Part 1: Configuration files and Makefiles.
From: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
source "drivers/i2c/Kconfig"
+source "drivers/hwmon/Kconfig"
+
#source "drivers/l3/Kconfig"
source "drivers/misc/Kconfig"
source "drivers/i2c/Kconfig"
+source "drivers/hwmon/Kconfig"
+
source "drivers/usb/Kconfig"
endmenu
source "drivers/i2c/Kconfig"
+source "drivers/hwmon/Kconfig"
+
source "fs/Kconfig"
source "drivers/media/Kconfig"
source "drivers/w1/Kconfig"
+source "drivers/hwmon/Kconfig"
+
source "drivers/misc/Kconfig"
source "drivers/media/Kconfig"
obj-$(CONFIG_I2O) += message/
obj-$(CONFIG_I2C) += i2c/
obj-$(CONFIG_W1) += w1/
+obj-$(CONFIG_HWMON) += hwmon/
obj-$(CONFIG_PHONE) += telephony/
obj-$(CONFIG_MD) += md/
obj-$(CONFIG_BT) += bluetooth/
--- /dev/null
+#
+# I2C Sensor chip drivers configuration
+#
+
+menu "Hardware Monitoring support"
+
+config HWMON
+ tristate "Hardware Monitoring support"
+ default y
+ help
+ Hardware monitoring devices let you monitor the hardware health
+ of a system. Most modern motherboards include such a device. It
+ can include temperature sensors, voltage sensors, fan speed
+ sensors and various additional features such as the ability to
+ control the speed of the fans.
+
+config SENSORS_ADM1021
+ tristate "Analog Devices ADM1021 and compatibles"
+ depends on HWMON && I2C
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for Analog Devices ADM1021
+ and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
+ Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
+ and the XEON processor built-in sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called adm1021.
+
+config SENSORS_ADM1025
+ tristate "Analog Devices ADM1025 and compatibles"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for Analog Devices ADM1025
+ and Philips NE1619 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adm1025.
+
+config SENSORS_ADM1026
+ tristate "Analog Devices ADM1026 and compatibles"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for Analog Devices ADM1026
+ sensor chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called adm1026.
+
+config SENSORS_ADM1031
+ tristate "Analog Devices ADM1031 and compatibles"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for Analog Devices ADM1031
+ and ADM1030 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adm1031.
+
+config SENSORS_ADM9240
+ tristate "Analog Devices ADM9240 and compatibles"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for Analog Devices ADM9240,
+ Dallas DS1780, National Semiconductor LM81 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adm9240.
+
+config SENSORS_ASB100
+ tristate "Asus ASB100 Bach"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for the ASB100 Bach sensor
+ chip found on some Asus mainboards.
+
+ This driver can also be built as a module. If so, the module
+ will be called asb100.
+
+config SENSORS_ATXP1
+ tristate "Attansic ATXP1 VID controller"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for the Attansic ATXP1 VID
+ controller.
+
+ If your board have such a chip, you are able to control your CPU
+ core and other voltages.
+
+ This driver can also be built as a module. If so, the module
+ will be called atxp1.
+
+config SENSORS_DS1621
+ tristate "Dallas Semiconductor DS1621 and DS1625"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for Dallas Semiconductor
+ DS1621 and DS1625 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called ds1621.
+
+config SENSORS_FSCHER
+ tristate "FSC Hermes"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for Fujitsu Siemens
+ Computers Hermes sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called fscher.
+
+config SENSORS_FSCPOS
+ tristate "FSC Poseidon"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for Fujitsu Siemens
+ Computers Poseidon sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called fscpos.
+
+config SENSORS_GL518SM
+ tristate "Genesys Logic GL518SM"
+ depends on HWMON && I2C
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for Genesys Logic GL518SM
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called gl518sm.
+
+config SENSORS_GL520SM
+ tristate "Genesys Logic GL520SM"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for Genesys Logic GL520SM
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called gl520sm.
+
+config SENSORS_IT87
+ tristate "ITE IT87xx and compatibles"
+ depends on HWMON && I2C
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for ITE IT87xx sensor chips
+ and clones: SiS960.
+
+ This driver can also be built as a module. If so, the module
+ will be called it87.
