--- /dev/null
+From c737abc193d16e62e23e2fb585b8b7398ab380d8 Mon Sep 17 00:00:00 2001
+From: allen yan <yanwei@marvell.com>
+Date: Thu, 7 Sep 2017 15:04:53 +0200
+Subject: arm64: dts: marvell: Fix A37xx UART0 register size
+
+Armada-37xx UART0 registers are 0x200 bytes wide. Right next to them are
+the UART1 registers that should not be declared in this node.
+
+Update the example in DT bindings document accordingly.
+
+Signed-off-by: allen yan <yanwei@marvell.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
+Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+---
+ Documentation/devicetree/bindings/serial/mvebu-uart.txt | 2 +-
+ arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt
++++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt
+@@ -8,6 +8,6 @@ Required properties:
+ Example:
+ serial@12000 {
+ compatible = "marvell,armada-3700-uart";
+- reg = <0x12000 0x400>;
++ reg = <0x12000 0x200>;
+ interrupts = <43>;
+ };
+--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
++++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+@@ -134,7 +134,7 @@
+
+ uart0: serial@12000 {
+ compatible = "marvell,armada-3700-uart";
+- reg = <0x12000 0x400>;
++ reg = <0x12000 0x200>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+++ /dev/null
-From adf4e289dd7f801c3fe12e0e6b491e11e548cd3d Mon Sep 17 00:00:00 2001
-From: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Date: Thu, 30 Nov 2017 14:40:27 +0100
-Subject: clk: mvebu: armada-37xx-periph: cosmetic changes
-
-This patches fixes few cosmetic issues such as alignment, blank lines
-and required space.
-
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/mvebu/armada-37xx-periph.c | 17 +++++++++--------
- 1 file changed, 9 insertions(+), 8 deletions(-)
-
---- a/drivers/clk/mvebu/armada-37xx-periph.c
-+++ b/drivers/clk/mvebu/armada-37xx-periph.c
-@@ -79,6 +79,7 @@ static const struct clk_div_table clk_ta
- { .val = 1, .div = 4, },
- { .val = 0, .div = 0, }, /* last entry */
- };
-+
- static const struct clk_ops clk_double_div_ops;
-
- #define PERIPH_GATE(_name, _bit) \
-@@ -217,7 +218,7 @@ PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL
- PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19);
- PERIPH_CLK_MUX_DIV(cpu, 22, DIV_SEL0, 28, clk_table6);
-
--static struct clk_periph_data data_nb[] ={
-+static struct clk_periph_data data_nb[] = {
- REF_CLK_FULL_DD(mmc),
- REF_CLK_FULL_DD(sata_host),
- REF_CLK_FULL_DD(sec_at),
-@@ -281,7 +282,7 @@ static unsigned int get_div(void __iomem
- }
-
- static unsigned long clk_double_div_recalc_rate(struct clk_hw *hw,
-- unsigned long parent_rate)
-+ unsigned long parent_rate)
- {
- struct clk_double_div *double_div = to_clk_double_div(hw);
- unsigned int div;
-@@ -303,6 +304,7 @@ static const struct of_device_id armada_
- .data = data_sb, },
- { }
- };
-+
- static int armada_3700_add_composite_clk(const struct clk_periph_data *data,
- void __iomem *reg, spinlock_t *lock,
- struct device *dev, struct clk_hw **hw)
-@@ -355,9 +357,9 @@ static int armada_3700_add_composite_clk
- }
-
- *hw = clk_hw_register_composite(dev, data->name, data->parent_names,
-- data->num_parents, mux_hw,
-- mux_ops, rate_hw, rate_ops,
-- gate_hw, gate_ops, CLK_IGNORE_UNUSED);
-+ data->num_parents, mux_hw,
-+ mux_ops, rate_hw, rate_ops,
-+ gate_hw, gate_ops, CLK_IGNORE_UNUSED);
-
- if (IS_ERR(*hw))
- return PTR_ERR(*hw);
-@@ -406,12 +408,11 @@ static int armada_3700_periph_clock_prob
- if (armada_3700_add_composite_clk(&data[i], reg,
- &driver_data->lock, dev, hw))
- dev_err(dev, "Can't register periph clock %s\n",
-- data[i].name);
--
-+ data[i].name);
- }
-
- ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
-- driver_data->hw_data);
-+ driver_data->hw_data);
- if (ret) {
- for (i = 0; i < num_periph; i++)
- clk_hw_unregister(driver_data->hw_data->hws[i]);
+++ /dev/null
-From 9818a7a4fd10f72537cdf2a5ec3402f2c245ea24 Mon Sep 17 00:00:00 2001
-From: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Date: Thu, 30 Nov 2017 14:40:28 +0100
-Subject: clk: mvebu: armada-37xx-periph: prepare cpu clk to be
- used with DVFS
-
-When DVFS will be enabled then the cpu clk will use a different set of
-register at run time. That means that we won't be able to use the common
-callback and need to use our own ones.
-
-This patch prepares this change by switching on our own set of callbacks
-without modifying the behavior of the clocks.
-
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/mvebu/armada-37xx-periph.c | 82 ++++++++++++++++++++++++++++++----
- 1 file changed, 73 insertions(+), 9 deletions(-)
-
---- a/drivers/clk/mvebu/armada-37xx-periph.c
-+++ b/drivers/clk/mvebu/armada-37xx-periph.c
-@@ -46,7 +46,17 @@ struct clk_double_div {
- u8 shift2;
- };
-
-+struct clk_pm_cpu {
-+ struct clk_hw hw;
-+ void __iomem *reg_mux;
-+ u8 shift_mux;
-+ u32 mask_mux;
-+ void __iomem *reg_div;
-+ u8 shift_div;
-+};
-+
- #define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw)
-+#define to_clk_pm_cpu(_hw) container_of(_hw, struct clk_pm_cpu, hw)
-
- struct clk_periph_data {
- const char *name;
-@@ -55,6 +65,7 @@ struct clk_periph_data {
- struct clk_hw *mux_hw;
- struct clk_hw *rate_hw;
- struct clk_hw *gate_hw;
-+ struct clk_hw *muxrate_hw;
- bool is_double_div;
- };
-
-@@ -81,6 +92,7 @@ static const struct clk_div_table clk_ta
- };
-
- static const struct clk_ops clk_double_div_ops;
-+static const struct clk_ops clk_pm_cpu_ops;
-
- #define PERIPH_GATE(_name, _bit) \
- struct clk_gate gate_##_name = { \
-@@ -122,6 +134,18 @@ struct clk_divider rate_##_name = { \
- } \
- };
-
-+#define PERIPH_PM_CPU(_name, _shift1, _reg, _shift2) \
-+struct clk_pm_cpu muxrate_##_name = { \
-+ .reg_mux = (void *)TBG_SEL, \
-+ .mask_mux = 3, \
-+ .shift_mux = _shift1, \
-+ .reg_div = (void *)_reg, \
-+ .shift_div = _shift2, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_pm_cpu_ops, \
-+ } \
-+};
-+
- #define PERIPH_CLK_FULL_DD(_name, _bit, _shift, _reg1, _reg2, _shift1, _shift2)\
- static PERIPH_GATE(_name, _bit); \
- static PERIPH_MUX(_name, _shift); \
-@@ -136,10 +160,6 @@ static PERIPH_DIV(_name, _reg, _shift1,
- static PERIPH_GATE(_name, _bit); \
- static PERIPH_DIV(_name, _reg, _shift, _table);
-
--#define PERIPH_CLK_MUX_DIV(_name, _shift, _reg, _shift_div, _table) \
--static PERIPH_MUX(_name, _shift); \
--static PERIPH_DIV(_name, _reg, _shift_div, _table);
--
- #define PERIPH_CLK_MUX_DD(_name, _shift, _reg1, _reg2, _shift1, _shift2)\
- static PERIPH_MUX(_name, _shift); \
- static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2);
-@@ -180,13 +200,12 @@ static PERIPH_DOUBLEDIV(_name, _reg1, _r
- .rate_hw = &rate_##_name.hw, \
- }
-
--#define REF_CLK_MUX_DIV(_name) \
-+#define REF_CLK_PM_CPU(_name) \
- { .name = #_name, \
- .parent_names = (const char *[]){ "TBG-A-P", \
- "TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
- .num_parents = 4, \
-- .mux_hw = &mux_##_name.hw, \
-- .rate_hw = &rate_##_name.hw, \
-+ .muxrate_hw = &muxrate_##_name.hw, \
- }
-
- #define REF_CLK_MUX_DD(_name) \
-@@ -216,7 +235,7 @@ PERIPH_CLK_FULL_DD(ddr_fclk, 21, 16, DIV
- PERIPH_CLK_FULL(trace, 22, 18, DIV_SEL0, 20, clk_table6);
- PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL0, 23, clk_table6);
- PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19);
--PERIPH_CLK_MUX_DIV(cpu, 22, DIV_SEL0, 28, clk_table6);
-+static PERIPH_PM_CPU(cpu, 22, DIV_SEL0, 28);
-
- static struct clk_periph_data data_nb[] = {
- REF_CLK_FULL_DD(mmc),
-@@ -235,7 +254,7 @@ static struct clk_periph_data data_nb[]
- REF_CLK_FULL(trace),
- REF_CLK_FULL(counter),
- REF_CLK_FULL_DD(eip97),
-- REF_CLK_MUX_DIV(cpu),
-+ REF_CLK_PM_CPU(cpu),
- { },
- };
-
-@@ -297,6 +316,37 @@ static const struct clk_ops clk_double_d
- .recalc_rate = clk_double_div_recalc_rate,
- };
-
-+static u8 clk_pm_cpu_get_parent(struct clk_hw *hw)
-+{
-+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
-+ int num_parents = clk_hw_get_num_parents(hw);
-+ u32 val;
-+
-+ val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux;
-+ val &= pm_cpu->mask_mux;
-+
-+ if (val >= num_parents)
-+ return -EINVAL;
-+
-+ return val;
-+}
-+
-+static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
-+ unsigned int div;
-+
-+ div = get_div(pm_cpu->reg_div, pm_cpu->shift_div);
-+
-+ return DIV_ROUND_UP_ULL((u64)parent_rate, div);
-+}
-+
-+static const struct clk_ops clk_pm_cpu_ops = {
-+ .get_parent = clk_pm_cpu_get_parent,
-+ .recalc_rate = clk_pm_cpu_recalc_rate,
-+};
-+
- static const struct of_device_id armada_3700_periph_clock_of_match[] = {
- { .compatible = "marvell,armada-3700-periph-clock-nb",
- .data = data_nb, },
-@@ -356,6 +406,20 @@ static int armada_3700_add_composite_clk
- }
- }
-
-+ if (data->muxrate_hw) {
-+ struct clk_pm_cpu *pmcpu_clk;
-+ struct clk_hw *muxrate_hw = data->muxrate_hw;
-+
-+ pmcpu_clk = to_clk_pm_cpu(muxrate_hw);
-+ pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux;
-+ pmcpu_clk->reg_div = reg + (u64)pmcpu_clk->reg_div;
-+
-+ mux_hw = muxrate_hw;
-+ rate_hw = muxrate_hw;
-+ mux_ops = muxrate_hw->init->ops;
-+ rate_ops = muxrate_hw->init->ops;
-+ }
-+
- *hw = clk_hw_register_composite(dev, data->name, data->parent_names,
- data->num_parents, mux_hw,
- mux_ops, rate_hw, rate_ops,
--- /dev/null
+From dd7aa8d4b53b3484ba31ba56f3ff1be7deb38530 Mon Sep 17 00:00:00 2001
+From: Maxime Chevallier <maxime.chevallier@smile.fr>
+Date: Tue, 10 Oct 2017 10:43:18 +0200
+Subject: spi: a3700: Change SPI mode before asserting chip-select
+
+The spi device mode should be configured in the controller before the
+chip-select is asserted, so that a clock polarity configuration change
+is not interpreted as a clock tick by the device.
