Ingress padding boundary values got changed for T6.
T5: 0=32B 1=64B 2=128B 3=256B 4=512B 5=1024B 6=2048B 7=4096B
T6: 0=8B 1=16B 2=32B 3=64B 4=128B 5=128B 6=256B 7=512B
Updating the driver to set the correct boundary values in SGE_CONTROL to
32B.
Also, need to take care of this fl alignment change when calculating the
next packet offset.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
int t4_fwcache(struct adapter *adap, enum fw_params_param_dev_fwcache op);
int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
const u8 *fw_data, unsigned int size, int force);
+int t4_fl_pkt_align(struct adapter *adap);
unsigned int t4_flash_cfg_addr(struct adapter *adapter);
int t4_check_fw_version(struct adapter *adap);
int t4_get_fw_version(struct adapter *adapter, u32 *vers);
int t4_sge_init(struct adapter *adap)
{
struct sge *s = &adap->sge;
- u32 sge_control, sge_control2, sge_conm_ctrl;
- unsigned int ingpadboundary, ingpackboundary;
+ u32 sge_control, sge_conm_ctrl;
int ret, egress_threshold;
/*
s->pktshift = PKTSHIFT_G(sge_control);
s->stat_len = (sge_control & EGRSTATUSPAGESIZE_F) ? 128 : 64;
- /* T4 uses a single control field to specify both the PCIe Padding and
- * Packing Boundary. T5 introduced the ability to specify these
- * separately. The actual Ingress Packet Data alignment boundary
- * within Packed Buffer Mode is the maximum of these two
- * specifications. (Note that it makes no real practical sense to
- * have the Pading Boudary be larger than the Packing Boundary but you
- * could set the chip up that way and, in fact, legacy T4 code would
- * end doing this because it would initialize the Padding Boundary and
- * leave the Packing Boundary initialized to 0 (16 bytes).)
- */
- ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_control) +
- INGPADBOUNDARY_SHIFT_X);
- if (is_t4(adap->params.chip)) {
- s->fl_align = ingpadboundary;
- } else {
- /* T5 has a different interpretation of one of the PCIe Packing
- * Boundary values.
- */
- sge_control2 = t4_read_reg(adap, SGE_CONTROL2_A);
- ingpackboundary = INGPACKBOUNDARY_G(sge_control2);
- if (ingpackboundary == INGPACKBOUNDARY_16B_X)
- ingpackboundary = 16;
- else
- ingpackboundary = 1 << (ingpackboundary +
- INGPACKBOUNDARY_SHIFT_X);
-
- s->fl_align = max(ingpadboundary, ingpackboundary);
- }
-
+ s->fl_align = t4_fl_pkt_align(adap);
ret = t4_sge_init_soft(adap);
if (ret < 0)
return ret;
return t4_fw_restart(adap, mbox, reset);
}
+/**
+ * t4_fl_pkt_align - return the fl packet alignment
+ * @adap: the adapter
+ *
+ * T4 has a single field to specify the packing and padding boundary.
+ * T5 onwards has separate fields for this and hence the alignment for
+ * next packet offset is maximum of these two.
+ *
+ */
+int t4_fl_pkt_align(struct adapter *adap)
+{
+ u32 sge_control, sge_control2;
+ unsigned int ingpadboundary, ingpackboundary, fl_align, ingpad_shift;
+
+ sge_control = t4_read_reg(adap, SGE_CONTROL_A);
+
+ /* T4 uses a single control field to specify both the PCIe Padding and
+ * Packing Boundary. T5 introduced the ability to specify these
+ * separately. The actual Ingress Packet Data alignment boundary
+ * within Packed Buffer Mode is the maximum of these two
+ * specifications. (Note that it makes no real practical sense to
+ * have the Pading Boudary be larger than the Packing Boundary but you
+ * could set the chip up that way and, in fact, legacy T4 code would
+ * end doing this because it would initialize the Padding Boundary and
+ * leave the Packing Boundary initialized to 0 (16 bytes).)
