--- /dev/null
+From a32de68edab7b73ded850bcf76cdf6858e92a7e5 Mon Sep 17 00:00:00 2001
+From: Dmitry Osipenko <digetx@gmail.com>
+Date: Sun, 15 Dec 2019 21:42:24 +0300
+Subject: [PATCH] brcmfmac: Keep OOB wake-interrupt disabled when it shouldn't
+ be enabled
+
+NVIDIA Tegra SoCs do not like when OOB wake is enabled and WiFi interface
+is in DOWN state during suspend. This results in a CPU hang on programming
+OOB wake-up state of the GPIO controller during of system's suspend.
+
+The solution is trivial: don't enable wake for the OOB interrupt when it
+should be disabled.
+
+This fixes hang on Tegra20 (Acer A500) and Tegra30 (Nexus 7) devices which
+are using BCM4329 and BCM4330 WiFi chips respectively.
+
+Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 10 +++++-----
+ .../net/wireless/broadcom/brcm80211/brcmfmac/sdio.h | 1 -
+ 2 files changed, 5 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+@@ -120,7 +120,7 @@ int brcmf_sdiod_intr_register(struct brc
+ brcmf_err("enable_irq_wake failed %d\n", ret);
+ return ret;
+ }
+- sdiodev->irq_wake = true;
++ disable_irq_wake(pdata->oob_irq_nr);
+
+ sdio_claim_host(sdiodev->func1);
+
+@@ -179,10 +179,6 @@ void brcmf_sdiod_intr_unregister(struct
+ sdio_release_host(sdiodev->func1);
+
+ sdiodev->oob_irq_requested = false;
+- if (sdiodev->irq_wake) {
+- disable_irq_wake(pdata->oob_irq_nr);
+- sdiodev->irq_wake = false;
+- }
+ free_irq(pdata->oob_irq_nr, &sdiodev->func1->dev);
+ sdiodev->irq_en = false;
+ sdiodev->oob_irq_requested = false;
+@@ -1173,6 +1169,10 @@ static int brcmf_ops_sdio_resume(struct
+ if (ret)
+ brcmf_err("Failed to probe device on resume\n");
+ } else {
++ if (sdiodev->wowl_enabled &&
++ sdiodev->settings->bus.sdio.oob_irq_supported)
++ disable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr);
++
+ brcmf_sdiod_freezer_off(sdiodev);
+ }
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+@@ -178,7 +178,6 @@ struct brcmf_sdio_dev {
+ bool sd_irq_requested;
+ bool irq_en; /* irq enable flags */
+ spinlock_t irq_en_lock;
+- bool irq_wake; /* irq wake enable flags */
+ bool sg_support;
+ uint max_request_size;
+ ushort max_segment_count;
--- /dev/null
+From 24332f8068ff6df7f16aefee45d514de1de4de80 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 26 Dec 2019 14:30:49 +0100
+Subject: [PATCH] brcmfmac: simplify building interface combinations
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Move similar/duplicated code out of combination specific code blocks.
+This simplifies code a bit and allows adding more combinations later.
