struct bnx2x_link_report_data cur_data;
/* reread mf_cfg */
- if (!CHIP_IS_E1(bp))
+ if (IS_PF(bp) && !CHIP_IS_E1(bp))
bnx2x_read_mf_cfg(bp);
/* Read the current link report info */
if (nvecs == offset)
return;
- free_irq(bp->msix_table[offset].vector, bp->dev);
- DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n",
- bp->msix_table[offset].vector);
- offset++;
+
+ /* VFs don't have a default SB */
+ if (IS_PF(bp)) {
+ free_irq(bp->msix_table[offset].vector, bp->dev);
+ DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n",
+ bp->msix_table[offset].vector);
+ offset++;
+ }
if (CNIC_SUPPORT(bp)) {
if (nvecs == offset)
void bnx2x_free_irq(struct bnx2x *bp)
{
if (bp->flags & USING_MSIX_FLAG &&
- !(bp->flags & USING_SINGLE_MSIX_FLAG))
- bnx2x_free_msix_irqs(bp, BNX2X_NUM_ETH_QUEUES(bp) +
- CNIC_SUPPORT(bp) + 1);
- else
+ !(bp->flags & USING_SINGLE_MSIX_FLAG)) {
+ int nvecs = BNX2X_NUM_ETH_QUEUES(bp) + CNIC_SUPPORT(bp);
+
+ /* vfs don't have a default status block */
+ if (IS_PF(bp))
+ nvecs++;
+
+ bnx2x_free_msix_irqs(bp, nvecs);
+ } else {
free_irq(bp->dev->irq, bp->dev);
+ }
}
int bnx2x_enable_msix(struct bnx2x *bp)
{
int i, rc, offset = 0;
- rc = request_irq(bp->msix_table[offset++].vector,
- bnx2x_msix_sp_int, 0,
- bp->dev->name, bp->dev);
- if (rc) {
- BNX2X_ERR("request sp irq failed\n");
- return -EBUSY;
+ /* no default status block for vf */
+ if (IS_PF(bp)) {
+ rc = request_irq(bp->msix_table[offset++].vector,
+ bnx2x_msix_sp_int, 0,
+ bp->dev->name, bp->dev);
+ if (rc) {
+ BNX2X_ERR("request sp irq failed\n");
+ return -EBUSY;
+ }
}
if (CNIC_SUPPORT(bp))
}
i = BNX2X_NUM_ETH_QUEUES(bp);
- offset = 1 + CNIC_SUPPORT(bp);
- netdev_info(bp->dev, "using MSI-X IRQs: sp %d fp[%d] %d ... fp[%d] %d\n",
- bp->msix_table[0].vector,
- 0, bp->msix_table[offset].vector,
- i - 1, bp->msix_table[offset + i - 1].vector);
-
+ if (IS_PF(bp)) {
+ offset = 1 + CNIC_SUPPORT(bp);
+ netdev_info(bp->dev,
+ "using MSI-X IRQs: sp %d fp[%d] %d ... fp[%d] %d\n",
+ bp->msix_table[0].vector,
+ 0, bp->msix_table[offset].vector,
+ i - 1, bp->msix_table[offset + i - 1].vector);
+ } else {
+ offset = CNIC_SUPPORT(bp);
+ netdev_info(bp->dev,
+ "using MSI-X IRQs: fp[%d] %d ... fp[%d] %d\n",
+ 0, bp->msix_table[offset].vector,
+ i - 1, bp->msix_table[offset + i - 1].vector);
+ }
return 0;
}
} while (0)
#endif /*BNX2X_STOP_ON_ERROR*/
-bool bnx2x_test_firmware_version(struct bnx2x *bp, bool is_err)
+static void bnx2x_free_fw_stats_mem(struct bnx2x *bp)
+{
+ BNX2X_PCI_FREE(bp->fw_stats, bp->fw_stats_mapping,
+ bp->fw_stats_data_sz + bp->fw_stats_req_sz);
+ return;
+}
+
+static int bnx2x_alloc_fw_stats_mem(struct bnx2x *bp)
{
- /* build FW version dword */
- u32 my_fw = (BCM_5710_FW_MAJOR_VERSION) +
- (BCM_5710_FW_MINOR_VERSION << 8) +
- (BCM_5710_FW_REVISION_VERSION << 16) +
- (BCM_5710_FW_ENGINEERING_VERSION << 24);
+ int num_groups;
+ int is_fcoe_stats = NO_FCOE(bp) ? 0 : 1;
- /* read loaded FW from chip */
- u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM);
+ /* number of queues for statistics is number of eth queues + FCoE */
+ u8 num_queue_stats = BNX2X_NUM_ETH_QUEUES(bp) + is_fcoe_stats;
- DP(NETIF_MSG_IFUP, "loaded fw %x, my fw %x\n", loaded_fw, my_fw);
+ /* Total number of FW statistics requests =
+ * 1 for port stats + 1 for PF stats + potential 2 for FCoE (fcoe proper
+ * and fcoe l2 queue) stats + num of queues (which includes another 1
+ * for fcoe l2 queue if applicable)
+ */
+ bp->fw_stats_num = 2 + is_fcoe_stats + num_queue_stats;
- if (loaded_fw != my_fw) {
- if (is_err)
- BNX2X_ERR("bnx2x with FW %x was already loaded, which mismatches my %x FW. aborting\n",
+ /* Request is built from stats_query_header and an array of
+ * stats_query_cmd_group each of which contains
+ * STATS_QUERY_CMD_COUNT rules. The real number or requests is
+ * configured in the stats_query_header.
