#include <dhd_dbg.h>
#include "firmware.h"
-#include "usb_rdl.h"
#include "usb.h"
+
#define IOCTL_RESP_TIMEOUT 2000
#define BRCMF_USB_RESET_GETVER_SPINWAIT 100 /* in unit of ms */
#define BRCMF_USB_43242_FW_NAME "brcm/brcmfmac43242a.bin"
#define BRCMF_USB_43569_FW_NAME "brcm/brcmfmac43569.bin"
+#define TRX_MAGIC 0x30524448 /* "HDR0" */
+#define TRX_MAX_OFFSET 3 /* Max number of file offsets */
+#define TRX_UNCOMP_IMAGE 0x20 /* Trx holds uncompressed img */
+#define TRX_RDL_CHUNK 1500 /* size of each dl transfer */
+#define TRX_OFFSETS_DLFWLEN_IDX 0
+
+/* Control messages: bRequest values */
+#define DL_GETSTATE 0 /* returns the rdl_state_t struct */
+#define DL_CHECK_CRC 1 /* currently unused */
+#define DL_GO 2 /* execute downloaded image */
+#define DL_START 3 /* initialize dl state */
+#define DL_REBOOT 4 /* reboot the device in 2 seconds */
+#define DL_GETVER 5 /* returns the bootrom_id_t struct */
+#define DL_GO_PROTECTED 6 /* execute the downloaded code and set reset
+ * event to occur in 2 seconds. It is the
+ * responsibility of the downloaded code to
+ * clear this event
+ */
+#define DL_EXEC 7 /* jump to a supplied address */
+#define DL_RESETCFG 8 /* To support single enum on dongle
+ * - Not used by bootloader
+ */
+#define DL_DEFER_RESP_OK 9 /* Potentially defer the response to setup
+ * if resp unavailable
+ */
+
+/* states */
+#define DL_WAITING 0 /* waiting to rx first pkt */
+#define DL_READY 1 /* hdr was good, waiting for more of the
+ * compressed image
+ */
+#define DL_BAD_HDR 2 /* hdr was corrupted */
+#define DL_BAD_CRC 3 /* compressed image was corrupted */
+#define DL_RUNNABLE 4 /* download was successful,waiting for go cmd */
+#define DL_START_FAIL 5 /* failed to initialize correctly */
+#define DL_NVRAM_TOOBIG 6 /* host specified nvram data exceeds DL_NVRAM
+ * value
+ */
+#define DL_IMAGE_TOOBIG 7 /* firmware image too big */
+
+
+struct trx_header_le {
+ __le32 magic; /* "HDR0" */
+ __le32 len; /* Length of file including header */
+ __le32 crc32; /* CRC from flag_version to end of file */
+ __le32 flag_version; /* 0:15 flags, 16:31 version */
+ __le32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of
+ * header
+ */
+};
+
+struct rdl_state_le {
+ __le32 state;
+ __le32 bytes;
+};
+
+struct bootrom_id_le {
+ __le32 chip; /* Chip id */
+ __le32 chiprev; /* Chip rev */
+ __le32 ramsize; /* Size of RAM */
+ __le32 remapbase; /* Current remap base address */
+ __le32 boardtype; /* Type of board */
+ __le32 boardrev; /* Board revision */
+};
+
struct brcmf_usb_image {
struct list_head list;
s8 *fwname;
brcmf_dbg(USB, "Enter, fw %p, len %d\n", fw, fwlen);
- bulkchunk = kmalloc(RDL_CHUNK, GFP_ATOMIC);
+ bulkchunk = kmalloc(TRX_RDL_CHUNK, GFP_ATOMIC);
if (bulkchunk == NULL) {
err = -ENOMEM;
goto fail;
/* Wait until the usb device reports it received all
* the bytes we sent */
if ((rdlbytes == sent) && (rdlbytes != dllen)) {
- if ((dllen-sent) < RDL_CHUNK)
+ if ((dllen-sent) < TRX_RDL_CHUNK)
sendlen = dllen-sent;
else
- sendlen = RDL_CHUNK;
+ sendlen = TRX_RDL_CHUNK;
/* simply avoid having to send a ZLP by ensuring we
* never have an even
kfree(devinfo->rx_reqs);
}
-#define TRX_MAGIC 0x30524448 /* "HDR0" */
-#define TRX_VERSION 1 /* Version 1 */
-#define TRX_MAX_LEN 0x3B0000 /* Max length */
-#define TRX_NO_HEADER 1 /* Do not write TRX header */
-#define TRX_MAX_OFFSET 3 /* Max number of individual files */
-#define TRX_UNCOMP_IMAGE 0x20 /* Trx contains uncompressed image */
-
-struct trx_header_le {
- __le32 magic; /* "HDR0" */
- __le32 len; /* Length of file including header */
- __le32 crc32; /* CRC from flag_version to end of file */
- __le32 flag_version; /* 0:15 flags, 16:31 version */
- __le32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of
- * header */
-};
static int check_file(const u8 *headers)
{
+++ /dev/null
-/*
- * Copyright (c) 2011 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _USB_RDL_H
-#define _USB_RDL_H
-
-/* Control messages: bRequest values */
-#define DL_GETSTATE 0 /* returns the rdl_state_t struct */
-#define DL_CHECK_CRC 1 /* currently unused */
-#define DL_GO 2 /* execute downloaded image */
-#define DL_START 3 /* initialize dl state */
-#define DL_REBOOT 4 /* reboot the device in 2 seconds */
-#define DL_GETVER 5 /* returns the bootrom_id_t struct */
-#define DL_GO_PROTECTED 6 /* execute the downloaded code and set reset
- * event to occur in 2 seconds. It is the
- * responsibility of the downloaded code to
- * clear this event
- */
-#define DL_EXEC 7 /* jump to a supplied address */
-#define DL_RESETCFG 8 /* To support single enum on dongle
- * - Not used by bootloader
- */
-#define DL_DEFER_RESP_OK 9 /* Potentially defer the response to setup
- * if resp unavailable
- */
-
-/* states */
-#define DL_WAITING 0 /* waiting to rx first pkt */
-#define DL_READY 1 /* hdr was good, waiting for more of the
- * compressed image */
-#define DL_BAD_HDR 2 /* hdr was corrupted */
-#define DL_BAD_CRC 3 /* compressed image was corrupted */
-#define DL_RUNNABLE 4 /* download was successful,waiting for go cmd */
-#define DL_START_FAIL 5 /* failed to initialize correctly */
-#define DL_NVRAM_TOOBIG 6 /* host specified nvram data exceeds DL_NVRAM
- * value */
-#define DL_IMAGE_TOOBIG 7 /* download image too big (exceeds DATA_START
- * for rdl) */
-
-struct rdl_state_le {
- __le32 state;
- __le32 bytes;
-};
-
-struct bootrom_id_le {
- __le32 chip; /* Chip id */
- __le32 chiprev; /* Chip rev */
- __le32 ramsize; /* Size of RAM */
- __le32 remapbase; /* Current remap base address */
- __le32 boardtype; /* Type of board */
- __le32 boardrev; /* Board revision */
-};
-
-#define RDL_CHUNK 1500 /* size of each dl transfer */
-
-#define TRX_OFFSETS_DLFWLEN_IDX 0
-#define TRX_OFFSETS_JUMPTO_IDX 1
-#define TRX_OFFSETS_NVM_LEN_IDX 2
-
-#define TRX_OFFSETS_DLBASE_IDX 0
-
-#endif /* _USB_RDL_H */
projects / openwrt / staging / blogic.git / commitdiff