+
+This patch moves the mode setting to the 'prepare_message' function
+instead of the 'transfer_one' function.
+
+By doing so, this patch also removes redundant code in
+a3700_spi_clock_set.
+
+This was tested on EspressoBin board, with spidev.
+
+Signed-off-by: Maxime Chevallier <maxime.chevallier@smile.fr>
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ drivers/spi/spi-armada-3700.c | 17 ++++-------------
+ 1 file changed, 4 insertions(+), 13 deletions(-)
+
+--- a/drivers/spi/spi-armada-3700.c
++++ b/drivers/spi/spi-armada-3700.c
+@@ -214,7 +214,7 @@ static void a3700_spi_mode_set(struct a3
+ }
+
+ static void a3700_spi_clock_set(struct a3700_spi *a3700_spi,
+- unsigned int speed_hz, u16 mode)
++ unsigned int speed_hz)
+ {
+ u32 val;
+ u32 prescale;
+@@ -239,17 +239,6 @@ static void a3700_spi_clock_set(struct a
+ val |= A3700_SPI_CLK_CAPT_EDGE;
+ spireg_write(a3700_spi, A3700_SPI_IF_TIME_REG, val);
+ }
+-
+- val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
+- val &= ~(A3700_SPI_CLK_POL | A3700_SPI_CLK_PHA);
+-
+- if (mode & SPI_CPOL)
+- val |= A3700_SPI_CLK_POL;
+-
+- if (mode & SPI_CPHA)
+- val |= A3700_SPI_CLK_PHA;
+-
+- spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
+ }
+
+ static void a3700_spi_bytelen_set(struct a3700_spi *a3700_spi, unsigned int len)
+@@ -431,7 +420,7 @@ static void a3700_spi_transfer_setup(str
+
+ a3700_spi = spi_master_get_devdata(spi->master);
+
+- a3700_spi_clock_set(a3700_spi, xfer->speed_hz, spi->mode);
++ a3700_spi_clock_set(a3700_spi, xfer->speed_hz);
+
+ byte_len = xfer->bits_per_word >> 3;
+
+@@ -592,6 +581,8 @@ static int a3700_spi_prepare_message(str
+
+ a3700_spi_bytelen_set(a3700_spi, 4);
+
++ a3700_spi_mode_set(a3700_spi, spi->mode);
++
+ return 0;
+ }
+
--- /dev/null
+From 2ff0d0b5bb397c3dc5c9b97bd0f20948f0b77740 Mon Sep 17 00:00:00 2001
+From: Miquel Raynal <miquel.raynal@free-electrons.com>
+Date: Fri, 13 Oct 2017 11:01:57 +0200
+Subject: arm64: dts: marvell: armada-37xx: add UART clock
+
+Add the missing clock property to armada-3700 UART node.
+
+This clock will be used to derive the prescaler value to comply with
+the requested baudrate.
+
+Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
+Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+---
+ arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
++++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+@@ -135,6 +135,7 @@
+ uart0: serial@12000 {
+ compatible = "marvell,armada-3700-uart";
+ reg = <0x12000 0x200>;
++ clocks = <&xtalclk>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+++ /dev/null
-From 2089dc33ea0e3917465929d4020fbff3d6dbf7f4 Mon Sep 17 00:00:00 2001
-From: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Date: Thu, 30 Nov 2017 14:40:29 +0100
-Subject: clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks
-
-When DVFS is enabled the CPU clock setting is done using an other set of
-registers.
-
-These Power Management registers are exposed through a syscon as they
-will also be used by other drivers such as the cpufreq.
-
-This patch add the possibility to modify the CPU frequency using the
-associate load level matching the target frequency. Then all the
-frequency switch is handle by the hardware.
-
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-[sboyd@codeaurora.org: Grow a local variable for regmap pointer
-to keep lines shorter]
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/mvebu/armada-37xx-periph.c | 221 ++++++++++++++++++++++++++++++++-
- 1 file changed, 217 insertions(+), 4 deletions(-)
-
---- a/drivers/clk/mvebu/armada-37xx-periph.c
-+++ b/drivers/clk/mvebu/armada-37xx-periph.c
-@@ -21,9 +21,11 @@
- */
-
- #include <linux/clk-provider.h>
-+#include <linux/mfd/syscon.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
- #include <linux/platform_device.h>
-+#include <linux/regmap.h>
- #include <linux/slab.h>
-
- #define TBG_SEL 0x0
-@@ -33,6 +35,26 @@
- #define CLK_SEL 0x10
- #define CLK_DIS 0x14
-
-+#define LOAD_LEVEL_NR 4
-+
-+#define ARMADA_37XX_NB_L0L1 0x18
-+#define ARMADA_37XX_NB_L2L3 0x1C
-+#define ARMADA_37XX_NB_TBG_DIV_OFF 13
-+#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7
-+#define ARMADA_37XX_NB_CLK_SEL_OFF 11
-+#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1
-+#define ARMADA_37XX_NB_TBG_SEL_OFF 9
-+#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3
-+#define ARMADA_37XX_NB_CONFIG_SHIFT 16
-+#define ARMADA_37XX_NB_DYN_MOD 0x24
-+#define ARMADA_37XX_NB_DFS_EN 31
-+#define ARMADA_37XX_NB_CPU_LOAD 0x30
-+#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3
-+#define ARMADA_37XX_DVFS_LOAD_0 0
-+#define ARMADA_37XX_DVFS_LOAD_1 1
-+#define ARMADA_37XX_DVFS_LOAD_2 2
-+#define ARMADA_37XX_DVFS_LOAD_3 3
-+
- struct clk_periph_driver_data {
- struct clk_hw_onecell_data *hw_data;
- spinlock_t lock;
-@@ -53,6 +75,7 @@ struct clk_pm_cpu {
- u32 mask_mux;
- void __iomem *reg_div;
- u8 shift_div;
-+ struct regmap *nb_pm_base;
- };
-
- #define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw)
-@@ -316,14 +339,94 @@ static const struct clk_ops clk_double_d
- .recalc_rate = clk_double_div_recalc_rate,
- };
-
-+static void armada_3700_pm_dvfs_update_regs(unsigned int load_level,
-+ unsigned int *reg,
-+ unsigned int *offset)
-+{
-+ if (load_level <= ARMADA_37XX_DVFS_LOAD_1)
-+ *reg = ARMADA_37XX_NB_L0L1;
-+ else
-+ *reg = ARMADA_37XX_NB_L2L3;
-+
-+ if (load_level == ARMADA_37XX_DVFS_LOAD_0 ||
-+ load_level == ARMADA_37XX_DVFS_LOAD_2)
-+ *offset += ARMADA_37XX_NB_CONFIG_SHIFT;
-+}
-+
-+static bool armada_3700_pm_dvfs_is_enabled(struct regmap *base)
-+{
-+ unsigned int val, reg = ARMADA_37XX_NB_DYN_MOD;
-+
-+ if (IS_ERR(base))
-+ return false;
-+
-+ regmap_read(base, reg, &val);
-+
-+ return !!(val & BIT(ARMADA_37XX_NB_DFS_EN));
-+}
-+
-+static unsigned int armada_3700_pm_dvfs_get_cpu_div(struct regmap *base)
-+{
-+ unsigned int reg = ARMADA_37XX_NB_CPU_LOAD;
-+ unsigned int offset = ARMADA_37XX_NB_TBG_DIV_OFF;
-+ unsigned int load_level, div;
-+
-+ /*
-+ * This function is always called after the function
-+ * armada_3700_pm_dvfs_is_enabled, so no need to check again
-+ * if the base is valid.
