serial: imx: drop support for IRDA

Support for IRDA was added in 2009 in commit v2.6.31-rc1~399^2~2. There
are no in-tree users.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index cbbb47385877ef1ab12ebb3ae8ac2fe5193c7bc6..6dc1d2781b866196986bc2fd35d2988743fde41b 100644 (file)
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -6,9 +6,6 @@
  * Author: Sascha Hauer <sascha@saschahauer.de>
  * Copyright (C) 2004 Pengutronix
  *
- * Author: Fabian Godehardt (added IrDA support for iMX)
- * Copyright (C) 2009 emlix GmbH
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -201,7 +198,6 @@ struct imx_port {
        unsigned int            old_status;
        unsigned int            have_rtscts:1;
        unsigned int            dte_mode:1;
-       unsigned int            use_irda:1;
        unsigned int            irda_inv_rx:1;
        unsigned int            irda_inv_tx:1;
        unsigned short          trcv_delay; /* transceiver delay */
@@ -228,12 +224,6 @@ struct imx_port_ucrs {
        unsigned int    ucr3;
 };
 
-#ifdef CONFIG_IRDA
-#define USE_IRDA(sport)        ((sport)->use_irda)
-#else
-#define USE_IRDA(sport)        (0)
-#endif
-
 static struct imx_uart_data imx_uart_devdata[] = {
        [IMX1_UART] = {
                .uts_reg = IMX1_UTS,
@@ -368,48 +358,6 @@ static void imx_stop_tx(struct uart_port *port)
        struct imx_port *sport = (struct imx_port *)port;
        unsigned long temp;
 
-       if (USE_IRDA(sport)) {
-               /* half duplex - wait for end of transmission */
-               int n = 256;
-               while ((--n > 0) &&
-                     !(readl(sport->port.membase + USR2) & USR2_TXDC)) {
-                       udelay(5);
-                       barrier();
-               }
-               /*
-                * irda transceiver - wait a bit more to avoid
-                * cutoff, hardware dependent
-                */
-               udelay(sport->trcv_delay);
-
-               /*
-                * half duplex - reactivate receive mode,
-                * flush receive pipe echo crap
-                */
-               if (readl(sport->port.membase + USR2) & USR2_TXDC) {
-                       temp = readl(sport->port.membase + UCR1);
-                       temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN);
-                       writel(temp, sport->port.membase + UCR1);
-
-                       temp = readl(sport->port.membase + UCR4);
-                       temp &= ~(UCR4_TCEN);
-                       writel(temp, sport->port.membase + UCR4);
-
-                       while (readl(sport->port.membase + URXD0) &
-                              URXD_CHARRDY)
-                               barrier();
-
-                       temp = readl(sport->port.membase + UCR1);
-                       temp |= UCR1_RRDYEN;
-                       writel(temp, sport->port.membase + UCR1);
-
-                       temp = readl(sport->port.membase + UCR4);
-                       temp |= UCR4_DREN;
-                       writel(temp, sport->port.membase + UCR4);
-               }
-               return;
-       }
-
        /*
         * We are maybe in the SMP context, so if the DMA TX thread is running
         * on other cpu, we have to wait for it to finish.
@@ -612,32 +560,11 @@ static void imx_start_tx(struct uart_port *port)
        struct imx_port *sport = (struct imx_port *)port;
        unsigned long temp;
 
-       if (USE_IRDA(sport)) {
-               /* half duplex in IrDA mode; have to disable receive mode */
-               temp = readl(sport->port.membase + UCR4);
-               temp &= ~(UCR4_DREN);
-               writel(temp, sport->port.membase + UCR4);
-
-               temp = readl(sport->port.membase + UCR1);
-               temp &= ~(UCR1_RRDYEN);
-               writel(temp, sport->port.membase + UCR1);
-       }
-
        if (!sport->dma_is_enabled) {
                temp = readl(sport->port.membase + UCR1);
                writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
        }
 
-       if (USE_IRDA(sport)) {
-               temp = readl(sport->port.membase + UCR1);
-               temp |= UCR1_TRDYEN;
-               writel(temp, sport->port.membase + UCR1);
-
-               temp = readl(sport->port.membase + UCR4);
-               temp |= UCR4_TCEN;
-               writel(temp, sport->port.membase + UCR4);
-       }
-
        if (sport->dma_is_enabled) {
                if (sport->port.x_char) {
                        /* We have X-char to send, so enable TX IRQ and
@@ -1148,9 +1075,6 @@ static int imx_startup(struct uart_port *port)
         */
        temp = readl(sport->port.membase + UCR4);
 
-       if (USE_IRDA(sport))
-               temp |= UCR4_IRSC;
-
        /* set the trigger level for CTS */
        temp &= ~(UCR4_CTSTL_MASK << UCR4_CTSTL_SHF);
        temp |= CTSTL << UCR4_CTSTL_SHF;
@@ -1186,11 +1110,6 @@ static int imx_startup(struct uart_port *port)
        temp = readl(sport->port.membase + UCR1);
        temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
 
-       if (USE_IRDA(sport)) {
-               temp |= UCR1_IREN;
-               temp &= ~(UCR1_RTSDEN);
-       }
-
        writel(temp, sport->port.membase + UCR1);
 
        temp = readl(sport->port.membase + UCR4);
@@ -1209,38 +1128,12 @@ static int imx_startup(struct uart_port *port)
                writel(temp, sport->port.membase + UCR3);
        }
 
