ARM: zImage: make sure not to relocate on top of the relocation code

If the zImage load address is slightly below the relocation address,
there is a risk for the copied data to overwrite the copy loop or
cache flush code that the relocation process requires.  Always
bump the relocation address by the size of that code to avoid this
issue.

Noticed by Tony Lindgren <tony@atomide.com>.

While at it, let's start the copy from the restart symbol which makes
the above code size computation possible by the assembler directly
(same sections), given that we don't need to preserve the code before
that point anyway. And therefore we don't need to carry the _start
pointer in r5 anymore.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 55a5bcb82ba0c51a5e158a68febbfa75554c5db2..53dd5da84f8a753a0b549b7892e9bdcf047d0c7e 100644 (file)
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -187,15 +187,14 @@ not_angel:
                bl      cache_on
 
 restart:       adr     r0, LC0
-               ldmia   r0, {r1, r2, r3, r5, r6, r9, r11, r12}
-               ldr     sp, [r0, #32]
+               ldmia   r0, {r1, r2, r3, r6, r9, r11, r12}
+               ldr     sp, [r0, #28]
 
                /*
                 * We might be running at a different address.  We need
                 * to fix up various pointers.
                 */
                sub     r0, r0, r1              @ calculate the delta offset
-               add     r5, r5, r0              @ _start
                add     r6, r6, r0              @ _edata
 
 #ifndef CONFIG_ZBOOT_ROM
@@ -214,31 +213,39 @@ restart:  adr     r0, LC0
 /*
  * Check to see if we will overwrite ourselves.
  *   r4  = final kernel address
- *   r5  = start of this image
  *   r9  = size of decompressed image
  *   r10 = end of this image, including  bss/stack/malloc space if non XIP
  * We basically want:
  *   r4 >= r10 -> OK
- *   r4 + image length <= r5 -> OK
+ *   r4 + image length <= current position (pc) -> OK
  */
                cmp     r4, r10
                bhs     wont_overwrite
                add     r10, r4, r9
-               cmp     r10, r5
+   ARM(                cmp     r10, pc         )
+ THUMB(                mov     lr, pc          )
+ THUMB(                cmp     r10, lr         )
                bls     wont_overwrite
 
 /*
  * Relocate ourselves past the end of the decompressed kernel.
- *   r5  = start of this image
  *   r6  = _edata
  *   r10 = end of the decompressed kernel
  * Because we always copy ahead, we need to do it from the end and go
  * backward in case the source and destination overlap.
  */
-               /* Round up to next 256-byte boundary. */
-               add     r10, r10, #256
+               /*
+                * Bump to the next 256-byte boundary with the size of
+                * the relocation code added. This avoids overwriting
+                * ourself when the offset is small.
+                */
+               add     r10, r10, #((reloc_code_end - restart + 256) & ~255)
                bic     r10, r10, #255
 
+               /* Get start of code we want to copy and align it down. */
+               adr     r5, restart
+               bic     r5, r5, #31
+
                sub     r9, r6, r5              @ size to copy
                add     r9, r9, #31             @ rounded up to a multiple
                bic     r9, r9, #31             @ ... of 32 bytes
@@ -346,7 +353,6 @@ not_relocated:      mov     r0, #0
 LC0:           .word   LC0                     @ r1
                .word   __bss_start             @ r2
                .word   _end                    @ r3
-               .word   _start                  @ r5
                .word   _edata                  @ r6
                .word   _image_size             @ r9
                .word   _got_start              @ r11
@@ -1075,6 +1081,7 @@ memdump:  mov     r12, r0
 #endif
 
                .ltorg
+reloc_code_end:
 
                .align
                .section ".stack", "aw", %nobits