--- /dev/null
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+*/
+
+#ifndef coldfire_gpio_h
+#define coldfire_gpio_h
+
+#include <linux/io.h>
+#include <asm-generic/gpio.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/*
+ * The Freescale Coldfire family is quite varied in how they implement GPIO.
+ * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have
+ * only one port, others have multiple ports; some have a single data latch
+ * for both input and output, others have a separate pin data register to read
+ * input; some require a read-modify-write access to change an output, others
+ * have set and clear registers for some of the outputs; Some have all the
+ * GPIOs in a single control area, others have some GPIOs implemented in
+ * different modules.
+ *
+ * This implementation attempts accomodate the differences while presenting
+ * a generic interface that will optimize to as few instructions as possible.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+
+/* These parts have GPIO organized by 8 bit ports */
+
+#define MCFGPIO_PORTTYPE u8
+#define MCFGPIO_PORTSIZE 8
+#define mcfgpio_read(port) __raw_readb(port)
+#define mcfgpio_write(data, port) __raw_writeb(data, port)
+
+#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272)
+
+/* These parts have GPIO organized by 16 bit ports */
+
+#define MCFGPIO_PORTTYPE u16
+#define MCFGPIO_PORTSIZE 16
+#define mcfgpio_read(port) __raw_readw(port)
+#define mcfgpio_write(data, port) __raw_writew(data, port)
+
+#elif defined(CONFIG_M5249)
+
+/* These parts have GPIO organized by 32 bit ports */
+
+#define MCFGPIO_PORTTYPE u32
+#define MCFGPIO_PORTSIZE 32
+#define mcfgpio_read(port) __raw_readl(port)
+#define mcfgpio_write(data, port) __raw_writel(data, port)
+
+#endif
+
+#define mcfgpio_bit(gpio) (1 << ((gpio) % MCFGPIO_PORTSIZE))
+#define mcfgpio_port(gpio) ((gpio) / MCFGPIO_PORTSIZE)
+
+#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+/*
+ * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses
+ * read-modify-write to change an output and a GPIO module which has separate
+ * set/clr registers to directly change outputs with a single write access.
+ */
+#if defined(CONFIG_M528x)
+/*
+ * The 528x also has GPIOs in other modules (GPT, QADC) which use
+ * read-modify-write as well as those controlled by the EPORT and GPIO modules.
+ */
+#define MCFGPIO_SCR_START 40
+#else
+#define MCFGPIO_SCR_START 8
+#endif
+
+#define MCFGPIO_SETR_PORT(gpio) (MCFGPIO_SETR + \
+ mcfgpio_port(gpio - MCFGPIO_SCR_START))
+
+#define MCFGPIO_CLRR_PORT(gpio) (MCFGPIO_CLRR + \
+ mcfgpio_port(gpio - MCFGPIO_SCR_START))
+#else
+
+#define MCFGPIO_SCR_START MCFGPIO_PIN_MAX
+/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */
+#define MCFGPIO_SETR_PORT(gpio) 0
+#define MCFGPIO_CLRR_PORT(gpio) 0
+
+#endif
+/*
+ * Coldfire specific helper functions
+ */
+
+/* return the port pin data register for a gpio */
+static inline u32 __mcf_gpio_ppdr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M5307) || defined(CONFIG_M5407)
+ return MCFSIM_PADAT;
+#elif defined(CONFIG_M5272)
+ if (gpio < 16)
+ return MCFSIM_PADAT;
+ else if (gpio < 32)
+ return MCFSIM_PBDAT;
+ else
+ return MCFSIM_PCDAT;
+#elif defined(CONFIG_M5249)
+ if (gpio < 32)
+ return MCFSIM2_GPIOREAD;
+ else
+ return MCFSIM2_GPIO1READ;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+ if (gpio < 8)
+ return MCFEPORT_EPPDR;
+#if defined(CONFIG_M528x)
+ else if (gpio < 16)
+ return MCFGPTA_GPTPORT;
+ else if (gpio < 24)
+ return MCFGPTB_GPTPORT;
+ else if (gpio < 32)
+ return MCFQADC_PORTQA;
+ else if (gpio < 40)
+ return MCFQADC_PORTQB;
+#endif
+ else
+ return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#endif
+}
+
+/* return the port output data register for a gpio */
+static inline u32 __mcf_gpio_podr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M5307) || defined(CONFIG_M5407)
+ return MCFSIM_PADAT;
+#elif defined(CONFIG_M5272)
+ if (gpio < 16)
+ return MCFSIM_PADAT;
+ else if (gpio < 32)
+ return MCFSIM_PBDAT;
+ else
+ return MCFSIM_PCDAT;
+#elif defined(CONFIG_M5249)
+ if (gpio < 32)
+ return MCFSIM2_GPIOWRITE;
+ else
+ return MCFSIM2_GPIO1WRITE;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+ if (gpio < 8)
+ return MCFEPORT_EPDR;
+#if defined(CONFIG_M528x)
+ else if (gpio < 16)
+ return MCFGPTA_GPTPORT;
+ else if (gpio < 24)
+ return MCFGPTB_GPTPORT;
+ else if (gpio < 32)
+ return MCFQADC_PORTQA;
+ else if (gpio < 40)
+ return MCFQADC_PORTQB;
+#endif
+ else
+ return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#endif
+}
+
+/*
+ * The Generic GPIO functions
+ *
+ * If the gpio is a compile time constant and is one of the Coldfire gpios,
+ * use the inline version, otherwise dispatch thru gpiolib.