-+ */
-+ regmap_read(base, reg, &load_level);
-+
-+ /*
-+ * The register and the offset inside this register accessed to
-+ * read the current divider depend on the load level
-+ */
-+ load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
-+ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset);
-+
-+ regmap_read(base, reg, &div);
-+
-+ return (div >> offset) & ARMADA_37XX_NB_TBG_DIV_MASK;
-+}
-+
-+static unsigned int armada_3700_pm_dvfs_get_cpu_parent(struct regmap *base)
-+{
-+ unsigned int reg = ARMADA_37XX_NB_CPU_LOAD;
-+ unsigned int offset = ARMADA_37XX_NB_TBG_SEL_OFF;
-+ unsigned int load_level, sel;
-+
-+ /*
-+ * This function is always called after the function
-+ * armada_3700_pm_dvfs_is_enabled, so no need to check again
-+ * if the base is valid
-+ */
-+ regmap_read(base, reg, &load_level);
-+
-+ /*
-+ * The register and the offset inside this register accessed to
-+ * read the current divider depend on the load level
-+ */
-+ load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
-+ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset);
-+
-+ regmap_read(base, reg, &sel);
-+
-+ return (sel >> offset) & ARMADA_37XX_NB_TBG_SEL_MASK;
-+}
-+
- static u8 clk_pm_cpu_get_parent(struct clk_hw *hw)
- {
- struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
- int num_parents = clk_hw_get_num_parents(hw);
- u32 val;
-
-- val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux;
-- val &= pm_cpu->mask_mux;
-+ if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) {
-+ val = armada_3700_pm_dvfs_get_cpu_parent(pm_cpu->nb_pm_base);
-+ } else {
-+ val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux;
-+ val &= pm_cpu->mask_mux;
-+ }
-
- if (val >= num_parents)
- return -EINVAL;
-@@ -331,19 +434,124 @@ static u8 clk_pm_cpu_get_parent(struct c
- return val;
- }
-
-+static int clk_pm_cpu_set_parent(struct clk_hw *hw, u8 index)
-+{
-+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
-+ struct regmap *base = pm_cpu->nb_pm_base;
-+ int load_level;
-+
-+ /*
-+ * We set the clock parent only if the DVFS is available but
-+ * not enabled.
-+ */
-+ if (IS_ERR(base) || armada_3700_pm_dvfs_is_enabled(base))
-+ return -EINVAL;
-+
-+ /* Set the parent clock for all the load level */
-+ for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
-+ unsigned int reg, mask, val,
-+ offset = ARMADA_37XX_NB_TBG_SEL_OFF;
-+
-+ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset);
-+
-+ val = index << offset;
-+ mask = ARMADA_37XX_NB_TBG_SEL_MASK << offset;
-+ regmap_update_bits(base, reg, mask, val);
-+ }
-+ return 0;
-+}
-+
- static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
- {
- struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
- unsigned int div;
-
-- div = get_div(pm_cpu->reg_div, pm_cpu->shift_div);
--
-+ if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base))
-+ div = armada_3700_pm_dvfs_get_cpu_div(pm_cpu->nb_pm_base);
-+ else
-+ div = get_div(pm_cpu->reg_div, pm_cpu->shift_div);
- return DIV_ROUND_UP_ULL((u64)parent_rate, div);
- }
-
-+static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long *parent_rate)
-+{
-+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
-+ struct regmap *base = pm_cpu->nb_pm_base;
-+ unsigned int div = *parent_rate / rate;
-+ unsigned int load_level;
-+ /* only available when DVFS is enabled */
-+ if (!armada_3700_pm_dvfs_is_enabled(base))
-+ return -EINVAL;
-+
-+ for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
-+ unsigned int reg, val, offset = ARMADA_37XX_NB_TBG_DIV_OFF;
-+
-+ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset);
-+
-+ regmap_read(base, reg, &val);
-+
-+ val >>= offset;
-+ val &= ARMADA_37XX_NB_TBG_DIV_MASK;
-+ if (val == div)
-+ /*
-+ * We found a load level matching the target
-+ * divider, switch to this load level and
-+ * return.
-+ */
-+ return *parent_rate / div;
-+ }
-+
-+ /* We didn't find any valid divider */
-+ return -EINVAL;
-+}
-+
-+static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long parent_rate)
-+{
-+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
-+ struct regmap *base = pm_cpu->nb_pm_base;
-+ unsigned int div = parent_rate / rate;
-+ unsigned int load_level;
-+
-+ /* only available when DVFS is enabled */
-+ if (!armada_3700_pm_dvfs_is_enabled(base))
-+ return -EINVAL;
-+
-+ for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
-+ unsigned int reg, mask, val,
-+ offset = ARMADA_37XX_NB_TBG_DIV_OFF;
-+
-+ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset);
-+
-+ regmap_read(base, reg, &val);
-+ val >>= offset;
-+ val &= ARMADA_37XX_NB_TBG_DIV_MASK;
-+
-+ if (val == div) {
-+ /*
-+ * We found a load level matching the target
-+ * divider, switch to this load level and
-+ * return.
-+ */
-+ reg = ARMADA_37XX_NB_CPU_LOAD;
-+ mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
-+ regmap_update_bits(base, reg, mask, load_level);
-+
-+ return rate;
-+ }
-+ }
-+
-+ /* We didn't find any valid divider */
-+ return -EINVAL;
-+}
-+
- static const struct clk_ops clk_pm_cpu_ops = {
- .get_parent = clk_pm_cpu_get_parent,
-+ .set_parent = clk_pm_cpu_set_parent,
-+ .round_rate = clk_pm_cpu_round_rate,
-+ .set_rate = clk_pm_cpu_set_rate,
- .recalc_rate = clk_pm_cpu_recalc_rate,
- };
-
-@@ -409,6 +617,7 @@ static int armada_3700_add_composite_clk
- if (data->muxrate_hw) {
- struct clk_pm_cpu *pmcpu_clk;
- struct clk_hw *muxrate_hw = data->muxrate_hw;
-+ struct regmap *map;
-
- pmcpu_clk = to_clk_pm_cpu(muxrate_hw);
- pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux;
-@@ -418,6 +627,10 @@ static int armada_3700_add_composite_clk
- rate_hw = muxrate_hw;
- mux_ops = muxrate_hw->init->ops;
- rate_ops = muxrate_hw->init->ops;
-+
-+ map = syscon_regmap_lookup_by_compatible(
-+ "marvell,armada-3700-nb-pm");
-+ pmcpu_clk->nb_pm_base = map;
- }
-
- *hw = clk_hw_register_composite(dev, data->name, data->parent_names,
--- /dev/null
+From adf4e289dd7f801c3fe12e0e6b491e11e548cd3d Mon Sep 17 00:00:00 2001
+From: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Date: Thu, 30 Nov 2017 14:40:27 +0100
+Subject: clk: mvebu: armada-37xx-periph: cosmetic changes
+
+This patches fixes few cosmetic issues such as alignment, blank lines
+and required space.
+
+Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/mvebu/armada-37xx-periph.c | 17 +++++++++--------
+ 1 file changed, 9 insertions(+), 8 deletions(-)
+
+--- a/drivers/clk/mvebu/armada-37xx-periph.c
++++ b/drivers/clk/mvebu/armada-37xx-periph.c
+@@ -79,6 +79,7 @@ static const struct clk_div_table clk_ta
+ { .val = 1, .div = 4, },
+ { .val = 0, .div = 0, }, /* last entry */
+ };
++
+ static const struct clk_ops clk_double_div_ops;
+
+ #define PERIPH_GATE(_name, _bit) \
+@@ -217,7 +218,7 @@ PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL
+ PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19);
+ PERIPH_CLK_MUX_DIV(cpu, 22, DIV_SEL0, 28, clk_table6);
+
+-static struct clk_periph_data data_nb[] ={
++static struct clk_periph_data data_nb[] = {
+ REF_CLK_FULL_DD(mmc),
+ REF_CLK_FULL_DD(sata_host),
+ REF_CLK_FULL_DD(sec_at),
+@@ -281,7 +282,7 @@ static unsigned int get_div(void __iomem
+ }
+
+ static unsigned long clk_double_div_recalc_rate(struct clk_hw *hw,
+- unsigned long parent_rate)
++ unsigned long parent_rate)
+ {
+ struct clk_double_div *double_div = to_clk_double_div(hw);
+ unsigned int div;
+@@ -303,6 +304,7 @@ static const struct of_device_id armada_
+ .data = data_sb, },
+ { }
+ };
++
+ static int armada_3700_add_composite_clk(const struct clk_periph_data *data,
+ void __iomem *reg, spinlock_t *lock,
+ struct device *dev, struct clk_hw **hw)
+@@ -355,9 +357,9 @@ static int armada_3700_add_composite_clk
+ }
+
+ *hw = clk_hw_register_composite(dev, data->name, data->parent_names,
+- data->num_parents, mux_hw,
+- mux_ops, rate_hw, rate_ops,
+- gate_hw, gate_ops, CLK_IGNORE_UNUSED);
++ data->num_parents, mux_hw,
++ mux_ops, rate_hw, rate_ops,
++ gate_hw, gate_ops, CLK_IGNORE_UNUSED);
+
+ if (IS_ERR(*hw))
+ return PTR_ERR(*hw);
+@@ -406,12 +408,11 @@ static int armada_3700_periph_clock_prob
+ if (armada_3700_add_composite_clk(&data[i], reg,
+ &driver_data->lock, dev, hw))
+ dev_err(dev, "Can't register periph clock %s\n",
+- data[i].name);
+-
++ data[i].name);
+ }
+
+ ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
+- driver_data->hw_data);
++ driver_data->hw_data);
+ if (ret) {
+ for (i = 0; i < num_periph; i++)
+ clk_hw_unregister(driver_data->hw_data->hws[i]);
+++ /dev/null
-From 92ce45fb875d7c3e021cc454482fe0687ff54f29 Mon Sep 17 00:00:00 2001
-From: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Date: Thu, 14 Dec 2017 16:00:05 +0100
-Subject: cpufreq: Add DVFS support for Armada 37xx
-
-This patch adds DVFS support for the Armada 37xx SoCs
-
-There are up to four CPU frequency loads for Armada 37xx controlled by
-the hardware.
