spi: spi-fsl-spi: automatically adapt bits-per-word in cpu mode

Taking one interrupt for every byte is rather slow. Since the
controller is perfectly capable of transmitting 32 bits at a time,
change t->bits_per-word to 32 when the length is divisible by 4 and
large enough that the reduced number of interrupts easily compensates
for the one or two extra fsl_spi_setup_transfer() calls this causes.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index e2b341943796a4e6cf68e49733ae61c18f68a4d6..b36ac6aa3b1f2864fa46e9957e6372955f7e0dbf 100644 (file)
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -363,12 +363,28 @@ static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t,
 static int fsl_spi_do_one_msg(struct spi_master *master,
                              struct spi_message *m)
 {
+       struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(master);
        struct spi_device *spi = m->spi;
        struct spi_transfer *t, *first;
        unsigned int cs_change;
        const int nsecs = 50;
        int status, last_bpw;
 
+       /*
+        * In CPU mode, optimize large byte transfers to use larger
+        * bits_per_word values to reduce number of interrupts taken.
+        */
+       if (!(mpc8xxx_spi->flags & SPI_CPM_MODE)) {
+               list_for_each_entry(t, &m->transfers, transfer_list) {
+                       if (t->len < 256 || t->bits_per_word != 8)
+                               continue;
+                       if ((t->len & 3) == 0)
+                               t->bits_per_word = 32;
+                       else if ((t->len & 1) == 0)
+                               t->bits_per_word = 16;
+               }
+       }
+
        /* Don't allow changes if CS is active */
        cs_change = 1;
        list_for_each_entry(t, &m->transfers, transfer_list) {