+A list of combinations remains unchanged.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c | 43 ++++++-------------
+ 1 file changed, 14 insertions(+), 29 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -6479,12 +6479,13 @@ static int brcmf_setup_ifmodes(struct wi
+ struct ieee80211_iface_limit *c0_limits = NULL;
+ struct ieee80211_iface_limit *p2p_limits = NULL;
+ struct ieee80211_iface_limit *mbss_limits = NULL;
+- bool mbss, p2p, rsdb;
++ bool mbss, p2p, rsdb, mchan;
+ int i, c, n_combos;
+
+ mbss = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS);
+ p2p = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P);
+ rsdb = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_RSDB);
++ mchan = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN);
+
+ n_combos = 1 + !!(p2p && !rsdb) + !!mbss;
+ combo = kcalloc(n_combos, sizeof(*combo), GFP_KERNEL);
+@@ -6494,6 +6495,10 @@ static int brcmf_setup_ifmodes(struct wi
+ wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_AP);
++ if (p2p)
++ wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
++ BIT(NL80211_IFTYPE_P2P_GO) |
++ BIT(NL80211_IFTYPE_P2P_DEVICE);
+
+ c = 0;
+ i = 0;
+@@ -6505,48 +6510,28 @@ static int brcmf_setup_ifmodes(struct wi
+ c0_limits = kcalloc(2, sizeof(*c0_limits), GFP_KERNEL);
+ if (!c0_limits)
+ goto err;
+- if (p2p && rsdb) {
+- combo[c].num_different_channels = 2;
+- wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
+- BIT(NL80211_IFTYPE_P2P_GO) |
+- BIT(NL80211_IFTYPE_P2P_DEVICE);
+- c0_limits[i].max = 2;
+- c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
++
++ combo[c].num_different_channels = 1 + (rsdb || (p2p && mchan));
++ c0_limits[i].max = 1 + rsdb;
++ c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
++ if (p2p) {
+ c0_limits[i].max = 1;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
+- c0_limits[i].max = 2;
++ c0_limits[i].max = 1 + rsdb;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO);
++ }
++ if (p2p && rsdb) {
+ c0_limits[i].max = 2;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
+ combo[c].max_interfaces = 5;
+ } else if (p2p) {
+- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
+- combo[c].num_different_channels = 2;
+- else
+- combo[c].num_different_channels = 1;
+- c0_limits[i].max = 1;
+- c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
+- wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
+- BIT(NL80211_IFTYPE_P2P_GO) |
+- BIT(NL80211_IFTYPE_P2P_DEVICE);
+- c0_limits[i].max = 1;
+- c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
+- c0_limits[i].max = 1;
+- c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
+- BIT(NL80211_IFTYPE_P2P_GO);
+ combo[c].max_interfaces = i;
+ } else if (rsdb) {
+- combo[c].num_different_channels = 2;
+- c0_limits[i].max = 2;
+- c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
+ c0_limits[i].max = 2;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
+ combo[c].max_interfaces = 3;
+ } else {
+- combo[c].num_different_channels = 1;
+- c0_limits[i].max = 1;
+- c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
+ c0_limits[i].max = 1;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
+ combo[c].max_interfaces = i;
--- /dev/null
+From 20f2c5fa3af060401c72e444999470a4cab641cf Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 26 Dec 2019 14:30:50 +0100
+Subject: [PATCH] brcmfmac: add initial support for monitor mode
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Report monitor interface availability using cfg80211 and support it in
+the add_virtual_intf() and del_virtual_intf() callbacks. This new
+feature is conditional and depends on firmware flagging monitor packets.
+Receiving monitor frames is already handled by the brcmf_netif_mon_rx().
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c | 112 ++++++++++++++++--
+ .../broadcom/brcm80211/brcmfmac/core.c | 68 ++++++++++-
+ .../broadcom/brcm80211/brcmfmac/core.h | 2 +
+ .../broadcom/brcm80211/brcmfmac/feature.c | 1 +
+ .../broadcom/brcm80211/brcmfmac/feature.h | 2 +
+ .../broadcom/brcm80211/brcmfmac/fwil.h | 2 +
+ 6 files changed, 174 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -11,6 +11,7 @@
+ #include <linux/vmalloc.h>
+ #include <net/cfg80211.h>
+ #include <net/netlink.h>
++#include <uapi/linux/if_arp.h>
+
+ #include <brcmu_utils.h>
+ #include <defs.h>
+@@ -619,6 +620,82 @@ static bool brcmf_is_ibssmode(struct brc
+ return vif->wdev.iftype == NL80211_IFTYPE_ADHOC;
+ }
+
++/**
++ * brcmf_mon_add_vif() - create monitor mode virtual interface
++ *
++ * @wiphy: wiphy device of new interface.
++ * @name: name of the new interface.