+ */
+ num_groups =
+ (((bp->fw_stats_num) / STATS_QUERY_CMD_COUNT) +
+ (((bp->fw_stats_num) % STATS_QUERY_CMD_COUNT) ?
+ 1 : 0));
+
+ DP(BNX2X_MSG_SP, "stats fw_stats_num %d, num_groups %d\n",
+ bp->fw_stats_num, num_groups);
+ bp->fw_stats_req_sz = sizeof(struct stats_query_header) +
+ num_groups * sizeof(struct stats_query_cmd_group);
+
+ /* Data for statistics requests + stats_counter
+ * stats_counter holds per-STORM counters that are incremented
+ * when STORM has finished with the current request.
+ * memory for FCoE offloaded statistics are counted anyway,
+ * even if they will not be sent.
+ * VF stats are not accounted for here as the data of VF stats is stored
+ * in memory allocated by the VF, not here.
+ */
+ bp->fw_stats_data_sz = sizeof(struct per_port_stats) +
+ sizeof(struct per_pf_stats) +
+ sizeof(struct fcoe_statistics_params) +
+ sizeof(struct per_queue_stats) * num_queue_stats +
+ sizeof(struct stats_counter);
+
+ BNX2X_PCI_ALLOC(bp->fw_stats, &bp->fw_stats_mapping,
+ bp->fw_stats_data_sz + bp->fw_stats_req_sz);
+
+ /* Set shortcuts */
+ bp->fw_stats_req = (struct bnx2x_fw_stats_req *)bp->fw_stats;
+ bp->fw_stats_req_mapping = bp->fw_stats_mapping;
+ bp->fw_stats_data = (struct bnx2x_fw_stats_data *)
+ ((u8 *)bp->fw_stats + bp->fw_stats_req_sz);
+ bp->fw_stats_data_mapping = bp->fw_stats_mapping +
+ bp->fw_stats_req_sz;
+
+ DP(BNX2X_MSG_SP, "statistics request base address set to %x %x",
+ U64_HI(bp->fw_stats_req_mapping),
+ U64_LO(bp->fw_stats_req_mapping));
+ DP(BNX2X_MSG_SP, "statistics data base address set to %x %x",
+ U64_HI(bp->fw_stats_data_mapping),
+ U64_LO(bp->fw_stats_data_mapping));
+ return 0;
+
+alloc_mem_err:
+ bnx2x_free_fw_stats_mem(bp);
+ BNX2X_ERR("Can't allocate FW stats memory\n");
+ return -ENOMEM;
+}
+
+/* send load request to mcp and analyze response */
+static int bnx2x_nic_load_request(struct bnx2x *bp, u32 *load_code)
+{
+ /* init fw_seq */
+ bp->fw_seq =
+ (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
+ DRV_MSG_SEQ_NUMBER_MASK);
+ BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
+
+ /* Get current FW pulse sequence */
+ bp->fw_drv_pulse_wr_seq =
+ (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb) &
+ DRV_PULSE_SEQ_MASK);
+ BNX2X_DEV_INFO("drv_pulse 0x%x\n", bp->fw_drv_pulse_wr_seq);
+
+ /* load request */
+ (*load_code) = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ,
+ DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
+
+ /* if mcp fails to respond we must abort */
+ if (!(*load_code)) {
+ BNX2X_ERR("MCP response failure, aborting\n");
+ return -EBUSY;
+ }
+
+ /* If mcp refused (e.g. other port is in diagnostic mode) we
+ * must abort
+ */
+ if ((*load_code) == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+ BNX2X_ERR("MCP refused load request, aborting\n");
+ return -EBUSY;
+ }
+ return 0;
+}
+
+/* check whether another PF has already loaded FW to chip. In
+ * virtualized environments a pf from another VM may have already
+ * initialized the device including loading FW
+ */
+int bnx2x_nic_load_analyze_req(struct bnx2x *bp, u32 load_code)
+{
+ /* is another pf loaded on this engine? */
+ if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP &&
+ load_code != FW_MSG_CODE_DRV_LOAD_COMMON) {
+ /* build my FW version dword */
+ u32 my_fw = (BCM_5710_FW_MAJOR_VERSION) +
+ (BCM_5710_FW_MINOR_VERSION << 8) +
+ (BCM_5710_FW_REVISION_VERSION << 16) +
+ (BCM_5710_FW_ENGINEERING_VERSION << 24);
+
+ /* read loaded FW from chip */
+ u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM);
+
+ DP(BNX2X_MSG_SP, "loaded fw %x, my fw %x\n",
+ loaded_fw, my_fw);
+
+ /* abort nic load if version mismatch */