-
-This driver associates the CPU load level to a frequency, then the
-hardware will switch while selecting a load level.
-
-The hardware also can associate a voltage for each level (AVS support)
-but it is not yet supported
-
-Tested-by: Andre Heider <a.heider@gmail.com>
-Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/cpufreq/Kconfig.arm | 7 +
- drivers/cpufreq/Makefile | 1 +
- drivers/cpufreq/armada-37xx-cpufreq.c | 241 ++++++++++++++++++++++++++++++++++
- 3 files changed, 249 insertions(+)
- create mode 100644 drivers/cpufreq/armada-37xx-cpufreq.c
-
---- a/drivers/cpufreq/Kconfig.arm
-+++ b/drivers/cpufreq/Kconfig.arm
-@@ -2,6 +2,13 @@
- # ARM CPU Frequency scaling drivers
- #
-
-+config ARM_ARMADA_37XX_CPUFREQ
-+ tristate "Armada 37xx CPUFreq support"
-+ depends on ARCH_MVEBU
-+ help
-+ This adds the CPUFreq driver support for Marvell Armada 37xx SoCs.
-+ The Armada 37xx PMU supports 4 frequency and VDD levels.
-+
- # big LITTLE core layer and glue drivers
- config ARM_BIG_LITTLE_CPUFREQ
- tristate "Generic ARM big LITTLE CPUfreq driver"
---- a/drivers/cpufreq/Makefile
-+++ b/drivers/cpufreq/Makefile
-@@ -52,6 +52,7 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) +=
- # LITTLE drivers, so that it is probed last.
- obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
-
-+obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o
- obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o
- obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
- obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
---- /dev/null
-+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
-@@ -0,0 +1,241 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * CPU frequency scaling support for Armada 37xx platform.
-+ *
-+ * Copyright (C) 2017 Marvell
-+ *
-+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/cpu.h>
-+#include <linux/cpufreq.h>
-+#include <linux/err.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/module.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_opp.h>
-+#include <linux/regmap.h>
-+#include <linux/slab.h>
-+
-+/* Power management in North Bridge register set */
-+#define ARMADA_37XX_NB_L0L1 0x18
-+#define ARMADA_37XX_NB_L2L3 0x1C
-+#define ARMADA_37XX_NB_TBG_DIV_OFF 13
-+#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7
-+#define ARMADA_37XX_NB_CLK_SEL_OFF 11
-+#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1
-+#define ARMADA_37XX_NB_CLK_SEL_TBG 0x1
-+#define ARMADA_37XX_NB_TBG_SEL_OFF 9
-+#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3
-+#define ARMADA_37XX_NB_VDD_SEL_OFF 6
-+#define ARMADA_37XX_NB_VDD_SEL_MASK 0x3
-+#define ARMADA_37XX_NB_CONFIG_SHIFT 16
-+#define ARMADA_37XX_NB_DYN_MOD 0x24
-+#define ARMADA_37XX_NB_CLK_SEL_EN BIT(26)
-+#define ARMADA_37XX_NB_TBG_EN BIT(28)
-+#define ARMADA_37XX_NB_DIV_EN BIT(29)
-+#define ARMADA_37XX_NB_VDD_EN BIT(30)
-+#define ARMADA_37XX_NB_DFS_EN BIT(31)
-+#define ARMADA_37XX_NB_CPU_LOAD 0x30
-+#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3
-+#define ARMADA_37XX_DVFS_LOAD_0 0
-+#define ARMADA_37XX_DVFS_LOAD_1 1
-+#define ARMADA_37XX_DVFS_LOAD_2 2
-+#define ARMADA_37XX_DVFS_LOAD_3 3
-+
-+/*
-+ * On Armada 37xx the Power management manages 4 level of CPU load,
-+ * each level can be associated with a CPU clock source, a CPU
-+ * divider, a VDD level, etc...
-+ */
-+#define LOAD_LEVEL_NR 4
-+
-+struct armada_37xx_dvfs {
-+ u32 cpu_freq_max;
-+ u8 divider[LOAD_LEVEL_NR];
-+};
-+
-+static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
-+ {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} },
-+ {.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} },
-+ {.cpu_freq_max = 800*1000*1000, .divider = {1, 2, 3, 4} },
-+ {.cpu_freq_max = 600*1000*1000, .divider = {2, 4, 5, 6} },
-+};
-+
-+static struct armada_37xx_dvfs *armada_37xx_cpu_freq_info_get(u32 freq)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(armada_37xx_dvfs); i++) {
-+ if (freq == armada_37xx_dvfs[i].cpu_freq_max)
-+ return &armada_37xx_dvfs[i];
-+ }
-+
-+ pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000);
-+ return NULL;
-+}
-+
-+/*
-+ * Setup the four level managed by the hardware. Once the four level
-+ * will be configured then the DVFS will be enabled.
-+ */
-+static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
-+ struct clk *clk, u8 *divider)
-+{
-+ int load_lvl;
-+ struct clk *parent;
-+
-+ for (load_lvl = 0; load_lvl < LOAD_LEVEL_NR; load_lvl++) {
-+ unsigned int reg, mask, val, offset = 0;
-+
-+ if (load_lvl <= ARMADA_37XX_DVFS_LOAD_1)
-+ reg = ARMADA_37XX_NB_L0L1;
-+ else
-+ reg = ARMADA_37XX_NB_L2L3;
-+
-+ if (load_lvl == ARMADA_37XX_DVFS_LOAD_0 ||
-+ load_lvl == ARMADA_37XX_DVFS_LOAD_2)
-+ offset += ARMADA_37XX_NB_CONFIG_SHIFT;
-+
-+ /* Set cpu clock source, for all the level we use TBG */
-+ val = ARMADA_37XX_NB_CLK_SEL_TBG << ARMADA_37XX_NB_CLK_SEL_OFF;
-+ mask = (ARMADA_37XX_NB_CLK_SEL_MASK
-+ << ARMADA_37XX_NB_CLK_SEL_OFF);
-+
-+ /*
-+ * Set cpu divider based on the pre-computed array in
-+ * order to have balanced step.
-+ */
-+ val |= divider[load_lvl] << ARMADA_37XX_NB_TBG_DIV_OFF;
-+ mask |= (ARMADA_37XX_NB_TBG_DIV_MASK
-+ << ARMADA_37XX_NB_TBG_DIV_OFF);
-+
-+ /* Set VDD divider which is actually the load level. */
-+ val |= load_lvl << ARMADA_37XX_NB_VDD_SEL_OFF;
-+ mask |= (ARMADA_37XX_NB_VDD_SEL_MASK
-+ << ARMADA_37XX_NB_VDD_SEL_OFF);
-+
-+ val <<= offset;
-+ mask <<= offset;
-+
-+ regmap_update_bits(base, reg, mask, val);
-+ }
-+
-+ /*
-+ * Set cpu clock source, for all the level we keep the same
-+ * clock source that the one already configured. For this one
-+ * we need to use the clock framework
-+ */
-+ parent = clk_get_parent(clk);
-+ clk_set_parent(clk, parent);
-+}
-+
-+static void __init armada37xx_cpufreq_disable_dvfs(struct regmap *base)
-+{
-+ unsigned int reg = ARMADA_37XX_NB_DYN_MOD,
-+ mask = ARMADA_37XX_NB_DFS_EN;
-+
-+ regmap_update_bits(base, reg, mask, 0);
-+}
-+
-+static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base)
-+{
-+ unsigned int val, reg = ARMADA_37XX_NB_CPU_LOAD,
-+ mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
-+
-+ /* Start with the highest load (0) */
-+ val = ARMADA_37XX_DVFS_LOAD_0;
-+ regmap_update_bits(base, reg, mask, val);
-+
-+ /* Now enable DVFS for the CPUs */
-+ reg = ARMADA_37XX_NB_DYN_MOD;
-+ mask = ARMADA_37XX_NB_CLK_SEL_EN | ARMADA_37XX_NB_TBG_EN |
-+ ARMADA_37XX_NB_DIV_EN | ARMADA_37XX_NB_VDD_EN |
-+ ARMADA_37XX_NB_DFS_EN;
-+
-+ regmap_update_bits(base, reg, mask, mask);
-+}
-+
-+static int __init armada37xx_cpufreq_driver_init(void)
-+{
-+ struct armada_37xx_dvfs *dvfs;
-+ struct platform_device *pdev;
-+ unsigned int cur_frequency;
-+ struct regmap *nb_pm_base;
-+ struct device *cpu_dev;
-+ int load_lvl, ret;
-+ struct clk *clk;
-+
-+ nb_pm_base =
-+ syscon_regmap_lookup_by_compatible("marvell,armada-3700-nb-pm");
-+
-+ if (IS_ERR(nb_pm_base))
-+ return -ENODEV;
-+
-+ /* Before doing any configuration on the DVFS first, disable it */
-+ armada37xx_cpufreq_disable_dvfs(nb_pm_base);
-+
-+ /*
-+ * On CPU 0 register the operating points supported (which are
-+ * the nominal CPU frequency and full integer divisions of
-+ * it).