++ */
++static struct wireless_dev *brcmf_mon_add_vif(struct wiphy *wiphy,
++ const char *name)
++{
++ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
++ struct brcmf_cfg80211_vif *vif;
++ struct net_device *ndev;
++ struct brcmf_if *ifp;
++ int err;
++
++ if (cfg->pub->mon_if) {
++ err = -EEXIST;
++ goto err_out;
++ }
++
++ vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_MONITOR);
++ if (IS_ERR(vif)) {
++ err = PTR_ERR(vif);
++ goto err_out;
++ }
++
++ ndev = alloc_netdev(sizeof(*ifp), name, NET_NAME_UNKNOWN, ether_setup);
++ if (!ndev) {
++ err = -ENOMEM;
++ goto err_free_vif;
++ }
++ ndev->type = ARPHRD_IEEE80211_RADIOTAP;
++ ndev->ieee80211_ptr = &vif->wdev;
++ ndev->needs_free_netdev = true;
++ ndev->priv_destructor = brcmf_cfg80211_free_netdev;
++ SET_NETDEV_DEV(ndev, wiphy_dev(cfg->wiphy));
++
++ ifp = netdev_priv(ndev);
++ ifp->vif = vif;
++ ifp->ndev = ndev;
++ ifp->drvr = cfg->pub;
++
++ vif->ifp = ifp;
++ vif->wdev.netdev = ndev;
++
++ err = brcmf_net_mon_attach(ifp);
++ if (err) {
++ brcmf_err("Failed to attach %s device\n", ndev->name);
++ free_netdev(ndev);
++ goto err_free_vif;
++ }
++
++ cfg->pub->mon_if = ifp;
++
++ return &vif->wdev;
++
++err_free_vif:
++ brcmf_free_vif(vif);
++err_out:
++ return ERR_PTR(err);
++}
++
++static int brcmf_mon_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev)
++{
++ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
++ struct net_device *ndev = wdev->netdev;
++
++ ndev->netdev_ops->ndo_stop(ndev);
++
++ brcmf_net_detach(ndev, true);
++
++ cfg->pub->mon_if = NULL;
++
++ return 0;
++}
++
+ static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy,
+ const char *name,
+ unsigned char name_assign_type,
+@@ -641,9 +718,10 @@ static struct wireless_dev *brcmf_cfg802
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_AP_VLAN:
+ case NL80211_IFTYPE_WDS:
+- case NL80211_IFTYPE_MONITOR:
+ case NL80211_IFTYPE_MESH_POINT:
+ return ERR_PTR(-EOPNOTSUPP);
++ case NL80211_IFTYPE_MONITOR:
++ return brcmf_mon_add_vif(wiphy, name);
+ case NL80211_IFTYPE_AP:
+ wdev = brcmf_ap_add_vif(wiphy, name, params);
+ break;
+@@ -826,9 +904,10 @@ int brcmf_cfg80211_del_iface(struct wiph
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_AP_VLAN:
+ case NL80211_IFTYPE_WDS:
+- case NL80211_IFTYPE_MONITOR:
+ case NL80211_IFTYPE_MESH_POINT:
+ return -EOPNOTSUPP;
++ case NL80211_IFTYPE_MONITOR:
++ return brcmf_mon_del_vif(wiphy, wdev);
+ case NL80211_IFTYPE_AP:
+ return brcmf_cfg80211_del_ap_iface(wiphy, wdev);
+ case NL80211_IFTYPE_P2P_CLIENT:
+@@ -6479,9 +6558,10 @@ static int brcmf_setup_ifmodes(struct wi
+ struct ieee80211_iface_limit *c0_limits = NULL;
+ struct ieee80211_iface_limit *p2p_limits = NULL;
+ struct ieee80211_iface_limit *mbss_limits = NULL;
+- bool mbss, p2p, rsdb, mchan;
+- int i, c, n_combos;
++ bool mon_flag, mbss, p2p, rsdb, mchan;
++ int i, c, n_combos, n_limits;
+
++ mon_flag = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MONITOR_FLAG);
+ mbss = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS);