+ if (my_fw != loaded_fw) {
+ BNX2X_ERR("bnx2x with FW %x was already loaded which mismatches my %x FW. aborting\n",
loaded_fw, my_fw);
- return false;
+ return -EBUSY;
+ }
+ }
+ return 0;
+}
+
+/* returns the "mcp load_code" according to global load_count array */
+static int bnx2x_nic_load_no_mcp(struct bnx2x *bp, int port)
+{
+ int path = BP_PATH(bp);
+
+ DP(NETIF_MSG_IFUP, "NO MCP - load counts[%d] %d, %d, %d\n",
+ path, load_count[path][0], load_count[path][1],
+ load_count[path][2]);
+ load_count[path][0]++;
+ load_count[path][1 + port]++;
+ DP(NETIF_MSG_IFUP, "NO MCP - new load counts[%d] %d, %d, %d\n",
+ path, load_count[path][0], load_count[path][1],
+ load_count[path][2]);
+ if (load_count[path][0] == 1)
+ return FW_MSG_CODE_DRV_LOAD_COMMON;
+ else if (load_count[path][1 + port] == 1)
+ return FW_MSG_CODE_DRV_LOAD_PORT;
+ else
+ return FW_MSG_CODE_DRV_LOAD_FUNCTION;
+}
+
+/* mark PMF if applicable */
+static void bnx2x_nic_load_pmf(struct bnx2x *bp, u32 load_code)
+{
+ if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
+ (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) ||
+ (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) {
+ bp->port.pmf = 1;
+ /* We need the barrier to ensure the ordering between the
+ * writing to bp->port.pmf here and reading it from the
+ * bnx2x_periodic_task().
+ */
+ smp_mb();
+ } else {
+ bp->port.pmf = 0;
}
- return true;
+ DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
+}
+
+static void bnx2x_nic_load_afex_dcc(struct bnx2x *bp, int load_code)
+{
+ if (((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
+ (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP)) &&
+ (bp->common.shmem2_base)) {
+ if (SHMEM2_HAS(bp, dcc_support))
+ SHMEM2_WR(bp, dcc_support,
+ (SHMEM_DCC_SUPPORT_DISABLE_ENABLE_PF_TLV |
+ SHMEM_DCC_SUPPORT_BANDWIDTH_ALLOCATION_TLV));
+ if (SHMEM2_HAS(bp, afex_driver_support))
+ SHMEM2_WR(bp, afex_driver_support,
+ SHMEM_AFEX_SUPPORTED_VERSION_ONE);
+ }
+
+ /* Set AFEX default VLAN tag to an invalid value */
+ bp->afex_def_vlan_tag = -1;
}
/**
mutex_init(&bp->cnic_mutex);
- rc = bnx2x_alloc_mem_cnic(bp);
- if (rc) {
- BNX2X_ERR("Unable to allocate bp memory for cnic\n");
- LOAD_ERROR_EXIT_CNIC(bp, load_error_cnic0);
+ if (IS_PF(bp)) {
+ rc = bnx2x_alloc_mem_cnic(bp);
+ if (rc) {
+ BNX2X_ERR("Unable to allocate bp memory for cnic\n");
+ LOAD_ERROR_EXIT_CNIC(bp, load_error_cnic0);
+ }
}
rc = bnx2x_alloc_fp_mem_cnic(bp);
bnx2x_nic_init_cnic(bp);
- /* Enable Timer scan */
- REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 1);
-
- for_each_cnic_queue(bp, i) {
- rc = bnx2x_setup_queue(bp, &bp->fp[i], 0);
- if (rc) {
- BNX2X_ERR("Queue setup failed\n");
- LOAD_ERROR_EXIT(bp, load_error_cnic2);
+ if (IS_PF(bp)) {
+ /* Enable Timer scan */
+ REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 1);
+
+ /* setup cnic queues */
+ for_each_cnic_queue(bp, i) {
+ rc = bnx2x_setup_queue(bp, &bp->fp[i], 0);
+ if (rc) {
+ BNX2X_ERR("Queue setup failed\n");
+ LOAD_ERROR_EXIT(bp, load_error_cnic2);
+ }
}
}
int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
{
int port = BP_PORT(bp);
- u32 load_code;
- int i, rc;
+ int i, rc = 0, load_code = 0;
DP(NETIF_MSG_IFUP, "Starting NIC load\n");
DP(NETIF_MSG_IFUP,
&bp->last_reported_link.link_report_flags);
bnx2x_release_phy_lock(bp);
- /* must be called before memory allocation and HW init */
- bnx2x_ilt_set_info(bp);
+ if (IS_PF(bp))
+ /* must be called before memory allocation and HW init */
+ bnx2x_ilt_set_info(bp);
/*
* Zero fastpath structures preserving invariants like napi, which are
/* Set the receive queues buffer size */