+
+config SENSORS_LM63
+ tristate "National Semiconductor LM63"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for the National Semiconductor
+ LM63 remote diode digital temperature sensor with integrated fan
+ control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
+ motherboard, among others.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm63.
+
+config SENSORS_LM75
+ tristate "National Semiconductor LM75 and compatibles"
+ depends on HWMON && I2C
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for National Semiconductor LM75
+ sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
+ 9-bit precision mode), and TelCom (now Microchip) TCN75.
+
+ The DS75 and DS1775 in 10- to 12-bit precision modes will require
+ a force module parameter. The driver will not handle the extra
+ precision anyhow.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm75.
+
+config SENSORS_LM77
+ tristate "National Semiconductor LM77"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for National Semiconductor LM77
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm77.
+
+config SENSORS_LM78
+ tristate "National Semiconductor LM78 and compatibles"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for National Semiconductor LM78,
+ LM78-J and LM79.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm78.
+
+config SENSORS_LM80
+ tristate "National Semiconductor LM80"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for National Semiconductor
+ LM80 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm80.
+
+config SENSORS_LM83
+ tristate "National Semiconductor LM83"
+ depends on HWMON && I2C
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for National Semiconductor
+ LM83 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm83.
+
+config SENSORS_LM85
+ tristate "National Semiconductor LM85 and compatibles"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for National Semiconductor LM85
+ sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm85.
+
+config SENSORS_LM87
+ tristate "National Semiconductor LM87"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for National Semiconductor LM87
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm87.
+
+config SENSORS_LM90
+ tristate "National Semiconductor LM90 and compatibles"
+ depends on HWMON && I2C
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for National Semiconductor LM90,
+ LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
+ MAX6658 sensor chips.
+
+ The Analog Devices ADT7461 sensor chip is also supported, but only
+ if found in ADM1032 compatibility mode.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm90.
+
+config SENSORS_LM92
+ tristate "National Semiconductor LM92 and compatibles"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for National Semiconductor LM92
+ and Maxim MAX6635 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm92.
+
+config SENSORS_MAX1619
+ tristate "Maxim MAX1619 sensor chip"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for MAX1619 sensor chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called max1619.
+
+config SENSORS_PC87360
+ tristate "National Semiconductor PC87360 family"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ select I2C_ISA
+ help
+ If you say yes here you get access to the hardware monitoring
+ functions of the National Semiconductor PC8736x Super-I/O chips.
+ The PC87360, PC87363 and PC87364 only have fan monitoring and
+ control. The PC87365 and PC87366 additionally have voltage and
+ temperature monitoring.
+
+ This driver can also be built as a module. If so, the module
+ will be called pc87360.
+
+config SENSORS_SIS5595
+ tristate "Silicon Integrated Systems Corp. SiS5595"
+ depends on HWMON && I2C && PCI && EXPERIMENTAL
+ select I2C_SENSOR
+ select I2C_ISA
+ help
+ If you say yes here you get support for the integrated sensors in
+ SiS5595 South Bridges.
+
+ This driver can also be built as a module. If so, the module
+ will be called sis5595.
+
+config SENSORS_SMSC47M1
+ tristate "SMSC LPC47M10x and compatibles"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ select I2C_ISA
+ help
+ If you say yes here you get support for the integrated fan
+ monitoring and control capabilities of the SMSC LPC47B27x,
+ LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called smsc47m1.
+
+config SENSORS_SMSC47B397
+ tristate "SMSC LPC47B397-NC"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ select I2C_ISA
+ help
+ If you say yes here you get support for the SMSC LPC47B397-NC
+ sensor chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called smsc47b397.
+
+config SENSORS_VIA686A
+ tristate "VIA686A"
+ depends on HWMON && I2C && PCI
+ select I2C_SENSOR
+ select I2C_ISA
+ help
+ If you say yes here you get support for the integrated sensors in
+ Via 686A/B South Bridges.
+
+ This driver can also be built as a module. If so, the module
+ will be called via686a.
+
+config SENSORS_W83781D
+ tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
+ depends on HWMON && I2C
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for the Winbond W8378x series
+ of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
+ and the similar Asus AS99127F.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83781d.