+ p2p = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P);
+ rsdb = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_RSDB);
+@@ -6495,6 +6575,8 @@ static int brcmf_setup_ifmodes(struct wi
+ wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_AP);
++ if (mon_flag)
++ wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
+ if (p2p)
+ wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO) |
+@@ -6502,18 +6584,18 @@ static int brcmf_setup_ifmodes(struct wi
+
+ c = 0;
+ i = 0;
+- if (p2p && rsdb)
+- c0_limits = kcalloc(4, sizeof(*c0_limits), GFP_KERNEL);
+- else if (p2p)
+- c0_limits = kcalloc(3, sizeof(*c0_limits), GFP_KERNEL);
+- else
+- c0_limits = kcalloc(2, sizeof(*c0_limits), GFP_KERNEL);
++ n_limits = 1 + mon_flag + (p2p ? 2 : 0) + (rsdb || !p2p);
++ c0_limits = kcalloc(n_limits, sizeof(*c0_limits), GFP_KERNEL);
+ if (!c0_limits)
+ goto err;
+
+ combo[c].num_different_channels = 1 + (rsdb || (p2p && mchan));
+ c0_limits[i].max = 1 + rsdb;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
++ if (mon_flag) {
++ c0_limits[i].max = 1;
++ c0_limits[i++].types = BIT(NL80211_IFTYPE_MONITOR);
++ }
+ if (p2p) {
+ c0_limits[i].max = 1;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
+@@ -6562,14 +6644,20 @@ static int brcmf_setup_ifmodes(struct wi
+ if (mbss) {
+ c++;
+ i = 0;
+- mbss_limits = kcalloc(1, sizeof(*mbss_limits), GFP_KERNEL);
++ n_limits = 1 + mon_flag;
++ mbss_limits = kcalloc(n_limits, sizeof(*mbss_limits),
++ GFP_KERNEL);
+ if (!mbss_limits)
+ goto err;
+ mbss_limits[i].max = 4;
+ mbss_limits[i++].types = BIT(NL80211_IFTYPE_AP);
++ if (mon_flag) {
++ mbss_limits[i].max = 1;
++ mbss_limits[i++].types = BIT(NL80211_IFTYPE_MONITOR);
++ }
+ combo[c].beacon_int_infra_match = true;
+ combo[c].num_different_channels = 1;
+- combo[c].max_interfaces = 4;
++ combo[c].max_interfaces = 4 + mon_flag;
+ combo[c].n_limits = i;
+ combo[c].limits = mbss_limits;
+ }
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -690,7 +690,7 @@ fail:
+ return -EBADE;
+ }
+
+-static void brcmf_net_detach(struct net_device *ndev, bool rtnl_locked)
++void brcmf_net_detach(struct net_device *ndev, bool rtnl_locked)
+ {
+ if (ndev->reg_state == NETREG_REGISTERED) {
+ if (rtnl_locked)
+@@ -703,6 +703,72 @@ static void brcmf_net_detach(struct net_
+ }
+ }
+
++static int brcmf_net_mon_open(struct net_device *ndev)
++{
++ struct brcmf_if *ifp = netdev_priv(ndev);
++ struct brcmf_pub *drvr = ifp->drvr;
++ u32 monitor;
++ int err;
++
++ brcmf_dbg(TRACE, "Enter\n");
++
++ err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_MONITOR, &monitor);
++ if (err) {
++ bphy_err(drvr, "BRCMF_C_GET_MONITOR error (%d)\n", err);
++ return err;
++ } else if (monitor) {
++ bphy_err(drvr, "Monitor mode is already enabled\n");
++ return -EEXIST;
++ }
++
++ monitor = 3;
++ err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_MONITOR, monitor);
++ if (err)
++ bphy_err(drvr, "BRCMF_C_SET_MONITOR error (%d)\n", err);
++
++ return err;