bnx2x_set_rx_buf_size(bp);
- if (bnx2x_alloc_mem(bp))
- return -ENOMEM;
+ if (IS_PF(bp)) {
+ rc = bnx2x_alloc_mem(bp);
+ if (rc) {
+ BNX2X_ERR("Unable to allocate bp memory\n");
+ return rc;
+ }
+ }
+
+ /* Allocated memory for FW statistics */
+ if (bnx2x_alloc_fw_stats_mem(bp))
+ LOAD_ERROR_EXIT(bp, load_error0);
+
+ /* need to be done after alloc mem, since it's self adjusting to amount
+ * of memory available for RSS queues
+ */
+ rc = bnx2x_alloc_fp_mem(bp);
+ if (rc) {
+ BNX2X_ERR("Unable to allocate memory for fps\n");
+ LOAD_ERROR_EXIT(bp, load_error0);
+ }
/* As long as bnx2x_alloc_mem() may possibly update
* bp->num_queues, bnx2x_set_real_num_queues() should always
DP(NETIF_MSG_IFUP, "napi added\n");
bnx2x_napi_enable(bp);
- /* set pf load just before approaching the MCP */
- bnx2x_set_pf_load(bp);
-
- /* Send LOAD_REQUEST command to MCP
- * Returns the type of LOAD command:
- * if it is the first port to be initialized
- * common blocks should be initialized, otherwise - not
- */
- if (!BP_NOMCP(bp)) {
- /* init fw_seq */
- bp->fw_seq =
- (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
- DRV_MSG_SEQ_NUMBER_MASK);
- BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
-
- /* Get current FW pulse sequence */
- bp->fw_drv_pulse_wr_seq =
- (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb) &
- DRV_PULSE_SEQ_MASK);
- BNX2X_DEV_INFO("drv_pulse 0x%x\n", bp->fw_drv_pulse_wr_seq);
-
- load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ,
- DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
- if (!load_code) {
- BNX2X_ERR("MCP response failure, aborting\n");
- rc = -EBUSY;
- LOAD_ERROR_EXIT(bp, load_error1);
- }
- if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
- BNX2X_ERR("Driver load refused\n");
- rc = -EBUSY; /* other port in diagnostic mode */
- LOAD_ERROR_EXIT(bp, load_error1);
- }
- if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP &&
- load_code != FW_MSG_CODE_DRV_LOAD_COMMON) {
- /* abort nic load if version mismatch */
- if (!bnx2x_test_firmware_version(bp, true)) {
- rc = -EBUSY;
+ if (IS_PF(bp)) {
+ /* set pf load just before approaching the MCP */
+ bnx2x_set_pf_load(bp);
+
+ /* if mcp exists send load request and analyze response */
+ if (!BP_NOMCP(bp)) {
+ /* attempt to load pf */
+ rc = bnx2x_nic_load_request(bp, &load_code);
+ if (rc)
+ LOAD_ERROR_EXIT(bp, load_error1);
+
+ /* what did mcp say? */
+ rc = bnx2x_nic_load_analyze_req(bp, load_code);
+ if (rc) {
+ bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
LOAD_ERROR_EXIT(bp, load_error2);
}
+ } else {
+ load_code = bnx2x_nic_load_no_mcp(bp, port);
}
- } else {
- int path = BP_PATH(bp);
-
- DP(NETIF_MSG_IFUP, "NO MCP - load counts[%d] %d, %d, %d\n",
- path, load_count[path][0], load_count[path][1],
- load_count[path][2]);
- load_count[path][0]++;
- load_count[path][1 + port]++;
- DP(NETIF_MSG_IFUP, "NO MCP - new load counts[%d] %d, %d, %d\n",
- path, load_count[path][0], load_count[path][1],
- load_count[path][2]);
- if (load_count[path][0] == 1)
- load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
- else if (load_count[path][1 + port] == 1)
- load_code = FW_MSG_CODE_DRV_LOAD_PORT;
- else
- load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
- }
+ /* mark pmf if applicable */
+ bnx2x_nic_load_pmf(bp, load_code);
- if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
- (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) ||
- (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) {
- bp->port.pmf = 1;
- /*
- * We need the barrier to ensure the ordering between the
- * writing to bp->port.pmf here and reading it from the
- * bnx2x_periodic_task().