+
+config SENSORS_W83L785TS
+ tristate "Winbond W83L785TS-S"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ help
+ If you say yes here you get support for the Winbond W83L785TS-S
+ sensor chip, which is used on the Asus A7N8X, among other
+ motherboards.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83l785ts.
+
+config SENSORS_W83627HF
+ tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ select I2C_ISA
+ help
+ If you say yes here you get support for the Winbond W836X7 series
+ of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
+
+ This driver can also be built as a module. If so, the module
+ will be called w83627hf.
+
+config SENSORS_W83627EHF
+ tristate "Winbond W83627EHF"
+ depends on HWMON && I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ select I2C_ISA
+ help
+ If you say yes here you get preliminary support for the hardware
+ monitoring functionality of the Winbond W83627EHF Super-I/O chip.
+ Only fan and temperature inputs are supported at the moment, while
+ the chip does much more than that.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83627ehf.
+
+config HWMON_DEBUG_CHIP
+ bool "Hardware Monitoring Chip debugging messages"
+ depends on HWMON
+ default n
+ help
+ Say Y here if you want the I2C chip drivers to produce a bunch of
+ debug messages to the system log. Select this if you are having
+ a problem with I2C support and want to see more of what is going
+ on.
+
+endmenu
--- /dev/null
+#
+# Makefile for sensor chip drivers.
+#
+
+# asb100, then w83781d go first, as they can override other drivers' addresses.
+obj-$(CONFIG_SENSORS_ASB100) += asb100.o
+obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o
+obj-$(CONFIG_SENSORS_W83781D) += w83781d.o
+
+obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o
+obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o
+obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o
+obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o
+obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
+obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
+obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
+obj-$(CONFIG_SENSORS_FSCHER) += fscher.o
+obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o
+obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
+obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
+obj-$(CONFIG_SENSORS_IT87) += it87.o
+obj-$(CONFIG_SENSORS_LM63) += lm63.o
+obj-$(CONFIG_SENSORS_LM75) += lm75.o
+obj-$(CONFIG_SENSORS_LM77) += lm77.o
+obj-$(CONFIG_SENSORS_LM78) += lm78.o
+obj-$(CONFIG_SENSORS_LM80) += lm80.o
+obj-$(CONFIG_SENSORS_LM83) += lm83.o
+obj-$(CONFIG_SENSORS_LM85) += lm85.o
+obj-$(CONFIG_SENSORS_LM87) += lm87.o
+obj-$(CONFIG_SENSORS_LM90) += lm90.o
+obj-$(CONFIG_SENSORS_LM92) += lm92.o
+obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
+obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
+obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
+obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
+obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
+obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
+obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
+obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
+
+ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
+
#
-# I2C Sensor and "other" chip configuration
+# Miscellaneous I2C chip drivers configuration
#
-menu "Hardware Sensors Chip support"
- depends on I2C
-
config I2C_SENSOR
tristate
default n
-config SENSORS_ADM1021
- tristate "Analog Devices ADM1021 and compatibles"
- depends on I2C
- select I2C_SENSOR
- help
- If you say yes here you get support for Analog Devices ADM1021
- and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
- Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
- and the XEON processor built-in sensor.
-
- This driver can also be built as a module. If so, the module
- will be called adm1021.
-
-config SENSORS_ADM1025
- tristate "Analog Devices ADM1025 and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Analog Devices ADM1025
- and Philips NE1619 sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called adm1025.
-
-config SENSORS_ADM1026
- tristate "Analog Devices ADM1026 and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Analog Devices ADM1026
- sensor chip.
-
- This driver can also be built as a module. If so, the module
- will be called adm1026.
-
-config SENSORS_ADM1031
- tristate "Analog Devices ADM1031 and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Analog Devices ADM1031
- and ADM1030 sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called adm1031.
-
-config SENSORS_ADM9240
- tristate "Analog Devices ADM9240 and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Analog Devices ADM9240,
- Dallas DS1780, National Semiconductor LM81 sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called adm9240.
-
-config SENSORS_ASB100
- tristate "Asus ASB100 Bach"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for the ASB100 Bach sensor
- chip found on some Asus mainboards.
-
- This driver can also be built as a module. If so, the module
- will be called asb100.
