@@ -543,10 +537,11 @@
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
memory-region = <&wo_emi0>, <&wo_ilm0>, <&wo_dlm0>,
};
wed1: wed@15011000 {
-@@ -557,10 +552,11 @@
+@@ -556,10 +551,11 @@
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
memory-region = <&wo_emi1>, <&wo_ilm1>, <&wo_dlm1>,
};
wo_ccif0: syscon@151a5000 {
-@@ -577,6 +573,11 @@
+@@ -576,6 +572,11 @@
interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
};
wo_data: wo-data@4fd80000 {
reg = <0 0x4fd80000 0 0x240000>;
no-map;
-@@ -537,11 +527,10 @@
+@@ -536,11 +526,10 @@
reg = <0 0x15010000 0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
mediatek,wo-cpuboot = <&wo_cpuboot>;
};
-@@ -551,11 +540,10 @@
+@@ -550,11 +539,10 @@
reg = <0 0x15011000 0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
mediatek,wo-cpuboot = <&wo_cpuboot>;
};
-@@ -573,6 +561,16 @@
+@@ -572,6 +560,16 @@
interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
};
};
timer {
-@@ -527,10 +517,11 @@
+@@ -526,10 +516,11 @@
reg = <0 0x15010000 0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
mediatek,wo-cpuboot = <&wo_cpuboot>;
};
-@@ -540,10 +531,11 @@
+@@ -539,10 +530,11 @@
reg = <0 0x15011000 0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
mediatek,wo-cpuboot = <&wo_cpuboot>;
};
-@@ -571,6 +563,16 @@
+@@ -570,6 +562,16 @@
reg = <0 0x151f0000 0 0x8000>;
};
+ msi-parent = <&gic_v2m0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 142
+ interrupt-map = <0 0 0 1 &intc 0 0 142
@@ -930,8 +929,7 @@
ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */
<0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */
+ msi-parent = <&gic_v2m0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 75
+ interrupt-map = <0 0 0 1 &intc 0 0 75
projects / openwrt / staging / thess.git / commitdiff