- */
- smp_mb();
- } else
- bp->port.pmf = 0;
-
- DP(NETIF_MSG_IFUP, "pmf %d\n", bp->port.pmf);
+ /* Init Function state controlling object */
+ bnx2x__init_func_obj(bp);
- /* Init Function state controlling object */
- bnx2x__init_func_obj(bp);
-
- /* Initialize HW */
- rc = bnx2x_init_hw(bp, load_code);
- if (rc) {
- BNX2X_ERR("HW init failed, aborting\n");
- bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
- LOAD_ERROR_EXIT(bp, load_error2);
+ /* Initialize HW */
+ rc = bnx2x_init_hw(bp, load_code);
+ if (rc) {
+ BNX2X_ERR("HW init failed, aborting\n");
+ bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
+ LOAD_ERROR_EXIT(bp, load_error2);
+ }
}
/* Connect to IRQs */
rc = bnx2x_setup_irqs(bp);
if (rc) {
- BNX2X_ERR("IRQs setup failed\n");
- bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
+ BNX2X_ERR("setup irqs failed\n");
+ if (IS_PF(bp))
+ bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
LOAD_ERROR_EXIT(bp, load_error2);
}
bnx2x_nic_init(bp, load_code);
/* Init per-function objects */
- bnx2x_init_bp_objs(bp);
-
- if (((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
- (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP)) &&
- (bp->common.shmem2_base)) {
- if (SHMEM2_HAS(bp, dcc_support))
- SHMEM2_WR(bp, dcc_support,
- (SHMEM_DCC_SUPPORT_DISABLE_ENABLE_PF_TLV |
- SHMEM_DCC_SUPPORT_BANDWIDTH_ALLOCATION_TLV));
- if (SHMEM2_HAS(bp, afex_driver_support))
- SHMEM2_WR(bp, afex_driver_support,
- SHMEM_AFEX_SUPPORTED_VERSION_ONE);
- }
+ if (IS_PF(bp)) {
+ bnx2x_init_bp_objs(bp);
- /* Set AFEX default VLAN tag to an invalid value */
- bp->afex_def_vlan_tag = -1;
- bp->state = BNX2X_STATE_OPENING_WAIT4_PORT;
- rc = bnx2x_func_start(bp);
- if (rc) {
- BNX2X_ERR("Function start failed!\n");
- bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
- LOAD_ERROR_EXIT(bp, load_error3);
- }
+ /* Set AFEX default VLAN tag to an invalid value */
+ bp->afex_def_vlan_tag = -1;
+ bnx2x_nic_load_afex_dcc(bp, load_code);
+ bp->state = BNX2X_STATE_OPENING_WAIT4_PORT;
+ rc = bnx2x_func_start(bp);
+ if (rc) {
+ BNX2X_ERR("Function start failed!\n");
+ bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
- /* Send LOAD_DONE command to MCP */
- if (!BP_NOMCP(bp)) {
- load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
- if (!load_code) {
- BNX2X_ERR("MCP response failure, aborting\n");
- rc = -EBUSY;
LOAD_ERROR_EXIT(bp, load_error3);
}
- }
- rc = bnx2x_setup_leading(bp);
- if (rc) {
- BNX2X_ERR("Setup leading failed!\n");
- LOAD_ERROR_EXIT(bp, load_error3);
- }
+ /* Send LOAD_DONE command to MCP */
+ if (!BP_NOMCP(bp)) {
+ load_code = bnx2x_fw_command(bp,
+ DRV_MSG_CODE_LOAD_DONE, 0);
+ if (!load_code) {
+ BNX2X_ERR("MCP response failure, aborting\n");
+ rc = -EBUSY;
+ LOAD_ERROR_EXIT(bp, load_error3);
+ }
+ }
- for_each_nondefault_eth_queue(bp, i) {
- rc = bnx2x_setup_queue(bp, &bp->fp[i], 0);
+ /* setup the leading queue */
+ rc = bnx2x_setup_leading(bp);
if (rc) {
- BNX2X_ERR("Queue setup failed\n");
+ BNX2X_ERR("Setup leading failed!\n");
LOAD_ERROR_EXIT(bp, load_error3);
}
- }
- rc = bnx2x_init_rss_pf(bp);
- if (rc) {
- BNX2X_ERR("PF RSS init failed\n");
- LOAD_ERROR_EXIT(bp, load_error3);
+ /* set up the rest of the queues */
+ for_each_nondefault_eth_queue(bp, i) {
+ rc = bnx2x_setup_queue(bp, &bp->fp[i], 0);
+ if (rc) {
+ BNX2X_ERR("Queue setup failed\n");
+ LOAD_ERROR_EXIT(bp, load_error3);
+ }
+ }
+
+ /* setup rss */
+ rc = bnx2x_init_rss_pf(bp);
+ if (rc) {
+ BNX2X_ERR("PF RSS init failed\n");
+ LOAD_ERROR_EXIT(bp, load_error3);
+ }
}
/* Now when Clients are configured we are ready to work */
bp->state = BNX2X_STATE_OPEN;
/* Configure a ucast MAC */
- rc = bnx2x_set_eth_mac(bp, true);
+ if (IS_PF(bp))
+ rc = bnx2x_set_eth_mac(bp, true);
if (rc) {
BNX2X_ERR("Setting Ethernet MAC failed\n");
