qualcommax: ipq807x: fix mac setup for Linksys MX4200v2

Currently for Linksys MX4200v2 all u-boot ethXaddr variables share the same MAC address
and there is no need to check them one by one.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16070
(cherry picked from commit 80c867815636cbf32e85b431c5d06c531e4a371e)
Signed-off-by: Rafal Boni <rafal.boni@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17889
Signed-off-by: Robert Marko <robimarko@gmail.com>

diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network
index 437581d001127a6a7f0a2eb6d64cdd06db69b533..373807048dca6df0cbcc907494920ccf0b3e66a2 100644 (file)
--- a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network
+++ b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network
@@ -82,10 +82,8 @@ ipq807x_setup_macs()
        case "$board" in
                linksys,mx4200v2)
                        label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-                       for i in $(seq 3 5); do
-                               [ "$(mtd_get_mac_ascii u_env eth${i}addr)" != "$label_mac" ] && lan_mac=$label_mac
-                       done
-                       [ "$(mtd_get_mac_ascii u_env eth2addr)" != "$label_mac" ] && wan_mac=$label_mac
+                       [ "$(mtd_get_mac_ascii u_env eth1addr)" != "$label_mac" ] && wan_mac=$label_mac
+                       [ "$(mtd_get_mac_ascii u_env eth2addr)" != "$label_mac" ] && lan_mac=$label_mac
                ;;
                linksys,mx8500)
                        label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)