-
-config SENSORS_ATXP1
- tristate "Attansic ATXP1 VID controller"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for the Attansic ATXP1 VID
- controller.
-
- If your board have such a chip, you are able to control your CPU
- core and other voltages.
-
- This driver can also be built as a module. If so, the module
- will be called atxp1.
-
-config SENSORS_DS1621
- tristate "Dallas Semiconductor DS1621 and DS1625"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Dallas Semiconductor
- DS1621 and DS1625 sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called ds1621.
-
-config SENSORS_FSCHER
- tristate "FSC Hermes"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Fujitsu Siemens
- Computers Hermes sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called fscher.
-
-config SENSORS_FSCPOS
- tristate "FSC Poseidon"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Fujitsu Siemens
- Computers Poseidon sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called fscpos.
-
-config SENSORS_GL518SM
- tristate "Genesys Logic GL518SM"
- depends on I2C
- select I2C_SENSOR
- help
- If you say yes here you get support for Genesys Logic GL518SM
- sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called gl518sm.
-
-config SENSORS_GL520SM
- tristate "Genesys Logic GL520SM"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Genesys Logic GL520SM
- sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called gl520sm.
-
-config SENSORS_IT87
- tristate "ITE IT87xx and compatibles"
- depends on I2C
- select I2C_SENSOR
- help
- If you say yes here you get support for ITE IT87xx sensor chips
- and clones: SiS960.
-
- This driver can also be built as a module. If so, the module
- will be called it87.
-
-config SENSORS_LM63
- tristate "National Semiconductor LM63"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for the National Semiconductor
- LM63 remote diode digital temperature sensor with integrated fan
- control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
- motherboard, among others.
-
- This driver can also be built as a module. If so, the module
- will be called lm63.
-
-config SENSORS_LM75
- tristate "National Semiconductor LM75 and compatibles"
- depends on I2C
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor LM75
- sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
- 9-bit precision mode), and TelCom (now Microchip) TCN75.
-
- The DS75 and DS1775 in 10- to 12-bit precision modes will require
- a force module parameter. The driver will not handle the extra
- precision anyhow.
-
- This driver can also be built as a module. If so, the module
- will be called lm75.
-
-config SENSORS_LM77
- tristate "National Semiconductor LM77"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor LM77
- sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called lm77.
-
-config SENSORS_LM78
- tristate "National Semiconductor LM78 and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor LM78,
- LM78-J and LM79.
-
- This driver can also be built as a module. If so, the module
- will be called lm78.
-
-config SENSORS_LM80
- tristate "National Semiconductor LM80"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor
- LM80 sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called lm80.
-
-config SENSORS_LM83
- tristate "National Semiconductor LM83"
- depends on I2C
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor
- LM83 sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called lm83.
-
-config SENSORS_LM85
- tristate "National Semiconductor LM85 and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor LM85
- sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
-
- This driver can also be built as a module. If so, the module
- will be called lm85.
-
-config SENSORS_LM87
- tristate "National Semiconductor LM87"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor LM87
- sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called lm87.
-
-config SENSORS_LM90
- tristate "National Semiconductor LM90 and compatibles"
- depends on I2C
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor LM90,
- LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
- MAX6658 sensor chips.
-
- The Analog Devices ADT7461 sensor chip is also supported, but only
- if found in ADM1032 compatibility mode.
-
- This driver can also be built as a module. If so, the module
- will be called lm90.
-
-config SENSORS_LM92
- tristate "National Semiconductor LM92 and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor LM92
- and Maxim MAX6635 sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called lm92.
-
-config SENSORS_MAX1619
- tristate "Maxim MAX1619 sensor chip"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for MAX1619 sensor chip.
-
- This driver can also be built as a module. If so, the module
- will be called max1619.
-
-config SENSORS_PC87360
- tristate "National Semiconductor PC87360 family"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
- help
- If you say yes here you get access to the hardware monitoring
- functions of the National Semiconductor PC8736x Super-I/O chips.
- The PC87360, PC87363 and PC87364 only have fan monitoring and
- control. The PC87365 and PC87366 additionally have voltage and
- temperature monitoring.
-
- This driver can also be built as a module. If so, the module
- will be called pc87360.
