Now that we introduced an additional multiplexing/demultiplexing layer
with commit
3e8a72d1dae37 ("net: dsa: reduce number of protocol hooks")
that lives within the DSA code, we no longer need to have a given switch
driver tag_protocol be an actual ethertype value, instead, we can
replace it with an enum: dsa_tag_protocol.
Do this replacement in the drivers, which allows us to get rid of the
cpu_to_be16()/htons() dance, and remove ETH_P_BRCMTAG since we do not
need it anymore.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
}
static struct dsa_switch_driver bcm_sf2_switch_driver = {
- .tag_protocol = htons(ETH_P_BRCMTAG),
+ .tag_protocol = DSA_TAG_PROTO_BRCM,
.priv_size = sizeof(struct bcm_sf2_priv),
.probe = bcm_sf2_sw_probe,
.setup = bcm_sf2_sw_setup,
}
static struct dsa_switch_driver mv88e6060_switch_driver = {
- .tag_protocol = htons(ETH_P_TRAILER),
+ .tag_protocol = DSA_TAG_PROTO_TRAILER,
.probe = mv88e6060_probe,
.setup = mv88e6060_setup,
.set_addr = mv88e6060_set_addr,
*/
val = 0x0433;
if (dsa_is_cpu_port(ds, p)) {
- if (ds->dst->tag_protocol == htons(ETH_P_EDSA))
+ if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
val |= 0x3300;
else
val |= 0x0100;
}
struct dsa_switch_driver mv88e6123_61_65_switch_driver = {
- .tag_protocol = cpu_to_be16(ETH_P_EDSA),
+ .tag_protocol = DSA_TAG_PROTO_EDSA,
.priv_size = sizeof(struct mv88e6xxx_priv_state),
.probe = mv88e6123_61_65_probe,
.setup = mv88e6123_61_65_setup,
}
struct dsa_switch_driver mv88e6131_switch_driver = {
- .tag_protocol = cpu_to_be16(ETH_P_DSA),
+ .tag_protocol = DSA_TAG_PROTO_DSA,
.priv_size = sizeof(struct mv88e6xxx_priv_state),
.probe = mv88e6131_probe,
.setup = mv88e6131_setup,
#include <linux/phy.h>
#include <linux/phy_fixed.h>
-/* Not an official ethertype value, used only internally for DSA
- * demultiplexing
- */
-#define ETH_P_BRCMTAG (ETH_P_XDSA + 1)
+enum dsa_tag_protocol {
+ DSA_TAG_PROTO_NONE = 0,
+ DSA_TAG_PROTO_DSA,
+ DSA_TAG_PROTO_TRAILER,
+ DSA_TAG_PROTO_EDSA,
+ DSA_TAG_PROTO_BRCM,
+};
#define DSA_MAX_SWITCHES 4
#define DSA_MAX_PORTS 12
*/
struct net_device *master_netdev;
const struct dsa_device_ops *ops;
- __be16 tag_protocol;
+ enum dsa_tag_protocol tag_protocol;
/*
* The switch and port to which the CPU is attached.
struct dsa_switch_driver {
struct list_head list;
- __be16 tag_protocol;
+ enum dsa_tag_protocol tag_protocol;
int priv_size;
/*
static inline bool dsa_uses_tagged_protocol(struct dsa_switch_tree *dst)
{
- return dst->tag_protocol != 0;
+ return dst->tag_protocol != DSA_TAG_PROTO_NONE;
}
#endif
switch (ds->dst->tag_protocol) {
#ifdef CONFIG_NET_DSA_TAG_DSA
- case htons(ETH_P_DSA):
+ case DSA_TAG_PROTO_DSA:
ds->dst->ops = &dsa_netdev_ops;
break;
#endif
#ifdef CONFIG_NET_DSA_TAG_EDSA
- case htons(ETH_P_EDSA):
+ case DSA_TAG_PROTO_EDSA:
ds->dst->ops = &edsa_netdev_ops;
break;
#endif
#ifdef CONFIG_NET_DSA_TAG_TRAILER
- case htons(ETH_P_TRAILER):
+ case DSA_TAG_PROTO_TRAILER:
ds->dst->ops = &trailer_netdev_ops;
break;
#endif
#ifdef CONFIG_NET_DSA_TAG_BRCM
- case htons(ETH_P_BRCMTAG):
+ case DSA_TAG_PROTO_BRCM:
ds->dst->ops = &brcm_netdev_ops;
break;
#endif
/* Queue the SKB for transmission on the parent interface, but
* do not modify its EtherType
*/
- skb->protocol = htons(ETH_P_BRCMTAG);
skb->dev = p->parent->dst->master_netdev;
dev_queue_xmit(skb);