-       if (USE_IRDA(sport)) {
-               temp = readl(sport->port.membase + UCR4);
-               if (sport->irda_inv_rx)
-                       temp |= UCR4_INVR;
-               else
-                       temp &= ~(UCR4_INVR);
-               writel(temp | UCR4_DREN, sport->port.membase + UCR4);
-
-               temp = readl(sport->port.membase + UCR3);
-               if (sport->irda_inv_tx)
-                       temp |= UCR3_INVT;
-               else
-                       temp &= ~(UCR3_INVT);
-               writel(temp, sport->port.membase + UCR3);
-       }
-
        /*
         * Enable modem status interrupts
         */
        imx_enable_ms(&sport->port);
        spin_unlock_irqrestore(&sport->port.lock, flags);
 
-       if (USE_IRDA(sport)) {
-               struct imxuart_platform_data *pdata;
-               pdata = dev_get_platdata(sport->port.dev);
-               sport->irda_inv_rx = pdata->irda_inv_rx;
-               sport->irda_inv_tx = pdata->irda_inv_tx;
-               sport->trcv_delay = pdata->transceiver_delay;
-               if (pdata->irda_enable)
-                       pdata->irda_enable(1);
-       }
-
        return 0;
 }
 
@@ -1276,13 +1169,6 @@ static void imx_shutdown(struct uart_port *port)
        writel(temp, sport->port.membase + UCR2);
        spin_unlock_irqrestore(&sport->port.lock, flags);
 
-       if (USE_IRDA(sport)) {
-               struct imxuart_platform_data *pdata;
-               pdata = dev_get_platdata(sport->port.dev);
-               if (pdata->irda_enable)
-                       pdata->irda_enable(0);
-       }
-
        /*
         * Stop our timer.
         */
@@ -1295,8 +1181,6 @@ static void imx_shutdown(struct uart_port *port)
        spin_lock_irqsave(&sport->port.lock, flags);
        temp = readl(sport->port.membase + UCR1);
        temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
-       if (USE_IRDA(sport))
-               temp &= ~(UCR1_IREN);
 
        writel(temp, sport->port.membase + UCR1);
        spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -1450,24 +1334,16 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
                        sport->port.membase + UCR2);
        old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
 
-       if (USE_IRDA(sport)) {
-               /*
-                * use maximum available submodule frequency to
-                * avoid missing short pulses due to low sampling rate
-                */
+       /* custom-baudrate handling */
+       div = sport->port.uartclk / (baud * 16);
+       if (baud == 38400 && quot != div)
+               baud = sport->port.uartclk / (quot * 16);
+
+       div = sport->port.uartclk / (baud * 16);
+       if (div > 7)
+               div = 7;
+       if (!div)
                div = 1;
-       } else {
-               /* custom-baudrate handling */
-               div = sport->port.uartclk / (baud * 16);
-               if (baud == 38400 && quot != div)
-                       baud = sport->port.uartclk / (quot * 16);
-
-               div = sport->port.uartclk / (baud * 16);
-               if (div > 7)
-                       div = 7;
-               if (!div)
-                       div = 1;
-       }
 
        rational_best_approximation(16 * div * baud, sport->port.uartclk,
                1 << 16, 1 << 16, &num, &denom);
@@ -1906,9 +1782,6 @@ static int serial_imx_probe_dt(struct imx_port *sport,
        if (of_get_property(np, "fsl,uart-has-rtscts", NULL))
                sport->have_rtscts = 1;
 
-       if (of_get_property(np, "fsl,irda-mode", NULL))
-               sport->use_irda = 1;
-
        if (of_get_property(np, "fsl,dte-mode", NULL))
                sport->dte_mode = 1;
 
@@ -1937,9 +1810,6 @@ static void serial_imx_probe_pdata(struct imx_port *sport,
 
        if (pdata->flags & IMXUART_HAVE_RTSCTS)
                sport->have_rtscts = 1;
-
-       if (pdata->flags & IMXUART_IRDA)
-               sport->use_irda = 1;
 }
 
 static int serial_imx_probe(struct platform_device *pdev)
@@ -2012,15 +1882,6 @@ static int serial_imx_probe(struct platform_device *pdev)
                                       dev_name(&pdev->dev), sport);
                if (ret)
                        return ret;
-
-               /* do not use RTS IRQ on IrDA */
-               if (!USE_IRDA(sport)) {
-                       ret = devm_request_irq(&pdev->dev, rtsirq,
-                                              imx_rtsint, 0,
-                                              dev_name(&pdev->dev), sport);
-                       if (ret)
-                               return ret;
-               }
        } else {
                ret = devm_request_irq(&pdev->dev, rxirq, imx_int, 0,
                                       dev_name(&pdev->dev), sport);

diff --git a/include/linux/platform_data/serial-imx.h b/include/linux/platform_data/serial-imx.h
index 3cc2e3c40914dd3b29b5f68d7c5efd675c2d229b..a938eba2f18e619c7e67696352904457ac54dead 100644 (file)
--- a/include/linux/platform_data/serial-imx.h
+++ b/include/linux/platform_data/serial-imx.h
@@ -20,14 +20,9 @@
 #define ASMARM_ARCH_UART_H
 
 #define IMXUART_HAVE_RTSCTS (1<<0)
-#define IMXUART_IRDA        (1<<1)
 
 struct imxuart_platform_data {
        unsigned int flags;
-       void (*irda_enable)(int enable);
-       unsigned int irda_inv_rx:1;
-       unsigned int irda_inv_tx:1;
-       unsigned short transceiver_delay;
 };
 
 #endif