+ */
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX)
+ return mcfgpio_read(__mcf_gpio_ppdr(gpio)) & mcfgpio_bit(gpio);
+ else
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) {
+ if (gpio < MCFGPIO_SCR_START) {
+ unsigned long flags;
+ MCFGPIO_PORTTYPE data;
+
+ local_irq_save(flags);
+ data = mcfgpio_read(__mcf_gpio_podr(gpio));
+ if (value)
+ data |= mcfgpio_bit(gpio);
+ else
+ data &= ~mcfgpio_bit(gpio);
+ mcfgpio_write(data, __mcf_gpio_podr(gpio));
+ local_irq_restore(flags);
+ } else {
+ if (value)
+ mcfgpio_write(mcfgpio_bit(gpio),
+ MCFGPIO_SETR_PORT(gpio));
+ else
+ mcfgpio_write(~mcfgpio_bit(gpio),
+ MCFGPIO_CLRR_PORT(gpio));
+ }
+ } else
+ __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE : -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return (irq >= MCFGPIO_IRQ_VECBASE &&
+ irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) ?
+ irq - MCFGPIO_IRQ_VECBASE : -ENXIO;
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio);
+}
+
+#endif
--- /dev/null
+/*
+ * Coldfire generic GPIO support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef mcfgpio_h
+#define mcfgpio_h
+
+#include <linux/io.h>
+#include <asm-generic/gpio.h>
+
+struct mcf_gpio_chip {
+ struct gpio_chip gpio_chip;
+ void __iomem *pddr;
+ void __iomem *podr;
+ void __iomem *ppdr;
+ void __iomem *setr;
+ void __iomem *clrr;
+ const u8 *gpio_to_pinmux;
+};
+
+int mcf_gpio_direction_input(struct gpio_chip *, unsigned);
+int mcf_gpio_get_value(struct gpio_chip *, unsigned);
+int mcf_gpio_direction_output(struct gpio_chip *, unsigned, int);
+void mcf_gpio_set_value(struct gpio_chip *, unsigned, int);
+void mcf_gpio_set_value_fast(struct gpio_chip *, unsigned, int);
+int mcf_gpio_request(struct gpio_chip *, unsigned);
+void mcf_gpio_free(struct gpio_chip *, unsigned);
+
+#endif
--- /dev/null
+/*
+ * Coldfire generic GPIO support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <asm/gpio.h>
+#include <asm/pinmux.h>
+#include <asm/mcfgpio.h>
+
+#define MCF_CHIP(chip) container_of(chip, struct mcf_gpio_chip, gpio_chip)
+
+int mcf_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned long flags;
+ MCFGPIO_PORTTYPE dir;
+ struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+ local_irq_save(flags);
+ dir = mcfgpio_read(mcf_chip->pddr);
+ dir &= ~mcfgpio_bit(chip->base + offset);
+ mcfgpio_write(dir, mcf_chip->pddr);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+int mcf_gpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+ struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+ return mcfgpio_read(mcf_chip->ppdr) & mcfgpio_bit(chip->base + offset);
+}
+
+int mcf_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ unsigned long flags;
+ MCFGPIO_PORTTYPE data;
+ struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+ local_irq_save(flags);
+ /* write the value to the output latch */
+ data = mcfgpio_read(mcf_chip->podr);
+ if (value)
+ data |= mcfgpio_bit(chip->base + offset);
+ else
+ data &= ~mcfgpio_bit(chip->base + offset);
+ mcfgpio_write(data, mcf_chip->podr);
+
+ /* now set the direction to output */
+ data = mcfgpio_read(mcf_chip->pddr);
+ data |= mcfgpio_bit(chip->base + offset);
+ mcfgpio_write(data, mcf_chip->pddr);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+void mcf_gpio_set_value(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+ unsigned long flags;
+ MCFGPIO_PORTTYPE data;
+
+ local_irq_save(flags);
+ data = mcfgpio_read(mcf_chip->podr);
+ if (value)
+ data |= mcfgpio_bit(chip->base + offset);
+ else
+ data &= ~mcfgpio_bit(chip->base + offset);
+ mcfgpio_write(data, mcf_chip->podr);
+ local_irq_restore(flags);
+}
+
+void mcf_gpio_set_value_fast(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+ if (value)
+ mcfgpio_write(mcfgpio_bit(chip->base + offset), mcf_chip->setr);
+ else
+ mcfgpio_write(~mcfgpio_bit(chip->base + offset), mcf_chip->clrr);
+}
+
+int mcf_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+ return mcf_chip->gpio_to_pinmux ?
+ mcf_pinmux_request(mcf_chip->gpio_to_pinmux[offset], 0) : 0;
+}
+
+void mcf_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+ mcf_gpio_direction_input(chip, offset);
+
+ if (mcf_chip->gpio_to_pinmux)
+ mcf_pinmux_release(mcf_chip->gpio_to_pinmux[offset], 0);
+}
+
+struct sysdev_class mcf_gpio_sysclass = {
+ .name = "gpio",
+};
+
+static int __init mcf_gpio_sysinit(void)
+{
+ return sysdev_class_register(&mcf_gpio_sysclass);
+}
+
+core_initcall(mcf_gpio_sysinit);
projects / openwrt / staging / blogic.git / commitdiff