++}
++
++static int brcmf_net_mon_stop(struct net_device *ndev)
++{
++ struct brcmf_if *ifp = netdev_priv(ndev);
++ struct brcmf_pub *drvr = ifp->drvr;
++ u32 monitor;
++ int err;
++
++ brcmf_dbg(TRACE, "Enter\n");
++
++ monitor = 0;
++ err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_MONITOR, monitor);
++ if (err)
++ bphy_err(drvr, "BRCMF_C_SET_MONITOR error (%d)\n", err);
++
++ return err;
++}
++
++static const struct net_device_ops brcmf_netdev_ops_mon = {
++ .ndo_open = brcmf_net_mon_open,
++ .ndo_stop = brcmf_net_mon_stop,
++};
++
++int brcmf_net_mon_attach(struct brcmf_if *ifp)
++{
++ struct brcmf_pub *drvr = ifp->drvr;
++ struct net_device *ndev;
++ int err;
++
++ brcmf_dbg(TRACE, "Enter\n");
++
++ ndev = ifp->ndev;
++ ndev->netdev_ops = &brcmf_netdev_ops_mon;
++
++ err = register_netdevice(ndev);
++ if (err)
++ bphy_err(drvr, "Failed to register %s device\n", ndev->name);
++
++ return err;
++}
++
+ void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on)
+ {
+ struct net_device *ndev;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+@@ -210,6 +210,8 @@ void brcmf_txflowblock_if(struct brcmf_i
+ void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
+ void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb);
+ void brcmf_netif_mon_rx(struct brcmf_if *ifp, struct sk_buff *skb);
++void brcmf_net_detach(struct net_device *ndev, bool rtnl_locked);
++int brcmf_net_mon_attach(struct brcmf_if *ifp);
+ void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on);
+ int __init brcmf_core_init(void);
+ void __exit brcmf_core_exit(void);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+@@ -38,6 +38,7 @@ static const struct brcmf_feat_fwcap brc
+ { BRCMF_FEAT_MCHAN, "mchan" },
+ { BRCMF_FEAT_P2P, "p2p" },
+ { BRCMF_FEAT_MONITOR, "monitor" },
++ { BRCMF_FEAT_MONITOR_FLAG, "rtap" },
+ { BRCMF_FEAT_MONITOR_FMT_RADIOTAP, "rtap" },
+ { BRCMF_FEAT_DOT11H, "802.11h" }
+ };
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
+@@ -23,6 +23,7 @@
+ * GSCAN: enhanced scan offload feature.
+ * FWSUP: Firmware supplicant.
+ * MONITOR: firmware can pass monitor packets to host.
++ * MONITOR_FLAG: firmware flags monitor packets.
+ * MONITOR_FMT_RADIOTAP: firmware provides monitor packets with radiotap header
+ * MONITOR_FMT_HW_RX_HDR: firmware provides monitor packets with hw/ucode header
+ * DOT11H: firmware supports 802.11h
+@@ -43,6 +44,7 @@
+ BRCMF_FEAT_DEF(GSCAN) \
+ BRCMF_FEAT_DEF(FWSUP) \
+ BRCMF_FEAT_DEF(MONITOR) \
++ BRCMF_FEAT_DEF(MONITOR_FLAG) \
+ BRCMF_FEAT_DEF(MONITOR_FMT_RADIOTAP) \
+ BRCMF_FEAT_DEF(MONITOR_FMT_HW_RX_HDR) \
+ BRCMF_FEAT_DEF(DOT11H)
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.h
+@@ -49,6 +49,8 @@
+ #define BRCMF_C_GET_PM 85
+ #define BRCMF_C_SET_PM 86
+ #define BRCMF_C_GET_REVINFO 98
++#define BRCMF_C_GET_MONITOR 107
++#define BRCMF_C_SET_MONITOR 108
+ #define BRCMF_C_GET_CURR_RATESET 114
+ #define BRCMF_C_GET_AP 117
+ #define BRCMF_C_SET_AP 118
projects / openwrt / staging / lynxis.git / commitdiff