+ * Padding Boundary values in T6 starts from 8B,
+ * where as it is 32B for T4 and T5.
+ */
+ if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
+ ingpad_shift = INGPADBOUNDARY_SHIFT_X;
+ else
+ ingpad_shift = T6_INGPADBOUNDARY_SHIFT_X;
+
+ ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_control) + ingpad_shift);
+
+ fl_align = ingpadboundary;
+ if (!is_t4(adap->params.chip)) {
+ /* T5 has a weird interpretation of one of the PCIe Packing
+ * Boundary values. No idea why ...
+ */
+ sge_control2 = t4_read_reg(adap, SGE_CONTROL2_A);
+ ingpackboundary = INGPACKBOUNDARY_G(sge_control2);
+ if (ingpackboundary == INGPACKBOUNDARY_16B_X)
+ ingpackboundary = 16;
+ else
+ ingpackboundary = 1 << (ingpackboundary +
+ INGPACKBOUNDARY_SHIFT_X);
+
+ fl_align = max(ingpadboundary, ingpackboundary);
+ }
+ return fl_align;
+}
+
/**
* t4_fixup_host_params - fix up host-dependent parameters
* @adap: the adapter
unsigned int stat_len = cache_line_size > 64 ? 128 : 64;
unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size;
unsigned int fl_align_log = fls(fl_align) - 1;
+ unsigned int ingpad;
t4_write_reg(adap, SGE_HOST_PAGE_SIZE_A,
HOSTPAGESIZEPF0_V(sge_hps) |
fl_align = 64;
fl_align_log = 6;
}
+
+ if (is_t5(adap->params.chip))
+ ingpad = INGPCIEBOUNDARY_32B_X;
+ else
+ ingpad = T6_INGPADBOUNDARY_32B_X;
+
t4_set_reg_field(adap, SGE_CONTROL_A,
INGPADBOUNDARY_V(INGPADBOUNDARY_M) |
EGRSTATUSPAGESIZE_F,
- INGPADBOUNDARY_V(INGPCIEBOUNDARY_32B_X) |
+ INGPADBOUNDARY_V(ingpad) |
EGRSTATUSPAGESIZE_V(stat_len != 64));
t4_set_reg_field(adap, SGE_CONTROL2_A,
INGPACKBOUNDARY_V(INGPACKBOUNDARY_M),
#define INGPADBOUNDARY_SHIFT_X 5
+#define T6_INGPADBOUNDARY_SHIFT_X 3
+#define T6_INGPADBOUNDARY_32B_X 2
+
/* CONTROL2 register */
#define INGPACKBOUNDARY_SHIFT_X 5
#define INGPACKBOUNDARY_16B_X 0
u32 fl0 = sge_params->sge_fl_buffer_size[0];
u32 fl1 = sge_params->sge_fl_buffer_size[1];
struct sge *s = &adapter->sge;
- unsigned int ingpadboundary, ingpackboundary;
+ unsigned int ingpadboundary, ingpackboundary, ingpad_shift;
/*
* Start by vetting the basic SGE parameters which have been set up by
* could set the chip up that way and, in fact, legacy T4 code would
* end doing this because it would initialize the Padding Boundary and
* leave the Packing Boundary initialized to 0 (16 bytes).)
+ * Padding Boundary values in T6 starts from 8B,
+ * where as it is 32B for T4 and T5.
*/
+ if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
+ ingpad_shift = INGPADBOUNDARY_SHIFT_X;
+ else
+ ingpad_shift = T6_INGPADBOUNDARY_SHIFT_X;
+
ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_params->sge_control) +
- INGPADBOUNDARY_SHIFT_X);
+ ingpad_shift);
if (is_t4(adapter->params.chip)) {
s->fl_align = ingpadboundary;
} else {
projects / openwrt / staging / blogic.git / commitdiff