-
-config SENSORS_SMSC47B397
- tristate "SMSC LPC47B397-NC"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
- help
- If you say yes here you get support for the SMSC LPC47B397-NC
- sensor chip.
-
- This driver can also be built as a module. If so, the module
- will be called smsc47b397.
-
-config SENSORS_SIS5595
- tristate "Silicon Integrated Systems Corp. SiS5595"
- depends on I2C && PCI && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
- help
- If you say yes here you get support for the integrated sensors in
- SiS5595 South Bridges.
-
- This driver can also be built as a module. If so, the module
- will be called sis5595.
-
-config SENSORS_SMSC47M1
- tristate "SMSC LPC47M10x and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
- help
- If you say yes here you get support for the integrated fan
- monitoring and control capabilities of the SMSC LPC47B27x,
- LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.
-
- This driver can also be built as a module. If so, the module
- will be called smsc47m1.
-
-config SENSORS_VIA686A
- tristate "VIA686A"
- depends on I2C && PCI
- select I2C_SENSOR
- select I2C_ISA
- help
- If you say yes here you get support for the integrated sensors in
- Via 686A/B South Bridges.
-
- This driver can also be built as a module. If so, the module
- will be called via686a.
-
-config SENSORS_W83781D
- tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
- depends on I2C
- select I2C_SENSOR
- help
- If you say yes here you get support for the Winbond W8378x series
- of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
- and the similar Asus AS99127F.
-
- This driver can also be built as a module. If so, the module
- will be called w83781d.
-
-config SENSORS_W83L785TS
- tristate "Winbond W83L785TS-S"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for the Winbond W83L785TS-S
- sensor chip, which is used on the Asus A7N8X, among other
- motherboards.
-
- This driver can also be built as a module. If so, the module
- will be called w83l785ts.
-
-config SENSORS_W83627HF
- tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
- help
- If you say yes here you get support for the Winbond W836X7 series
- of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
-
- This driver can also be built as a module. If so, the module
- will be called w83627hf.
-
-config SENSORS_W83627EHF
- tristate "Winbond W83627EHF"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
- help
- If you say yes here you get preliminary support for the hardware
- monitoring functionality of the Winbond W83627EHF Super-I/O chip.
- Only fan and temperature inputs are supported at the moment, while
- the chip does much more than that.
-
- This driver can also be built as a module. If so, the module
- will be called w83627ehf.
-
-endmenu
-
-menu "Other I2C Chip support"
+menu "Miscellaneous I2C Chip support"
depends on I2C
config SENSORS_DS1337
#
-# Makefile for sensor and "other" I2C chip drivers.
+# Makefile for miscellaneous I2C chip drivers.
#
-# asb100, then w83781d go first, as they can override other drivers' addresses.
-obj-$(CONFIG_SENSORS_ASB100) += asb100.o
-obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o
-obj-$(CONFIG_SENSORS_W83781D) += w83781d.o
-
-obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o
-obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o
-obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o
-obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o
-obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
-obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_DS1337) += ds1337.o
obj-$(CONFIG_SENSORS_DS1374) += ds1374.o
-obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
-obj-$(CONFIG_SENSORS_FSCHER) += fscher.o
-obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o
-obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
-obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
-obj-$(CONFIG_SENSORS_IT87) += it87.o
-obj-$(CONFIG_SENSORS_LM63) += lm63.o
-obj-$(CONFIG_SENSORS_LM75) += lm75.o
-obj-$(CONFIG_SENSORS_LM77) += lm77.o
-obj-$(CONFIG_SENSORS_LM78) += lm78.o
-obj-$(CONFIG_SENSORS_LM80) += lm80.o
-obj-$(CONFIG_SENSORS_LM83) += lm83.o
-obj-$(CONFIG_SENSORS_LM85) += lm85.o
-obj-$(CONFIG_SENSORS_LM87) += lm87.o
-obj-$(CONFIG_SENSORS_LM90) += lm90.o
-obj-$(CONFIG_SENSORS_LM92) += lm92.o
-obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
obj-$(CONFIG_SENSORS_M41T00) += m41t00.o
-obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o
-obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
-obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
-obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
-obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
-obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
-obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
-
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TPS65010) += tps65010.o
projects / openwrt / staging / blogic.git / commitdiff