-+ */
-+ cpu_dev = get_cpu_device(0);
-+ if (!cpu_dev) {
-+ dev_err(cpu_dev, "Cannot get CPU\n");
-+ return -ENODEV;
-+ }
-+
-+ clk = clk_get(cpu_dev, 0);
-+ if (IS_ERR(clk)) {
-+ dev_err(cpu_dev, "Cannot get clock for CPU0\n");
-+ return PTR_ERR(clk);
-+ }
-+
-+ /* Get nominal (current) CPU frequency */
-+ cur_frequency = clk_get_rate(clk);
-+ if (!cur_frequency) {
-+ dev_err(cpu_dev, "Failed to get clock rate for CPU\n");
-+ return -EINVAL;
-+ }
-+
-+ dvfs = armada_37xx_cpu_freq_info_get(cur_frequency);
-+ if (!dvfs)
-+ return -EINVAL;
-+
-+ armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
-+
-+ for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
-+ load_lvl++) {
-+ unsigned long freq = cur_frequency / dvfs->divider[load_lvl];
-+
-+ ret = dev_pm_opp_add(cpu_dev, freq, 0);
-+ if (ret) {
-+ /* clean-up the already added opp before leaving */
-+ while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) {
-+ freq = cur_frequency / dvfs->divider[load_lvl];
-+ dev_pm_opp_remove(cpu_dev, freq);
-+ }
-+ return ret;
-+ }
-+ }
-+
-+ /* Now that everything is setup, enable the DVFS at hardware level */
-+ armada37xx_cpufreq_enable_dvfs(nb_pm_base);
-+
-+ pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-+
-+ return PTR_ERR_OR_ZERO(pdev);
-+}
-+/* late_initcall, to guarantee the driver is loaded after A37xx clock driver */
-+late_initcall(armada37xx_cpufreq_driver_init);
-+
-+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
-+MODULE_DESCRIPTION("Armada 37xx cpufreq driver");
-+MODULE_LICENSE("GPL");
--- /dev/null
+From 9818a7a4fd10f72537cdf2a5ec3402f2c245ea24 Mon Sep 17 00:00:00 2001
+From: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Date: Thu, 30 Nov 2017 14:40:28 +0100
+Subject: clk: mvebu: armada-37xx-periph: prepare cpu clk to be
+ used with DVFS
+
+When DVFS will be enabled then the cpu clk will use a different set of
+register at run time. That means that we won't be able to use the common
+callback and need to use our own ones.
+
+This patch prepares this change by switching on our own set of callbacks
+without modifying the behavior of the clocks.
+
+Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/mvebu/armada-37xx-periph.c | 82 ++++++++++++++++++++++++++++++----
+ 1 file changed, 73 insertions(+), 9 deletions(-)
+
+--- a/drivers/clk/mvebu/armada-37xx-periph.c
++++ b/drivers/clk/mvebu/armada-37xx-periph.c
+@@ -46,7 +46,17 @@ struct clk_double_div {
+ u8 shift2;
+ };
+
++struct clk_pm_cpu {
++ struct clk_hw hw;
++ void __iomem *reg_mux;
++ u8 shift_mux;
++ u32 mask_mux;
++ void __iomem *reg_div;
++ u8 shift_div;
++};
++
+ #define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw)
++#define to_clk_pm_cpu(_hw) container_of(_hw, struct clk_pm_cpu, hw)
+
+ struct clk_periph_data {
+ const char *name;
+@@ -55,6 +65,7 @@ struct clk_periph_data {
+ struct clk_hw *mux_hw;
+ struct clk_hw *rate_hw;
+ struct clk_hw *gate_hw;
++ struct clk_hw *muxrate_hw;
+ bool is_double_div;
+ };
+
+@@ -81,6 +92,7 @@ static const struct clk_div_table clk_ta
+ };
+
+ static const struct clk_ops clk_double_div_ops;
++static const struct clk_ops clk_pm_cpu_ops;
+
+ #define PERIPH_GATE(_name, _bit) \
+ struct clk_gate gate_##_name = { \
+@@ -122,6 +134,18 @@ struct clk_divider rate_##_name = { \
+ } \
+ };
+
++#define PERIPH_PM_CPU(_name, _shift1, _reg, _shift2) \
++struct clk_pm_cpu muxrate_##_name = { \
++ .reg_mux = (void *)TBG_SEL, \
++ .mask_mux = 3, \
++ .shift_mux = _shift1, \
++ .reg_div = (void *)_reg, \
++ .shift_div = _shift2, \
++ .hw.init = &(struct clk_init_data){ \
++ .ops = &clk_pm_cpu_ops, \
++ } \
++};
++
+ #define PERIPH_CLK_FULL_DD(_name, _bit, _shift, _reg1, _reg2, _shift1, _shift2)\
+ static PERIPH_GATE(_name, _bit); \
+ static PERIPH_MUX(_name, _shift); \
+@@ -136,10 +160,6 @@ static PERIPH_DIV(_name, _reg, _shift1,
+ static PERIPH_GATE(_name, _bit); \
+ static PERIPH_DIV(_name, _reg, _shift, _table);
+
+-#define PERIPH_CLK_MUX_DIV(_name, _shift, _reg, _shift_div, _table) \
+-static PERIPH_MUX(_name, _shift); \
+-static PERIPH_DIV(_name, _reg, _shift_div, _table);
+-
+ #define PERIPH_CLK_MUX_DD(_name, _shift, _reg1, _reg2, _shift1, _shift2)\
+ static PERIPH_MUX(_name, _shift); \
+ static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2);
+@@ -180,13 +200,12 @@ static PERIPH_DOUBLEDIV(_name, _reg1, _r
+ .rate_hw = &rate_##_name.hw, \
+ }
+
+-#define REF_CLK_MUX_DIV(_name) \
++#define REF_CLK_PM_CPU(_name) \
+ { .name = #_name, \
+ .parent_names = (const char *[]){ "TBG-A-P", \
+ "TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
+ .num_parents = 4, \
+- .mux_hw = &mux_##_name.hw, \
+- .rate_hw = &rate_##_name.hw, \
++ .muxrate_hw = &muxrate_##_name.hw, \
+ }
+
+ #define REF_CLK_MUX_DD(_name) \
+@@ -216,7 +235,7 @@ PERIPH_CLK_FULL_DD(ddr_fclk, 21, 16, DIV
+ PERIPH_CLK_FULL(trace, 22, 18, DIV_SEL0, 20, clk_table6);
+ PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL0, 23, clk_table6);
+ PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19);
+-PERIPH_CLK_MUX_DIV(cpu, 22, DIV_SEL0, 28, clk_table6);
++static PERIPH_PM_CPU(cpu, 22, DIV_SEL0, 28);
+
+ static struct clk_periph_data data_nb[] = {
+ REF_CLK_FULL_DD(mmc),
+@@ -235,7 +254,7 @@ static struct clk_periph_data data_nb[]
+ REF_CLK_FULL(trace),
+ REF_CLK_FULL(counter),
+ REF_CLK_FULL_DD(eip97),
+- REF_CLK_MUX_DIV(cpu),
++ REF_CLK_PM_CPU(cpu),
+ { },
+ };
+
+@@ -297,6 +316,37 @@ static const struct clk_ops clk_double_d
+ .recalc_rate = clk_double_div_recalc_rate,
+ };
+
++static u8 clk_pm_cpu_get_parent(struct clk_hw *hw)
++{
++ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
++ int num_parents = clk_hw_get_num_parents(hw);
++ u32 val;
++
++ val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux;
++ val &= pm_cpu->mask_mux;
++
++ if (val >= num_parents)
++ return -EINVAL;
++
++ return val;
++}
++
++static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw,
++ unsigned long parent_rate)
++{
++ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
++ unsigned int div;
++
++ div = get_div(pm_cpu->reg_div, pm_cpu->shift_div);
++
++ return DIV_ROUND_UP_ULL((u64)parent_rate, div);
++}
++
++static const struct clk_ops clk_pm_cpu_ops = {
++ .get_parent = clk_pm_cpu_get_parent,
++ .recalc_rate = clk_pm_cpu_recalc_rate,
++};
++
+ static const struct of_device_id armada_3700_periph_clock_of_match[] = {
+ { .compatible = "marvell,armada-3700-periph-clock-nb",
+ .data = data_nb, },
+@@ -356,6 +406,20 @@ static int armada_3700_add_composite_clk
+ }
+ }
+
++ if (data->muxrate_hw) {
++ struct clk_pm_cpu *pmcpu_clk;
++ struct clk_hw *muxrate_hw = data->muxrate_hw;
++
++ pmcpu_clk = to_clk_pm_cpu(muxrate_hw);
++ pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux;
++ pmcpu_clk->reg_div = reg + (u64)pmcpu_clk->reg_div;
++
++ mux_hw = muxrate_hw;
++ rate_hw = muxrate_hw;
++ mux_ops = muxrate_hw->init->ops;
++ rate_ops = muxrate_hw->init->ops;
++ }
++
+ *hw = clk_hw_register_composite(dev, data->name, data->parent_names,
+ data->num_parents, mux_hw,
+ mux_ops, rate_hw, rate_ops,
+++ /dev/null
-From dd7aa8d4b53b3484ba31ba56f3ff1be7deb38530 Mon Sep 17 00:00:00 2001
-From: Maxime Chevallier <maxime.chevallier@smile.fr>
-Date: Tue, 10 Oct 2017 10:43:18 +0200
-Subject: spi: a3700: Change SPI mode before asserting chip-select
-
-The spi device mode should be configured in the controller before the
-chip-select is asserted, so that a clock polarity configuration change
-is not interpreted as a clock tick by the device.
-
-This patch moves the mode setting to the 'prepare_message' function
-instead of the 'transfer_one' function.
-
-By doing so, this patch also removes redundant code in
-a3700_spi_clock_set.
-
-This was tested on EspressoBin board, with spidev.