LOAD_ERROR_EXIT(bp, load_error3);
}
- if (bp->pending_max) {
+ if (IS_PF(bp) && bp->pending_max) {
bnx2x_update_max_mf_config(bp, bp->pending_max);
bp->pending_max = 0;
}
- if (bp->port.pmf)
- bnx2x_initial_phy_init(bp, load_mode);
+ if (bp->port.pmf) {
+ rc = bnx2x_initial_phy_init(bp, load_mode);
+ if (rc)
+ LOAD_ERROR_EXIT(bp, load_error3);
+ }
bp->link_params.feature_config_flags &= ~FEATURE_CONFIG_BOOT_FROM_SAN;
/* Start fast path */
if (CNIC_ENABLED(bp))
bnx2x_load_cnic(bp);
- /* mark driver is loaded in shmem2 */
- if (SHMEM2_HAS(bp, drv_capabilities_flag)) {
+ if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) {
+ /* mark driver is loaded in shmem2 */
u32 val;
val = SHMEM2_RD(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)]);
SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)],
}
/* Wait for all pending SP commands to complete */
- if (!bnx2x_wait_sp_comp(bp, ~0x0UL)) {
+ if (IS_PF(bp) && !bnx2x_wait_sp_comp(bp, ~0x0UL)) {
BNX2X_ERR("Timeout waiting for SP elements to complete\n");
bnx2x_nic_unload(bp, UNLOAD_CLOSE, false);
return -EBUSY;
#ifndef BNX2X_STOP_ON_ERROR
load_error3:
- bnx2x_int_disable_sync(bp, 1);
+ if (IS_PF(bp)) {
+ bnx2x_int_disable_sync(bp, 1);
- /* Clean queueable objects */
- bnx2x_squeeze_objects(bp);
+ /* Clean queueable objects */
+ bnx2x_squeeze_objects(bp);
+ }
/* Free SKBs, SGEs, TPA pool and driver internals */
bnx2x_free_skbs(bp);
/* Release IRQs */
bnx2x_free_irq(bp);
load_error2:
- if (!BP_NOMCP(bp)) {
+ if (IS_PF(bp) && !BP_NOMCP(bp)) {
bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
}
bp->port.pmf = 0;
load_error1:
bnx2x_napi_disable(bp);
+
/* clear pf_load status, as it was already set */
- bnx2x_clear_pf_load(bp);
+ if (IS_PF(bp))
+ bnx2x_clear_pf_load(bp);
load_error0:
+ bnx2x_free_fp_mem(bp);
+ bnx2x_free_fw_stats_mem(bp);
bnx2x_free_mem(bp);
return rc;
#endif /* ! BNX2X_STOP_ON_ERROR */
}
+static int bnx2x_drain_tx_queues(struct bnx2x *bp)
+{
+ u8 rc = 0, cos, i;
+
+ /* Wait until tx fastpath tasks complete */
+ for_each_tx_queue(bp, i) {
+ struct bnx2x_fastpath *fp = &bp->fp[i];
+
+ for_each_cos_in_tx_queue(fp, cos)
+ rc = bnx2x_clean_tx_queue(bp, fp->txdata_ptr[cos]);
+ if (rc)
+ return rc;
+ }
+ return 0;
+}
+
/* must be called with rtnl_lock */
int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link)
{
DP(NETIF_MSG_IFUP, "Starting NIC unload\n");
/* mark driver is unloaded in shmem2 */
- if (SHMEM2_HAS(bp, drv_capabilities_flag)) {
+ if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) {
u32 val;
val = SHMEM2_RD(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)]);
SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)],
val & ~DRV_FLAGS_CAPABILITIES_LOADED_L2);
}
- if ((bp->state == BNX2X_STATE_CLOSED) ||
- (bp->state == BNX2X_STATE_ERROR)) {
+ if (IS_PF(bp) &&
+ (bp->state == BNX2X_STATE_CLOSED ||
+ bp->state == BNX2X_STATE_ERROR)) {
/* We can get here if the driver has been unloaded
* during parity error recovery and is either waiting for a
* leader to complete or for other functions to unload and
del_timer_sync(&bp->timer);
- /* Set ALWAYS_ALIVE bit in shmem */
- bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
-
- bnx2x_drv_pulse(bp);
+ if (IS_PF(bp)) {
+ /* Set ALWAYS_ALIVE bit in shmem */
+ bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
+ bnx2x_drv_pulse(bp);
+ bnx2x_stats_handle(bp, STATS_EVENT_STOP);
+ bnx2x_save_statistics(bp);
+ }
- bnx2x_stats_handle(bp, STATS_EVENT_STOP);
- bnx2x_save_statistics(bp);
+ /* wait till consumers catch up with producers in all queues */
+ bnx2x_drain_tx_queues(bp);
/* Cleanup the chip if needed */
if (unload_mode != UNLOAD_RECOVERY)
* At this stage no more interrupts will arrive so we may safly clean
* the queueable objects here in case they failed to get cleaned so far.
