Set the ethernet address from flash.
MAC addresses as verified by OEM firmware:
use interface source
2g wlan0 factory 0x04 (label)
LAN eth0.1 factory 0x28 (label+1)
WAN eth0.2 factory 0x2e (label+2)
Fixes: 671c9d16e382 ("ramips: add support for HILINK HLK-7628N")
Signed-off-by: Liu Yu <f78fk@live.com>
[drop old MAC address setup from 02_network, cut out state_default
changes, face-lift commit message, add Fixes:]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
};
};
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
&wmac {
status = "okay";
};
lan_mac=$wan_mac
;;
cudy,wr1000|\
+ hilink,hlk-7628n|\
hilink,hlk-7688a|\
wavlink,wl-wn577a2|\
wavlink,wl-wn578a2)
wan_mac=$(mtd_get_mac_binary factory 0x22)
label_mac=$wan_mac
;;
- hilink,hlk-7628n)
- lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
- wan_mac=$(macaddr_add "$lan_mac" 1)
- ;;
hiwifi,hc5661a|\
hiwifi,hc5761a|\
hiwifi,hc5861b)