-
-Signed-off-by: Maxime Chevallier <maxime.chevallier@smile.fr>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-armada-3700.c | 17 ++++-------------
- 1 file changed, 4 insertions(+), 13 deletions(-)
-
---- a/drivers/spi/spi-armada-3700.c
-+++ b/drivers/spi/spi-armada-3700.c
-@@ -214,7 +214,7 @@ static void a3700_spi_mode_set(struct a3
- }
-
- static void a3700_spi_clock_set(struct a3700_spi *a3700_spi,
-- unsigned int speed_hz, u16 mode)
-+ unsigned int speed_hz)
- {
- u32 val;
- u32 prescale;
-@@ -239,17 +239,6 @@ static void a3700_spi_clock_set(struct a
- val |= A3700_SPI_CLK_CAPT_EDGE;
- spireg_write(a3700_spi, A3700_SPI_IF_TIME_REG, val);
- }
--
-- val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
-- val &= ~(A3700_SPI_CLK_POL | A3700_SPI_CLK_PHA);
--
-- if (mode & SPI_CPOL)
-- val |= A3700_SPI_CLK_POL;
--
-- if (mode & SPI_CPHA)
-- val |= A3700_SPI_CLK_PHA;
--
-- spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
- }
-
- static void a3700_spi_bytelen_set(struct a3700_spi *a3700_spi, unsigned int len)
-@@ -431,7 +420,7 @@ static void a3700_spi_transfer_setup(str
-
- a3700_spi = spi_master_get_devdata(spi->master);
-
-- a3700_spi_clock_set(a3700_spi, xfer->speed_hz, spi->mode);
-+ a3700_spi_clock_set(a3700_spi, xfer->speed_hz);
-
- byte_len = xfer->bits_per_word >> 3;
-
-@@ -592,6 +581,8 @@ static int a3700_spi_prepare_message(str
-
- a3700_spi_bytelen_set(a3700_spi, 4);
-
-+ a3700_spi_mode_set(a3700_spi, spi->mode);
-+
- return 0;
- }
-
+++ /dev/null
-From c737abc193d16e62e23e2fb585b8b7398ab380d8 Mon Sep 17 00:00:00 2001
-From: allen yan <yanwei@marvell.com>
-Date: Thu, 7 Sep 2017 15:04:53 +0200
-Subject: arm64: dts: marvell: Fix A37xx UART0 register size
-
-Armada-37xx UART0 registers are 0x200 bytes wide. Right next to them are
-the UART1 registers that should not be declared in this node.
-
-Update the example in DT bindings document accordingly.
-
-Signed-off-by: allen yan <yanwei@marvell.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
----
- Documentation/devicetree/bindings/serial/mvebu-uart.txt | 2 +-
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt
-+++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt
-@@ -8,6 +8,6 @@ Required properties:
- Example:
- serial@12000 {
- compatible = "marvell,armada-3700-uart";
-- reg = <0x12000 0x400>;
-+ reg = <0x12000 0x200>;
- interrupts = <43>;
- };
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -134,7 +134,7 @@
-
- uart0: serial@12000 {
- compatible = "marvell,armada-3700-uart";
-- reg = <0x12000 0x400>;
-+ reg = <0x12000 0x200>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
--- /dev/null
+From 2089dc33ea0e3917465929d4020fbff3d6dbf7f4 Mon Sep 17 00:00:00 2001
+From: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Date: Thu, 30 Nov 2017 14:40:29 +0100
+Subject: clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks
+
+When DVFS is enabled the CPU clock setting is done using an other set of
+registers.
+
+These Power Management registers are exposed through a syscon as they
+will also be used by other drivers such as the cpufreq.
+
+This patch add the possibility to modify the CPU frequency using the
+associate load level matching the target frequency. Then all the
+frequency switch is handle by the hardware.
+
+Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+[sboyd@codeaurora.org: Grow a local variable for regmap pointer
+to keep lines shorter]
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/mvebu/armada-37xx-periph.c | 221 ++++++++++++++++++++++++++++++++-
+ 1 file changed, 217 insertions(+), 4 deletions(-)
+
+--- a/drivers/clk/mvebu/armada-37xx-periph.c
++++ b/drivers/clk/mvebu/armada-37xx-periph.c
+@@ -21,9 +21,11 @@
+ */
+
+ #include <linux/clk-provider.h>
++#include <linux/mfd/syscon.h>
+ #include <linux/of.h>
+ #include <linux/of_device.h>
+ #include <linux/platform_device.h>
++#include <linux/regmap.h>
+ #include <linux/slab.h>
+
+ #define TBG_SEL 0x0
+@@ -33,6 +35,26 @@
+ #define CLK_SEL 0x10
+ #define CLK_DIS 0x14
+
++#define LOAD_LEVEL_NR 4
++
++#define ARMADA_37XX_NB_L0L1 0x18
++#define ARMADA_37XX_NB_L2L3 0x1C
++#define ARMADA_37XX_NB_TBG_DIV_OFF 13
++#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7
++#define ARMADA_37XX_NB_CLK_SEL_OFF 11
++#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1
++#define ARMADA_37XX_NB_TBG_SEL_OFF 9
++#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3
++#define ARMADA_37XX_NB_CONFIG_SHIFT 16
++#define ARMADA_37XX_NB_DYN_MOD 0x24
++#define ARMADA_37XX_NB_DFS_EN 31
++#define ARMADA_37XX_NB_CPU_LOAD 0x30
++#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3
++#define ARMADA_37XX_DVFS_LOAD_0 0
++#define ARMADA_37XX_DVFS_LOAD_1 1
++#define ARMADA_37XX_DVFS_LOAD_2 2
++#define ARMADA_37XX_DVFS_LOAD_3 3
++
+ struct clk_periph_driver_data {
+ struct clk_hw_onecell_data *hw_data;
+ spinlock_t lock;
+@@ -53,6 +75,7 @@ struct clk_pm_cpu {
+ u32 mask_mux;
+ void __iomem *reg_div;
+ u8 shift_div;
++ struct regmap *nb_pm_base;
+ };
+
+ #define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw)
+@@ -316,14 +339,94 @@ static const struct clk_ops clk_double_d
+ .recalc_rate = clk_double_div_recalc_rate,
+ };
+
++static void armada_3700_pm_dvfs_update_regs(unsigned int load_level,
++ unsigned int *reg,
++ unsigned int *offset)
++{
++ if (load_level <= ARMADA_37XX_DVFS_LOAD_1)
++ *reg = ARMADA_37XX_NB_L0L1;
++ else
++ *reg = ARMADA_37XX_NB_L2L3;
++
++ if (load_level == ARMADA_37XX_DVFS_LOAD_0 ||
++ load_level == ARMADA_37XX_DVFS_LOAD_2)
++ *offset += ARMADA_37XX_NB_CONFIG_SHIFT;
++}
++
++static bool armada_3700_pm_dvfs_is_enabled(struct regmap *base)
++{
++ unsigned int val, reg = ARMADA_37XX_NB_DYN_MOD;
++
++ if (IS_ERR(base))
++ return false;
++
++ regmap_read(base, reg, &val);
++
++ return !!(val & BIT(ARMADA_37XX_NB_DFS_EN));
++}
++
++static unsigned int armada_3700_pm_dvfs_get_cpu_div(struct regmap *base)
++{
++ unsigned int reg = ARMADA_37XX_NB_CPU_LOAD;
++ unsigned int offset = ARMADA_37XX_NB_TBG_DIV_OFF;
++ unsigned int load_level, div;
++
++ /*
++ * This function is always called after the function
++ * armada_3700_pm_dvfs_is_enabled, so no need to check again
++ * if the base is valid.
++ */
++ regmap_read(base, reg, &load_level);
++
++ /*
++ * The register and the offset inside this register accessed to
++ * read the current divider depend on the load level
++ */
++ load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
++ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset);
++
++ regmap_read(base, reg, &div);
++
++ return (div >> offset) & ARMADA_37XX_NB_TBG_DIV_MASK;
++}
++
++static unsigned int armada_3700_pm_dvfs_get_cpu_parent(struct regmap *base)
++{
++ unsigned int reg = ARMADA_37XX_NB_CPU_LOAD;
++ unsigned int offset = ARMADA_37XX_NB_TBG_SEL_OFF;
++ unsigned int load_level, sel;
++
++ /*
++ * This function is always called after the function
++ * armada_3700_pm_dvfs_is_enabled, so no need to check again
++ * if the base is valid
++ */
++ regmap_read(base, reg, &load_level);
++
++ /*
++ * The register and the offset inside this register accessed to
++ * read the current divider depend on the load level
++ */
++ load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
++ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset);
++
++ regmap_read(base, reg, &sel);
++
++ return (sel >> offset) & ARMADA_37XX_NB_TBG_SEL_MASK;
++}
++
+ static u8 clk_pm_cpu_get_parent(struct clk_hw *hw)
+ {
+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
+ int num_parents = clk_hw_get_num_parents(hw);
+ u32 val;
+
+- val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux;
+- val &= pm_cpu->mask_mux;
++ if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) {
++ val = armada_3700_pm_dvfs_get_cpu_parent(pm_cpu->nb_pm_base);
++ } else {
++ val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux;
++ val &= pm_cpu->mask_mux;
++ }
+
+ if (val >= num_parents)
+ return -EINVAL;
+@@ -331,19 +434,124 @@ static u8 clk_pm_cpu_get_parent(struct c
+ return val;
+ }
+
++static int clk_pm_cpu_set_parent(struct clk_hw *hw, u8 index)
++{
++ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
++ struct regmap *base = pm_cpu->nb_pm_base;
++ int load_level;
++
++ /*
++ * We set the clock parent only if the DVFS is available but
++ * not enabled.
++ */
++ if (IS_ERR(base) || armada_3700_pm_dvfs_is_enabled(base))
++ return -EINVAL;
++
++ /* Set the parent clock for all the load level */
++ for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
++ unsigned int reg, mask, val,
++ offset = ARMADA_37XX_NB_TBG_SEL_OFF;
++
++ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset);
++
++ val = index << offset;
++ mask = ARMADA_37XX_NB_TBG_SEL_MASK << offset;
++ regmap_update_bits(base, reg, mask, val);
++ }
++ return 0;
++}
++
+ static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+ {
+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
+ unsigned int div;
+
+- div = get_div(pm_cpu->reg_div, pm_cpu->shift_div);
+-
++ if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base))
++ div = armada_3700_pm_dvfs_get_cpu_div(pm_cpu->nb_pm_base);
++ else
++ div = get_div(pm_cpu->reg_div, pm_cpu->shift_div);
+ return DIV_ROUND_UP_ULL((u64)parent_rate, div);
+ }
+
++static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
++ unsigned long *parent_rate)
++{
++ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
++ struct regmap *base = pm_cpu->nb_pm_base;
++ unsigned int div = *parent_rate / rate;
++ unsigned int load_level;
++ /* only available when DVFS is enabled */
++ if (!armada_3700_pm_dvfs_is_enabled(base))
++ return -EINVAL;
++
++ for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
++ unsigned int reg, val, offset = ARMADA_37XX_NB_TBG_DIV_OFF;
++
++ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset);
++
++ regmap_read(base, reg, &val);
++
++ val >>= offset;
++ val &= ARMADA_37XX_NB_TBG_DIV_MASK;
++ if (val == div)
++ /*
++ * We found a load level matching the target
++ * divider, switch to this load level and
++ * return.