*/
- bnx2x_squeeze_objects(bp);
+ if (IS_PF(bp))
+ bnx2x_squeeze_objects(bp);
/* There should be no more pending SP commands at this stage */
bp->sp_state = 0;
for_each_rx_queue(bp, i)
bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
- if (CNIC_LOADED(bp)) {
+ bnx2x_free_fp_mem(bp);
+ if (CNIC_LOADED(bp))
bnx2x_free_fp_mem_cnic(bp);
- bnx2x_free_mem_cnic(bp);
- }
- bnx2x_free_mem(bp);
+ if (IS_PF(bp)) {
+ bnx2x_free_mem(bp);
+ if (CNIC_LOADED(bp))
+ bnx2x_free_mem_cnic(bp);
+ }
bp->state = BNX2X_STATE_CLOSED;
bp->cnic_loaded = false;
/* Check if there are pending parity attentions. If there are - set
* RECOVERY_IN_PROGRESS.
*/
- if (bnx2x_chk_parity_attn(bp, &global, false)) {
+ if (IS_PF(bp) && bnx2x_chk_parity_attn(bp, &global, false)) {
bnx2x_set_reset_in_progress(bp);
/* Set RESET_IS_GLOBAL if needed */
/* The last driver must disable a "close the gate" if there is no
* parity attention or "process kill" pending.
*/
- if (!bnx2x_clear_pf_load(bp) && bnx2x_reset_is_done(bp, BP_PATH(bp)))
+ if (IS_PF(bp) &&
+ !bnx2x_clear_pf_load(bp) &&
+ bnx2x_reset_is_done(bp, BP_PATH(bp)))
bnx2x_disable_close_the_gate(bp);
DP(NETIF_MSG_IFUP, "Ending NIC unload\n");
return;
/* read updated dcb configuration */
- bnx2x_dcbx_pmf_update(bp);
-
- bnx2x_link_status_update(&bp->link_params, &bp->link_vars);
+ if (IS_PF(bp)) {
+ bnx2x_dcbx_pmf_update(bp);
+ bnx2x_link_status_update(&bp->link_params, &bp->link_vars);
+ if (bp->link_vars.link_up)
+ bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
+ else
+ bnx2x_stats_handle(bp, STATS_EVENT_STOP);
+ /* indicate link status */
+ bnx2x_link_report(bp);
- if (bp->link_vars.link_up)
+ } else { /* VF */
+ bp->port.supported[0] |= (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_2500baseX_Full |
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_TP |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ bp->port.advertising[0] = bp->port.supported[0];
+
+ bp->link_params.bp = bp;
+ bp->link_params.port = BP_PORT(bp);
+ bp->link_params.req_duplex[0] = DUPLEX_FULL;
+ bp->link_params.req_flow_ctrl[0] = BNX2X_FLOW_CTRL_NONE;
+ bp->link_params.req_line_speed[0] = SPEED_10000;
+ bp->link_params.speed_cap_mask[0] = 0x7f0000;
+ bp->link_params.switch_cfg = SWITCH_CFG_10G;
+ bp->link_vars.mac_type = MAC_TYPE_BMAC;
+ bp->link_vars.line_speed = SPEED_10000;
+ bp->link_vars.link_status =
+ (LINK_STATUS_LINK_UP |
+ LINK_STATUS_SPEED_AND_DUPLEX_10GTFD);
+ bp->link_vars.link_up = 1;
+ bp->link_vars.duplex = DUPLEX_FULL;
+ bp->link_vars.flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+ __bnx2x_link_report(bp);
bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
- else
- bnx2x_stats_handle(bp, STATS_EVENT_STOP);
-
- /* indicate link status */
- bnx2x_link_report(bp);
+ }
}
static int bnx2x_afex_func_update(struct bnx2x *bp, u16 vifid,
cids[cos] = fp->txdata_ptr[cos]->cid;
}
+ /* nothing more for vf to do here */
+ if (IS_VF(bp))
+ return;
+
+ bnx2x_init_sb(bp, fp->status_blk_mapping, BNX2X_VF_ID_INVALID, false,
+ fp->fw_sb_id, fp->igu_sb_id);
+ bnx2x_update_fpsb_idx(fp);
bnx2x_init_queue_obj(bp, &bnx2x_sp_obj(bp, fp).q_obj, fp->cl_id, cids,
fp->max_cos, BP_FUNC(bp), bnx2x_sp(bp, q_rdata),
bnx2x_sp_mapping(bp, q_rdata), q_type);
*/
bnx2x_init_vlan_mac_fp_objs(fp, BNX2X_OBJ_TYPE_RX_TX);
- DP(NETIF_MSG_IFUP, "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n",
- fp_idx, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id,
- fp->igu_sb_id);
- bnx2x_init_sb(bp, fp->status_blk_mapping, BNX2X_VF_ID_INVALID, false,
- fp->fw_sb_id, fp->igu_sb_id);
-
- bnx2x_update_fpsb_idx(fp);
+ DP(NETIF_MSG_IFUP,
+ "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d fw_sb %d igu_sb %d\n",
+ fp_idx, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id,
+ fp->igu_sb_id);
}
