Documentation: filesystems: Convert jfs.txt to

This converts the plain text documentation of jfs.txt to reStructuredText
format. Added to documentation build process and verified with
make htmldocs

Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index 33feab2f40840c426f55a545c14ede4e6a079b5c..2376cb91b83cb5cea8ff180f404a225b0a9e53b9 100644 (file)
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst
@@ -78,6 +78,7 @@ configure specific aspects of kernel behavior to your liking.
    ext4
    binderfs
    xfs
+   jfs
    pm/index
    thunderbolt
    LSM/index

diff --git a/Documentation/admin-guide/jfs.rst b/Documentation/admin-guide/jfs.rst
new file mode 100644 (file)
index 0000000..9e12d93
--- /dev/null
+++ b/Documentation/admin-guide/jfs.rst
@@ -0,0 +1,66 @@
+===========================================
+IBM's Journaled File System (JFS) for Linux
+===========================================
+
+JFS Homepage:  http://jfs.sourceforge.net/
+
+The following mount options are supported:
+
+(*) == default
+
+iocharset=name
+                Character set to use for converting from Unicode to
+               ASCII.  The default is to do no conversion.  Use
+               iocharset=utf8 for UTF-8 translations.  This requires
+               CONFIG_NLS_UTF8 to be set in the kernel .config file.
+               iocharset=none specifies the default behavior explicitly.
+
+resize=value
+                Resize the volume to <value> blocks.  JFS only supports
+               growing a volume, not shrinking it.  This option is only
+               valid during a remount, when the volume is mounted
+               read-write.  The resize keyword with no value will grow
+               the volume to the full size of the partition.
+
+nointegrity
+                Do not write to the journal.  The primary use of this option
+               is to allow for higher performance when restoring a volume
+               from backup media.  The integrity of the volume is not
+               guaranteed if the system abnormally abends.
+
+integrity(*)
+                Commit metadata changes to the journal.  Use this option to
+               remount a volume where the nointegrity option was
+               previously specified in order to restore normal behavior.
+
+errors=continue
+                        Keep going on a filesystem error.
+errors=remount-ro(*)
+                        Remount the filesystem read-only on an error.
+errors=panic
+                        Panic and halt the machine if an error occurs.
+
+uid=value
+                Override on-disk uid with specified value
+gid=value
+                Override on-disk gid with specified value
+umask=value
+                Override on-disk umask with specified octal value. For
+                directories, the execute bit will be set if the corresponding
+               read bit is set.
+
+discard=minlen, discard/nodiscard(*)
+                This enables/disables the use of discard/TRIM commands.
+               The discard/TRIM commands are sent to the underlying
+                block device when blocks are freed. This is useful for SSD
+                devices and sparse/thinly-provisioned LUNs.  The FITRIM ioctl
+               command is also available together with the nodiscard option.
+               The value of minlen specifies the minimum blockcount, when
+               a TRIM command to the block device is considered useful.
+               When no value is given to the discard option, it defaults to
+               64 blocks, which means 256KiB in JFS.
+               The minlen value of discard overrides the minlen value given
+               on an FITRIM ioctl().
+
+The JFS mailing list can be subscribed to by using the link labeled
+"Mail list Subscribe" at our web page http://jfs.sourceforge.net/

diff --git a/Documentation/filesystems/jfs.txt b/Documentation/filesystems/jfs.txt
deleted file mode 100644 (file)
index 41fd757..0000000
--- a/Documentation/filesystems/jfs.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-IBM's Journaled File System (JFS) for Linux
-
-JFS Homepage:  http://jfs.sourceforge.net/
-
-The following mount options are supported:
-(*) == default
-
-iocharset=name Character set to use for converting from Unicode to
-               ASCII.  The default is to do no conversion.  Use
-               iocharset=utf8 for UTF-8 translations.  This requires
-               CONFIG_NLS_UTF8 to be set in the kernel .config file.
-               iocharset=none specifies the default behavior explicitly.
-
-resize=value   Resize the volume to <value> blocks.  JFS only supports
-               growing a volume, not shrinking it.  This option is only
-               valid during a remount, when the volume is mounted
-               read-write.  The resize keyword with no value will grow
-               the volume to the full size of the partition.
-
-nointegrity    Do not write to the journal.  The primary use of this option
-               is to allow for higher performance when restoring a volume
-               from backup media.  The integrity of the volume is not
-               guaranteed if the system abnormally abends.
-
-integrity(*)   Commit metadata changes to the journal.  Use this option to
-               remount a volume where the nointegrity option was
-               previously specified in order to restore normal behavior.
-
-errors=continue                Keep going on a filesystem error.
-errors=remount-ro(*)   Remount the filesystem read-only on an error.
-errors=panic           Panic and halt the machine if an error occurs.
-
-uid=value      Override on-disk uid with specified value
-gid=value      Override on-disk gid with specified value
-umask=value    Override on-disk umask with specified octal value.  For
-               directories, the execute bit will be set if the corresponding
-               read bit is set.
-
-discard=minlen This enables/disables the use of discard/TRIM commands.
-discard                The discard/TRIM commands are sent to the underlying
-nodiscard(*)   block device when blocks are freed. This is useful for SSD
-               devices and sparse/thinly-provisioned LUNs.  The FITRIM ioctl
-               command is also available together with the nodiscard option.
-               The value of minlen specifies the minimum blockcount, when
-               a TRIM command to the block device is considered useful.
-               When no value is given to the discard option, it defaults to
-               64 blocks, which means 256KiB in JFS.
-               The minlen value of discard overrides the minlen value given
-               on an FITRIM ioctl().
-
-The JFS mailing list can be subscribed to by using the link labeled
-"Mail list Subscribe" at our web page http://jfs.sourceforge.net/