++ */
++ return *parent_rate / div;
++ }
++
++ /* We didn't find any valid divider */
++ return -EINVAL;
++}
++
++static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
++ unsigned long parent_rate)
++{
++ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
++ struct regmap *base = pm_cpu->nb_pm_base;
++ unsigned int div = parent_rate / rate;
++ unsigned int load_level;
++
++ /* only available when DVFS is enabled */
++ if (!armada_3700_pm_dvfs_is_enabled(base))
++ return -EINVAL;
++
++ for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
++ unsigned int reg, mask, val,
++ offset = ARMADA_37XX_NB_TBG_DIV_OFF;
++
++ armada_3700_pm_dvfs_update_regs(load_level, ®, &offset);
++
++ regmap_read(base, reg, &val);
++ val >>= offset;
++ val &= ARMADA_37XX_NB_TBG_DIV_MASK;
++
++ if (val == div) {
++ /*
++ * We found a load level matching the target
++ * divider, switch to this load level and
++ * return.
++ */
++ reg = ARMADA_37XX_NB_CPU_LOAD;
++ mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
++ regmap_update_bits(base, reg, mask, load_level);
++
++ return rate;
++ }
++ }
++
++ /* We didn't find any valid divider */
++ return -EINVAL;
++}
++
+ static const struct clk_ops clk_pm_cpu_ops = {
+ .get_parent = clk_pm_cpu_get_parent,
++ .set_parent = clk_pm_cpu_set_parent,
++ .round_rate = clk_pm_cpu_round_rate,
++ .set_rate = clk_pm_cpu_set_rate,
+ .recalc_rate = clk_pm_cpu_recalc_rate,
+ };
+
+@@ -409,6 +617,7 @@ static int armada_3700_add_composite_clk
+ if (data->muxrate_hw) {
+ struct clk_pm_cpu *pmcpu_clk;
+ struct clk_hw *muxrate_hw = data->muxrate_hw;
++ struct regmap *map;
+
+ pmcpu_clk = to_clk_pm_cpu(muxrate_hw);
+ pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux;
+@@ -418,6 +627,10 @@ static int armada_3700_add_composite_clk
+ rate_hw = muxrate_hw;
+ mux_ops = muxrate_hw->init->ops;
+ rate_ops = muxrate_hw->init->ops;
++
++ map = syscon_regmap_lookup_by_compatible(
++ "marvell,armada-3700-nb-pm");
++ pmcpu_clk->nb_pm_base = map;
+ }
+
+ *hw = clk_hw_register_composite(dev, data->name, data->parent_names,
+++ /dev/null
-From 2ff0d0b5bb397c3dc5c9b97bd0f20948f0b77740 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@free-electrons.com>
-Date: Fri, 13 Oct 2017 11:01:57 +0200
-Subject: arm64: dts: marvell: armada-37xx: add UART clock
-
-Add the missing clock property to armada-3700 UART node.
-
-This clock will be used to derive the prescaler value to comply with
-the requested baudrate.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
-Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
----
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -135,6 +135,7 @@
- uart0: serial@12000 {
- compatible = "marvell,armada-3700-uart";
- reg = <0x12000 0x200>;
-+ clocks = <&xtalclk>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
--- /dev/null
+From 92ce45fb875d7c3e021cc454482fe0687ff54f29 Mon Sep 17 00:00:00 2001
+From: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Date: Thu, 14 Dec 2017 16:00:05 +0100
+Subject: cpufreq: Add DVFS support for Armada 37xx
+
+This patch adds DVFS support for the Armada 37xx SoCs
+
+There are up to four CPU frequency loads for Armada 37xx controlled by
+the hardware.
+
+This driver associates the CPU load level to a frequency, then the
+hardware will switch while selecting a load level.
+
+The hardware also can associate a voltage for each level (AVS support)
+but it is not yet supported
+
+Tested-by: Andre Heider <a.heider@gmail.com>
+Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
+Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+---
+ drivers/cpufreq/Kconfig.arm | 7 +
+ drivers/cpufreq/Makefile | 1 +
+ drivers/cpufreq/armada-37xx-cpufreq.c | 241 ++++++++++++++++++++++++++++++++++
+ 3 files changed, 249 insertions(+)
+ create mode 100644 drivers/cpufreq/armada-37xx-cpufreq.c
+
+--- a/drivers/cpufreq/Kconfig.arm
++++ b/drivers/cpufreq/Kconfig.arm
+@@ -2,6 +2,13 @@
+ # ARM CPU Frequency scaling drivers
+ #
+
++config ARM_ARMADA_37XX_CPUFREQ
++ tristate "Armada 37xx CPUFreq support"
++ depends on ARCH_MVEBU
++ help
++ This adds the CPUFreq driver support for Marvell Armada 37xx SoCs.
++ The Armada 37xx PMU supports 4 frequency and VDD levels.
++
+ # big LITTLE core layer and glue drivers
+ config ARM_BIG_LITTLE_CPUFREQ
+ tristate "Generic ARM big LITTLE CPUfreq driver"
+--- a/drivers/cpufreq/Makefile
++++ b/drivers/cpufreq/Makefile
+@@ -52,6 +52,7 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) +=
+ # LITTLE drivers, so that it is probed last.
+ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
+
++obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o
+ obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o
+ obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
+ obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
+--- /dev/null
++++ b/drivers/cpufreq/armada-37xx-cpufreq.c
+@@ -0,0 +1,241 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * CPU frequency scaling support for Armada 37xx platform.
++ *
++ * Copyright (C) 2017 Marvell
++ *
++ * Gregory CLEMENT <gregory.clement@free-electrons.com>
++ */
++
++#include <linux/clk.h>
++#include <linux/cpu.h>
++#include <linux/cpufreq.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/mfd/syscon.h>
++#include <linux/module.h>
++#include <linux/of_address.h>
++#include <linux/of_device.h>
++#include <linux/of_irq.h>
++#include <linux/platform_device.h>
++#include <linux/pm_opp.h>
++#include <linux/regmap.h>
++#include <linux/slab.h>
++
++/* Power management in North Bridge register set */
++#define ARMADA_37XX_NB_L0L1 0x18
++#define ARMADA_37XX_NB_L2L3 0x1C
++#define ARMADA_37XX_NB_TBG_DIV_OFF 13
++#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7
++#define ARMADA_37XX_NB_CLK_SEL_OFF 11
++#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1
++#define ARMADA_37XX_NB_CLK_SEL_TBG 0x1
++#define ARMADA_37XX_NB_TBG_SEL_OFF 9
++#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3
++#define ARMADA_37XX_NB_VDD_SEL_OFF 6
++#define ARMADA_37XX_NB_VDD_SEL_MASK 0x3
++#define ARMADA_37XX_NB_CONFIG_SHIFT 16
++#define ARMADA_37XX_NB_DYN_MOD 0x24
++#define ARMADA_37XX_NB_CLK_SEL_EN BIT(26)
++#define ARMADA_37XX_NB_TBG_EN BIT(28)
++#define ARMADA_37XX_NB_DIV_EN BIT(29)
++#define ARMADA_37XX_NB_VDD_EN BIT(30)
++#define ARMADA_37XX_NB_DFS_EN BIT(31)
++#define ARMADA_37XX_NB_CPU_LOAD 0x30
++#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3
++#define ARMADA_37XX_DVFS_LOAD_0 0
++#define ARMADA_37XX_DVFS_LOAD_1 1
++#define ARMADA_37XX_DVFS_LOAD_2 2
++#define ARMADA_37XX_DVFS_LOAD_3 3
++
++/*
++ * On Armada 37xx the Power management manages 4 level of CPU load,
++ * each level can be associated with a CPU clock source, a CPU
++ * divider, a VDD level, etc...
++ */
++#define LOAD_LEVEL_NR 4
++
++struct armada_37xx_dvfs {
++ u32 cpu_freq_max;
++ u8 divider[LOAD_LEVEL_NR];
++};
++
++static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
++ {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} },
++ {.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} },
++ {.cpu_freq_max = 800*1000*1000, .divider = {1, 2, 3, 4} },
++ {.cpu_freq_max = 600*1000*1000, .divider = {2, 4, 5, 6} },
++};
++
++static struct armada_37xx_dvfs *armada_37xx_cpu_freq_info_get(u32 freq)
++{
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(armada_37xx_dvfs); i++) {
++ if (freq == armada_37xx_dvfs[i].cpu_freq_max)
++ return &armada_37xx_dvfs[i];
++ }
++
++ pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000);
++ return NULL;
++}
++
++/*
++ * Setup the four level managed by the hardware. Once the four level
++ * will be configured then the DVFS will be enabled.
++ */
++static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
++ struct clk *clk, u8 *divider)
++{
++ int load_lvl;
++ struct clk *parent;
++
++ for (load_lvl = 0; load_lvl < LOAD_LEVEL_NR; load_lvl++) {
++ unsigned int reg, mask, val, offset = 0;
++
++ if (load_lvl <= ARMADA_37XX_DVFS_LOAD_1)
++ reg = ARMADA_37XX_NB_L0L1;
++ else
++ reg = ARMADA_37XX_NB_L2L3;
++
++ if (load_lvl == ARMADA_37XX_DVFS_LOAD_0 ||
++ load_lvl == ARMADA_37XX_DVFS_LOAD_2)
++ offset += ARMADA_37XX_NB_CONFIG_SHIFT;
++
++ /* Set cpu clock source, for all the level we use TBG */
++ val = ARMADA_37XX_NB_CLK_SEL_TBG << ARMADA_37XX_NB_CLK_SEL_OFF;
++ mask = (ARMADA_37XX_NB_CLK_SEL_MASK
++ << ARMADA_37XX_NB_CLK_SEL_OFF);
++
++ /*
++ * Set cpu divider based on the pre-computed array in
++ * order to have balanced step.
