ath79: Add support for TP-Link TL-WR842N-v2
authorRobert Marko <robimarko@gmail.com>
Sun, 7 Oct 2018 10:21:45 +0000 (12:21 +0200)
committerMathias Kresin <dev@kresin.me>
Sun, 7 Oct 2018 13:44:19 +0000 (15:44 +0200)
This PR adds support for TP-Link TL-WR842N-v2 router which is supported by ar71xx to ath79.

This is a low cost model with following specs:

CPU: Atheros AR9341 SoC
RAM: 32 MB DDR1
Flash: 8 MB NOR SPI
Switch: Internal AR9341 5 port 10/100 Mbit
Ports:  5x 10/100 Mbit(1x WAN, 4x LAN)
USB: 1x USB2.0
WLAN: 2.4 GHZ AR9341

Installation:

Simply flash the factory image through stock firmware WEB UI.

Signed-off-by: Robert Marko <robimarko@gmail.com>
target/linux/ath79/base-files/etc/board.d/01_leds
target/linux/ath79/base-files/etc/board.d/02_network
target/linux/ath79/dts/ar9341_tplink_tl-wr842n-v2.dts [new file with mode: 0644]
target/linux/ath79/image/generic-tp-link.mk

index 99646ad678141023010a3962785e89dc7a103eb6..f04eb7f5c670c57fb1df8b8f458449cad7c5ac88 100755 (executable)
@@ -77,7 +77,8 @@ tplink,tl-wr941-v4)
        ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10"
        ;;
 tplink,tl-wr740nd-v4|\
-tplink,tl-wr741nd-v4)
+tplink,tl-wr741nd-v4|\
+tplink,tl-wr842n-v2)
        ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
        ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
        ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
index f782affe34a6fb73614e7c9b7d52520ad3dad495..0cfe2c8247c8137800e88b087e600459d7db9ec0 100755 (executable)
@@ -150,6 +150,11 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
                ;;
+       tplink,tl-wr842n-v2)
+               ucidef_set_interface_wan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
+               ;;
        tplink,tl-wr941-v2)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
diff --git a/target/linux/ath79/dts/ar9341_tplink_tl-wr842n-v2.dts b/target/linux/ath79/dts/ar9341_tplink_tl-wr842n-v2.dts
new file mode 100644 (file)
index 0000000..f2dbac3
--- /dev/null
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9341.dtsi"
+
+/ {
+       model = "TP-Link TL-WR842N/ND v2";
+       compatible = "tplink,tl-wr842n-v2";
+
+       aliases {
+               serial0 = &uart;
+               led-boot = &system;
+               led-failsafe = &system;
+               led-running = &system;
+               led-upgrade = &system;
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&jtag_disable_pins>;
+
+               reset {
+                       label = "Reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+
+               rfkill {
+                       label = "WiFi";
+                       linux,code = <KEY_RFKILL>;
+                       gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               system: power {
+                       label = "tp-link:green:power";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+
+               wlan {
+                       label = "tp-link:green:wlan";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               qss {
+                       label = "tp-link:green:qss";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               wan {
+                       label = "tp-link:green:wan";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               lan1 {
+                       label = "tp-link:green:lan1";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               lan2 {
+                       label = "tp-link:green:lan2";
+                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               lan3 {
+                       label = "tp-link:green:lan3";
+                       gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               lan4 {
+                       label = "tp-link:green:lan4";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               usb {
+                       label = "tp-link:green:usb";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+                       trigger-sources = <&hub_port>;
+                       linux,default-trigger = "usbport";
+               };
+       };
+
+       gpio-export {
+               compatible = "gpio-export";
+
+               gpio_usb_power {
+                       gpio-export,name = "tp-link:power:usb";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&ref {
+       clock-frequency = <25000000>;
+};
+
+&uart {
+       status = "okay";
+};
+
+&gpio {
+       status = "okay";
+};
+
+&spi {
+       num-cs = <1>;
+
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       uboot: partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x020000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               label = "firmware";
+                               reg = <0x020000 0x7d0000>;
+                       };
+
+                       art: partition@7f0000 {
+                               label = "art";
+                               reg = <0x7f0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&usb {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+
+       hub_port: port@1 {
+               reg = <1>;
+               #trigger-source-cells = <0>;
+       };
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-handle = <&swphy0>;
+       mtd-mac-address = <&uboot 0x1fc00>;
+       mtd-mac-address-increment = <(-1)>;
+};
+
+&eth1 {
+       status = "okay";
+
+       phy-handle = <&swphy4>;
+       mtd-mac-address = <&uboot 0x1fc00>;
+       phy-mode = "gmii";
+       pll-data = <0x06000000 0x00000101 0x00001616>;
+
+       gmac-config {
+               device = <&gmac>;
+               switch-phy-swap = <1>;
+       };
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+       mtd-mac-address = <&uboot 0x1fc00>;
+};
index a9485c457ebb0aa29911c16dc30559f5e365b3f1..d65e29e72ac9da86d44f8a25cd844ef197e15ba4 100644 (file)
@@ -77,6 +77,16 @@ define Device/tplink_tl-wr1043nd-v1
 endef
 TARGET_DEVICES += tplink_tl-wr1043nd-v1
 
+define Device/tplink_tl-wr842n-v2
+  $(Device/tplink-8mlzma)
+  ATH_SOC := ar9341
+  DEVICE_TITLE := TP-LINK TL-WR842N/ND v2
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+  TPLINK_HWID := 0x8420002
+  SUPPORTED_DEVICES += tl-wr842n-v2
+endef
+TARGET_DEVICES += tplink_tl-wr842n-v2
+
 define Device/tplink_tl-wr1043nd-v2
   $(Device/tplink-8mlzma)
   ATH_SOC := qca9558