--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6328.dtsi"
+
+/ {
+ model = "NuCom R5010UNv2";
+ compatible = "nucom,r5010unv2", "brcm,bcm6328";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+ };
+
+ bcm43217-sprom {
+ compatible = "brcm,bcma-sprom";
+
+ pci-bus = <1>;
+ pci-dev = <0>;
+
+ nvmem-cells = <&macaddr_cfe_6a0>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+
+ brcm,sprom = "brcm/bcm43217-sprom.bin";
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+ðernet {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_cfe_6a0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&hsspi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <16666667>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cfe: partition@0 {
+ label = "cfe";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ partition@10000 {
+ compatible = "brcm,bcm963xx-imagetag";
+ label = "firmware";
+ reg = <0x010000 0xfe0000>;
+ };
+
+ partition@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ };
+ };
+ };
+};
+
+&leds {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
+ &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led
+ &pinctrl_leds>;
+
+ led@1 {
+ reg = <1>;
+ active-low;
+ label = "green:internet";
+ };
+
+ led@2 {
+ reg = <2>;
+ active-low;
+ label = "red:internet";
+ };
+
+ led@3 {
+ reg = <3>;
+ active-low;
+ label = "green:dsl";
+ };
+
+ led_power_green: led@4 {
+ reg = <4>;
+ active-low;
+ label = "green:power";
+ };
+
+ led_power_red: led@5 {
+ reg = <5>;
+ active-low;
+ label = "red:power";
+ panic-indicator;
+ };
+
+ led@10 {
+ reg = <10>;
+ active-low;
+ label = "green:wps";
+ };
+
+ led@11 {
+ reg = <11>;
+ active-low;
+ label = "green:usb";
+ };
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl_leds: leds {
+ function = "led";
+ pins = "gpio1", "gpio2", "gpio3",
+ "gpio4", "gpio5", "gpio10",
+ "gpio11";
+ };
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+
+ phy-handle = <&phy1>;
+ phy-mode = "mii";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+
+ phy-handle = <&phy2>;
+ phy-mode = "mii";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+
+ phy-handle = <&phy3>;
+ phy-mode = "mii";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+
+ phy-handle = <&phy4>;
+ phy-mode = "mii";
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usbh {
+ status = "okay";
+};
+
+&cfe {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_cfe_6a0: macaddr@6a0 {
+ reg = <0x6a0 0x6>;
+ };
+};
projects / openwrt / staging / blocktrron.git / commitdiff