++ */
++ val |= divider[load_lvl] << ARMADA_37XX_NB_TBG_DIV_OFF;
++ mask |= (ARMADA_37XX_NB_TBG_DIV_MASK
++ << ARMADA_37XX_NB_TBG_DIV_OFF);
++
++ /* Set VDD divider which is actually the load level. */
++ val |= load_lvl << ARMADA_37XX_NB_VDD_SEL_OFF;
++ mask |= (ARMADA_37XX_NB_VDD_SEL_MASK
++ << ARMADA_37XX_NB_VDD_SEL_OFF);
++
++ val <<= offset;
++ mask <<= offset;
++
++ regmap_update_bits(base, reg, mask, val);
++ }
++
++ /*
++ * Set cpu clock source, for all the level we keep the same
++ * clock source that the one already configured. For this one
++ * we need to use the clock framework
++ */
++ parent = clk_get_parent(clk);
++ clk_set_parent(clk, parent);
++}
++
++static void __init armada37xx_cpufreq_disable_dvfs(struct regmap *base)
++{
++ unsigned int reg = ARMADA_37XX_NB_DYN_MOD,
++ mask = ARMADA_37XX_NB_DFS_EN;
++
++ regmap_update_bits(base, reg, mask, 0);
++}
++
++static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base)
++{
++ unsigned int val, reg = ARMADA_37XX_NB_CPU_LOAD,
++ mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
++
++ /* Start with the highest load (0) */
++ val = ARMADA_37XX_DVFS_LOAD_0;
++ regmap_update_bits(base, reg, mask, val);
++
++ /* Now enable DVFS for the CPUs */
++ reg = ARMADA_37XX_NB_DYN_MOD;
++ mask = ARMADA_37XX_NB_CLK_SEL_EN | ARMADA_37XX_NB_TBG_EN |
++ ARMADA_37XX_NB_DIV_EN | ARMADA_37XX_NB_VDD_EN |
++ ARMADA_37XX_NB_DFS_EN;
++
++ regmap_update_bits(base, reg, mask, mask);
++}
++
++static int __init armada37xx_cpufreq_driver_init(void)
++{
++ struct armada_37xx_dvfs *dvfs;
++ struct platform_device *pdev;
++ unsigned int cur_frequency;
++ struct regmap *nb_pm_base;
++ struct device *cpu_dev;
++ int load_lvl, ret;
++ struct clk *clk;
++
++ nb_pm_base =
++ syscon_regmap_lookup_by_compatible("marvell,armada-3700-nb-pm");
++
++ if (IS_ERR(nb_pm_base))
++ return -ENODEV;
++
++ /* Before doing any configuration on the DVFS first, disable it */
++ armada37xx_cpufreq_disable_dvfs(nb_pm_base);
++
++ /*
++ * On CPU 0 register the operating points supported (which are
++ * the nominal CPU frequency and full integer divisions of
++ * it).
++ */
++ cpu_dev = get_cpu_device(0);
++ if (!cpu_dev) {
++ dev_err(cpu_dev, "Cannot get CPU\n");
++ return -ENODEV;
++ }
++
++ clk = clk_get(cpu_dev, 0);
++ if (IS_ERR(clk)) {
++ dev_err(cpu_dev, "Cannot get clock for CPU0\n");
++ return PTR_ERR(clk);
++ }
++
++ /* Get nominal (current) CPU frequency */
++ cur_frequency = clk_get_rate(clk);
++ if (!cur_frequency) {
++ dev_err(cpu_dev, "Failed to get clock rate for CPU\n");
++ return -EINVAL;
++ }
++
++ dvfs = armada_37xx_cpu_freq_info_get(cur_frequency);
++ if (!dvfs)
++ return -EINVAL;
++
++ armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
++
++ for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
++ load_lvl++) {
++ unsigned long freq = cur_frequency / dvfs->divider[load_lvl];
++
++ ret = dev_pm_opp_add(cpu_dev, freq, 0);
++ if (ret) {
++ /* clean-up the already added opp before leaving */
++ while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) {
++ freq = cur_frequency / dvfs->divider[load_lvl];
++ dev_pm_opp_remove(cpu_dev, freq);
++ }
++ return ret;
++ }
++ }
++
++ /* Now that everything is setup, enable the DVFS at hardware level */
++ armada37xx_cpufreq_enable_dvfs(nb_pm_base);
++
++ pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
++
++ return PTR_ERR_OR_ZERO(pdev);
++}
++/* late_initcall, to guarantee the driver is loaded after A37xx clock driver */
++late_initcall(armada37xx_cpufreq_driver_init);
++
++MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
++MODULE_DESCRIPTION("Armada 37xx cpufreq driver");
++MODULE_LICENSE("GPL");
--- /dev/null
+From bffed3d4abcd32ba6d492a9bd7ebe81dc92eaa9a Mon Sep 17 00:00:00 2001
+From: Ellie Reeves <ellierevves@gmail.com>
+Date: Sun, 25 Mar 2018 21:57:36 +0200
+Subject: [PATCH] arm64: dts: armada-3720-espressobin: wire up spi flash
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is the storage the machine boots from by default. The partitioning
+is taken from the U-Boot that is shipped with the board. There is some
+more space on the flash that isn't used.
+
+Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
+Signed-off-by: Ellie Reeves <ellierevves@gmail.com>
+Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
+
+[drop partitions, not every U-Boot has same layout]
+Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
+---
+ .../dts/marvell/armada-3720-espressobin.dts | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
++++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+@@ -96,6 +96,19 @@
+ status = "okay";
+ };
+
++&spi0 {
++ status = "okay";
++
++ flash@0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ reg = <0>;
++ compatible = "winbond,w25q32dw", "jedec,spi-flash";
++ spi-max-frequency = <104000000>;
++ m25p,fast-read;
++ };
++};
++
+ /* Exported on the micro USB connector J5 through an FTDI */
+ &uart0 {
+ status = "okay";
+++ /dev/null
-From bbcc328561040292f7d6796954d478e4a2335e6f Mon Sep 17 00:00:00 2001
-From: Gregory CLEMENT <gregory.clement@bootlin.com>
-Date: Wed, 4 Apr 2018 16:44:44 +0200
-Subject: [PATCH] cpufreq: armada-37xx: Fix clock leak
-
-There was no clk_put() balancing the clk_get(). This commit fixes it.
-
-Fixes: 92ce45fb875d (cpufreq: Add DVFS support for Armada 37xx)
-Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
-Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
-Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/cpufreq/armada-37xx-cpufreq.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/cpufreq/armada-37xx-cpufreq.c
-+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
-@@ -202,6 +202,7 @@ static int __init armada37xx_cpufreq_dri
- cur_frequency = clk_get_rate(clk);
- if (!cur_frequency) {
- dev_err(cpu_dev, "Failed to get clock rate for CPU\n");
-+ clk_put(clk);
- return -EINVAL;
- }
-
-@@ -210,6 +211,7 @@ static int __init armada37xx_cpufreq_dri
- return -EINVAL;
-
- armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
-+ clk_put(clk);
-
- for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
- load_lvl++) {
--- /dev/null
+From bbcc328561040292f7d6796954d478e4a2335e6f Mon Sep 17 00:00:00 2001
+From: Gregory CLEMENT <gregory.clement@bootlin.com>
+Date: Wed, 4 Apr 2018 16:44:44 +0200
+Subject: [PATCH] cpufreq: armada-37xx: Fix clock leak
+
+There was no clk_put() balancing the clk_get(). This commit fixes it.
+
+Fixes: 92ce45fb875d (cpufreq: Add DVFS support for Armada 37xx)
+Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
+Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
+Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
+Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+---
+ drivers/cpufreq/armada-37xx-cpufreq.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/cpufreq/armada-37xx-cpufreq.c
++++ b/drivers/cpufreq/armada-37xx-cpufreq.c
+@@ -202,6 +202,7 @@ static int __init armada37xx_cpufreq_dri
+ cur_frequency = clk_get_rate(clk);
+ if (!cur_frequency) {
+ dev_err(cpu_dev, "Failed to get clock rate for CPU\n");
++ clk_put(clk);
+ return -EINVAL;
+ }
+
+@@ -210,6 +211,7 @@ static int __init armada37xx_cpufreq_dri
+ return -EINVAL;
+
+ armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
++ clk_put(clk);
+
+ for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
+ load_lvl++) {
+++ /dev/null
-From bffed3d4abcd32ba6d492a9bd7ebe81dc92eaa9a Mon Sep 17 00:00:00 2001
-From: Ellie Reeves <ellierevves@gmail.com>
-Date: Sun, 25 Mar 2018 21:57:36 +0200
-Subject: [PATCH] arm64: dts: armada-3720-espressobin: wire up spi flash
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is the storage the machine boots from by default. The partitioning
-is taken from the U-Boot that is shipped with the board. There is some
-more space on the flash that isn't used.
-
-Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
-Signed-off-by: Ellie Reeves <ellierevves@gmail.com>
-Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
-
-[drop partitions, not every U-Boot has same layout]
-Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
----
- .../dts/marvell/armada-3720-espressobin.dts | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -96,6 +96,19 @@
- status = "okay";
- };
-
-+&spi0 {
-+ status = "okay";
-+
-+ flash@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ reg = <0>;
-+ compatible = "winbond,w25q32dw", "jedec,spi-flash";
-+ spi-max-frequency = <104000000>;
-+ m25p,fast-read;
-+ };
-+};
-+
- /* Exported on the micro USB connector J5 through an FTDI */
- &uart0 {
- status = "okay";
projects / openwrt / staging / adrian.git / commitdiff