static void bnx2x_init_tx_ring_one(struct bnx2x_fp_txdata *txdata)
for_each_eth_queue(bp, i)
bnx2x_init_eth_fp(bp, i);
+
+ /* ensure status block indices were read */
+ rmb();
+ bnx2x_init_rx_rings(bp);
+ bnx2x_init_tx_rings(bp);
+
+ if (IS_VF(bp))
+ return;
+
/* Initialize MOD_ABS interrupts */
bnx2x_init_mod_abs_int(bp, &bp->link_vars, bp->common.chip_id,
bp->common.shmem_base, bp->common.shmem2_base,
BP_PORT(bp));
- /* ensure status block indices were read */
- rmb();
bnx2x_init_def_sb(bp);
bnx2x_update_dsb_idx(bp);
- bnx2x_init_rx_rings(bp);
- bnx2x_init_tx_rings(bp);
bnx2x_init_sp_ring(bp);
bnx2x_init_eq_ring(bp);
bnx2x_init_internal(bp, load_code);
* the one required, then FLR will be sufficient to clean any residue
* left by previous driver
*/
- rc = bnx2x_test_firmware_version(bp, false);
+ rc = bnx2x_nic_load_analyze_req(bp, FW_MSG_CODE_DRV_LOAD_FUNCTION);
if (!rc) {
/* fw version is good */
bnx2x_set_power_state(bp, PCI_D0);
- other_load_status = bnx2x_get_load_status(bp, other_engine);
- load_status = bnx2x_get_load_status(bp, BP_PATH(bp));
-
- /*
- * If parity had happen during the unload, then attentions
+ /* If parity had happen during the unload, then attentions
* and/or RECOVERY_IN_PROGRES may still be set. In this case we
* want the first function loaded on the current engine to
* complete the recovery.
+ * Parity recovery is only relevant for PF driver.
*/
- if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) ||
- bnx2x_chk_parity_attn(bp, &global, true))
- do {
- /*
- * If there are attentions and they are in a global
- * blocks, set the GLOBAL_RESET bit regardless whether
- * it will be this function that will complete the
- * recovery or not.
- */
- if (global)
- bnx2x_set_reset_global(bp);
+ if (IS_PF(bp)) {
+ other_load_status = bnx2x_get_load_status(bp, other_engine);
+ load_status = bnx2x_get_load_status(bp, BP_PATH(bp));
+ if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) ||
+ bnx2x_chk_parity_attn(bp, &global, true)) {
+ do {
+ /* If there are attentions and they are in a
+ * global blocks, set the GLOBAL_RESET bit
+ * regardless whether it will be this function
+ * that will complete the recovery or not.
+ */
+ if (global)
+ bnx2x_set_reset_global(bp);
- /*
- * Only the first function on the current engine should
- * try to recover in open. In case of attentions in
- * global blocks only the first in the chip should try
- * to recover.
- */
- if ((!load_status &&
- (!global || !other_load_status)) &&
- bnx2x_trylock_leader_lock(bp) &&
- !bnx2x_leader_reset(bp)) {
- netdev_info(bp->dev, "Recovered in open\n");
- break;
- }
+ /* Only the first function on the current
+ * engine should try to recover in open. In case
+ * of attentions in global blocks only the first
+ * in the chip should try to recover.
+ */
+ if ((!load_status &&
+ (!global || !other_load_status)) &&
+ bnx2x_trylock_leader_lock(bp) &&
+ !bnx2x_leader_reset(bp)) {
+ netdev_info(bp->dev,
+ "Recovered in open\n");
+ break;
+ }
- /* recovery has failed... */
- bnx2x_set_power_state(bp, PCI_D3hot);
- bp->recovery_state = BNX2X_RECOVERY_FAILED;
+ /* recovery has failed... */
+ bnx2x_set_power_state(bp, PCI_D3hot);
+ bp->recovery_state = BNX2X_RECOVERY_FAILED;
- BNX2X_ERR("Recovery flow hasn't been properly completed yet. Try again later.\n"
- "If you still see this message after a few retries then power cycle is required.\n");
+ BNX2X_ERR("Recovery flow hasn't been properly completed yet. Try again later.\n"
+ "If you still see this message after a few retries then power cycle is required.\n");
- return -EAGAIN;
- } while (0);
+ return -EAGAIN;
+ } while (0);
+ }
+ }
bp->recovery_state = BNX2X_RECOVERY_DONE;
return bnx2x_nic_load(bp, LOAD_OPEN);
projects / openwrt / staging / blogic.git / commitdiff